Messages

Complete Message Docu Documentation From ACO303 up to AP_COPY022

This documentation is copyright by SAP AG.
Count: 4303 Skipped: 5
Message Docu
Description
Substitutes for '&1' are being changed by &2 ( ACO 400 )
Substitutes for '&1' have already been changed by another user ( ACO 401 )
Cost/revenue rate &1 of role is invalid ( ACO_BSP 018 )
Selection for assignments between roles and tasks is invalid ( ACO_BSP 021 )
& &: Depreciation key assignment: unit-of-prod. dep. with dep. to the day ( ACRSL 001 )
This combination of depreciation method and changeover method not allowed ( ACRSL 002 )
&: Multipl. factor only allowed w/ dep calc.method D and P in base method ( ACRSL 004 )
& : Base value "acquisition" is not allowed ( ACRSL 006 )
& : There is a depreciation key, but system does not change over to it ( ACRSL 009 )
& : There is no depreciation method to which the system can change over ( ACRSL 010 )
Incorrect indicators in base method &1 (type &2) ( ACRSL 011 )
& : No changeover percentage rate ( ACRSL 012 )
No longer possible to change 'depreciation to the day' indicator ( ACRSL 014 )
&3: Percentage rate required for depreciation calculation method &1 ( ACRSL 015 )
& : Dep. after planned life end incompatible with dep. over rem. life ( ACRSL 016 )
Base method &: set 'depreciation after end of planned life' indicator ( ACRSL 017 )
& : Check the treatment after the end of useful life ( ACRSL 018 )
& : Validity in periods has to be between 0 and 12 ( ACRSL 019 )
& : Enter acquisition year ( ACRSL 021 )
& : Enter duration of validity ( ACRSL 022 )
& : Differing period controls in one depreciation key ( ACRSL 023 )
Method &1 already exists in chart of deprec. &2 with different contents ( ACRSL 024 )
& : Choose 'Acq.only allowed in capitalization year' ( ACRSL 029 )
& : Depreciation key is defined with different dep. type ( ACRSL 034 )
Error during migration of data in table &1 ( ACRSL 035 )
Method &1 does not contain any levels ( ACRSL 038 )
&1: Depreciation key does not contain a multi-level method ( ACRSL 039 )
Method &1 cannot be deleted, since it is still being used ( ACRSL 040 )
Depreciation key &1 cannot be deleted ( ACRSL 041 )
Depreciation key &1 cannot be deleted ( ACRSL 042 )
Key &1 is also deleted in downstream systems ( ACRSL 043 )
Depreciation key &1 in chart of depreciation &2 is not active ( ACRSL 045 )
Source and target chart of depreciation have to be different ( ACRSL 046 )
&: Total percentage rate deprec. not allowed with shutdown indicator ( ACRSL 047 )
&: Total percentage rate deprec. not allowed with multiple-shift ( ACRSL 048 )
&: Total percentage rate deprec. not allowed with deprec. to day ( ACRSL 049 )
&: Leasing dep. calculation method not allowed with deprec. to the day ( ACRSL 051 )
Depreciation key &1 cannot be deleted ( ACRSL 053 )
Document &1/&2/&3 is referred but was never previously reported. ( ACR_ES_ECSL 003 )
Check the currencies of Documents &1 and &2. ( ACR_KR_VAT 011 )
Check the loading dates of Documents &1 and &2. ( ACR_KR_VAT 012 )
GUI numbers are duplicate in Line &1 and Line &2. ( ACR_TW_VAT 010 )
Payment block &1 cannot be used for SAP Fraud Management ( ACSS4_PAYMENTRUN 001 )
Functional area &1 is different to &2 ( AC_FAREA_FROM_COBL 010 )
Select one of the indicators "Entry Screen" or "Save" ( AC_FAREA_FROM_COBL 012 )
& (Lower limit of range is blank) ( AD 007 )
Values for domain & were deleted ( AD 008 )
Condition &1 cannot be used as a cost condition ( AD01 001 )
No cost condition could be determined for sales document type & ( AD01 002 )
Condition &1 does not exist in the system ( AD01 003 )
Error when calling up profile check function &1 ( AD01 090 )
No check functions are stored in the table ( AD01 092 )
Value range for domain & is defined by a value table ( AD 011 )
Specify a calculation procedure ( AD01 114 )
Set &1 for field &2 is not defined ( AD01 119 )
If you want to create a set, first enter the name of the set ( AD01 121 )
Error when structuring dynamic items for item &/& ( AD01 124 )
Error while structuring dynamic items for project &, element & ( AD01 125 )
Error during material determination for project &, billing element & ( AD01 154 )
Error during material determination for sales document item &/& ( AD01 155 )
Error during material determination for service order & ( AD01 156 )
Error during structuring of dynamic items for service order & ( AD01 158 )
Error during material determination for sales doc. item &1, source &2&3&4 ( AD01 160 )
There are no sales order or contract items for WBS element & ( AD01 175 )
There is more than one sales order or contract item for WBS element & ( AD01 176 )
For order & there is no sales order item or contract item ( AD01 177 )
Resource-related billing/quotation not possible for sales document &/& ( AD01 194 )
Resource-related billing/quotation not possible for service order & ( AD01 196 )
Set & is empty ( AD01 211 )
Sales document & could not be converted ( AD01 224 )
Service order & could not be converted ( AD01 225 )
Process either service order or sales document ( AD01 241 )
Enter an object ( AD01 242 )
Sales document &: No items found ( AD01 243 )
No profile found in sales document &1 &2 ( AD01 245 )
No DIP profile assigned to project definition &1 ( AD01 246 )
Proile &1 for usage &2 not found ( AD01 247 )
A quotation cannot be created for order &1 ( AD01 249 )
Incomplete input data ( AD01 251 )
Billing/quotation creation not allowed for item &1 &2 ( AD01 252 )
Profile entry not possible ( AD01 254 )
Results analysis not possible with billing form &1 ( AD01 255 )
Results analysis not possible with source &1 ( AD01 256 )
No product processing can take place ( AD01 257 )
No DIP profile found in service order & ( AD01 258 )
Sales document &: Items assigned to different profiles ( AD01 259 )
Quotation creation only possible for revenue-bearing service orders ( AD01 260 )
Only one sales document can be processed at a time ( AD01 272 )
Expenditures without material assignment are automatically deleted ( AD01 311 )
Double accrual of resource item is not possible ( AD01 312 )
& & (Value deviates from data type & or is not allowed) ( AD 015 )
Billing form 'flat-rate' cannot be used for contracts ( AD01 505 )
Sales document type &1 does not belong to sales doc. category 'Quotation' ( AD01 506 )
& & (Enter a value length shorter than the domain length &) ( AD 016 )
& & is locked by another transaction ( AD 021 )
Enter a valid command ( AD 022 )
Activate is currently locked by user & ( AD 024 )
System error in lock management ( AD 025 )
& is not valid; check and correct it ( AD 026 )
Domain & is not active (check name) ( AD 028 )
Foreign key maintenance not possible for this field ( AD 029 )
& is not active ( AD 030 )
Report database error (DDERR & &) to the system administrator ( AD 031 )
& & does not exist ( AD 039 )
& is reserved for & ( AD 040 )
& is non-standard and must be corrected ( AD 042 )
Data element & is not active ( AD 044 )
Table & is not active (check name) ( AD 045 )
Data element does not exist ( AD 046 )
Data element is not active (check name) ( AD 048 )
&-& (Specify a valid reference table) ( AD 052 )
Field & is used as a reference field and cannot be deleted ( AD 053 )
Table & has more than & key fields ( AD 054 )
&-& (Specify a reference field) ( AD 057 )
Reference field &-& not in format & ( AD 058 )
Format CURR/QUAN requires you to specify a reference field ( AD 059 )
& (Output length shorter than calculated (&) ) ( AD 061 )
Output length shorter than data length ( AD 063 )
& (Number of spaces adapted to number of decimal places) ( AD 064 )
Output length for data type & is set to & ( AD 066 )
Object & is new and being processed by & ( AD 069 )
Data element & is not in ABAP Dictionary ( AD 071 )
You cannot change active fields in this mode ( AD 076 )
& is new and reserved for & ( AD 082 )
Enter an object name for navigation ( AD 084 )
Table is locked (see restart log) ( AD 089 )
First 7 characters of name & are identical to the view table name ( AD 091 )
First 7 characters of name & are identical to the pool/cluster ( AD 092 )
First 7 characters of name & are identical to the MC table ( AD 093 )
An underscore is not permitted in position 2 or 3 ( AD 094 )
Table name must be at least 4 characters long ( AD 099 )
First 7 characters of name & are identical to a table ( AD 101 )
Select a shorter name for & ( AD 102 )
The name & does not start with a letter ( AD 103 )
The name & contains a blank; enter it again without blanks ( AD 104 )
The name & contains a non-alphanumeric character ( AD 105 )
No fields exist for table & ( AD 107 )
Field & in table & is specified twice. Please check. ( AD 109 )
Field & (Data type & is not supported in domain &) ( AD 110 )
&-& (Check table & does not exist) ( AD 111 )
Field & (Value & is not permitted) ( AD 115 )
& is a reserved word; choose another word ( AD 116 )
Data element & does not exist ( AD 120 )
Data element & (domain & does not exist) ( AD 121 )
Object & does not exist ( AD 123 )
Enter & ( AD 129 )
Table & is value table in domain & ( AD 145 )
Table & is check table in &-& ( AD 146 )
Table & is reference table in &-& ( AD 147 )
Table & still contains pooled/cluster tables (&) ( AD 148 )
Field name is missing ( AD 172 )
No fields exist for table &. Saving not possible ( AD 176 )
Transfer parameters are inconsistent. Field maintenance is not possible ( AD 179 )
Transfer parameters are missing. Field maintenance is not possible ( AD 180 )
Specify a valid table type ( AD 182 )
Key to table & is too long ( AD 186 )
Technical settings for table & have been deleted ( AD 188 )
In generic buffering you cannot select a number of key fields ( AD 192 )
Data class & only becomes relevant when type changed from & to TRANSP ( AD 193 )
Minimum DB extent cannot be greater than maximum DB extent ( AD 194 )
& is not a database view ( AD 198 )
Incorrect call of routine ACTDD09L ( AD 199 )
& is not a table of type POOL,CLUSTER,TRANSP ( AD 206 )
You may not define more than two key fields ( AD 210 )
Choose name VARKEY for second key field ( AD 213 )
Model program & does not exist ( AD 214 )
Table & is used in & as an INCLUDE table ( AD 219 )
INCLUDE table & is not active ( AD 222 )
Table is not active. (Check name) ( AD 223 )
INCLUDE table used twice in the same INCLUDE chain ( AD 224 )
INCLUDE cannot be broken down; field name with suffix is too long ( AD 225 )
Too many nested INCLUDEs ( AD 226 )
Structure for sales item &1/&2 couldn't be determined ( AD23 004 )
More than 15 hierarchy levels. Output not possible for profile &1 ( AD23 005 )
Object hierarchy couldn't be determined for sales item &1/&2 ( AD23 007 )
Document &1 of type &2 cannot be printed using dynamic item processor ( AD23 010 )
Object hierarchy couldn't be determined for order &1 ( AD23 011 )
Structure for order &1 couldn't be determined ( AD23 012 )
Tables of type VIEW are not permitted as INCLUDEs ( AD 236 )
Only structures can be included in database tables ( AD 237 )
Unable to delete object & (&) because it is still in use ( AD 239 )
Specify a valid pool/cluster name ( AD 240 )
Specify an active pool/cluster ( AD 241 )
Entry of pool/cluster name not required ( AD 242 )
Table & is not active or does not exist ( AD 244 )
There are no active parameters for table & ( AD 249 )
Domain & is used in data element & ( AD 255 )
KeyFieldDisp. = 0; change keyFieldDisp only if generic buffering selected ( AD 256 )
Gen. buffering not allowed. Table & contains only one key field ( AD 257 )
Not saved. Generic buffering requires a key field number ( AD 258 )
This number of key fields is not permitted with generic buffering ( AD 259 )
Foreign key &-& (dependency factor TEXT is incorrect) ( AD 261 )
Data element & is still being used (see "Where-used list") ( AD 265 )
&-& (text foreign key requires additional language field) ( AD 267 )
&-& (text foreign key with fields outside of key) ( AD 268 )
Foreign key &-& (dependency factor ID incorrect) ( AD 269 )
Check table cannot be deleted ( AD 271 )
Foreign key &-& does not originate from foreign key table & ( AD 273 )
Foreign key &-& (& and & point to different domains) ( AD 274 )
Foreign key &-& (dependency factor & is incorrect here) ( AD 275 )
For. &-& (check table & is not transitive with respect to value table &) ( AD 280 )
Foreign key maintenance is not possible for this field ( AD 281 )
&-&: Foreign key cannot be specified in full ( AD 284 )
Check table & does not exist or has no key fields ( AD 285 )
Check table & is also foreign key table ( AD 286 )
Foreign key &-& (foreign key not defined) ( AD 288 )
&-& (foreign key definition cannot be specified in full) ( AD 290 )
Foreign key &-& (foreign key field & & does not exist) ( AD 291 )
Foreign key &-& (foreign key was deleted) ( AD 294 )
Foreign key &-& (rel. cat. DYNP -> CARD superfluous) ( AD 297 )
Foreign key &-& (relationship cat. CLAS/SPEC --> cardinality 'C') ( AD 299 )
Primary key change not permitted for value table & ( AD 300 )
Foreign key &-& (relationship 'CLAS' --> classified field/value) ( AD 301 )
Foreign key &-& (no classified field/value specified with &) ( AD 302 )
Foreign key &-& (enter valid cardinality) ( AD 303 )
&-& (foreign key field & does not exist) ( AD 304 )
Field type &-& must be CHAR or NUMC ( AD 305 )
Value table & does not contain any key fields ( AD 308 )
Table & (no key field points to domain &) ( AD 309 )
&-& (foreign key definition is partial) ( AD 312 )
Enter a valid application class ( AD 317 )
&: Key length greater than maximum key length (&) ( AD 320 )
& (specify a primary key) ( AD 321 )
& (data length used > max. data length in pool (&) ) ( AD 322 )
& (key fields are not at the beginning of the table) ( AD 323 )
Table & is check table in domain & ( AD 325 )
Pool definition & (max. key length & exceeded) ( AD 327 )
Pool definition & (max. data length & exceeded) ( AD 328 )
Table & is not a pool ( AD 329 )
Table & is not a cluster ( AD 334 )
Field & (data type or data length incorrect) ( AD 335 )
Use another data type in the pool key ( AD 338 )
Field definitions for table & changed, data exists (F1) ( AD 340 )
Key to table & changed, data exists (F1) ( AD 341 )
Table & is not defined in ABAP Dictionary ( AD 342 )
Create a database table for table & ( AD 344 )
Table & is locked by user & ( AD 349 )
Nametab generated; adjust the C structures ( AD 355 )
Specify a parameter ID from table TPARA ( AD 357 )
First generate nametab using C program ( AD 358 )
Table & (generation type 1, nametab was written) ( AD 359 )
Inconsistencies between nametab and field catalog ( AD 361 )
Table type change. Convert data ( AD 362 )
Create a database table ( AD 363 )
Table type change. Convert data ( AD 364 )
Fields inserted/deleted. Convert DB table/data ( AD 365 )
Field definitions changed; update them now ( AD 366 )
Key changed (update the DB table/data) ( AD 367 )
Fields added. Convert DB table/data ( AD 368 )
Field definitions were changed completely. Data will be lost ( AD 369 )
Active nametab is missing. Nametab was re-written ( AD 370 )
Table type change. Create database table ( AD 371 )
Table type change. Delete database table ( AD 372 )
Fields deleted; update the DB table/data ( AD 373 )
Create a database table ( AD 374 )
Table type changed (delete the table dynpro) ( AD 375 )
Table type changed; data may have been invalidated ( AD 376 )
Key format changed; update the data ( AD 377 )
Fields can only be added with permission from your head of development ( AD 378 )
Key fields were changed/renamed; update the DB table/data ( AD 379 )
Table key structure changed; update the database table/data ( AD 380 )
Table type change. Create database table ( AD 381 )
Fields deleted; adjust the table dynpro ( AD 383 )
Pool/cluster name changed. Convert data ( AD 384 )
Table type change. Convert data ( AD 385 )
Table type change; check whether data updates are required ( AD 386 )
Create a database table ( AD 387 )
INCLUDE not allowed for tables of type VIEW ( AD 388 )
Fields were added; modify the table dynpro ( AD 389 )
Activation of table & forced (E- & ), &, & ( AD 390 )
Output length for data type & is set to at least & ( AD 391 )
Table & of generation type 1 (nametab was not rewritten) ( AD 392 )
Fields were added; update the DB table ( AD 393 )
Entry already exists in TACOB ( AD 394 )
Entry in TACOB performed, activation takes place in background ( AD 395 )
Entries for data type & have been fixed and will be corrected ( AD 400 )
& (format & is not supported) ( AD 402 )
Upper limit is lower than lower limit ( AD 403 )
Value range is only permitted for formats CHAR, NUMC, DEC, INT* ( AD 405 )
& (length & is not within limits (&,&)) ( AD 406 )
& (calculated output length & is less than specified &) ( AD 408 )
& (length> & for & is only allowed in structures) ( AD 409 )
Field length & is too big; enter a length between & and & bytes ( AD 410 )
Background job already exists ( AD 415 )
& (length> & for DEC only allowed for non-DB table) ( AD 417 )
Key field number was applied; save the data ( AD 418 )
Generic buffering requires a number of key fields to be entered ( AD 421 )
Table & cannot be buffered ( AD 422 )
& used in MC or view. Table type change not permitted ( AD 430 )
Table & used in VIEW table or in MC object & ( AD 431 )
Field & is used in view, MC or lock object and cannot be deleted ( AD 432 )
Key is already defined; field & cannot be in the key ( AD 434 )
Client field & is not in first field position, table is cross-client ( AD 435 )
Enter active data element and/or domain in field & ( AD 436 )
& & & is entered for background conversion ( AD 437 )
Domain & is active, check value table ( AD 446 )
Errors occurred when activating table & ( AD 447 )
Errors occurred when activating table & ( AD 448 )
Errors occurred during activation of dependent objects ( AD 449 )
Enter a valid structure name ( AD 451 )
Enter a valid transport request/correction ( AD 452 )
Final log: mass activation ( AD 453 )
ROUND 1: activation with internal checks ( AD 455 )
ROUND 2: activation with external checks ( AD 456 )
*R* Activation successful, refer to log: & ( AD 457 )
& & & was not activated ( & ) ( AD 458 )
*R* Error during activation, refer to log: & ( AD 459 )
& & & was not imported ( AD 463 )
& does not contain any objects to be activated ( AD 464 )
Object & & & was already activated ( AD 465 )
Mass activation ended with return code & ( AD 466 )
Mass activation RDDMASG0 &: ( AD 467 )
& error in routine & ( AD 471 )
& error in routine & ( AD 472 )
Function............. & & ( AD 481 )
Entry 'Create DB table & ' made for mass processing ( AD 486 )
Table of activation type 1; use C program to generate nametab ( AD 487 )
Entry 'Convert DB table &' made for mass processing ( AD 488 )
Object R3TR TABL & for mass processing already entered ( AD 489 )
Number of dependent tables:.................: & ( AD 490 )
Dependent table & ( AD 491 )
Entry & for index &-& made for mass processing ( AD 493 )
Inactive nametab..... & ( AD 495 )
Add fields to database table (3rd round) ( AD 496 )
Logs...... ......... & & ( AD 497 )
Stored in clipboard --> Paste with F7 ( AD 498 )
Data from & saved temporarily (F1=Long text documentation) ( AD 499 )
Data from & saved temporarily (F1=Long text documentation) ( AD 500 )
No. of key fields respected can only be specified for generic buffering ( AD 505 )
There was no active nametab ( AD 506 )
Table & (error reading fields from the inactive nametab) ( AD 507 )
No technical setting available for table & ( AD 508 )
Table is partially active, DB table has not been modified ( AD 511 )
Table is partially active; resolve the inconsistency ( AD 512 )
Technical settings for table & not consistent (Goto -> Act./Check Log) ( AD 513 )
Function can only be used by the system administrator ( AD 515 )
Gen. buffering calls for no. of key fields > 0 ( AD 516 )
Calculation of number of data records for size categories not possible ( AD 517 )
No. of fields in key deleted. Can only be maintained for gen. buffering ( AD 518 )
Object locked or no authorization ( AD 519 )
Partially active tables for domain (&) ( AD 520 )
Partially active tables for data element (&) ( AD 521 )
Partially active domains or data elements for table (&) ( AD 522 )
There are no technical settings for internal table & ( AD 523 )
Buffering not allowed.(-> No. of fields in gen. key must be 0) ( AD 529 )
& & not activated (error & &) ( AD 531 )
& & (flag for activation in table TACOB) ( AD 532 )
& & (activation only before & and after & o'clock) ( AD 534 )
& & & for mass processing already entered ( AD 535 )
Message & & in language & does not exist ( AD 536 )
Enter a valid log type ( AD 537 )
File could not be opened or closed ( AD 538 )
Enter a valid log mode ( AD 539 )
Enter a valid error category ( AD 540 )
Internal error (program &, routine &, error code &) ( AD 541 )
Table & (buffering authorization, buffering type inconsistent) ( AD 544 )
Define a data class and size category for transparent table & ( AD 545 )
Table & (too many generically buffered fields) ( AD 546 )
Technical settings for table & modified/generated ( AD 547 )
Technical settings for table & activated ( AD 548 )
Error in technical settings for table & ( AD 549 )
Generic entry not possible for numeric field types ( AD 551 )
Table & does not exist ( AD 552 )
No table authorization for table & ( AD 554 )
Table & is not a relational table ( AD 555 )
No values selected in the specified area ( AD 556 )
Maximum number of programs that can be generated reached ( AD 558 )
Table & is too wide to display (& bytes). ( AD 559 )
Caution: SELECT terminated after 100 runs ( AD 561 )
Internal error (& & &) ( AD 562 )
No database view exists for view & ( AD 563 )
View & cannot be displayed ( AD 564 )
An error occurred during generating (see long text) ( AD 566 )
Inactive nametab, without conversion & ( AD 567 )
& & inactive nametab with ADD FIELDS already exists ( AD 568 )
&-&: Foreign key is partial (check table field &) ( AD 570 )
Partial foreign key incorrectly specified - remove field names ( AD 571 )
Error in dependent table & (caused by & &) ( AD 572 )
&-&: partial foreign key incorrect (remove at * field) ( AD 573 )
Table & was activated as a direct table ( AD 574 )
Dependent table & successful (caused by & &) ( AD 575 )
Direct table & successful, caused by & & ( AD 576 )
&-&: foreign key constant incorrect (remove field names) ( AD 577 )
&-& (enter constant part of foreign key correctly) ( AD 578 )
Specified DB parameters are invalid ( AD 579 )
SQL error & in module &, function & occurred ( AD 581 )
Internal error & & in module & occurred ( AD 582 )
Internal error (F-16) occurred (refer to system log) ( AD 583 )
Gen. buffering not allowed, therefore no. of key fields must be 0 ( AD 584 )
Table & is of type & (technical settings cannot be defined/displayed) ( AD 586 )
Current table & has type & (no technical settings can be specified) ( AD 587 )
Data not saved. Gen. buffering calls for no. of key fields > 0 ( AD 589 )
Table &: new version only, 'Add fields' not allowed ( AD 590 )
Table & already changed, 'Add fields' not allowed ( AD 591 )
Table & (activation canceled due to database lock) ( AD 592 )
Table &: Active version partially active ( AD 593 )
Table & (no fields to append) ( AD 594 )
Table & (modification of DB table canceled (DB lock)) ( AD 597 )
Table & (modification of DB table delayed) ( AD 598 )
Do not change field 'DATALN' ( AD 601 )
No further key fields are specified in table & ( AD 602 )
Do not change field 'TABNAME' ( AD 603 )
Field & must be a key field ( AD 604 )
Key length greater than maximum key length & ( AD 605 )
No further data fields are specified in table & ( AD 606 )
Field & may not be a key field ( AD 607 )
Field & must be last field and of type 'RAW' ( AD 608 )
Table & is greater than the physical data page ( AD 609 )
Function length is greater than maximum functional length & ( AD 610 )
Table & already contains tables: Field cannot be changed ( AD 611 )
Table & already contains tables: Class cannot be changed ( AD 612 )
Table & does not contain a mandatory key field ( AD 613 )
Cluster & (function fields cannot be changed) ( AD 615 )
Field '&' not found ( AD 621 )
Clipboard empty ( AD 623 )
& fields copied to clipboard ( AD 624 )
Cluster fields reinitialized ( AD 627 )
Pool fields reinitialized ( AD 628 )
The fields cannot be reset (&-&) ( AD 629 )
Changing table type? Delete database table first ( AD 630 )
Changing table type? Delete data first ( AD 631 )
Foreign key &-& (inconsistency between header and structure) ( AD 632 )
Activate matchcode object & - no adding fields ( AD 635 )
Field & contains ' '. This is no longer supported ( AD 636 )
Field &1 contains '-'; change this now ( AD 637 )
Table of type ATAB only allowed with data section < & ( AD 639 )
No short/long name for entity types & ( AD 645 )
Table & (primary key is not compact) ( AD 646 )
Enter a valid tablespace ( AD 647 )
No source selected ( AD 648 )
No. of key fields > &. Conversion to type & not allowed ( AD 649 )
Error when deleting & ( AD 672 )
Do not use formatting characters in numeric fields ( AD 687 )
Tab. &: No. of key fields > & (no change possible in type TRANSP) ( AD 688 )
Field & (use other data type in pool key) ( AD 695 )
Generic key field is missing from logical cluster & ( AD 696 )
Field & (Data type is not allowed) ( AD 697 )
Field & (data element does not exist) ( AD 698 )
Field & (data element or domain is not active) ( AD 699 )
Table & has no database table ( AD 706 )
Table locked > See restart log (old) < Read long text ( AD 708 )
No inactive nametab exists ( AD 709 )
File & could not be opened ( AD 722 )
Data element & is partial ( AD 723 )
Domain & is partial ( AD 724 )
Minimum length & is assumed for data type & ( AD 728 )
Foreign key &-& (enter valid dependency factor) ( AD 730 )
Foreign key &-& (do not make any more entries on foreign key screen) ( AD 731 )
Foreign key &-& (with internal tables, flag as foreign key screen) ( AD 732 )
Foreign key &-& (use cardinality 1 : N or 1 : CN with 'TEXT') ( AD 733 )
Foreign key &-& (indicate the foreign key type) ( AD 734 )
Foreign key &-& (flag as a semantic foreign key) ( AD 735 )
Foreign key &-& (enter valid cardinality) ( AD 736 )
Check field &-& missing from foreign key field definition ( AD 737 )
& & too long for logging (must be < &) ( AD 738 )
Table &: Nametab missing; check consistency of ABAP Dictionary <-> DB ( AD 739 )
Max. number of temporary programs reached (try again later) ( AD 743 )
SQL error occurred during test access to table & ( AD 744 )
No inconsistencies found when checking the latest version ( AD 745 )
Only active version of technical settings exists (function not allowed) ( AD 746 )
Technical settings are new (function not possible) ( AD 747 )
Technical settings reset to active version ( AD 749 )
No version exists that can be reset ( AD 750 )
Error occurred when accessing the table ( AD 752 )
Physical pool/cluster does not exist in the database ( AD 753 )
Obtain approval for structure changes from head of development ( AD 755 )
Job & scheduled ( AD 757 )
Adjust database view if required ( AD 795 )
Version of >> active << object stored ( AD 796 )
Identical version already stored ( AD 798 )
Only a version of an active object can be stored ( AD 799 )
Error in parameter passing to dialog module ( AD 801 )
Field & does not exist in table & ( AD 802 )
Field & occurs more than once in index &-& ( AD 803 )
Index maintenance only possible for transparent tables ( AD 807 )
& is not allowed as index name (A-Z or 1-9) ( AD 808 )
Table still has no fields ( AD 811 )
Index &-& in being processed by & ( AD 813 )
Index &-& is new and is being edited by & ( AD 814 )
Index &-& (field & is not in the table) ( AD 815 )
Recreate database index for &-& ( AD 816 )
Delete database index for &-& ( AD 817 )
Index &-& does not contain fields ( AD 818 )
Delete database index for &-& and recreate ( AD 819 )
Conversion/ADD FIELDS for table with long raw field not allowed ( AD 844 )
Table & is too long (>&) ( AD 846 )
Table & (first delete database table) ( AD 850 )
Table & (first delete data and database table) ( AD 851 )
Length of table & > &. Conversion not possible in type TRANSP ( AD 852 )
&-& (no reference table/field combination &-& exists or data type wrong) ( AD 855 )
Table & (first delete data from the pooled table) ( AD 856 )
&-& (specify reference table AND reference field) ( AD 857 )
Field & (Value & = & not allowed) ( AD 858 )
First & places of name & identical to & ( AD 859 )
Table & (delete data from the cluster table) ( AD 860 )
Exception (database should not contain primary index) ( AD 861 )
You may not delete the primary index ( AD 862 )
Index could not be created ( AD 863 )
Error deleting operation/recreating index ( AD 864 )
Background processing not currently supported for primary indexes ( AD 867 )
Index & not defined in ABAP Dictionary ( AD 868 )
Index & exists in database but not in ABAP Dictionary (inconsistency) ( AD 871 )
Only the delete function can be used for this object ( AD 872 )
No authorization for action: & with object: & ( AD 878 )
&-& is reference field for &-&. Deletion not allowed ( AD 881 )
&-& is used in aggregate &. Delete not allowed ( AD 882 )
Table & and physical table & are not of same type ( AD 884 )
Structure change at field level (convert table &) ( AD 885 )
Fields were added. Database table is adjusted ( AD 886 )
&: Structure change at field level. Recreate database index ( AD 887 )
&: Structure change at field level. Database must be adjusted ( AD 888 )
&: Structure change at field level (modify the table dynpro) ( AD 889 )
Generic buffering of table & (at least 2 key fields required) ( AD 892 )
Program names starting with { or } are reserved for the DB utility ( AD 899 )
Error occurred when saving ( AD 912 )
Lock entry for & does not exist ( AD 916 )
Invalid CONTROL parameter ( AD 923 )
Table name is missing ( AD 925 )
Conversion of & from POOL to TRANSP unsuccessful ( AD 929 )
Technical settings for table &: 'transparent' flag reset ( AD 930 )
Transparent flag set. Convert table & ( AD 932 )
Table & is a cluster table. Buffering not allowed ( AD 934 )
Technical settings (new): Version cannot be stored ( AD 939 )
Table & (Statements could not be generated) ( AD 940 )
Table type change &->&. Database table must be created ( AD 942 )
Table type change &->&. Database table must be deleted ( AD 943 )
Table type change &->&. Database adjustment necessary ( AD 944 )
Active table & is lang.-spec. (no translation type defined) ( AD 946 )
Active table & is not language-dependent (translation type is defined) ( AD 947 )
System type or name cannot be determined ( AD 948 )
Table & must be created in the database ( AD 949 )
Field &-& (type & no longer supported from Release & onwards) ( AD 974 )
Field &-& (type & is no longer supported) ( AD 975 )
Operation terminated with errors ( AD 977 )
Domain & (data type VARC no longer supported from Release 3.0) ( AD 981 )
Request terminated with errors (see log) ( AD 982 )
A job has already been scheduled for the object ( AD 983 )
Entered for background processing (check job scheduling) ( AD 985 )
Table change made makes table language-dependent ( AD 986 )
Technical settings for & are already being edited ( AD 988 )
Activation currently locked (F1) ( AD 999 )
Could not determine movement type for dev.class & ( ADEX 003 )
Update of reference document failed due to technical reasons ( ADPIC 005 )
Errors in stock transport order ( ADPIC 011 )
Subitem created as &1 of material &2, only &3 &4 are available ( ADPIC 014 )
Base unit of measure differs for at least one material ( ADPIC 015 )
New schedule lines will be created ( ADPIC 017 )
System cannot determine the Customizing settings ( ADPIC 023 )
You cannot use material &1 ( ADPIC 024 )
A problem occurred during the ATP check ( ADPIC 026 )
The selected quantity was reduced to the available quantity ( ADPIC 027 )
You cannot open item details while material exchange screen is displayed ( ADPIC 028 )
Available qty cannot be determined due to missing Customizing settings ( ADPIC 035 )
Material exchange is not possible ( ADPIC 037 )
Multiple schedule line handling is not supported: ATP check rule &1 ( ADPIC 039 )
aterial &1 is a member of a supersession chain ( ADPIC 040 )
Saving started (&/&) ( ADPMPS 000 )
Saving completed (&/&) ( ADPMPS 001 )
Order & not found ( ADPMPS 003 )
Order & is locked ( ADPMPS 004 )
Order & is not clearly assigned ( ADPMPS 006 )
Order & was assigned to WBS element & ( ADPMPS 013 )
Status of order & does not allow any assignment ( ADPMPS 022 )
