OS/400 Nachrichten

Suchen Sie die Beschreibung zu OS/400 (System i) Nachrichten z. B. die CPG9801? Dann sind Sie hier genau richtig. Im Folgenden sehen Sie die (hoffentlich) vollständigen OS/400 Nachrichten mit allen „erweiterten Hilfetexten“.

Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43


Komplette OS/400 Nachrichten Dokumentation von PEX1005 bis PMT0099

Komplette OS/400 Nachrichten Dokumentation von PEX1005 bis PMT0099

Diese Dokumentation steht unter dem Copyright der IBM.
Count: 1401 Skipped: 0
OS/400 Nachrichten
Beschreibung
DUMP TERMINATED. UNABLE TO MATERIALIZE THE OBJECT MAPPING TABLE.
NOT ADDRESSABLE
**INVALID DATA
CANNOT DUMP - SPACE ADDRESSING OR BOUNDARY ALIGNMENT EXCEPTION
ACTUAL POINTER TYPE
SPACE OFFSET
CANNOT MATERIALIZE
*INVALID CURRENT LENGTH
CHARACTERS ARE DUMPED
CURRENT LENGTH:
POINTER
STATEMENT &1
INSTRUCTION NUMBER
OBJECT &1
CONTEXT &1
&1 OF &2 SUPPRESSED
ERROR OCCURRED WHILE MATERIALIZING THE PROGRAM TEMPLATE.
ERROR OCCURRED WHILE MATERIALIZING THE POINTER TO THE PSSA.
ERROR OCCURRED WHILE LOCATING THE PSSA ENTRY FOR THE PROGRAM.
ERROR OCCURRED WHILE DOING THE INITIALIZATION CODE FOR THE PROGRAM.
PROGRAM SYMBOLIC DUMP TERMINATED ABNORMALLY.
NAME
OFFSET
ATTRIBUTES
VALUE
VALUE IN HEX
Snap dump for &1 on-unit
Operator requested error dump
QPESERR terminating dump
ERROR
ENDFILE
ENDPAGE
KEY
TRANSMIT
UNDEFINEDFILE
TRACE OF CURRENT DSA STACK
Program Name - &1
DSA BLOCK NUMBER - &1
Block Name - &1
END OF DSA TRACE
From Statement - &1
ONCODE - &1
Message Number - &1
ONFILE - &1
ONKEY
Error Information
HEX DUMP OF STATIC SPACE
HEX DUMP OF STACK SPACE
HEX DUMP OF EXTERNAL HEAP SPACE
HEX DUMP OF BASED HEAP SPACE
END OF HEX DUMP
SAME AS ABOVE
SYMBOLIC DUMP OF &1 BLOCK &2 FOR PROGRAM &3
STATIC INTERNAL STORAGE
AUTOMATIC STORAGE
STATIC EXTERNAL STORAGE
BASED STORAGE
PARAMETER STORAGE
COMPILER INTERNAL STORAGE
&1 &2 PLIDUMP CALLED FROM STATEMENT &4 PROGRAM &3.
CURRENT OPTIONS IN EFFECT (
TRACE
NOTRACE
FILE
NOFILE
VARIABLES
NOVARIABLES
HEXADECIMAL
NOHEXADECIMAL
CONTINUE
STOP
SYMBOLIC DUMP OF FILE &1
Status - &1
Last Operation - &1
COMPLETED FILE ATTRIBUTES
ENVIRONMENTAL ATTRIBUTES
Separate Indicators - &1
Actual File Name - &1
INPUT BUFFER
OUTPUT BUFFER
Start Performance Tools
Library
Job description
Library
Print System Report
Print Transaction Report
Change Job Type
Print Component Report
Analyze Performance Data
Change Performance Print File
Device
Print Device
Page size
Length--lines per page
Width--positions per line
Lines per inch
Characters per inch
Overflow line number
Print Job Interval Report
Print Resource Report
Print Pool Report
Model System
Library
Batch job description
Data base file member
Data base file library
Job name
User
Number
Output file member
Output file library
Write to data base file
Member text
Print Job Trace Report
Starting sequence number
Ending sequence number
Transaction ending program
Transaction starting program
Start Job Trace
Maximum storage
1-4000000 K
Thread ID to include
Thread ID, *ALL
End Job Trace
Print Job Trace
System model code
Application libraries
Analyze Programs
Analyze Database Files
Analyze Database File Keys
Physical file
Min number of logical files
Start Sampled Address Monitor
Program to monitor
Pane size
Program name
Module name
Procedure name
Program type
Start SAM Internal
VMC program
Instruction window
Starting virtual address
Number of panes
Window identifier
Start SAM Data Collection
Sampling interval
1-63 milliseconds
End SAM Data Collection
Write to database file
Data set title
End Sampled Address Monitor
Print SAM Data
Report type
Print Lock Report
First run for current data
Minimum wait time
0-30000 milliseconds
Disk unit
Object specifications
Object class
Start Disk Data Collection
Trace full
End Disk Data Collection
Stop trace
Print Disk Activity Report
Copy Performance Data
From member
From library
To member
To library
Display Performance Data
Member
Library
Work with System Activity
Output
Interval length
Number of intervals
Sequence
Type of information
Print Activity Report
Report type
Title
Number of jobs
1 - 900 seconds
Start Performance Graphics
Delete Performance Data
Create Graph Format
Graph format
Text 'description'
Title
Subtitle
Graph type
Data type
Area fill
Background color
Reference line
X-axis
Range
First
Last
Color
Y-axis
Functional area
Legend 'description'
Shading pattern
Line type
Line width
Non-graphic display symbol
Character
Job type
Lower priority boundary
Label
Graph formats library
Performance data library
Delete Historical Data
Variable
Functional area entry
Job type entry
Job priority entry
Change Graph Format
IOP data entry
Disk data entry
All data entry
Type of utilization
Upper priority boundary
Create Historical Data
Functional Area Library
Replace
Create Graph Package
Format
Graph package
Change Graph Package
Copy Graph Format
From format
To format
Copy Graph Package
From package
To package
Delete Graph Format
Delete Graph Package
Work with Functional Areas
Create Functional Area
Delete Functional Area
Change Functional Area
Display Performance Graph
Display Historical Graph
Functional area
Graph format or package
Plotter speed
Plotter pen width
Printer device or type
Legend
Output file
Copy Functional Area
From functional area
To functional area
Output queue
Create historical data
Plotter address
Type
Replace or add records
Create historical data
Communications line entry
Communications line
Member name
Page length
Member
Library
Report type
Report title
Measurement profile
Time period for report
Starting time
Ending time
Report option
Starting date
Ending date
Select jobs
Omit jobs
Select users
Omit users
Select pools
Select subsystems
Omit pools
Omit subsystems
Select communications lines
Omit communications lines
Select control units
Omit control units
Select locations
Omit locations
Select functional areas
Omit functional areas
Job description
Job name
User
Number
Library
Data type
Omit system tasks
Type of information
Report detail
Thread
Select job type
Omit job type
Select job run priority
Omit job run priority
Highest priority
Lowest priority
Print PEX Report
Trace options
Sort by
Omit completion records
Omit Category
Stats options
Summarize by
Profile options
Filter percentage
Order
File to receive output
Output member options
Member to receive output
Replace or add records
Select trace type
Start time and date
End time and date
Number of threads
Task information
Could not add library &1 to library list.
