Messages

Complete Message Docu Documentation From IHC307 up to J0064

This documentation is copyright by SAP AG.
Count: 3544 Skipped: 9
Message Docu
Description
Errors during upgrade. Customizing is incorrect ( IHC 357 )
There are warnings from upgrade. Check Customizing ( IHC 358 )
Inconsistency between statemt & new starting balance and last end balance ( IHC 411 )
Sending back status has not been enabled for logical system &1. ( IHC 576 )
Payment order &1 cannot be archived due to its status ( IHC 800 )
Transaction type &2 is not permitted in bank area &1 ( IHC_GUI_MSG 022 )
Domestic payment: Select a bank with country & ( IHC_GUI_MSG 086 )
The amount length for this field has exceeded the maximum allowed size ( IHC_GUI_MSG 667 )
The entry for the functional location can only be made in a display ( IHREP 001 )
The selection could not be made ( IHREP 002 )
Selected statuses for "Status inclusive" do not exist for order operation ( IHREP 004 )
Selected statuses for "Status inclusive" do not exist for order header ( IHREP 005 )
No e-mail address maintained; inform your system administrator ( IIA 001 )
Problem &1 is locked; switching to display mode ( IIA 005 )
Knowledge base not compiled; inform your knowledge administrator ( IIA 010 )
Escalation request sent to agent ( IIA 052 )
PMIS period cannot be determined ( IK 000 )
No currency specified for cost display ( IK 003 )
No costs and revenue determined for order & ( IK 004 )
No cost profile exists for maintaining costs ( IK 006 )
No allocation to key figures exists: Key fig.value cannot be determined ( IK 007 )
No values determined in currencies (&,&): Costs cannot be displayed ( IK 010 )
Entry of negative costs not allowed: Maintain revenue if necessary ( IK 011 )
Entry of negative revenue not allowed: Maintain costs if necessary ( IK 012 )
No conversion currency from & to & exists on & ( IK 013 )
Order & has no currency: Costs cannot be maintained/displayed ( IK 015 )
Filed overflow occurred during conversion from & & to & ( IK 018 )
Date & is incorrect for period determination ( IK 019 )
Fiscal year variant & not found ( IK 020 )
fiscal year variant & not found for fiscal year & ( IK 021 )
Estimated costs version cannot be deleted/changed ( IK 202 )
Database error during estimated costs version update ( IK 204 )
No estimated costs version available: cost estimation not possible ( IK 206 )
No dependent entries can be maintained for estimated costs version ( IK 207 )
Estimated costs version already exists ( IK 208 )
&1 &2 &3 &4 ( IKB 000 )
Error occurred while loading navigation tree ( IKB 004 )
Enter solution number ( IKB 010 )
Solution type & not defined ( IKB 013 )
Number range for solution not maintained ( IKB 014 )
Code & does not exist ( IKB 016 )
Code Group & does not exist ( IKB 017 )
Method & is not implemented ( IKB 024 )
Object & & does not exist ( IKB 025 )
Invalid object category (Status Management) ( IKB 028 )
Status object already exists ( IKB 029 )
Invalid status profile ( IKB 030 )
Invalid object number (Status Management) ( IKB 031 )
Invalid new object number (Status Management) ( IKB 032 )
Invalid old object number (Status Management) ( IKB 033 )
Status number already exists ( IKB 034 )
Status object does not exist (Status Management) ( IKB 035 )
Catalog type & does not exist ( IKB 045 )
Problem code catalog must have catalog category & ( IKB 049 )
Notification & does not exists ( IKB 050 )
Location catalog must have catalog category & ( IKB 051 )
Cause catalog must have catalog category & ( IKB 052 )
Task catalog must have catalog category & ( IKB 053 )
Symptom type & not defined ( IKB 101 )
Number range for symptom not maintained ( IKB 102 )
Symptom status & does not exist ( IKB 104 )
Application area & does not exist ( IKB 105 )
Validation category & does not exist ( IKB 106 )
Record already exists with & language ( IKB 109 )
Symptom category & does not exist ( IKB 110 )
Catalog type & does not exist ( IKB 111 )
Invalid from & to & dates ( IKB 112 )
Duplicate entry ( IKB 122 )
Empty symptom type, no catalog will be loaded ( IKB 124 )
Failure in searching & ( IKB 126 )
Problem action box not customized correctly; inform system administrator ( IKB 129 )
Solution action box not customized correctly; inform system administrator ( IKB 130 )
Not possible to change problem type of problem &3 from &1 to &2 ( IKB 150 )
Problem code must belong to catalog &1, not &2 ( IKB 151 )
Location must belong to catalog &1, not &2 ( IKB 152 )
Damage must belong to catalog &1, not &2 ( IKB 153 )
Cause must belong to catalog &1, not &2 ( IKB 154 )
Not possible to link objects of type &1 (&3) to problems of type &2 ( IKB 155 )
Task must belong to catalog &1, not &2 ( IKB 156 )
No problems can be displayed with your information security profile &1 ( IKB 407 )
Profile &1 is used and cannot be deleted; choose Profile -> List Usage ( IKB 411 )
Not possible to save profile &1 because it is empty ( IKB 412 )
You are not authorized to maintain profiles ( IKB 415 )
No solutions can be displayed with your information security profile &1 ( IKB 419 )
No problems can be displayed with your information security settings ( IKB 420 )
No solutions can be displayed with your information security settings ( IKB 421 )
Attributes list contains redundant entries; delete the redundant entries ( IKB 422 )
Specify legacy system ID ( IKB 802 )
Specify a language key in all long text table lines ( IKB 805 )
No business objects can be linked to problems of problem type & ( IKB 807 )
Business objects of type & cannot be linked to problems of type & ( IKB 808 )
No business object types have been specified for problem type & ( IKB 809 )
Problem & cannot be deleted ( IKB 828 )
Not yet possible to use XIF or MW to change existing problems/solutions ( IKB 850 )
User &1 is editing functional location &2 ( IL 098 )
User &1 is editing reference location &2 ( IL 099 )
Superior location & has not yet been saved ( IL 107 )
There are several locations with sortfield = & ( IL 108 )
Superior location & has not yet been saved ( IL 109 )
'Install equipment' must be allowed if 'Single installation' requested ( IL 132 )
Superior functional location goes against the generic name or structure ( IL 133 )
Superior functional location not allowed (recursivity) ( IL 134 )
At FunctLoc. & there are & pieces of equip. installed already ( IL 137 )
Functional location address not maintained ( IL 138 )
The superior locations from location & are defined retrospectively ( IL 139 )
Authorization group & could not be transferred ( IL 188 )
Authorization group & could not be transferred from the reference copy ( IL 189 )
Enter copy reference ( IL 193 )
Enter reference location ( IL 194 )
Enter new functional location ( IL 195 )
&1 locations disregarded because of the name structure ( IL 196 )
FunctLocation & disregarded on account of the name structure ( IL 197 )
Superior functional location & does not exist (Edit --> F9 again) ( IL 199 )
Save the superior functional location & first ( IL 200 )
&1 locations already existed ( IL 202 )
&1 locations already existed -> Renaming not possible ( IL 203 )
&1 locations have already been created, renaming not possible ( IL 204 )
&1 location labels could not be converted ( IL 205 )
Functional location was overwritten and saved without checking ( IL 212 )
Lines were deleted in a forbidden way and saved immediately ( IL 213 )
Category & not defined for functional locations ( IL 300 )
Category & not supported for reference functional locations ( IL 301 )
No reference location defined --> data transfer not possible ( IL 302 )
No superior functional location defined --> data transfer not possible ( IL 303 )
Change to cat. & not poss.: partner determ. procedure different ( IL 304 )
No change documents generated for type & ( IL 305 )
The FunctLoc.will become the uppermost FunctLoc. in its own hierarchy ( IL 311 )
You will explode the allocation to the reference location ( IL 313 )
Data will be copied from the new superior functional location ( IL 314 )
Data will be copied from the new reference location ( IL 315 )
Data was copied from the superior FunctLocation and the RefLocation ( IL 316 )
Data was copied from the superior functional location ( IL 317 )
Data was copied from the reference location ( IL 318 )
Data copied to & FunctLoc(s) and & piece(s) of equip. ( IL 350 )
Data copied to & RefLocs, & FunctLocs and & pieces of equip. ( IL 351 )
Data was copied to & pieces of equipment ( IL 352 )
Data was transferred to & measuring points ( IL 354 )
Data copied to &1 RefLocs, &2 FunctLocs, &3 pcs. equip., 4& MeasPoints ( IL 355 )
Functional location & still has no status ( IL 400 )
Reference functional location & does not have a status ( IL 401 )
Check user status ( IL 402 )
The status profile of the location must be changed manually if necessary ( IL 403 )
Functional location & has a deletion flag. Can only be displayed ( IL 414 )
RefFunct. location & has a deletion flag. Can only be displayed ( IL 415 )
The superior location & is inactive ( IL 416 )
The superior location & is flagged for deletion ( IL 417 )
The superior RefFunctLocation & is flagged for deletion ( IL 418 )
Equipment &2 is still installed at location &1 ( IL 420 )
Check status of subordinate location &2 ( IL 421 )
Check status of subordinate reference location &2 ( IL 422 )
The assigned functional location &2 is not flagged for deletion ( IL 423 )
Labeling systems for functional locations do not exist ( IL 500 )
System settings for alternative labeling do not exist ( IL 501 )
Not all functional locations could be processed ( IL 502 )
Alternative labels for functional locations are not active ( IL 505 )
Not all changes could be saved ( IL 507 )
Labeling system &1 does not exist ( IL 510 )
&1 is a historical label of location &2 ( IL 511 )
Label &1 is already being used in labeling system &3 ( IL 512 )
The labeling system cannot be changed at the moment ( IL 513 )
Alternative labels for functional locations are not active ( IL 514 )
No functional locations were selected based on the criteria entered ( IL 515 )
Alternative labeling: not all functional locations have been converted ( IL 518 )
PP work center has plant &. Maintenance plant is & ( IL 700 )
Inconsistency: plant & is in company code & ( IL 703 )
Cost center & & is a statistical cost center ( IL 704 )
Table &1 change: Start Program &2 manually ( IL 743 )
Edit mask must only contain edit characters ( IL 800 )
Edit mask must not begin with a hyphen ( IL 801 )
Edit mask must not end with a hyphen ( IL 802 )
You cannot have two hyphens directly after one another ( IL 803 )
Invalid character in hierarchy levels ( IL 810 )
The numbering of the hierarchy levels is incorrect ( IL 811 )
There are levels outside the area of the edit mask ( IL 812 )
A hierarchy level must be under the last character of a block ( IL 813 )
A hierarchy level must not end with a separator ( IL 814 )
The entered level &1 is greater than the highest hierarchy level &2 ( IL 815 )
The second level &1 must be greater than the first level &2 ( IL 816 )
Change level entered is greater than the number of hierarchy levels ( IL 820 )
ConvLevel entered is greater than the no. of hierarchy levels ( IL 821 )
& structure indicator(s) is/are in use and could not be deleted ( IL 831 )
Location label is too long ( IL 839 )
Entry length allowed in the edit mask has been exceeded ( IL 840 )
Only letters and figures are allowed at the present cursor position ( IL 841 )
Functional location label must not end with a separator ( IL 842 )
Functional location label must not be initial in the first block ( IL 843 )
Separator corrected in functional location label ( IL 844 )
Only letters are allowed at the present cursor position ( IL 845 )
Only figures are allowed at the present cursor position ( IL 846 )
Only figures, letters or special characters allowed at cursor position ( IL 850 )
No status profile is assigned ( IL 896 )
Functional location &1 has been changed ( IL 897 )
No entry can be made in field & as field cannot be checked ( IL 899 )
Purchase requisition &1 item &2 not yet converted to a purchase order ( ILM 105 )
Start report program QM_PHASE_FILL to improve system performance ( ILM 233 )
You have not selected ILM for use in the Business Switch Framework ( ILM_ 011 )
Error occurred during processing of ILM_AUDIT ( ILM_ 020 )
Error occurred during processing of ILM_AUDIT ( ILM_ 021 )
Error occurred during processing of ILM_AUDIT ( ILM_ 022 )
No authorization for application ID &1 and archiving object &2 ( ILM_ADMIN 001 )
Business function DA_COCKPIT_ILM is not active ( ILM_ADMIN 060 )
Incomplete archiving sessions still exist ( ILM_ADMIN 062 )
Interrupted archiving sessions still exist ( ILM_ADMIN 063 )
Archiving object &1 does not exist ( ILM_AO 001 )
Session &1 cannot be set to invalid ( ILM_AO 003 )
Session &1 cannot be set to invalid ( ILM_AO 004 )
The selection of tables/fields for object &1 is not possible ( ILM_AUDIT 001 )
The selection of tables/fields for object category &1 is not possible ( ILM_AUDIT 002 )
You have no authorization to create a new audit area ( ILM_AUDIT 010 )
You have no authorization to change selection of object for audit area &1 ( ILM_AUDIT 013 )
You have no authorization to display any Audit Area ( ILM_AUDIT 014 )
You have no authorization to create an audit package template ( ILM_AUDIT 015 )
You have no authorization to display all audit package templates ( ILM_AUDIT 018 )
Audit Area has to be in customer namespace ( ILM_AUDIT 054 )
View &1 is still being used. View cannot be deleted. ( ILM_AUDIT 055 )
Structure &1 is not active in template. Relation &2 cannot be activated. ( ILM_AUDIT 056 )
Structure &1 is used by relation &2. Relation &2 was deactivated. ( ILM_AUDIT 057 )
Last available number of segment control already used; termination ( ILM_CDE_APPL 002 )
Error during CDE segment generation for table &1 (see long text) ( ILM_CDE_APPL 003 )
Error during CDE segment generation for archiving object &1 ( ILM_CDE_APPL 007 )
Error during CDE segment generation for tables for archiving object &1 ( ILM_CDE_APPL 008 )
You do not have authorization to display check variants. ( ILM_CHECKUI 014 )
You do not have authorization to display new check variants. ( ILM_CHECKUI 015 )
You do not have authorization to delete check variants. ( ILM_CHECKUI 016 )
You do not have authorization to modify check variants. ( ILM_CHECKUI 017 )
You do not have the authorization to generate checksums ( ILM_CHECKUI 018 )
You do not have the authorization to display checksums ( ILM_CHECKUI 019 )
You are not authorized to generate checksums for system &1 client &2 ( ILM_CHECKUI 020 )
You are not authorized to display checksums for system &1 client &2 ( ILM_CHECKUI 021 )
You are not authorized to delete checksums for system &1 client &2 ( ILM_CHECKUI 022 )
You do not have the authorization to change the status or comment ( ILM_CHECKUI 023 )
&1 is not an SRS system ( ILM_DAS_SB 001 )
Invalid file name: &1 ( ILM_DAS_SB 010 )
Collection &1 was not expanded automatically ( ILM_DAS_SB 020 )
ILM object &1: Assignment of available policy categories missing ( ILM_STANDARDS 008 )
ILM object &1: Assignment to arch. obj. or data destruction obj. missing ( ILM_STANDARDS 009 )
Archiving object &1: Assignment to ILM object is missing ( ILM_STANDARDS 010 )
Enter a description for ILM object &1 ( ILM_STANDARDS 011 )
ILM object &1: Legal Hold: Entry for BOR object and key is incomplete ( ILM_STANDARDS 012 )
Legal Hold: Assign a BOR object to ILM object &1 (if available) ( ILM_STANDARDS 013 )
Define at least one time reference for ILM object &1 ( ILM_STANDARDS 014 )
If possible, do not use obsolete time references for the ILM object ( ILM_STANDARDS 015 )
Time ref. &1 (dynamic registr.): Indirect value det., BAdI impl. missing ( ILM_STANDARDS 016 )
Time reference &1, indirect value determin.: BAdI implementation missing ( ILM_STANDARDS 017 )
Time reference &1: Not defined in Customizing ( ILM_STANDARDS 018 )
Time reference &1 (dynamic registration): Not defined in Customizing ( ILM_STANDARDS 019 )
Time ref. &1: You need to define time references dynam. or statically ( ILM_STANDARDS 020 )
Time ref. &1: Obj. categ.-spec. registr. for value deter. missing (stat.) ( ILM_STANDARDS 021 )
Time ref. &1: Obj. categ.-spec. registr. for value deter. missing (dyn.) ( ILM_STANDARDS 022 )
Time ref. &1: Dynamic registr. for direct and indirect value determin. ( ILM_STANDARDS 023 )
Time ref. &1: (static registration) needs indirect value determination ( ILM_STANDARDS 024 )
Time ref. &1: (dynamic registration) needs indirect value determination ( ILM_STANDARDS 025 )
There are empty fields in IRM_CUST maintenance dialog (see long text) ( ILM_STANDARDS 030 )
Define at least one condition field for ILM object &1 ( ILM_STANDARDS 034 )
Cond. field &1 (dynamic regist.): Indirect value det./BAdI impl. missing ( ILM_STANDARDS 036 )
Cond. field &1, indirect value determination: BAdI implementation missing ( ILM_STANDARDS 037 )
You need to define cond. fields (for ex. &1) dynamically or statically ( ILM_STANDARDS 040 )
Cond. field &1: Obj. categ.-spec. registr. for value det. missing (stat.) ( ILM_STANDARDS 041 )
Cond. field &1: Obj. cat.-spec. registr. for value det. missing (dynamic) ( ILM_STANDARDS 042 )
Cond. field &1: Dynamic registration for dir. and indir. value determin. ( ILM_STANDARDS 043 )
Active BAdI implementation missing for used time offset &1 ( ILM_STANDARDS 050 )
Invalid program state ( ILM_STOR 001 )
Business function for activation of ILM DB Store is not active ( ILM_STOR 002 )
Interface &1 implemented with &2 instead of &3 ( ILM_STOR 011 )
Runtime information &1 does not exist for handle &2 ( ILM_STOR 103 )
System cannot add runtime information &1 for handle &2 ( ILM_STOR 104 )
URI &1 is invalid ( ILM_STOR 106 )
System cannot determine handle for URL &1/origin &2 ( ILM_STOR 107 )
Legal hold for URI &1 cannot be changed; the path is already locked ( ILM_STOR 113 )
Legal hold for URI &1 cannot be deleted; the path is already locked ( ILM_STOR 114 )
Expiration date for URI &1 cannot be deleted ( ILM_STOR 115 )
Expiration date &1 for URI &2 has an invalid format ( ILM_STOR 116 )
Cannot change expiration date for URI &1 from date to <unknown> ( ILM_STOR 117 )
Expiration date &1 for URI &2 was shortened with &3 ( ILM_STOR 118 )
Expiration date &1 for URI &2 cannot be changed to &3 ( ILM_STOR 119 )
Expiration date &1 for URI &2 is in the past and therefore invalid ( ILM_STOR 120 )
URI &1 cannot be deleted because the element has expiration date &2 ( ILM_STOR 121 )
Cannot delete URI &1 because there is a legal hold on the element ( ILM_STOR 122 )
Process BAdI could not be determined for &1 ( ILM_STOR 123 )
Exception occurred during processing (&1) ( ILM_STOR 124 )
Resource &1 cannot be changed ( ILM_STOR 126 )
Cannot use handle &1: Object is not a resource ( ILM_STOR 127 )
You have not entered an ORIGIN ( ILM_STOR 133 )
Error while writing in file &1: &2 ( ILM_STOR 202 )
Shared file &1 does not exist ( ILM_STOR 203 )
No authorization for opening file &1 for &2 ( ILM_STOR 206 )
System caanot determine file name for a temporary file ( ILM_STOR 209 )
External handle &1 already exists and cannot be used ( ILM_STOR 219 )
Processing is completed in the background ( ILM_STOR 260 )
Element &1.&2 stays in the buffer as defined in Customizing ( ILM_STOR 264 )
Value &1 is not a Boolean value ( ILM_STOR 301 )
Value &1 is not a number ( ILM_STOR 302 )
Property &1.&2 is read-only ( ILM_STOR 304 )
Type &1 is not a known data type ( ILM_STOR 307 )
Database connection &1 not found ( ILM_STOR 309 )
Active origin was not selected ( ILM_STOR 310 )
No data connection entered for table &1 ( ILM_STOR 311 )
System command &1 for OS &2 is incorrect or not defined ( ILM_STOR 312 )
Logical path or file &1 not found ( ILM_STOR 313 )
You can only specify one of the optional parameters ( ILM_STOR 651 )
At least one parameter from list of optional parameters is missing ( ILM_STOR 652 )
Transfer already taking place, a second call is not possible ( ILM_STOR 653 )
Logical file name &1 does not exist ( ILM_STOR 658 )
No dictionary support for multiple instances (key &1) ( ILM_STOR 660 )