Background job could not be generated ( ADPMPS 040 )
Background job generated successfully ( ADPMPS 041 )
This function is only useful for orders ( ADPMPS 050 )
Overlapping times are inconsistent (not in sequence) ( ADPTM 001 )
Priority exceeds maximum value of & ( ADPTM 003 )
& & is already assigned to an inventory group (&) ( ADPTM 010 )
Select period indicator "Daily" ( ADPTM 015 )
Group type & has no unique Main Inventory Group ( ADPTM 024 )
Sort sequence number & is already assigned to object key & ( ADPTM 026 )
Interal SAP default profile must not be deleted ( ADPTM 027 )
Select a single object ( ADPTM 037 )
Select at least one processing status ( ADPTM 041 )
To run the current transaction, maintain the Customizing settings ( ADPTM 050 )
Order code not found in Customizing ( ADPTM 055 )
No text for order codes maintained in Customizing ( ADPTM 056 )
Attention: Changing rotable inventory model affects several processes ( ADPTM 060 )
Order code &1 is not defined ( &2 ) ( ADPTM 069 )
CMC Profile & is not defined ( ADPTM 072 )
Select a quantity for the priority autoswitch function ( ADPTM 073 )
Only stock conditions "serviceable" and "unserviceable" are defined ( ADPTM 074 )
Selection too big - process restricted to & orders ( ADPTM 100 )
Problems occured when reading order(s) ( ADPTM 108 )
Invalid password ( ADPTM 116 )
Priority value cannot be changed for order code & due to Customizing ( ADPTM 120 )
Internal error when calling &1 with error &2 ( ADPTM 123 )
Internal error in priority calculation when calling &1 &2 for order &3 ( ADPTM 126 )
Locking failed - update was not made for order & ( ADPTM 127 )
Priority rule cannot be determined for order code &1 prio key &2 (&3) ( ADPTM 128 )
You are not authorized to use Transaction & ( ADPTM 172 )
CMC profile & not defined in Customizing ( ADPTM 178 )
Order has external time restrictions; these will be overwritten ( ADPTM 183 )
Inconsistency in order relationship; different order codes in orders (&1) ( ADPTM 185 )
Order w. relationship - Only sequence type 'FS' allowed in CMC (&1) ( ADPTM 186 )
Order w. relationship - Operation number must equal sequence in CMC ( ADPTM 187 )
Order w. relationship - Operation number must be unique in CMC (&1) ( ADPTM 188 )
Unable to detect a material in order & ( ADPTM 189 )
ROC failed for order & - basic end date was not updated ( ADPTM 190 )
Object(s) selected - but nothing to display ( ADPTM 194 )
Unit inconsistence of operation &1 in order &2 ( ADPTM 205 )
& is not a SPEC2000 customer or vendor ( ADS2KIPARCH 012 )
Deletion is not possible, record & exists in table &. ( ADS2KIPARCH 014 )
If PRP is alpha, then an EC coded 11/13/14/15 must be present ( ADS2KIPUPL_AL 109 )
Your client installation of ABAP development tools in eclipse is outdated ( ADT_DATAPREVIEW_MSG 009 )
Cannot open AMDP data preview as the class '&1' contains syntax errors ( ADT_DATAPREVIEW_MSG 012 )
Not enough memory available; reduce the amount of selections ( ADW 027 )
You are not authorized to execute this transaction (see long text) ( ADW 065 )
Conversion exit cannot be activated ( AD_MPN_MESS 001 )
Material exchange is only possible if you are using storage locations ( AD_MPN_RBA_MESS 007 )
Cannot find structure node for material &1, item &2 ( AD_MPN_RBA_MESS 011 )
Equipment entered in functional location is not unique ( AD_MPN_RBA_MESS 014 )
Save order before checking availability ( AD_MPN_RBA_MESS 015 )
Delete structure node(s) in all components ( AD_MPN_RBA_MESS 018 )
Structure node &1 cannot be entered for material &2, item &3 ( AD_MPN_RBA_MESS 030 )
No equipment/functional location is specified (material &1, item &2) ( AD_MPN_RBA_MESS 031 )
Data cannot be displayed ( AD_SPCIP 503 )
No data found for this selection criteria ( AD_SPCIP 504 )
"&1" is not allowed for certain Parts (&2/&3 Parts processed) ( AD_SPCIP 515 )
Enhanced history not available ( AD_SPCIP 519 )
Maximum revision number exceeded ( AD_SPCIP 520 )
Maximum available revision(s) is & ( AD_SPCIP 521 )
Invalid value for parameter ADS2K_HISTORY ( AD_SPCIP 523 )
Set value for parameter ID ADS2K_HISTORY ( AD_SPCIP 524 )
User Parameter not set! & ( AD_SPCIP 879 )
Subcontracting type indicator contains an unallowed value ( AD_SUBCON 001 )
Material provision indicator cannot be used ( AD_SUBCON 016 )
Delivery and material document already exist for &1 ( AD_SUBCON 031 )
Material document already exists for &1 ( AD_SUBCON 032 )
MIGO is not possible for the item - use MB01 or ADSUBCON for posting ( AD_SUBCON 036 )
Selected type of subcontracting cannot be set ( AD_SUBCON 038 )
Special stock indicator &1 not defined in language &2 ( AD_SUBCON 040 )
&1 requires input of a WBS element ( AD_SUBCON 041 )
&1 requires input of a customer ( AD_SUBCON 042 )
&1 requires input of a sales document ( AD_SUBCON 043 )
&1 requires input of an owner ( AD_SUBCON 044 )
&1 &2 permits no input of a subcontracting type ( AD_SUBCON 049 )
&1 &2 permits no input of special stock for subcontracting ( AD_SUBCON 050 )
&1 &2 permits no input of a WBS element ( AD_SUBCON 051 )
&1 &2 permits no input of a customer ( AD_SUBCON 052 )
&1 &2 permits no input of a sales document ( AD_SUBCON 053 )
&1 &2 permits no input of an owner ( AD_SUBCON 054 )
No change of item category from &1 to &2 allowed ( AD_SUBCON 060 )
No change of material from &1 to &2 allowed ( AD_SUBCON 061 )
No change of plant from &1 to &2 allowed ( AD_SUBCON 062 )
Select either purchase orders, requisitions, or deliveries ( AD_SUBCON 070 )
Goods receipt for purchase order & & not possible ( AD_SUBCON 071 )
Goods issue for purchase order & & not possible ( AD_SUBCON 072 )
Creation of purchase order via purchase requisition & & not possible ( AD_SUBCON 073 )
Creation of delivery for purchase requisition & & not possible ( AD_SUBCON 074 )
Creation of delivery for purchase order item & & not possible ( AD_SUBCON 075 )
Select either purchase orders or purchase requisitions ( AD_SUBCON 076 )
Purchase orders not found ( AD_SUBCON 077 )
Purchase requisitions not found ( AD_SUBCON 078 )
Deliveries not found ( AD_SUBCON 079 )
Carry out transfer posting for purchase order & & via delivery ( AD_SUBCON 080 )
Tree level is negative ( AD_SUBCON 081 )
Display parameters of purchase requisitions are set ( AD_SUBCON 082 )
Display parameter of deliveries are set ( AD_SUBCON 083 )
Select account assignment either to order or to WBS element ( AD_SUBCON 084 )
Double click on document in overview to select ( AD_SUBCON 085 )
Purchase order & & with different vendor & ignored ( AD_SUBCON 086 )
GI not possible w/o selecting deliveries and material documents ( AD_SUBCON 087 )
GR not possible w/o selecting material documents ( AD_SUBCON 088 )
Creation of deliveries not possible w/o selecting deliveries and material ( AD_SUBCON 089 )
Creation of purchase order for purchase order & & not possible ( AD_SUBCON 090 )
Create delivery and post GI not possible w/o selecting deliveries ( AD_SUBCON 091 )
Create delivery and post GI/GR not possible w/o selecting material doc. ( AD_SUBCON 092 )
This account assignment and special stock combination is not allowed ( AD_SUBCON 094 )
For PO & &, batches on serial numbers are inconsistent ( AD_SUBCON 096 )
Selected type of subcontracting cannot be set manually ( AD_SUBCON 098 )
MPI & for material & not allowed because Subcontracting ind. not set ( AD_SUBCON 100 )
New material from exchange not in selection criteria ( AD_SUBCON 101 )
Incorrect movement type from BADI_ADSUB_MVT_TYPES ( AD_SUBCON 102 )
No materials selected for exchange ( AD_SUBCON 104 )
General error in purchase requisition for operation & ( AD_SUBCON 114 )
General error in reservations for operation & & ( AD_SUBCON 115 )
Goods receipt to storage location not allowed ( AD_SUBCON 116 )
Automatic assignment of serial numbers is not complete ( AD_SUBCON 117 )
In recursive repair, both materials (item and comp.) must be serialized ( AD_SUBCON 119 )
Storage location &1/&2 managed for handling units ( AD_SUBCON 121 )
Automatic distribution of consumables took place - Check PO ( AD_SUBCON 122 )
Automatic distribution of serial numbers took place - Check PO ( AD_SUBCON 123 )
No data has been selected. Please specify selection criteria ( AD_SUBCON 125 )
Rework material no. &1 equals rework material no. from subcontractor &2 ( AD_SUBCON 126 )
Goods issue for forward exchange purchase order item &1/&2 not possible ( AD_SUBCON 130 )
You have no authorization to create fwd exchange items in purchase orders ( AD_SUBCON 131 )
Forward exchange not possible: item &1/&2 already has subitems ( AD_SUBCON 132 )
It is not possible to combine different delivery types (&1/&2) ( AD_SUBCON 133 )
Forward exchange only possible for items with 'refurbishment' ( AD_SUBCON 136 )
There are already follow-up documents. Forward exchange is not possible ( AD_SUBCON 137 )
The purchase order is already invoiced. Forward exchange is not possible ( AD_SUBCON 138 )
Subcontracting with fwd exch. not supported (purch.requisition &1/&2) ( AD_SUBCON 139 )
Combination of material provision indicators for forw. exch. inconsistent ( AD_SUBCON 140 )
Material provision indicator &1 missing in table T417 (see long text) ( AD_SUBCON 143 )
Ship-to-party for delivery missing ( AD_SUBCON 155 )
PO already created, order change is not possible ( AD_SUBCON 160 )
No special stock allowed ( AD_SUBCON 163 )
The quantity of the PO main item must be the same as for the component ( AD_SUBCON 164 )
GR non-valuated flag has been set to 'X' ( AD_SUBCON 165 )
Purchase order item is not relevant for subsequent adjustment ( AD_SUBCON 181 )
New BOM explosion is not possible ( AD_SUBCON 182 )
Manually adapt component quanties (partial issues) ( AD_SUBCON 185 )
&1 selected serial number(s) are already assigned to a delivery ( AD_SUBCON 188 )
Serial number assignment in this case not supported (see long text) ( AD_SUBCON 190 )
Refurbishment order with subcontracting is not valid (see long text) ( AD_SUBCON 201 )
Header update with the plant &1 from the component &2 item &3 ( AD_SUBCON 207 )
Forward exchange is not supported ( AD_SUBCON 208 )
Header update with storage location &1 and batch/valuation type &2 ( AD_SUBCON 210 )
BAdI: Different storage locations: &1 copied from equipment &2 ( AD_SUBCON 211 )
Master batch &1 of equipment &2 different from component batch &3 ( AD_SUBCON 216 )
Decentralized warehouse storage location (&1/&2) is not supported ( AD_SUBCON 219 )
HU-managed storage location (&1/&2) is not supported ( AD_SUBCON 220 )
BAdI: different &1 are not allowed ( AD_SUBCON 224 )
Component &1 in operation &2 of the task list is deleted ( AD_SUBCON 226 )
Incorrect special stock assignment in main components of operation &1 ( AD_SUBCON 231 )
Goods movements not executed in correct order (operation &1) ( AD_SUBCON 232 )
Incorrect material number or quantity in main components of operation &1 ( AD_SUBCON 233 )
MRP relevance display is not valid (operation &1) ( AD_SUBCON 234 )
Material does not exist in header data: &1 &2 &3 &4 ( AD_SUBCON 238 )
Valuation type &1 of the header is not available for &2 in plant &3 ( AD_SUBCON 239 )
Order & has the order category & ( AD_SUBCON 245 )
Subcontracting flag cannot be set when follow-up material added already ( AD_SUBCON 249 )
Initial material number not allowed for A&D subcontracting item & ( AD_SUBCON 251 )
Subcontracting allowed for external processing operations only ( AD_SUBCON 252 )
Serial numbers reassignment can not be completed during material exchange ( AD_SUBCON 254 )
Goods receipt is not allowed for enhanced refurbishment order in MIGO ( AD_SUBCON 256 )
Specify a valid purchase order. ( AD_SUBCON 257 )
Rounding not possible. Check serial number assignment in purchase order. ( AD_SUBCON 259 )
Serial number or material number in master data changed after transfer. ( AD_SUBCON 261 )
Fiscal year variant & not allowed ( AF 001 )
Fiscal year variant &1 is not maintained for calendar year &2 ( AF 002 )
SYST: Period & not defined ( AF 003 )
SYST: Date & not provided for ( AF 004 )
No fiscal year variant specified ( AF 005 )
This function is no longer supported. Please use &1 instead. ( AFLE 013 )
Generic table key found in request &1 ( AFLE_XPRA 004 )
Error when updating database: &1 see following lines for details ( AFLE_XPRA 006 )
&1: Fields of analysis structure &2 do not match sample Customizing ( AFODR_SC 004 )
Financial object generation set to partially active ( AFODR_SC 010 )
Client-dependent settings cannot be changed ( AFODR_SC 013 )
No financial objects for securities transactions were converted ( AFO_FO 202 )
Unable to read application object ( AFO_FOI 000 )
Payment flows deleted from the administration table ( AFO_FOI 004 )
Unable to delete entries from the administration table ( AFO_FOI 005 )
Derivation resulted in data errors in the analysis part ( AFO_FOI 014 )
The data in the general part of the financial object contains errors ( AFO_FOI 015 )
Facility with internal number &1 does not exist ( AFO_FOI 201 )
Object for transaction & has been postprocessed successfully ( AFO_FOI_PP 001 )
Object for transaction & has already been postprocessed ( AFO_FOI_PP 002 )
You have no authorization for activity &1 for benchmark &2 ( AFWBM_MAIN 005 )
You have no authorization for activity &1 for benchmark &2 (auth.grp &3) ( AFWBM_MAIN 006 )
Creation of a new version of benchmark &1 with validity date &2 ( AFWBM_MAIN 008 )
Dependent data exist for validity date &1; function is limited ( AFWBM_MAIN 009 )
Benchmark &1 with validity date &2 is inconsistent ( AFWBM_MAIN 030 )
Benchmark &1, validity date &2 was saved with the status "Inconsistent" ( AFWBM_MAIN 032 )
Unable to delete benchmark; dependent evaluation data exists ( AFWBM_MAIN 044 )
Status of the version has changed; update failed ( AFWBM_MAIN 048 )
No reference exists from the benchmark to a change history ( AFWBM_MAIN 049 )
Unable to save the data; enter a reason ( AFWBM_MAIN 050 )
Enter a reason, and then save the data ( AFWBM_MAIN 055 )
A benchmark is already assigned to the selected portfolio hierarchy node ( AFWBM_MAIN 103 )
Caution! You are changing the assignment of the benchmark to a PH node ( AFWBM_MAIN 119 )
Unable to save the data; it is assigned to an invalid benchmark ( AFWBM_MAIN 120 )
Choose at least one characteristic ( AFWCH_DB 001 )
Segment level characteristc saved under the technical name & ( AFWCH_DB 002 )
No change authorization, display only ( AFWCH_DB 003 )
No authorization to change or display segment level characteristics ( AFWCH_DB 004 )
Additional characteristics were selected due to characterist. compounding ( AFWCH_DB 007 )
Data cannot be changed due to system settings; display only ( AFWCH_DB 009 )
No segment level characteristics maintained for analysis structure & ( AFWCH_DB 010 )
No fixed segment level characteristics required for analysis struct. & ( AFWCH_DB 011 )
Only one view is permitted for analysis structure & ( AFWCH_DB 013 )
No active analysis structure available ( AFWCH_DB 014 )
Active analysis structure does not exist ( AFWCH_DB 015 )
No fixed segment level character. expected for active analysis structure ( AFWCH_DB 016 )
No segment level characteristics in client &1 for analysis structure &2 ( AFWCH_DB 017 )
Proposal for segment level characteristics was generated (see long text) ( AFWCH_DB 019 )
No characteristics found in table of sample settings ( AFWCH_DB 105 )
Characteristic & already existed and was not changed ( AFWCH_DB 106 )
Activation of characteristics from sample settings was terminated ( AFWCH_DB 107 )
Unable to create analysis structure ( AFWCH_DB 108 )
Characteristic & created successfully ( AFWCH_DB 109 )
Analysis struct. & is not active in data dictionary; activity terminated ( AFWCH_DB 112 )
No authorization to create/change characteristics and analysis structures ( AFWCH_DB 123 )
No portfolio hierarchies exist in client &1 for view &2 ( AFWCH_DB 126 )
Characteristics in analysis struct. & do not match sample Customizing ( AFWCH_DB 132 )
No authorization to change Customizing settings for analysis structures ( AFWCH_DB 133 )
Characteristics in analysis struct. & do not match sample Customizing ( AFWCH_DB 137 )
Use transaction SLG1 to display the log that was saved ( AFWCH_DB 147 )
Use characteristics from previously active analysis structure in LM ( AFWCH_DB 301 )
Error when checking whether the characteristics are used in Limit Mgmt ( AFWCH_DB 302 )
No selections have been entered for the chosen filter ( AFWCH_FL 002 )
Filter selections are inconsistent ( AFWCH_FL 004 )
No text has been entered for the selected filter ( AFWCH_FL 005 )
The selected filter already exists - display only ( AFWCH_FL 006 )
Error occurred while initializing dynamic selection ( AFWCH_FL 008 )
Error in dialog for dynamic selection ( AFWCH_FL 009 )
You have not chosen selections for this filter ( AFWCH_FL 017 )
Unable to transfer & of & selections when copying the data ( AFWCH_FL 029 )
In the copy function, the selections can be displayed only ( AFWCH_FL 030 )
No changes permitted (according to the system settings) - Display only ( AFWCH_FL 031 )
Error occurred while recording transport - display only ( AFWCH_FL 032 )
Dependent data exists - display only ( AFWCH_FL 034 )
The filter exists in combinations & - Display only ( AFWCH_FL 036 )
Characteristic &1 is not unique without &2 ( AFWCH_FL 038 )
Value "&3" of char. &2 cannot be used with char. &1 with value "&4" ( AFWCH_FL 039 )
A single filter already exists for this characteristic ( AFWCH_FL 044 )
Filter category & is NOT supported by FO selection ( AFWCH_FL 045 )
Filter definitins can be extended only (dependent evaluation data) ( AFWCH_FL 048 )
Filter & is inconsistent due to an incorrect transport ( AFWCH_FL 053 )
Filter & was used as a template for another filter ( AFWCH_FL 065 )
No base portfolios exist for filter & (segments) ( AFWCH_FL 068 )
Value '#' as a place holder for the inital value is invalid ( AFWCH_FL 071 )
Choose a name that does not just contain zeros ( AFWCH_PH 001 )
Portfolio hierarchy & cannot be changed (evaluation data exists) ( AFWCH_PH 002 )
PH &1 / &2: Business partner conversion has not been completed ( AFWCH_PH 003 )
Portfolio hierarchy & can be enhanced only, as evaluation data exists ( AFWCH_PH 005 )
Filter & is assigned to filter category &, which is not permitted ( AFWCH_PH 032 )
Due to status of filter &2, portfolio hierarchy &1 is inconsistent ( AFWCH_PH 034 )
Portfolio hierarchy & is inconsistent and cannot be updated/generated ( AFWCH_PH 035 )
Single object selection does not match filter for single recs proc. ( AFWGO_MESSAGES 004 )
Basic run has already been executed - test run will not write a log ( AFWGO_MESSAGES 015 )
Single records procedure has been archived for &1 ( AFWGO_MESSAGES 016 )
Single records procedure has been reversed for &1 ( AFWGO_MESSAGES 017 )
Test run was executed for &1 ( AFWGO_MESSAGES 018 )
Basic run (data import) has already been executed for &1 ( AFWGO_MESSAGES 020 )
No data has been imported so far for this single records procedure ( AFWGO_MESSAGES 021 )
No basic run has been executed so far for key date & ( AFWGO_MESSAGES 023 )
Date for the end of the period is in the future ( AFWGO_MESSAGES 028 )
Key figures from various applications in single records procedure &1 ( AFWGO_MESSAGES 033 )
Key figure &1 is already used in this evaluation procedure ( AFWGO_MESSAGES 039 )
Data cannot be saved ( AFWGO_MESSAGES 040 )
Single rec. proc. &1 cannot be changed, run has already been executed ( AFWGO_MESSAGES 043 )
Final results proc. &1 cannot be changed, run has already been executed ( AFWGO_MESSAGES 044 )
Single rec.proc. &1 cannot be changed (corresponding fin.res.proc.exists) ( AFWGO_MESSAGES 045 )
Fin. results proc. &1: Key date- and period-related key figures mixed ( AFWGO_MESSAGES 046 )
Key figures from different applications in final results proc. &1 ( AFWGO_MESSAGES 047 )
Key figure &1 is not permitted in a single records procedure ( AFWGO_MESSAGES 048 )
Key figure &1 is not permitted in a final results procedure ( AFWGO_MESSAGES 049 )
Fin. results proc. &1 has already been run successfully for date &2 ( AFWGO_MESSAGES 051 )
Fin. results proc. &1 has already been partially run for date &2 ( AFWGO_MESSAGES 052 )
Invalid key figures in final results procedure &1 ( AFWGO_MESSAGES 053 )
The corresponding single rec. procedure has not yet been run successfully ( AFWGO_MESSAGES 055 )
Single records procedure &1 for &2 has not yet been run ( AFWGO_MESSAGES 056 )
Use a saved data set ( AFWGO_MESSAGES 058 )
The two base key figures of key figure &1 have different currencies ( AFWGO_MESSAGES 062 )
Deleting financial object records entered manually as per filter ( AFWGO_MESSAGES 063 )
Filters cannot be used for saved data sets ( AFWGO_MESSAGES 064 )
Correction runs cannot be used with saved data sets ( AFWGO_MESSAGES 065 )
The two base key figures for &1 do not use the same base key figure/NPV ( AFWGO_MESSAGES 067 )
View of saved data set(&1) does not match that used in the procedure (&2) ( AFWGO_MESSAGES 068 )
Portfolio hierarchy of saved data set (&1) does not match fin. rslts proc ( AFWGO_MESSAGES 069 )
Final results procedure &1 on &2 was not run successfully ( AFWGO_MESSAGES 078 )
Use of a saved data set is not permitted ( AFWGO_MESSAGES 079 )
Portfolio hierarchy &1 is inconsistent due to filter &2 ( AFWGO_MESSAGES 083 )
Position category of key figure &1 (&3) is not permitted ( AFWGO_MESSAGES 086 )
Item calculation '&3' for key figure &1 (RACFPOS) is not permitted ( AFWGO_MESSAGES 089 )
Final results proc. &1 on &2 completed with errors ( AFWGO_MESSAGES 090 )
Internal error while updating the results database ( AFWGO_MESSAGES 091 )
Final results procedure &1 executed successfully for &2 ( AFWGO_MESSAGES 092 )
Final results procedure &1 simulated successfully for &2 ( AFWGO_MESSAGES 093 )
Internal error while reading results database ( AFWGO_MESSAGES 094 )
&1 analysis results records deleted successfully ( AFWGO_MESSAGES 095 )
Deletion of &1 analysis results records simulated successfully ( AFWGO_MESSAGES 097 )
Final results proc. &1 on &2 simulated successfully, some errors occurred ( AFWGO_MESSAGES 098 )
Internal error while deleting data from the results database ( AFWGO_MESSAGES 099 )
Unable to select shift scenarios for display ( AFWGO_MESSAGES 108 )
PH &1, node &2, date &3: Numeric error while calculating MWRR ( AFWGO_MESSAGES 111 )
No market data found for evaluation procedure &1 on &2 ( AFWGO_MESSAGES 152 )
Transaction terminated: sgle rec.proc. &1 contains inconsistent filter &2 ( AFWGO_MESSAGES 155 )
SRP &1 contains key figure &2 with category NPV/base key figure ( AFWGO_MESSAGES 160 )
No basic run has been executed yet for evaluation date & ( AFWGO_MESSAGES 206 )
Final results procedure &1 has already been run; deletion not permitted ( AFWGO_MESSAGES 251 )
Single records procedure &1 has already been run; deletion not permitted ( AFWGO_MESSAGES 252 )
Data selected from saved data set &1; number of objects: &2 ( AFWGO_MESSAGES 300 )
Deletion function can also be used for composite benchmarks ( AFWGO_MESSAGES 418 )
Unable to delete the key figure values for benchmark & key figure & ( AFWGO_MESSAGES 419 )
Key figure values already exist for benchmark &1, key fig.&2, from &3-&4 ( AFWGO_MESSAGES 420 )
Error when calculating key figure values for benchmark &1, key figure &2 ( AFWGO_MESSAGES 434 )
Key fig. value was overwritten for benchmark &1, key fig. &2, key date &3 ( AFWGO_MESSAGES 437 )
You are not authorized to run this transaction ( AFWGO_MESSAGES 443 )
Key figures &1 and &2 have different properties ( AFWGO_MESSAGES 448 )
Key figure &1 is not assigned to any evaluation procedure on date &2 ( AFWGO_MESSAGES 801 )
Single records procedure &1 does not exist on date &2 ( AFWGO_MESSAGES 802 )
No key figures assigned to single records procedure &1 on date &2 ( AFWGO_MESSAGES 803 )
Final results procedure &1 not found ( AFWGO_MESSAGES 804 )
No key figures assigned to final records procedure &1 on &2 ( AFWGO_MESSAGES 807 )
You cannot change single records procedure &1 on &2 ( AFWGO_MESSAGES 808 )
You cannot change final results procedure &1 on &2 ( AFWGO_MESSAGES 809 )
Incorrect PA flow customizing: No direction exists ( AFWGO_MESSAGES 816 )
No package exists in the object data for object & ( AFX_GENERATION 075 )
The package assigned to object & does not exist ( AFX_GENERATION 076 )
Unknown error when checking the start prerequisites ( AFX_GENERATION 077 )
There is no workbench request in the object data for object & ( AFX_GENERATION 078 )
There is no customizing request in the object data for object & ( AFX_GENERATION 079 )
The workbench request assigned to object & does not exist ( AFX_GENERATION 080 )
The Customizing request assigned to object & does not exist ( AFX_GENERATION 081 )
The workbench request assigned to object & can no longer be changed ( AFX_GENERATION 082 )
The Customizing request assigned to object & can no longer be changed ( AFX_GENERATION 083 )
The enhancement category has been adjusted ( AFX_GENERATION 139 )
The runtime data for the global data is incomplete ( AFX_GENERATION 142 )
The residence time for archiving object &1 must be at least &2 day(s) ( AFX_GLOBAL 002 )
Control information not found for archiving object & ( AFX_GLOBAL 005 )
Resubmission period must be at least 1 day ( AFX_GLOBAL 011 )
Enter a valid period unit for the resubmission period ( AFX_GLOBAL 012 )
Enter a valid residence time ( AFX_GLOBAL 013 )
Enter a valid period unit for the residence time ( AFX_GLOBAL 014 )
Period unit &1 is invalid ( AFX_GLOBAL 015 )
The residence time for archiving object &1 must be at least &2 day(s) ( AFX_GLOBAL 016 )
Control information not found for archiving object & ( AFX_GLOBAL 024 )
Enter a valid residence time ( AFX_GLOBAL 025 )
Enter a valid period unit for the residence time ( AFX_GLOBAL 026 )
Period unit &1 is invalid ( AFX_GLOBAL 027 )
You are not authorized to archive '&' ( AFX_GLOBAL 102 )
You are not authorized to archive &1 ( AFX_GLOBAL 104 )
You are not authorized to archive &1 ( AFX_GLOBAL 105 )
Number assignment for the activity log has failed ( AFX_GLOBAL 108 )
Parallel processing cannot be started owing to concurrent runs ( AFX_GLOBAL 112 )
Internal error: Unexpected EXCEPTION in function module &1 ( AFX_GLOBAL 123 )
Error adding to table &1 &2 &3 &4 ( AFX_GLOBAL 137 )
Error changing table &1 &2 &3 &4 ( AFX_GLOBAL 138 )
Error making deletions in table &1 &2 &3 &4 ( AFX_GLOBAL 139 )
The global residence time was used for at least one object ( AFX_GLOBAL 143 )
Interruption for activity log &1 is not yet possible ( AFX_GLOBAL 146 )
Variant &1 for program &2 could not be found ( AFX_GLOBAL 147 )
No interruptible jobs found for activity ID &1 on &2 / &3 ( AFX_GLOBAL 166 )
No more jobs found for activity ID &1 on &2 / &3 ( AFX_GLOBAL 167 )
Archiving obj. &1: Delete program variant inconsistent w. archiving mode ( AFX_GLOBAL 175 )
Inconsistency in the generated package template ( AFX_GLOBAL 176 )
No function module found for package formation procedure &2 ( AFX_GLOBAL 178 )
Internal error when navigating to object &1 &2 ( AFX_POSTEDIT 001 )
The requested task cannot be performed yet ( AFX_POSTEDIT 002 )
The required transport requests could not be generated ( AFX_WIZARDS 004 )
The package name specifies a local package ( AFX_WIZARDS 011 )
You have not defined a name prefix or namespace ( AFX_WIZARDS 017 )
The segment name must not be longer than 21 characters ( AFX_WIZARDS 018 )
The name of the transport object must start with &1 ( AFX_WIZARDS 021 )
An error occurred when abbreviating the object name ( AFX_WIZARDS 025 )
The name of the function module must start with & ( AFX_WIZARDS 031 )
The name of the function group must start with & ( AFX_WIZARDS 032 )
No Customizing transaction selected for archiving object & ( AFX_WIZARDS 046 )
Error when determining the include name for the check function ( AFX_WIZARDS 047 )
Package &1 of object &2 not found ( AFX_WIZARDS 054 )
Workbench request &1 of object &2 not found ( AFX_WIZARDS 057 )
Customizing request &1 of object &2 not found ( AFX_WIZARDS 058 )
Workbench request &1 of object &2 can no longer be changed ( AFX_WIZARDS 059 )
Customizing request &1 of object &2 can no longer be changed ( AFX_WIZARDS 060 )
The name prefix must not start with a "T" ( AFX_WIZARDS 063 )
The parallel processing methods for analysis already exist ( AFX_WIZARDS 087 )
No read/write modules could be determined from the runtime data ( AFX_WIZARDS 096 )
Control information not found for archiving object & ( AFX_WIZARDS 102 )
Error when abbreviating the variable name ( AFX_WIZARDS 103 )
The parallel processing methods for the write program already exist ( AFX_WIZARDS 104 )
The total length of the structure must not exceed 40 bytes ( AFX_WIZARDS 105 )
Primary key of the master table does not permit dynamic package formation ( AFX_WIZARDS 116 )
Field name is not an attribute from the archiving object's master table ( AFX_WIZARDS 123 )
AFX object &1 cannot be deleted ( AFX_WORKBENCH 010 )
Task "&1" (&2) does not yet have a valid end status ( AFX_WORKBENCH 018 )
Task "&1" (&2) has already been executed ( AFX_WORKBENCH 032 )
Internal error: GUI control (see long text) ( AFX_WORKBENCH 900 )
Internal error: Database (see long text) ( AFX_WORKBENCH 902 )
Check the settings for checking group &1 and checking rule &2 ( AG 001 )
Sales order item number not specified in requirement ( AG 004 )
Factory calendar missing or error in factory calendar &1 ( AG 014 )
Customer number not specified in one requirement ( AG 015 )
A requirement needs to be checked against the forecast and ATP logic ( AG 016 )
Error calling ATP Server: &1, &2 ( AG 022 )
Error in calling up function '&1' in APO server '&2': &3 ( AG 023 )
No checking group is maintained for product &1, plant &2 in matl master ( AG 024 )
Past receipts were taken into account ( AG 031 )
Receipts in the past were not included ( AG 032 )
SCM version is too low for RBA control at item level ( AG 033 )
Item &1, &2: MISL group cannot be deleted; SCM version too low ( AG 034 )
Plant substitution in the item is not possible for MRP areas ( AG 035 )
Material &1 in plant &2 is APO-relevant ( AG 115 )
The ATP server cannot be updated (table &1) (area &2) ( AG 201 )
Unknown error in call &1 ( AG 202 )
RFC error in call &1: &2&3 ( AG 203 )
Distribution function &1 in plant &2 is incorrect ( AG 204 )
Distribution function &1 in plant &2 is incorrect ( AG 205 )
Error calling function for reading the batch stocks ( AG 206 )
ATP Server not set up ( AG 207 )
The grouping element could not be determined for &1, &2, &3 ( AG 208 )
Projects belonging to &1, &2, &3 could not be determined ( AG 209 )
Error occurred when determining MRP area for &1, &2, &3, &4 ( AG 210 )
MRP area for &1, &2 not determined - continue with plant MRP aea &3 ( AG 211 )
The grouping element could not be determined for &1, &2, &3 ( AG 212 )
Programming error: unknown table ID &1 ( AG 221 )
Programming error: unknown processing status &1 ( AG 222 )
Programming error: data already aggregated ( AG 223 )
Programming error: status sequence &1 after &2 not permitted ( AG 224 )
Program error: incorrect call of function &1 using parameter &2 ( AG 501 )
Material & is locked (availability check not possible) ( AG 602 )
Planning material & is locked (assignment check not possible) ( AG 603 )
Material & is blocked (Blocking table has not been updated) ( AG 605 )
Planning material & is blocked (Blocking table has not been updated) ( AG 606 )
Availability check is not possible ( AG 608 )
The change leads to an overconfirmation in the amount of &1 ( AG 762 )
Rounding: &1 &4 was rounded down by &2 &4 to &3 &4 ( AG 813 )
Rounding: &1 was rounded to &2 (base unit of measure). Reference: &3 &4 ( AG 814 )
&3: No target system available for SU24 client &1 of system &2. ( AGRDIST 008 )
Single role &1 of composite role &2 is not registered. ( AGRDIST 010 )
Single role &1 of composite role &2 is not marked for deletion. ( AGRDIST 011 )
The imparting roles for role &1 are not all registered. ( AGRDIST 012 )
Error during RFC call to destination &1 (see long text). ( AGRDIST 030 )
Agreement entered in a different system; it can only be maintained there ( AGR_MAINTENANCE_CHCK 001 )
Agreement &1 entered in a different system, copying not allowed ( AGR_MAINTENANCE_CHCK 002 )
Agreement &1 entered in a different system, changes not allowed ( AGR_MAINTENANCE_CHCK 003 )
Agreement entered in a different system and marked as deleted ( AGR_MAINTENANCE_CHCK 004 )