Cannot enter the performance tools a second time.
Cannot enter the performance tools a second time.
Value must be in the range 0-999.
Value must be in the range 0-60.
Only valid values can be specified.
Value must be in the range 1-3.
Value must be in the range 0-9.
Collection Services job has been submitted.
Field is not a valid name.
Performance monitor cannot be started.
Collection Services already stopped.
Field value is not a valid time.
Cannot start a second performance monitor job.
The selected option is not valid.
Performance monitor is ending.
Field value not valid.
Value must be in the range 0-23.
Value must be in the range 1-24.
Field value is not valid.
Choose a 1, 2, or 3 for the specified member to be printed.
Select one member to be printed.
Specify all values either 1 or 2.
More than 50 items were selected.
Select a report and press Enter.
Library &1 does not contain any performance data.
Field value is not valid.
Stop day and time cannot occur before start day and time.
Field value is not valid.
Value is not in the range 1-64.
Select option 4 for the performance members you want deleted.
&1 item was not deleted. It was in use.
Selected report is not a valid option for &1.
Select a category and press Enter or press F6.
Profile &1 in library &2 already exists.
No jobs
No user IDs
No subsystems
No pools
No communication lines
No control units
No functional areas
No performance data in library
No time intervals
No items deleted because STRDBG with UPDPROD (*NO) is in use.
&4 items were deleted and &5 items were not deleted.
Type option number.
The Functional area is in use. Try again later.
Not authorized to delete performance data.
Select only one histogram.
No recommendations to process.
Unable to process your request. System memory configuration changed.
Unable to process request. No QAPMSBSD file for this Member and Library.
Errors occurred. Recovery completed, original values restored.
Unrecoverable errors occurred. See joblog for details.
System tuned to advisor recommendations. Processing completed.
System tuned to data collection values. Processing completed.
Cannot process request because of missing data.
Unable to process request. The data was collected on a different system.
Performance analysis of member &2/&1 started.
(No recommendations generated)
(No other information generated)
Interval size may be too large.
Subsystem started or stopped.
Pool analysis stopped.
Pool analysis stopped.
Print completed.
:T No performance problems on listed DDI lines.
:T Receive Not Ready frames received by DDI line.
:T Receive Not Ready frames received by DDI line.
:T Receive Not Ready frames transmitted by DDI line.
:T Receive Not Ready frames transmitted by DDI line.
:T Reject frames transmitted by DDI line.
:T Reject frames transmitted by DDI line.
:T Reject frames received by DDI line.
:T Reject frames received by DDI line.
:T DDI had MAC errors.
:T DDI had MAC errors.
:T DDI had T1 timer ends.
:T DDI had T1 timer ends.
:T DDI had UI frame activity.
:T DDI had UI frame activity.
:T DDI utilizations exceeded &2% guideline.
:T DDI utilization exceeded &2% guideline.
:T No performance problems on listed SDLC lines.
:T SDLC utilizations exceeded &2% guideline.
:T SDLC utilizations approached &2% guideline.
:T SDLC utilizations exceeded &2% guideline. Errors occurred.
:T SDLC utilizations approached &2% guideline. Errors occurred.
:T SDLC lines had frames sent again.
:T SDLC lines had frames received in error.
:T SDLC lines had receive not ready frames received.
:T SDLC had receive not ready frames transmitted.
:T SDLC had data link resets.
:T SDLC had invalid frames received.
:T SDLC lines had connect poll retries.
:T SDLC utilization exceeded &2% guideline.
:T SDLC utilization approached &2% guideline.
:T SDLC utilization exceeded &2% guideline. Errors.
:T SDLC utilization approached &2% guideline. Errors.
:T SDLC had frames sent again.
:T SDLC had frames received in error.
:T SDLC had receive not ready frames received.
:T SDLC had receive not ready frames transmitted.
:T SDLC had data link resets.
:T SDLC had invalid frames received.
:T SDLC had connect poll retries.
:T No performance problems on listed ASYNC lines.
:T ASYNC utilizations exceeded &2% guideline.
:T ASYNC utilizations approached &2% guideline.
:T ASYNC utilizations exceeded &2% guideline. Errors.