No class name available for interface &1, version &2, parameter &3 ( ILM_STOR 661 )
DBCON is not available for access to table &1 ( ILM_STOR 663 )
Context not initialized before calling method &1 ( ILM_STOR 664 )
Context origin already set, duplicate use not possible ( ILM_STOR 674 )
BAdI implementation &1 not permitted in productive systems ( ILM_STOR 677 )
Error during system command &1: &2 ( ILM_STOR 679 )
Set an origin for system [&1:&2], resource type [&3] ( ILM_STOR 686 )
Return value cannot be interpreted uniquely ( ILM_STOR 688 )
Specify connection type in the form <DBCON>@<CONN_SYS> ( ILM_STOR 689 )
This function is obsolete and can no longer be used. ( ILM_STOR 691 )
No authorization to select a data source ( ILM_STOR 701 )
Data source &1 has already been selected ( ILM_STOR 702 )
Use the customer namespace for the data source ( ILM_STOR 703 )
No authorization to generate administration tables ( ILM_STOR 705 )
No authorization to execute test reports ( ILM_STOR 706 )
No authorization to change Customizing ( ILM_STOR 707 )
You are not authorized to execute this function ( ILM_STOR 708 )
No authorization to use the ILM DB store in production mode ( ILM_STOR 709 )
Origin &1 is already being used elsewhere as an administrative origin ( ILM_STOR 711 )
You cannot use origin &1 because it already contains Customizing ( ILM_STOR 714 )
Client ID &1 already exists; changing it is possible, creation is not ( ILM_STOR 716 )
Client ID &1 does not exist yet; update not possible ( ILM_STOR 717 )
Origin &1 cannot be assigned to a content repository; it has no parent ( ILM_STOR 722 )
Master entry missing in root table for &1.&2 ( ILM_STOR 802 )
Security breach when accessing table &1 ( ILM_STOR 808 )
Name & invalid for data table; name must start with Y, Y, or Z ( ILM_STOR 812 )
You are not authorized to delete &1 ( ILM_STOR 815 )
Pooled table cannot be created: &1 ( ILM_STOR 817 )
Proxy table &1 cannot be created ( ILM_STOR 819 )
Copying not possible: original table &1 does not exist ( ILM_STOR 820 )
Generating data table &1 for connection &2 failed ( ILM_STOR 821 )
Pooled table &3 was selected for origin &1, URI &2 ( ILM_STOR 824 )
New pooled table &3 was generated for origin &1, URI &2 ( ILM_STOR 825 )
Pooled table &1 reached its size limit; do not add more data ( ILM_STOR 828 )
SELECT returns multiple results (only one entry permitted) ( ILM_STOR 840 )
Invalid: Administrative <- operative ORIGIN &1 not unique ( ILM_STOR 841 )
Variant '&1' update not possible; variant is already used ( ILM_STOR_CS 093 )
Invalid program state ( ILM_STOR_CS 096 )
RFC destination '&1' does not exist ( ILM_STOR_CS 301 )
Value of parameter '&1' must be '&2' ( ILM_STOR_CS 325 )
No parent paths to assemble URI of the plugin's home collection ( ILM_STOR_CS 331 )
Synchronous processing started. ( ILM_STOR_MBC 427 )
SAP NetWeaver version &1 with SPS = &2 is not supported ( ILM_STOR_MISC 006 )
ICF service with the handler '&1' does not exist ( ILM_STOR_MISC 021 )
ICF service '&1' is not active ( ILM_STOR_MISC 023 )
ICM: Error while reading value of profile parameter '&1' ( ILM_STOR_MISC 030 )
ICM: '&1' protocol is not set up on the system ( ILM_STOR_MISC 032 )
ICM HTTP parameter '&1': value = &2 KB may be too low ( ILM_STOR_MISC 033 )
ICF service user '&1': not of type "Service" user ( ILM_STOR_MISC 036 )
ICF service user '&1': authorization object '&2' missing ( ILM_STOR_MISC 037 )
ICF service user '&1': authorization object '&2' cannot be assigned ( ILM_STOR_MISC 039 )
Logical file name '&1': assigned logical path '&2' is invalid ( ILM_STOR_MISC 042 )
Logical file name '&1': not found in the transaction FILE ( ILM_STOR_MISC 043 )
Operating system command '&1' is missing ( ILM_STOR_MISC 047 )
Default technical origin '&1' is not an administrative origin ( ILM_STOR_MISC 057 )
Operational origin '&1' is missing for the administrative origin '&2' ( ILM_STOR_MISC 058 )
Default operational origin '&1' cannot be set as administrative origin ( ILM_STOR_MISC 059 )
Origin '&1': namespace '&2': missing property '&3' ( ILM_STOR_MISC 060 )
Origin '&2': namespace '&1': invalid value for the property '&3' ( ILM_STOR_MISC 061 )
Origin '&1': property '&2' contains an invalid connection ID '&3' ( ILM_STOR_MISC 064 )
Origin '&1': conn. type &2 = &3 does not correspond to conn. ID &4 ( ILM_STOR_MISC 065 )
Origin '&1': connection ID '&2' cannot connect to '&3' storage ( ILM_STOR_MISC 068 )
Origin '&1': no connection type corresponds to the connection ID '&2' ( ILM_STOR_MISC 069 )
Operational origin '&1' is assigned to multiple administrative origins ( ILM_STOR_MISC 070 )
Origin '&1': no client definition found for the administrative origin ( ILM_STOR_MISC 071 )
Origin '&1': no client definition found for the operational origin ( ILM_STOR_MISC 072 )
ICF service user '&1': No authorization to auth. object '&2' ( ILM_STOR_MISC 082 )
ICF service user '&1': Insufficient auth. value in auth. object '&2' ( ILM_STOR_MISC 083 )
ICF service user '&1': Auth. value '&2' was not assigned to the object &3 ( ILM_STOR_MISC 084 )
Target_Host = '&1' : port = '&2' ( ILM_STOR_MISC 102 )
No ILM Store exists in SRS administration for ICF service '&1' ( ILM_STOR_MISC 151 )
No valid RFC destination exists for ICF service '&1' ( ILM_STOR_MISC 156 )
RFC dest. '&1': invalid value assigned for &2; expected value = &4 ( ILM_STOR_MISC 161 )
Retention policies not found for ILM Store '&1' ( ILM_STOR_MISC 168 )
SRS is not installed locally on system &1(&2) ( ILM_STOR_MISC 172 )
Run report '&1' on the system where the external SRS client is installed ( ILM_STOR_MISC 175 )
RFC destination '&1' does not exist ( ILM_STOR_MISC 190 )
This functionality is obsolete and must not be used any longer ( ILM_STOR_MON 004 )
Name '&1' is used by multiple background jobs ( ILM_STOR_MON_CSV 143 )
Unknown period unit value '&1' ( ILM_STOR_MON_CSV 211 )
Incorrect formatting of file name '&1' ( ILM_STOR_MON_CSV 214 )
KPI '&1' could not be found ( ILM_STOR_MON_CSV 401 )
CSV export is inactive ( ILM_STOR_MON_CSV 402 )
CSV export does not support the KPI area level ( ILM_STOR_MON_CSV 403 )
Unknown count of DB operations; see long text ( ILM_STOR_STAT 204 )
Equipment & does not exist ( IM 003 )
Location/acct assignment data does not exist for PM notification & ( IM 004 )
No catalog profile has been maintained for notification category & ( IM 005 )
Functional location & copied from equipment ( IM 006 )
Functional location will be removed, since equipment not installed ( IM 007 )
Please enter functional location or equipment ( IM 008 )
No functional location or equipment entered ( IM 009 )
Explosion not possible w/o entering an affected funct.loc. or equipment ( IM 013 )
An equipment must be entered before making an assembly selection ( IM 017 )
No reference object selected ( IM 019 )
Equipment &1 not in the structure of equipment &2 ( IM 020 )
Functional location &1 not in the structure of functional location &2 ( IM 021 )
Assembly does not form part of the equipment BOM ( IM 023 )
Equipment has no bill of material ( IM 024 )
No hierarchy exists ( IM 029 )
Object affected copied from the notification ( IM 034 )
The PM notification refers to equipment & ( IM 035 )
The PM notification refers to functional location & ( IM 036 )
Cannot have an assembly without entering an equipment ( IM 037 )
Changes to equipment not allowed, since assembly already created ( IM 038 )
Select a valid line ( IM 040 )
System: error when reading notification category table. Key: & ( IM 041 )
Not a valid assembly ( IM 042 )
Location data does not exist for equipment &1 at time &2 ( IM 043 )
Location data does not exist for equipment &1 at time &2 ( IM 044 )
No internal number assignment is allowed for notif. type & -> long text ( IM 047 )
Number range for notification type & incorrectly maintained -> long text ( IM 048 )
No response profile could be defined. ( IM 056 )
No service profile could be defined ( IM 057 )
Note: service contract! ( IM 058 )
Object information is not available for the current object type. ( IM 059 )
Note: classification information! ( IM 060 )
Enter a sales area. ( IM 061 )
The combination of sales org., distrib.channel & division is not allowed ( IM 062 )
Plant & is not allowed for the sales org. and distrib.channel ( IM 063 )
Sales order creation is not possible for this notification type ( IM 066 )
Maintenance contract was redetermined ( IM 069 )
Sales org., dist. channel and division from object and notif. differ ( IM 070 )
Sales org., dist.channel and division fr. location data and notif. differ ( IM 071 )
Sales order for notification & already created ( IM 072 )
Message &1 has order assignment; not possible to save using message BAPI ( IM 075 )
No entries exist for selection criteria &1 &2 ( IM 103 )
Code group & contradicts the code group of the catalog profile ( IM 104 )
Code group cannot be identified uniquely ( IM 105 )
Code group for damage not contained in the catalog ( IM 115 )
Code group for object component not contained in the catalog ( IM 116 )
Code group for cause not contained in the catalog ( IM 117 )
Code group for task not contained in the catalog ( IM 118 )
Code group for activity not contained in the catalog ( IM 119 )
Code group & and notification type & are incompatible ( IM 125 )
Note individual catalog profile & ( IM 126 )
Catalog profile cannot be copied ( IM 129 )
Catalog profile copied from equipment ( IM 130 )
Catalog profile copied from the functional location ( IM 131 )
& tasks were created from the response profile ( IM 132 )
Catalog profile cannot be copied ( IM 135 )
Catalog profile cannot be copied ( IM 136 )
Catalog profile cannot be copied ( IM 137 )
Catalog profile cannot be copied ( IM 138 )
No tasks found for the response profile ( IM 139 )
The view is only changeable if a reference object has not been assigned ( IM 146 )
No selection made ( IM 153 )
Code group entered does not exist in catalog &1 ( IM 154 )
The partner funct. entered is not defined in determination procedure & ( IM 155 )
Partner type of the partner function entered is not allowed ( IM 156 )
Partner type of the partner function entered is not allowed ( IM 159 )
Cat. profile & not suitable for notif. cat. Plant Maintenance/Cust. Serv. ( IM 161 )
No partners could be determined ( IM 167 )
Please enter a class type for classifying errors ( IM 218 )
You have no error classification active ( IM 219 )
No standard class type defined for error ( IM 220 )
Subscreen data for notification type & not maintained ( IM 222 )
Subscreen data for subscreen category &1 not maintained ( IM 223 )
A new classification is possible after leaving the notification ( IM 224 )
Invalid object category (status management) ( IM 251 )
Status object already exists ( IM 252 )
Invalid status profile ( IM 253 )
Invalid object number (status management) ( IM 254 )
Invalid new object number (status management) ( IM 255 )
Invalid old object number (status management) ( IM 256 )
Status number already exists ( IM 257 )
Object does not exist (status management) ( IM 258 )
Inconsistent status ( IM 259 )
Status not allowed ( IM 260 )
Operation not allowed ( IM 262 )
Operation not allowed for notification & ( IM 263 )
New entry not possible, since notification already completed ( IM 264 )
Completion not possible, since not all tasks carried out ( IM 265 )
Status management: Task object type for notif.category & not maintained ( IM 266 )
Notification is completed -> can only be displayed ( IM 267 )
Notification & can not be completed ( IM 268 )
Notification & can not be completed since task(s) still outstanding ( IM 269 )
Object list does not contain any notifications ( IM 270 )
Deletion of notification allocation to order & not allowed ( IM 273 )
Status management: Please check status for reference object ( IM 274 )
Reference object for business operation not allowed ( IM 275 )
Notification is flagged for archiving; only display is possible ( IM 276 )
An error occurred whilst processing the notification ( IM 277 )
You cannot delete the entry ( IM 283 )
Notification &1: Inconsistency Phase/Status Management ( IM 285 )
Error in print control ( IM 302 )
Invalid key while processing print protocol ( IM 303 )
Termination while printing notification ( IM 304 )
Shop papers will not be printed ( IM 307 )
Assigned order could not be frozen ( IM 314 )
Notification & completed ( IM 408 )
Function code not defined ( IM 409 )
Notification type & not defined ( IM 421 )
Origin indicator not maintained for notification type ( IM 422 )
Notification type is initial ( IM 423 )
Error during date calculation: Date before reference time ( IM 424 )
Error during date calculation: Date too high ( IM 425 )
Error during date calculation: Time entered not numerical ( IM 426 )
Error during date calculation: Panel not in control table ( IM 427 )
Error during date calculation: Panel not in control table ( IM 428 )
Number range for notification type & not maintained ( IM 429 )
External number assignment, please enter notification number ( IM 430 )
Error during number assignment: Interval not found ( IM 432 )
Effect not defined ( IM 438 )
System state not defined ( IM 439 )
Proposed reference date not maintained for completn of notification type ( IM 442 )
Status admin.: object category not maintained for notification category & ( IM 449 )
Unit & missing in the check table ( IM 454 )
Unit missing in the check table ( IM 455 )
Notification category not maintained for notification type & ( IM 456 )
Notification category not maintained for transaction & ( IM 457 )
Transaction &1 not allowed for notification type &2 ( IM 458 )
Please enter an order number ( IM 460 )
Notification completion flagged ( IM 466 )
Equipment does not exist at date &1 &2 ( IM 467 )
Please enter valid priority ( IM 469 )
Execution date reset according to priority ( IM 475 )
Notification & still being updated ( IM 480 )
Deleting the notification in transaction call not allowed ( IM 485 )
The notification is assigned to an order ( IM 486 )
Malfunction start only allowed until date $ ( IM 489 )
Malfunction start only allowed from date $ ( IM 490 )
Malfunction end only allowed to date $ ( IM 491 )
Malfunction end only allowed from date $ ( IM 492 )
Notification is not yet allocated to an order ( IM 494 )
Order type with external number assignment not allowed ( IM 496 )
Please enter company area ( IM 497 )
Transaction & not in the internal control table ( IM 503 )
No entries created yet ( IM 505 )
Planned task end is after desired notification end ( IM 507 )
Planned task start is before desired notification start ( IM 508 )
Planned task start is after desired notification end ( IM 509 )
Notification has not yet been assigned to a sales order ( IM 510 )
Time only useful in connection with a date ( IM 511 )
Planned task end is before desired notification start ( IM 512 )
Amount returned is greated than amount in complaint ( IM 513 )
Missing amount &1 may not be greater than reclaimed amount &4 ( IM 514 )
Return deliv. date only makes sense if amount returned is there ( IM 515 )
Return delivery date is in the future ( IM 516 )
Activity start is before desired notification start ( IM 517 )
Activity start is after desired notification end ( IM 518 )
Avtiviy end is after desired notification end ( IM 519 )
Activity end is nefore desired notification start ( IM 520 )
Notification was already assigned to a sales order ( IM 523 )
Enter at least the task text ( IM 524 )
You are not allowed to delete task & ( IM 526 )
The item & may not be deleted ( IM 527 )
Incorrect internal qty &1 &4 exceeds incorrect internal qty for hdr: &2 ( IM 531 )
Incorrect external qty &1 &4 exceeds incorrect external qty for hdr: &2 ( IM 532 )
Incorrect internal quantity of item &1 is higher (&2 &3) ( IM 533 )
Incorrect external quantity of item &1 is higher (&2 &3) ( IM 534 )
Enter at least one cause text ( IM 535 )
Enter at least one activity text ( IM 537 )
Screen setting for notification type &1 not maintained, copy standard ( IM 538 )
You are not allowed to delete task & ( IM 540 )
The sort number is not unique ( IM 541 )
Planned start of the task is the same as the planned end ( IM 542 )
At least one incorrect item exists in the template message ( IM 570 )
At least one incorrect task exists in the template message ( IM 571 )
At least one incorrect action exists in the template message ( IM 572 )
At lesat one incorrect cause exists in the template message ( IM 573 )
Partner determination procedure and standard role do not match ( IM 574 )
System: more than 9999 entries in field & ( IM 601 )
System date proposed as reference date ( IM 602 )
Value already exists ( IM 651 )
Notification item &1 not available ( IM 652 )
Customizing of screen areas is incomplete for notification type &1 ( IM 660 )
Maintain a screen from the function group XQQM as &1 ( IM 670 )
The selected segmentation of the tab index is not permitted ( IM 671 )
Screen areas '090'/'100' cannot be used together with '091'/'101' ( IM 672 )
Not possible to compare the notification and object data ( IM 673 )
Maintain a partner funtion in Customizing for pers. responsible for task ( IM 705 )
Customer number &1 does not exist ( IM 706 )
Vendor number &1 does not exist ( IM 707 )
Partner number &1 does not exist ( IM 708 )
Organizational unit &1 does not exist ( IM 709 )
Position &1 does not exist ( IM 710 )
User &1 does not exist ( IM 711 )
Personnel number &1 does not exist ( IM 712 )
No catalog entry could be selected ( IM 715 )
No individual address created for this notification ( IM 716 )
Object list editing not possible for order type &1 ( IM 717 )
No text can be displayed for the code ( IM 720 )
A sales order is already active in the notification processing ( IM 780 )
A sales order is already active in the return goods processing ( IM 781 )
A sales order is already active for advance shipment ( IM 782 )
A sales order is already active in the creation of a quotation ( IM 783 )
Decentralized system for distributed plant maintenance => no archiving ( IM 785 )
"Until Measuring Time" is before end of residence time => see long text ( IM 787 )
No partner function determined for the paging partner ( IM 790 )
No partner function determined for the paging partner ( IM 791 )
Warning: Statistics currency changed. Please check long text. ( IM 815 )
Conversion completed successfully : Client $ Table $ ( IM 816 )
Conversion faulty : Client $ Table $ ( IM 817 )
Release / Put change faulty : Client $ Table $_ ( IM 818 )
SAP standard settings copied for client & table & ( IM 819 )
Display function not supported for key figure & ( IM 822 )
Selection and key figure value may vary ( IM 823 )
Equipment: & Acquisition value without currency ( IM 839 )
Equipment: & Acquisition value without acquisition date ( IM 840 )
Equipment: & No exchange rate of acquisition currency for stat.currency ( IM 841 )
Invalid description of name ( IMC 001 )
Document the entry ( IMC 002 )
Cannot be displayed on screen ( IMC 005 )
Error creating admin user &1 ( IMG_FASTCONF 001 )
Error creating a business partner ( IMG_FASTCONF 002 )
Error creating communication user &1 ( IMG_FASTCONF 003 )
Error creating communication to SAP Service and Support ( IMG_FASTCONF 004 )
Log display error ( IMG_FASTCONF 009 )
Central user management check error ( IMG_FASTCONF 010 )
Error creating central person for user &1 ( IMG_FASTCONF 012 )
Error writing application log ( IMG_FASTCONF 014 )
Basic configuration error ( IMG_FASTCONF 015 )
SAP ChaRM auto-configuration warnings ( IMG_FASTCONF 028 )
SAP MOPZ auto-configuration warnings ( IMG_FASTCONF 030 )
Error when locking workset ( IMP 118 )
Link type does not support alphanumeric link numbers ( IN 090 )
Link is not defined ( IN 116 )
Link node is not defined ( IN 117 )
Medium & still being used ( IN 118 )
Object type & still being used ( IN 119 )
Network identification & still being used ( IN 120 )
The object network cannot be concealed completely ( IN 133 )
Node & being used in direct environment.Please explode network further. ( IN 141 )
Exception &1 when reading languages for index category &2 ( INDEX2 001 )
Exception &1 when creating language &2 for index category &3 Rcode: &4 ( INDEX2 002 )