Agreement created in another system; settlemnt + maint.only allowed there ( AGR_MAINTENANCE_CHCK 005 )
Agreement created and deleted in another system; no settlement or maint. ( AGR_MAINTENANCE_CHCK 006 )
Agreement &1 entered in a different system, only limited changes possible ( AGR_MAINTENANCE_CHCK 008 )
Error checking incoming data ( AGR_MAP 100 )
Data exchange terminated ( AGR_MAP 101 )
Previous exchange not completely ended. Termination ( AGR_MAP 126 )
Lock entry in table CND_MAPC_INF_DNL fehlt ( AGR_MAP 128 )
&3 records successfully processed for object &2 in BDoc &1 ( AGR_MAP 160 )
BDoc &1 for object &2 could not be processed in R/3 adapter ( AGR_MAP 161 )
Delta Update Agreement: Campaign &1, OLTP Agreement &2, CRM Agreement &3 ( AGR_MAP 169 )
Object &1 and &2 have different filters for table &3 ( AGR_MAP 183 )
Object &1 has no filter for tab. &2; but objects with filters exist ( AGR_MAP 184 )
No valid exchange object exists for table &1 ( AGR_MAP 185 )
Upload required ( AGR_MAP 188 )
Download required ( AGR_MAP 189 )
Upload and download required ( AGR_MAP 190 )
Could not get destinaton 'SAP_BIEX' to BW system ( AGSESR 030 )
This is not the correct Solution Manager system ( AGSEX_MSG 000 )
This Issue has been updated ( AGSEX_MSG 001 )
RFC-User is not authorized to get data from service session system ( AGSRBE 000 )
Analysis Project structure language will differ from logon language ( AGSRBE 007 )
You are not authorized to run this application ( AGSRBE 010 )
You are not authorized to create/change an Analysis Project ( AGSRBE 020 )
You are not authorized to create an Analysis ( AGSRBE 022 )
You are not authorized to schedule an Analysis ( AGSRBE 023 )
You are not authorized to delete an analysis project/analysis ( AGSRBE 024 )
You are not authorized to create an Analysis ( AGSRBE 030 )
File type not supported ( AGSRBE 032 )
You are not authorized to change Rule Database ( AGSRBE 040 )
Solution Manager project '&1' is being created in the background ( AGSRBE 042 )
You are not authorized to display Analysis Results ( AGSRBE 050 )
No Logical Component found in Solution Manager Project '&1' ( AGSRBE 054 )
No Logical Component found in Solution '&1' ( AGSRBE 055 )
You are not authorized to download content ( AGSRBE 060 )
Product version selection is not unique ( AGSRBE 062 )
Objects with logical component '&1' cannot be assigned. See long text ( AGSRBE 071 )
No derived analyses for the current project; see long text ( AGSRBE 074 )
Enter a password with at least &1 special characters ( AGSRBE 085 )
You are not authorized to perform this action ( AGSRBE 100 )
You are not authorized to display solution '&1' ( AGSRBE 101 )
&1 Manual Ratings equal the Tool Rating and will be deleted. ( AGSRBE 107 )
&1 Manual Rating equals the Tool Rating and will be deleted. ( AGSRBE 110 )
Descriptive check step results can be displayed only for a single period ( AGSRBE 125 )
Logical component '&1' doesn't exist ( AGSRBE 153 )
Analysis created ( AGSRBE_ANA 200 )
Analysis started ( AGSRBE_ANA 201 )
Analysis finished ( AGSRBE_ANA 202 )
Value adapted to the one from input field 'Test Coverage' ( AGSSEA_BASE 033 )
Internal error; Create support message ( AGSSEA_RECOMMEND 000 )
Status schema can no longer be assigned ( AGSTWB 002 )
Status schema can no longer be changed ( AGSTWB 003 )
The test case assignment will be lost ( AGSTWB 027 )
Workflow transaction documents are updated in background ( AGSTWB 110 )
Configuration error in the Test Workbench. Application error (&1 types) ( AGSTWB 131 )
Transaction type for application &1 not unique for test plan &2 ( AGSTWB 135 )
( AGSWCIT 019 )
Analysis is running under result &1. Please refresh list. ( AGSWCIT 026 )
Analysis is scheduled under result &1. Please refresh list. ( AGSWCIT 027 )
No system role selected ( AGSWCIT 044 )
No system role selectable ( AGSWCIT 048 )
Start update by pressing the button "Execute (F8)". ( AGSWCIT 057 )
Status update will run immediatly. Please refresh list when finished. ( AGSWCIT 058 )
Status update runs in background. Please refresh list when finished. ( AGSWCIT 059 )
No specific solution is given. ( AGSWCIT 080 )
No specific project is given. ( AGSWCIT 081 )
Current Editor for notes is not supported ( AGSWCIT 103 )
No authorization. Objects removed from the list ( AGSWCIT 115 )
The list only shows existing objects ( AGSWCIT 117 )
Editor of current note is not supported ( AGSWCIT 124 )
Messages with obsolete type will not be copied ( AGSWCIT 231 )
Assignment cannot be deleted ( AGS_APPL_MGNT 050 )
Business transaction &1 is locked by user &2. Check-out cancelled ( AGS_APPL_MGNT 051 )
Business transaction &1 is locked by user &2. Action cancelled ( AGS_APPL_MGNT 053 )
This action is not allowed for this component. ( AGS_BPM_MSG 001 )
No contacts assigned to the Solution which can be used in a Team ( AGS_BPM_MSG 128 )
You cannot add any further member to the team. ( AGS_BPM_MSG 129 )
Missing assignment to logical component of step &1 in solution &2 ( AGS_BPM_MSG 149 )
CCLM Landscape not set up properly. Read long text for further details ( AGS_CC 002 )
Not all selected session packages can be activated. ( AGS_DSWP_INFRA 022 )
You are not authorized for the action. ( AGS_EJR_AUTH 000 )
Web Dynpro service &1 is inactive ( AGS_EJR_CONFIG 030 )
BC Set &1 is not (entirely) active ( AGS_EJR_CONFIG 031 )
Authorization for activity &1 of object &2 not assigned (role &3) ( AGS_EJR_CONFIG 032 )
The job documentation is not data source for any process in solution &1 ( AGS_EJR_CONFIG 051 )
You are not authorized to display this application log ( AGS_EJR_JOBLOG_MSG 056 )
Can not logon to system &1, check your RFC ( AGS_EJR_JOB_MAN_WC 016 )
Can not schedule job &1 with schedule mode 'Hourly' ( AGS_EJR_JOB_MAN_WC 022 )
System &1 Client &2 is not assigned to your Business Partner &3 ( AGS_EJR_JOB_REQ_MSG 024 )
You are about to schedule the job directly in the managed system. ( AGS_EJR_JOB_REQ_MSG 045 )
You are about to request your job in the Solution Manager System. ( AGS_EJR_JOB_REQ_MSG 047 )
Basic Job Request supports only scheduler type XBP. ( AGS_EJR_JOB_REQ_MSG 054 )
Organizational data was assigned to the job documentation ( AGS_EJR_MACRO 003 )
Error Activating ICF Service &1 ( AGS_EJR_MESSAGE 002 )
No more solutions/business cases can be added ( AGS_EJR_MESSAGE 006 )
No logical component selected ( AGS_EJR_MESSAGE 030 )
No system selected ( AGS_EJR_MESSAGE 031 )
System is not assigned to the leading role ( AGS_EJR_MESSAGE 032 )
SAP CPS and BPM integration is inactive ( AGS_EJR_MESSAGE 080 )
Error in communication with SAP CPS ( AGS_EJR_MESSAGE 081 )
Function not available. Refresh the ST-SER component ( AGS_EJR_MESSAGE 082 )
No RFC connection to target system ( AGS_EJR_MESSAGE 200 )
Scheduling not changed because there are several subsequent jobs ( AGS_EJR_MESSAGE 240 )
The wildcard '*' cannot be used in all message fields ( AGS_EJR_MESSAGE 251 )
The solution has not yet been migrated ( AGS_EJR_MESSAGE 450 )
Solution &1 has not yet been migrated ( AGS_EJR_MESSAGE 451 )
Perform the migration with the transaction SOLMAN_SETUP ( AGS_EJR_MESSAGE 455 )
Migrate solution &1 with transaction SOLMAN_SETUP ( AGS_EJR_MESSAGE 456 )
No systems for query &1. Correct the query ( AGS_EJR_MESSAGE 600 )
&1& ( AGS_EJR_MESSAGE 810 )
&1&&2& ( AGS_EJR_MESSAGE 811 )
&1&&2&&3& ( AGS_EJR_MESSAGE 812 )
&1&&3&&3&&4& ( AGS_EJR_MESSAGE 813 )
No non-final status job (e.g. released) for deletion ( AGS_EJR_MESSAGE_EN 035 )
Delete job failed because there are several subsequent jobs ( AGS_EJR_MESSAGE_EN 036 )
Solution &1 is not MAI based, can't be used for unified monitoring ( AGS_EJR_MESSAGE_EN 041 )
Solution &1 is MAI based, can only be used for unified monitoring ( AGS_EJR_MESSAGE_EN 042 )
Please specify an IBase Component that correspond to the managed system. ( AGS_EJR_REPORTING 003 )
No proper RFC destination to managed system could be found ( AGS_EJR_REPORTING 014 )
The item to be added already exists. ( AGS_EJR_SETUP 012 )
This guided procedure is already nested! No further nesting is possible! ( AGS_GPM 015 )
Only read-only mode is available ( AGS_GPM 044 )
Enhancement &3 cannot be activated (see long text) ( AGS_LICENCE 010 )
You are not authorized to enter the licence key ( AGS_LICENCE 015 )
License data query for system: &1 (customer number: &3) ( AGS_MK_MESSAGES 003 )
Data saved by system: &1 (customer number: &3) ( AGS_MK_MESSAGES 004 )
Error saving data of system: &1 (customer number: &3) ( AGS_MK_MESSAGES 005 )
License data collection errors (customer number: &1) ( AGS_MK_MESSAGES 007 )
Error saving license data in database (customer number: &2) ( AGS_MK_MESSAGES 009 )
Configuration entry not found ( AGS_MK_MESSAGES 010 )
No system data (customer number: &1) ( AGS_MK_MESSAGES 011 )
System &1 (&2) calls license data. No data in SolMan ( AGS_MK_MESSAGES 012 )
System &1 (&2) calls license data. Data returned ( AGS_MK_MESSAGES 013 )
Automatic distribution of license data deactivated ( AGS_MK_MESSAGES 015 )
Error saving from unknown system in buffer ( AGS_MK_MESSAGES 018 )
System &1 not relevant for license data query (customer number: &2) ( AGS_MK_MESSAGES 019 )
License data for customer number &1 can or need not be collected ( AGS_MK_MESSAGES 022 )
No license data in Solution Manager for system &1 ( AGS_MK_MESSAGES 024 )
There is not license data for all selected systems ( AGS_MK_MESSAGES 026 )
Errors in one or more license files ( AGS_MK_MESSAGES 028 )
No SW component info in SMSY for system &1 (customer number: &2) ( AGS_MK_MESSAGES 029 )
System &1 not in system landscape (SMSY) (customer number: &2) ( AGS_MK_MESSAGES 030 )
No authorization for authorization object S_TABU_RFC: ACTVT FIELD 03 ( AGS_MK_MESSAGES 031 )
Exception ERROR: Call in module /SDF/SLIC_READ_LICENSES ( AGS_MK_MESSAGES 032 )
Unknown error: Call in module /SDF/SLIC_READ_LICENSES ( AGS_MK_MESSAGES 033 )
&1 &2 &3 &4 ( AGS_MOPZ_PLAN_MSG 001 )
No system is chosen. ( AGS_MOPZ_PLAN_MSG 003 )
Landscape Verification of &1 was not successfull ( AGS_MOPZ_PLAN_MSG 005 )
Landscape Verification of &1 was not executed ( AGS_MOPZ_PLAN_MSG 006 )
There is no leading product version assigned for product system &1. ( AGS_MOPZ_PLAN_MSG 011 )
Database host of &1 technical system &2 is empty. ( AGS_MOPZ_PLAN_MSG 021 )
There is no product system using &1 technical system &2. ( AGS_MOPZ_PLAN_MSG 026 )
Maintenance relevant product version not assigned to product system &1. ( AGS_MOPZ_PLAN_MSG 027 )
Technical system(s) of product system &1 not found. ( AGS_MOPZ_PLAN_MSG 028 )
There is no self-update stack delta XML generated for SLM logistic tools. ( AGS_MOPZ_PLAN_MSG 032 )
Cross-system stack XML ( AGS_MOPZ_PLAN_MSG 037 )
Cross-system stack file ( AGS_MOPZ_PLAN_MSG 038 )
Package download XML ( AGS_MOPZ_PLAN_MSG 039 )
SLM tools self-update XML ( AGS_MOPZ_PLAN_MSG 040 )
Managed system update XML ( AGS_MOPZ_PLAN_MSG 041 )
No download URL for file &1; it's not put into the download XML for SLM. ( AGS_MOPZ_PLAN_MSG 063 )
No file size for file &1; it's not put into the download XML for SLM. ( AGS_MOPZ_PLAN_MSG 064 )
Merging free-selected files into download XML done with error or warning. ( AGS_MOPZ_PLAN_MSG 066 )
Database host not found and substituted for system &1 in the stack XML. ( AGS_MOPZ_PLAN_MSG 067 )
Splitting managed system specific stack XMLs done with error or warning. ( AGS_MOPZ_PLAN_MSG 069 )
The instance &1 (number: &2) of &3 is ignored. ( AGS_MOPZ_PLAN_MSG 073 )
Component version PPMS number for component &1 not found in SMSY. ( AGS_MOPZ_PLAN_MSG 099 )
Component &1 is not put into the system constellation(s). ( AGS_MOPZ_PLAN_MSG 100 )
The landscape pattern of system &1 is DEFAULT. ( AGS_MOPZ_PLAN_MSG 121 )
&1 missing in SMSY for an application server instance of system &2. ( AGS_MOPZ_PLAN_MSG 122 )
Not able to find the SLM managing system &1 in SMSY. ( AGS_MOPZ_PLAN_MSG 123 )
Application server instances not configured for technical system &1. ( AGS_MOPZ_PLAN_MSG 125 )
Not able to find an active SLM for selected managed systems. ( AGS_MOPZ_PLAN_MSG 126 )
Component &1 has different versions or SPs for system entries &2 and &3. ( AGS_MOPZ_PLAN_MSG 127 )
Not able to get the installed business function on &1 system &2. ( AGS_MOPZ_PLAN_MSG 128 )
Not able to get the installed business function on &1 system &2. ( AGS_MOPZ_PLAN_MSG 129 )
Not able to get the system license number of system &1. ( AGS_MOPZ_PLAN_MSG 130 )
Not able to get the S-user configured in SLM of system &1. ( AGS_MOPZ_PLAN_MSG 131 )
Not able to get the SLM managing system of selected systems. ( AGS_MOPZ_PLAN_MSG 147 )
Not able to get the self-update XML for SLM. ( AGS_MOPZ_PLAN_MSG 151 )
Not able to get the download XML for SLM. ( AGS_MOPZ_PLAN_MSG 152 )
&1 deployment for managed system &2 is not supported by SLM. ( AGS_MOPZ_PLAN_MSG 191 )
&1 on &2: SLM plan &3 is not deleted properly on SLM side. ( AGS_MOPZ_PLAN_MSG 194 )
Technical system &1-&2 is not configured for deployment in SLM. ( AGS_MOPZ_PLAN_MSG 195 )
The target JSPM of technical systems is lower than release 700 SP21. ( AGS_MOPZ_PLAN_MSG 196 )
The maintenance procedure is updating its own Solution Manager system. ( AGS_MOPZ_PLAN_MSG 197 )
The maintenance procedure is updating the system of SLM. ( AGS_MOPZ_PLAN_MSG 198 )
Requirements not met for Technical Usage & ( AGS_MOPZ_PLAN_MSG 202 )
Technical Usage &1 belongs to Project Selection ( AGS_MOPZ_PLAN_MSG 203 )
Too many results returned; please add more query criteria. ( AGS_MOPZ_PLAN_MSG 252 )
The requests &1&2&3&4 can't be released. ( AGS_MOPZ_TRACK_MSG 029 )
The information about the SAPserv router is missing for router &1 ( AGS_ROUTTAB_CONTROL 003 )
You do not have authorization to display the file &1. ( AGS_ROUTTAB_CONTROL 006 )
You do not have authorization to change the file &1. ( AGS_ROUTTAB_CONTROL 007 )
The automatic update of Router &1 is deactivated. ( AGS_ROUTTAB_CONTROL 018 )
Update changes of route permission table to SAProuter &1 (saprouter -n) ( AGS_ROUTTAB_CONTROL 039 )
The field "&1" of the SAProuter "&4" has been changed. ( AGS_ROUTTAB_CONTROL 040 )
The document is being processed in ext. ServiceDesk. No changes possible! ( AGS_SD_ADAPTER 001 )
Error during processing in SAP back end system (see long text) ( AGS_SERVICE_DELIVERY 008 )
Editing not possible. Some issues in process by &1. ( AGS_SERVICE_DELIVERY 039 )
Editing not possible. Some top issues in process by &1. ( AGS_SERVICE_DELIVERY 040 )
Editing not possible. Some tasks in process by &1. ( AGS_SERVICE_DELIVERY 041 )
Some issues in process by &1. ( AGS_SERVICE_DELIVERY 042 )
Some top issues in process by &1. ( AGS_SERVICE_DELIVERY 043 )
Some tasks in process by &1. ( AGS_SERVICE_DELIVERY 044 )
At least one parameter is required ( AGS_SISE_ERROR 003 )
Please enter a Test Script which uses External Test Tool ( AGS_SMT_GUI 027 )
Default settings are not defined ( AGS_SMT_SMSY 024 )
The system role &1 is not for testing on the project/solution &2 ( AGS_SMT_SMSY 025 )
The current role cannot be used for testing ( AGS_SMT_SOLAR 001 )
No test script assigned to the test configuration ( AGS_SMT_TCE 027 )
Asynchronous creation launched in Test Composition Environment ( AGS_SMT_TCE 157 )
The executable of type WD application &1 does not exist (check prefix) ( AGS_SMT_TCE 162 )
Usage &1 is currently not possible for this parameter ( AGS_SMT_TCE 166 )
You have chosen a test tool with predefined requirements ( AGS_SMT_TCE 205 )
Remove of message assignment not possible ( AGS_SMT_TIU 009 )
Test case was reported as damaged by a tester. Assignment will be lost. ( AGS_SMT_TIU 019 )
System role &1 is not marked for testing ( AGS_SMT_TWB_ATTR 007 )
Test plan timeframe incompatible with test package timeframe ( AGS_SMT_TWB_ATTR 012 )
The calculated effort exceeds the maximum value supported ( AGS_SMT_TWB_ATTR 014 )
The aggregated test plan effort exceeds the maximum value supported ( AGS_SMT_TWB_ATTR 023 )
The aggregated test package effort exceeds the maximum value supported ( AGS_SMT_TWB_ATTR 024 )
No Support Studio URL ( AGS_SREQ_INTERFACE 000 )
No Support Studio client ( AGS_SREQ_INTERFACE 001 )
Execute only one recording per system/client at a time ( AGS_TBWI 044 )
Transaction &1 can only be maintained from TBOM Recording Inbox ( AGS_TBWI 100 )
Preceding Q-Gate &1 of system role &2 (&3:&4) not passed ( AGS_TD 024 )
A problem occurred when releasing a transport request. ( AGS_TD 050 )
Cannot change the status of change &1 ( AGS_TD 057 )
Phase shift failed for &1; Change Request Management cycle is not created ( AGS_TD 070 )
Could not configure transport tracks for this project ( AGS_TD 092 )
Configuration of project &1 was saved with warnings ( AGS_TD 093 )
Could not configure CTS projects for this project ( AGS_TD 094 )
*** Message for tracks and CTS *** (no translation) ( AGS_TD 100 )
No domain controller found for &1 ( AGS_TD 102 )
Solution Manager project and Q-Gate Management project & are inconsistent ( AGS_TD 111 )
No system landscape defined for project &1 ( AGS_TD 118 )
Internal error calculating transport track for development system & ( AGS_TD 125 )
No transport track was generated for project & ( AGS_TD 127 )
Failed to configure CTS projects for project &1 ( AGS_TD 138 )
CTS projects for project &1 could not be released and decoupled ( AGS_TD 167 )
Invalid target system &1(&2) ( AGS_TD 170 )
Error when creating a transport request ( AGS_TD 171 )
Failed to create CTS project in system &1 ( AGS_TD 172 )
IMG project creation error with logical component &3 in DEV system &4 ( AGS_TD 177 )
Error with project configuration, check application log for more details ( AGS_TD 195 )
Project landscape is displayed without transport routes ( AGS_TD 201 )
System landscape diagram is not available for current project ( AGS_TD 203 )
System landscape diagram is only available in Web Browser ( AGS_TD 204 )
System landscape diagram is displayed incompletely for current project ( AGS_TD 205 )
Project &1 is not active for transport methods ( AGS_TD 208 )
Not all selected transport requests are released successfully ( AGS_TD 216 )
Project cycle not found. Cannot display transport landscape for project & ( AGS_TD 217 )
Document downloading only works in a Web browser ( AGS_TD 221 )
System role "&" is not defined for project & in project administration ( AGS_TD 241 )
Role type "&" of system role "&" is changed to "&" after track generation ( AGS_TD 242 )
*** Message for project configuration *** (no translation) ( AGS_TD 249 )
Landscape definition is empty for Logical Component &1 ( AGS_TD 251 )
Internal error calculating follow-up for Logical Component &1 ( AGS_TD 252 )
Following system is invalid for system &1 client &2 ( AGS_TD 254 )
SID configuration error for system &1. System &1 cannot be included ( AGS_TD 262 )
Development systems &1 and &2 have the same system ID & in project &3 ( AGS_TD 264 )
No transport route found between system & and & in logical component & ( AGS_TD 265 )
Error with domain controller of system &1 in logical component &2 ( AGS_TD 267 )
Error with domain controller of system &1 in project &2 ( AGS_TD 268 )
Transport tracks between QGM and ChaRM for project &1 are inconsistent ( AGS_TD 276 )
System role order of system &1 and &2 not according to TMS configuration ( AGS_TD 279 )
No change GUID &1 for project &2 (internal error) ( AGS_TD 288 )
Failed to find Function Module TMW_IMPORT_REQUESTS in remote system &1 ( AGS_TD 292 )
Project & already used in Quality Gate Management ( AGS_TD 303 )
The QGM project & is currently locked; it cannot be used for QGM ( AGS_TD 309 )
TMS check not successful for project &1. The function is not allowed ( AGS_TD 314 )
Phase shift rejected; it's only allowed in Quality Gate Management ( AGS_TD 401 )
Phase shift from &1 to &2 not possible ( AGS_TD 402 )
No active Quality Gate in Quality Gate Management ( AGS_TD 403 )
Phase Controller: Quality Gate Management rejected phase shifting ( AGS_TD 407 )
Q-Gate &1 not available in Q-Gate model. Check customizing for Q-Gates ( AGS_TD 411 )
Phase Controller: Quality Gate Management not known as cooperator ( AGS_TD 413 )
Pass Q-Gate "Deploy to Scope" before creating a new Maintenance Cycle ( AGS_TD 419 )
Phase Controller: Phase shift only possible in Change Request Management ( AGS_TD 424 )
Unable to get the SID of system &1 in "&2" due to configuration issue ( AGS_TD 504 )
System role order is inconsistent with the transport track of project &1 ( AGS_TD 506 )
System &1 &2 removed. It is still used in active QGM project &3 ( AGS_TD 512 )
System & (role "&") is not in transport track of active QGM project & ( AGS_TD 513 )
Relevant logical component & is not included in QGM configuration ( AGS_TD 541 )
No exporting system for system &1 in project &2 ( AGS_TD 545 )
QGM is not registered in ChaRM phase controller. Cannot activate QGM ( AGS_TD 582 )
Logical component & defined in project administration not included in QGM ( AGS_TD 585 )
Task list & of project & has not yet been released. Cannot activate QGM ( AGS_TD 587 )
No Quality Gate has yet been assigned to system role "&1" ( AGS_TD 589 )
Planned start date for Q-Gate "&1" is later than the date for Q-Gate "&2" ( AGS_TD 590 )
System role "&1" has a Q-Gate assignment to "&2" which is not a Q-Gate ( AGS_TD 591 )
System role "&1" has a Q-Gate assignment to "&2" which does not exist ( AGS_TD 592 )
TMS check failed ( AGS_TD 611 )
Failed to reassign request &1 from &2 to &3 ( AGS_TD 623 )
Transport of Copies (&1) created for request &2 in management system ( AGS_TD 627 )
Transport requests are reassigned successfully ( AGS_TD 631 )
Not all requests are available for creating Transport of Copies ( AGS_TD 636 )
Transport of copies are created successfully ( AGS_TD 638 )
No transport of copies can be created in non-ABAP systems &1 ( AGS_TD 642 )
Transport of copies cannot be created for transport request &1 ( AGS_TD 645 )
Failed to decouple transport request &1 from project &2, change &3 ( AGS_TD 649 )
Decouple transport request ( AGS_TD 655 )
Transport request &1 has not been imported to &2 ( AGS_TD 658 )
Unable to finish change &1 due to non-imported transport requests ( AGS_TD 663 )
Unable to finish Change &1 due to open TRs exists ( AGS_TD 671 )
Not all Tansport of Copies in change &1 have reached their target systems ( AGS_TD 673 )
Unable to withdraw change &1. ( AGS_TD 674 )
Do you want to decouple the selected transport requests? ( AGS_TD 675 )
Import to some target systems were completed with warning ( AGS_TD 677 )
Import to some target systems were completed with error ( AGS_TD 678 )
Unable to change transport request &1 in system &2 ( AGS_TD 682 )
Solution Manager Project &1 has no active CTS project for system &2 ( AGS_TD 688 )
Failed to schedule import job '&1' (see application log) ( AGS_TD 690 )
Variant '&1' is invalid for import job ( AGS_TD 691 )
&1 import job(s) were successfully scheduled; &2 job(s) were failed ( AGS_TD 698 )
Q-Gate assignment does not match the project configuration ( AGS_TD 716 )
Date of milestone "&1" is earlier than the date of active Q-Gate "&2" ( AGS_TD 717 )
Milestone "&1" earlier than the date of active Q-Gate "&2" is changed ( AGS_TD 718 )
Production systems are not in the "Deploy" phase ( AGS_TD 722 )
Active Quality Gate "&1" has changed; this is not allowed ( AGS_TD 724 )
Changing the quality manager will reset statuses of active Q-gate ( AGS_TD 730 )
Changing the QAB will lead to reset statuses of active Q-gate ( AGS_TD 731 )
Transport request in &1 cannot be deleted due to missing function modules ( AGS_TD 732 )
Project &1 was assigned Task List variant &2 that is not supported by QGM ( AGS_TD 740 )
Finish QGM phase "&1" before creating new ChaRM maintenance cycle for &2 ( AGS_TD 741 )
QGM project cycle not found. Check the configuration of project &1 ( AGS_TD 752 )
Project & is also active for QGM. Close the current QGM cycle first ( AGS_TD 755 )
Maintenance cycle &1 contains open transport requests ( AGS_TD 756 )
Maintenance cycle &1 contains non-imported transport requests ( AGS_TD 757 )
Maintenance cycle &1 contains open changes ( AGS_TD 758 )
Maintenance cycle switched from &1 to &2; (project &3) ( AGS_TD 759 )
Not all open transport requests were decoupled during cycle switch ( AGS_TD 760 )
Check for switching maintenance cycle &1 failed ( AGS_TD 761 )
Failed to refresh status of transport requests in project &1 ( AGS_TD 762 )
Failed to refresh CTS attribute (project &1) ( AGS_TD 765 )
Maintenance cycle &1 closed ( AGS_TD 770 )
Unable to switch cycle of project &1 due to incorrect ChaRM phase "&2" ( AGS_TD 771 )
Unable to close project &1 due to open QGM changes ( AGS_TD 773 )
Failed to switch maintenance cycle of project &1 ( AGS_TD 774 )
Maintenance cycle &1 contains non-imported transports of copies ( AGS_TD 775 )
Not all CTS projects were released for project &1 during cycle switch ( AGS_TD 776 )
Failed to create CTS projects for project &1 during cycle switch ( AGS_TD 777 )
Unable to reassign change &1 due to unchangeable transport requests ( AGS_TD 780 )
Unable to reassign change &1 to project &2 due to lacking of system &4/&3 ( AGS_TD 781 )
There are no transport requests available for importing ( AGS_TD 785 )
Change &1 and its transport requests are reassigned from project &2 to &3 ( AGS_TD 793 )
Unable to close project &1 since task list in ChaRM is still open ( AGS_TD 794 )
Transport request &1 is not changeable therefore can't be reassigned ( AGS_TD 796 )
Not all transport requests can be reassigned ( AGS_TD 797 )
Unchangeable transport request &1 cannot be decoupled ( AGS_TD 798 )
There are some transport requsts in status "Release Started" ( AGS_TD 799 )
Transport request &1 is not changeable, so it cannot be decoupled ( AGS_TD 814 )
Transport of copies can not be created for request &1 ( AGS_TD 815 )
Not all selected transport requests are released ( AGS_TD 823 )
Import failed due to invalid component version ( AGS_TD 824 )
Unable to reassign change &1 due to non-imported transport of copies ( AGS_TD 825 )
Current cycle has transport requests; you cannot change cCTS settings ( AGS_TD 847 )
Cluster is inconsistent. Assign a cluster that has been used ( AGS_TD 850 )
SAP recommends to set up one cCTS cluster for all systems (&1&2&3&4) ( AGS_TD 851 )
SAP recommends to assign cCTS cluster (&1) for systems (&2&3&4) ( AGS_TD 852 )
Project &1 was activated for QGM; this function is not allowed. ( AGS_TD 873 )
This operation is disabled during the Scope Phase ( AGS_TD 877 )
cCTS cluster configuration cannot support the landscape in project &1 ( AGS_TD 878 )
Default Central CTS (cCTS) clusters are assigned for project &1 ( AGS_TD 879 )
Central CTS (cCTS) cluster assignment is incorrect for project &1 ( AGS_TD 881 )
Central CTS (cCTS) cluster assignment is not set for system &1 ( AGS_TD 883 )
No Central CTS (cCTS) cluster containing system (&1:&2) is found ( AGS_TD 884 )
The target project is restricted during the Scope Phase ( AGS_TD 887 )
Landscape changed in project &1 ( AGS_TD 895 )
No logical component in the current landscape ( AGS_UDA_PROJ_MSG 001 )
The target logical component "&1" does not have a planned product version ( AGS_UDA_PROJ_MSG 012 )
The current interface connection cannot be evaluated ( AGS_UDA_PROJ_MSG 014 )
No interface connection for logical component '&1' ( AGS_UDA_PROJ_MSG 016 )
No interface connection for the selected logical components ( AGS_UDA_PROJ_MSG 018 )
Logical Component &1 is assigned to another instance (&2 vs. &3) ( AGS_UDA_PROJ_MSG 101 )
Logical Component &1 is assigned to another Product Version ( AGS_UDA_PROJ_MSG 102 )
Logical component &1 is invalid ( AGS_UDA_PROJ_MSG 103 )
Logical Component &1 is already assigned to other Product Version ( AGS_UDA_PROJ_MSG 104 )
Logical Component &1 is already assigned to other Product Instance ( AGS_UDA_PROJ_MSG 105 )
Logical component &1 has a different target version in system &2 ( AGS_UDA_PROJ_MSG 106 )
Invalid Production or Production Version in System &1 ( AGS_UDA_PROJ_MSG 121 )
Product Version Instance is initial &1 &2 ( AGS_UDA_PROJ_MSG 122 )
Product Version is not a successor ( AGS_UDA_PROJ_MSG 123 )
Operand &1 is still used ( AH 007 )
Dependent entries in table &1 &2 &3 &4 ( AH 008 )
Temperature value not in positive range ( AH 012 )
Air pressure not between &1 and &2 ( AH 013 )
Enter unit of measurement ( AH 014 )
Quantity issued is zero ( AH 015 )
Units of measurement within calorific value district &1 do not match ( AH 016 )
Units of measurement match for each calorific value district ( AH 017 )
Volume correction factor is zero ( AH 020 )
From-measured pressure is zero ( AH 021 )
&1 is zero ( AH 028 )
&1 is not between &2 and &3 ( AH 029 )
Measured pressure &1 is greater than maximum value &2 ( AH 030 )
Choose a default value for billing class &1 ( AH 031 )
Several default values chosen for billing class &1 ( AH 032 )
Gas law deviation factor &1 is not between &2 and &3 ( AH 034 )
Gas temperature &1 is rounded to exactly 0.5 ( AH 035 )
Deviation &1 is greater than &2 ( AH 042 )
Measured pressure &1 not in table &2 ( AH 048 )
Enter a to-date that is after the last entry ( AH 052 )
Enter a to-date that is after the from-date ( AH 054 )
Enter rate type, rate category and rate ( AH 056 )
Error occurred during transfer of facts for installation &1 ( AH 057 )
Not possible to transfer facts for operand category &v1& ( AH 059 )
Not permissible to set the "No prorat." indicator ( AH 060 )
Div. cat. &1 of div. &2 does not match div. cat. &3 of price class &4 ( AH 064 )
Enter a valid combination of control indicators ( AH 065 )
Position cursor on the line you wish to delete ( AH 067 )
Delete all values before you specify a replacement value ( AH 072 )
Measured pressure &1 is larger than permitted maximum value &2 ( AH 073 )
No entries for billing class &1 in table &2 ( AH 075 )
Gas procedure &1 not in table &2 ( AH 076 )
Only enter air pressure (corr.) if thermal gas billing = 00 or 01 ( AH 078 )
Only enter averaging type/avg from/fixed temp.if thermal gas billing = 00 ( AH 079 )
Enter either fixed temperature or averaging type/average from ( AH 080 )
Enter all rounding attributes ( AH 082 )
You have already specified a replacement value for the operand ( AH 086 )
Values already exist for operand &1 (season &2) ( AH 087 )
Operand &1 is not of category &2 ( AH 089 )
General control indicators are partially ignored in special procedure ( AH 092 )
Gas law deviation factor 01 only possible for temp./pressure billing ( AH 093 )
Maintain temperature component ( AH 094 )
Special proc. "no temperature" only necessary for thermal gas billing 00 ( AH 095 )
Specify either number of outsortings or permanent outsorting ( AH 096 )
Maintain an operand value for operand &1 ( AH 099 )
Value of command &1 (ARCR &2) greater than first value ( &3 ) ( AH 101 )
Value of command &1 (ARCR &2) greater than value in operation mode & (&) ( AH 102 )
Reference value can only be limited (on &) ( AH 103 )
Should later time slices be maintained first? ( AH 107 )
Maintain entry ( AH 110 )
Calorific values to be billed are outside of normal limits ( AH 111 )
Franchise fee price is only possible for quantity-based price operands ( AH 113 )
Calorific value &1 is not between &2 and &3 ( AH 114 )
No calorific value in table &1 for period &2 ( AH 115 )
Supplier calorific value date &1 in table &2 is zero ( AH 116 )
Company calorific value date &1 in table &2 is zero ( AH 117 )
No register use possible in reference base &1 ( AH 119 )
Franch. fee prices w. start value can only be maintained in inst. facts ( AH 121 )
Enter only one value for date &1 ( AH 122 )
Enter only one value for the period &1 to &2 ( AH 123 )
Internal: to-date in same from-date group inconsistent ( AH 132 )
Indicator 'ignore consumption' for date &1 not transferred ( AH 133 )
Internal: to-date of the most current record is missing ( AH 136 )
Internal: to-date <> from-date of previous record - 1 day ( AH 137 )
You are not permitted to maintain operands of category &1 in the &2 ( AH 140 )
You are not permitted to specify a season for operands of category &1 ( AH 141 )
Internal error in determining possible entries (&1, &2) ( AH 158 )
Error in user exit &1 ( AH 162 )
Historical data will be lost ( AH 163 )
Enter a time basis smaller than or equal to &1 ( AH 166 )
Complete your entry ( AH 167 )
Possible entries (F4 help) for price only possible for price category 3 ( AH 175 )
Price &1 does not exist as price class in TE431 ( AH 177 )
Price level &1 not in table TE471 ( AH 178 )
From-nominal load is zero ( AH 184 )
To-nominal load is zero ( AH 185 )
From-measured pressure is zero ( AH 186 )