:T ASYNC utilizations approached &2% guideline. Errors.
:T ASYNC lines had data received in error.
:T ASYNC utilization exceeded &2% guideline.
:T ASYNC utilization approached &2% guideline.
:T ASYNC utilization exceeded &2% guideline.
:T ASYNC utilization approached &2% guideline.
:T ASYNC had data received in error.
:T No performance problems found on listed BSC lines.
:T BSC utilization exceeded &2% guideline.
:T BSC utilizations approached &2% guideline.
:T BSC utilizations exceeded &2% guideline. Errors.
:T BSC utilizations approached &2% guideline. Errors.
:T BSC had data received in error.
:T BSC had acknowledgement errors.
:T BSC had abnormal ends.
:T BSC had data sent again.
:T BSC utilization exceeded &2% guideline.
:T BSC utilization approached &2% guideline.
:T BSC utilization exceeded &2% guideline.
:T BSC utilization approached &2% guideline.
:T BSC had data received in error.
:T BSC had data acknowledgement errors.
:T BSC had abnormal ends.
:T BSC had data sent again.
:T No performance problems found on listed X25 lines.
:T X25 utilizations exceeded &2% guideline.
:T X25 utilizations approached &2% guideline.
:T X25 utilizations exceeded &2% guideline. Errors.
:T X25 utilizations approached &2% guideline. Errors.
:T X25 lines had frames sent again.
:T X25 had data received in error.
:T X25 had receive not ready frames received.
:T X25 had receive not ready frames transmitted.
:T X.25 had data link resets.
:T X25 had invalid frames received.
:T X25 utilization exceeded &2% guideline.
:T X25 utilization approached &2% guideline.
:T X25 utilization exceeded &2% guideline.
:T X25 utilization approached &2% guideline.
:T X25 had frames sent again.
:T X25 had frames received in error.
:T X25 had receive not ready frames received.
:T X25 had receive not ready frames transmitted.
:T X25 had data link resets.
:T X25 received invalid frames.
:T No performance problems on listed Frame Relay lines.
:T Receive Not Ready frames received by FRLY line.
:T Receive Not Ready frames received by FRLY line.
:T Receive Not Ready frames transmitted by FRLY line.
:T Receive Not Ready frames transmitted by FRLY line.
:T Reject frames transmitted by FRLY line.
:T Reject frames transmitted by FRLY line.
:T Reject frames received by FRLY line.
:T Reject frames received by FRLY line.
:T FRLY had MAC errors.
:T FRLY had MAC errors.
:T FRLY had T1 timer ends.
:T FRLY had T1 timer ends.
:T FRLY had LMI timeouts.
:T FRLY had LMI timeouts.
:T FRLY had UI frame activity.
:T FRLY had UI frame activity.
:T FRLY utilizations exceeded &2% guideline.
:T FRLY utilization exceeded &2% guideline.
:T No performance problems found on listed TRLAN lines.
On Token Ring LAN line &1, utilization exceeded the guideline of &2%.
On Token Ring LAN line &1, utilization approached the guideline of &2%.
Token Ring LAN line &1, utilization exceeded he guideline of &2%, but transmission errors occurred.
On Token Ring line &1, utilization approached the guideline of 2%, but transmission errors occurred.
:T TRLAN lines had frames sent again.
:T TRLAN lines had frames received in error.
:T Receive Not Ready frames received by TRLAN line.
:T Receive Not Ready frames transmitted by TRLAN line.
:T Reject frames transmitted by TRLAN line.
:T Reject frames received by TRLAN line.
:T TRLAN had T1 timer ends.
:T TRLAN had MAC errors.
:T TRLAN had frames sent again.
:T TRLAN had frames received in error.
:T Receive Not Ready frames received by TRLAN line.
:T Receive Not Ready frames transmitted by TRLAN line.
:T SDLC utilizations exceeded &2% guideline.
:T SDLC utilizations exceeded &2% guideline.
:T Reject frames transmitted by TRLAN line.
:T Reject frames received by TRLAN line.
:T TRLAN had T1 timer ends.
:T TRLAN had MAC errors.
:T TRLAN had UI frame activity.
:T TRLAN had UI frame activity.
:T Receive Not Ready frames received by TRLAN station.
:T Receive Not Ready frames received by TRLAN station.
:T Receive Not Ready frames transmitted by TRLAN station.
:T Receive Not Ready frames transmitted by TRLAN station.
:T Reject frames received by TRLAN station.
:T Reject frames received by TRLAN station.
:T Reject frames transmitted by TRLAN station.
:T Reject frames transmitted by TRLAN station.
:T Frames retransmitted by TRLAN station.
:T Frames retransmitted by TRLAN station.
:T TRLAN station had T1 timer ends.
:T TRLAN station had T1 timer ends.
:T No performance problems on listed ISDN D-Channels.
:T ISDN receive utilization exceeded &2% guideline.
:T ISDN receive utilizations approached &2% guideline.
:T ISDN send utilization exceeded &2% guideline.
:T ISDN send utilizations approached &2% guideline.
:T ISDN alignment errors exceeded guideline of &2.
:T ISDN alignment errors exceeded guideline of &2.
:T ISDN D-Channel local end code violations exceeded guideline of &2.
:T ISDN local end code violation exceeded guideline of &2.
:T ISDN D-channel DTSE-in errors exceeded guideline of &2.
:T ISDN DTSE-in errors exceeded guideline of &2.
:T ISDN D-channel DTSE-out errors exceeded guideline of &2.
:T ISDN DTSE-out errors exceeded guideline of &2.
:T ISDN far end code violations exceeded guideline of &2.
:T ISDN far end code violation exceeded guideline of &2.
:T ISDN errored seconds exceeded guideline of &2.