Deindex call exception &1 for Catid: &2 Language: &3 Rcode: &4 ( INDEX2 003 )
Index call exception &1 for Catid: &2 Language: &3 Rcode: &4 ( INDEX2 010 )
No data supply module is defined for application &1 ( INDEX2 011 )
Optimize call exception &1 for CatID: &2 Language: &3 Return code: &4 ( INDEXING 008 )
Deindex call exception &1 for CatID: &2 Language: &3 Return code: &4 ( INDEXING 009 )
Index call exception &1 for CatID: &2 Language: &3 Return code: &4 ( INDEXING 010 )
Phio_Get_Content_Access exception &1 for physical document &2 &3 CatID &4 ( INDEXING 011 )
Exception &1 for reading languages for index category &2 ( INDEXING 012 )
Exception &1 for creating language &2 for index category &3 Rcode: &4 ( INDEXING 013 )
Document area &1 does not exist: Error &2 ( INDEXING 014 )
Index category could not be created: Exception &1, Error &2 ( INDEXING 015 )
No document area exists for document class: &1 ( INDEXING 016 )
SDOK_INDEX_SEARCH: Exception &1 ( INDEXING 020 )
Error &2 in processing the requests for index category &1 ( INDEXING 021 )
Exception &1 for SDOK_IDXSPC_PROPERTIES_GET for class &2, phys. doc. &3 ( INDEXING 023 )
Exception &1 for PHIO &2 &3, Language &4 for SDOK_INDEX_PHIO_ASYNC call ( INDEXING 026 )
Exception &1 for deleting physical index for language &2, CatID &3 ( INDEXING 027 )
Error in limited attribute search ( INDEXING 037 )
Exception &1 when calling module SDOK_DOCUSPACE_SEARCH ( INDEXING 038 )
Exception &1 when calling module SDOK_PHIO_FIND_BY_QUERY ( INDEXING 039 )
Process terminated: RFC cannot be determined ( INDEXING 063 )
Exception &1 raised when determining the index category ( INDEXING 207 )
Data buffered, program exiting ( INDEXING 216 )
Document class &1 cannot currently be indexed ( INDEXING 222 )
The following exception was raised when searching: &1 ( INDEXING 225 )
Search call exception &1 for CatID: &2 language: &3 return code: &4 ( INDEXING 230 )
Merge of index space and document area successful ( INDEXING 501 )
An error occurred when connecting to system &1 ( INM_OBJECT_FRAMEWORK 002 )
Characteristic '&1' does not exist in InfoProvider '&2' ( INM_PPA 001 )
Key figure '&1' does not exist in InfoProvider '&2' ( INM_PPA 002 )
Charac. '&1' is not marked as "to be changed" in planning function '&2' ( INM_PPA 003 )
No financial category or group could be determined for '&2/&1' ( INM_PPA 019 )
&1 data records already exist; key figures are not overwritten ( INM_PPA 020 )
No key figures have been defined for copying for source InfoProvider '&1' ( INM_PPA 025 )
No version has been selected for copying ( INM_PPA 026 )
Version to be copied must not be the final version ( INM_PPA 027 )
Invalid financial category '&1' for RPM portfolio item '&2' ( INM_PPA 030 )
Invalid financial group '&1' for RPM portfolio item '&2' ( INM_PPA 031 )
Only amounts were transferred to '&4' for grp '&1', cat.'&2', period '&3' ( INM_PPA 032 )
Planning data for '&1' was not transferred (no valid-to date exists) ( INM_PPA 033 )
No planning data was transferred to RPM financial planning ( INM_PPA 034 )
All planning data was successfully transferred to RPM financial planning ( INM_PPA 035 )
Transfer of planning data to RPM financial planning is incomplete ( INM_PPA 036 )
An unknown error occurred when transferring planning data ( INM_PPA 039 )
Source system for RPM portfolio item '&1' is unknown ( INM_PPA 042 )
Posting period could not be determined for date '&1' ( INM_PPA 053 )
No RPM portfolio item has been specified (see long text) ( INM_PPA 060 )
Internal error ( INM_SYNCH_FRAMEWORK 019 )
You cannot assign subobjects; project allows non-sequential phases ( INM_SYNCH_FRAMEWORK 066 )
System error while reading project ( INM_SYNCH_FRAMEWORK 067 )
Participant has been excluded; not allowed to reinsert ( INPUT_REC 002 )
& can be the predecessor ( INST_MSG 704 )
& has dependencies: cannot be moved ( INST_MSG 705 )
Prerequisite for &1 not fulfilled ( INST_MSG 801 )
Parameter passing for &1 incomplete ( INST_MSG 802 )
Check for &1 failed ( INST_MSG 803 )
Determination of selection parameter failed ( INST_MSG 804 )
You are not authorized to execute &1 ( INST_MSG 805 )
Customizing (Basis settings) locked ( INST_MSG 806 )
No documentation available for report & ( INST_MSG 807 )
& has a successor: cannot be deleted ( INST_MSG 808 )
Step & can only be executed in a Smart implementation ( INST_MSG 809 )
Step & cannot be repeated ( INST_MSG 811 )
Step & cannot be restarted ( INST_MSG 812 )
Step & is not yet completed ( INST_MSG 813 )
Step & is only allowed after installation ( INST_MSG 815 )
Step & already executed: will be skipped ( INST_MSG 817 )
Step & still active: wait for completion ( INST_MSG 818 )
Step & is canceled ( INST_MSG 819 )
Logistics Integration Profile is not allowed; check Ctrl Key &1 ( INT_TM_ERP 007 )
Technical TM Number is not allowed; check Ctrl Key &1 ( INT_TM_ERP 008 )
Settings in Control Key & are not valid for sales documents ( INT_TM_ERP 012 )
Settings in Control Key & are not valid for purchasing documents ( INT_TM_ERP 013 )
Settings in Control Key & are not valid for delivery documents ( INT_TM_ERP 014 )
Invalid Settings for Control Key & ( INT_TM_ERP 015 )
Delivery already exists for document &1; change not possible ( INT_TM_ERP 380 )
Selected shipping condition is not allowed; cannot change document &1 ( INT_TM_ERP 381 )
Select a bill document header line ( INV 000 )
Select one bill document header line only ( INV 001 )
Requested action not possible due to current object status ( INV 002 )
Not all bill documents for selected bill header were displayed ( INV 011 )
Not all bill documents for the selected bill headers were displayed ( INV 012 )
Select a bill document header line ( INV 014 )
Error in reading table &1 &2 &3 &4 ( INV 015 )
Error in changing table &1 &2 &3 &4 ( INV 016 )
Method &1 was not processed ( INV 017 )
Select a display mode ( INV 020 )
Display modes for the bill document do not match ( INV 021 )
No bill documents for selection ( INV 022 )
Non-permitted status determined ( INV 024 )
Cannot determine a grid for installation &1 ( INV 043 )
Cannot find a process for process type &1 ( INV 044 )
Cannot find process &1 ( INV 046 )
Errors in Customizing ( INV 047 )
Data changes not permitted by module &1 ( INV 050 )
Subprocess &1 suppressed ( INV 051 )
Subprocess &1 reactivated ( INV 052 )
There are no subprocesses to suppress ( INV 054 )
Status determination takes place according to priority ( INV 065 )
Buffering not possible, more than &1 points of delivery to be processed ( INV 071 )
Select a line ( INV 115 )
Select one line only ( INV 118 )
Define a display function for reference type &1 ( INV 120 )
The specified line type (&1, &2) is not permitted for this document ( INV 127 )
Bill documents with status &1 cannot be displayed ( INV 128 )
You do not have authorization to display bill documents for sender ( INV 129 )
You do not have authorization to display bill documents for recipient ( INV 130 )
Line &1: Field &2 only available if business function (&3) is active ( INV 134 )
Cannot determine retention period for archiving object &1 ( INV 202 )
Internal error while requesting a new object from the archive ( INV 206 )
Internal error while reading a data record from the archive ( INV 208 )
Selection data must be transfered in mode &1 ( INV 301 )
Bill/payment advice number &1 is not permitted ( INV 308 )
Document number &1 is not in process ( INV 309 )
No document number specified ( INV 310 )
Field &1 not filled ( INV 311 )
Process &1 was suppressed ( INV 314 )
Function &1 is not permitted for process &2 ( INV 315 )
Overwrite not permitted for process &2 ( INV 316 )
ID of point of delviery group &1 is not valid for deregulation process &2 ( INV 317 )
The data was not saved. 'Basic Settings' flag set more than once ( INV 318 )
Document &2 was reset by process '&1' ( INV 322 )
Environment display not supported for selected object ( IO 006 )
CAUTION: Critical point in number range & has been reached ( IO 007 )
CAUTION: The last number in number range & has been assigned ( IO 008 )
CAUTION: Critical reuse of already used object lists ( IO 009 )
CAUTION: Critical point in number range & has been reached ( IO 010 )
CAUTION: The last number in number range & has been assigned ( IO 011 )
Notification & is already in the object list ( IO 101 )
Equipment & is already in the object list ( IO 102 )
Equipment &1 assembly &2 is already in the object list ( IO 103 )
Functional location & is already in the object list ( IO 104 )
You must enter a piece of equipment when you enter an assembly ( IO 105 )
Equipment & has no BOM --> assembly will be refreshed ( IO 107 )
Assembly & is not part of the equipment BOM ( IO 108 )
Deletion not possible as a MaintNotification is assigned to the order ( IO 109 )
Maintenance notification can no longer be changed ( IO 110 )
You have only made an entry in the sort field --> Enter object ( IO 111 )
No assembly selected -> entry will be reset ( IO 116 )
No entries in object list -> maintain object list ( IO 117 )
No unique PM notification can be found ( IO 118 )
Object list contains no maintenance notifications ( IO 119 )
Assembly & is already included in the object list ( IO 120 )
Functional location &1 assembly &2 already contained in object list ( IO 121 )
No valid assembly & ( IO 122 )
Material number & is already contained in the object list ( IO 123 )
Serial number &1 and material number &2 are already in the object list ( IO 124 )
Error &1 while processing the MASE record for material &2 ( IO 151 )
Serial number & cannot be used here ( IO 201 )
Error in status management ( IO 202 )
Check the status of serial number & ( IO 203 )
Serialization not possible for material number & ( IO 205 )
Serial number &1 already assigned to delivery &2 ( IO 207 )
Serial number & is already being used by another item ( IO 208 )
Equipment assignment to serial number & cannot be deleted ( IO 209 )
Serial number & already locked ( IO 210 )
Error on locking on serial number & ( IO 211 )
Exactly &1 serial numbers must be selected (instead of &2) ( IO 212 )
Serial number & already assigned ( IO 213 )
No new serial numbers can be entered for material & (&) ( IO 214 )
Enter a serial number first ( IO 215 )
No more than & serial numbers can be assigned ( IO 216 )
Serial number profile of material & does not allow serial numbers ( IO 217 )
Last serial number for the material -> transaction canceled ( IO 218 )
No equipment exists for serial number & ( IO 219 )
All serial numbers have been entered ( IO 220 )
Select the corresponding serial numbers ( IO 221 )
No equipment exists for serial number & ( IO 222 )
Serial number &1 does not yet exist for material &2 ( IO 223 )
Serial numbers are being created for material & ( IO 224 )
Error on locking serial number for material & ( IO 225 )
Configuration of serial number & incompatible with document item ( IO 226 )
Serious error during serial number configuration ( IO 227 )
Serial number &1 to material &2 has not yet been created ( IO 228 )
Batch for serial number &1 (&2) differs from document batch &3 ( IO 229 )
Material no. of serial no. &1 (&2) not equal to doc. material no. &3 ( IO 230 )
Stock data of serial number &1 not suitable for movement ( IO 231 )
Status errors occurred for the serial numbers concerned ( IO 232 )
Serial number profile for material with inventory ( IO 233 )
Serial number has been changed from &1 to &2 ( IO 234 )
Change to batch status and material movement not allowed in same transac. ( IO 235 )
You have already moved serial number &1 later (&3) than posting date &2 ( IO 236 )
Serial number profile & is not defined in Customizing ( IO 260 )
Serialization procedure &2 is not defined in serial number profile &1 ( IO 261 )
Serial number obligatory material & cannot be updated ( IO 262 )
Detailed info for usage decision -> see long text ( IO 270 )
InvDiffPosting not possible due to problems with serial numbers ( IO 271 )
Error in screen sequence control ( IO 300 )
Parameter &1 was illegally transferred during operation &2 ( IO 301 )
Parameter &1 has default value during operation &2 ( IO 302 )
Only operation & supported here up to now ( IO 303 )
Only &2 serial numbers entered instead of &1 ( IO 304 )
Termination upon goods issue posting of delivery item &1/&2, material &3 ( IO 305 )
Movement type & does not currently support serial number management ( IO 306 )
No copying of object list entries not matching object usage 'S' ( IO 307 )
A character string has not been entered ( IO 401 )
Entry string &1 has a character that is missing in character set &2 ( IO 402 )
The character strings to be compared (&1 and 2) have different lengths ( IO 403 )
The character strings to be compared (&1 and &2) are identical ( IO 404 )
The character strings to be compared (&1 and &2) do not follow each other ( IO 405 )
Character string &1 is a special direct successor of &2 ( IO 406 )
Character string &1 is not a special successor of &2 ( IO 407 )
The defined output length &1 is to small for output &2 ( IO 408 )
Error in print formatting ( IO 409 )
The character record was not specified ( IO 410 )
Method & does not exist for controlling the output of line edges ( IO 411 )
Delimiters are missing for the line edges ( IO 412 )
The separator is missing for intervals ( IO 413 )
Two identical character strings are contained in the worklist ( IO 414 )
At least one string in the worklist contains an invalid character ( IO 415 )
A character string in the worklist is not a direct special successor ( IO 416 )
The output length specified is not sufficient for the presentation ( IO 417 )
The separator is missing for the character strings ( IO 418 )
Maximum URL length (>255 characters) exceeded ( IOCI 021 )
Operation &1 is not intended for service ( --> long text) ( IOCI 031 )
Service quantity set to 1 ( IOCI 038 )
Object type not supported: &1 &2 ( IOPOL 102 )
Overflow error: '&1' could not be moved ( IOPOL 103 )
Maintenance item & is assigned to maintenance plan & ( IP 096 )
Unit does not have dimension & & ( IP 102 )
Measuring point & is not a counter ( IP 104 )
A cycle exists already for this counter --> reset ( IP 105 )
Unit & and counter unit & have different dimensions ( IP 106 )
You have not selected any cycles for deletion ( IP 107 )
Select a cycle first ( IP 108 )
Time-based cycle -> counter entry not possible ( IP 109 )
The cycle length must be a multiple of one day ( IP 110 )
Offset will be recalculated from the planned counter reading ( IP 111 )
The maintenance plan only contains one maintenance item ( IP 112 )
The offset length must be a multiple of one day ( IP 113 )
Displaying counter info. is not possible with time-based maint. cycles ( IP 114 )
The maintenance plan already contains a time cycle ( IP 115 )
Maintain a counter for the maintenance cycle ( IP 117 )
Maintenance item is already allocated a task list ( IP 118 )
No equipment entered -> creating equipment task list not possible ( IP 119 )
No FunctLoc. entered -> creating FunctLoc. task list not possible ( IP 120 )
Both Equip. and FunctLoc. entered -> function not possible ( IP 121 )
Next planned counter reading must be larger than total counter reading ( IP 122 )
Offset to next planned counter reading must be larger than 0 ( IP 123 )
Only counters that run forwards can be entered ( IP 124 )
Time-based cycle -> displaying planned counter reading not possible ( IP 125 )
Maintain either a cycle or an offset ( IP 126 )
Cycle entered after sched. has occurred -> maintain planned ctr rdg/date ( IP 127 )
Multiple counter plans cannot be calculated ( IP 129 )
No maintenance plan costing ( IP 130 )
The chosen time unit & is not time-dependent ( IP 132 )
Status "Inactive" set for maintenance plan & ( IP 134 )
Status "Deletion flag" set for maintenance plan & ( IP 135 )
Only 'order' call object permitted for maint. plan cat. with contract ( IP 136 )
Maintenance plan not adapted by resetting of date of acceptance ( IP 137 )
Maintenance plan not adapted by resetting of technical completion ( IP 138 )
Maintenance plan not adapted by resetting of notification completion ( IP 139 )
No unit is defined for 'DAY' ( IP 140 )
An error has occurred during editing of the maintenance plan ( IP 141 )
Status "Deletion indicator" set for maintenance plan & ( IP 142 )
The cycle length must be one month or a multiple of one month ( IP 143 )
This report can only be executed in the background ( IP 152 )
Error when saving error log ( IP 154 )
An error occurred when calculating maintenance plan &1 ( IP 156 )
Package &1 is no longer used in item &3 of plan &2 ( IP 157 )
Maintenance plan category & not available ( IP 304 )
Location data not found ( IP 306 )
Maintenance plan number not valid ( IP 309 )
MaintItem is assigned to MaintPlan & - only display possible ( IP 312 )
Maintenance item has no object list ( IP 325 )
No contract for the reference object could be selected ( IP 326 )
Task list data reversed because of change of object ( IP 331 )
Function for displaying object is not supported in this field ( IP 333 )
No maintenance plan exists for strategy & ( IP 334 )
No valid maintenance activity type exists ( IP 336 )
You can choose between an internal and an external number ( IP 337 )
Task list does not contain any maintenance packages ( IP 338 )
Assignment not possible! Maintain strategy texts in language & ( IP 339 )
Only order types with internal number assignment are allowed ( IP 341 )
Company codes of maintenance plan and settlement rule are different ( IP 343 )
Enter a task list type ( IP 344 )
Task list type not supported ( IP 345 )
SYSTEM: task list status & does not exist ( IP 347 )
Task list not free for use ( IP 348 )
New maintenance planner group has default order type & ( IP 349 )
Maintenance item has no object -> function not possible ( IP 350 )
Maintenance item has no assembly -> function not possible ( IP 351 )
Maintenance item has no object -> function not possible ( IP 352 )
Maintenance item already assigned to the maintenance plan ( IP 353 )
Last maintenance item of the maintenance plan ( IP 354 )
Task list data reversed because of change of object ( IP 355 )
Task list entered not suitable for strategy: & ( IP 356 )
First maintenance item of the maintenance plan ( IP 360 )
Task list not yet saved ( IP 361 )
No task list has yet been assigned to the maintenance item ( IP 362 )
Maintenance item and sales document have different controlling areas ( IP 365 )
Sales document & & is canceled ( IP 368 )
Check the settlement rule ( IP 369 )
Change of order type -> check the settlement rule ( IP 370 )
Entered counter reading greater than last entered counter reading ( IP 374 )
The purchase order item has no goods receipt indicator ( IP 383 )
Counter &2 is proposed from reference object &1 ( IP 385 )
Check whether a counter has been proposed for all counter intervals ( IP 386 )
Only cycle set allowed for multiple counter plans ( IP 387 )
No cycle set allowed for strategy task lists ( IP 388 )
Purchase order has no GR-related invoice verification ( IP 389 )
Purch. order for maint. item requires account assignment cat. 'U' or 'F' ( IP 390 )
No service entry sheet could be generated -> long text ( IP 391 )
Caution: Maintenance plan already scheduled, check scheduling ( IP 392 )
The maintenance plan only allows task lists without a strategy reference ( IP 393 )
The settlement profile of the order type does not allow a settlement ( IP 394 )
Sales document & & is canceled ( IP 395 )
Enter a piece of equipment as reference object ( IP 396 )
Enter a functional location as reference object ( IP 397 )
Release not possible as MaintPlan already released, called or skipped ( IP 400 )
Maintenance plan &1: Predecessor (call number &2) still on hold ( IP 401 )
Fixing not possible as MaintPlan already released, called or skipped ( IP 403 )
Call can no longer be skipped ( IP 405 )
No maintenance packages exist for maintenance item & ( IP 406 )
Call on & will be skipped ( IP 407 )
No order exists for maintenance date &, maintenance item & ( IP 408 )
Rescheduling necessary because of change in package ( IP 410 )
New completion confirmation date is before the old CompConf. date & ( IP 413 )
Fixing not possible --> date already called ( IP 416 )