To-measured pressure is zero ( AH 187 )
Internal: error occurred during import of meter reading results to &1 ( AH 190 )
Rate fact group &1 for rate &2 already exists ( AH 196 )
Table &3 for meter reading document number &2 inconsistent ( AH 197 )
Internal: error accessing table &1 ( AH 207 )
No inconsistencies found in rate check ( AH 211 )
Operand &1 is of category &2 instead of &3 ( AH 212 )
Meter reading document number &1 not found in table &2 ( AH 215 )
Operand &1 has division &2 instead of &3 ( AH 216 )
Enter a valid discount for the period ( AH 217 )
Enter a valid price for the period ( AH 218 )
Position cursor on an operand ( AH 219 )
Do not create overlapping time slices ( AH 220 )
Control parameter &1 of variant &2 is invalid ( AH 222 )
Select one line only ( AH 223 )
Enter a from-date from &1 ( AH 225 )
Enter a to-date from &1 ( AH 226 )
Enter an operand from the DEMAND or QUANT category ( AH 227 )
Register-related data in the rate header is incomplete ( AH 228 )
Create operand values for operand &1 ( AH 229 )
Register operand &1 does not have a weighting key ( AH 231 )
Internal: error accessing table &1 in form &2 ( AH 232 )
Register operand &1 is not used in a step ( AH 233 )
Maintain operand values for operand &1 ( AH 234 )
No sub-transactions are required for variant &1 ( AH 235 )
Specify sub-transactions for variant &1 ( AH 236 )
Before saving ensure that rate category facts are consistent ( AH 237 )
Document line type &1 cannot be used in rate ( AH 240 )
Previous document number &1: scheduled meter reading date is missing ( AH 241 )
Internal: contract &1 sched. billing date &2: sched. MR date is missing ( AH 242 )
Internal: contract &1 sched. billing date &2: too many docs in table &3 ( AH 243 )
Rate &1 has an unsuitable division ( AH 244 )
Rate &1 has an unsuitable billing class ( AH 245 )
Rate &1 has no rate steps ( AH 246 )
Select the appropriate lines to be moved ( AH 249 )
User &1 is blocking rate &2 from schema &3 ( AH 250 )
Currency required for absolute amount discounts and price discounts ( AH 252 )
Enter a rate category from division &1 as the reference ( AH 255 )
Settings are consistent ( AH 264 )
Internal: field &1 from the contract is not filled ( AH 266 )
Field &1 from the billing order is not filled ( AH 267 )
Entry has been made in field &1 ( AH 268 )
Internal: error has occurred reading partner for contract &1 ( AH 270 )
Reference value type &1 does not exist ( AH 271 )
Specify a rate fact group for rate type &1 ( AH 274 )
Only specify one rate fact group for one rate type ( AH 275 )
Internal: field &1 from the installation is not filled ( AH 276 )
Field &1 from the rate category is not filled ( AH 277 )
Enter a rate type to be used for rate determination ( AH 278 )
Field &1 not filled in billing ( AH 279 )
No period documents were found for period-end billing ( AH 280 )
Contract &1 sched. bill. date &2: BEGNACH for PE billing order is missing ( AH 281 )
Internal: No data exists for installation &1 on &2 ( AH 283 )
Contract &1 scheduled billing date &2: no period documents found ( AH 284 )
Entry for document type &1 is missing from table TE667 ( AH 285 )
No rate determination possible with rate category &1 ( AH 286 )
Document type &1 is not in table TE093 ( AH 287 )
To move the rate, select appropriate lines ( AH 288 )
Billing order deleted for contract &1 with scheduled billing date &2 ( AH 289 )
Schema &1: rate step for schema step &2 missing ( AH 290 )
Billing document &1 was already updated with invoicing document &2 ( AH 292 )
Internal: billing doc. &1 -> inconsistency due to field INTOPBEL &2 ( AH 293 )
Internal: billing document &1 -> inconsistent invoicing document &2 ( AH 294 )
Counter-document &1 (for &2) cannot be reversed ( AH 298 )
Internal: no installation data exists ( AH 299 )
ERCH doc. no. &1 inv. doc. no. &2: INTBELNR &3 does not match INTBELNR &4 ( AH 301 )
No rate category data exists ( AH 302 )
ERCH doc. no. &1 ERDK doc. no. &2: STOKZ not set ( AH 303 )
ERDK doc.no. &1 and ERDK offsett.doc.no. &2 inconsistent due to doc.no.&3 ( AH 304 )
ERDK counter-document &1 (for &2): STOKZ must not be set ( AH 305 )
Invoicing doc. &1: STBEL &2 does not match INTOPBEL &3 (for &4) ( AH 306 )
Billing for contract &1 completed with document no. &2 ( AH 308 )
Invoicing offsetting doc. &1 (for &2) has wrong BLART &3 (instead of ST) ( AH 309 )
Invoicing document &1: incorrect FKKOP-OPBEL &2 ( AH 310 )
Invoicing document &1: FKKOP-AUGBL &2 (instead of &3) ( AH 311 )
Invoicing document &1: FKKOP-AUGRD &2 (instead of 05) ( AH 312 )
Invoicing document &1: no entries found in FKKOP ( AH 313 )
Statistical rate &1 has division &2 and billing class &3 ( AH 314 )
Statistical rate is not required for variant &1 ( AH 315 )
The statistical rate has the same rate number ( AH 316 )
Main transactions for billing are not fully maintained ( AH 319 )
For ENDIF variant in step &1 there is no corresponding IF variant ( AH 321 )
Document &1 has simulation indicator &2 ( AH 322 )
ELSE variant in step &1 is invalid ( AH 323 )
There are &1 IF variants and &2 ENDIF variants ( AH 324 )
Schema &1 does not contain complete rate &2 ( AH 325 )
Doc. no. &1 / &2 (no period-end billing although ENDABRPE is the same) ( AH 326 )
Please do not set steps without input operands to optional ( AH 327 )
Variant &1 is not permissible for rate &2 ( AH 328 )
Period control is missing in step &2 for variant &1 ( AH 329 )
Doc. &1 has more recent PE bill. per. &2 than doc. &3 (PE bill. per. &4) ( AH 330 )
Billing doc. &1 cannot be reversed because more recent docs exist ( AH 332 )
All steps for rate &1 are inactive ( AH 333 )
Document &1 with main transaction &2 cannot be reversed ( AH 335 )
Field &1 from accounts receivable and payable is not filled ( AH 339 )
Please specify a valid rate fact group for rate type &1 ( AH 340 )
Internal: inst. &1 sch.bill.date &2 bi.proc. &3: bi.order already exists ( AH 341 )
Internal: EITR entry for doc. no. &1 company code &2 no longer exists ( AH 342 )
Billing reversal of documnet no. &1 is cancelled ( AH 347 )
The facts are not consistent ( AH 348 )
Internal: more than one partner was found for contract &1: &2 partners ( AH 349 )
Internal: field &1 from the contract is not filled ( AH 350 )
Internal: inconsistency in file ERCHC ( AH 351 )
Price amount is zero (block maintenance may be necessary) ( AH 352 )
Price summary using indicator &1: different price categories ( AH 354 )
Price summary indicator &1 only used once ( AH 355 )
Internal: field &1 was not filled ( AH 356 )
When an average price is used no other price is possible ( AH 357 )
Cancellation period without cancellation time unit ( AH 362 )
No rate facts can be maintained for this rate ( AH 365 )
Blocks have already been maintained for this entry ( AH 366 )
Entry &1 &2 already exists for &3 ( AH 367 )
Internal: contract field is not filled ( AH 368 )
Internal: Contr. &1 TargBillDate &2 BillTrans. &3: Inconsist. BillDocs ( AH 369 )
Installation &1 scheduled billing date &2: inconsistent billing orders ( AH 370 )
Bill. order for inst. &1 sch.bill.date &2 bill.proc. &3 not in selection ( AH 371 )
Installation &1 date &2: Mulitple billing orders with status 2 ( AH 373 )
Inst. &1 sched. bill. date &2 bill. trans. &3: Inconsistent billing order ( AH 374 )
No billing orders that can be processed were selected ( AH 375 )
No contract exists for installation &1 ( AH 376 )
Contract &1: no entries in table &2 ( AH 378 )
The last schema change could not be canceled ( AH 379 )
Enter a valid value for the period ( AH 380 )
Date check: &1 &2 after &3 &4 ( AH 383 )
Inst. &1 scheduled bill. date &2 bill. procedure &3: status &4 incorrect ( AH 384 )
Installation &1: contract &2 must be billed first ( AH 385 )
Rate &1 updated; check indicators ( AH 386 )
Rate &1 is complete ( AH 387 )
It is not possible to delete block ( AH 389 )
In variant &1 an input operand is missing in step &2 ( AH 390 )
In variant &1 an output operand is missing in step &2 ( AH 391 )
In variant &1 a control parameter is missing in step &2 ( AH 392 )
Internal: log. reg. &1 equip. no. &2 reg. &3 date &4: no entry in IZWST ( AH 393 )
Log. reg. &1 equip. no. &2 reg. &3: different no. of predecimal places ( AH 395 )
Before making selection, position cursor on a discount ( AH 399 )
Before making selection, position cursor on a price ( AH 400 )
Specify valid-from date and franchise fee group ( AH 401 )
Position cursor on a line in the historic data ( AH 403 )
Position cursor on interval to be deleted ( AH 404 )
Position cursor on period to be copied ( AH 406 )
Select one line only ( AH 410 )
Rate &1 still allocated in rate determination to schema &2 ( AH 411 )
Price does not exist to &1, but to &2 ( AH 412 )
Price does not exist until &1 ( AH 413 )
Price has no time slices ( AH 414 )
Internal: facts were not checked ( AH 416 )
Discount/surcharge &1 is still used ( AH 417 )
Enter dates that do not overlap ( AH 418 )
Price &1, price category &2, price level &3 does not exist ( AH 419 )
Schema &1 contains no schema steps ( AH 420 )
Enter an address for streetlight &1 ( AH 422 )
Value is too large for operand update ( AH 424 )
Inconsistent definition of operand groups ( AH 425 )
To-date must not be changed ( AH 428 )
Operand value for date &1 must not be deleted ( AH 429 )
Operand value for date &1 must not be deleted ( AH 430 )
Enter a date starting from &1 ( AH 431 )
Internal: billing document &1 invoicing document &2: inconsistency ( AH 432 )
Internal: cont. &1 PE bill.per. &2 doc.no. &3 doc.no. &4: inconsistency ( AH 433 )
Non-invoiced document &1 before document &2 (invoice document &3) ( AH 434 )
IF-ELSE-ENDIF unit has different rates ( AH 436 )
IF variant found with incompatible validity period ( AH 437 )
Not possible to specify both equipment and address ( AH 438 )
Internal: program/FM &1: from-date &2 after to-date &3 ( AH 439 )
Cal. val. dist. &1 cal. val. proc. &2 date &3: no billing cal. value ( AH 440 )
Energy feeding volume from table &1 in period &2 - &3 is zero ( AH 442 )
These schema steps do not generate billing line items ( AH 445 )
In installation &1, there is a register without a rate type ( AH 447 )
Please enter a schema which belongs to billing class &1 ( AH 448 )
Values already exist for operand &1 in season &2 ( AH 449 )
Values already exist for operand &1 ( AH 450 )
The season periods are inconsistent ( AH 452 )
Please specify a valid date as season limit ( AH 456 )
Sub-transactions &1 in comp. code &2 div. &3 acct det. ID &4 inconsistent ( AH 457 )
Please specify the pre-sorting key &2 in schema step &1 ( AH 458 )
Output operand &1 is not unique ( AH 460 )
Enter the Required Data ( AH 461 )
Enter weighting key only for weighted calculation of average ( AH 462 )
Enter weighting key only for weighting according to TE415 ( AH 463 )
Enter weighting key or weighting/calorific value district ( AH 464 )
Weighting key &1 search criterion &2: period &3 - &4 not covered ( AH 465 )
Weighting key &1 division category &2: entry for date &3 not maintained ( AH 466 )
Weighting key &1 div. cat. &2 period &3-&4: energy feeding volume zero ( AH 467 )
Maintain weighting key for averaging type "weighted average" ( AH 468 )
Maintain weighting key for air pressure "weighted average" ( AH 469 )
Enter weighting key only for weighted calculation of average ( AH 470 )
The to-date for &1 has been adjusted ( AH 476 )
Enter a rate type ( AH 477 )
Inconsist. installation structure for device/register &1 from instln &2 ( AH 478 )
This change of logical register &1 not permitted ( AH 479 )
Enter a rate type to be used for determining a demand rate ( AH 482 )
Enter a rate type to be used for determining an energy rate ( AH 483 )
Enter a permissible rate type ( AH 484 )
Error updating table &1 ( AH 486 )
Enter a schema that corresponds to division &1 ( AH 487 )
Value &1 cannot be entered for &2 ( AH 488 )
Billing classes do not match ( AH 489 )
Units of measurement do not match ( AH 491 )
Reference bases do not match ( AH 492 )
Discount types do not match ( AH 493 )
Do not use register discount in the facts ( AH 494 )
Entry for date &1 already exists ( AH 495 )
No maintenance type defined for burning hour calendar from &1 to &2 ( AH 499 )
Not possible to copy because of change in maintenance type in year &1 ( AH 501 )
Maintenance types for years &1 and &2 do not match ( AH 502 )
Use only the first of the month as the from-date ( AH 504 )
Termination because runtime was exceeded ( AH 506 )
Enter a simulation period ( AH 508 )
Enter a to-date for the overall check ( AH 509 )
Enter &1 ( AH 510 )
Program &1 routine &2: Overflow of internal meters for MR doc. numbers ( AH 511 )
Display option not possible for the operand ( AH 512 )
Internal error reading the billing line items ( AH 513 )
Error during update of operand &1 ( AH 516 )
Indicator for flat-rate installation changed (routine &1) ( AH 517 )
Operand &1 updates in schema step with register data ( AH 518 )
Schema &1: no steps in period &2 to &3 ( AH 519 )
Enter rate types that result in the same weighting ( AH 520 )
Select an operand ( AH 521 )
Rate is not valid for registers; note the entry restrictions ( AH 524 )
Units of measurement do not match for operands &1 and &2 ( AH 528 )
Do not enter a +/- sign for values of zero ( AH 532 )
Interal: split error: &1 -> &2 - &3 in &4 ( AH 534 )
Internal: eq.no. &1 reg. &2 per. &3-&4: no entries in IZW (form THGAS_ZW) ( AH 540 )
Internal: function module &1 include/routine &2 table &3 empty ( AH 541 )
Device &1 register &2 period &3 - &4: calorific value district is missing ( AH 542 )
Internal: indicator &1 period &2 - &3 not found in &4 ( AH 543 )
Log. register &1 period &2 - &3 not found in &4 ( AH 544 )
CV district &1 CV proced. &2 date &3: billing calorific value is missing ( AH 546 )
CV procedure &1 CV district &2: billing calorific value is missing ( AH 547 )
CV dist. &1 CV proc. &2 <= date &3: billing calorific value is missing ( AH 548 )
Internal: field &1: value &2 (routine &3 program &4) not defined ( AH 549 )
Budget billing main transactions are not maintained completely ( AH 550 )
Divisions do not match ( AH 551 )
Air pressure area &1 <= date &2: air pressure missing in &3 ( AH 564 )
Volume corr. factor proc. &1: temp. fields not maintained completely ( AH 565 )
Not possible to maintain before &1 ( AH 571 )
Dev.&1 reg.&2 VCF proc.&3: not poss.to det. gas law dev.fact.- miss.temp. ( AH 574 )
Dev.&1 reg.&2 per.&3-&4: meas.press. missing for det. of GasLawDev.factor ( AH 575 )
Dev. &1 reg. &2 per. &3 - &4: temp. missing for det. of gas law dev.fact. ( AH 576 )
Values for operand &1 must not be deleted ( AH 578 )
Error in the automation data for operand &1 (season &2) ( AH 579 )
Dev. &1 reg. &2 per. &3-&4: GLDF(set) missg for determ. gas law dev.fact. ( AH 581 )
Device &1 reg. &2 period &3 - &4: no actual gas law deviation factor ( AH 583 )
Rate &1 step &2: sub-transactions not maintained completely ( AH 584 )
Device &1 reg. &2 VCF proc. &3: no fixed volume correction factor in &4 ( AH 587 )
Device &1 reg. &2 gas proc. &3 comparison &4: data inconsistency ( AH 588 )
Errors have occurred in rate determination ( AH 589 )
Not possible to maintain franchise tax category in average price ( AH 593 )
Rounding &1 is larger than &2 ( AH 595 )
Round. rules for Wobbe factor only req. for correcting gas law dev.factor ( AH 596 )
Bill. class &1 cal. value proc. &2 must match billing class &3 ( AH 597 )
Bill. class &1 vol. corr. factor proc. &2 must match billing class &3 ( AH 598 )
Billing class &1 does not match billing class &2 gas procedure &3 ( AH 599 )
Schema step &1 cannot be executed ( AH 602 )
Log. register &1 from &2 to &3: no entry in ITHG ( AH 603 )
Backbilling group &1 in step &2 is inconsistent ( AH 604 )
Maintain the 'execute backbilling' indicator in step &1 ( AH 605 )
Specify the length of the backbilling period ( AH 606 )
Specify the difference between periodic billing and period-end billing ( AH 607 )
Equip. no. &1 reg. &2 from &3 to &4: no entry in ITHG ( AH 608 )
(Device &1) equip. no. &2 reg. &3 key date &4: no entry in ITHG ( AH 609 )
Document &1 has already been released and can no longer be changed ( AH 611 )
Air pressure area &1 <= date &2: air pressure missing in &3 ( AH 612 )
Choose a valid billing line item as reference ( AH 616 )
Choose a different line item to delete ( AH 617 )
&1 tax line item(s) generated ( AH 618 )
Enter a to-date for the budget billing simulation ( AH 619 )
Gas date &1 default value &2: deviation of maximum &3 months ( AH 621 )
Default &1 is greater than permitted deviation &2 ( AH 623 )
&1 document line items were generated by automatic proration ( AH 624 )
Delete value &1 in field &2 ( AH 625 )
Select price category &1 ( AH 626 )
There is no secondary meter for the primary meter ( AH 627 )
Primary meter device &1 register &2 is its own secondary meter ( AH 628 )
There are two primary meters for secondary meter device &1 register &2 ( AH 629 )
Gas proc.&1: MUnit bef. conv.w. CV &2 uneq. to MUnit after conv.w. VCF &3 ( AH 630 )
Specify the length of the period-end billing period ( AH 631 )
Tax code could not be determined ( AH 632 )
External price &1 price cat. &2 price level &3: incorrect history table ( AH 633 )
CV dist. &1 CV proc. &2 <= date &3: billing calorific value is missing ( AH 634 )
Contract &1 not found in &2 ( AH 636 )
Temperature area &1 <= date &2: temperature missing in &3 ( AH 638 )
Temperature area &1 <= date &2: temperature missing in &3 ( AH 639 )
FM &1: Parameters &2 and &3 cannot be specified simultaneously ( AH 640 )
Device &1 register number &3 has no rate type on &4 ( AH 642 )
Price &1 price category &2 price level &3 in currency &4 already exists ( AH 643 )
Price &1 price category &2 price level &3: other currency &4 exists ( AH 644 )
Price &1 price category &2 price level &3 currency &4: history missing ( AH 645 )
Price &1 price category &2 price level &3: price type &4 is ignored ( AH 646 )
Price &1 price category &2 price level &3: currency &4 deleted ( AH 649 )
Franchise fee group &1 has billing class &2 instead of &3 ( AH 650 )
Price &1 price category &2 price level &3 currency &4: deletion error ( AH 651 )
FM &1: parameter &2 or &3 is required in order to delete ( AH 652 )
Device &1 register &2 has negative consumption deduction ( AH 653 )
No meter reading result exists on &3 for device &1 register &2 ( AH 654 )
Historical data is not taken into account ( AH 655 )
Update in price &1 not permitted ( AH 657 )
Operand &1 for updating price: inconsistent parameters ( AH 658 )
Specify a currency key ( AH 659 )
Manual credit memo/backbilling &1 cannot be reversed ( AH 660 )
Volume correction factor procedure &1 is not active ( AH 661 )
Calorific value procedure &1 is not active ( AH 662 )
Key date is missing for month-based billing ( AH 663 )
Key date is required for access control for operand &1 ( AH 665 )
No meter reading unit in table &1 for date &2 (include &3) ( AH 666 )
Not possible to determine alloc. date for meter reading unit &1 date &2 ( AH 667 )
Specify an average price that is calculated at runtime ( AH 668 )
Enter the replacement value "Runtime" ( AH 669 )
Only selection &2 is permissible for meter reading reason &1 ( AH 670 )
Sub-transaction &1 has a special meaning ( AH 671 )
Operand &1 does not belong to division &2 ( AH 672 )
Sub-transaction &1 has incorrect debit/credit indicator ( AH 673 )
Not permissible to maintain operand &1 in the installation facts ( AH 674 )
Not permissible to maintain operand &1 in the rate category facts ( AH 675 )
Avg. prices with starting val. can be maintained in the inst. facts only ( AH 676 )
Avg prices are possible only for time- and quantity-based price operands ( AH 677 )
Sub-transaction &1 does not exist in table TE305 for division &2 ( AH 678 )
Not permissible to maintain operand &1 in the rate facts ( AH 679 )
Device &1 reg. &2 (log. reg. &3): min. of &4 meter reading results reqd ( AH 680 )
You cannot change the currency for an amount already calculated ( AH 681 )
You are not permitted to specify a document number ( AH 682 )
Specify a value that has no more than &1 decimal places ( AH 683 )
Dev. &1 reg. &2 per. &3-&4: No MR result marking start of billing period ( AH 684 )
Dev. &1 reg. &2 per. &3-&4: No MR result marking end of billing period ( AH 685 )
Billing order selection contains no entries ( AH 686 )
Enter a franchise fee price that is calculated at runtime ( AH 687 )
Routine &1 include &2: parameter &3 not specified ( AH 689 )
Deviation of meter reading results: min. date &1 max. date &2 ( AH 690 )
Device &1 register &2 date &3: (periodic) meter reading result missing ( AH 691 )
Billing document &1: end of billing period is missing ( AH 692 )
Gas procedure &1 is not permitted ( AH 693 )
Gas procedure &1 vol. corr. factor proc. &2: fixed temp. key is missing ( AH 694 )
Gas procedure &1 vol. corr. factor proc. &2: temp. area is missing ( AH 695 )
Gas procedure &1 vol. corr. factor proc. &2: pressure area is missing ( AH 696 )
Gas proc. &1 vol. corr. factor proc. &2: altitude correct. press. is zero ( AH 697 )
Gas proc. &1 vol. corr. factor proc. &2: set gas law dev. factor is zero ( AH 698 )
Gas proc. &1 vol. corr. factor proc. &2: actual gas law dev.fact. is zero ( AH 699 )
Gas proc. &1 cal. value proc. &2: cal. value district is missing ( AH 700 )
Specify a price with suitable franchise category &1 ( AH 701 )
Do not enter a rate type ( AH 702 )
Inconsistent period control for operand &1 ( AH 703 )
Do not specify an original value for operand &1 ( AH 704 )
You are not permitted to use presort key &1 in the schema ( AH 705 )
Meter reading results are incorrect for the following devices/registers: ( AH 707 )
Device &1 register &2 scheduled meter reading date &3 ( AH 708 )
Period control and specification of billing period are inconsistent ( AH 710 )
Period control and specifications in the portion are inconsistent ( AH 711 )
Measured pressure &1 is not permissible ( AH 713 )
Dev. &1 reg. &2 date &3: move-in meter read. result missing or incorrect ( AH 714 )
Final billing has already been performed for contract &1 ( AH 719 )
Enter a valid date ( AH 720 )
Error in the automation data for operand &1 (season &2) ( AH 721 )
Before making selection, specify a from-date ( AH 722 )
No inconsistencies found in the sub-transactions ( AH 723 )
You must specify a currency for average prices with a start value ( AH 724 )
Internal: function module &1 was called in direct input ( AH 725 )
Rate step &1 variant &2: data entered in fields not ready for input ( AH 726 )
Installation &1 not found (access FM &2) ( AH 727 )
Installation &1 key date &2 not found (access FM &3) ( AH 728 )
Maintain the adding and the multiplying component ( AH 729 )
Installation &1 scheduled billing date &2: meter reading date &3 <> &4 ( AH 730 )
Billing document &1: outsorting with print document &2 ( AH 731 )
Billing document &1 print document &2: Ind1 &3 = Ind2 &4 ( AH 732 )
Document &1: no PE billing order with start of PE billing period &2 ( AH 734 )
Period control &1 not permitted for period-end billing ( AH 735 )
Outsorting in case of manual document &1: inconsistency ( AH 736 )
Specify either invoicing document number(s) or billing document number(s) ( AH 740 )
Document &1 is a simulation document ( AH 742 )
Document &1 has been outsorted ( AH 743 )
Invoicing doc. &1: no billing documents for adjustment reversal ( AH 744 )
Billing doc. &1 reversed for adjustment (comp. doc. &2) ( AH 745 )
Adjustment reversal not possible for manual billing &1 ( AH 746 )
Billing document &1 was reversed for adjustment (invoicing doc. &2) ( AH 747 )
Billing document &1 cannot be reversed for adjustment ( AH 748 )
Billing document &1 is not invoiced -> adjustment reversal not possible ( AH 749 )
Specify a schema that contains backbilling steps ( AH 750 )
Specify a schema that contains a period-end billing rate ( AH 751 )
Operand &1: control fields for demand are filled ( AH 752 )
Number of demand peaks is 0 for register operand &1 ( AH 753 )
Maximum line item &1 not equal to &2 (FM &3) ( AH 755 )
Register indicator is not set for operand &1 ( AH 756 )
Not possible to maintain facts for operand &1 ( AH 757 )
Document &1 cannot be reversed for adjustment due to document &2 ( AH 758 )
Operand &1 is a register operand ( AH 759 )
Doc. &1 -> doc. &2: inconsistent concatenation due to doc. &3 ( AH 760 )
Doc. &1 cannot be reversed (-> period-end bill. order with adj. reversal) ( AH 761 )
Doc. &4 is not indicated in table ERCHC as reversed for adjustment ( AH 762 )
Document &4 is not indicated in table ERCHC as invoiced ( AH 763 )
Doc. &4 has doc. number that refers to new billing despite billing order ( AH 764 )
Not possible to delete billing order because of document number &1 ( AH 765 )
Document &4 -> invoicing document &3 not reversed in invoicing ( AH 766 )
Operand &1 used for proration purposes only ( AH 767 )
Variant &2 updates to the installation facts ( AH 768 )
Doc. no. &4: billing order not marked w. doc. no. for adjustmt reversal ( AH 769 )
Variant &1 updates to the correction periods ( AH 770 )
Doc. no. &4 does not correspond to doc. no. &3 in billing order ( AH 771 )
Operand &1 is provided by a special update ( AH 772 )
Not possible to change the rate category ( AH 773 )
Deletion of doc. no. "adjustment reversal" from billing order: terminated ( AH 774 )
Not possible to change the rate category ( AH 778 )
Doc. &1 (inv.doc. &2) del. from bill.order for inst. &3 sch. bill.date &4 ( AH 779 )
Document no. &4: no changeable billing order exists ( AH 781 )
Error in user exit EXIT_SAPLEA01_001 ( AH 782 )
Error in user exit EXIT_SAPLEA00_001 ( AH 783 )
Error processing external proration dates ( AH 784 )
Price summary with indicator &1: different backbilling indicators ( AH 785 )
Billing document &1 not indicated as reversed for adjustment ( AH 786 )
Billing doc. &1 reversed for adjustment already reversed in invoicing ( AH 787 )
Billing document &1: adjustment reversal indicator is inconsistent ( AH 788 )
Variant &1 updates from correction period to periodic billing period ( AH 789 )
Update type &1 not permitted for period category &2 ( AH 790 )
Update type &1 not permitted for operand category &2 ( AH 791 )
Device &1 register &2 (log. reg. &3): MR result missing for &4 ( AH 792 )
Unknown calculation reason: &1 ( AH 793 )
Error in user exit EXIT_SAPLE20Q_001 ( AH 794 )
Operand &1 has non-linear weighting &2 ( AH 795 )
Error in user exit EXIT_SAPLE20Q_002 ( AH 796 )
Complete history is not permitted for operand category &1 ( AH 798 )
Error in user exit EXIT_SAPLEA01_002 ( AH 799 )
IF-ELSE-ENDIF clause with different backbilling allocation indicators ( AH 800 )
Maintenance of bill printout operands not permitted ( AH 801 )
Operand &1: "bill printout history" indicator has incorrect value ( AH 802 )
Update in operand &1 not permitted ( AH 803 )
Billing unit of measurement could not be determined ( AH 804 )
Enter standard temperature/zero temperature ( AH 806 )
Not possible to maintain standard temperature/zero temperature ( AH 807 )
Device &1 reg. &2 period &3 - &4: vol. corr. factor cannot be determined ( AH 810 )
Device &1 reg. &2 period &3 - &4: standard volume cannot be determined ( AH 811 )
Device &1 reg. &2 period &3 - &4: operating volume cannot be determined ( AH 812 )
Device &1 reg. &2 period &3 - &4: error in register relationship ( AH 813 )
Device &1 reg. &2 period &3 - &4: vol. corr. factor cannot be determined ( AH 814 )
Device &1 reg. &2 period &3 - &4: error in register relationship ( AH 815 )
Dev. &1 reg. &2 per. &3 - &4: VCF to be transferred cannot be determined ( AH 816 )
Weighting key &1 division cat. &2: energy feeding table incomplete ( AH 817 )
Enter gas pressure correction only for gas pressure determination ( AH 818 )
Only gas pr. correctn can be maintained for GPr. determ. using GPr. area ( AH 825 )
Gas proced. &1 VCF proced. &2: gas pressure area missing ( AH 826 )
Gas proced. &1 VCF proced. &2: gas correction pressure is zero ( AH 827 )
Only enter weighting key if you have set the conversion factor indicator ( AH 828 )
Weighting key &1 weighting procedure &2 not permissible ( AH 829 )
Specify a rate type that results in the same meter reading group ( AH 830 )
Specify a rate type that results in the same validation class ( AH 831 )
Specify a rate type that results in the same minimum portion ( AH 832 )
Specify a rate type that results in the same reference value ( AH 833 )
Execute contract account billing prior to invoicing simulation ( AH 834 )
Amount operand &1 has no weighting key ( AH 842 )
Internal: Change to time category not allowed ( AH 843 )
Internal: Change of weighting key not allowed ( AH 844 )
Internal: Time cat. &1, func. mod. &2, include &3, routine &4 unknown ( AH 845 )
Maintain interval specifications only for price block adjustment ( AH 846 )
Lower limit of interval &1 must be <= upper limit of interval &2 ( AH 848 )
Specify time category for price block adjustment ( AH 849 )
Specify time basis for price block adjustment ( AH 850 )
Lower limit of interval &1 must be <= time basis of &2 days ( AH 851 )
Upper limit of interval &1 must be >= time basis of &2 days ( AH 852 )
Weight. key &1 temp. area &2 period &3 - &4: entire weight is zero ( AH 853 )
Weighting key &1 temp. area &2 period &3 - &4: denominator is zero ( AH 854 )
Device &1 reg. &2 period &3 - &4: conversion factor cannot be determined ( AH 855 )
Update to deletion variant: overwriting of values is not permitted ( AH 856 )
Device &1 reg. &2 period &3 - &4: no conversion factor due to gas date ( AH 857 )
Volume correction factor procedure &1 not permiss. as replacement proc. ( AH 860 )
Specify a valid key date ( AH 861 )
Not permitted to use only presorting keys with no subtotal ( AH 862 )
Not possible to enter a rate type for registers from category &1 ( AH 865 )
No rate category found in table &1 for date &2 ( AH 866 )
Price class cannot contain the special characters * and , ( AH 867 )
Not possible to convert unit of measurement &1 to &2 ( AH 870 )
No energy feeding volume found in month &1 - &2 for cal. val. district &3 ( AH 872 )
No energy feeding volume found for calorific value district &2 from &1 ( AH 873 )
IF-ELSE-ENDIF clause contains different seasons ( AH 874 )
Transfer tables for function module &1 are blank ( AH 875 )
Parameter &V1& in function module &V2& is missing ( AH 876 )
Operand &1 season &2 valid from &3 valid to &4: possible to overwrite ( AH 878 )
Field &1 is not filled ( AH 879 )
Table &1 is empty ( AH 880 )
Automation data already transferred for operand &1 (season &2) ( AH 881 )
Variant &1 requires &2 input operands and &3 output operands ( AH 882 )
Fields &1 and &2 are not filled ( AH 883 )
"Adjust price blocks" is set, but weighting key is missing in operand ( AH 884 )
Not possible to convert unit of measurement &1 to &2 ( AH 886 )
Device &1 register &2: not possible to convert &3 to &4 ( AH 887 )
The deletion logic of price summary indicator &1 is not consistent ( AH 890 )
Reference value &1 does not have reference value type &4 ( AH 893 )
Not permissible to enter season for variant &1 ( AH 894 )
Billing document &1 with origin &2 cannot be reversed ( AH 897 )
Document &1 cannot be reversed (migration) ( AH 898 )
Billing document &1 can only be reversed for adjustment (migration) ( AH 899 )
You cannot manually maintain operand &1 ( AH 901 )
Intervals must not overlap ( AH 902 )
No rates maintained in table TE224 ( AH 903 )
No operands maintained in table TE228 ( AH 905 )
Use at least one selection ( AH 906 )
Simulation period not completely covered by price/operand &1 ( AH 908 )
Prices from different time categories are allocated to operand &1 ( AH 910 )
Time base of prices must correspond during update ( AH 911 )
A document with end date &2 already exists for contract &1 ( AH 913 )
Error in BAdI ISU_BI_PRORATION (Method PRORATION) ( AH 915 )
Error processing external proration dates ( AH 916 )
Quantity for operand update is to high ( AH 917 )
Price does not exist as of &1, but as of &2 ( AH 918 )
IM: InfoObject & is not available in InfoSource &. ( AIBW 006 )
IM: Master data is missing for orders. ( AIBW 009 )
IM: No information loaded into PSA via InfoSource &1 ( AIBW 010 )
IM: Information for InfoSource &1 Request &2 read from PSA ( AIBW 011 )
IM: Generation of a database index for the PSA (return code = &3) ( AIBW 012 )
IM: Generation of database index for InfoObjekt &1 (return code = &3) ( AIBW 013 )
IM: For InfoObject &1, no master data found for value &2 ( AIBW 021 )
IM: Update of group currency is active ( AIBW 023 )