:T ISDN errored seconds exceeded guideline of &2.
:T ISDN severely errored seconds exceeded guideline of &2 .
:T ISDN severely errored seconds exceeded guideline of &2.
:T ISDN D-Channel collisions exceeded guideline of &2.
:T ISDN D-Channel collisions exceeded guideline of &2.
:T ISDN rejected outgoing calls exceeded guideline of &2.
:T ISDN rejected outgoing calls exceeded guideline of &2.
:T ISDN rejected incoming calls exceeded guideline of &2.
:T ISDN rejected incoming calls exceeded guideline of &2.
:T ISDN D-Channel CRC errors exceeded guideline of &2.
:T ISDN D-Channel CRC errors exceeded guideline of &2.
:T ISDN short frame errors exceeded guideline of &2.
:T ISDN short frame errors exceeded guideline of &2.
:T ISDN D-Channel aborts exceeded guideline of &2.
:T ISDN D-Channel aborts exceeded guideline of &2.
:T ISDN retransmitted frames exceeded guideline of &2.
:T ISDN retransmitted frames exceeded guideline of &2.
:T ISDN sequence errors exceeded guideline of &2.
:T ISDN sequence errors exceeded guideline of &2.
:T No performance problems on listed Ethernet lines.
On Ethernet LAN line &1, utilization exceeded the guideline of &2%.
On Ethernet LAN line &1, utilization approached the guideline of &2%.
Ethernet LAN line &1, utilization exceeded guideline of &2%, but transmission errors occurred.
On Ethernet line &1, utilization approached the guideline of 2%, but transmission errors occurred.
:T Receive Not Ready frames received by Ethernet LAN line.
:T Receive Not Ready frames transmitted by Ethernet LAN line.
:T Reject frames received by Ethernet LAN line.
:T Reject frames transmitted by Ethernet LAN line.
:T Ethernet LAN had MAC errors.
:T Ethernet LAN had T1 timer ends.
:T Receive Not Ready frames received by Ethernet LAN line.
:T Receive Not Ready frames transmitted by Ethernet LAN line.
:T Reject frames received by Ethernet LAN line.
:T Reject frames transmitted by Ethernet LAN line.
:T Ethernet LAN had MAC errors.
:T Ethernet LAN had T1 timer ends.
:T Ethernet LAN had UI frame activity.
:T Ethernet LAN had UI frame activity.
:T Receive Not Ready frames received by Ethernet station.
:T Receive Not Ready frames received by Ethernet station.
:T Receive Not Ready frames transmitted by Ethernet station.
:T Receive Not Ready frames transmitted by Ethernet station.
:T Reject frames received by Ethernet station.
:T Reject frames received by Ethernet station.
:T Reject frames transmitted by Ethernet station.
:T Reject frames transmitted by Ethernet station.
:T Frames retransmitted by Ethernet station.
:T Frames retransmitted by Ethernet station.
:T Ethernet station had T1 timer ends.
:T Ethernet station had T1 timer ends.
No performance problems found in pools data.
:T Pool fault rates exceeded guideline.
:T Pool fault rates approached guideline.
:T Pool fault rates below guideline.
:T Pool activity level waiting exceeded &2 guideline.
:T Pool activity level waiting excessive. Guideline &2.
:T Pool fault rate zero in all intervals.
System fault rate exceeded the guideline of &2.
System fault rate approached guideline of &2.
No excess storage to move to high faulting pools.
:T Active-to-Ineligible ratio exceeds &2 guideline.
:T Increase activity level in listed pools.
:T Decrease activity level in listed pools.
Add more main storage.
Add more main storage.
No performance problems were found in pools data.
:T Pool fault rates exceeded guideline.
:T Pool fault rates approached guideline.
:T Pool fault rates below guideline.
:T Pool fault rate zero in all intervals.
:T Pool fault rates above guideline.
:T Pool fault rates approached guidelines.
:T Pool fault rate below guideline.
:T Pool fault rates above guideline.
:T Pool fault rates approached guidelines.
:T Pool fault rate below guideline.
:T Pool W->I ratio above guideline.
:T Pool W->I ratio approached guideline.
:T Pool fault rate 0.
:T Total system fault rate above &5 guideline.
:T Total system fault rate approached &5 guideline.
No excess storage available.
:T Pool A->I ratio exceeded guideline of &5.
:T Size of pools needs to be increased.
:T Size of pools needs to be decreased.
:T Thrashing may have occurred.
:T Thrashing may have occurred.
:T Increase pool size for listed pools.
:T Decrease pool size for listed pools.
:T Pools may possibly be removed.
:T Increase pool size for listed pools.
:T Decrease pool size for listed pools.
:T Pools may possibly be removed.
:T Pool W->I transitions are zero.
:T Pool thrashing may have occurred.
:T Pools have W->I transitions.
No performance problems found in system data file.
EAO exception rate exceeded guideline of &6.
Size exception rate exceeded guideline of &6.
Decimal data exception rate exceeded guideline of &6.
Verify exception rate exceeded guideline of &6.
Authority check rate exceeded guideline of &6.
No performance problems detected in jobs data.
:T High priority job CPU usage listed.
:T High disk usage jobs listed.
CPU utilization dominated by batch jobs.
High priority batch used &2% of cpu.
Disk use dominated by batch.
OfficeVision/400 routing job active.
Save/Restore active in &1 of &2 intervals.
CPU utilization exceeded guideline of &6%.
:T Activity level recommendations.
:T Time slice recommendations.
:T Increase time slice.
VLIC error logging active in &1 of &2 intervals.
:T Non-steady state tasks active.
Examine error logs for indications of problems.
System task CPU use high in &1 out of &2 intervals.
High MRT activity. &3 intervals selected.
User jobs were assigned to pool 2.
:T Separate batch from interactive jobs.