Fixing date not possible before previous completion confirmation date ( IP 417 )
Fixing date is before the previous planned date ( IP 418 )
Fixing date is after the next planned date of & ( IP 419 )
Shift > 100% is not allowed ( IP 420 )
Tolerances > 100% are not allowed ( IP 421 )
Cycle Modification factor must be a whole number with key date scheduling ( IP 422 )
No start offset has been set ( IP 423 )
Original schedule restored ( IP 425 )
Maintenance plan & still without maintenance packages ( IP 426 )
Scheduling record already confirmed ( IP 428 )
Call horizon > 100% is not allowed ( IP 429 )
Maintenance plan preview not possible ( IP 432 )
No scheduling notifications exist ( IP 433 )
Order for maintenance date &, maintenance item & ( IP 434 )
No maintenance call object exists for planned date & ( IP 435 )
Function not possible as scheduling currently locked ( IP 437 )
No order number was read ( IP 438 )
Scheduling not possible, no maintenance items have yet been assigned ( IP 439 )
Further scheduling not possible until last call is confirmed ( IP 440 )
The maintenance schedule has not been assigned a task list ( IP 441 )
Planned date & cannot be confirmed ( IP 442 )
Inconsistency with object list number: & ( IP 443 )
Caution: Possible deletion of data entered when selecting ( IP 444 )
Skipping of this call not possible ( IP 445 )
Warning: Planned date with call number &1 cannot be confirmed ( IP 446 )
No annual performance entered for measuring point & ( IP 447 )
No counter reading entered yet for unit, & measuring point & ( IP 448 )
Scheduling will occur with a start offset ( IP 449 )
Scheduling will be performed based on current counter readings : & ( IP 450 )
No active maintenance cycles exist ( IP 451 )
A start in the cycle was executed for maintenance plan &1 ( IP 452 )
Scheduling performed on the basis of current counter readings ( IP 454 )
Only ONE time-based maintenance cycle without counter allowed at a time ( IP 455 )
No counter assigned for performance-dependent maintenance cycles ( IP 456 )
No editing of maintenance items for service processing purchasing ( IP 457 )
Predecessor to & not yet confirmed ( IP 459 )
Maintenance plan &: Order created without reference to the task list ( IP 460 )
Task list & & & does not belong to the equipment ( IP 461 )
Task list & & & does not belong to the functional location ( IP 462 )
Select a counter ( IP 463 )
No maintenance plan was scheduled ( IP 464 )
A counter could not be defined for the reference object ( IP 465 )
You have not entered a reference object in the maintenance item ( IP 466 )
Annual performance of counter & is less than or equal to 0 ( IP 467 )
The customer enhancement IPRM0005 (active) requires a start in the cycle ( IP 468 )
Maintenance plant & planning plant of task list/gen. task list different ( IP 470 )
Maint. plan generates notifications; package selection may be irrelevant ( IP 471 )
No task list was integrated with the maintenance item ( IP 473 )
No reference object is maintained for the counter proposal ( IP 474 )
Maintenance-item-relevant data was changed in the reference object ( IP 476 )
The cycle set sequence of this cycle cannot be changed ( IP 483 )
The cycle including the cycle set sequence cannot be deleted ( IP 484 )
Basic dates of order &1 are adjusted after saving ( IP 495 )
Basic dates of order &1 are adjusted ( IP 496 )
Start dates of notification &1 adjusted after being saved ( IP 497 )
Start dates of notification &1 have been adjusted ( IP 498 )
Dates updated beginning with date &1; Maintenance plan &2 ( IP 499 )
No maintenance item was selected. See long text. ( IP 501 )
Maintenance plans which are used in PRT equipment: & ( IP 564 )
Maintenance plans for which unconfirmed calls exist: & ( IP 565 )
Maintenance plans which are locked: & ( IP 566 )
No authorization to set the deletion indicator: & ( IP 567 )
You have not maintained any selection conditions: no selection occurs ( IP 571 )
There are no calls for maintenance plan & ( IP 602 )
Maintenance plan &1 was restarted several times ( IP 604 )
Maintenance plan & already blocked, maint.plan simulation not possible ( IP 605 )
Fixed calls no longer convertible in normal calls on hold ( IP 609 )
System error when reading order no. & ( IP 610 )
Call cannot be changed ( IP 613 )
The moved sequence contains fixed dates which are exceeded ( IP 617 )
Prev.maint.plan & is not displayed (multiple counter plan) ( IP 618 )
You do not have authorization for maintenance plan & ( IP 620 )
Preventive maintenance plan simulation not possible: no authorization ( IP 621 )
You do not have authorization to change calls for maintenance plan & ( IP 622 )
No processed maintenance plans available for maintenance plan simulation ( IP 623 )
No calls exist for maintenance plan & in the analysis period ( IP 624 )
You can also find the collected messages in the message log ( IP 626 )
Maintenance items that were found cannot be displayed ( IP 627 )
No maintenance plans with calls were found ( IP 628 )
You do not have authorization for maintenance item & ( IP 629 )
Maintenance plan & already has deletion indicator, so no graphic display ( IP 630 )
No maintenance plan simulation possible ( IP 631 )
No capacity display possible owing to incorrect task list data ( IP 632 )
No maintenance items selected owing to maintenance plan status set ( IP 633 )
Incomplete simulation of additional dates for maintenance plan &1 ( IP 634 )
Outline agreement or outline agreement item not available ( IP 651 )
Outline agreement item not available ( IP 652 )
Outline agreement expired ( IP 653 )
Order default values not maintained for service product & ( IP 654 )
No task list is maintained in the order default values for & ( IP 655 )
Task list &1 &2 &3 already deleted ( IP 656 )
Task list &1 &2 &3 cannot be used owing to deletion flag set ( IP 657 )
Use a maintenance plan category with reference to the outline agreement ( IP 658 )
Maintenance plan &3 already exists for contract item &1 &2 ( IP 659 )
Program error for & ( IP 660 )
Outline agreement item already completed (see overall status) ( IP 661 )
Outline agreement item is partially rejected ( IP 662 )
Outline agreement item is rejected ( IP 663 )
Outline agreement item is incomplete ( IP 664 )
Use a maintenance plan category without reference to outline agreement ( IP 665 )
Maintenance plan can only be scheduled until end of contract ( IP 670 )
A fixed date may not exceed the contract end & ( IP 671 )
A manual maintenance call may not exceed the contract end & ( IP 672 )
Task list category not allowed for this maintenance plan category ( IP 675 )
Order type not allowed for the maintenance plan category ( IP 676 )
No date could be determined for plan &1 within the contract term ( IP 678 )
Strategy & has no packages ( IP 702 )
All onetime packages for maintenance plan & have been called ( IP 704 )
No operations can be determined for plan &1 and item &2 for this date ( IP 710 )
No package selected ( IP 711 )
Save or reverse the manual call first ( IP 713 )
Manual call not possible as scheduling already carried out ( IP 714 )
Maintenance plan already scheduled ( IP 715 )
No further maintenance calls attached ( IP 716 )
Negative extrapolation value: Maintain counter reading ( IP 717 )
No call object issued for item &1 and call &2 ( IP 719 )
No call for maintenance item & occurs despite due date ( IP 723 )
The original planned date is reproduced ( IP 724 )
No call object exists because the relation object was inactive at call ( IP 726 )
No meas.document available before &1 and &2 for counter &3. Plan &4 ( IP 728 )
Counter reading for counter &1 and time &2 &3 not up to date ( IP 729 )
End Date for Scheduling you entered is not valid ( IP 736 )
Start of Cycle equals or is greater than End Date for Scheduling & ( IP 737 )
End Counter for Scheduling equals or is less than Last Counter Reading ( IP 740 )
Scheduled calls may remain after modifying End Counter for Scheduling ( IP 741 )
Scheduled calls may remain after modifying End Date for Scheduling ( IP 742 )
Manual call is greater than End Date for Scheduling & ( IP 743 )
Place the cursor on the screen section you want to scroll ( IP 761 )
Maintain the corresponding date ( IP 762 )
Function of the Stability Study is Incorrect ( IP 763 )
Maintain the cycle length ( IP 803 )
Maintain the offset ( IP 805 )
Maintain an offset for packages that are not called regularly ( IP 807 )
Maintain the hierarchy ( IP 808 )
Scheduling parameters are reset ( IP 811 )
Key date scheduling not possible ( IP 813 )
Strategy & is used in maintenance task lists ( IP 815 )
Strategy & is used in maintenance items ( IP 816 )
Strategy & is used in maintenance schedules ( IP 817 )
Strategy package & & is used in equipment task lists ( IP 818 )
Strategy & & is used in general maintenance task lists ( IP 819 )
Start schedule already reached ( IP 828 )
Specify the cycle duration or the offset ( IP 829 )
No order exists for maintenance plan &, call number & ( IP 831 )
Maintain the factory calendar for the strategy ( IP 832 )
Strategy package & & is being used in the plan by a FunctLocation ( IP 835 )
Save the maintenance strategy first ( IP 836 )
No package sequence display for cycle sets for multiple counter plans ( IP 839 )
Assignment not possible --> maintenance item is already assigned ( IP 841 )
Assignment not possible --> maintenance strategies are not the same ( IP 842 )
Strategy plan not allowed for maintenance plan category & ( IP 844 )
You are not authorized to change strategy & ( IP 848 )
Maintenance item & is not assigned to any maintenance plan ( IP 863 )
Error calling up function module IWP3_READ_T399W ( IP 864 )
&1 of reference maintenance plan does not match &2 of maintenance plan ( IP 870 )
Reference maintenance plan is not a copy template ( IP 871 )
Reference maintenance plan is not a copy template ( IP 873 )
Enh. multiple counter plan can no longer be deactivated after the save ( IP 888 )
Planned date for maintenance plan &1 was scheduled for 00.00.0000 ( IP 889 )
Key-date scheduling for strategy is not possible ( IP 890 )
Maintenance plan &1 cannot be changed ( IP 898 )
Strategy cannot be changed ( IP 899 )
Preceding document missing in system for doc.&1, year &2, post.line &3 ( IPM_CR 002 )
The associated G/L line is missing for document &1, year &2, post.line &3 ( IPM_CR 003 )
Ledger &1 has not been configured for document distribution ( IPM_CR 006 )
Posting for reversal document &1 year &2 first takes place with new bdoc. ( IPM_CR 007 )
Cancellation document written off immediately due to clearing references ( IPM_CR 008 )
The system was unable to determine any RFC destination for the CRM system ( IPM_CRM 001 )
Unable to determine ID of IP with GUID &1 ( IPM_CRM 002 )
Unable to determine IP with ID &1 ( IPM_CRM 003 )
IPM system unavailable ( IPM_CRM 004 )
&1 structure has no &2 field (Check your entry) ( IPM_SD 001 )
Serious error has occurred ( IPM_SD 703 )
iPPE change pointers could not be read ( IPPECIF 000 )
iPPE: &1 filter objects of type &2 automatically transferred ( IPPECIF 002 )
iPPE: Error selecting dependent filter objects ( IPPECIF 003 )
iPPE: Selection error ( IPPECIF 004 )
iPPE: &1 filter objects, type SA, have been automatically included ( IPPECIF 005 )
Errors occured during the explosion in &1 ( IPPECIF 008 )
Resource node &1 could not be read ( IPPECIF 010 )
Mode &1 not completely transferred to the APO ( IPPECIF 011 )
Data could not be converted to APO structures ( IPPECIF 013 )
Relationship type not supported in Standard APO 3.0 ( IPPECIF 014 )
Error while transferring iPPE data into the system &1 ( IPPECIF 017 )
Deletion of production version &1 in SCM is not possible ( IPPECIF 022 )
All production versions with deletion indicator are deleted ( IPPECIF 023 )
Transaction PPECIF01 is no longer valid ( IPPECIF 098 )
Assignment differs (supply area/reporting point) ( IPPECIF 136 )
Assignment between alternative/line balance and node is incorrect ( IPPECIF 187 )
The change pointer for line balance &1 is not processed ( IPPECIF 220 )
Release to APO System &1 could not be determined. ( IPPECIF 501 )
APO Release &1 is not supported. ( IPPECIF 502 )
The production version &1 / &2 / &3 was not found. ( IPPECIF 510 )
Deletion was canceled ( IPPECIF 511 )
Selected iPPE object &1 does not exist in ERP system ( IPPECIF 512 )
Selected iPPE object &1 could not be read ( IPPECIF 513 )
Invalid combination of parameters created &1 &2 &3 &4 ( IQ 008 )
Parameter &1 not set ( IQ 009 )
IBase category not completely maintained in Customizing ( IQ 011 )
Parameter 'valid from' (valfr) has value &1 ( IQ 013 )
Parameter 'valid to' (valto) has value &1 ( IQ 014 )
No profiles have been entered in your user master ( IQ 051 )
Your user master record has been constructed incorrectly ( IQ 052 )
The system cannot execute the operation ( IQ 095 )
Internal error in module/form/function ( IQ 096 )
The specified criteria are not sufficient for performing a search ( IQ 097 )
Handle &1 does not exist ( IQ 098 )
Error in configuration storage/IBase ( IQ 099 )
Equipment &1 does not exist in any IBase ( IQ 114 )
Complete the material number for the serial number ( IQ 115 )
Equipment &1 exists in more than one IBase ( IQ 119 )
Equipment &1 exists in IBase &3 and not in &2 ( IQ 120 )
Specify either the equipment number or the serial number ( IQ 121 )
Serial number &2 for material &1 does not exist in any IBase ( IQ 122 )
Serial number &2 for material &1 is in another IBase ( IQ 123 )
Serial number &1 is assigned to material &2 but not to material &3 ( IQ 124 )
Serial number &2 for material &1 is in more than one IBase ( IQ 125 )
Material &1 exists in another IBase ( IQ 126 )
Material &1 is not assigned to IBase &2 ( IQ 127 )
The IBase for material &1 could not be determined ( IQ 128 )
Equipment &1 is already assigned to an IBase ( IQ 129 )
Equipment &1 is already assigned to this IBase ( IQ 131 )
No object specified for the assignment ( IQ 132 )
The clipboard contains materials with individual objects ( IQ 133 )
Serial number &2 for material &1 is already assigned to this IBase ( IQ 134 )
It is only possible to display this type of IBase ( IQ 135 )
Installed bases of type &1 cannot be created manually ( IQ 136 )
Serial number &2 for material &1 is already assigned to an IBase ( IQ 137 )
No original was found for the document master record ( IQ 141 )
This function is not available for the current component ( IQ 142 )
Installed base &1 may not be used as a template ( IQ 144 )
Functional location &1 exists at more than one installed base ( IQ 147 )
Functional location &1 already assigned to this installed base ( IQ 148 )
Object to be inserted is not of valid object type ---> Long text ( IQ 149 )
Functional location &1 already assigned to an installed base ( IQ 150 )
Functional location &1 exists at installed base &2 but not at &3 ( IQ 152 )
Functional location &1 not installed at any installed base ( IQ 153 )
Not all objects are displayed due to the large quantity of data ( IQ 155 )
It is only possible to display this type of IBase ( IQ 157 )
You are not allowed to create objects for installed bases of type &1 ( IQ 158 )
Object may not be inserted ( IQ 159 )
Assignment of partners not possible in this system ( IQ 162 )
No object selected ( IQ 163 )
You have changed the object assignment! The new object was assigned ( IQ 164 )
Object cannot be assigned to this installed base ( IQ 180 )
Historic change not permitted; object cannot be assigned ( IQ 181 )
Name & is invalid ( IQAPI 110 )
Query names that begin with 'SYST' are not permitted ( IQAPI 203 )
Report &1 output contains currency field w/o reference (structure &2). ( IQAPIX 141 )
Report &1: hyphens in output fields, renaming &2 to &3 not possible. ( IQAPIX 142 )
Query generation: sorting and intermediate sums not taken into account. ( IQAPIX 152 )
Measuring point & does not exist ( IR 001 )
Measuring point being processed by user & -> only display possible ( IR 003 )
Lock management not available -> only display possible ( IR 004 )
Measuring points not ready for entry are being edited elsewhere ( IR 005 )
& measuring points are being processed elsewhere and cannot be deleted ( IR 006 )
MeasPoint & currently locked -> document processing not possible ( IR 007 )
MeasPoint &1 does not belong to &2 &3 ( IR 008 )
& MeasPoints will not be deleted as MeasDocuments already exist ( IR 009 )
Reference measuring point & does not exist ( IR 010 )
& MeasPoints will not be deleted: still in use in maintenance plans ( IR 011 )
MeasDocument is being processed by user & -> only display possible ( IR 013 )
MeasPoint inactive: entry of new MeasDocs not possible ( IR 014 )
You cannot copy from a reference measuring point ( IR 015 )
No change authorization -> only display possible ( IR 017 )
& MeasDocs cannot be deleted as they already exist in the database ( IR 018 )
Measurement document & does not exist ( IR 020 )
The year figure in the date is too large (typing error?) ( IR 022 )
Measurement time cannot be in the future ( IR 023 )
A positive value must be entered for the counter reading difference ( IR 024 )
Counter reading must be less than the counter overflow reading ( IR 025 )
The counter reading must be a positive value (or zero) ( IR 026 )
Document & already entered for the measurement time specified ( IR 027 )
Counter reading same as in the previous document & ( IR 028 )
Enter counter reading or counter reading difference ( IR 029 )
Measuring point category & not defined ( IR 030 )
Counter reading smaller than in previous document & ( IR 032 )
Counter reading larger than in previous document & ( IR 033 )
Measuring point is used in maintenance plan scheduling ( IR 034 )
The counter reading entered will lead to a counter overflow ( IR 036 )
Document & already entered for the measurement time specified ( IR 037 )
Only characteristics with a numerical format can be used ( IR 040 )
New charact. has diff. dimension -> dependent fields will be initialized ( IR 041 )
Only characteristics with a unit of measurement can be used ( IR 042 )
Enter a numerical characteristic before entering a number ( IR 043 )
Assign a characteristic and/or a code group ( IR 045 )
You must allocate a numerical characteristic for counters ( IR 046 )
MeasPoint &1 was allocated characteristic w. internal no. &2 ( IR 047 )
Dec. places and exp. f. float. point display copied from characteristic ( IR 048 )
Characteristic not allowed: different dimension ( IR 049 )
Only positive values are allowed for the overflow reading ( IR 050 )
Target value outside measurement range limits ( IR 051 )
Measurement reading outside the measurement range limits ( IR 053 )
MeasPoint &1: counter reading falls above maximum total counter reading ( IR 054 )
MeasPoint &1: counter reading falls below minimum total counter reading ( IR 055 )
Characteristic does not allow a negative valuation ( IR 056 )
Conversion of MeasPoint & to a counter (or other way round) not possible ( IR 057 )
Changing the counter direction is no longer possible ( IR 058 )
The counter must run forwards for interval documents ( IR 059 )
Measuring point category & is not allocated a catalog type ( IR 060 )
Object category not allowed for measuring point objects ( IR 061 )
& measurement points not deleted: still used as PRT in order ( IR 063 )
& measurement points not deleted: still used as PRT in task list ( IR 064 )
Measuring point &1 has no change authorization in this system ( IR 066 )
MeasRange unit has a different dimension to the characteristic unit ( IR 070 )
Document MeasUnit has a different dimension to the characteristic unit ( IR 071 )
MeasReading transfer: Measuring points have deviating characteristics ( IR 073 )
MeasPoints incomplete: no authorization for creation of MeasDocs ( IR 084 )
Maintain the code group for MeasPoint & ( IR 090 )
No code group defined for measuring point &. -> Valuation not possible ( IR 093 )
Enter either a counter reading or a counter reading difference ( IR 094 )
Meas. doc. &1 cannot be changed at present, as meas. point &2 is locked ( IR 096 )
Characteristic &1 can only be used for results transfer from QM ( IR 100 )
Measuring point &1 does not allow direct entry of measurement documents ( IR 101 )