Characteristic Value: &1 does not exist in AIN for &2. ( AIN_INT_MSG 037 )
Notification type &1 is not maintained in EAM ( AIN_INT_MSG 051 )
Priority &1 is not maintained in EAM ( AIN_INT_MSG 052 )
System name is invalid ( AIN_INT_MSG 057 )
Application log is created for AIN_INT object and NOTI subobject ( AIN_INT_MSG 061 )
Plant &1 does not exist ( AIPLOC 001 )
No plant is assigned to vendor &1 ( AIPLOC 002 )
Plant &1 does not exist ( AIPLOC 003 )
Plant &1 is not maintained in table T001W_EXT ( AIPLOC 010 )
Logical system is not maintained correctly ( AIPLOC 016 )
&1 is not the same in tables T001W and T001W_EXT ( AIPLOC 018 )
An error occurred when locking the data ( AIPLOC 020 )
Table T001W_EXT could not be converted ( AIPLOC 032 )
Data for asset view &1 is missing ( AISBAUFBAU 000 )
FM FEGRU_GET: Field cannot be determined completely ( AISBAUFBAU 002 )
FB FEGRU_GET: Field group does not have field group table assignment ( AISBAUFBAU 003 )
Asset transaction type is missing ( AISCO 001 )
No destination for SAP customer number &1 ( AISDK_SP_MESSAGES 056 )
Use the new scenario to create the master data ( AISDK_SP_MESSAGES 300 )
Real estate object does not belong to business area &1 ( AIST 000 )
According to screen layout &4, field &1 of asset &2 &3 cannot be changed ( AIST 001 )
The system ignores reference asset entered for subnumber ( AIST 002 )
Recalculation of values currently not possible in company code &1 ( AIST 004 )
Changes not possible for assets with time-dependent depreciation terms ( AIST 005 )
Different closed fiscal years in depreciation areas ( AIST 006 )
Profit center is not unique (&1/&2) ( AIST 009 )
Segment is not unique (&1/&2) ( AIST 010 )
Mass change: profit center is not unique (&1/&2) ( AIST 012 )
Mass change: segment is not unique (&1/&2) ( AIST 013 )
Not possible to adopt scrap value for time-dependent depreciation term ( AIST 014 )
ANLBZA not updated: &1 &2 &3 (database error during &4) ( AIST 015 )
Profit center is not unique (&1/&2) ( AIST 016 )
Profit center is not unique (&1/&2) ( AIST 017 )
Entering a deactivation date when creating is not allowed ( AIST 018 )
Area choice leads to inconsistency with integrated acquis.; see long text ( AIST 020 )
Only an interval of time-dependent data can be transferred ( AIST 024 )
Internal error during dynamic field symbol assignment ( AIS_REP 002 )
Program attempted to divide by zero while calculating Fisher-Weil duratn. ( AIS_REP 003 )
Key figures have the wrong category ( AIS_STDREP 001 )
You have selected key figures with different risk hierarchies ( AIS_STDREP 003 )
Choose a node or cell of the portfolio hierarchy ( AIS_STDREP 006 )
You have selected key figures with different risk hierarchies ( AIS_STDREP 009 )
Unable to read evaluation procedure for key figure &1 ( AIS_STDREP 015 )
No node has been selected in the risk hierarchy ( AIS_STDREP 016 )
No P/L distribution found ( AIS_STDREP 017 )
Select only one key figure ( AIS_STDREP 020 )
No authorization to read all the selected key figure values ( AIS_STDREP 025 )
Unable to determine a P/L key figure ( AIS_STDREP 027 )
Key figure &1 does not exist on the database ( AIS_STDREP 029 )
Selected key figure &1 has the wrong key figure category ( AIS_STDREP 030 )
Unable to display single positions for key figures for position trend ( AIS_STDREP 035 )
Choose a key figure field ( AIS_STDREP 038 )
Choose one line only ( AIS_STDREP 042 )
Key figure &; Only one key figure of category RAK1/RAV1 can be defined ( AIS_STDREP 044 )
No parameters (except POSNO) are permitted for key figure & ( AIS_STDREP 045 )
Enter values for all the parameters for key figure & ( AIS_STDREP 046 )
Reference to item & is not permitted ( AIS_STDREP 047 )
Enter a definition for a VaR key figure ( AIS_STDREP 048 )
Enter a definition for a backtesting key figure ( AIS_STDREP 049 )
Choose a cell with a key figure reference ( AIS_STDREP 053 )
Use double-click to navigate in the portfolio hierarchy area ( AIS_STDREP 057 )
BM key figures & must be specified along with the assignment variant ( AIS_STDREP 075 )
x-axes are different ( AIS_STDREP 100 )
Data type does not exist ( AIS_STDREP 101 )
Formula &1: Formula parameter &2 no longer exists in layout &3 ( AIS_STDREP 207 )
Formula &1 contains key figure &2 as a variable ( AIS_STDREP 210 )
Vicious circle in formula &3 with other formulas in area &2, layout &1 ( AIS_STDREP 213 )
Layout &1, area &2: Formula &3 is incorrect ( AIS_STDREP 214 )
Layout &1, area &2, formula &3: Formula parameter &4 is incorrect ( AIS_STDREP 215 )
Refresh duration should not exceed &1 minutes ( AI_ALERT_CONSM 000 )
No problem analysis configuration for &1 ( AI_ALERT_CONSM 107 )
Navigation to Technical System Editor is not possible ( AI_ALERT_CONSM 112 )
Application log deletion error ( AI_ALRT_LOG 004 )
You can not change the field 'Type' ( AI_ATTR 002 )
You can not select a 'Technology' with different 'Type' ( AI_ATTR 003 )
The value '&1' of the attribute '&2' is used in sub structure elements ( AI_ATTR 008 )
Archive version not found ( AI_COMPARE 001 )
Internal error ( AI_COMPARE 006 )
Admin data of last comparison run are missing or invalid ( AI_COMPARE 008 )
Debugging information ( AI_COMPARE 011 )
Error occurred at node '&1' and tab '&2' ( AI_COMPARE 012 )
Source node has been deleted ( AI_COMPARE 013 )
Source node has been set to 'obsolete' in BPR ( AI_COMPARE 014 )
Template &1 is presently not released for public use ( AI_COMPARE 016 )
You can't compare nodes in this scenario ( AI_COMPARE 017 )
The global attribute at this node requires that you copy all changes ( AI_COMPARE 018 )
System landscape is currently locked by user &1 ( AI_COMPARE 020 )
Source node does not exist in BPR in the current release context ( AI_COMPARE 021 )
Inactive tabs have been deselected ( AI_COMPARE 023 )
Transaction SA_PROJECT_UPGRADE has not been executed yet for new version ( AI_COMPARE 024 )
Comparison completed for current tab only ( AI_COMPARE 025 )
Comparison on current node has been completed ( AI_COMPARE 026 )
Changes copied - Comparison incomplete ( AI_COMPARE 027 )
Global attribute of node '&1' was changed to '&2' ( AI_COMPARE 028 )
Archive version not found ( AI_COMPARE_N 001 )
Internal error ( AI_COMPARE_N 006 )
Comparison run has not been started ( AI_COMPARE_N 008 )
Debugging information ( AI_COMPARE_N 011 )
Error occurred at node '&1' and tab '&2' ( AI_COMPARE_N 012 )
Node against which is to be compared has been deleted ( AI_COMPARE_N 013 )
Source node has been set to 'obsolete' in BPR ( AI_COMPARE_N 014 )
Template &1 is presently not released for public use ( AI_COMPARE_N 016 )
You can't compare against private template nodes ( AI_COMPARE_N 017 )
The global attribute at this node requires that you copy all changes ( AI_COMPARE_N 018 )
System landscape is currently locked by user &1 ( AI_COMPARE_N 020 )
Source node does not exist in BPR in the current release context ( AI_COMPARE_N 021 )
Unavailable tabs have been disabled ( AI_COMPARE_N 023 )
Transaction SA_PROJECT_UPGRADE has not been executed yet for new version ( AI_COMPARE_N 024 )
Comparison completed for current tab only ( AI_COMPARE_N 025 )
Comparison on current node has been completed ( AI_COMPARE_N 026 )
Changes copied - Comparison incomplete ( AI_COMPARE_N 027 )
Global attribute of node '&1' was changed to '&2' ( AI_COMPARE_N 028 )
More than one successor with differences found to current structure item ( AI_COMPARE_N 036 )
No possible comparison node found ( AI_COMPARE_N 047 )
More than one successor found to current structure item ( AI_COMPARE_N 055 )
BPR context is not unique: "Copied originally from BPR" is chosen ( AI_COMPARE_N 058 )
Changes cannot be copied to this tab from solution ( AI_COMPARE_N 074 )
You need to implement BAdI AI_SC_PUSH_COMPARE before pushing or adjusting ( AI_COMPARE_N 080 )
Errors occurred - check for messages in application log ( AI_COMPARE_N 081 )
Connection Target for connection &1 on system &2 could not be determined. ( AI_CONNECTION_MON 001 )
Some manual activities are still needed. Have a look at the long text. ( AI_CRM_ANALYZE_IBASE 015 )
The change request has no project ( AI_CRM_CM_MESSAGE 008 )
The customizing table and the transaction type do not match ( AI_CRM_CM_MESSAGE 009 )
The action could not determine the last status of the document ( AI_CRM_CM_MESSAGE 010 )
Data in Change Request Scope Assignment block incorrect ( AI_CRM_CM_MESSAGE 013 )
Change documents cannot be generated ( AI_CRM_CM_MESSAGE 014 )
Not linked to an active project cycle ( AI_CRM_CM_MESSAGE 015 )
Process status does not allow changing approval step status ( AI_CRM_CM_MESSAGE 020 )
The transaction is inconsistent; correct the errors ( AI_CRM_CM_MESSAGE 037 )
Change document &1 could not be created ( AI_CRM_CM_MESSAGE 044 )
Solman IBase could not be generated (probably authorization problem). ( AI_CRM_CM_MESSAGE 053 )
Solman IBase could not be assigned (authorization problem). ( AI_CRM_CM_MESSAGE 054 )
Transport request of the change document contains already changes ( AI_CRM_CM_MESSAGE 055 )
Decouple failed ( AI_CRM_CM_MESSAGE 057 )
Not all transports of the change are in all Quality systems yet ( AI_CRM_CM_MESSAGE 065 )
Link to Business Process Change Analyzer could not be started ( AI_CRM_CM_MESSAGE 066 )
User status could not be set because of the status profile customizing ( AI_CRM_CM_MESSAGE 070 )
The Downgrade Protection Check was not passed ( AI_CRM_CM_MESSAGE 072 )
Distributed urgent change &1 could not be created ( AI_CRM_CM_MESSAGE 078 )
Not all change documents in the scope are finished. You cannot withdraw ( AI_CRM_CM_MESSAGE 081 )
Job for updating messages from SAP is running. ( AI_CRM_IM_ICT_EXCH 020 )
Text type &1 of procedure &2 must not be set to changeable. ( AI_CRM_IM_ICT_EXCH 021 )
SAP Solution Manager system number is not maintained. ( AI_CRM_IM_ICT_EXCH 025 )
Action container value is missing for parameter &1. ( AI_CRM_IM_ICT_EXCH 029 )
The transaction could not be sent to SAP. See long text for help. ( AI_CRM_IM_ICT_EXCH 035 )
The transaction could not be updated from SAP. See long text for help. ( AI_CRM_IM_ICT_EXCH 036 )
The transaction could not be confirmed at SAP. See long text for help. ( AI_CRM_IM_ICT_EXCH 037 )
The additional information could not be sent to SAP. See long text. ( AI_CRM_IM_ICT_EXCH 038 )
Job for updating messages from SAP is running. ( AI_CRM_IM_ICT_EXCH 060 )
Report canceled. Too many entries in lock table AIC_ICT_LOCK_UPD. ( AI_CRM_IM_ICT_EXCH 062 )
Please maintain rules for function "Support Team" in FDT_WORKBENCH ( AI_CRM_IM_MESSAGE 008 )
Priority change won't be sent to SAP. Contact SAP directly: Note 560499. ( AI_CRM_IM_MESSAGE 023 )
&1 could not be determined. Check the incident details. ( AI_CRM_IM_TECH_DATA 001 )
No RFC destination to SAP for customer &1. ( AI_CRM_IM_TECH_DATA 002 )
S-User is missing in RFC destination &1. ( AI_CRM_IM_TECH_DATA 003 )
S-User &1 (RFC: &2) is not assigned to a customer. ( AI_CRM_IM_TECH_DATA 004 )
Installation number is missing in transaction &1. ( AI_CRM_IM_TECH_DATA 005 )
Installation number &1 is not assigned to a customer. ( AI_CRM_IM_TECH_DATA 006 )
Contact person is missing in transaction &1. ( AI_CRM_IM_TECH_DATA 007 )
Contact person &1 does not have a valid S-User. ( AI_CRM_IM_TECH_DATA 008 )
S-User(s) (contact: &1) not assigned to a customer. ( AI_CRM_IM_TECH_DATA 009 )
S-User &1 (RFC) is not assigned to customer &2 (installation). ( AI_CRM_IM_TECH_DATA 010 )
Contact's S-User(s) not assigned to customer &2 (installation). ( AI_CRM_IM_TECH_DATA 011 )
S-User (RFC) and S-User (contact) do not belong to the same customer. ( AI_CRM_IM_TECH_DATA 012 )
No customer could be determined for transaction &1. ( AI_CRM_IM_TECH_DATA 013 )
The selected e-mail is already linked to a CRM order. ( AI_CRM_IM_UI 001 )
The referenced system may not be used in incidents. ( AI_CRM_OBJECT 030 )
No descriptions availabe in LMDB for System &1 &2 ( AI_CRM_OBJECT 037 )
Generation finished. For detailed information go to the application log. ( AI_CRM_PRODUCT 013 )
You cannot set the status to "Production" ( AI_DIRECTORY 005 )
Interfaces are assigned to the process step. Delete the assignment first ( AI_DIRECTORY 006 )
The interface is assigned to process steps ( AI_DIRECTORY 007 )
Check-out error. No Scenario folder in project ( AI_DIRECTORY 015 )
Cannot activate new scenario order check-out because of solution &1 ( AI_DIRECTORY 021 )
Cannot check scenario "&1" out, already deleted from maintenance project ( AI_DIRECTORY 027 )
Deletion error in assigned 'sadir_ch_out_*' tables ( AI_DIRECTORY 041 )
There are &1 not-released documents ( AI_DIRECTORY 059 )
You cannot currently 'Remove Link' ( AI_DIRECTORY 063 )
Several (&1) causes prevent check-in and query ( AI_DIRECTORY 069 )
There are more search results (&1 of &2) - start node: &3 ( AI_DIRECTORY 093 )
Monitoring and Alerting content is not yet updated ( AI_JOBMON_MESSAGES 036 )
Job &1 for CL Entry deletion is already scheduled or running ( AI_LMDB_CHANGELOG 017 )
Software catalog in LMDB is not up-to-date, please see SAP note 669669 ( AI_LMDB_CS_WIZARD 029 )
CIM model outdated; import at least version &1 (note 669669) ( AI_LMDB_CS_WIZARD 050 )
No SLD configured ( AI_LMDB_CS_WIZARD 100 )
No all required properties for ESID-Generation in SMSY where supplied. ( AI_LMDB_ESID_GEN 006 )
User &1 is currently editing &2 &3 ( AI_LMDB_EXTERNAL 007 )
The entered selections were not accepted ( AI_LMDB_EXTERNAL 012 )
Value '*' selected -> Remove all other values ( AI_LMDB_EXTERNAL 022 )
Maintype &2 of subtype &1 does not belong to the selected maintype(s) ( AI_LMDB_EXTERNAL 023 )
Invalid selection: use only the TAB 'Select Single Values' ( AI_LMDB_EXTERNAL 029 )
User &1 has no authorization for LMDB Object (&2 / &3 / &4) ( AI_LMDB_EXTERNAL 040 )
User &1 has no authorization for LMDB administration (&2 / &3 / &4) ( AI_LMDB_EXTERNAL 041 )
License Number is not valid. ( AI_LMDB_EXTERNAL 058 )
Technical system &1 is not part of any product system ( AI_LMDB_UI_EXTERNAL 006 )
No product marked as diag. rel. for system &1 ( AI_LMDB_UI_EXTERNAL 008 )
No product system assigned to selected technical system ( AI_LMDB_UI_EXTERNAL 009 )
&1 is not used in LMDB product system but in SMSY product system (&2) ( AI_LMDB_UI_EXTERNAL 010 )
Cannot find product system &1 in the LMDB ( AI_LMDB_UI_EXTERNAL 011 )
Cannot find technical system &1 &2 in the LMDB ( AI_LMDB_UI_EXTERNAL 012 )
Project &1 Generation Error ( AI_ROADMAP 003 )
No Roadmap is assigned to project &1 ( AI_ROADMAP 031 )
Information can be lost if you change the Roadmap assignments ( AI_ROADMAP 047 )
Transaction type &1 is currently not supported ( AI_ROADMAP 090 )
This roadmap is used in the projects ( AI_ROADMAP_EN 004 )
You are not authorized to remove data from this tab ( AI_ROADMAP_EN 039 )
You are not authorized to display any tab in project &1 ( AI_ROADMAP_EN 041 )
You are not authorized to display tab &1 ( AI_ROADMAP_EN 042 )
Authorization object AI_CUSACC is outdated, adjust your role ( AI_ROADMAP_EN 048 )
Topic assigned to selected node. Node title can not be changed ( AI_ROADMAP_EN 060 )
System setting does not allow you to change this roadmap ( AI_ROADMAP_EN 062 )
System setting does not allow you to change this role ( AI_ROADMAP_EN 068 )
Attributes of nodes might have to be adapted, please check ( AI_ROADMAP_EN 069 )
System setting does not allow you to change this flavor ( AI_ROADMAP_EN 070 )
System setting does not allow you to change this subject area ( AI_ROADMAP_EN 072 )
Roadmap &1 can't be used since it is not visible ( AI_ROADMAP_EN 110 )
No roadmap can be used for project &1 ( AI_ROADMAP_EN 111 )
Document could not be changed. See long text for more explanations. ( AI_ROADMAP_EN 190 )
Work Area '&1' can only be maintained in its original language: &2 ( AI_ROADMAP_EN 196 )
Topic must be saved to generate the document used for the display ( AI_ROADMAP_EN 200 )
User &1 lacks authorization object &3 for installation &2 ( AI_SC_EN 001 )
System number unknown for system &1 ( AI_SC_EN 015 )
Only frontend PCs maybe deleted here, no backend servers ( AI_SC_EN 019 )
More than one open or waiting connection ( AI_SC_EN 029 )
Invalid URL ( AI_SC_EN 041 )
Access to system &1 is refused ( AI_SC_EN 045 )
System number &1 for system &2 not found in SAP Support Portal ( AI_SC_EN 056 )
Contact does not exist ( AI_SC_EN 058 )
Your user has no SAP Support Portal user assigned ( AI_SC_EN 060 )
Report AI_SC_REFRESH_READ_ONLY_DATA has errors ( AI_SC_EN 061 )
Systemnumber &1 for system &2 unknown in Solution Manager ( AI_SC_EN 067 )
Navigation to system &1 is not allowed ( AI_SC_EN 070 )
No monitored systems found for Solution Manager Diagnostics ( AI_SC_EN 078 )
No ABAP-based substitute system was found for system &1 ( AI_SC_EN 079 )
No substitute system was found for system &1 that has RFC-Destinations ( AI_SC_EN 080 )
System(s) will be opened at the specified date and time ( AI_SC_EN 082 )
Remote login allowed at the specified date and time ( AI_SC_EN 083 )
Server &1 does not exist in transaction SMSY ( AI_SC_EN 084 )
No job found for program &1 - check IMG act. 'Schedule Background Jobs' ( AI_SC_EN 087 )
System &1 in Installation &2 is unknown in SAP Support Portal ( AI_SC_EN 092 )
Partner &1 not found - see longtext ( AI_SC_EN 093 )
Installation number &1 is unkown in SAP Support Portal ( AI_SC_EN 094 )
There are installation number problems with some installations ( AI_SC_EN 095 )
There are authorization problems with some installations ( AI_SC_EN 096 )
SAP customer number unknown for installation number &1 ( AI_SC_EN 097 )
No system headers will be generated in SMSY from SAP Support Portal ( AI_SC_EN 098 )
No systems found to generate ( AI_SC_EN 101 )
Can't create system &1 in installation &2 ( AI_SC_EN 102 )
No new systems found in SAP Support Portal to generate in SMSY ( AI_SC_EN 103 )
No customer numbers maintained in view V_AISAPCUSTNOS ( AI_SC_EN 106 )
No customer system suffix found for business partner &1 / customer &2 ( AI_SC_EN 108 )
No Businss Partners will be generated from SAP Customer numbers ( AI_SC_EN 109 )
RFC-user misses authorization for System Data Maintenance ( AI_SC_EN 110 )
The RFC-user does not belong to a VAR- or CCC-customer number ( AI_SC_EN 111 )
No customer numbers were found in SAP Support Portal ( AI_SC_EN 112 )
No installations flagged for system generation for customer &1 ( AI_SC_EN 119 )
User &1 does not exist in AISUSER ( AI_SC_EN 120 )
No email address is maintained for S-user &1 of customer &2 ( AI_SC_EN 125 )
Several SU01 users exist with email id &1 (user &2 and &3) ( AI_SC_EN 127 )
Customer &1 does not allow RFC access - use Service Connector ( AI_SC_EN 135 )
Your user has no SAP Support Portal user assigned ( AI_SC_EN 138 )
IBase generation is switched off ( AI_SC_EN 139 )
Product version of &1 differs between SMSY and Support Portal ( AI_SC_EN 141 )
System &1 has been deleted in SAP Support Portal ( AI_SC_EN 142 )
There are systems without connections that have an unknown status ( AI_SC_EN 144 )
Unknown backend error ( AI_SC_EN 204 )
No systems found in transaction SMSY ( AI_SC_EN 211 )
System &1 has already been migrated before ( AI_SC_EN 351 )
Systems not migrated ( AI_SC_EN 352 )
Service Connection Data have been deleted for system &1 ( AI_SC_EN 356 )
Ping to SAP Service System failed on system &1 via &2 &3 ( AI_SC_EN 423 )
Function module not found on system &1 to ping SAP Service System ( AI_SC_EN 424 )
No destination found in transaction SMSY for system &1 and client &2 ( AI_SC_EN 426 )
Ping to SAP Support Backbone failed ( AI_SC_EN 427 )
System &1 can not be accessed via destination &2 ( AI_SC_EN 428 )
No RFC destination found for system &1 ( AI_SC_EN 430 )
Trying to ping SAP via system &1 as substitute for &2 ( AI_SC_EN 431 )
This is a special service that does not need a connection via SAProuter. ( AI_SC_EN 434 )
System &1 has wrong installation number in transaction SMSY ( AI_SC_EN 435 )
Error while adding system authorization to business partner &1 ( AI_SDK_SP_MSG 005 )
Error while deleting system authorization from business partner &1 ( AI_SDK_SP_MSG 006 )
Error while creating the relationship between business partner &1 and &2 ( AI_SDK_SP_MSG 044 )
Relationship between business partner &1 and &2 successfully created ( AI_SDK_SP_MSG 045 )
Error while deleting the relationship between business partner &1 and &2 ( AI_SDK_SP_MSG 050 )
Relationship between business partner &1 and &2 successfully deleted ( AI_SDK_SP_MSG 051 )
The contact information of S-User &1 is missing ( AI_SDK_SP_MSG 052 )
Adding the SP002 identification to business partner &1 failed ( AI_SDK_SP_MSG 065 )
Error while sending the notification email to recipient &1 ( AI_SDK_SP_MSG 068 )
No business partner (organization) found for customer no. &1 ( AI_SDK_SP_MSG 084 )
Email notifiaction for S-User &1 canceled by BAdI implementation ( AI_SDK_SP_MSG 087 )
Master data in table AICONTACTS OR AIINSTACCESS missing ( AI_SDK_SP_MSG 089 )
E-Mail could not be sent, document was not found in user language ( AI_SDK_SP_MSG 092 )
No original (see long text) ( AI_SHORTCUTS 001 )
All Number Range Intervals are correct ( AI_SISE_INC 022 )
Errors occurred during maintenance of product ID length ( AI_SISE_INC 111 )
PPM project is assigned to a SolMan project in a different client ( AI_SMCP 009 )
Project cannot be deleted because a PPM project is assigned ( AI_SMCP 010 )
No user for business partner &1 ( AI_SMCP 011 )
Usage of resource &1 in SAP Solution Manager project will also be removed ( AI_SMCP 018 )
Project cannot be deleted because a Solution Manager project is assigned ( AI_SMCP 019 )
Cannot check usage of deleted resource in SAP Solution Manager project ( AI_SMCP 020 )
Internal error ( AI_SMCP 032 )
Transaction is assigned to a different SolMan project ( AI_SMCP 061 )
Contradictory assignment of task and transaction types ( AI_SMCP 063 )
Contradictory combination of creation and assignment modes ( AI_SMCP 064 )
Solution Manager project assignment of the transaction cannot be updated ( AI_SMCP 067 )
SAP Solution Manager project &1 does not exist ( AI_SMCP 073 )
Error 130: Business Blueprint cannot be generated ( AI_SOLAR08 130 )
Error 141: Configuration Guide cannot be generated ( AI_SOLAR08 141 )
Document with this documentation type cannot be assigned in the project ( AI_SOLAR10 106 )
Document flagged as 'Not Blueprint-Relevant' (Blueprint block) ( AI_SOLAR10 108 )
There can only be one document of this type at this node ( AI_SOLAR10 109 )
Service &1 is not active ( AI_SOLAR10 132 )
Service 'SAP/BC/CONTENTSERVER' is not active ( AI_SOLAR10 133 )
No user or no valid password for service &1 ( AI_SOLAR10 134 )
The signature can only be started by a change of status ( AI_SOLAR10 228 )
No authorization procedure defined for document status &2 ( AI_SOLAR10 230 )
No authorization procedure is defined for this document ( AI_SOLAR10 231 )
Document cannot be edited ( AI_SOLAR10 271 )
Document cannot be edited. Document attributes are displayed ( AI_SOLAR10 272 )
Document cannot be deleted ( AI_SOLAR10 273 )
Only select objects of the same type ( AI_SOLAR11 006 )
Component &1: Enter a customizing transport request ( AI_SOLAR11 014 )
Activation cancelled in system &1 (&2) ( AI_SOLAR11 015 )
Activation errors in system &1 (&2) ( AI_SOLAR11 016 )
Activation warning in system &1 (&2) ( AI_SOLAR11 017 )
Asynchronous remote activation started in system &1 (&2) ( AI_SOLAR11 018 )
Activation in system &1 (&2) successfully completed ( AI_SOLAR11 020 )
No transport requests found for project &1 in system &2(&3) ( AI_SOLAR11 021 )
Mark IMG objects with the same components ( AI_SOLAR11 024 )
Test case &1 must be of type CATT ( AI_SOLAR11 025 )
In system &1 (&2) activation was completed with protocol information ( AI_SOLAR11 026 )
Select at least one row ( AI_SOLAR11 028 )
Component &1: Specify a Workbench transport request ( AI_SOLAR11 030 )
No BC Set(s) in system &1(&2) ( AI_SOLAR11 032 )
Client setting in system &1(&2) does not allow BC Set activation ( AI_SOLAR11 034 )
You are not authorized to activate BC Sets in system &1(&2) ( AI_SOLAR11 035 )
BC Set activation finished ( AI_SOLAR11 039 )
You can only activate BC Sets under system role Development/Customizing ( AI_SOLAR11 041 )
Deselected nodes are not deleted in thr tab ( AI_SOLAR11 042 )
Select CATTs/eCATT test configurations with the same component ( AI_SOLAR11 043 )
Component &2: Transport request &1 does not exist ( AI_SOLAR11 044 )
No authorization to run CATTs in system &1(&2) ( AI_SOLAR11 046 )
Transport of imported data is not supported under system role &1 ( AI_SOLAR11 047 )
The client setting in system &1(&2) does not allow execution of CATTs ( AI_SOLAR11 048 )
Transport request &1 is not a Workbench request ( AI_SOLAR11 052 )
Transport request &1 is not a customizing request ( AI_SOLAR11 053 )
You cannot change transport request &1 ( AI_SOLAR11 054 )
You can only configure in a project ( AI_SOLAR11 055 )
Clent setting in system &1(&2) does not allow import ( AI_SOLAR11 056 )
No request was found in system &1(&2) which is assigned to &3 ( AI_SOLAR11 060 )
Test case type '&1' is not supported ( AI_SOLAR11 065 )
Manual test cases cannot be run automatically ( AI_SOLAR11 067 )
No authorization to activate BC Sets in local system ( AI_SOLAR11 073 )
No subproject found for &3 in system &1(&2) ( AI_SOLAR11 074 )
Specify an unassigned object ( AI_SOLAR11 075 )
Assigned objects have not been copied ( AI_SOLAR11 076 )
Subproject &1 not found in system &2(&3) ( AI_SOLAR11 077 )
Basis release &2 in system &1 is inadequate ( AI_SOLAR11 078 )
Support Package level &2 in system &1 is inadequate ( AI_SOLAR11 079 )
System &1 is unknown in the system landscape ( AI_SOLAR11 080 )
Basis release of system &1 is inadequate ( AI_SOLAR11 081 )
Support Package level of system &1 is inadequate ( AI_SOLAR11 082 )
Assign &1 in the 'Transactions' tab first ( AI_SOLAR11 092 )
Assign test objects in the 'Transactions' tab first ( AI_SOLAR11 094 )
Central repository is not supported for type '&1' (see long text) ( AI_SOLAR11 095 )
Function &2 is not supported in system/software component &1 ( AI_SOLAR11 099 )
Function &2 is not supported in system/software component &1 ( AI_SOLAR11 100 )
Assign team members &1 in the Project Administration tab first ( AI_SOLAR11 108 )
Performance Assistant could not be started ( AI_SOLAR11 115 )
The requested object is locked by another transaction ( AI_SOLAR11 116 )
No test catalog found ( AI_SOLAR11 117 )
Max. no. of entries for MS Project &3 exceeded ( AI_SOLAR16 010 )
Max. no. of team members for MS Project &3 exceeded ( AI_SOLAR16 011 )
Max. no. of processors per procedure for MS Project &3 exceeded ( AI_SOLAR16 012 )
No RFC destination to NW content system defined ( AI_SOLAR_BIZC 000 )
No NetWeaver content system defined ( AI_SOLAR_BIZC 001 )
Error copying NetWeaver Content. &1 &2 &3 &4 ( AI_SOLAR_BIZC 002 )
Error calling NetWeaver content system &1 (client &2 ) ( AI_SOLAR_BIZC 007 )
The NW content system is not consistent with the Solution Manager ( AI_SOLAR_BIZC 009 )
The NetWeaver content system must be refreshed (see long text) ( AI_SOLAR_BIZC 010 )
The logical component assigned to the NW content is not valid ( AI_SOLAR_BIZC 011 )
The product assigned to the NetWeaver content is not valid ( AI_SOLAR_BIZC 012 )
Error importing NetWeaver content data. &1 &2 &3 &4 ( AI_SOLAR_BIZC 015 )
NetWeaver content framework error. &1 &2 &3 &4 ( AI_SOLAR_BIZC 030 )
Message not yet sent to SAP ( AI_SOLAR_SDK 001 )
User &1 has no authorization for system/installation &2 ( AI_SOLAR_SDK 002 )
No text of type & ( AI_SOLAR_SDK 005 )
Message already sent to SAP ( AI_SOLAR_SDK 009 )
Service message &1 added. Save the changes ( AI_SOLAR_SDK 020 )
Service message &1 created. Save the changes ( AI_SOLAR_SDK 021 )
You are only authorized for a retricted selection of text types ( AI_SOLAR_SDK 111 )
Cannot add/update the following knowledge articles: &1 ( AI_SOLAR_SDK 116 )
Message already sent to SAP. You can perform the PCC service ( AI_SOLAR_SDK 125 )
Assignment cannot be deleted ( AI_SOLAR_VAL 050 )
Transaction &1 is locked by user &2. Check-out cancelled ( AI_SOLAR_VAL 051 )
Transaction &1 is locked by user &2. Action cancelled ( AI_SOLAR_VAL 053 )
Illegal partner function supplied (technical key &1), see longtext ( AI_SOLMAN_BUPA_API 005 )
Business function '&3' is in use. You cannot remove it from the BF Scope ( AI_SOLMAN_SFW_BFS 001 )
System is not available for logical component '&1' and system role '&2' ( AI_SOLMAN_SFW_BFS 003 )
BF set selection is required for logical component '&1' ( AI_SOLMAN_SFW_BFS 009 )
No consistently selectable BF set for logical component '&1' ( AI_SOLMAN_SFW_BFS 011 )
Different BF sets are assigned to logical components for system '&2' ( AI_SOLMAN_SFW_BFS 013 )
Assigned BF set '&2' is not selected in system '&3' ( AI_SOLMAN_SFW_BFS 022 )
Assigned BF set '&2' differs from the selected in system '&3' ( AI_SOLMAN_SFW_BFS 023 )
BF set '&2', selected in system '&3' is not assigned to logical component ( AI_SOLMAN_SFW_BFS 025 )
No consistently selectable BF set for system '&3' ( AI_SOLMAN_SFW_BFS 026 )
Assigned business function set '&2' is not valid ( AI_SOLMAN_SFW_BFS 031 )
No business function set is selected ( AI_SOLMAN_SFW_BFS 032 )
Error during consistence check in switch framework. ( AI_SOLMAN_SFW_BFS 055 )
Scoped BF set '&1' differs from the selected BF set '&2' in system ( AI_SOLMAN_SFW_BFS 056 )
BF '&1' conflicts with BF '&2'. ( AI_SOLMAN_SFW_BFS 058 )
Cannot log on. User &1 is not a dialog user ( AI_SOLMAN_SFW_CORE 026 )
SFW functionality not centrally available for system &1 ( AI_SOLMAN_SFW_CORE 027 )
&1 ( AI_SOLMAN_SFW_CORE 066 )
Function cannot be performed without customer business partner ( AI_S_SMSY_BP 004 )
No 'Central Person' for user &1 ( AI_S_SMSY_BP 013 )
No unambiguous customer for your customer user ( AI_S_SMSY_BP 015 )
Data Separation by SAP Customer Number is Inactive ( AI_S_SMSY_BP 017 )
System used in logical component with business partner &4 ( AI_S_SMSY_BP 018 )
Mode is not supported ( AI_S_SOLMAN_SETUP 000 )
CUA is active on system &1. RFC &2 and user &3 must be manually updated ( AI_S_SOLMAN_SETUP 006 )
CUA is active on system &1. RFC &2 and user &3 must be manually updated ( AI_S_SOLMAN_SETUP 007 )
ST-PI 2008_1_* Plug-in required for Managed System &1 ( AI_S_SOLMAN_SETUP 009 )
Support Package for SAP_BASIS is missing in Managed System &1 ( AI_S_SOLMAN_SETUP 010 )
Cannot get the fully qualified name of the server &1 ( AI_S_SOLMAN_SETUP 011 )
Maintain the managed system instance in transaction SMSY ( AI_S_SOLMAN_SETUP 013 )
Destination &1 created ( AI_S_SOLMAN_SETUP 019 )
Roles weren't uploaded to managed system &1 client &2 ( AI_S_SOLMAN_SETUP 033 )
No billing orders exist for contract &1 ( AJ 001 )
Internal: invalid access control &1 for operand &2 ( AJ 005 )
Contract is only valid for the period &3 - &4 ( AJ 006 )
No rate found for rate type &1 and rate category &2 ( AJ 009 )
Internal: error in function module &1 ( AJ 010 )
No season period was defined for season &1 ( AJ 012 )
No operand values were found for operand &1 ( AJ 013 )
An optional schema step was only assigned values for part of the period ( AJ 014 )
Different rate fact groups were found for rate &1 ( AJ 015 )
Rate &1 is not in schema &2 ( AJ 016 )
Schema &1 has been blocked for billing since &2 ( AJ 017 )
Billing transaction &1 is not permitted here ( AJ 018 )
Invalid value in control; value: &1 ( AJ 019 )
Output operand of variant can only be updated once ( AJ 021 )
Negative differences are not permitted ( AJ 022 )
Internal error in form &1 (function module &2) ( AJ 026 )
No billing orders exist for installation &1 ( AJ 027 )
Installation &1: no installation time slices were found ( AJ 028 )
No unit of measurement for meter reading exists ( AJ 029 )
No unit of measurement for billing exists ( AJ 030 )
System expects &1 line item types; actual number: &2 ( AJ 031 )
System expects &1 controls; actual number: &2 ( AJ 032 )
Maximum sort field permitted: &1; actual maximum: &2 ( AJ 033 )
Unknown time category &1 in variable &2 ( AJ 034 )
Discount type &1 for discount &2 is not permitted in the variant ( AJ 035 )
Reference base &1 for discount &2 is not permitted in the variant ( AJ 036 )
Contract &1 is not billable ( AJ 049 )
Contract &1 is billable ( AJ 050 )
Installation &1 is not billable ( AJ 051 )
Installation &1 is billable ( AJ 052 )
Table &1 in program &2 must be empty ( AJ 053 )
Internal: all proration reasons are already filled in table ITERM ( AJ 054 )