There were no jobs data to analyze.
Look for indications of error conditions.
Save/Restore active in &1 of &2 intervals.
Change job &1's priority to &2 from &3.
Change job &1's PURGE attribute to *YES. <delete this?>
Move job &1 to pool &2 or to a new pool. <Delete this?>
Change job &1's PURGE attribute to *NO. <Delete this?>
Reduce number of concurrent batch jobs.
If possible, run job &1 during period of low system activity.
Job &3/&2/&1 had a high "effective address overflows".
Job &3/&2/&1 had a high "binary data overflows".
Job &3/&2/&1 had a high "decimal data overflows".
Job &3/&2/&1 had a high "floating point overflows".
No performance problems found with DIOP(s).
:T DIOP utilization exceeded guideline of &3%.
:T DIOP utilization imbalance.
:T DIOP utilization exceeded guideline of &3%.
:T DIOP utilization imbalance.
No performance problems found with MIOP(s).
MIOP &1 utilization exceeded guideline of &3%.
MIOP utilization varied from &2% to &4%.
:T MIOP utilization above guideline of &3%.
:T MIOP utilization imbalance.
MIOP &1 utilization exceeded guideline of &3%.
MIOP use varied from &2% on MIOP &1 to &4% on MIOP &3.
:T MIOP utilization above guideline of &3%.
:T MIOP utilization imbalance.
No performance problems found with LIOP(s).
:T Average LIOP utilization exceeded guideline of &3%.
:T LIOP utilization imbalance.
:T LIOP utilization above guideline of &3%.
:T LIOP utilization imbalance.
IPCS Read Cache hits below guideline.
IPCS Write Cache hits below guideline.
IPCS CPU Utilization exceeded.
:T No performance problems found on listed PPP lines.
:T PPP had errors.
:T PPP utilization exceeded guideline of &3%.
:T PPP utilization exceeded guideline of &3%.
:T PPP had errors.
Interactive Feature Utilization may be excessive.
Interactive Feature Utilization may affect interactive and non interactive workload.
:T Highest Interactive Feature Utilization intervals listed.
:T Interactive Feature Utilization Threshold exceeded.
:T No performance problems found for TCP at system level.
:T TCP had datagram errors.
:T TCP had datagram errors.
:T TCP had segments retransmitted.
:T TCP had segments retransmitted.
:T TCP had Inbound packets in error.
:T TCP had Inbound packets in error.
:T TCP had Outbound packets in error.
:T TCP had Outbound packets in error.
:T No performance problems found for TCP at interface level.
No performance problems found with CIOP(s).
:T Average CIOP utilization exceeded guideline of &3%.
:T CIOP utilization imbalance.
:T CIOP utilization above guideline of &3%.
:T CIOP utilization imbalance.
:T Average CIOP utilization exceeded guideline of &3%.
:T CIOP utilization imbalance.
:T CIOP utilization above guideline of &3%.
:T CIOP utilization imbalance.
:T No performance problems on listed disk arms.
:T Disk arm %busy exceeded guideline of &4.
:T ASP space capacity approached guideline of &3%.
:T ASP space capacity exceeded guideline of &3%.
&1 Disk arms unused.
:T Disk seek lengths exceeded guideline of &3.
:T Disk buffer under runs exceeded guideline of &3%.
:T Disk I/Os per second exceeded guideline.
:T Disk average service time exceeded guideline.
:T ASP average arm %busy exceeded guideline of &3%.
:T ASP arm %busy imbalance.
:T ASP arm service time imbalance.
:T ASP nearly full. Overflow may have occurred.
:T Arm %busy exceeded guideline of &4%.
:T Disk service time exceeded guideline.
Total disk I/O was &1. (&2 Reads and &3 Writes)
:T Disk %busy exceeded guideline.
:T Disk seek length exceeded guideline.
:T Disk under runs exceeded guideline.
:T Disk I/Os exceeded guideline.
:T Disk service time exceeded guideline.
:T Disk seek length exceeded guideline of &3.
:T Percentage of Disk underruns exceeded guideline of &3%.
:T Disk I/Os per second exceeded guideline.
:T Percentage of Disk overruns exceeded guideline of &3%.
:T Disk over runs exceeded guideline of &3%.
:T Disk over runs exceeded guideline.
:T I/O weighted %busy exceeded guideline of &1.
:T Disk queue length exceeded guideline of &3.
:T Disk queue length exceeded guideline of &3.
:T Disk queue length guideline exceeded.
No trace data was available to process.
No performance problems found in trace data file.
:T High EAO Exception rate by job.
:T High binary overflow rate by job.
:T High DEC Exception rate by job.
:T High response time transactions.
:T High CPU transactions.
:T High Exceptional wait transactions.
:T High short wait and short wait extended times.
:T High seize wait and lock wait times.
:T High event wait times.
:T High 3270 emulation wait times.
:T High DDM wait times.
:T High MRT wait times.
:T Some intervals do not have trace data.
Average response time has exceeded &1 seconds.
:T No performance problems on listed IDLC lines.
:T IDLC receive utilization exceeded &2% guideline.
:T IDLC receive utilizations approached &2% guideline.
:T IDLC send utilization exceeded &2% guideline.
:T IDLC send utilizations approached &2% guideline.
:T IDLC CRC errors exceeded guideline of &2.
:T IDLC CRC errors exceeded guideline of &2.
:T IDLC short frame errors exceeded guideline of &2.
:T IDLC short frame errors exceeded guideline of &2.
:T IDLC aborts exceeded guideline of &2.
:T IDLC aborts exceeded guideline of &2.
:T IDLC retransmitted frames exceeded guideline of &2.
:T IDLC retransmitted frames exceeded guideline of &2.
:T IDLC sequence errors exceeded guideline of &2.