Database update failed ( IR 129 )
& measuring points copied from the copy reference ( IR 130 )
Measurement position is not unique -> see long text ( IR 140 )
Several measuring points with measurement position & ( IR 141 )
MeasDocs have already been entered for the order operation ( IR 143 )
MeasPoint is a counter -> check maintenance plan scheduling data ( IR 144 )
Caution! - &1 subsequent documents have already been created ( IR 145 )
&2 subsequent MeasDocs were changed for MeasPoint &1 ( IR 146 )
MeasDoc. & has lead to measurement readings being copied ( IR 147 )
Measuring point &2 locked by user &1 -> Structure changes not possible ( IR 148 )
Measurement reading transfer stopped for &1 measuring points ( IR 149 )
Measuring point &2 cannot be forwarded to meas. point &1 (recursiveness) ( IR 150 )
Transfer measurement readings to a measuring point of the same object? ( IR 151 )
MeasPoint has different characacter -> MeasReading transfer not possible ( IR 152 )
Measurement reading transfer is defined for the measuring point ( IR 155 )
Measurement reading transfer to object & ( IR 156 )
Measurement reading transfer in the sub-structure of object & ( IR 157 )
Measurement reading transfer to object & and in its sub-structure ( IR 158 )
Measurement reading transfer usually only within object hierarchies ( IR 159 )
Copying of MeasReadings incomplete: & MeasPoints locked ( IR 161 )
Measuring point &2 locked by user &1 -> Measurement readings not copied ( IR 162 )
Measurement reading transfer for measuring point & defined recursively ( IR 164 )
Measurement reading transfer defined for measuring point & ( IR 165 )
MeasReadings will be copied to the MeasPoints listed when you save ( IR 167 )
Measurement reading transfers still to be taken up for meas. point &1 ( IR 169 )
MeasDoc. & no longer corresponds w. MeasPoint definition (see long text) ( IR 170 )
Counter reading in doc. &1 larger than in subsequent doc. &2 ( IR 171 )
Counter reading in doc. &1 smaller than in subsequent doc. &2 ( IR 172 )
Enter a substitute document for measurement document &1 ( IR 173 )
&1 measurement documents canceled, &3 measurement documents changed ( IR 174 )
All transfers successfully taken up ( IR 175 )
The remaining entries should be processed manually ( IR 176 )
Only take up transfer from measurement document &1 ( IR 177 )
There are measurement reading transfers to be taken up again ( IR 178 )
Conflict of document &1 with meas. point &2 for meas. reading transfer ( IR 179 )
Reference MeasPoint does not come from the construction type allocated ( IR 184 )
The reference MeasPoint does not come from the RefLocation assigned ( IR 185 )
RefMeasPoint has a different dimension -> assignment not possible ( IR 186 )
No transfer of measurement/counter readings was defined ( IR 200 )
Flag only one measuring point per block ( IR 202 )
Measuring point &1 locked -> Measurement reading transfer not defined ( IR 203 )
No defaults could be determined for measurement reading transfer ( IR 204 )
Another measurement reading transfer is defined for measuring point &1 ( IR 205 )
The validity period cannot be negative ( IR 208 )
Further measuring points exist ( IR 212 )
"Valid from" = "Valid to" -> Transfer dependency canceled! ( IR 214 )
Validity end date must not lie in the future ( IR 215 )
"Valid to" entry not possible due to conflict ( IR 217 )
Date lies before &1 -> Please check ( IR 219 )
&1 measuring points not deleted: Measurement reading transfer defined ( IR 220 )
No valid measurement reading transfer relationship exists on &1 at &2 ( IR 221 )
Measurement reading transfer is still active ( IR 222 )
&1 measurement reading transfers taken up ( IR 230 )
Interval documents cannot be canceled manually ( IR 251 )
Interval documents are already available ( IR 254 )
Interval document &1 cannot be split ( IR 255 )
Conflict with source document for interval document &1 ( IR 256 )
Interval documents are not supported in this client ( IR 258 )
Some measurement points are already configured to interval documents ( IR 259 )
Measuring point & is inactive ( IR 300 )
Counter overflow reading is less than counter reading in meas. doc. &1 ( IR 401 )
Measuring point &1 is not available; it is a reference measuring point ( IR 504 )
& Ref.Meas.Pt was not deleted. There are meas.docs at dependent meas.pts. ( IR 510 )
Measurement transfer for ref. meas. points only inside the object hierary ( IR 519 )
Not all meas.points from the meas. reading transfer could be determined ( IR 666 )
No database delimitation performed (selection options are blank) ( IR 711 )
Insufficient meas. docs available for measuring point &1 in long periods ( IR 715 )
Insufficient meas. docs available for measuring point &1 in short periods ( IR 717 )
No long period maintained for costing procedure &1 ( IR 718 )
No short period maintained for costing procedure &1 ( IR 719 )
Incorrect measurement reading transfer &1 ( IR 752 )
No measurement reading transfer with interval documents (Customizing) ( IR 762 )
Internal error in function module & ( IR 897 )
Object type &1 does not have any fields for instance det. for inheritance ( IRM_BO_FOR_BS 031 )
Missing values for field &3 for instance determination for inheritance ( IRM_BO_FOR_BS 032 )
Object type &1 could not determine any instances for rule inheritance ( IRM_BO_FOR_BS 033 )
Missing field value for the determination of linked instances ( IRM_BO_FOR_BS 039 )
Missing value for field &2 for rule determination for object &1 ( IRM_BO_FOR_BS 040 )
Missing entries for field determination for field &2 of object &1 ( IRM_BO_FOR_BS 041 )
Date &3, which was transferred as start time &2 is invalid ( IRM_BO_FOR_BS 043 )
Only one date only may be entered for a start time (&2) ( IRM_BO_FOR_BS 044 )
Missing implemention of method &3 of BAdI &2 for object type &1 ( IRM_BO_FOR_BS 047 )
Retention Medium Cannot Be Set As the Rule Is Inherited ( IRM_BO_FOR_BS 067 )
You Do Not Have the Authorization to Change Anything on this Cat Level ( IRM_BO_FOR_BS 201 )
A policy with selected fields cannot be created ( IRM_BO_FOR_BS 240 )
There are multiple registrations for archive object &1 ( IRM_BO_FOR_BS 401 )
Archiving Object &2 Is Already Registered for Object Type &1 ( IRM_BO_FOR_BS 402 )
Register Field &1 Either for Direct or Callback Determination ( IRM_BO_FOR_BS 410 )
You have not defined a results structure for policy cat &2 and obj.cat.&1 ( IRM_CORE 141 )
New mand. fields not allowed; policy categories are already registered ( IRM_CORE 147 )
No policy types registered for the selected policy category &1 ( IRM_CORE 238 )
Start time &1 has not been defined ( IRM_CORE 266 )
You cannot create any more specific policies ( IRM_CORE 404 )
You cannot create any more general policies ( IRM_CORE 405 )
Catalog changes are only possible on the policy category level ( IRM_CORE 419 )
You are not authorized to display all IRM policies ( IRM_CORE 435 )
Object type &1 is still in use in object category-specific customizing ( IRM_CORE 751 )
Complete your entries in partial dialog &1 ( IRM_CORE 752 )
Name &1 contains impermissible characters ( IRM_CORE 801 )
The value of field &2 for object type &1 is not known ( IRM_OBJ_CAT_COMMON 034 )
The implementation of method &4->&3 is missing for object type &1 ( IRM_OBJ_CAT_COMMON 037 )
Policies for policy category &2 are incomplete for object type &1 ( IRM_OBJ_CAT_COMMON 084 )
For object type &1, policy category &2 has no policies ( IRM_OBJ_CAT_COMMON 087 )
Define a (live) rule for policy type &2 of object type &1 ( IRM_OBJ_CAT_COMMON 134 )
Error in control processing (see long text) ( IRW_LT 018 )
Table &1 is excluded from extraction (see long text) ( IRW_LT 019 )
Table &1 is not extracted; process stopped (see long text) ( IRW_LT 020 )
Table &1 does not exist (See long text) ( IRW_LT 021 )
Object &1 inconsistent, table &2 not valid (see long text) ( IRW_LT 030 )
RFC connection &1 not found (see long text) ( IRW_LT 032 )
Entered mass transfer ID &1 is not valid (see long text) ( IRW_LT 035 )
Input table &1 not found or not active (see long text) ( IRW_LT 036 )
RFC connection &1 to legacy system failed (see long text) ( IRW_LT 037 )
Header entry does not exist (see long text) ( IRW_LT 043 )
Header entry already exists (see long text) ( IRW_LT 046 )
Parent table not found in structure definition model (see long text) ( IRW_LT 047 )
Archiving object &1 is inconsistent (see long text) ( IRW_LT 054 )
Configuration &1 is inconsistent (see long text) ( IRW_LT 055 )
Header entry should have lowest sequence number(see long text) ( IRW_LT 080 )
Maintenance plant & not present ( IS 004 )
Error on locking ( IS 005 )
Enter a valid partner determination profile for the object category ( IS 006 )
Partner determination profile does not exist ( IS 007 )
Equipment category & does not exist ( IS 008 )
Enter a partner determination profile first ( IS 009 )
This screen has not been processed yet ( IS 010 )
Partner functions already assigned will be refreshed ( IS 011 )
PrtnrFunction & not defined in PrtnrDetermnProc. & ( IS 012 )
Functions will be reset as no procedure has been allocated ( IS 013 )
Internal error on parametrization of FM PM_PARTNER_SYNC_OBJECT ( IS 016 )
Inconsistency in status management for serial number & & ( IS 017 )
Partner function & has an invalid partner type ( IS 018 )
The partner function entered is not unique ( IS 019 )
Reference indicator &: Choose another activity ( IS 020 )
Data was copied from the superior piece of equipment ( IS 024 )
Data was transferred from the functional location ( IS 025 )
No internal number range defined for equipment category ( IS 036 )
No external number range defined for equipment category ( IS 037 )
Number range & does not exist for ILOA ( IS 038 )
Number range & does not exist for equipment ( IS 039 )
Number range & does not exist ( IS 040 )
Number range & is not an external range ( IS 041 )
Equipment number & not in external number interval ( IS 042 )
Error during equipment number assignment ( IS 043 )
Equipment category does not allow alphanumeric equipment number ( IS 044 )
Field contains invalid characters ( IS 045 )
Blanks are removed from the equipment number ( IS 046 )
Equipment not classified ( IS 050 )
Customer & does not exist ( IS 051 )
End customer & does not exist ( IS 052 )
Operator & does not exist ( IS 053 )
&1 usage period(s) exist for today's date ( IS 059 )
External status & not defined ( IS 060 )
Entry & or & missing for configuration control ( IS 064 )
Configuration: no link to config. for configurable material ( IS 065 )
Configuration: no config. characteristics for config. material & ( IS 066 )
Configuration: config. material & not allowed for configuration ( IS 067 )
Configuration: error on locking configurable material & ( IS 068 )
Config. not possible for config. material & (reason: &) ( IS 069 )
'Valid-from' date is in the future ( IS 071 )
Enter equipment category ( IS 075 )
No change possible as RefEquipCategories & and & are different ( IS 076 )
The equipment category of the reference will be copied ( IS 078 )
Plants & and & different -> equipment plant will be copied ( IS 079 )
No authorization for maintenance plant & ( IS 081 )
No authorization for planning plant & ( IS 082 )
You have no authorization for authorization group & & ( IS 083 )
Partner DetermProced. different: change of EquipCat. not allowed ( IS 084 )
The number ranges of the equipment categories are different ( IS 085 )
Please check for inconsistencies as a result of the change ( IS 087 )
Status profiles & and & are different. Changes not possible. ( IS 088 )
Equipment address has not been maintained ( IS 090 )
Address was created, and reference to superior object deleted ( IS 092 )
Reference to address of superior object was deleted ( IS 094 )
Maintain the MaintPlant before changing the functional location ( IS 095 )
Maintain maintenance plant before defining equipment hierarchies ( IS 096 )
Address was copied from superior object ( IS 099 )
The last number from the interval & was assigned ( IS 100 )
Number range & is full ( IS 101 )
Equipment & is inactive ( IS 105 )
The equipment is flagged for deletion ( IS 106 )
The equipment is flagged for deletion. Only possible to display. ( IS 107 )
No change documents generated for equipment category & ( IS 110 )
Enter a material number ( IS 114 )
The current piece of equipment/serial number is already configured ( IS 115 )
The serial number is currently in stock ( IS 116 )
No history-relevant changes to equipment &1 are allowed ( IS 117 )
Serial number &1 already exists for material &2 ( IS 121 )
Enter material and serial number ( IS 122 )
Equipment category selected has no internal number range ( IS 123 )
SerialznProcedure & not maintained for profile & ( IS 124 )
Material serial number profile does not exist ( IS 126 )
Serialization procedure & not valid ( IS 127 )
Serial number master from reference does not exist ( IS 128 )
Specify a plant ( IS 131 )
Enter a serial number ( IS 132 )
Initial entries not allowed -> select 'Cancel' ( IS 133 )
Plant & does not support storage location & ( IS 134 )
Customer & does not exist ( IS 136 )
Serial number & does not exist for material & ( IS 137 )
Serial number & is already allocated to equipment & ( IS 139 )
Serial number &1 is already locked by user &2 ( IS 140 )
Equip. categ. selected is not allocated to ref. categ. 'S' ( IS 141 )
Select serialization procedure first ( IS 142 )
No equipment exists with this serial number ( IS 143 )
Delivery & does not exist ( IS 146 )
Material & is not containted in any item of delivery & ( IS 147 )
Batch or valuation type &1 for material &2 in plant &3 does not exist ( IS 148 )
Enter a 'from' serial number ( IS 149 )
Only purely numerical serial numbers allowed as interval limits ( IS 150 )
'From' serial number is greater than 'to' serial number ( IS 151 )
The no. of serial nos. does not correspond to the interval size ( IS 153 )
Equip. no. requirement contradicts absence of serial no. usage ( IS 154 )
Enter serial number usage and equipment number requirement ( IS 155 )
Status & changed to status & ( IS 156 )
Status not consistent with current location ( IS 157 )
Batch or valuation type &1 for material &2 does not exist ( IS 158 )
Material cannot be changed as a serial no. has been allocated ( IS 159 )
Material not allocated a serial number profile ( IS 160 )
Internal error on synchronization of EQUI-EQSE numbers ( IS 161 )
Your previous change to the serial number status will be lost ( IS 162 )
Calling equipment not possible as status already changed -> Save first ( IS 163 )
Enter a material number ( IS 164 )
Enter a material number and/or a serial number ( IS 165 )
Serial number & already exists for material & ( IS 166 )
Material & is not a configurable material ( IS 167 )
Material & does not exist in plant & ( IS 169 )
Incorrect selection of parameters for locking serial numbers ( IS 171 )
Different batches and/or valuation types are not allowed ( IS 172 )
Valuation type &1 for material &2 in plant &3 does not exist ( IS 178 )
No configuration exists ( IS 180 )
Configuration is object-specific: no reference exists ( IS 181 )
No valid reference object found for configuration ( IS 182 )
Maintenance not possible - enter configurable material first ( IS 183 )
Maintenance not possible: configuration used as reference -> copy ( IS 184 )
Material &1 has no configuration in plant &2 for stockable types ( IS 185 )
No configuration is maintained in plant & - plant entry ignored ( IS 187 )
Stock control active (profile &3) for material &1 in plant &2 ( IS 192 )
Asynchronous serial-/equipment numbers exist ( IS 195 )
The date of the last goods movement was deleted or backdated ( IS 198 )
Customer-specific check determined that the update is not permitted ( IS 200 )
Customer-specific check determined manufacturer data to be incorrect ( IS 201 )
Equipment view already activated: Deactivation is not possible ( IS 210 )
There is equipment with different material numbers + construction type ( IS 213 )
Not all equipment was converted ( IS 214 )
Serialization with material &1 only possible after saving equipment ( IS 216 )
Serial number for material &1 must be the same as equipment number (&2) ( IS 217 )
UpdateProg.: error &, RC &, no. of records &, no. of inserts & ( IS 225 )
Update program: I/O error &; function &, RC= &, key & ( IS 229 )
Construction type is automatically set from &2 to &1 ( IS 240 )
Construction type is automatically set to &1 ( IS 241 )
Direct change of construction type is not allowed ( IS 242 )
Material number is initial, construction type is &1 ( IS 243 )
Material number (&1) is not the same as construction type (&2) ( IS 244 )
Material number (&1) is not the same as the construction type (initial) ( IS 245 )
Approval has already been granted ( IS 301 )
Deletion not possible because permit & has already been issued ( IS 302 )
Order release permits should be issued ( IS 304 )
Order release permits must be issued ( IS 305 )
Order completion permits should be issued ( IS 306 )
Order completion permits must be issued ( IS 307 )
Permit & does not exist ( IS 308 )
You can not deactivate permit &, order released ( IS 311 )
Select at least one entry ( IS 312 )
Deletion is not possible because permit & was suggested as default ( IS 314 )
Permit &1 has already been assigned to &2 ( IS 315 )
Warranty check: invalid status object number ( IS 353 )
Warranty check: invalid master warranty number & ( IS 354 )
Warranty check: invalid start date & ( IS 355 )
Warranty: Warranty counter without MeasPoint or calendar time indicator ( IS 357 )
Warranty: Alternatively only END date or master warranty no. possible ( IS 358 )
Serial number & & still has no status ( IS 401 )
Maintain the currency for the acquisition value ( IS 403 )
Measuring point & is not defined for the piece of equipment ( IS 404 )
Error during synchronous update ( IS 497 )
Faulty parameter in function module: & can not be blank. ( IS 498 )
Conversion error: Field & is unknown ( IS 500 )
Coversion error in field &: Content & is invalid ( IS 501 )
Conversion error in field &: & is not a valid date ( IS 502 )
No objects exist for the partner number specified. ( IS 503 )
No objects were selected for the criteria specified. ( IS 504 )
Authorization is not available for any of the objects selected. ( IS 505 )
No valuation area is assigned to plant & ( IS 506 )
No company code is assigned to the valuation area & ( IS 507 )
Equipment &1 is not assigned to customer &2 ( IS 520 )
Equipment &1 is not assigned to end customer &2 ( IS 521 )
Equipment &1 is not assigned to operator &2 ( IS 522 )
Recursivity within superior equipment structure & ( IS 765 )
Maintenance catalog & does not exist ( IS 800 )
Material & does not exist ( IS 804 )
Equipment & already exists ( IS 806 )
Currency & not supported ( IS 807 )
Manufacturing country & not defined ( IS 808 )
Weight unit & not defined ( IS 809 )
Equipment & is marked for deletion ( IS 810 )
Equipment number already assigned ( IS 812 )
Equipment &1 is already locked by user &2 ( IS 813 )
Equipment number & not in external interval ( IS 815 )
Double reference -> material will be ignored ( IS 818 )
No changes were made to equipment & ( IS 819 )
Equipment &1 is already locked by user &2 ( IS 820 )
Date is in the future ( IS 829 )
Future date not permitted ( IS 830 )
Equipment & has been changed ( IS 875 )
Confirmation Control Key &1: Type &2 is not defined for &3 ( ISAUTO_COMPL 000 )
&1: &2 does not provide for type &3 ( ISAUTO_COMPL 001 )
&1:&2 requires planning relev., gds rcpt relev. or gds rcpt assignment ( ISAUTO_COMPL 002 )
Item is posted with closing ( ISAUTO_COMPL 004 )
Indicator 'Via Delivery' only makes sense in a return delivery ( ISAUTO_COMPL 005 )
Assign an external plant to goods recipient &1 ( ISAUTO_XLO 001 )
Assign an external purchasing document to delivery &1, item &2 ( ISAUTO_XLO 002 )
Assign an external order item to delivery &1, item &2 ( ISAUTO_XLO 003 )
Assign an internal supplier to order type &1 ( ISAUTO_XLO 004 )
Recipient plant &3 does not belong to the internal company code ( ISAUTO_XLO 005 )
Recipient &3 does not belong to the cross company code ( ISAUTO_XLO 006 )