No rate was found for the period &1 to &2 ( AJ 055 )
Not possible to update operand &1 to the installation facts ( AJ 056 )
Error updating operand &1 in the installation facts ( AJ 057 )
No values found for price &1 ( AJ 059 )
Error updating operand &1 in the installation facts ( AJ 060 )
Contract &1 is blocked for billing, billing block reason &2 ( AJ 063 )
Field &1 is empty ( AJ 064 )
Error updating operand &1 in the installation facts ( AJ 065 )
* ( AJ 066 )
Do not process demand from facts next to demand from registers ( AJ 067 )
Internal: this type of budget billing amt extrapolation is not possible ( AJ 068 )
Price &1 has incorrect franchise fee category ( AJ 069 )
No price key was found for price operand &1 ( AJ 070 )
Price &4 is not an average price ( AJ 071 )
The type of backbilling was changed ( AJ 072 )
The type of period-end billing was changed ( AJ 073 )
The length of the backbilling period has changed ( AJ 074 )
The length of the period-end billing period has changed ( AJ 075 )
Operand &1 has invalid value &2 ( AJ 076 )
No price amounts for currency &2 were found for price &1 ( AJ 078 )
Amount for operand &v1& has incorrect currency ( AJ 079 )
Register discount not possible ( AJ 082 )
Register discount &1 has incorrect reference base ( AJ 083 )
No discount amounts for currency &2 were found for discount &1 ( AJ 084 )
Amount for operand &1 cannot be converted ( AJ 085 )
Not possible to update operand &1 to the installation facts ( AJ 086 )
Contract &1 is blocked from automatic billing ( AJ 087 )
Specify a date starting from &1 as the check date ( AJ 088 )
Specify a date starting from &1 as the extrapolation date ( AJ 089 )
Specify a valid simulation period ( AJ 090 )
Billing order for &1 cannot be processed ( AJ 091 )
Price &1 has incorrect unit of measurement ( AJ 092 )
Discount &1 has incorrect unit of measurement ( AJ 093 )
No values found for discount &1 ( AJ 094 )
Contract &1 is not allocated to an installation ( AJ 095 )
Division &1 is not permitted for billing objects ( AJ 096 )
Unexpected termination in variant &1 in schema &2 ( AJ 097 )
Billing document &1 for contract &2 has been outsorted ( AJ 098 )
No valid budget billing period has been determined ( AJ 099 )
Operand &1 is season-based, but no season has been defined ( AJ 100 )
The number of demand peaks for operand &1 is zero ( AJ 101 )
Period-end billing cannot be executed yet ( AJ 102 )
Portion has been changed within the backbilling period ( AJ 103 )
Meter reading unit has been changed within the backbilling period ( AJ 104 )
Portion has been changed within the period-end billing period ( AJ 105 )
Meter reading unit has been changed within the period-end billing period ( AJ 106 )
Periodic billing cannot be performed yet ( AJ 107 )
Interim billing is not permitted within the backbilling period ( AJ 108 )
Interim billing is not permitted within the period-end billing period ( AJ 109 )
Execute period-end billing first ( AJ 110 )
Period-end billing order is missing ( AJ 111 )
Schema contains no period-end billing rate ( AJ 112 )
Not permissible to change rate category in period-end billing period ( AJ 113 )
Not permissible to change rate category in backbilling period ( AJ 114 )
Not permissible to change rate category in period-end billing period ( AJ 115 )
Budget billing amount extrapolation cannot be performed ( AJ 124 )
Simulation cannot be performed due to backbilling or final billing ( AJ 125 )
Season definition for season &1 is not unique ( AJ 126 )
Not possible to update operand &1 of the operand category &2 ( AJ 127 )
Billing document was placed in the spool ( AJ 128 )
Operand &1 requires a weighting key ( AJ 135 )
Control document &1 was deleted; invoicing document &2 was posted ( AJ 138 )
Value &1 is too high for multiplying it with price block of price &2 ( AJ 145 )
Billing order for method UtilBillingDocAuto.Create is missing ( AJ 146 )
Not possible to update an average price for price &1 ( AJ 150 )
Not possible to update operand &1 to the installation facts ( AJ 151 )
Not possible to delete line items in the case of price summary &1 ( AJ 154 )
Burning hours for operation mode &1 not maintained from &2 to &3 ( AJ 155 )
No previous document could be found for contract &1 ( AJ 156 )
Previous document for contract &1 could not be read ( AJ 157 )
Period-end billing document could not be read for contract &1 ( AJ 158 )
No period-end billing document could be determined for contract &1 ( AJ 159 )
No documents for period-end billing period found for contract &1 ( AJ 160 )
No backbilling period documents found for contract &1 ( AJ 161 )
No operation modes maintained for lighting unit &1 ( AJ 162 )
Key date is required for access control &1 ( AJ 163 )
Specify a key date for period control &1 ( AJ 166 )
Quantity bases for price &1 and price &2 do not match ( AJ 167 )
Only standard prices can be processed ( AJ 168 )
Operand &1 is used twice in deletion variants ( AJ 170 )
Deletion operand &1 in step &2 is inconsistent ( AJ 171 )
Operand &1 is not used as a deletion operand ( AJ 172 )
Deletion variant with inconsistent time slice ( AJ 173 )
Deletion operand &3 in schema &1 is inconsistent ( AJ 174 )
Output operand &1 in step &2 does not correspond to deletion operand &3 ( AJ 180 )
Cal. value maintenance not permitted for CV procedure &1 time ref. CV &2 ( AJ 183 )
Only arithmetic average is possible for daily temperature values ( AJ 184 )
Only possible to calculate average using billing period ( AJ 185 )
Weighting key &1 not permissible with weighting procedure &2 ( AJ 186 )
Create operand values for operand &1 (season &2) ( AJ 188 )
Rate determination for rate type &1 and rate category &2 inconsistent ( AJ 190 )
A rate determination already exists for rate type &1 and rate category &2 ( AJ 193 )
Device &1 register &2 period &3-&4: calorific value district missing ( AJ 194 )
Device &1 reg. &2 period &3-&4: compressibility via user exit incorrect ( AJ 195 )
Device &1 reg. &2 period &3-&4: compressibility from user exit missing ( AJ 196 )
Dev. &1 reg. &2 per. &3-&4: incor. from-date in comp.table from user exit ( AJ 197 )
Dev. &1 reg. &2 per. &3-&4: incor. to-date in compr. table from user exit ( AJ 198 )
Device &1 reg. &2 per. &3-&4: compress. table from user exit inconsistent ( AJ 199 )
Device &1 reg. &2 per. &3-&4: compress. table from user exit implausible ( AJ 201 )
Device &1 reg. &2 per. &3-&4: compress. table from user exit unclear ( AJ 202 )
Rate type &1 and rate category &2 belong to different divisions ( AJ 203 )
Rate type &1 and rate category &2 belong to different billing classes ( AJ 204 )
Rate &1 has division &2; rate category &3 has division &4 ( AJ 205 )
Rate &1 has billing class &2; rate category &3 has billing class &4 ( AJ 206 )
Rate &1 is not contained in schema &2 ( AJ 207 )
Franchise contract &1 not valid in specified period ( AJ 209 )
Schema &1 does not contain rate &2 ( AJ 214 )
Lock problem occurred during rate determination ( AJ 215 )
Calorific value district &1: no daily calorific values exist ( AJ 216 )
Calorific value district &1 <,= date &2: cal. values for billing missing ( AJ 218 )
You have already entered rate &1 ( AJ 219 )
Incorrect combination of field entries for base procedure &1 ( AJ 220 )
Rate &1 permissibility does not correspond to permissibility for &2 ( AJ 221 )
No register rate is allocated to rate type &1 and rate category &2 ( AJ 222 )
Device &1 reg. &2 period &3-&4: measured press./air press./temp. missing ( AJ 223 )
Automation data for rate determination is inconsistent ( AJ 230 )
Automation data for rate determination is inconsistent ( AJ 231 )
Automation data for rate determination is inconsistent ( AJ 232 )
Periods were adjusted ( AJ 235 )
Gas law deviation factor 03 is only possible for temp./pressure billing ( AJ 237 )
Mass run terminated due to customer check ( AJ 238 )
Value not permissible for a month: &1 ( AJ 239 )
Error in communication processing ( AJ 240 )
Device &1 (logical register &2) period &3-&4: error reading P_X_ZW ( AJ 241 )
Dev. &1 reg. &2 per. &3-&4: no VCF (oper.vol. meter shows zero consumpt.) ( AJ 242 )
Line item type &1 does not exist ( AJ 243 )
Different franchise fee groups exist for line item type &1 in the rate ( AJ 244 )
No franchise fee group exists in the rate for line item type &1 ( AJ 245 )
No franchise fee group exists in the rate ( AJ 246 )
No franchise contract in the installation ( AJ 247 )
Dev. &1 reg. &2 per. &3-&4: no VCF (stnd vol. meter shows zero consumpt.) ( AJ 248 )
No contribution defined for the franchise contract being used ( AJ 249 )
Select the corresponding indicator for the exception list ( AJ 250 )
Price update with operand &1: price type does not match ( AJ 254 )
Price blocks do not match; price update is not possible ( AJ 255 )
New line items have resulted ( AJ 256 )
Number of line items were reduced to &1 ( AJ 257 )
Enter a value that is not season-based for operand &1 ( AJ 258 )
Enter a value for season &2 for operand &1 ( AJ 259 )
Meter reading result for device &1 register &2 missing on &3 ( AJ 260 )
Backbilling period &1: error at start of meter reading result determin. ( AJ 265 )
Backbilling period &1: error at end of meter reading result determination ( AJ 266 )
Function module &1: error during extrapolation ( AJ 272 )
Specify a rate type that results in an appropriate unit of measurement ( AJ 273 )
Internal error translating amount field in outsorting &1 ( AJ 274 )
Invoicing documents cannot be billed again ( AJ 276 )
Released documents cannot be reversed or billed again ( AJ 277 )
Billing was terminated via the UTILIT99 variant ( AJ 282 )
Billing order cannot be processed ( AJ 285 )
Internal: event &1 for object type &2 cannot be triggered ( AJ 290 )
Not possible to maintain history for average price without history ( AJ 293 )
Not possible to maintain a factor here with franchise fee category ( AJ 294 )
Prices with history require a transaction currency ( AJ 295 )
Individual contracts for outline contr. &1 did not pass completeness chck ( AJ 296 )
More than one value was updated for operand &1 ( AJ 300 )
No demand values are set to active ( AJ 302 )
Contract &1 is blocked for billing, billing block reason &2 ( AJ 303 )
Price can only be saved with historical data ( AJ 308 )
Specify a date within the period &1 - &2 ( AJ 309 )
Transfer of facts for installation &1 terminated due to errors ( AJ 321 )
Not possible to transfer facts for installation &1 ( AJ 322 )
Not possible to transfer facts to installation &1 ( AJ 323 )
Error occurred reversing the transfer of facts for installation &v1& ( AJ 326 )
Document number &1: error in user exit for billing reversal ( AJ 327 )
Contract &1: no billing documents exist in the period &2 - &3 ( AJ 328 )
Method &1: error inserting document number &2 for table &3 ( AJ 329 )
No values were found for operand &1 on &2 ( AJ 335 )
Select an input operand ( AJ 337 )
Document &1: update error in function module &2 ( AJ 338 )
Discount &1 has division &2 instead of &3 ( AJ 341 )
Discount &1 has billing class &2 instead of &3 ( AJ 342 )
Discount &1 is not valid through &2 ( AJ 343 )
Choose a shorter billing period ( AJ 344 )
Operand &1 updates to schema step with fact values ( AJ 345 )
Implausible overflow for device &1, register &2, from-date &3, to-date &4 ( AJ 346 )
Proration error ( AJ 347 )
Error rounding actual meter reading results to the meter reading rounding ( AJ 348 )
Specify a contract for which backbilling or period-end billing is active ( AJ 350 )
Device &1 register &2: meter reading document numbers &3/&4 incorrect ( AJ 352 )
Document no. &1: incorrect call of adjustment reversal for a move-out ( AJ 356 )
Adjustment reversal not poss. for period-end billing doc. &1 for move-out ( AJ 357 )
No unit of measurement for billing exists ( AJ 358 )
Error occurred in quantity conversion regarding number of conversions ( AJ 359 )
Error occurred in quantity conversion when grouping together time slices ( AJ 360 )
Unknown register category &1 include &2 routine &3 in quantity conversion ( AJ 361 )
Not possible to balance rounding in quantity conversion ( AJ 362 )
No entry in &4 for logical register &1 from &2 to &3 ( AJ 363 )
Not permissible to change billing rounding from &1 to &2 ( AJ 365 )
Billing document &1 cannot be reversed after a period of &2 &3 ( AJ 366 )
Bill. doc. &1 end of bill. period &2 cannot be reversed due to archiving ( AJ 367 )
Document to be reversed (&1) cannot be found in file &2 ( AJ 368 )
Billing document &1 is in archiving index &2 ( AJ 369 )
Document &1 is already in archiving index ( AJ 370 )
Previous document &1 for document &2 is in archiving index ( AJ 371 )
Previous document &1 for billing document &2 cannot be determined ( AJ 372 )
"Temperature extra" indic. only poss. for thermal gas billing 01 and 02 ( AJ 373 )
"Pressure extra" indicator only possible for thermal gas billing 02 ( AJ 374 )
Curreny &1 is not a currency of the European Monetary Union ( AJ 375 )
Maintain the statistics groups in step &1 ( AJ 376 )
Can only choose "Temp. extra" with "Press. extra" (for ther. gas bill.02) ( AJ 377 )
&4 &1 is inconsistent: entry missing in table &2 ( AJ 378 )
Statistics group &1 is inconsistent: field &2 is not permissible ( AJ 379 )
&4 &1 is inconsistent: field &2 is not permissible ( AJ 380 )
&1 &2 has no update rules for Profitability Analysis ( AJ 382 )
&1 &2 has no update rules for UIS ( AJ 383 )
Level of operand group &1 is inconsistent ( AJ 384 )
Group hierarchy for operand group &1 is inconsistent ( AJ 385 )
Upper-level group &2 for operand group &1 was not found ( AJ 387 )
Operand &1 cannot be deleted ( AJ 388 )
Update not possible for operand &1 ( AJ 389 )
No device or register exists that is subject to a rental price ( AJ 390 )
Internal: error adjusting installation facts ( AJ 391 )
Internal: error occurred balancing rounding errors ( AJ 392 )
Statistics group &1 not permitted for variant &2 ( AJ 394 )
Billing line item &1 > maximum &2 ( AJ 395 )
Statistics group &1 does not exist ( AJ 396 )
Statistics group &1 not permitted for variant &2 ( AJ 397 )
Enter a value in the "Type of qty" field ( AJ 398 )
Quantity type only for variants that write posting-relevant b.line items ( AJ 399 )
Record &2 not found in the table ( AJ 400 )
Facts for rate &2 for fact group &1 are inconsistent ( AJ 401 )
Quantity entered for operand &1 is zero ( AJ 405 )
Division for the new contract is different from the reference ( AJ 406 )
No meter reading results were found for the billing order ( AJ 407 )
You chose several default value for measured pressure at tech. installat. ( AJ 409 )
There is exactly one default value for the technical device installation ( AJ 410 )
Combination of franchise fee procedure and operand not permitted ( AJ 412 )
The measured pressure &1 does not exist ( AJ 416 )
No FF group could be found in the interval from &1 to &2 ( AJ 417 )
In spec. procedure ZE you cannot enter determ. of GLDF and corr. of GLDF ( AJ 418 )
Error in determination of GLDF for equipment &1, register &2 ( AJ 419 )
Franchise fee price limit only permitted in category No franchise fee ( AJ 420 )
You can find expl. of field contents for radio buttons in the long text ( AJ 422 )
You are not allowed to enter a time category ( AJ 424 )
Reverse the billing documents that were created after the &1 billing doc. ( AJ 428 )
Do not suppress temperature calculation when Joule-Thomson effect is used ( AJ 429 )
The &1 document entered cannot be found ( AJ 430 )
Choose additional temperature calculation to take J-T effect into account ( AJ 433 )
Choose additional pressure calculation to take J-T effect into account ( AJ 434 )
Choose GasPr.det. to take J-T effect into account ( AJ 435 )
Enter a PrTempR-JT key to calculate J-T effect ( AJ 436 )
Only enter PrTempR-JT key if J-T effect is to be calculated ( AJ 437 )
Missing &1 franchise fee group in franchise contract ( AJ 440 )
Initial pressure cannot be determined for time period from &1 to &2 ( AJ 441 )
Special procedures are not permitted for temperature or pressure extra ( AJ 445 )
Inconsistency in billing - Contact SAP ( AJ 446 )
Key press./temp. f. J-T effect &1: no from-date less than or equal to &2 ( AJ 448 )
It is not possible to combine billing in advance and period-end billing ( AJ 449 )
A valid advance period cannot be determined ( AJ 451 )
Cannot bill in advance ( AJ 452 )
Enter a key ( AJ 455 )
Pressure drop for &1 key is zero ( AJ 456 )
Gas billing type must match type in reference ( AJ 460 )
Joule-Thomson effect is only possible with thermal gas billing 00 ( AJ 461 )
The gas allocation date &2 already exists for the &1 billing document ( AJ 462 )
Specify a rate type for weighting key &1 ( AJ 465 )
Specify a rate type for billing unit of measure &1 ( AJ 466 )
Maintain facts for RTP operands at rate level ( AJ 467 )
The last value does not match the one in the &1 calorific value procedure ( AJ 469 )
There is no executable schema step ( AJ 470 )
'Last value' cannot be combined with proration or calculation of average ( AJ 471 )
'Last value' in CV procedure &3 is unequal to value in VCF procedure &1 ( AJ 472 )
'Last value' in VCF proc. &1 is unequal to value in cal. val. proc. &2 ( AJ 473 )
Select a different billing order ( AJ 474 )
&1 document cannot be reversed for adjustment ( AJ 475 )
Billing quantities with mixed plus and minus signs is not permitted ( AJ 476 )
Control of billing in advance is not standard in the IF-ENDIF clause ( AJ 477 )
&1 deletion operand: Control of billing in advance is not consistent ( AJ 478 )
Enter the missing energy feeding volume for &1 calorific value district ( AJ 481 )
No entries in &2 table for &1 calorific value district ( AJ 482 )
Energy feeding volumes for &1 cal. val. district incompletely maintained ( AJ 484 )
&1 is not permitted as control for advance billing in &2 step ( AJ 486 )
If you want to transport &1 manually, please read the long text ( AJ 487 )
Rate determination for rate type &1 of rate category &2 does not exist ( AJ 488 )
Error in user exit for calorific value altitude test ( AJ 490 )
You Cannot Select Info Lines in Case of Back Billing in Step &1 ( AJ 491 )
Specify the number of output parameters for RTP interface &1 ( AJ 492 )
Select an output parameter for operand category &1 ( AJ 493 )
Register operand &1 exists several times in rate step &2 ( AJ 495 )
Profile value is missing for profile &1, date &2, time&3 ( AJ 496 )
&4 is zero in device &1, register &2 ( AJ 497 )
Error determining meter reading ( AJ 498 )
Error determining meter reading ( AJ 499 )
Enter a lower limit for the interval ( AJ 500 )
You chose more than one billing document ( AJ 501 )
The quantity base for price &1 is zero ( AJ 502 )
No profile value exists for profile &1 period &2 to &3 ( AJ 503 )
Error occured when opening profile &1 period &2 to &3 ( AJ 504 )
No register allocations for role &1 ( AJ 506 )
No register allocations for role &1 until &2 ( AJ 507 )
Billing document &1 already invoiced with invoicing document &2 ( AJ 508 )
In gas procedure &1 the VCF is missing from the VCF procedure &2 ( AJ 509 )
Volume correction factor is missing for register for period &2 to &3 ( AJ 511 )
Cannot maintain MeasPrPror/GasPrDeterm/GasPrCorr for thermal gas bill. &1 ( AJ 512 )
Not possible to take JT effect into account for thermal gas billing 03 ( AJ 513 )
Joule-Thompson effect is not taken into account for special procedures ( AJ 514 )
In gas procedure &1, &3 is missing from VCF procedure &2 ( AJ 515 )
You can only enter the RTP interface when interval counters are allowed ( AJ 517 )
Operand &1 only permissible for interval meter rates ( AJ 521 )
You cannot use RTP operand &1 as an output operand ( AJ 522 )
Rate does not contain RTP operands ( AJ 523 )
No interval meter rate allocated to rate type &1 and rate category &2 ( AJ 525 )
Cannot reset document number &1 due to re-billing &2 ( AJ 526 )
RTP interface &2 does not supply operand &1 ( AJ 527 )
Schema &1 contains steps for rate &2 in another sequence ( AJ 528 )
Fields will be hidden for the gross price ( AJ 529 )
Schema steps compared to sequence of rate &1 steps ( AJ 530 )
You cannot maintain all fields for dynamic period control ( AJ 531 )
Error &3 in &4 when accessing RTP component &1 period &2 ( AJ 532 )
Error &3 in &4 when accessing RTP component &1 event parameter &2 ( AJ 533 )
RTP component &1: Event parameter &2, event &3, access error &4 ( AJ 534 )
Incorrect call of adjustment reversal f. cust. change in doc. no. &1 ( AJ 535 )
Incorrect call of adjustment reversal for document number &1 ( AJ 536 )
Incorrect call of adjustment reversal for contract change for doc. no. &1 ( AJ 537 )
Select an output parameter for unit of measure &1 ( AJ 538 )
No further adjustment reversal possible for billing document &1 ( AJ 539 )
Cannot carry out meter reading unit replacement ( AJ 541 )
Cannot carry out meter reading unit replacement ( AJ 542 )
Doc. no. &1: Cannot cancel adjustment reversal ( AJ 543 )
Doc. no. &1: Adj. rev. (cust./cont. change) only poss. for zero bill ( AJ 544 )
Doc. no. &1: Error cancelling adjustment reversal ( AJ 545 )
Cancel doc. no. &1: Cannot cancel adjustment revers. (cust./cont. change) ( AJ 546 )
Doc. no. &1: Orig. doc. number for cancelling adjust. reversal missing ( AJ 547 )
Print. doc. &2 for billing doc. &1 has already been cancelled for billing ( AJ 548 )
Billing document &1 has not been invoiced correctly ( AJ 549 )
Document &1 has not been cancelled ( AJ 550 )
Doc. number &1: Cannot cancel adjustment reversal ( AJ 551 )
Contract &1 (doc. no. &2) does not fit contract &3 (doc. no. &4) ( AJ 552 )
Document &1: Print document &2 is more recent than print document &3 ( AJ 553 )
Specify a weighting key ( AJ 554 )
You cannot use a weighting key with the "Last value" procedure ( AJ 555 )
Doc. no. &1 (contract &2) has separate period-end billing ( AJ 556 )
Unknown value &1, domain &2, program &3, routine &4 ( AJ 558 )
Invalid value &1: ID &2, user exit &3, function &4 ( AJ 559 )
Invalid value &1: ID &2, routine &3, include &4 ( AJ 560 )
Document number &1 of contract &2: error during simulation run ( AJ 561 )
Contract &1: Error during re-billing (contract/customer change) ( AJ 562 )
Document no. &1: Adjustment reversal can only be partially canceled ( AJ 563 )
Install. &1, billing date &2: Bill. doc. &3, line item &4 inconsistent ( AJ 564 )
Unit of measurement &1, time &2-&3: Error in usage factor ( AJ 565 )
Doc. no. &1, installation &2, period &3-&4: Error cancelling usage factor ( AJ 566 )
Cannot determine usage factor for bill &1, operand &2 due to schema step ( AJ 568 )
Cannot determine usage factor (operand &1/&2 equals unit of measure &3) ( AJ 569 )
Conversion error: Date &1, time &2, time zone &3 to time zone &4 ( AJ 570 )
Schema step &1: Table layout &2 not possible for period-end billing ( AJ 571 )
Period-end billing rate &1 cannot be used ( AJ 572 )
Backbilling is not allowed in schema &1 ( AJ 573 )
Billing in advance control &1 is not valid ( AJ 574 )
Period control &1 is not allowed with dynamic period control ( AJ 575 )
Backbilling group &1 in step &2 is inconsistent ( AJ 576 )
Formula &1, paramater &2, time &3-&4: Cannot determine calculation mode ( AJ 577 )
Maintain the time slice generator in step &1 ( AJ 578 )
The gross price and net price have different zones in price group &4 ( AJ 579 )
Update type &1 not allowed with dynamic period control ( AJ 580 )
Gross group &1 is inconsistent ( AJ 581 )
Gross group &1 is not compatible with period control ( AJ 582 )
Step &1 has no gross group, but the gross line field is selected ( AJ 585 )
Step &1: Gross line and posting-relevant fields selected ( AJ 586 )
Gross group &1 is used for multiple rates ( AJ 588 )
No calculation mode for formula &1, parameter &2, event &3 ( AJ 589 )
Net lines for the gross price are missing in gross group &4 ( AJ 590 )
Net lines for the gross price are missing in gross group &4 ( AJ 591 )
Net lines for the gross price are missing in gross group &4 ( AJ 592 )
Step &1: Variant category &2 is not valid ( AJ 593 )
Billing document &1 contains an error in gross group &4 ( AJ 594 )
Internal: Differentiator missing in gross group &1 ( AJ 595 )
Internal: Gross group &2 has no gross price in billing document &1 ( AJ 596 )
Internal: Error reading weighting key &1 (&2 &3) ( AJ 597 )
The temperature area in installation &2 is missing for weighting key &1 ( AJ 598 )
Period category not filled in table IZWST ( AJ 600 )
Inconsistency in MR document &1, connector &2, log. register &3, date &4 ( AJ 601 )
Internal error: CSNO &1 not found in table &2 ( AJ 602 )
No proration due to incorrect schema setup for dynamic period control ( AJ 604 )
Error during dynamic billing reversal ( AJ 605 )
Gas procedure &1 is not valid ( AJ 612 )
Gas procedure &1 is not valid ( AJ 613 )
Error in user exit EXIT_SAPLEA01_006 ( AJ 616 )
DEMAND18 cannot process register operands with multiple registers ( AJ 617 )
Gas date must lie between the previous and the subsequent meter reading ( AJ 618 )
Document and contract have different currencies; conversion not possible ( AJ 619 )
The time slices of operand &1 are not identical ( AJ 623 )
No periods to be set up exist in schema &2 for category &1 ( AJ 624 )
An actual meter reading result must be followed by recalculation ( AJ 625 )
Error in enhancement EBIS0009: Price &1 not available in currency &2 ( AJ 626 )
Error in User Exit EXIT_SAPLEA01_007 ( AJ 627 )
Several rates (&3-&4) found for rate type &1 and rate category &2 ( AJ 628 )
Division &1 unsuitable for permissibility for waste management ( AJ 629 )
Special value assignment &2 of operand &1 is not valid ( AJ 632 )
Tax determination group &1 is inconsistent ( AJ 635 )
Simulation cannot be carried out from billing ( AJ 637 )
Billing schema already contains &1 steps ( AJ 640 )
Invoicing is not possible for contract account &1 ( AJ 641 )
Contract &1 is blocked for billing ( AJ 643 )
DPC ESTB: Meter reading result determination at start of &1 has errors... ( AJ 646 )
DPC ESTB: Meter reading result determination at end of &2 has errors ( AJ 647 )
The reason categories specified for dynamic per.ctrl &1 do not match up ( AJ 648 )
DPC ESTB: Meter reading result determination at start of &1 has errors ( AJ 649 )
You changed billing-specific data before the last billing (&1) ( AJ 650 )
The to-date for &1 has been adjusted ( AJ 652 )
Values exist in the reversal period for installation &1 , operand &2 ( AJ 653 )
DPC ESTB: Meter reading result determination at end of &2 has errors ( AJ 654 )
You cannot combine dynamic period ctrl &1 with budget billing amount ( AJ 655 )
DPC ESTB: Meter reading result determ. for previous period has errors ( AJ 656 )
DPC ESTB: Meter reading result determ. for previous period has errors ( AJ 657 )
Meter reading result determination for previous period has errors ( AJ 658 )
Previous period &1-&2 UNEQUAL to budget billing period &3-&4 ( AJ 659 )
You can only combine to-the-day air pressure with the daily procedure ( AJ 660 )
Manual reversal is necessary to obtain correct period-end billing ( AJ 661 )
Invalid value in field &1 and/or &2 routine &3 document number &4 ( AJ 662 )
DPC ESTB:BillOrd. Install. &1, SchBillDate &2, BillTrans. &3 not billable ( AJ 663 )
DPC ESTB: Category of current period is not unique ( AJ 665 )
DPC-ESTB: Original category of current period is not unique ( AJ 666 )
Document &1 -> print document &2 not reversed (chain &3) ( AJ 667 )
Billing doc. &1 (invoicing indicator incorrect in ERCHC) (start doc. &2) ( AJ 668 )
Adjust. reversal not executed for billing document &1 (start document &2) ( AJ 669 )
Device/register &1 date &2: multiple meter reading overflow ( AJ 672 )
Installation &1 time &2-&3: Error determining usage factor ( AJ 673 )
The billing document does not contain a document number: Contract &1 ( AJ 674 )
Billing class is inconsistent ( AJ 675 )
No values found for rate &1, rate fact group &2 ( AJ 676 )
Meter reading unit does not match rate category ( AJ 677 )
Error changing from rate category &1 to rate category &2 ( AJ 678 )
No categories of current period can be determined ( AJ 679 )
Rate change is only possible after dynamic backbilling ( AJ 680 )
Rate category change is only possible after meter reading on database ( AJ 681 )
Operand &1 is not a register operand ( AJ 683 )
You have not defined a season ( AJ 684 )
Operand &1 has an impermissible control for this variant ( AJ 685 )
Number of seasons is greater than the number of output operands ( AJ 686 )
End of the last simulation period is not clear ( AJ 688 )
Start date cannot be determined ( AJ 689 )
ERCHV anchor line not used for backbilling ( AJ 691 )
Document &1 preceding document &2 is in the archiving period ( AJ 692 )
Price &1 not available in currency &2 ( AJ 694 )
Discount/surcharge &1 not available in currency &2 ( AJ 695 )
Error in enhancement EBIS0009: Discount &1 not available in currency &2 ( AJ 696 )
Billing orders &1, &2, &3 cannot be deleted ( AJ 697 )
Installation cannot be changed ( AJ 712 )
Installation &1 is not available ( AJ 713 )
Specify an entry with from block 0 for currency &2, date &1 ( AJ 714 )
Zones cannot be defined for quantity-based prices ( AJ 716 )
Not possible to update operand &1 to the installation facts ( AJ 718 )
Div., billing class and price type can only be maintained when created ( AJ 719 )
The indicator set cannot be used for rate type &1 ( AJ 723 )
Operand &1 cannot be limited ( AJ 724 )
Dependent entries in the volume correction factor procedure table (TE685) ( AJ 725 )
Price &1 cannot be deleted or changed ( AJ 726 )
Discount type and category can only be entered for flat-rate scale prices ( AJ 728 )
Access date for customer-defined access procedure is missing ( AJ 731 )
Consumption type &1 is inconsistent with other data ( AJ 733 )
Select one of the currencies &2 ( AJ 734 )
Automation data: To-date comes before from-date ( AJ 735 )
Calculated amount is too large ( AJ 736 )
Interim billing cannot be executed ( AJ 737 )
Enter an installation ( AJ 738 )
Values for operand &1 must not be deleted ( AJ 739 )
Price &2 can only be used in the installation facts of installation &1 ( AJ 741 )
Price &2 can only be allocated to a product-related operand ( AJ 742 )
Installation &1 in price &2 is not the same as installation &3 ( AJ 743 )
Document &1 does not have a log ( AJ 747 )
Invoicing order missing for billing document &1 ( AJ 760 )
Calculation triggers already exist for profile &1 ( AJ 761 )
The calculated consumption is too high ( AJ 762 )
Extractions index cannot be deleted because archiving already started ( AJ 764 )
Change to group characteristics for installation &1 date &2 not permitted ( AJ 769 )
Inconsistent gas date for meter reading &1, device &2, register &3 ( AJ 788 )
Error in BAdI for price block adjustment ISU_BI_PR_BLOCK_ADJ ( AJ 790 )
Contract &2 billing document &1 does not belong to installation group ( AJ 793 )
Bill. order of inst. &1 with sched. bill date &2 does not belong to instG ( AJ 794 )
No text symbols ( program &1 language &2 <> 'D') found ( AJ 795 )
No text symbols found ( program &1 language &2 ) ( AJ 796 )
Documents/billing orders are missing from secondary installation &1 ( AJ 797 )
Billing period from sec. installation &1 does not match prim. inst. &2 ( AJ 798 )
Billing document missing for secondary installation &1 ( AJ 799 )
This variant enhances price &1 without adjusting the price block ( AJ 827 )
Secondary installation &1: Installation role changed ( AJ 836 )
Grouping type &1 has distribution type &2 ( AJ 837 )
Grouping type &1 has distribution-relevant installation role &2 ( AJ 839 )
Grouping type &1 installation role &2: Consumption-relevant ind. &3 ( AJ 841 )
Grouping type &1 installation role &2: Distribution-relevant indicator &3 ( AJ 842 )
Impermissible combination of indicators ( AJ 843 )
Grouping type &1 installation role &2: Operand &3 not permitted ( AJ 845 )
Target operand &1 is not permitted for supply using ERCHV ( AJ 846 )
Primary installation billing order: End of billing period not specified ( AJ 847 )
Secondary installation &1: Billing order must already be billed ( AJ 849 )
Billing order for primary inst. not found for secondary installation ( AJ 850 )
Cannot uniquely determine primary inst. billing order for sec. inst. ( AJ 851 )
Installation &1 is inconsistent ( AJ 852 )
Cannot uniquely determine primary inst. billing doc. for sec. inst. ( AJ 853 )
Distribution bill cannot be used with this billing method ( AJ 854 )
If indicator &1 or &2 is set, set indicator &3 as well ( AJ 855 )
Primary installation w. distribution: Document &1 cannot be ind. reversed ( AJ 856 )
