Ansicht
Dokumentation

CPA58B8 - Call on line &23 failed. Dial tone error. (C N R) ( OS/400 )

Fill RESBD Structure from EBP Component Structure   BAL_S_LOG - Application Log: Log header data  
This documentation is copyright by IBM.


Message : CPA58B8
Call on line &23 failed. Dial tone error. (C N R)

Message Long Text :

Cause . . . . . : The modem did not detect a dial tone when expected, or it detected a dial tone when another tone was expected. The modem may return this error for the following reasons:
The local telephone line is disconnected or not operable.
Tone dial was used on a pulse dial line.
There is a local modem cable problem.
There is a problem with the modem.
A switched network problem exists.
The connection number (CNNNBR parameter) in the line description may not contain the correct dialing codes for your modem.
Recovery . . . : Correct the problem described previously.
Possible choices for replying to message . . . . . . . . . . . . . . . :
C -- Cancel the dial attempt to the X.25 network and all logical calls waiting for the connection. Any applications and subsystems that are waiting for an operation will be informed that the logical call has been canceled.
N -- Cancel the dial operation to the X.25 network using line &23 and attempt to complete the pending logical calls. Depending on values specified for the switched line list (SWTLINLST) and the switched line selection (SWTLINSLCT) parameters configured in each controller description, the system may choose a different line description to complete the call.
R -- Try the operation one more time when line &23 is available.
Technical description . . . . . . . . : The error log identifier is &22.
The error code is &40: V.25bis call failure, dial tone error.
The call failure indication (CFI) received from the modem was &46. The modem did not detect a dial tone when expected, or it detected a dial tone when another tone was expected.
The modem sends this CFI if the modem abort timer expires and at least one of the following occurs:
A dial tone was detected when there should not have been a dial tone.
A busy signal was not detected.
An answer tone was not detected.
A ring back signal was not detected.
This situation could indicate a local modem cable problem, a modem problem, or a network problem.

Message File : QCPFMSG
Library Message File : QSYS2924


ABAP Short Reference   General Data in Customer Master  
This documentation is copyright by IBM.

Length: 3271 Date: 20240416 Time: 162330     sap01-206 ( 2 ms )