:T IDLC sequence errors exceeded guideline of &2.
Cannot print report because of missing data.
Cannot complete interval selection process.
Incorrect measurement interval specified.
Measurement interval specified is not valid.
Query definition too long.
The SLTJOB and OMTJOB parameters are mutually exclusive.
SLTUSRID and OMTUSRID parameters cannot both be specified.
SLTPOOLS and OMTPOOLS parameters cannot both be specified.
SLTSBS and OMTSBS parameters cannot both be specified.
SLTLINE and OMTLINE parameters cannot both be specified.
SLTCTL and OMTCTL parameters cannot both be specified.
SLTFCNARA and OMTFCNARA parameters cannot both be specified.
SLTLOC and OMTLOC parameters cannot both be specified.
Functional area &1 does not exist.
SLTJOBTYPE and OMTJOBTYPE parameters cannot both be specified.
SLTRUNPTY and OMTRUNPTY parameters cannot both be specified.
Only one parameter can be specified per request.
Member &1 not found in library &2.
Library &1 does not exist.
Performance data files for this report do not exist.
Performance data member &1 has been processed.
Library QTEMP not valid for batch job.
Transaction report partially printed because CPU model information not found.
Performance collection contains inconsistent collection intervals.
No option selected or function key pressed.
Subfile full, no more records can be displayed.
Fields in error are highlighted.
One or more configuration files were deleted.
Model &1 is not a valid model.
Cannot access data to analyze data base file.
Sampled address monitor already started.
Limit of 16 windows exceeded.
Procedure name is not allowed for &3 program &1/&2.
Procedure not found in &3 program &1/&2 module &5.
&7 windows defined for &3 program &1/&2 with pane size &6.
Cannot sample &3 program &1/&2.
Exception detected by vertical licensed internal code.
Procedure name is required when module name is specified.
A program must be specified.
Sampled address monitor not started.
Sampled address monitor data collection already started.
Sampled address monitor data collection not yet started.
Sampled address monitor not yet started.
Sampled address monitor data collection currently active.
Performance data file(s) are not upward compatible.
Performance data file(s) are not downward compatible.
Cannot access resource management trace data.
Cannot access processed seize or lock conflict data.
&1 seize and lock conflicts found.
No seize or lock conflicts found.
Cannot access trace data.
Performance data member &2 does not exist.
Data missing from performance member &3. (I C)
Cannot copy performance data member &2.
Library &1 does not contain performance data.
Processing performance data. Please wait.
Cannot show performance data.
Select only one member.
Cannot show performance data.
Cannot show performance data.
Cannot access performance data member.
&1 item was not copied. It was in use.
* Disk compression is active for the disk unit.
No data in member to print.
Qualified job name required when thread value specified.
NBRITV parameter can only be specified with OUTPUT(*FILE).
MBR parameter cannot be specified with OUTPUT(*).
LIB parameter cannot be specified with OUTPUT(*).
Cannot print activity report.
Work with System Activity already active by user &4.
Refresh seconds not within valid range.
Work with job option not valid for tasks.
Too many entries selected for monitoring.
No performance data to display
Interval data cannot be displayed for IDLC lines.
+ Multipath disk unit.
Error in Performance Tools license management program.
Performance Tools license information not retrieved.
Manager or Agent Features are not properly installed.
This field contains an invalid value.
DATATYPE(*IOP) must be specified to use IOP variable.
DATATYPE(*DISK) must be specified to use a disk variable.
An IOP variable must be specified for YAXIS.
Disk variable must be specified for YAXIS.
YAXIS(*TIME) must be specified.
*TIME must be specified for XAXIS.
*TIME must be specified for XAXIS.
Graph format &2 already exists in library &1.
Graph format &2 not found in library &1.
No functional area &2 exists.
Graph package &2 already exists in library &1.
Graph package &2 not found in library &1.
Graph format &2 cannot be added.
Graph axis range specified not correct.
Priority boundaries specified not correct.
Value for FCNARA parameter must be specified.
Value for JOBTYPE parameter must be specified.
Value for PRIORITY parameter must be specified.
Value for IOP parameter must be specified.
Value for DISK parameter must be specified.
Both axis variables cannot be the same.
No graph formats in library
No graph formats or packages in library
Select only one format or package for this option.
Specify only one option.
&1 cannot be changed or deleted.
Option chosen for graph format &1 not valid.
Option chosen for graph package &1 not valid.
Select only one graph format.
Package &1 contains format &2.
Cannot use member &3 in performance graph.
Too many formats selected.
Too many items selected to be deleted.
Field value is not valid.
Field value is not valid.
Field value is not valid.
A name for the graph format or package must be entered.
Cannot delete historical data from member &2.
Historical data cannot be created for member &2.
Specify *AUTO for range with *TIME for variable.
Field value is not valid.
SLTUSER and OMTUSER parameters cannot both be specified.
&1 does not exist in library &2.
Graph format selected for historical graph not valid.
*OUTFILE not valid for graph package.
Jobs defined in more than one functional area.
Job defined in 2 functional areas.
Cannot display graph because of missing data.
Graph format &1 in library &3 does not exist.
Field value is not valid.
Field value is not valid.
&1 deleted from &2.
Historical data does not exist for member &2.
Graph format &1 does not exist in TOPKG library.
Cannot copy graph package.
Cannot copy graph format or package.
No historical data in library
&1 item was not deleted. It was in use.
Name for output file must be specified.
Name for the output queue library must be specified.
Cannot create historical data.
Value for TOFCNARA parameter must be specified.
Cannot create functional area &2.
Cannot change functional area &2.
Cannot copy functional area &2.
Cannot copy to functional area &2.
Cannot delete functional area &2.
Value for OUTFILE parameter must be specified.
*NONE value must be specified for JOBD parameter.