Sec. inst.: Customizing does not permit individual reversal of doc. &1 ( AJ 857 )
Update error table ERCH: Document &1 for prim.inst document &2 for S.ins ( AJ 858 )
Impermissible call ISU_BILL_CANCELLATION for installation group reversal ( AJ 859 )
Programming error lock parameters: Call ISU_BILL_CANCELLATION ( AJ 860 )
Programming error lock table: Aufruf ISU_BILL_CANCELLATION ( AJ 861 )
Programming error when calling ISU_BILL_CANCELLATION ( AJ 862 )
Installation &1 is not a primary installation on &2 ( AJ 863 )
Sec. installation &1: Impermissible change to primary installation &4 ( AJ 864 )
Inst. Group: Reversal of doc.no. &1 (doc. no. &2 for PI) ended with error ( AJ 865 )
Reversal: Update error table ERCH: Document &1 for PI, doc. &2 for SI ( AJ 866 )
Billing document &1, contract &2 does not fit current contract &3 ( AJ 867 )
Update error: Secondary installation billing order &1 (doc. &2 for PI) ( AJ 869 )
Inst. group: Reversal of doc. no. &1 (doc. for PI) ended with error ( AJ 870 )
Child print doc. reversal: Doc. no.&1 (doc.no.&2 for PI) ended with error ( AJ 871 )
Child print document reversal: Doc.no. &1 (doc. for PI) ended with error ( AJ 872 )
Child print doc. reversal: Document number &1 (doc.no. &2 for prim. inst) ( AJ 873 )
Child print doc. reversal: Document no. &1 (doc. for prim. installation) ( AJ 874 )
Installation group: Reversal document no. &1 (doc. for primary inst.&2) ( AJ 875 )
Installation group: Reversal document number &1 (doc. for primary inst.) ( AJ 876 )
Incomplete selection for primary installation document &1 ( AJ 880 )
Billing order &1 (primary installation &2): Interval check not poss. ( AJ 884 )
Bill. order &1 (prim. inst. &2): End of bill. period outside interval ( AJ 885 )
Billing order for secondary installation &1 cannot be billed yet ( AJ 886 )
Error updating billing order for secondary installation &1 ( AJ 887 )
* ( AJ 888 )
Internal billing simulation for secondary inst.&1 cancelled with error ( AJ 889 )
Cannot determine reconciliation key ( AJ 890 )
Consumption information for negative consumption difference ( AJ 891 )
Billing document &1 for primary installation &2 is outsorted ( AJ 892 )
Billing document &1 for secondary installation &2 is outsorted ( AJ 893 )
Simulation document for secondary installation &1 is outsorted ( AJ 894 )
Outsorted billing docs for secondary installation lead to termination ( AJ 895 )
There are quantities with different plus/minus signs in operand &1 ( AJ 897 )
Quantity in operand &1 is zero ( AJ 898 )
The interval length for the interface and the profile do not match ( AJ 902 )
Transaction type &1 defined for activity &2 is in the wrong category ( AK 001 )
Transaction type &1 defined for activity &2 is not correct ( AK 002 )
Posting with transaction type not allowed ( AK 003 )
Business area does not exist ( AK 004 )
Asset is investment measure, transaction type not allowed ( AK 005 )
Asset is assigned to group asset, transaction type not allowed ( AK 006 )
Asset is a group asset: posting with transaction type not allowed ( AK 007 )
Posting not possible, system could not determine asset value date ( AK 008 )
No asset exists for the gain/loss posting ( AK 009 )
Posting of subsequent revenue is not allowed ( AK 010 )
Deliver a repayment amount for each currency type ( AK 201 )
Customizing error, contact your system administrator ( AK 501 )
Areas manage different currencies; transfer not possible ( AK 502 )
Transfer not possible due to the depreciation area definition ( AK 503 )
The areas have differing specifications for 'posting to general ledger' ( AK 504 )
Receiving area &1 does not manage APC; transfer not possible ( AK 508 )
Receiving area &1 does not allow reval. of APC; transfer not possible ( AK 509 )
Receiving area &1 does not manage inv. support; transfer not possible ( AK 510 )
Receiving area &1 does not manage ord. deprec; transfer not possible ( AK 511 )
Receiving area &1 does not manage spec. deprec; transfer not possible ( AK 512 )
Receiving area &1 does not allow unplanned deprec; transfer not possible ( AK 513 )
Receiving area &1 does not allow transfrd. reserves; transfer not poss. ( AK 514 )
Receiving area &1 does not allow reval. of deprec; transfer not possible ( AK 515 )
SAP ArchiveLink (no stored document found) ( AL 005 )
No active storage system maintained for & & (-> Customizing) ( AL 006 )
SAP ArchiveLink (no stored document found) ( AL 012 )
Control key &1 of operation &2 is intended for external processing ( ALM_AER 001 )
Error during writing to the database ( ALM_AER 003 )
Operation &1 cannot be confirmed ( ALM_AER 011 )
Order &1 must not be confirmed ( ALM_AER 012 )
An error occurred during the goods movement (see transaction COGI) ( ALM_AER 014 )
Material &1 with serial number requirement cannot be posted ( ALM_AER 017 )
Requested Debug Error. SyncBO & User &. ( ALM_ME 020 )
Report with SAVE_ID & could not be processed because of Maturity Band. ( ALM_US_BW 001 )
Datasource & uses incorrect naming convention. ( ALM_US_BW 020 )
Problems occured handling metadata for dictionary object &. ( ALM_US_BW 023 )
Datasource for Company Code Characteristic (BUKRS) is not supported. ( ALM_US_BW 055 )
Directory configuration could not be locked because of a system failure ( ALRT_CFG 111 )
Configuration started for technical scenario &2, configuration mode &3 ( ALRT_CFG_AUTOCONFIG 000 )
Data Provider Connector configured ( ALRT_CFG_AUTOCONFIG 046 )
Data Provider Connector configured with errors ( ALRT_CFG_AUTOCONFIG 047 )
No template assigned to managed object &1 (type &3) ( ALRT_CFG_AUTOCONFIG 048 )
Runtime to update the alerting infrastructure: &1 seconds ( ALRT_CFG_AUTOCONFIG 058 )
No extractor data for metric type &2 ID: &1 - metric type skipped ( ALRT_CFG_AUTOCONFIG 063 )
Activation mode: &2 ( ALRT_CFG_AUTOCONFIG 076 )
Duplicate hierarchy entries returned for template &1 (ID: &2) ( ALRT_CFG_AUTOCONFIG 087 )
Inconsistency in repository hierarchy: Parent event &1 does not exist ( ALRT_CFG_AUTOCONFIG 092 )
Inconsistency in repository hierarchy: Child event &1 does not exist ( ALRT_CFG_AUTOCONFIG 093 )
Inconsistency in repository hierarchy: Child metric &1 does not exist ( ALRT_CFG_AUTOCONFIG 094 )
Inconsistency in repository hierarchy: Parent ID &2 has event class &1 ( ALRT_CFG_AUTOCONFIG 095 )
Inconsistency in repository hierarchy: Child &2 ID has event class &1 ( ALRT_CFG_AUTOCONFIG 096 )
Inconsistency in repository: Parent metric &1 is not a metric group ( ALRT_CFG_AUTOCONFIG 097 )
Inconsistency in repository hierarchy: Event &1 is not in event hierarchy ( ALRT_CFG_AUTOCONFIG 098 )
Assigned template with ID &1 is not present in Repository. ( ALRT_CFG_AUTOCONFIG 119 )
Auto-configuration is disabled because of of major restructuring ( ALRT_CFG_AUTOCONFIG 158 )
The Directory data for the selected managed object is inconsistent. ( ALRT_CFG_AUTOCONFIG 166 )
Event hierarchy in template &1 is inconsistent, MEA with ID &2 not found ( ALRT_CFG_AUTOCONFIG 171 )
Transformation error during generation of data provider configuration XML ( ALRT_CFG_COLLECTOR 011 )
A task will be created in request &4 on saving the changes ( ALRT_CFG_REPOSITORY 014 )
Object is being edited in foreign system, which is not recommended ( ALRT_CFG_REPOSITORY 040 )
Alert for ungrouped metric must have no other metrics/events in hierarchy ( ALRT_CFG_REPOSITORY 108 )
Group &1 cannot be empty - it must have at least one sub-product ( ALRT_CFG_REPOSITORY 113 )
A group cannot contain another group as a sub-product ( ALRT_CFG_REPOSITORY 114 )
A group cannot contain both products and product versions as sub-products ( ALRT_CFG_REPOSITORY 115 )
Product cannot be deleted - at least one template still uses it ( ALRT_CFG_REPOSITORY 117 )
Assign the depreciation area ( ALSMEX 000 )
Assign sequence no., depreciation area, value date and transaction type ( ALSMEX 001 )
Assign identifier, company code, asset class and capitalization date ( ALSMEX 002 )
Field assignment & was created successfully ( ALSMEX 005 )
Upload of file & was successful ( ALSMEX 006 )
Not possible to goto the asset master record in test run ( ALSMEX 009 )
Master record field already assigned ( ALSMEX 011 )
No field assignments exist ( ALSMEX 015 )
Current operating system is not Windows, Excel upload not possible ( ALSMEX 016 )
Select a field assignment before executing the function ( ALSMEX 019 )
Invalid record type during import of CSV file ( ALSMEX 020 )
Fields of this record type cannot be used for normal master data ( ALSMEX 021 )
Fields of this record type cannot be used for normal master data ( ALSMEX 022 )
Fields of this record type cannot be used for depreciation area data ( ALSMEX 023 )
Fields of this record type cannot be used for transactions ( ALSMEX 024 )
Fields of this record type cannot be used for depreciation area data ( ALSMEX 025 )
Fields of this record type cannot be used for transactions ( ALSMEX 026 )
Fields of this record type cannot be used for depreciation area data ( ALSMEX 027 )
Fields of this record type cannot be used for transactions ( ALSMEX 028 )
Warning: The date format does not match the value in the input file ( ALSMEX 029 )
Warning: The date format does not match the value in the input file ( ALSMEX 030 )
Warning: date format may be incorrect ( ALSMEX 031 )
Warning: date format may be incorrect ( ALSMEX 032 )
Invalid symbol in amount field ( ALSMEX 033 )
CONVT_NO_NUMBER error when converting amount field ( ALSMEX 034 )
Invalid symbol in date field ( ALSMEX 035 )
Cannot convert field contents to sensible date ( ALSMEX 036 )
Not possible to execute in this GUI ( ALSMEX 038 )
Display of Crystal report &1 failed (error code &2 / &3). ( ALVHT 031 )
No suitable Crystal Report template exists ( ALVHT 032 )
Crystal Reports file &1 generated on frontend ( ALVHT 034 )
File download to frontend not successful (file name &1) ( ALVHT 038 )
Frontend component not found ( ALVHT 039 )
Crystal Reports not installed ( &1 &2 ) ( ALVHT 154 )
Seagate/SAP driver for Crystal Reports not found (&1 &2 &3 &4) ( ALVHT 155 )
Seagate Batch Server for SAP not found. &1 ( ALVHT 156 )
Error generating the control ( ALVHT 163 )
Operation not supported on this platform ( ALVHT 164 )
No ITS entry found ( ALVHT 201 )
Error in RFC connection &3 : &1 &2 ( ALVHT 202 )
Error in RFC connection (&1 &2 &3) ( ALVHT 203 )
Error in Crystal Reports installation (&1) ( ALVHT 218 )
Download authorization missing. (User &1). ( ALVHT 219 )
Spool parameter contains errors ( &1 ) (request &2) ( ALVHT 221 )
Fatal error writing into spool ( &1 ) (&2) ( ALVHT 222 )
Unable to set indicator, dialog indicator is set ( AM 003 )
Version indicator & is not defined ( AM 018 )
Version indicator & is not activated ( AM 019 )
Address could not be deleted as it is still used elsewhere ( AM 048 )
The specified reference is the only one and cannot be deleted ( AM 066 )
The specified reference is the only one and cannot be deleted ( AM 067 )
The address was not deleted; there are assignments to persons ( AM 068 )
The address version was not deleted; there are assignments to persons ( AM 069 )
Invalid characters in telephone number; characters ignored & ( AM 073 )
Invalid characters in fax number; characters ignored & ( AM 074 )
Invalid characters in extension; characters ignored & ( AM 075 )
Select one number as the standard number in communication type & ( AM 086 )
Title key & is not defined in language & ( AM 123 )
Enter a valid form of address ( AM 132 )
No valid titles maintained for language & ( AM 133 )
Field NAME_TEXT (converted name) deleted ( AM 149 )
You have no authorization for addresses in the group '&' ( AM 170 )
You are authorized to create, change and display ( AM 175 )
You have only display authorization ( AM 176 )
Data being maintained by user &; display only ( AM 180 )
You have no authorization for addresses in the group '&' ( AM 194 )
Contact person data was also changed for this person ( AM 197 )
Person data was also changed for this contact person ( AM 198 )
Enter the postal code of the PO box ( AM 213 )
Country key & is not defined ( AM 214 )
Enter a postal code ( AM 219 )
& attributes were applied ( AM 223 )
One attribute was applied ( AM 224 )
Enter city (if different) only in comb.with PO box or company postal code ( AM 225 )
The use of the last &1 characters in field &2 is restricted (&3 of &4) ( AM 228 )
Reason for Undeliverability & Is Not Valid ( AM 235 )
The address is created with country & ( AM 237 )
The use of the last &1 characters in field &2 is restricted (&3 of &4) ( AM 240 )
Assignment person-address deleted; person to other addresses assignment ( AM 262 )
Number range 01 for object ADRV does not exist or is not internal. ( AM 279 )
Valid owner object passed (field APPL_KEY) ( AM 281 )
Address cannot be maintained; entry in table TSADRV missing ( AM 287 )
Address maintenance cannot be called; error in table TSADRV ( AM 288 )
Address maintenance cannot be called; error in table TSADRV ( AM 289 )
Entry missing in TSADRV; new address maintenance cannot be called ( AM 290 )
Entry missing in TSADRV; new address maintenance cannot be called ( AM 291 )
Address maintenance cannot be called; error in table TSADRV ( AM 292 )
Address group & not defined; delete flag for address not possible ( AM 298 )
You cannot enter a note for the communication type. ( AM 305 )
Sequential number & already exists; entry in & ignored ( AM 320 )
No home address assigned ( AM 322 )
Some sequential numbers not specified; all numbers ignored ( AM 325 )
Assignment of communication type & comments to be inserted not unique ( AM 326 )
Communication type & serial numbers not specified in insert mode ( AM 327 )
Serial number & in comment not used in communication type & ( AM 329 )
No data maintained for standard communication type '&' ( AM 330 )
Other target address other than target addr. with independent comm. data ( AM 338 )
More than one ADDR1_TAB record was passed ( AM 342 )
No SMS service has been defined ( AM 347 )
System lock error ( AM 361 )
Key & is not defined as name format for country & ( AM 407 )
Name format & & is empty; cannot save ( AM 409 )
Application object & & is locked; update not possible ( AM 475 )
Time zone &1 is not valid in country &2 (multiple options) ( AM 482 )
There must be a number in the &2 place of the postal code &1 ( AM 666 )
There must be a number in the &2 place of P.O. box postal code &1 ( AM 667 )
There must be a number in the &2 place of company postal code &1 ( AM 668 )
A '-' must be in the &2 place of the postal code &1 ( AM 672 )
A '-' must be in the &2 place of the P.O. box postal code &1 ( AM 673 )
A '-' must be in the &2 place of the company postal code &1 ( AM 674 )
There must be a blank space in the &2 place of postal code &1 ( AM 675 )
There must be a blank space in the &2 place of P.O. box postal code &1 ( AM 676 )
There must be a blank space in the &2 place of company postal code &1 ( AM 677 )
There must be a letter in the &2 place of the postal code &1 ( AM 678 )
There must be a letter in the &2 place of P.O. box postal code &1 ( AM 679 )
There must be a letter in the &2 place of company postal code &1 ( AM 680 )
Use only digits in places &2 to &3 in postal code &1 ( AM 684 )
Use only digits in places &2 to &3 of the P.O. box postal code &1 ( AM 685 )
Use only digits in places &2 to &3 of the company postal code &1 ( AM 686 )
Use only digits in places &2 to &3 in postal code &1 ( AM 687 )
Use only digits in places &2 to &3 of the P.O. box postal code &1 ( AM 688 )
Use only digits in places &2 to &3 of the company postal code &1 ( AM 689 )
A '-' must be in the &2 place of the postal code &1 ( AM 690 )
A '-' must be in the &2 place of the company postal code &1 ( AM 692 )
The postal code &1 must have a length of &2, &3, or &4 ( AM 693 )
The P.O. box postal code &1 must have a length of &2, &3, or &4 ( AM 694 )
The company postal code &1 must have a length of &2, &3, or &4 ( AM 695 )
There must be a letter in the &2 place of the postal code &1 ( AM 696 )
There must be a letter in the &2 place of P.O. box postal code &1 ( AM 697 )
There must be a letter in the &2 place of company postal code &1 ( AM 698 )
There must be a number in the &2 place of the postal code &1 ( AM 706 )
There must be a number in the &2 place of P.O. box postal code &1 ( AM 707 )
There must be a number in the &2 place of company postal code &1 ( AM 708 )
There must be a blank space in the &2 place of postal code &1 ( AM 709 )
There must be a blank space in the &2 place of P.O. box postal code &1 ( AM 710 )
There must be a blank space in the &2 place of company postal code &1 ( AM 711 )
Use only digits in places &2 to &3 in postal code &1 ( AM 712 )
Use only digits in places &2 to &3 of the P.O. box postal code &1 ( AM 713 )
Use only digits in places &2 to &3 of the company postal code &1 ( AM 714 )
Enter a '0' in the place &2 of the postal code &1 ( AM 715 )
A '0' must be in the &2 place of the P.O. box postal code &1 ( AM 716 )
A '0' must be in the &2 place of the company postal code &1 ( AM 717 )
A '-' must be in the &2 place of the postal code &1 ( AM 718 )
A '-' must be in the &2 place of the P.O. box postal code &1 ( AM 719 )
A '-' must be in the &2 place of the company postal code &1 ( AM 720 )
The postal code &1 must have a length of between &2 and &3 ( AM 721 )
P.O. box postal code &1 must have a length of between &2 and &3 ( AM 722 )
Company postal code &1 must have a length of between &2 and &3 ( AM 723 )
There must be a number in the &2 place of the postal code &1 ( AM 724 )
There must be a number in the &2 place of P.O. box postal code &1 ( AM 725 )
There must be a number in the &2 place of company postal code &1 ( AM 726 )
The postal code &1 must have a length of &2 or &3 ( AM 727 )
The P.O. box postal code &1 must have a length of &2 or &3 ( AM 728 )
The company postal code &1 must have a length of &2 or &3 ( AM 729 )
Use only digits in places &2 to &3 in postal code &1 ( AM 730 )
Use only digits in places &2 to &3 of the P.O. box postal code &1 ( AM 731 )
Use only digits in places &2 to &3 of the company postal code &1 ( AM 732 )
A '-' must be in the &2 place of the postal code &1 ( AM 733 )
A '-' must be in the &2 place of the P.O. box postal code &1 ( AM 734 )
A '-' must be in the &2 place of the company postal code &1 ( AM 735 )
The postal code &1 must have a length of &2 or &3 ( AM 736 )
The P.O. box postal code &1 must have a length of &2 or &3 ( AM 737 )
The company postal code &1 must have a length of &2 or &3 ( AM 738 )
A '-' must be in the &2 place of the postal code &1 ( AM 739 )
A '-' must be in the &2 place of the P.O. box postal code &1 ( AM 740 )
A '-' must be in the &2 place of the company postal code &1 ( AM 741 )
The postal code &1 must have a length of &2 or &3 ( AM 742 )
The P.O. box postal code &1 must have a length of &2 or &3 ( AM 743 )
The company postal code &1 must have a length of &2 or &3 ( AM 744 )
The postal code &1 must have a length of &2 or &3 ( AM 745 )
The P.O. box postal code &1 must have a length of &2 or &3 ( AM 746 )
The company postal code &1 must have a length of &2 or &3 ( AM 747 )
Serious function module & call error ( AM 755 )
Number range interval & of object & is not internal ( AM 756 )
Address tables in client & not converted ( AM 757 )
XPRA must not be run online ( AM 764 )
Caution: Address conversion has long runtimes (OSS 82167) ( AM 771 )
There is no possible entries help for this field in the current system ( AM 821 )
Internal lock error (address can only be displayed) ( AM 845 )
Date '00.00.0000' was replaced by '01.01.0001' ( AM 874 )
Internal error - & call error ( AM 885 )
Application Check for ABAP Messaging Channels ( AMC_MESSAGE 000 )
Program &1 does not exist but maintained in application &2 and channel &3 ( AMC_MESSAGE 001 )
Program &1 in application &2 and channel &3 isn't transportable ( AMC_MESSAGE 002 )
Program &1 does not exist but maintained in local appl. &2 and channel &3 ( AMC_MESSAGE 003 )
Method &2 in implementation class &1 is not an AMDP method ( AMDP_BADI_WB_CHECK 003 )
Automatic transfer is not possible for asset &1 ( AMOC 001 )
Transfer on &1 is not possible for asset &2 ( AMOC 002 )
Transfer cannot be carried out for asset &1 ( AMOC 003 )
Asset values for asset & are not completely posted ( AMOC 004 )
&4 &1 changed; intracompany transfer posted with document number &2 ( AMOC 005 )
Transfer cannot be carried out for asset &1 ( AMOC 006 )
You are not authorized to unlock PP transactions ( ANWENDUNGSYSSWITCH 101 )
System not set as an SAP Retail system ( ANWENDUNGSYSSWITCH 102 )
CAUTION: PP transactions being unlocked. ( ANWENDUNGSYSSWITCH 105 )
All PP transactions were unlocked ( ANWENDUNGSYSSWITCH 106 )
Transaction &1 is not in table 020 - contact your system specialist ( AO 001 )
System setting for appropriation request is missing - please correct ( AO 002 )
Appropriation request type &1 does not exist - please correct ( AO 003 )
Number range &1 does not exist for app. request type &2 - correct ( AO 004 )
Number assignnt not internal for app. request type &2 -change Customizing ( AO 005 )
Enter an appropriation request number between &2 and &3 ( AO 006 )
Approp. request &1 already exists - enter a different number ( AO 007 )
Approp. requests are maintained in language &1 ( AO 008 )
Appropriation request &1 does not exist - correct your entry ( AO 012 )
Requesting company code &2 is copied from cost center ( AO 013 )
No company code is assigned to controlling area &1 ( AO 014 )
Controlling area &1 is not assigned clearly to a company code ... ( AO 015 )
Company code currency &1 was adopted ( AO 016 )
Controlling area currency &1 was adopted ( AO 017 )
Co. code currency &1 was adopted, since differnt CO area currency allowed ( AO 018 )
Distribution percentage rate &1 is larger than 100 - please correct ( AO 019 )
Distribution percentage rate &1 is not allowed - please correct ( AO 020 )
You have distributed &1 percent - please distribute 100 % ( AO 021 )
Cost center &1 was already used for distribution - please correct ( AO 022 )
Profit center and business area were already used - please correct ( AO 023 )
Enter mandatory partner - otherwise you cannot save ( AO 024 )
Variant number &1 is intended for estimated plan - please correct ( AO 025 )
Variant number &1 was already assigned - please correct ( AO 026 )
Variant number &1 will be deleted - enter a different number ( AO 027 )
Select a line for detailed processing ( AO 028 )
To copy a variant, you must select the variant you want to copy from ( AO 029 )
Variant &1 does not exist for approp.request &2 - correct your entry ( AO 032 )
No access index was entered - please check access ( AO 033 )
Enter an increment manually ( AO 034 )
Approp. request number &1 was already used for projects. Please correct. ( AO 036 )
Appropriation request &1 is being processed by user &2 ( AO 038 )
Approp. requests are being processed by user &1 ( AO 039 )
Contact system specialist - Problems with blocking ( AO 040 )
Select a variant for calling depreciation simulation data ( AO 041 )
Order &1 is in order category &2 - maintenance order. Please check. ( AO 043 )
Order &1 has the wrong order category &2 - please correct ( AO 044 )
Order &1 is already assigned to the approp. request - please correct ( AO 045 )
Order &1 is already assigned to approp. request &2 - please correct ( AO 046 )
Order &3 belongs to controlling area &2 instead of &1 - please correct ( AO 047 )
Order &1 is assigned to WBS element &2 - please correct ( AO 048 )
There is no variant, for which this procedure can be carried out -check ( AO 049 )
Order &1 does not exist - please correct ( AO 050 )
Variant &1 will be approved - rejection will be removed - please check ( AO 051 )
No variant was selected for procedure &1 - no change is made ( AO 052 )
No plan versions are defined - please check ( AO 053 )
Variant &1 does not exist - please correct ( AO 054 )
You did not select a long text type - please select ( AO 056 )
The entries for the variants for copying long texts are inconsistent ( AO 057 )
You did not enter an appropriation request number for copying long texts ( AO 058 )
You did not enter a reference approp. req. number for copying long texts ( AO 059 )
Reason for investment &1 was already used for the distribution. ( AO 060 )
Distribution percentage rate &1 is larger than 100 - please correct ( AO 061 )
Distribution percentage rate &1 is not allowed - please correct ( AO 062 )
Environ.inv. reason &1 was already used for distribution - please correct ( AO 063 )
Structure indicator &1 is blocked for new approp. requests - change ( AO 064 )
System error - Project for the approp. req. does not exist - Termination ( AO 065 )
System error - cannot create project &1 for coding mask - termination ( AO 066 )
Investment reason &1 does not exist - please correct ( AO 068 )
Environ. inv. reason &1 does not exist - please correct ( AO 069 )
Scale &1 does not exist - please correct ( AO 070 )
Version &1 is not defined - please correct ( AO 071 )
Version &1 cannot be used - please correct ( AO 072 )
Order is created when you save ( AO 073 )
Entry for fiscal year &1, program type &2, version &3 is not deleted --> ( AO 074 )
Parameters not transferred correctly (copying type &V1&) - check ( AO 076 )
No plan values were copied - please check ( AO 077 )
Equipment &1 does not exist - correct this ( AO 078 )
Assignment of asset &1 &2 will be deleted when you save ( AO 079 )
Assignment of equipment &1 will be deleted when you save ( AO 080 )
Asset &1 &2 &3 is already assigned - please check ( AO 081 )
Partner function &1 not defined in partner detrm. proc. &2 ( AO 082 )
Partner dtrm. proc. &1 for approp. requests does not exist ( AO 083 )
Project definition &1 was activated --> Detailed information ( AO 084 )
Project definition &1 was not activated - inform your system administ. ( AO 085 )
Maintain an order type for creating the order ( AO 086 )
Enter a responsible company code needed for creating the order ( AO 087 )
Maintain required field ( AO 088 )
You entered a unit of measure w/o entering a quantity - enter quantity ( AO 089 )
Quantity &1 was entered without a unit - enter a unit of measure ( AO 090 )
A currency was entered without an amount - enter an amount ( AO 091 )
Value &1 was entered without a currency - enter a currency ( AO 092 )
WBS element &1 does not exist - please correct ( AO 093 )
WBS elem. &3 belongs to controlling area &2 not &1 - please correct ( AO 094 )
WBS element &1 is not a top WBS element - please correct ( AO 095 )
WBS element &1 is already assigned to this approp. request - correct ( AO 096 )
WBS elem. &1 is already assigned to approp. request &2 - correct ( AO 097 )
Reference approp. request &1 does not exist - please correct ( AO 098 )
Approp. req. type &1 in reference &3 different from &2 - check ( AO 099 )
No authorization levels are defined - please check ( AO 150 )
Authorization levels do not have texts in language &1 - please check ( AO 151 )
Auth. levels do not have texts in master language &1 - please check ( AO 152 )
The versions do not have descriptions in language &1 - please check ( AO 153 )
The versions do not have descriptions in master language &1 - check ( AO 154 )
There is no description for approp. req. &1 variant &2 - please check ( AO 155 )
Select a variant for calling document management ( AO 156 )
Maintain the company code of the affected asset ( AO 157 )
You do not have authorization for function &1 ( AO 158 )
You do not have authorization for copying the new version ---> ( AO 159 )
Termination - no fields exist for screen selection ( AO 160 )
The old approval year &1 is after the new approval year &2 ( AO 161 )
Approval year &2 is missing in version &1 of program type &3 - check ( AO 162 )
Approval year &2 of version &1 is blocked - please correct ( AO 163 )
You made identical entries for the old version and the new version --> ( AO 164 )
The system cannot display planning for variant &1 ( AO 186 )
Variant &1 cannot be deleted - &2 status is active ( AO 187 )
Variant &1 cannot be deleted, since it is assigned to version &2 &3 ( AO 188 )
Variant &1 will be deleted when you save - please check ( AO 189 )
Approp. request &1 does not have any measures - no replacement made --> ( AO 190 )
WBS element &1 will be created when you save ( AO 191 )
Maintain the responsible company code for 'create WBS element' ( AO 192 )
Model order &1 does not exist - please correct ( AO 193 )
Model order &1 has an incorrect order category &2 - please correct ( AO 194 )
Approp. request &1 already exists - enter a different number ( AO 195 )
Approp. request number &1 is assigned internally - please correct ( AO 196 )
Equipment &1 is already assigned - please check ( AO 197 )
Incorrect system on function module for COPY parameter ( AO 198 )
System error &1 occurred in program &2 ( AO 201 )
not used ( AO 202 )
No authoriz. for approval level for plan vers. of &4 ( AO 204 )
Status does not allow cost planning on variant &1 ( AO 205 )
Status does not allow investment cost planning on variant &1 ( AO 207 )
Status does not allow planning of revenue on variant &1 ( AO 208 )
Planning of costs not allowed- planning lock on version for variant &1 ( AO 209 )
Planning of inv.costs not allowed-planning lock on version for variant &1 ( AO 210 )
Planning of revenue not allowed- planning lock on version for variant &1 ( AO 211 )
No plan profile found for appropriation request type &1 ( AO 212 )
The fiscal year variant for company code &1 was not found ( AO 213 )
The start and end date of planning could not be found in profile ( AO 214 )
Error while calculating the net present value ( AO 215 )
Error when calculating the internal rate of return ( AO 216 )
Error when calculating the payback period ( AO 217 )
No authorization for user status of &4 ( AO 218 )
The carry-forward indicator is set in more than one version. ( AO 219 )
Select only one line. ( AO 220 )
This selection level is not allowed here. ( AO 221 )
Use different partner functions ( AO 222 )
You can no longer change the control of number assignment ( AO 223 )
Critical area of number interval & reached (ENTER=Continue) ( AO 224 )
Last number of number range &1 is assigned (ENTER=continue) ( AO 225 )
No number can be assigned - contact your system specialist ( AO 226 )
Order &1 already exists and is now assigned ( AO 227 )
Another order is being created with order category &1 ( AO 228 )
Order &1 is identified as a preliminary project ( AO 229 )
Order &1 already exists and is already assigned ( AO 230 )
The system checked the data on the screen ( AO 231 )
Appropriation request type &1 is still being used ( AO 232 )
Value &2 does not exist for field &1 - correct ( AO 233 )
Value &2 does not exist for field &1 - correct ( AO 234 )
Not possible to delete approp. request &1 - project is active ( AO 235 )
The status does not allow deleting appropriation request &1 ( AO 236 )
Deleting app.request &4 not allowed - it is assigned to inv.prog. &1/&2 ( AO 237 )
Deleting app. request &2 not allowed due to assignment to inv. program ( AO 238 )
Deletion not possible, since variant &1 has a blocked version assignment ( AO 239 )
To delete the approp. request, use the 'save' function ( AO 240 )
Limited validation, since the system is not set to 'production' status. ( AO 241 )
Release is not allowed, since appropriation request &1 is not released ( AO 242 )
You do not have authorization for copying the variant assignments ---> ( AO 243 )
No preinvestment analysis figures are newly calculated ( AO 244 )
Preinvestment analysis figures were calculated again ( AO 245 )
No reference int. rates maintained for yield curve type &1 + currency &2 ( AO 246 )
No interest rate is maintained for reference interest rate &1 ( AO 247 )
Release is not allowed, since appropriation request &1 is not released ( AO 248 )
Changes to project definition not allowed due to approp. request &1 ( AO 249 )
Deletion is not allowed since appropriation request &1 exists ( AO 250 )
Partner function &1 cannot be used - correct ( AO 251 )
No changes were made to appropriation request &1 ( AO 252 )
The plan values are transferred to version &1 of the measure ( AO 253 )
The system cannot interpret change document for table &2 ( AO 254 )
There are no plan values on variant &1 ( AO 256 )
No plan values exist for combined costs or revenue ( AO 258 )
Transfer of plan values not possible - there are more than 2 measures ( AO 259 )
Release is not possible since there is no measure - check ( AO 260 )
Project definition &2 is being processed by user &1 ( AO 261 )