Save the delivery before the goods issue posting ( ISAUTO_XLO 007 )
In system (&2) assigned purchasing document &1 does not exist ( ISAUTO_XLO 012 )
In system (&1) there are no assigned purchasing document items (&2/&3) ( ISAUTO_XLO 013 )
Supplying plant (&1) does not correspond w. supplying plant &2 & order &3 ( ISAUTO_XLO 014 )
Ext.plant &1 for GR &2 does not correspond to rec. plant &3 for order &4 ( ISAUTO_XLO 015 )
Outbound delivery &1 has a different external ID ( ISAUTO_XLO 019 )
Return delivery &1 has no external ID ( ISAUTO_XLO 020 )
Error during data connection; see long text ( ISAUTO_XLO 024 )
Purchasing document &1 is not flagged for cross-system transit ( ISAUTO_XLO 028 )
You cannot drag & drop this object; see long text ( ISAUTO_XLO 029 )
Error during object creation; see long text ( ISAUTO_XLO 031 )
This assignment does not improve the transit balance ( ISAUTO_XLO 032 )
Email sending failed with error. From or to addresses might be incorrect ( ISA_AUCTION 014 )
Risk information &1 does not exist ( ISH_BP 000 )
Risk information &1 has already been entered ( ISH_BP 001 )
Preferred type of food &1 does not exist ( ISH_BP 002 )
Preferred type of food &1 has already been entered ( ISH_BP 003 )
Forbidden ingredient &1 does not exist ( ISH_BP 004 )
Forbidden ingredient &1 has already been entered ( ISH_BP 005 )
Branch of study &1 does not exist ( ISH_BP 006 )
Branch of study &1 has already been entered ( ISH_BP 007 )
Branch of study &1 is not maintained for physician &2 ( ISH_BP 008 )
No branches of study found for physician &1 ( ISH_BP 009 )
No additional qualifications found for physician &1 ( ISH_BP 010 )
Insurance type &1 does not exist ( ISH_BP 011 )
Member type &1 does not exist ( ISH_BP 012 )
Additional qualification &1 does not exist ( ISH_BP 013 )
Additional qualification &1 has already been entered ( ISH_BP 014 )
Additional qualification &1 is not maintained for physician &2 ( ISH_BP 015 )
Patient authorization can only be set for external physicians ( ISH_BP 016 )
Responsibility type &1 does not exist ( ISH_BP 017 )
Responsibility type &1 has already been entered ( ISH_BP 018 )
Either "From" or "To" is empty ( ISH_BP 019 )
Value in "From" is greater than value in "To" ( ISH_BP 020 )
No search help exists for application &1 and contract category &2 ( ISIS_BAS 001 )
Contract no. &1 for partner &2, contract cat. &3 and appl. &4 invalid ( ISIS_BAS 003 )
Partner &1 cannot be deleted ( ISIS_TOOLS 005 )
Partner &1 and contract &2 have already been assigned in this period ( ISIS_TOOLS 007 )
Down payment request &2 &3 &4 cannot be reversed ( ISJP 004 )
No reversal of tax adjustment posting &1 &2 &3 in Monthly Invoice &1 &4 ( ISJP 005 )
Document to be reversed not relevant to Invoice Summary. ( ISJP 006 )
Invoice Summary recipient &2 currently locked by user &1. ( ISJP 007 )
Invoice Summary line items for recipient &1 and payer &2 exist ( ISJP 116 )
Monthly invoices without Payer invoices exist for recipient &1 ( ISJP 117 )
Confirmation of incoming payment has to be created manually ( ISJP 118 )
Invoice Summary data already exist for customer &1 and company code &2 ( ISJP 123 )
Settings of G/L-account &1 do not allow tax adjustment postings ( ISJP 125 )
Open Periods in Archiving Period ( ISJP 414 )
Line item is already included in Monthly Invoice &1 &2 ( ISJP 602 )
Accounting document &1 &2 &3 created for tax adjustment was not updated ( ISJP 608 )
Payer's Invoice already created at &2. Invoice &3 &1 cannot be created. ( ISJP 609 )
Error occurred. Payer &1 blocked for further invoicing in company &2. ( ISJP 610 )
Tax adjustment posting for monthly invoice &2 &3 failed ( ISJP 613 )
Amount of line item &1 &2 &3 too large for further totalling ( ISJP 617 )
Amount of monthly invoice &1 &2 &3 too large for further totalling ( ISJP 618 )
Amount of payers invoice &1 &2 &3 too large for further totalling ( ISJP 619 )
Monthly Invoice already created at &2. Invoice &3 &1 cannot be created. ( ISJP 653 )
Monthly Invoice &2 &1 is blocked by item &2 &3 &4. ( ISJP 654 )
Invoice &2 &1 cannot be created because payer &3 is blocked for invoicing ( ISJP 655 )
Invoice &2 &1 currently cannot be created. ( ISJP 659 )
Invoice &2 &1 currently cannot be cancelled. ( ISJP 660 )
Maximum number of clearing line items exceeded (&1, &2, &3). ( ISJP 704 )
Virtual account &1 already reused. ( ISJP_EHP4 008 )
Period &1 in fiscal year &2 does not fall within the costing period ( ISMECP_ITEMIZATION 003 )
Error saving pricing key & ( ISMECP_ITEMIZATION 104 )
Use an existing characteristic ( ISMECP_ITEMIZATION 105 )
Enter a valid pricing key ( ISMECP_ITEMIZATION 107 )
Maintain either a cost element interval or a cost element group ( ISMECP_ITEMIZATION 108 )
Enter the start of the cost element interval ( ISMECP_ITEMIZATION 109 )
Use a formula or a function ( ISMECP_ITEMIZATION 110 )
Formula element &1 contains inadmissible characters ( ISMECP_ITEMIZATION 111 )
Document(s) cannot be deleted ( ISM_DM_DOCUMENTS 110 )
Reference(s) cannot be deleted ( ISM_DM_DOCUMENTS 111 )
Document &1 in the version from &2 is not the most recent version ( ISM_DM_DOCUMENTS_ISM 000 )
Document &1 does not exist and will be deleted from artwork assignment ( ISM_DM_DOCUMENTS_ISM 001 )
You do not have authorization to display documents ( ISM_DM_DOCUMENTS_ISM 004 )
You do not have authorization to change documents ( ISM_DM_DOCUMENTS_ISM 005 )
You do not have authorization to create documents ( ISM_DM_DOCUMENTS_ISM 006 )
Indexes for application object &1 cannot be processed ( ISM_DPP 042 )
You are not authorized to display this data; see long text ( ISM_DPP_BLOCKING 002 )
Search results do not contain any blocked business partners ( ISM_DPP_BLOCKING 003 )
Search result does not contain any orders for blocked business partners ( ISM_DPP_BLOCKING 004 )
You cannot change business partner &1; see long text ( ISM_DPP_BLOCKING 006 )
Business partner &1 is blocked ( ISM_DPP_BLOCKING 010 )
Sold-to party &1 is blocked for orders ( ISM_DPP_BLOCKING 011 )
Business partner &1 is blocked for documents ( ISM_DPP_BLOCKING 012 )
Business partner unloading point &1 is blocked ( ISM_DPP_BLOCKING 013 )
Key field of Voucher Copy Assignment &1 is not changeable ( ISM_SE_AM_SO 011 )
Ad Spec Insert: The numbers must begin with the temporary sign (dollar) ( ISM_SE_AM_SO 030 )
BAdI ISM_BADI_PAYMENTFORM for Paymentformcode is not implemented ( ISM_SE_SD_TOOLS 002 )
Unclear assignment of condition category to condition type for Reporting ( ISRE46 000 )
Flow not copied; no SR record for CoCode &1, asset &2, securities acc. &3 ( ISSR 110 )
Data transfer download not defined for list type & of variant & ( ISSR2 013 )
Data transfer list header not defined for list type & ( ISSR2 016 )
Error during data transfer download ( ISSR2 017 )
Incorrect Customizing; data transfer download not possible ( ISSR2 018 )
Customizing assignments missing; NW102 may be missing empty lines ( ISSR2 020 )
Columns not defined in Customizing for list type &1 of variant &2 ( ISSR2 022 )
List output not defined in Customizing; list type &1 not defined ( ISSR2 026 )
Selection not possible or not successful ( ISSR2 032 )
No text defined for variant &1 of list type &2 ( ISSR2 038 )
Number format error in Excel file ( ISSR2 043 )
Error in header entries in Excel file ( ISSR2 044 )
System Error ( ISSR2 047 )
No entries in table &1 for language key &2 ( ISSR 230 )
No statutory reporting variant defined ( ISSR 231 )
Customizing settings not configured; list output not possible ( ISSR 232 )
Initial run not possible; check backup tables ( ISSR 300 )
No beneficiary (borrower) defined for securities account &1 in CoCode &2 ( ISSR3 001 )
Borrower for transaction differs from beneficiary for sec. acc. &1 CC &2 ( ISSR3 002 )
Change not possible; specify different legal bases ( ISSR 301 )
Change not possible; identifier & does not exist ( ISSR 302 )
Update run already executed ( ISSR 303 )
Update run not possible; backup tables do not exist for master data ( ISSR 304 )
Update run not possible; check the prerequisites ( ISSR 305 )
Conversion not possible; check value and control tables ( ISSR 306 )
Conversion not possible; backup tables do not exist ( ISSR 307 )
Error when changing master data records in table & ( ISSR 311 )
Real Estate Management not set to active in company code & ( ISSR 400 )
In company code &, no & exists for business entity ( ISSR 405 )
Company code &1: No asset exists for object &2 in FI-AA ( ISSR 406 )
Super number not maintained for asset &2 subnumber &3 in company code &1 ( ISSR 407 )
No chart of depreciation found in FI-AA for company code & ( ISSR 411 )
You have not assigned int. stock indicators to chart of depreciation & ( ISSR 412 )
Subsection is mandatory for assignment of capital investment to section & ( ISSR 483 )
No positions found ( ISSR 487 )
No corresponding partner changes or positions found ( ISSR 488 )
Additional ISSRPREFLOW entries for co.code &1 asset &2 partner &3 date &4 ( ISSR 489 )
Check table &1 has no entry with &2 &3 ( ISSR 490 )
Entry &3 &4 not found for asset type &2 in table &1 ( ISSR 491 )
Entry &3 &4 not found for product category &2 in table &1 ( ISSR 492 )
Field & can be relevant for individual BaFin reporting ( ISSR 493 )
Field & is a relevant characteristic; make at least one entry ( ISSR 494 )
Changes to asset type in & affect R5/97 Annex 10 identifier ( ISSR 496 )
Identifier & can only be assigned if asset type is opening clause ( ISSR 499 )
No entry exists for &1 with fund type &2 in table TISSR_BOND_FUNDS ( ISSR4_READ 000 )
Statutory reporting variant &2 not defined ( ISSR 501 )
No entry for class &1 in table &2 ( ISSR 508 )
Internal error when implementing extension (see long text) ( ISSR5 090 )
Internal error when implementing extension (see long text) ( ISSR5 091 )
Internal error when implementing extension (see long text) ( ISSR5 092 )
Internal error when implementing extension (see long text) ( ISSR5 093 )
Internal error when implementing extension (see long text) ( ISSR5 094 )
This change caused an inconsistent dataset; see long text ( ISSR 516 )
Valuation area &1 cannot be assigned to company code &2 ( ISSR 603 )
Automatic derivation is off (e.g. for product type or product category) ( ISSR7 003 )
Statutory reporting is not set for the company codes ( ISSR7 004 )
SR product category cannot be determined for feeder system product cat. & ( ISSR7 007 )
SR valuation area cannot be determined; product cat. &1 TR val. area &2 ( ISSR7 008 )
SR product type cannot be derived from feeder system product type & ( ISSR7 009 )
No SR contract type is assigned to SR product type & ( ISSR7 010 )
Cannot determine FTP for FS contr. type &1, FS flow type &2, D/C ind. &3 ( ISSR7 012 )
No text specified for SR flow type &1 in language &2 ( ISSR7 013 )
FS flow type &1 with D/C ind. &2 converted into FTP &3 of ledger type &4 ( ISSR7 014 )
FI document & could not be read ( ISSR7 015 )
System cannot create reference to original record for reversal doc. no. & ( ISSR7 016 )
FI document & for reversal transaction cannot be read ( ISSR7 018 )
Incorrect/missing link in FI: BELNR &, STBLG & ( ISSR7 020 )
Statutory reporting is not active for the company code(s) & ( ISSR7 023 )
Flow already processed in ledger; change not possible ( ISSR7 027 )
Unsaved flows exist; refresh not possible ( ISSR7 028 )
Flows with date before key date & already exist ( ISSR7 031 )
Key date position with date & already exists ( ISSR7 034 )
Migration not possible for Real Estate management ( ISSR7 037 )
Use transaction ISSR_DSUMB for asset category transfer posting ( ISSR 709 )
Selected ledger types/table group not assigned to an FISL ledger ( ISSR7 201 )
FISL ledgers not assigned to selected company codes ( ISSR7 202 )
Statutory reporting is not set for company codes or valuation areas ( ISSR7 203 )
No flows exist in statutory reporting base table ( ISSR7 205 )
FISL ledger not assigned to table group &1 and ledger type &2 ( ISSR7 208 )
Customizing table & contains no entries ( ISSR7 217 )
Output structure for posting log missing for table group: & ( ISSR7 218 )
No user exit variant assigned to statutory reporting variant & ( ISSR7 219 )
No table group assigned to statutory reporting variant & ( ISSR7 220 )
SR flow type for the FTP cannot be determined ( ISSR7 221 )
No statutory reporting identifiers available for selection ( ISSR7 222 )
No identifiers exist for variant &1, company code &2, asset number &3, &4 ( ISSR7 223 )
SR variant & is not assigned a valid segment ( ISSR7 224 )
Key: &1; flow type assignment does not exist for FTP &2 ( ISSR7 225 )
No asset cat. transfer posting flow types defined for FISL ledger & ( ISSR7 229 )
CoCode &1 and SR valuation area &2 are not assigned to any variant ( ISSR7 233 )
No field assignment rules defined in Customizing ( ISSR7 234 )
Error during GUID conversion from C32 to C22 ( ISSR7 237 )
No premium reserve fund flow type is defined for ledger &1 direction &2 ( ISSR7 243 )
System cannot determine number/number range object for variant & ( ISSR7 244 )
Customizing assignment does not exist for company code &1 and ledger &2 ( ISSR7 248 )
For company code &, posting date &, ledger & PERIV (fiscal yr variant) & ( ISSR7 249 )
Exit type &2 or form routine name &3 is missing for receiver field &1 ( ISSR7 250 )
FISL update program & cannot update statutory reporting tables (& and &) ( ISSR7 261 )
Post all parked documents first ( ISSR7 263 )
No class data available; processing terminated ( ISSR7 502 )
Contradictory combination of checkboxes; see long text ( ISSR 751 )
Statutory reporting is not activated ( ISSR7 613 )
Assignment of value to field & not possible ( ISSR 804 )
Application area &1 with type &2 does not exist for exit &3 ( ISSR 811 )
Missing assignment in TISSR_ARGB; system cannot display exit ( ISSR 812 )
Flows for contract & available; changes to BaFin data not possible ( ISSR_MD_ADMIN 004 )
No SR data for variant &4 available in securities account &1 ( ISSR_MD_ADMIN 009 )
No valid dialog mode found for mode & of feeder system ( ISSR_MD_ADMIN 010 )
Valid dialog mode for & not found; display is being initialized ( ISSR_MD_ADMIN 011 )
Master data for contract & currently locked; processing not possible ( ISSR_MD_ADMIN 012 )
Field & is empty; identification number may not be saved correctly ( ISSR_MD_ADMIN 015 )
Asset number & cannot be deleted ( ISSR_MD_ADMIN 022 )
Assignment of statutory reporting variant to dialog was terminated ( ISSR_MD_ADMIN 024 )
Identity number cannot be generated for &1 &2 due to missing data ( ISSR_MD_ADMIN 025 )
System cannot migrate BaFin data for securities acc. &1 in CoCode &2 ( ISSR_MD_ADMIN 031 )
Statutory reporting variant & not in check table TISSR_MARECO ( ISSR_MD_ADMIN 032 )
Country key &1 is not in table &2 ( ISSR_MD_ADMIN 037 )
Stock, LOB, asset type, and PRFL must be maintained in BaFin reporting ( ISSR_MD_ADMIN 038 )
Stock assignment in contract differs from stock ind. &2 in sec. acc. &1 ( ISSR_MD_ADMIN 042 )
Insurance LOB on contract differs from LOB &2 in company code &1 ( ISSR_MD_ADMIN 043 )
Error while checking contract & for existing flows ( ISSR_MD_ADMIN 044 )
System cannot create jump to statutory reporting; maintain SR data ( ISSR_MD_ADMIN 045 )
Combination of contract type &1 and product category &2 is not intended ( ISSR_MD_ADMIN 047 )
Missing entries; SR data cannot be saved ( ISSR_MD_ADMIN 049 )
Securities account maintenance is not permitted for SR variant & ( ISSR_MD_DEPOT 001 )
Backup not saved. Backup for tab. &1 / &2 / &3 exists. ( ISSR_MIG 010 )
No record found with range MASTER_REC_KEY for &1, asset number &2 ( ISSR_READ 002 )
No saved lists of list type '&1&2' exist ( ISSR_STORE_LIST 001 )
List cannot be displayed; error during database selection ( ISSR_STORE_LIST 002 )
List cannot be displayed; error during database selection ( ISSR_STORE_LIST 003 )
List cannot be displayed; error during data record conversion ( ISSR_STORE_LIST 004 )
List cannot be displayed; error in internal list table ( ISSR_STORE_LIST 005 )
Select only one of the saved lists ( ISSR_STORE_LIST 006 )
Enter a name for the list ( ISSR_STORE_LIST 010 )
Save not possible; no selection criteria transferred to &1 &2 ( ISSR_STORE_LIST 011 )
&1 &2 &3 cannot be saved; contact SAP support ( ISSR_STORE_LIST 012 )
Save not possible; contact SAP support ( ISSR_STORE_LIST 013 )
List cannot be saved; maximum number of lists that can be saved reached ( ISSR_STORE_LIST 014 )
Enter name for lists to be backed up ( ISSR_STORE_LIST 017 )
Saving lists of list type &1 is not permitted ( ISSR_STORE_LIST 019 )
Lists have no content; save not possible ( ISSR_STORE_LIST 021 )
No list types exist for statutory reporting variant &1 and list &2 ( ISSR_STORE_LIST 022 )
List &1 &2 saved successfully ( ISSR_STORE_LIST 023 )
Client &: Data records cannot be transferred to table & ( ISSR_TP 002 )
Factory calendar is not maintained for year & ( ISSR_TP 013 )
The total sum of BP change records in statutory reporting is not zero ( ISSR_TP 015 )
Error during creation of BP change records in statutory reporting ( ISSR_TP 016 )
Error while writing to table TISSR_GP_CHANGE; see long text ( ISSR_TP 022 )
Termination during writing of flows caused by business partner changes ( ISSR_TP 023 )
System cannot determine data records for the selection criteria ( ISSR_TP 024 )
Database table &1 does not exist/is not active in the ABAP Dictionary ( ISSR_TP 028 )
Identifier &1 not allowed for identification number assignment ( ISSR_TP 030 )
You can execute function '&' in change mode only ( ISSR_TP 052 )
Error during creation of object & ( ISSR_TP 600 )
Export table & contains no data records ( ISSR_TP 601 )
No data could be selected for asset &1 from table &2 ( ISSR_TP 602 )
No data could be selected for asset & from table & ( ISSR_TP 603 )
No asset class can be determined for object number & ( ISSR_TP 604 )
SR asset type is not assigned a feeder system identifier ( ISSR_TP 605 )
Error during assignment of SR product category and/or SR product type ( ISSR_TP 606 )
Error during determination of SR product type ( ISSR_TP 607 )
Error during determination of SR product category ( ISSR_TP 608 )
No data record found for asset &1 in area &2 ( ISSR_TP 609 )
Data records cannot be selected from table & ( ISSR_TP 610 )
Incorrect Customizing in table & ( ISSR_TP 612 )
Selected data record with DARWIN key & is not assigned an asset category ( ISSR_TP 613 )
Asset with DARWIN key &: Annex 3 R5/97 identifier could not be converted ( ISSR_TP 614 )
PRFL number for asset with VVKEY & (&) cannot be converted ( ISSR_TP 615 )
Database table & is currently locked by user & ( ISSR_TP 618 )
Cannot set database lock for table & ( ISSR_TP 619 )
No data records for deletion found in table & ( ISSR_TP 620 )
Missing Customizing assignments: cannot select from relationship table & ( ISSR_TP 621 )
Import parameter & cannot be assigned to field symbol & ( ISSR_TP 622 )
Data object &1 cannot be assigned to field symbol &2 ( ISSR_TP 623 )
Invalid Annex 10 R5/97 identifier combination for asset &1 in area &2 ( ISSR_TP 625 )
No identifiers set for R5/97 Annex 10 for capital investment & ( ISSR_TP 627 )
Data object &1 could not be assigned to field symbol &2 ( ISSR_TP 628 )
Enter valid identifiers for Annex 10 R5/97 ( ISSR_TP 629 )
Data record contains invalid identifier combination for Annex 10 R5/97 ( ISSR_TP 630 )
No data exists in internal table for asset &1 (line of business &2) ( ISSR_TP 631 )
Data object &1 cannot be assigned to field symbol &2 ( ISSR_TP 632 )
Data object &1 cannot be assigned to a field symbol ( ISSR_TP 633 )
Assign field contents according to check matrix ( ISSR_TP 635 )
Contract &: Prod. cat., asset type, ind. for Annex 10 R5/97 incompatible ( ISSR_TP 636 )
Error during creation of new node table for ALV tree ( ISSR_TP 637 )
Contract &: Prod. cat., asset type, ind. for Annex 10 R5/97 incompatible ( ISSR_TP 638 )
From now, SR variant & will be validated with respect to R5/97 Annex 10 ( ISSR_TP 639 )
SR variant & will no longer be validated with respect to R5/97 Annex 10 ( ISSR_TP 640 )
Error reading from an internal table ( ISSR_TP 641 )
Invalid R5/97 identifier combination for asset &1 in area &2 ( ISSR_TP 644 )