Cannot create historical data.
X-axis variable for both graphs must be the same.
Cannot use member &3 in historical graph.
Cannot use member &2 in historical graph.
Too many members selected.
Plotter not found.
Plotter type not supported.
Graph format has too many legend entries for overlay.
Cannot display graph because of missing data.
Cannot write graph to output file.
Specify *AUTO for range with *TIME for X-axis.
Functional area name not valid.
Printer &1 not found.
Graph format selected for historical graph not valid.
Graph format &2 in library &1 created.
Graph format &2 in library &1 changed.
Graph package &2 in library &1 created.
Graph package &2 in library &1 changed.
Cannot display graph because of missing data.
Field value is not valid.
DATATYPE(*CMNLINE) must be specified to use a communications line variable.
Communications line variable must be specified for YAXIS.
Value for CMNLINE parameter must be specified.
Graph format &3 already exists in library &2.
Graph format &3 not found in library &2.
&2 cannot be changed or deleted.
Historical Data File QAPGHSTD not found in Library &1.
Cannot copy graph format &1 onto itself.
Cannot copy graph package &1 onto itself.
Cannot copy functional area &1 onto itself.
Loading graph. Please wait.
Graph has too many data points to display.
Name for output file member must be specified.
Record length for GDF file &2 not correct.
Graph saved into member &3 of GDF file &2 in library &1.
Too many data lines specified for scatter graph.
Graph format &1 is not valid.
Functional area &2 in library &1 created.
Functional area &2 in library &1 changed.
Functional area &2 deleted from library &1.
A name for the functional area must be entered.
No functional areas in library
Cannot display graph because of missing data.
No historical data to graph.
Graph may be inaccurate.
*LGLDBIO only valid when *JOBTYPE specified for DATATYPE parameter
*DDM must be specified for Job type parameter.
Library QTEMP not valid for batch job.
Unexpected message monitored.
Cannot create historical data.
Library &2 not found.
Performance report partially printed due to missing data.
Performance report partially printed due to errors.
Performance Tools for iSeries - Base
Performance Tools - Manager Feature
Performance Tools - Agent Feature
&1 &4 &3 &5
&1
&1 &4 &3 &5
&1 &5 &4
&1 &4 &5 &3
&1 &4 &3 &5
&1 &3
&4 &3
&1 &3 &2
&1 &2 &3 &4 &5
&1 &2 &4 &6
&1 &2 &3 &4
&1 &5 &2 &4
&1 &2 &3 &4 &5
&1 &3
&1 &2
&1 &2
&1 &2
&1 &2 &3
&6-&1 &2 &3 &4 &5
&6-&1 &2 &3 &4 &5
&1 &3 &2
&1 &2 &3
&1 &2 &3 &4
&1 &2
&1 &2 &4
&1 &2 &4
&1 &2 &3 &4
&5 &6
&1 &4 &2 &3 &5
&2 &5 &6 &7 &4
&2 &4 &5
&1 &6 &2 &4 &7
&5 &2 &4 &3 &6
&1 &4 &3
&1 &2 &4 &3
&1 &2 &4 &3
&1 &2 &6 &7 &5
&1
&1 &3 &4
&1 &4 &3 &5
&6 &5 &1 &4
&1 &2
&1 &7 &4 &3 &5
&1 &6 &3 &4
&1 &2 &3
&1 &2 &3
&1 &2 &3 &4 &5
&1
&1 &2 &3 &4 &5 &6
&1 &2 &5 &4 &6
&1 &2 &4 &5
&1 &2
&1 &2 &4
&1 &3 &4 &5
&1 &2 &4 &5
&1 &3 &4 &5
&1
&1 &3 &4 &5
Print Transaction Report
IP Address
ERROR condition signalled at &4 in &3. ONCODE &1.
STORAGE condition raised at &4 in &3. ONCODE &1.
CONVERSION condition raised at &4 in &3. ONCODE &1. statement.
CONVERSION condition raised at &4 in &3. ONCODE &1.
CONVERSION condition raised at &4 in &3. ONCODE &1.
CONVERSION error at &4 in &3. ONCODE &1.
FIXEDOVERFLOW at statement &4 in &3. ONCODE &1.
OVERFLOW error at &4 in &3. ONCODE &1.
ERROR condition at &4 in &3. ONCODE &1.
STRINGSIZE at &4 in &3. ONCODE &1.
UNDERFLOW condition raised at &4 in &3. ONCODE &1.
ZERODIVIDE error at &4 in &3. ONCODE &1.
ERROR condition at &4 in &3. ONCODE &1.
ERROR condition at &4 in &3. ONCODE &1.
ERROR condition at &4 in &3. ONCODE &1.
ERROR condition at &4 in &3. ONCODE &1.
ERROR condition at &4 in &3. ONCODE &1.
ERROR condition at &4 in &3. ONCODE &1.
ERROR condition at &4 in &3. ONCODE &1.
ERROR condition at &4 in &3. ONCODE &1.
ERROR condition at &4 in &3. ONCODE &1.
ERROR condition at &4 in &3. ONCODE &1.
ERROR condition at &4 in &3. ONCODE &1.
ERROR condition at &4 in &3. ONCODE &1.
ERROR condition at &4 in &3. ONCODE &1.
ERROR condition at &4 in label variable. ONCODE &1.
ERROR condition at &4 in &3. ONCODE &1.
ERROR condition at &4 in &3. ONCODE &1.
ERROR condition at &4 in &3. ONCODE &1.
Conflicting attribute for variable &6 in &7.
ENDFILE signal at &4 in &3. ONCODE &1.
ENDFILE raised at statement &4 in &3. ONCODE &1.
ENDPAGE signal at &4 in &3. ONCODE &1.
ENDPAGE raised at &4 in &3. ONCODE &1.