Combined costs are negative ( AO 262 )
&1: &2 ( AO 263 )
Sum of plan values larger than overall plan value ( AO 264 )
Inconsistencies were found in the plan data ( AO 267 )
Error in the calculation of the payback period ( AO 268 )
Error in call of AIA9 &1 &2 ---> contact your system administrator ( AO 269 )
Organizational units adopted automatically -> see long text ( AO 270 )
Error during transfer of plan values for &1 &2 ( AO 271 )
There is no plan profile in approp. request type &1 for plan maintenance. ( AO 272 )
No partner was entered for partner function &1. ( AO 273 )
No partner function is entered for partner &1. ( AO 274 )
Entries are missing for inv. program, approval year, inv.prog.position ( AO 275 )
You are not authorized to maintain plan values for variant &1 ( AO 276 )
Select a variant for plan value maintenance. ( AO 278 )
No authorization for &4 ( AO 279 )
In order to sort, select a field or position the cursor on a field ( AO 280 )
Original request &2 is assigned directly from alternate &1 ( AO 281 )
Controlling area &1 not same as &2 of original request &3. Correct. ( AO 282 )
Program type &1 not the same as &2 of original request &3. Please correct ( AO 283 )
Assignmt to original reqst &1 not possible due to status of app.req. &2 ( AO 284 )
Assignment to original req. &1 not allowed - overlap of versions &2 &3 ( AO 285 )
Alternate approp. request &1 is being processed by user &2 ( AO 287 )
For detailed processing of alternate request, select an alternate request ( AO 288 )
App. request &1 is an original app. request and cannot be deleted ( AO 290 )
Appropriation request cannot use itself as an original request ( AO 291 )
Division &1 was already used for the distribution - please correct ( AO 292 )
Material group &1 was already used for the distribution - please correct ( AO 293 )
Please create depreciation simulation data ( AO 295 )
Period &1 is not allowed ( AO 296 )
Internal rate of return cannot be calculated due to the order of data ( AO 298 )
Enter a number ( AO 299 )
Scale &1 does not exist - please correct ( AO 301 )
Priority &1 does not exist - please correct ( AO 302 )
Score &1 does not exist - please correct ( AO 303 )
Plant &1 does not exist - please correct ( AO 306 )
Plant &1 is not assigned to company code &2 - please correct ( AO 307 )
Location &2 does not exist in plant &1 - please correct ( AO 308 )
Company &1 does not exist - please correct ( AO 309 )
Company code &2 does not belong to company &1 - please correct ( AO 310 )
Country &1 does not exist - please correct ( AO 311 )
Reason for investment &1 does not exist - please correct ( AO 312 )
Environ. inv. reason &1 does not exist - please correct ( AO 313 )
Division &1 does not exist - please correct ( AO 314 )
For dummy record, do not change percentages to &1 ( AO 315 )
Activity &1 cannot be carried out during the mass change ( AO 316 )
Transaction &1 can only be carried out using Workflow ( AO 317 )
Material group &1 does not exist - please correct ( AO 318 )
Master data cannot be locked because of Workflow ( AO 319 )
There is no variant, for which activity &1 is possible ( AO 320 )
Make % distribution either to cost centers or to bus.area/profit center ( AO 321 )
No appropriation requests were entered ( AO 329 )
Plan values cannot be transferred since no measure is assigned ( AO 330 )
Field changes for field &2 &3 are not permitted by field selection ( AO 331 )
Missing authorization - You cannot delete variant &1 ( AO 332 )
You cannot use appropriation request &1 as a reference ( AO 333 )
Activity '&2' cannot be carried out because of alternate request ( AO 334 )
Variant &3: Completion date &1 is after the startup date &2 ( AO 335 )
Variant &3: Implementation start date &1 is after completion date &2 ( AO 336 )
Variant &3: Implementation start date &1 is after startup date &2 ( AO 337 )
Enter a number ( AO 338 )
Error: Approp. request &1 is not marked for deletion - please check ( AO 339 )
With change of cost center &3, business area changed from &1 to &2 ( AO 342 )
With change of cost center &3, profit center changed from &1 to &2 ( AO 343 )
Request. cost center a required field - profit ctr/bus. area insufficient ( AO 345 )
Requesting profit center a required field - cost ctr has no profit ctr ( AO 346 )
Requesting business area a required field - cost ctr has no business area ( AO 347 )
Requesting business area a required field - cost ctr has no business area ( AO 348 )
Requesting profit center is a required field - enter profit center ( AO 349 )
&1 % was distributed for environmental investment - check ( AO 356 )
&1 % was distributed for environmental investment - please correct ( AO 357 )
Deletion flag or indicator set for order &1 - assignment not possible ( AO 358 )
Deletion flag or indicator set for WBS &1 - assignment not possible ( AO 359 )
Asset class not the same as asset class &1 in investment profile &2 ( AO 366 )
Responsible cost ctr is required field - profit ctr/bus.area not enough ( AO 368 )
Responsible profit center is required field - no assignment in cost ctr ( AO 369 )
Responsible profit center is required field - enter a profit center ( AO 370 )
Responsible business area is required field - no assignment in cost ctr ( AO 371 )
Responsible business area is required field - enter business area ( AO 372 )
Entries for variant, version and approval year are contradictory ( AO 373 )
Choose a line with an entry in order to go to assets or equipment ( AO 375 )
To go to a measure, choose a measure ( AO 376 )
Measure is created when you save - display not yet possible ( AO 377 )
The deletion indicator is set for &1 - only display is possible ( AO 378 )
You did not limit by variant or version ( AO 383 )
Tab layout &1 is still assigned to appropriation request type &2 ( AO 384 )
Cannot maintain required field &1 using layout & of app. req. type &3 ( AO 396 )
Template &1 does not exist or is not usable in Sapscript ( AO 416 )
Template &1 does not exist or is not usable in Word ( AO 417 )
Template &1 does not exist or is not usable in Sapscript ( AO 418 )
Template &1 does not exist or is not usable in Word ( AO 419 )
Project definition &1 has deletion flag - creating WBS not possible ( AO 437 )
Error when creating PM order - return code: &1 - please check ( AO 455 )
Maintain work center for "create PM order" for order type &1 ( AO 458 )
Due to entry in row &1, total of overhead exceeds maximum amount ( AO 459 )
Due to entry in row &1, total of investment costs exceeds maximum amount ( AO 460 )
Due to entry in row &1, total of revenue exceeds maximum amount ( AO 461 )
Plan value in row &1 has more than &2 places before the decimal ( AO 462 )
Due to entry in row &1, total overhead/inv.costs exceeds maximum amount ( AO 463 )
Due to entry in row &1, annual total of overhead/inv.costs is too high ( AO 464 )
Preinvestment analysis figures cannot be updated ( AO 465 )
Assign the appropriation request with a coding mask ( AO 466 )
Transfer of plan values not possible for PM order &1 - check ( AO 467 )
Cost planning not allowed for &1 &2 - no transfer of plan values ( AO 468 )
&1 &2 is not a planning element --> transfer of plan values not possible ( AO 469 )
Project definition &1 is deactivated --> choose a different project ( AO 470 )
Maintain the responsible company code before creating order ( AO 471 )
The check of the plan values found inconsistencies ( AO 472 )
PM order type &1 is not for investments - correct your entry ( AO 473 )
No workflow approver - the applicant = the approver ( AO 474 )
No workflow approver - correct your entry ( AO 475 )
Plan data is not managed in the selected target version ( AO 476 )
Target version selected is marked for "exclusive use" ( AO 477 )
Structure indicator &1 for approp. requests not allowed - please correct ( AO 478 )
Errors occurred during calculation of preinvestment figures ( AO 479 )
No line items can be displayed for the selected variant ( AO 481 )
Internal rate of return and payback period cannot be calculated ( AO 483 )
Coding masks have different structures. Conversion not possible. ( AO 484 )
Reference &1 cannot be used at the moment --> try again later ( AO 485 )
Enter a plant first ( AO 486 )
You do not have authorization for orders of order type &1 in plant &2 ( AO 487 )
The responsible work center is invalid ( AO 488 )
Customizing setting missing for order type &1 or plant &2 ( AO 489 )
Error during number assignment - order cannot be created ( AO 492 )
Asset &1 &2 is not assigned (&3 row &4) ( AO 497 )
There is no reference date for preinvestment analysis figures ( AO 511 )
Status of appropriation request &1 does not allow changes ( AO 512 )
Table parameter &1 is not unique ( AO 517 )
Appropriation request type &1 does not allow assignment of orders ( AO 518 )
Appropriation request type &1 does not allow assignment of projects ( AO 519 )
Entering variant number only possible with external number assignment ( AO 521 )
Appropriation request number &1 is too long (max. 12 characters) ( AO 526 )
Internal field overflow: first delete and update investment costs ( AO 528 )
Internal field overflow: first delete and update overhead ( AO 529 )
Internal field overflow: first delete and update revenue ( AO 530 )
Annual total of cash flow too large due to entry in row &1 ( AO 531 )
Cash flow in year &1 exceeds maximum ( AO 532 )
Some specifications for asset are missing (&1 row &2) ( AO 533 )
&1% is distributed - enter a 100% distribution (&2) ( AO 536 )
Document assignment was not copied due to lack of authorization ( AO 546 )
Field &1 is not ready for input - no entry is possible ( AO 547 )
Distribution of &1 not allowed ( AO 548 )
Currencies in company codes &1 and &3 do not agree ( AO 549 )
You are not authorized for the activity ( AO 550 )
There are more hits than are displayed ( AO 551 )
Variant &3 is already assigned to version &1/ &2 ( AO 553 )
Start-up date on &1 is before completion on &2 - check ( AO 554 )
Non-allowed workflow recipient, only &1, &2, &3, &4 allowed ( AO 555 )
This transaction is obsolete, use transaction &1 instead ( AO 556 )
This transaction is obsolete and can no longer be used ( AO 557 )
Technical field overflow for approp. request &1 ---> see long text ( AO 559 )
Document assignments were not transferred ( AO 563 )
Document assignments were not transferred ( AO 564 )
The selected appropriation requests have different planning profiles ( AO 569 )
Appropriation request &1: Deletion indicator status already set ( AO 570 )
Appropriation request &1: Deletion flag not yet set ( AO 571 )
Appropriation request &1: There are alternates without deletion flag ( AO 573 )
Enter a value between 0 and &1 ( AO 581 )
Enter a key for the WBS element ( AO 583 )
Planning profile &1 does not allow planning in controlling area currency ( AO 587 )
Cost center &3 in company code &2 ( AO 588 )
Approver role &1 is simultaneously defined as applicant ( AO 589 )
First enter the implementation start date ( AO 603 )
Variant &1/&2 has cost estimate -transaction not possible ( AO 607 )
App. req. &1 has variant(s) with cost estimate - transaction not possible ( AO 608 )
WBS element &1 has cost estimate - not possible to adopt plan values ( AO 609 )
Variant &1 has cost estimate - no longer possible to adopt plan values ( AO 610 )
Order &1 has cost estimate - no longer possible to adopt plan values ( AO 611 )
Cost estimate not found ( AO 612 )
Implementation start date &1 not within planning interval &2 - &3 ( AO 613 )
Selected set of appropriation requests cannot be planned simultaneously ( AO 713 )
Enter a plan version and an approval year ( AO 718 )
Maximum number of selection options (&1) already reached ( AO 723 )
Selection list box number &1 already has a standard value ( AO 724 )
Enter position numbers within the interval from 1 to &1 ( AO 725 )
Choose a selection criteria using the entry help ( AO 726 )
Incorrect settings in system tables - inform SAP ( AO 727 )
Incorrect Customizing in table TAIF10 - make needed entries ( AO 728 )
Incorrect settings in system table - contact SAP ( AO 729 )
No data element name is defined for table field &1 - &2 ( AO 730 )
More than &1 appropriation requests meet your selection cirteria ( AO 732 )
Approp.request &1: Cumulative plan values larger than overall plan value ( AO 735 )
Appropriation request &1: Overhead costs are negative ( AO 736 )
Line items for combined costs are displayed, if there are any ( AO 738 )
Planning profile &1 (cost planng) does not exist for app.request type &2 ( AO 740 )
Planning profile &1 (rev. planng) does not exist for app.request type &2 ( AO 741 )
Planning interval cannot be determined from planning profiles ( AO 742 )
Planning profiles &1 and &2 have different currency settings ( AO 743 )
Changing the responsible company code no longer allowed ( AO_PLANNING 001 )
Changing the object currency no longer allowed ( AO_PLANNING 002 )
Changing the responsible company code no longer allowed ( AO_PLANNING 003 )
Changing the object currency no longer allowed ( AO_PLANNING 004 )
Planning not allowed - maintain a company code ( AO_PLANNING 005 )
Currency &1 cannot be used as transaction currency ( AO_PLANNING 007 )
Internal field overflow: first delete overall costs and then save ( AO_PLANNING 010 )
Internal field overflow: first delete investment costs and then save ( AO_PLANNING 011 )
Internal field overflow: delete revenue and save ( AO_PLANNING 012 )
Sum of overhead and investment costs exceeds maximum in year &1 ( AO_PLANNING 013 )
Cash flow in year &1 exceeds maximum amount ( AO_PLANNING 014 )
Sum of overhead costs exceeds maximum in year &1 due to entry ( AO_PLANNING 015 )
Sum of investment costs too large in year &1 due to entry ( AO_PLANNING 016 )
Sum of revenue exceeds maximum in year &1 due to entry ( AO_PLANNING 017 )
Sum of annual overhead/inv. costs exceeds maximum in year &1 due to entry ( AO_PLANNING 018 )
Sum of annual cash flows exceeds maximum in year &1 due to entry ( AO_PLANNING 019 )
Net present value cannot be calculated in object currency &2 ( AO_PLANNING 020 )
Transfer of plan values not possible due to different object currency ( AO_PLANNING 021 )
Transfer of plan values not possible due to different object currency ( AO_PLANNING 022 )
Different object currency on order &3 - plan value transfer not possible ( AO_PLANNING 023 )
Transfer of plan vals not possible - different object currency on WBS &3 ( AO_PLANNING 024 )
Currency changed from &1 to &2 - only display is possible ( AO_PLANNING 025 )
Currency changed from &1 to &2 - only display is possible ( AO_PLANNING 026 )
Versions have different exchange rate types - assignment not possible ( AO_PLANNING 028 )
Customizing entries not made - planning in controlling area currency ( AO_PLANNING 029 )
Easy Cost Planning is only possible for controlling area currency &1 ( AO_PLANNING 031 )
Selections inconsistent for variants, approval year, versions ( AO_PLANNING 102 )
App. request &1 variant &2: versions have different currency translation ( AO_PLANNING 103 )
App. req. &1 variant &2 version &4 assigned in approval year &3 ( AO_PLANNING 104 )
App. req. &1 variant &2 also assigned to version &4 in approval year &3 ( AO_PLANNING 109 )
No entries matching the selection criteria have been found ( AP 001 )
Inv. program has a different program type ( AP 002 )
Problems while blocking - inform your system specialist ( AP 014 )
User &1 is already using &2 ( AP 015 )
There is no responsible person with the number &1 ( AP 017 )
You cannot use position ID ( AP 018 )
Length of entry is not correct: &1 ( AP 019 )
Number of sections does not agree with edition: &1 ( AP 020 )
One section is too long: &1 ( AP 021 )
There is no number in one section: &1 ( AP 022 )
Coding mask &1 is blocked ( AP 023 )
Edit mask is not correctly defined ( AP 024 )
Program type &1 does not exist ( AP 025 )
Position ID &1 already exists in the hierarchy ( AP 026 )
Program position is not an end node ( AP 030 )
Error - function cannot be executed ( AP 031 )
Error - function cannot be executed ( AP 032 )
Change document: Error &1 occurred ( AP 033 )
Error - function cannot be executed ( AP 035 )
Enter a controlling area ( AP 036 )
Error - different controlling areas ( AP 037 )
Error - different controlling areas ( AP 038 )
Cap. investment program position not allowed for measure ( AP 039 )
Error - different currencies ( AP 040 )
Choose a valid row ( AP 041 )
Plant &1 does not exist ( AP 043 )
Valuation area &1 does not exist ( AP 044 )
Plant &1 does not belong to company code &2 ( AP 045 )
Company code &1 does not exist ( AP 046 )
It is not possible to select by assignment to an investment program ( AP 048 )
Program positions already exist for &1/&2 ( AP 049 )
Business area &1 does not exist ( AP 051 )
Fiscal year variants do not agree ( AP 053 )
Company area &1 does not belong to plant &2 ( AP 054 )
&1 &2 is already being processed ( AP 055 )
&1 &2 is already being processed ( AP 056 )
Program type &1 is still used in inv. program &2/&3 ( AP 057 )
Please enter initial element ( AP 058 )
Fiscal year &1 is not in the validity period ( AP 060 )
Order &1 is still assigned to an investment program ( AP 061 )
WBS element &1 is still assigned to an investment program ( AP 062 )
Error - Measures are already assigned to position &1 ( AP 063 )
Problems while blocking - inform your system specialist ( AP 064 )
Please specify budget category ( AP 065 )
No budget category found ( AP 066 )
Budget profile / plam profile &1 does not exist ( AP 067 )
Overall budget and/or annual budget cannot be processed ( AP 068 )
Please maintain the company code for depreciation simulation ( AP 070 )
There are no cap.inv. programs in the area entered ( AP 071 )
You cannot assign position ID &1 again (save first) ( AP 072 )
Error - position &1 already budgeted/planned ( AP 073 )
Deletion is not possible since budget values already exist ( AP 074 )
Enter program name and fiscal year ( AP 076 )
Enter the fiscal year. ( AP 077 )
Entering a WBS element does not make sense for several projects ( AP 078 )
WBS element &1 is not part of project &2 ( AP 080 )
Select valid field ( AP 081 )
Reassigning again is not possible - save first ( AP 082 )
No measures found ( AP 083 )
Error - function cannot be executed ( AP 084 )
Error - function cannot be executed ( AP 085 )
Error - Measures are already assigned to position &1 ( AP 086 )
Error - selection not clear ( AP 087 )
Error - function cannot be executed ( AP 088 )
Appropriation request &1 is still used in investment program ( AP 089 )
Error - selection not clear ( AP 090 )
Attention - budget values / plan values already exist ( AP 091 )
Error session &1 created - please process ( AP 092 )
Select positions first ( AP 093 )
Budget values were already distributed ( AP 094 )
You can no longer make changes ( AP 096 )
Changes are not passed on to lower levels ( AP 097 )
No further changes allowed to controlling area &1 ( AP 098 )
Sequence number &1 assigned more than once ( AP 099 )
System error occurred in program &1 [&2] ( AP 100 )
&1 total of percentages is greater than 100% ( AP 101 )
Order &1 is already budgeted or availability control is active ( AP 102 )
&1 total of percentages is less than 100% ( AP 103 )
Order &1 is not an internal order/maintenance order ( AP 104 )
Functional location &1 does not belong to controlling area &2 ( AP 106 )
Functional location &1 does not belong to company code &2 ( AP 107 )
Functional location &1 does not belong to business area &2 ( AP 108 )
Functional location &1 does not belong to cost center &2 ( AP 109 )
Functional location &1 does not belong to company area &2 ( AP 110 )
Functional location &1 does not belong to plant &2 ( AP 111 )
Error - No cap. investment program position selected ( AP 117 )
Assignment of measures or approp. requests is not allowed ( AP 118 )
Termination when internal number assignment used ( AP 119 )
No authorization: Activity = &1, Object type = &2, Object = &3 ( AP 120 )
Selecting by projects and WBS elements at the same time is not logical ( AP 123 )
When budget categories are used, budget distribution is not possible ( AP 124 )
Coding mask can no longer be created or changed ( AP 125 )
Special character "&" is still in use ( AP 126 )
Status profile &1 is not suited for investment programs ( AP 127 )
Copying a sub-tree is not possible ( AP 128 )
Budget category &2 in program type &1 could not be deleted ( AP 130 )
&1 budget categories could not be deleted ( AP 131 )
Program type could not be deleted ( AP 132 )
&1 program types could not be deleted ( AP 133 )
Edit screen could not be deleted ( AP 134 )
&1 coding masks could not be deleted ( AP 135 )
Availibility check selected w/o selecting appropriate values ( AP 136 )
You can no longer change the controlling area ( AP 139 )
Overall values are not provided for here ( AP 141 )
The "budget distribution" indicator is not set ( AP 142 )
Setting the "budget distribution" indicator is not permitted ( AP 143 )
Overall values are not permitted - budget distribution not possible ( AP 144 )
Budget category &2 for program type &1 is not used in Customizing ( AP 145 )
Budget categories are not defined for program type &1 ( AP 146 )
Fiscal year change was already carried out for inv. programs ( AP 147 )
Distributing annual values not possible w/o distributing overall values ( AP 151 )
Budget distribution is not possible when budget categories are used ( AP 152 )
Error - Budget was already distributed to measures ( AP 155 )
Budget categories are assigned to a total of &% ( AP 157 )
Error: The total of the assignment equals &% ( AP 158 )
Assignment to the same program in different approval years ( AP 160 )
Both multiple assignment and budget distribution not possible at once ( AP 161 )
This combination is not valid ( AP 163 )
&1/&2 does not manage budget categories ( AP 164 )
Budget category percentages are not complete ( AP 165 )
Edit ID can have a maximum of &1 characters ( AP 166 )
Edit ID must have exactly &1 characters ( AP 167 )
Total length is too long ( AP 168 )
Plan version &1 does not exist for approval year &2 and program type &3 ( AP 169 )
Plan version &1 is blocked for approval year &2 and program type &3 ( AP 170 )
You can only select by choosing exactly one object type ( AP 171 )
Deletion is not possible since budget was already distributed ( AP 172 )
Measures for app. request already budgeted, or avail. control active ( AP 173 )
Error - program type not allowed by budget profile ( AP 174 )
Program type not allowed according to budget profile of measure ( AP 175 )
Program type is not allowed based on approp. request ( AP 176 )
Program type not allowed according to budget profile of measure ( AP 177 )
There is no plan version in the selected area ( AP 179 )
No plan version for carryforward specified ( AP 180 )
Plan version &1 is not allowed ( AP 181 )
Plan versions are ignored - plan version 0 used ( AP 182 )
You can no longer make changes ( AP 183 )
Enter approval year for approp. requests ( AP 184 )
Creating subordinate positions not possible - see long text ( AP 186 )
Function is not possible - see long text ( AP 187 )
App. request has already been replaced by measure(s) ( AP 188 )
Percentage is ignored ( AP 189 )
&1/&2 does not exist - first open a new approval year ( AP 190 )
Next higher WBS element is already assigned to a program position ( AP 192 )
Subordinate WBS element is already assigned to a program position ( AP 193 )
WBS element &1 is already budgeted or availability control is active ( AP 194 )
Error - function cannot be executed ( AP 195 )
Higher-level WBS element &1 is account assignmt element ( AP 196 )
Next higher WBS element already has its own budget ( AP 197 )
Next higher WBS element already has its own budget ( AP 198 )
Order &1 does not exist ( AP 200 )
Currency &1 is not allowed for program position ( AP2 001 )
'Role in hierarchy' field: Entry &1 not possible, see long text ( AP2 002 )
'Role in hierarchy' field: Entry &1 not possible, see long text ( AP2 003 )
Reassigning &1 below &2: roles in the hierarchy are incompatible ( AP2 004 )
Currency can no longer be changed ( AP2 005 )
Attaching/detaching measures and app.reqs not possible (assignment lock) ( AP2 006 )
Object currency differs from position &3 of &1/&2 ( AP2 008 )
This combination of indicators does not make sense, refer to long text ( AP2 009 )
Order &1 is already assigned ( AP 201 )
Rollup of old meas./app.req. only possible with full investment program ( AP2 010 )
Not possible to translate completely to the reporting currency &1 ( AP2 011 )
You are not allowed to take back the entry ( AP 202 )
WBS element &1 does not exist ( AP 203 )
WBS element &1 is already assigned ( AP 204 )
You can only assign WBS elelments from level 1 ( AP 205 )
Budget category &1 not available ( AP 206 )
An assignment already exists ( AP 207 )
Measure originates in a different logical system ( AP 208 )
Order &1 is already assigned ( AP 209 )
WBS element &1 is already assigned ( AP 210 )
Appropriation request &1 does not exist ( AP 212 )
Budget category still in use ( AP 213 )
Appropriation request &1 is already assigned ( AP 219 )
Appropriation request &1 is already assigned ( AP 220 )
Plan/budget is not carried forward consistently ( AP 221 )
Reassignment not possible - save first ( AP 222 )
Assignment not possible since measures are already assigned ( AP 223 )
Assignment is not possible since approp. request is already assigned ( AP 224 )
Assignment already exists - you cannot make assignment again ( AP 225 )
Function is no longer possible ( AP 226 )
Carryforward from current measures/app.requests is final! ( AP 227 )
New assignment no longer possible after fiscal year change ( AP 228 )
Error - function cannot be executed ( AP 231 )
Distribution to only one position - reassignment is not possible ( AP 235 )
Caution: Updating the carryforward for &1/&2 is required ( AP 236 )
The length of your entry for &1 is longer than allowed length &2 ( AP 238 )
For operator &1 entry allowed only in 'from' field ( AP 239 )
Measures already assigned to position &1 - cannot assign lower positions ( AP 242 )
Not possible to add new positions here - see long text ( AP 243 )
Not possible to add new positions here - see long text ( AP 244 )
Measure is not 100% assigned - measure assignment cannot be deleted ( AP 245 )
Assignment is not possible since approp. request is already assigned ( AP 249 )
Caution: Total budget is less than overall budget ( AP 250 )
Assignment not possible since measures are already assigned ( AP 251 )
Planning lock on WBS element &1 in assigned investment program ( AP 253 )
Lack of authorization for WBS element &1 in assigned investment program ( AP 254 )
Percentage rate is not allowed to be 0 ( AP 255 )
Percentage rate is not allowed to be 0 - use deletion function ( AP 256 )
Not possible to change the assignment ( AP 257 )
Planning lock on order &1 in assigned investment program ( AP 258 )
Lack of authorization for order &1 in assigned investment program ( AP 259 )
Appropriation request &1 was already replaced by measure ( AP 260 )
Plan values exist - assignment not possible due to planning lock ( AP 261 )
Plan values exist - assignment not possible due to lack of authorization ( AP 262 )
No hierarchy of organizational units has been maintained ( AP 268 )
&1 &2 is already being processed ( AP 269 )
&1 has to remain assigned to a program position ( AP 270 )
Special characters not allowed next to each other in coding mask ( AP 272 )
Coding mask cannot end with a special character ( AP 273 )
Separate numeric from alphanummeric segments by a special character ( AP 275 )
Only single assignments are allowed when using budget distribution ( AP 276 )
Multiple assignments are not allowed ( AP 277 )
Only supplements are allowed for carried-forward measures ( AP 279 )
Program name and approval year have to be unique ( AP 280 )
&1 has to remain assigned to a program position ( AP 281 )
Overall budget exceeded by &1 &2 ( AP 286 )
Annual budget &3 exceeded by &1 &2 ( AP 287 )
Caution: It may be necessary to update carryforward for &1/&2 ( AP 289 )
Company code &1 does not belong to controlling area &2 ( AP 290 )
All possible corrections not carried out ( AP 291 )
Controlling area &1 has different fiscal year variant &3 from &2 ( AP 292 )
&1 not allowed to be assigned to any program pos. (due to screen layout) ( AP 293 )
Save changes first ( AP 295 )
Update carryforward values to new approval years ( AP 296 )
Reassignment no longer possible after fiscal year change ( AP 297 )
Error when importing the data from memory ( AP 300 )
Error when importing the cap. inv. program from the memory ( AP 301 )
Characteristics "inv.prog.position" and "inv.prog.leaf" selected. ( AP 302 )
Neither "position characteristic" not "measure characteristic" selected. ( AP 303 )
Partner function not specified as unique. ( AP 304 )
Characteristic for partner function not selected for report. ( AP 305 )
Partner was not specified as unique. ( AP 306 )
Cannot display possible entries because partner function not specified. ( AP 307 )
You are only allowed to use one consolidation group in a report. ( AP 308 )
&1 not in customer name range (YY oder ZZ), no characteristic generated ( AP 311 )
Characteristic &1 is automatically checked against table &2 (field &3) ( AP 315 )
Characteristic &1 is not checked automatically ( AP 316 )
Characteristic &1 automatically checked against fixed values of domain &2 ( AP 317 )
Texts for characteristic &1 determined from fixed values of domain &2 ( AP 318 )
Texts for characteristic &1 determined from table &2 (fields &3 &4) ( AP 319 )
Texts for characteristic &1 not determined automatically ( AP 320 )
Characteristic &1 is tied to characteristic &2 ( AP 321 )
Characteristic &1 can only be changed manually ( AP 322 )
Characteristic &1 was deleted ( AP 323 )
A key figure has not yet been assigned to object type &1 (&2). ( AP 350 )
There is already a scale with this lower value limit. ( AP 351 )
Enter an allowed object type. ( AP 352 )
Scale &3 does not exist. ( AP 353 )
Key figure ID could not be deleted ( AP 354 )
&1 key figure IDs could not be deleted. ( AP 355 )
Scale could not be deleted. ( AP 356 )
&1 scales could not be deleted. ( AP 357 )
No object type chosen for data selection ( AP 501 )
Sender structure maintenance/EIS aspect assignment cancelled. ( AP 502 )
No controlling area found. ( AP 503 )
No capital investment program positions found. ( AP 504 )
Test run completed. ( AP 505 )
No data selected. ( AP 506 )
One EIS value type was assigned several times. ( AP 507 )
Error in the EIS field catalog for aspect &1. ( AP 508 )
Information for aspect &1 missing from the EIS field catalog. ( AP 509 )
Fields &2 for deletion are missing in aspect &1. ( AP 510 )
No transfer rules found for sender structure &1. ( AP 511 )
No aspect defined for selection report &1. ( AP 512 )
No partner systems are set for selection report &1. ( AP 513 )
Error in the transfer rules for sender structure &1. ( AP 514 )
Selection program &1 ended at user's request. ( AP 515 )
No EIS value type specified. ( AP 516 )
Error occurred in transfer structure/transfer rules. ( AP 517 )
Object class for program &1/&2 is not 'investment'. ( AP 518 )
Indic. for CapInvProgr. "including measures" and "only measures" set. ( AP 519 )
No authorization for data collection in controlling area &1. ( AP 520 )
Field selection does not allow assignment from WBS element ( AP 521 )
Valuation view &2 is not defined in controlling area &1 ( AP 522 )
&1: Budget category percentages for &2/&3 not allowed ( AP 600 )
&1: Budget category percentages not entered for &2/&3 ( AP 601 )
Point of entry position not allowed due to multiple assignment to &1/&2 ( AP 602 )
Order &1 is still assigned to an investment program ( AP 661 )
WBS element &1 is still assigned to an investment program ( AP 662 )
Appropriation request &1 is still used in investment program ( AP 689 )
Language does not exist. ( AP 803 )
Position &1: 'Role in hierarchy' field can only be set/changed online ( APBAPI 053 )
Invalid element ID '&' ( APB_FPM_CONF 051 )
Value & does not fit the specified CSS sizes ( APB_FPM_CONF 055 )
Edit mode disabled. Original language is & ( APB_FPM_CONF 077 )
Edit mode disabled via BAdI implementation ( APB_FPM_CONF 078 )
Table model should be based on standard table type ( APB_FPM_CONF 079 )
Enter a valid property name and value ( APB_FPM_CONF 083 )
Component FPM_CHART_UIBB is deprecated ( APB_FPM_CONF 085 )
Configuration is built dynamically by feeder class & ( APB_FPM_CONF 141 )