Error while creating ALV tree ( ISSR_TP 645 )
Invalid ind. combination Annex 10 R5/97 for asset no. &1 in area &2 ( ISSR_TP 646 )
No selection parameters were transferred ( ISSR_TP 648 )
Detail display not possible for totals rows ( ISSR_TP 652 )
Error reading selected tree node ( ISSR_TP 653 )
Error during determination of data for new detail view ( ISSR_TP 657 )
Valuation area &: not all selected positions can be displayed ( ISSR_TP 660 )
Select the positions to be transfer posted ( ISSR_TP 661 )
Value entered in field & is not permitted ( ISSR_TP 662 )
Value entered in field & is not permitted/consistent ( ISSR_TP 663 )
Value entered in field & is not permitted/consistent ( ISSR_TP 664 )
For SR variant &, data records cannot be selected from table & ( ISSR_TP 665 )
System cannot create input help for field & ( ISSR_TP 666 )
Error while deleting data records from table & ( ISSR_TP 667 )
Data record with the same key already exists in table ISSR_RPI_MFT ( ISSR_TP 668 )
Reporting data for old and new record identical ( ISSR_TP 669 )
Error while checking reporting data consistency ( ISSR_TP 670 )
Identification number & is in critical area ( ISSR_TP 671 )
System has issued the last available identification number ( ISSR_TP 672 )
There are not enough free identification numbers available ( ISSR_TP 673 )
Field assignment in table & is not correct ( ISSR_TP 674 )
Value of the identification number determined must not be zero ( ISSR_TP 675 )
Customizing error: wrong ID definition indicator set ( ISSR_TP 676 )
External ID number & is not in interval for number range object ( ISSR_TP 677 )
Identification number & already exists ( ISSR_TP 678 )
Identification number & is already being used ( ISSR_TP 679 )
Identification number field in reporting data master record is too short ( ISSR_TP 680 )
Number range interval not defined for to-year & ( ISSR_TP 681 )
Validity year is not the same as to-year in the number range interval ( ISSR_TP 682 )
Reporting data for asset number &1 (SR product category &) not changed ( ISSR_TP 683 )
No changes in reporting data compared to existing data record ( ISSR_TP 686 )
Selected field control for field & not permitted ( ISSR_TP 693 )
Error in fiscal year-dependent external identification number assignment ( ISSR_TP 695 )
Error while determining position in function module & ( ISSR_TP 696 )
No data transfer at interface &2 &3 &1 ( ISSR_TP 697 )
Error while generating new data record & & ( ISSR_TP 698 )
Asset with VVKEY &1 (area &2): PRFL number &3 cannot be converted ( ISSR_TP 700 )
Asset with DARWIN key &1 (area &2) contains no PRFL number ( ISSR_TP 702 )
Incorrect Customizing in table 4; processing terminated ( ISSR_TP 703 )
No identification number assignment in company code & (SR variant &) ( ISSR_TP 704 )
Asset & (area &): stock indicator not set ( ISSR_TP 705 )
Identifier for field & (asset category &) could not be selected ( ISSR_TP 706 )
Asset & from area & is marked for update ( ISSR_TP 707 )
Update error during migration of reporting data records ( ISSR_TP 708 )
Data record for number range subobject & cannot be posted ( ISSR_TP 710 )
Deletion/writing of data records in table & / & canceled ( ISSR_TP 711 )
Data record with same key already exists in table & ( ISSR_TP 713 )
Data object & cannot be assigned to field symbol & ( ISSR_TP 717 )
Error in function module &; return code & was returned ( ISSR_TP 719 )
Data object & could not be assigned to field symbol & ( ISSR_TP 720 )
SR variant &1: closing date &2 is not permitted ( ISSR_TP 722 )
No record exists in table &3 for company code &1, SR variant &2 ( ISSR_TP 723 )
Specified assignment of SR prod. cat. to PRFL subsection is not possible ( ISSR_TP 724 )
Selected validity date & is within period-end closing ( ISSR_TP 725 )
Selected period-end closing is later than system date ( ISSR_TP 726 )
You are not authorized to call transaction &1 in company code &2 ( ISSR_TP 728 )
Error during authorization check ( ISSR_TP 729 )
You are not authorized to call transaction & ( ISSR_TP 730 )
No authorization for calling transaction &1 for SR variant &2 ( ISSR_TP 731 )
You are not authorized to transfer post reporting data ( ISSR_TP 732 )
Enter data for PRFL subsection in the correct sequence ( ISSR_TP 733 )
Error while deleting data records from internal table & ( ISSR_TP 734 )
Error during COMMIT WORK; posting terminated ( ISSR_TP 735 )
You are not authorized to call transaction &1 for contract type &2 ( ISSR_TP 736 )
No entry exists in table &2 for ABAP Dictionary object &1 ( ISSR_TP 749 )
Field &1 does not exist in table &2 ( ISSR_TP 755 )
Field name & in dynamic SELECT is longer than 66 characters ( ISSR_TP 756 )
Dynamic condition table for SELECT could not be created ( ISSR_TP 757 )
Structure & is not a database table/database view ( ISSR_TP 758 )
Document display transfer posting SR: No data record exists for index & ( ISSR_TP 760 )
Incorrect Customizing entry for ledger field name in table & ( ISSR_TP 761 )
Number of data records in table & must not be an odd number (&) ( ISSR_TP 763 )
Data record cannot be selected from internal table & ( ISSR_TP 767 )
Data record could not be selected from internal table &1 ( ISSR_TP 768 )
End of interval & entered is before start of interval & ( ISSR_TP 772 )
Data for identifier &1 cannot be entered in maintenance view &2 ( ISSR_TP 773 )
No external ID in administration table ISSR_EXTID_ADMIN ( ISSR_TP 779 )
Error in function module &; return code & was returned ( ISSR_TP 780 )
Data object & cannot be assigned to field symbol & ( ISSR_TP 783 )
Data object & cannot be assigned to field symbol & ( ISSR_TP 784 )
Different clients or SR variants are required ( ISSR_TP 788 )
Data records for SR variant & cannot be deleted ( ISSR_TP 791 )
Data object & cannot be assigned to field symbol & ( ISSR_TP 792 )
Data object & cannot be assigned to field symbol & ( ISSR_TP 793 )
Identifier change for fiscal year & only possible at period end (&) ( ISSR_TP 801 )
BE &1 (area &2): Positions exist in multiple asset depreciation areas ( ISSR_TP 802 )
Restriction during identifier change business entity & (area &) ( ISSR_TP 803 )
No data record for key combination of asset & in table & ( ISSR_TP 804 )
No data record for key combination of asset &1 (&4) in table &2 ( ISSR_TP 805 )
Detailed document display not possible for selected data record ( ISSR_TP 806 )
No data record for key combination of asset &1 (&4) in table &2 ( ISSR_TP 807 )
Asset with VVKEY &1 cannot be migrated to table &3 ( ISSR_TP 814 )
No data can be selected from table & ( ISSR_TP 817 )
VVKEY without asset category is not a unique selection criterion ( ISSR_TP 818 )
PRFL number for asset with VVKEY & (&) cannot be converted ( ISSR_TP 819 )
Asset with VVKEY & (&): Identifiers & cannot be converted ( ISSR_TP 820 )
No positions found for selection criteria ( ISSR_TP 821 )
Identifier change for asset & (area &) is not possible ( ISSR_TP 822 )
Master data records for asset with VVKEY & (area &) not migrated ( ISSR_TP 823 )
Master data records for asset with VVKEY & not migrated ( ISSR_TP 824 )
New SR variant & can terminate running programs ( ISSR_TP 825 )
Validity date does not match current date; change not possible ( ISSR_TP 826 )
Data record is currently locked by user & ( ISSR_TP 827 )
Position for selected contract & has changed ( ISSR_TP 829 )
Current determined position for asset & is (partially) negative ( ISSR_TP 830 )
Asset with VVKEY & (area &): Subsection for PRFL & cannot be converted ( ISSR_TP 831 )
Customizing settings missing: ALV Grid objects not defined ( ISSR_TP 832 )
Customizing settings missing; see long text ( ISSR_TP 833 )
System cannot determine positions for selection criteria ( ISSR_TP 834 )
Settings for selection screens not maintained ( ISSR_TP 835 )
Settings for tab pages not maintained ( ISSR_TP 836 )
Settings for ALV Grid layout not maintained ( ISSR_TP 837 )
Settings for ALV tree not maintained ( ISSR_TP 838 )
Customizing settings missing; function cannot be executed ( ISSR_TP 839 )
Settings at field level for ALV Grid not maintained ( ISSR_TP 840 )
Asset & already changed for validity date & by user & ( ISSR_TP 841 )
Asset & already changed for validity date & by user & ( ISSR_TP 842 )
SR product type cannot be derived from feeder system product type & ( ISSR_TP 844 )
Invalid Annex 10 identifier combination for cap. investment & in area &2 ( ISSR_TP 853 )
Enter valid identifiers for Mix annex ( ISSR_TP 854 )
Data record contains invalid combination of identifiers for Mix annex ( ISSR_TP 855 )
Contract &: Product cat., asset type, ind. for Mix annex are incompatible ( ISSR_TP 856 )
From now, SR variant & will be validated with respect to Mix annex ( ISSR_TP 857 )
SR variant & will no longer be validated with respect to Mix annex ( ISSR_TP 858 )
Invalid combination ind. R30/2002 annex 10 for cap. invest. & in area & ( ISSR_TP 859 )
Maintenance of this data only permitted for fund ( ISSR_TP 860 )
Only one default SR variant per company code is possible ( ISSR_TP 861 )
Processing of additional data is permitted here only for securities ( ISSR_TP 862 )
Indicator for fund look through option cannot be maintained ( ISSR_TP 863 )
System cannot determine data records for the selection criteria ( ISSR_TP 864 )
You are not authorized to delete all migrated master data records ( ISSR_TP 865 )
Missing authorization: Migration for all asset categories not possible ( ISSR_TP 866 )
No entry exists in table &1 for company code &2 and SR variant &3 ( ISSR_TP 867 )
No data records found for selection criteria chosen ( ISSR_TP 879 )
Copying and modifying data in client 000 is not permitted ( ISSR_TP 880 )
Data object & cannot be assigned to field symbol & ( ISSR_TP 881 )
Transaction &: No authorization for test run with target variant & ( ISSR_TP 882 )
Transaction &: You are not authorized to change list Customizing ( ISSR_TP 883 )
Transaction &: You are not authorized to insert Customizing data ( ISSR_TP 884 )
You have not specified a client; processing terminated ( ISSR_TP 886 )
Comparison of list Customizing not possible in background processing ( ISSR_TP 887 )
Program already being used ( ISSR_TP 891 )
SR variant &1 does not exist in client &2 ( ISSR_TP 892 )
Background processing; standard Customizing cannot be compared ( ISSR_TP 893 )
Table & has too many key fields ( ISSR_TP 894 )
Your selection of database tables to be processed is not permitted ( ISSR_TP 895 )
Validity date must be on or after conversion key date &2 ( ISSR_TP 896 )
SR variant &1 does not exist in client &2 ( ISSR_TP 898 )
Material selection: No further batch selection is assumed. ( IST0 003 )
Batch selection: No further material selection is assumed. ( IST0 007 )
File &1 was created &2. Path: &3 ( IST30 002 )
Check file history for file number &1 ( IST30 003 )
Customer exit &1 in &2 is faulty. Check the customer exit. ( IST30 020 )
Customer exit &1 in &2 is not active ( IST30 021 )
Data transfer at interface successful ( IST30 022 )
No resulting quantity from customer exit &1 in &2 for VKONT &3 ( IST30 024 )
Contract account &1 was not processed! ( IST30 030 )
Beware! Test run! ( IST30 032 )
Error accessing IST_TDATA table with &1 &2 &3 (CntAccount &4) ( IST30 035 )
No reference to service in table IST_TDATA ( IST30 036 )
Incorrect Customizing in View IST000C ( IST30 041 )
Work item in &1 could not be started ( IST30 102 )
No additional account assignment data (e.g. cost center) found ( IST30 200 )
The general selections are either insufficient or performance too slow ( IST30 302 )
Database error during insertion in &1 ( IST30 500 )
Database error during deletion in &1 ( IST30 502 )
Database error during modification in &1 ( IST30 503 )
Maintenance order &1 not found ( ISTNLMROLE 001 )
Update was terminated ( ISTNLMROLE 002 )
Unable to request material ( ISTNLMROLE 003 )
No orders specified ( ISTNLMROLE 016 )
No new order found that violates the SLA ( ISTNLMROLE 020 )
Status for unconfirmed orders for status profile &1 not specified ( ISTNLMROLE 040 )
No text message, e-mail recipient or manager specified for the alert ( ISTNLMROLE 042 )
Function requires the BAdI IST_NLM_TEAM to be implemented ( ISTNLMROLE 045 )
Specify a type ID, application is not specific enough ( ISTNLMROLE 108 )
No action possible for this selection ( ISTNLMROLE 109 )
Transfer parameter for &1 is incorrect or duplicated: &2 ( ISTNLMROLE 200 )
Unable to determine the business area ( ISTNLMROLE 208 )
The technician cannot be assigned automatically ( ISTNLMROLE 236 )
Activity (ID= &1) cannot be executed ( ISTNLMROLE 239 )
End date is later than start date (Parameter EX_STARTDATE, EX_ENDDATE) ( ISTNLMROLE 250 )
Color value &1 is not supported ( ISTNLMROLE 251 )
Interval to be represented is too large for Gantt display ( ISTNLMROLE 264 )
No agreements or invalid agreements were made for system &1 ( IST_EBS 100 )
Application &1 is not permitted for document transfer ( IST_EBS 109 )
No contract account could be found for the telephone number &1 ( IST_EBS 119 )
The taxes for doc. &1 are incompatible with the internally calc. taxes ( IST_EBS 120 )
The taxes for the item are incompatible with the internally calc. taxes ( IST_EBS 121 )
Condition type &1 does not exist or is not intended for taxes ( IST_EBS 122 )
The external doc. no. &1 is too long to be used as an internal doc. no. ( IST_EBS 123 )
The &1 field contains invalid characters ( IST_EBS 127 )
The reference object ID &1 is not defined in the system ( IST_EBS 128 )
Reversal is not possible using the REVERSE functionality from RM-CA ( IST_EBS 130 )
Only billing type reversal &1 is from category IS-T external billing ( IST_EBS 131 )
An error occured while posting at least one of the documents in IDoc &1 ( IST_EBS 141 )
Several documents exist for the triple AWTYP = &1, AWSYS = &2, AWKEY = &3 ( IST_EBS 150 )
Line &1 of IDoc &2 has an unexpected segment name ( IST_EBS 151 )
The data string in line &1 of IDoc &2 could not be converted ( IST_EBS 152 )
Parallelization-object and/or -variant are not maintained (-> long text) ( IST_EBS 153 )
No document exists for the triple AWTYP = &1, AWSYS = &2, AWKEY = &3 ( IST_EBS 154 )
Parallelization variant could not be updated ( IST_EBS 156 )
No IDocs were selected in the interval between &1 and &2 ( IST_EBS 157 )
There were problems processing at least one line in the IDoc &1 ( IST_EBS 158 )
IDoc &1 does not contain any data ( IST_EBS 159 )
Interval from &1 to &2: &4 of &3 IDocs were successfully processed ( IST_EBS 160 )
The application could not be determined (problem in FKK_GET_APPLICATION) ( IST_EBS 161 )
The trunk &1 already has the maximum no. of reconciliation keys (999) ( IST_EBS 162 )
Error while processing IDoc &1 ( IST_EBS 163 )
Function module IST_EBS_MRD_DET_FIKEY was called up in the wrong context ( IST_EBS 164 )
Close reconciliation key &1 manually! Call up test reports ( IST_EBS 166 )
Function module &1 is not intended for the mass activity &2 ( IST_EBS 167 )
Processing error in IDoc interval between &1 and &2. Message type &3 ( IST_EBS 168 )
Problem occured in acct determination (Func. mod. FKK_ACCOUNT_DETERMINE) ( IST_EBS 170 )
Reconciliation key not determined (problem in event T402) ( IST_EBS 172 )
Problem in function module FKK_CREATE_DOC_MASS_STOP. Reconcil. key &1 ( IST_EBS 176 )
The action category could not be determined ( IST_EBS 186 )
The screen is being used in the wrong context ( IST_EBS 187 )
Activity &2 is defined for user key &1, not activity &3 ( IST_EBS 188 )
Too few IDocs for processing. Use a different variant ( IST_EBS 190 )
The range table containing the status is incorrectly filled ( IST_EBS 191 )
Inconsistency in radio button grp on screen 4550 in IST_EBS_MASS_ACT ( IST_EBS 192 )
Mass activity type &1 does not exist ( IST_EBS 193 )
Mass activity &1 and job type &2 do not suit ( IST_EBS 194 )
A mass activity is already stored for user key &1 ( IST_EBS 195 )
One of the input parameters is not filled ( IST_EBS 196 )
Mass run activity &1 and IDs &2 and &3 could not be created ( IST_EBS 198 )
No jobs were created ( IST_EBS 199 )
No characteristic derivation defined for CO-PA operating concern &1 ( IST_EBS 210 )
CO-PA characteristic is initial for characteristic val. &1 in op. con. &2 ( IST_EBS 214 )
No allocation exists for ext. characteristic &1 in operating concern &2 ( IST_EBS 215 )
No unique entry in IST_EBS_POI_SYST using combination &1/&2/&3/&4 ( IST_EBS 300 )
Customizing for &1/&2/&3/&4 in IST_EBS_POI_SYST is imcomplete ( IST_EBS 301 )
&1 is not a date variable ( IST_EBS 302 )
Incorrect IDoc: Segment &2 not intended for type &1 ( IST_EBS 304 )
Inconsistency in conversion of IDoc &1 ( IST_EBS 305 )
There is no valid customer function module for event T410 ( IST_EBS 306 )
An error occured while converting the data fields ( IST_EBS 307 )
Field &1 exceeds the maximum length of &2 ( IST_EBS 308 )
Account statement only possible if selection entity = VKONT ( IST_EBS 309 )
Incorrect Customizing: &1 - &2 combination not allowed ( IST_EBS 310 )
Problem in IST_TELNUM_FIND function module ( IST_EBS 311 )
No selection conditions. All open items were selected ( IST_EBS 312 )
At least one incorrect IDoc (no. &1) was created ( IST_EBS 315 )
Selection conditions exist for two different entities ( IST_EBS 316 )
At least one of the contract accounts does not exist ( IST_EBS 318 )
No IDocs were created ( IST_EBS 320 )
Problem checking the distribution model for message type &1 ( IST_EBS 321 )
The distribution model for message type &1 is not maintained ( IST_EBS 322 )
The TFKTVOT text table does not contain an entry for the &1/&2/&3/&4 key ( IST_EBS 323 )
Incorrect settings in IST_EBS_POI_SYST for &1/&2/&3/&4 ( IST_EBS 324 )
The T_VKONT selection table is incorrectly filled ( IST_EBS 325 )
Account statements can only be requested using CACCTs or BPARTs ( IST_EBS 340 )
There are already 100 IDs with &2 as body for the date &1 ( IST_EBS 342 )
FKJO_SCHEDULE exceeded max time: job no. &1, job name &2 ( IST_EBS 402 )
FKJO_SCHEDULE was cancelled: job no. &1, job name &2 ( IST_EBS 403 )
Error reading the job log for job no. &1, job name &2 ( IST_EBS 405 )
A problem occured while reading the job status of job no. &1, job name &2 ( IST_EBS 406 )
The application is &1, not &2 ( IST_EBS 500 )
This function is only planned for application &1 or &2 ( IST_EBS 501 )
No contract template for master data template &1 CRM product &2 ( ISUPFC 005 )
Contract template &1 with proration for device &2 ( ISUPFC 006 )
Contract template &1 with inadmissible meter reading for device &2 ( ISUPFC 007 )
Contract template &1 with inadmissible profile ( ISUPFC 008 )
Contract template &1 with inadmissible profile values ( ISUPFC 009 )
Rate category &1 is not suitable for the simulation ( ISUPFC 012 )
Master data template &1 does not have unique nodes with category &2 ( ISUPFC 013 )
Currency is not unique in simulation document for contract template &1 ( ISUPFC 014 )
No register found for register code &1 ( ISUPFC 016 )
Annual consumptions number does not match number of registers ( ISUPFC 017 )
Unit of measurement &1 for annual consumption not suitable for device &3 ( ISUPFC 018 )
No price simulation group found for master template &1 ( ISUPFC 028 )
Price simulation group &1 does not exist ( ISUPFC 029 )
Cannot change consumption to &1 for division &3, register type &4 ( ISUPRP 004 )
Cannot change consumption to &1 for division &3, register type &4 ( ISUPRP 005 )
You can only enter a default consumption segment ( ISUPRP 006 )
Entered budget billing plan cycle &1 is not valid ( ISUPRP 012 )
Scen.Cat.&1 Ext.Scenario &2: No simulation scenario found for segment &3 ( ISUPRP 014 )
Customer Consumption Segment &1: Simulation scenario not defined ( ISUPRP 015 )
Contract &1 (Segment &2 ):Installation &3 with RegCode <> &4 ( ISUPRP 023 )
Contract &1 (Product &2 ):Installation &3 deviates from &4 RegCodes ( ISUPRP 024 )
Contract &1 (Segment &2 ):Installation &3 deviates from &4 RegCodes ( ISUPRP 025 )
Contract &1 (Product &2 ):Installation &3 has more than 1 register ( ISUPRP 026 )
Contract &1 (Segment &2 ):Installation &3 has more than 1 register ( ISUPRP 027 )
Contract &1 (Product &2 ):Installation &3 has more than 2 registers ( ISUPRP 028 )