KEY signalled at &4 in &3. ONCODE &1.
KEY raised at &4 in &3. ONCODE &1.
KEY raised at &4 in &3. ONCODE &1.
KEY raised at &4 in &3. ONCODE &1.
KEY raised at &4 in &3. ONCODE &1.
KEY raised at &4 in &3. ONCODE &1.
KEY raised at &4 in &3. ONCODE &1.
KEY raised at &4 in &3. ONCODE &1.
RECORD raised at &4 in &3. ONCODE &1.
RECORD raised at &4 in &3. ONCODE &1.
RECORD raised at &4 in &3. ONCODE &1.
TRANSMIT signal at &4 in &3. ONCODE &1.
TRANSMIT raised at &4 in &3. ONCODE &1.
TRANSMIT raised at &4 in &3. ONCODE &1.
TRANSMIT raised at &4 in &3. ONCODE &1.
TRANSMIT raised at &4 in &3. ONCODE &1.
TRANSMIT raised at &4 in &3. ONCODE &1.
UNDEFINEDFILE signal at &4 in &3. ONCODE &1.
UNDEFINEDFILE at &4 in &3. ONCODE &1.
UNDEFINEDFILE at &4 in &3. ONCODE &1.
UNDEFINEDFILE at &4 in &3. ONCODE &1.
UNDEFINEDFILE at &4 in &3. ONCODE &1.
UNDEFINEDFILE at &4 in &3. ONCODE &1.
UNDEFINEDFILE at &4 in &3. ONCODE &1.
UNDEFINEDFILE at &4 in &3. ONCODE &1.
UNDEFINEDFILE at &4 in &3. ONCODE &1.
UNDEFINEDFILE at &4 in &3. ONCODE &1.
Program name specified for QPEICALL is blank.
Call to program &1 in library &2 was unsuccessful.
Program &1 in library &2 is not a PL/I program.
Run-unit ended at &2 in &3.
Internal failure in a run-time routine.
Function check in QPESERR, Error Handler module.
No error on-unit in &1. Select dump option C, D, or F.
Error on-unit in &1. Select dump option C, D, or F.
IBM System /36-Sitzung starten
Menü
Aktuelle Bibliothek
Prozedur oder Programm
IBM System /36-Sitzung beenden
Menü aus Nachr.-Dateien erst.
Menü## Befehlsnachrichtendatei
Auswahltextnachrichtendatei
Menü ersetzen
Menü in freiem Format
DDS-Liste
Höchstzahl von Einheiten
Berechtigung
In DDS-Quellendatei
In DDS-Quellenteildatei
Benutzerdefinierte DBCS-Daten
Bibliothek
IBM System /36-Menü erstellen
Befehlstextquelleneintragung##
Auswahltextquelleneintragung
Befehlstextquellendatei
Auswahltextquellendatei
Menübibliothek (LOADLIB)
Auswahltextnachr.-Datei bleibt
Nachrichtendatei erstellen
Nachrichtenquelleneintragung
IBM System /36-Quellendatei
Bibl. mit Nachrichtendatei
Nachrichtendatei ersetzen
Präfix für Nachrichten-ID
Auswahl
#-Ersatzfelder erlauben
S/36-Einschränkungen aktivier.
In CL-Quellendatei
In CL-Quellenteildatei
Bei Fehler Nachricht ausgeben
S/36-Bildschirmdatei erstellen
Bildschirmdatei
Auswahl
S/36-SFGR-Quelleneintragung
Bildschirmdatei ersetzen
Umwandlungsliste drucken
Generierungsauswahl
Syntax der SFGR-Quelle prüfen
Name (## erforderlich)
S/36-Konfiguration anzeigen
S/36-Konfiguration ändern
S/36-Prozedur starten
Prozedur
Name (MenüDT), *NONE
Prozedurparameter
S/36-Nachrichtenliste ändern
Nachrichtenliste
Nachrichtenliste
Maßnahme
Name oder Auswahl für *HALT
Standardmaßnahme
Gültigkeitsbereich
Menü erzwingen
S/36-Umgebungsattribute ändern
S/36-Umgebungsattribute abruf.
Standardsitzungsbibliothek
Standarddateibibliothek
Bib.liste f. Dateien verwenden
Gleiche Dat. mit versch. Datum
S/36-Dateien gemeins. benutzen
Satzblockung b. gemeins. Datei
Gelösch. Dat. in Cache speich.
Stand.wert f. Zeilen pro Seite
Formularart
Standardmaßnahme bei Nachricht
Haltangaben
Initialisierung von EVOKE-Jobs
Speicherpool der EVOKE-Jobs
Priorität der EVOKE-Jobs
Satzlänge der Quellendatei
MAP-Benutzerprofil
Berechtigung f. Dateien prüfen
MAP-Verzögerungswert
Initialisierung von MAP-Jobs
Speicherpool der MAP-Jobs
Prioriät der MAP-Jobs
Umgebungsname
CL-Variable für SLIB (8)
CL-Variable für FLIB (10)
CL-Variable für LIBL (4)
CL-Variable für DATDIFF (4)
CL-Variable für S36ESHARE (4)
CL-Variable für RCDBLK (4)
CL-Variable für CACHEDLTF (4)
CL-Variable für LPPAGE (3)
CL-Variable für FORMTYPE (4)
CL-Variable für DFTMSGACN (9)
CL-Variable für HALTOPT (4)
CL-Variable für EVKJOBINIT (6)
CL-Variable für EVKJOBPOL (8)
CL-Variable für EVKJOBPTY (10)
CL-Variable für SRCRCDLEN (3)

Length: 252101 Date: 20220704 Time: 013913

Count: 1401     sap01-206 ( 1942 ms ) Diese Dokumentation steht unter dem Copyright der IBM.