Ansicht
Dokumentation

CPA581B - Controller &24 contact not successful. Logical channel reset or cleared. (C G R) ( OS/400 )

CPA581B - Controller &24 contact not successful. Logical channel reset or cleared. (C G R) ( OS/400 )

ABAP Short Reference   CL_GUI_FRONTEND_SERVICES - Frontend Services  
This documentation is copyright by IBM.
SAP E-Book


Message : CPA581B
Controller &24 contact not successful. Logical channel reset or cleared. (C G R)

Message Long Text :

Cause . . . . . : The logical channel in use by the specified controller description was reset or cleared either locally or remotely. The probable causes are:
-- A remote system problem.
-- A configuration mismatch between the local and remote systems.
-- An X.25 network problem.
-- Communication ended normally by remote system.
The X.25 cause and diagnostic codes may help identify the exact failure cause.
Recovery . . . :
Verify that the remote system and X.25 network are functioning properly, and the local system configurations are correct.
The X.25 cause code is: &41 (&43). The X.25 diagnostic code is: &42 (&44).
For more information on X.25 cause codes and diagnostic codes, see the X.25 Network Support book, SC41-5405.
If the problem continues, report the problem (ANZPRB command).
Possible choices for replying to message . . . . . . . . . . . . . . . :
C -- Cancel recovery and inform any applications that are waiting for an operation that the recovery has been canceled.
G -- Start the automatic communications recovery again as defined by the communications recovery limit (CMNRCYLMT) configured for line &23.
R -- Try the operation one more time.
Technical description . . . . . . . . : The error log identifier is &22.
The error code is &40. The error codes and their meanings follow:
46003130 -- RESET indication received.

Message File : QCPFMSG
Library Message File : QSYS2924


PERFORM Short Reference   General Material Data  
This documentation is copyright by IBM.

Length: 3294 Date: 20240328 Time: 234659     sap01-206 ( 3 ms )