Contract &1 (Segment &2 ):Installation &3 has more than 2 registers ( ISUPRP 029 )
Contract &1 (Product &2 ):Installation &3 => Change of reg. code ( ISUPRP 030 )
Contract &1 (Segment &2 ):Installation &3 => Change of Reg. code ( ISUPRP 031 )
Cntrct/Inst. &1 EquiNo/Reg. &2: RegCode &3 not defined in Segm/Div/MT &4 ( ISUPRP 032 )
Current contract &1: Installation &2 has no rate category at key date &3 ( ISUPRP 033 )
Contract &1 (Product &2 ): Installation &3 has no rate category at &4 ( ISUPRP 034 )
Contract &1 (Segment &2 ): Installation &3 has no rate category at &4 ( ISUPRP 035 )
The budget billing period is identical to the simulation period: &1 days ( ISUPRP 036 )
Missing values for off-peak consumption on/off-peak. Enter missing value ( ISUPRP 037 )
Billing document &1 ( Start &2, End &3) has too many days ( &4 ) ( ISUPRP 038 )
Billing document &1 (Start &2, End &3):Addition leads to overflow (&4) ( ISUPRP 039 )
Billing document &1 (Start &2,End &3) has too many days ( &4 )( DEMAND) ( ISUPRP 040 )
Billing doc. &1 (Start &2, End &3): Addition leads to overflow (&4)(DEM) ( ISUPRP 041 )
Contract &1 is not a sample contract. ( ISUPRP 045 )
Missing values for on-peak consumption/single. Enter missing values ( ISUPRP 050 )
Contract's Inst. &1 Div. &2 and Pro.d &3 Div. &4 are not the same ( ISUPRP 056 )
More than one rate category defined in installation &1 for contract &2. ( ISUPRP 062 )
Contract &1 rate category &2 and item division &3 are not the same ( ISUPRP 064 )
No installation is allocated to contract &1 ( ISUPRP 066 )
Unit of measure &1 is not valid for division &2 ( ISUPRP 068 )
Risk class &1 is not admissible. Please use a valid risk class. ( ISUPRP 074 )
Function &1: Master data template error for product &2 ( ISUPRP 084 )
Operand &1: Consider operand rounding rule &2 (Starting point) ( ISUPRP 093 )
Consumption &1 for division &3 register type &4 not in range of tolerance ( ISUPRP 096 )
Consumption &1 for division &3 register type &4 not in range of tolerance ( ISUPRP 097 )
No sample contract for simulation available ( ISUPRP 098 )
No sample contract for simulation available for product &1 ( ISUPRP 099 )
Period consumption cannot be assigned to register of sample contract ( ISUPRP 100 )
Table &1: Also enter the key in CRM - Key: &2 ( ISU_CRM_CUSTCHK 001 )
Table &1: Also enter key &2 in view &4 ( ISU_CRM_CUSTCHK 002 )
Select a view ( ISU_CRM_CUSTCHK 011 )
&1 will be ignored ( ISU_CRM_CUSTCHK 013 )
No text message maintained in the text editor ( ISU_GS_IN_SMS 003 )
& Service Subtype does not exist for the service type &. ( ISU_GS_IN_SMS 016 )
Text message applicable for all sub-types of service type & ( ISU_GS_IN_SMS 017 )
&1 of serial number &2 cannot take place before &3 ( ISU_MSG_GS_IND 020 )
Serial numbers are being created for seal code & ( ISU_MSG_GS_IND 045 )
You are not authorized to change the status of seal to & ( ISU_MSG_GS_IND 056 )
Sales document items could not be assigned -> see long text. ( ISU_S4H_C4C_UTIL_MSG 001 )
Multiple source systems for opportunities referenced in document &1 ( ISU_S4H_C4C_UTIL_MSG 002 )
Entry is not relevant for replication, record ignored. See Long Text ( ISU_S4H_C4C_UTIL_MSG 359 )
&1 of serial number &2 cannot take place before &3 ( ISU_SEAL_IN 020 )
Serial numbers are being created for seal code & ( ISU_SEAL_IN 045 )
You are not authorized to change the status of seal to & ( ISU_SEAL_IN 056 )
You are not authorized to perform any operations with entity &1 ( ISU_UMC_ODATA 006 )
Your &1 invoice of &3 &2 is overdue ( ISU_UMC_ODATA 025 )
You have a payment of &2 &1 due on &3 ( ISU_UMC_ODATA 026 )
The reversal reason &1 is not valid for billing documents ( ISU_WUI_DOC 011 )
This non-ERP adapter &1 can not be changed to be a maintain adpter ( ISX_MD_CUST 005 )
A non-ERP maintain adapter already exists in this scenario ( ISX_MD_CUST 006 )
Language & not supported ( IT 001 )
Number of lines of text < &: use the lines available first ( IT 002 )
Text in the primary language of the object must be maintained ( IT 003 )
Text in the primary language of the object cannot be deleted ( IT 004 )
Text already exists in language & ( IT 005 )
Maintain a text in language & ( IT 006 )
The associated long text will also be deleted ( IT 008 )
Long text already entered: short text must be maintained ( IT 010 )
Multiling. text maint. not possible for equip. of cat. '&' ( IT 012 )
No. of texts < &: no further texts can be displayed ( IT 013 )
Equipment description does not exist ( IT 014 )
Function & / Table &: record & & not found ( IT 050 )
Function & / Table &: record & & already exists ( IT 051 )
Table & / activity type &, key: &, RC=& ( IT 052 )
Relationship "&1" cannot be valuated for objects "&2" to "&3" ( IT1988_MESSAGES 001 )
Object "&1" does not have "&2" relationship to object "&3" ( IT1988_MESSAGES 005 )
Values entered are not permitted ( IT1988_MESSAGES 014 )
Warning: Weighting factor already exists for this period ( IT1988_MESSAGES 016 )
The Hierarchy-Collection function is not active ( ITAGCY 005 )
Check broker &1 and broker contract &2 ( ITAGCY 101 )
Status changed with document number &1 (broker &2, broker contract &3) ( ITAGCY 102 )
Entry broker &1, broker contract &2, document number &3 deleted ( ITAGCY 103 )
No additional data available for document &1 (category &3) ( ITAGCY 401 )
Reference document number &1 will be checked ( ITAGCY 603 )
Commission document &1 will be checked ( ITAGCY 604 )
Commission document &1 will be cleared ( ITAGCY 606 )
Subcommission document &1 will be cleared ( ITAGCY 607 )
Broker report items reversed for commission document &1 ( ITAGCY 608 )
Trigger written for reversal for subcommission document &1 ( ITAGCY 609 )
Check broker &1 and broker contract &2 ( ITAGCY 611 )
Subcommission document &1 will be checked ( ITAGCY 612 )
Commission document &1 will be checked ( ITAGCY 613 )
Subcommission document &1 will be checked ( ITAGCY 614 )
Broker &1, contract &2 is not assigned to an organizational unit ( ITAGCY 620 )
Prerequisites for encryption not met ( ITAGCY 824 )
Accumulated Value Type cannot be 'Currency'; see long text ( ITC_ADMIN 004 )
Special Setting Type not permitted for Accumulated Value Type 'Currency' ( ITC_ADMIN 005 )
Special Setting Type not permitted for Calculation Type 'Entered' ( ITC_ADMIN 006 )
Page not accessible;see long text. ( ITC_ADMIN 013 )
Check selected fiscal year ( ITFM_REP 002 )
No POR ID is assigned to payment reference type &1 ( ITL 071 )
Payment reference type &1 is not defined in Customizing ( ITL 072 )
Payment reference number can not be based on entry &1 ( ITL 073 )
Customer ID number &1 is not valid ( ITL 074 )
POR ID &1 is not defined in Customizing ( ITL 075 )
POR procedure &1 does not exist ( ITL 076 )
Payment reference number &1 is not valid ( ITL 077 )
Amount &2 &1 is too large or small for POR procedure &3 ( ITL 078 )
The reference number for the Nota Fiscal has more than one dash ( ITL_BR 001 )
Nota Fiscal Type &1 is unknown ( ITL_BR 004 )
Tax code change not authorized ( ITMF1 000 )
Impossible to change tax code; enter a reason for manual change ( ITMF1 001 )
Impossible to change tax data; enter a reason for manual change ( ITMF1 008 )
Internal error in program &1, access to table &2 with key &3' ' &4 ( ITOB 001 )
Internal error in program &1, access to table &2 with index &3 ( ITOB 002 )
Internal error in buffer management for technical objects ( ITOB 003 )
Unexpected error in program &1, access to table &2 with key &3 ( ITOB 004 )
Internal error in calling lock management ( ITOB 005 )
Internal error during object check: Missing key, module = &1 ( ITOB 010 )
The last number from the interval & was assigned ( ITOB 201 )
&1: &2 for &3 in table: &4 ( ITOB 202 )
ITOB: &1 &2 in program &3 ( ITOB 203 )
No valid number range was found ( ITOB 204 )
Error during internal number assignment - Exception: &1 ( ITOB 205 )
Equipment category was not specified ( ITOB 301 )
The equipment category & does not exist in the system ( ITOB 302 )
No external number range is defined for equipment category & ( ITOB 303 )
Field contains invalid characters ( ITOB 304 )
Equipment category & does not allow alphanumerical equipment numbers ( ITOB 305 )
Equipment number & not in external number interval ( ITOB 308 )
No internal number range is defined for the equipment category & ( ITOB 309 )
Wrong data in customer exit &1 &2, error message on pressing ENTER ( ITOB 351 )
Ignore wrong data in customer exit &1 &2, error message on pressing ENTER ( ITOB 352 )
Termination because of wrong data in customer exit &1 &2, dump aft. ENTER ( ITOB 353 )
Equipment &1 is not a vehicle ( ITOBFLTCON 001 )
Updating of material documents not possible without valid gas stations ( ITOBFLTCON 010 )
Rule for issuing material documents was not found ( ITOBFLTCON 011 )
Auxiliary materials and consumables cannot be determined ( ITOBFLTCON 020 )
Material for auxiliary materials and consumables cannot be determined ( ITOBFLTCON 021 )
Rule for consumption determination was not found ( ITOBFLTCON 030 )
You have not recorded a primary consumption ( ITOBFLTCON 032 )
Area allowed for the primary counter is &1 &3 to &2 &3 ( ITOBFLTCON 040 )
The primary counter reading must be greater than &1 &2 ( ITOBFLTCON 041 )
The primary counter reading must be less than &1 &2 ( ITOBFLTCON 042 )
Documents for date &1 time &1 reversed successfully ( ITOBFLTCON 060 )
Specify at least one selection condition ( ITOB_BAPI 000 )
Confign ctrl not allowed for current system settings, check Customizing ( ITOB_BAPI 002 )
Configuration control not allowed for equipment type &, check Customizing ( ITOB_BAPI 003 )
Update of field PPEGUID only for configurable material ( ITOB_BAPI 004 )
Configurable material is linked to more than one node in iPPE ( ITOB_BAPI 005 )
Value in PPEGUID does not match the inferred value ( ITOB_BAPI 006 )
Error when reading values in PPEGUID for configurable material ( ITOB_BAPI 007 )
TECHS update not possible ( ITOB_BAPI 011 )
Engine type & not intended for use ( ITOB_FLEET 101 )
Fluid type & not intended for use ( ITOB_FLEET 102 )
Usage indicator & is not planned ( ITOB_FLEET 103 )
Costing procedure & not intended for use ( ITOB_FLEET 104 )
No inverse unit has been maintained for unit & ( ITOB_FLEET 105 )
The system cannot calculate the consumption values ( ITOB_FLEET 106 )
Invalid key & for controlling the material consumption ( ITOB_FLEET 111 )
Invalid key & for controlling the consumption tolerance ( ITOB_FLEET 112 )
Vehicle-specific F4 help cannot be processed ( ITOB_FLEET 113 )
No adequate measurement documents for determining period average ( ITOB_FLEET 203 )
Equipment category &1 is not intended for use in equipment category &2 ( ITOB_FLEET 301 )
Fleet object type &2 is not intended for use in equipment category &1 ( ITOB_FLEET 302 )
Fleet object type & has not been set up ( ITOB_FLEET 303 )
No suitable primary counter exists for the calculation method & ( ITOB_FLEET 304 )
No consumption-relevant fuel counter is suitable for calculation method & ( ITOB_FLEET 305 )
No unique primary counter exists for the calculation method & ( ITOB_FLEET 306 )
No consumption-relevant fuel counter for calculation method & ( ITOB_FLEET 307 )
Display unit &1, primary and fuel counters do not match ( ITOB_FLEET 308 )
No primary counter has been maintained for calculation method & ( ITOB_FLEET 309 )
No consumption-relevant fuel counter maintained for calculation method & ( ITOB_FLEET 310 )
No display unit has been maintained for calculation method & ( ITOB_FLEET 311 )
Views for fleet object type &1 have been added ( ITOB_FLEET 312 )
Pieces of equipment already exist with object type &1 ( ITOB_FLEET 313 )
Resetting the fleet object type for the current vehicle is not allowed ( ITOB_FLEET 314 )
Reseting the fleet object type deletes fleet object-specific data ( ITOB_FLEET 315 )
Data error during conversion as per display unit -> Data reset ( ITOB_FLEET 320 )
Fleet object data not yet adjusted in relation to SI units ( ITOB_FLEET 321 )
No (unique) unit of measure found for ISO code &1 -> dump ( ITOB_FLEET 322 )
&1: Value &2 rounded to &3 as only two decimal places possible ( ITOB_FLEET 323 )
Unit & selected has not maintained as the SI unit in Customizing ( ITOB_FLEET 402 )
Unit & has no dimension ( ITOB_FLEET 403 )
Measurement position & not allowed in Fleet Management ( ITOB_FLEET 404 )
Measurement pos. & has not been set up as a fuel counter in Customizing ( ITOB_FLEET 405 )
Measurement position & not set up as a primary counter in Customizing ( ITOB_FLEET 406 )
The dimension of unit of measurement &1 is not suitable for unit group &2 ( ITOB_FLEET 407 )
No valid dimension was found for unit of measurement & ( ITOB_FLEET 408 )
The long period is shorter than the short period ( ITOB_FLEET 414 )
Buffer table for synchronization is incomplete ( ITOB_IBASE 002 )
Data inconsistencies arose while reading the FLoc structure ( ITOB_IBASE 004 )
IBases already exist for IBase type & ( ITOB_IBASE 006 )
File name &4 is too long for path &3 in theme &1 &2 ( ITSPHELP 002 )
Error when getting cache for &1; read the long text of this message ( ITSPHELP 011 )
Generation style &1 is not defined ( ITS_GENERATE_TEMPL 001 )
Error in generation style &1 (see long text) ( ITS_GENERATE_TEMPL 002 )
Error in generation style &1 (see long text) ( ITS_GENERATE_TEMPL 003 )
ABAP error in generation of dynpro elements (see long text) ( ITS_GENERATE_TEMPL 004 )
Template Generator: Template missing or not published: &1 &2 &3 ( ITS_GENERATE_TEMPL 101 )
Template Generator: Error in template &1 &2 &3 ( ITS_GENERATE_TEMPL 102 )
Review required for customer control &1, dynpro: &2 ( ITS_GENERATE_TEMPL 107 )
Caution: Restricted support for custom controls ( ITS_GENERATE_TEMPL 108 )
Infinite replacement of placeholders ( ITS_GENERATE_TEMPL 109 )
The dynpro element &1 &2 does not exist in the editor template ( ITS_GENERATE_TEMPL 201 )
Service is deactivated ( ITS_P 002 )
Service is not installed ( ITS_P 010 )
ITS option "~SingleTransaction" not supported ( ITS_P 102 )
Maintain SET/GET parameters for external tool (refer to long text) ( ITS_VERSIONS 003 )
Documents with different CUP/CIG cannot be processed together. ( IT_CUP_CIG 006 )
Table & is not locked for a conversion ( IU 003 )
Table & is already used by a process ( IU 004 )
Table & is not ready for conversion ( IU 008 )
Table &: Runtime objects cannot be found ( IU 009 )
Table & is already locked for a VTRUM conversion ( IU 017 )
Error in the state definition of the conversion ( IU 020 )
Necessary to reprocess using Transaction ICNV ( IU 022 )
Table &: Update operator failed ( IU 023 )
Table &: Insert operator failed ( IU 024 )
Table &: State transition already running ( IU 025 )
Table &: Conversion processes still working ( IU 026 )
Table &: Starting data transfer ( IU 028 )
Table &: Ending data transfer ( IU 029 )
Program &: Signal '&' received ( IU 030 )
Table & has incorrect type for incremental conversion ( IU 032 )
Table & already has a field with name & ( IU 033 )
Table &: Ending incremental conversion ( IU 034 )
Table &: Changes for key fields are not allowed ( IU 035 )
Table &: Error during data transfer ( IU 040 )
This program may only run in upgrade phase CNV_SUBMIT ( IU 042 )
Decisions are still open or not saved. ICNV cannot begin. ( IU 209 )
Some tables could not be set. Excluded from ICNV. ( IU 210 )
ICNV not yet released on DBMS & ( IU 424 )
<<<<Table(s) check shows inconsistencies ( IU 438 )
You cannot save because single decisions are still open ( IU 475 )
>>> ICNV already started for at least one table ( IU 497 )
Initialization for Informix can result in termination -> see long text ( IU 501 )
Field list of & enhanced by indicator field & ( IU 503 )
Not all entries were deleted ( IU 558 )
Data transfer started or optimized & ( IU 567 )
All processes stopped with delay & ( IU 568 )
Table &: Conversion already started ( IU 574 )
The switch must be made in the upgrade for the selected tables ( IU 577 )
Table for incremental conversion is entered for VTRUM conversion ( IU 580 )
Entries still exist in the inactive nametab ( IU 581 )
Tables are still entered for conversion ( IU 582 )
Marked tables were excluded from switch to new version of table ( IU 583 )
Less than & % was completed; do not start switch/upgrade ( IU 585 )
& % was completed. Switch/upgrade can be started. ( IU 586 )
Calculation of conversion progress triggered ( IU 588 )
Initialization of selected tables triggered or scheduled ( IU 589 )
Switch to new tables triggered or scheduled ( IU 590 )
Deletion of selected entries triggered ( IU 591 )
Table & already locked for conversion ( IU 595 )
Table &: incremental conversion not possible ( IU 597 )
Alias activation not possible in kernel release & ( IU 609 )
Follow-up actions necessary for table cluster EDIDOC ( IU 610 )
ICNV for table cluster not possible with kernel release & ( IU 612 )
Initialization not necessary for any table ( IU 621 )
No entries can be removed at the moment ( IU 622 )
Switch not possible for any table ( IU 623 )
Not possible to reset any table ( IU 624 )
Ad hoc ICNV for table cluster with kernel release & not possible ( IU 628 )
Restart initialization or data transfer if necessary ( IU 632 )
Operation failed (see log -TRAN_& in source/target system) ( IU 643 )
Only transparent and cluster tables can be converted incrementally ( IU 701 )
Data synchronization was started or optimized ( IU 734 )
Table &: ICNV state is incorrect and ICNV cannot be finished ( IU 761 )
Distribution run already already exists for run ID &1 / date &2 ( IUEEDPPLOTA 001 )
No log exists for run ID &1 / date &2 ( IUEEDPPLOTA 002 )
Select at least one selection criterion for aggregated posting ( IUEEDPPLOTA 003 )
Cannot determine &1 ( IUEEDPPLOTA 005 )
Application area not activated for utility companies ( IUEEDPPLOTA 006 )
Determine items for distribution ( IUEEDPPLOTA 008 )
Cannot determine length of field &1 ( IUEEDPPLOTA 015 )
Length of key prefix not permitted ( IUEEDPPLOTA 016 )
All lot keys between &1 and &2 already used ( IUEEDPPLOTA 017 )
Selection cannot occur without limiting criteria ( IUEEDPPLOTA 019 )
Cannot det. bank clearing acc. for co. code &1 / sender &2 / recipient &3 ( IUEEDPPLOTA 020 )
Payment doc. &1 does not belong to an aggr. contract acct or a distr. lot ( IUEEDPPLOTA 023 )
Cannot determine default values for distribution lot ( IUEEDPPLOTA 024 )
Cannot determine parameters for distribution run ( IUEEDPPLOTA 025 )
Bill sender &1 does not exist ( IUEEDPPLOTA 028 )
Document &1 is not a payment document ( IUEEDPPLOTA 031 )
Selection category &1 for distribution lot not defined ( IUEEDPPLOTA 032 )
&1 not as selection category defined ( IUEEDPPLOTA 034 )
&1 cannot be used as selection category for distribution from bill creat. ( IUEEDPPLOTA 035 )
Bill recipient &1 does not exist ( IUEEDPPLOTA 039 )
Specify a prefix for the lot key ( IUEEDPPLOTA 040 )
No valid bank clearing account specified in distribution lot &1 ( IUEEDPPLOTA 041 )
No valid service provider specified in distribution lot &2 ( IUEEDPPLOTA 042 )
Specify a valid further processing action ( IUEEDPPLOTA 043 )
The run is incorrect ( IUEEDPPLOTA 044 )
&1 changed: Run &2 continues with original values ( IUEEDPPLOTA 045 )
Agreement between sender &1 and recipient &2 could not be read ( IUEEDPPLOTA 047 )
&1 is not defined as contract account for aggregated bill posting for &2 ( IUEEDPPLOTA 048 )
Account &1 cannot be found in an agreement of &2 ( IUEEDPPLOTA 050 )
Account &1 cannot be found in an agreement of &2 ( IUEEDPPLOTA 051 )
Document &1 does not match bill sender &2 ( IUEEDPPLOTA 052 )
Document &1 does not match bill recipient &2 ( IUEEDPPLOTA 053 )
Document &1 does not match agreement between &2 and &3 ( IUEEDPPLOTA 054 )
Specify a document number for the payment document ( IUEEDPPLOTA 055 )
Distribution lot &1 could not be closed ( IUEEDPPLOTA 056 )
Error determining function module for &1 ( IUEEDPPLOTA 059 )
Individual bill items already in payment lots ( IUEEDPPLOTA 060 )
Individual bill items already cleared by payment lot ( IUEEDPPLOTA 061 )
Exception for time of enhancement &1 ( IUEEDPPLOTA 062 )
Exception in lot item &1 for time of enhancement &1 ( IUEEDPPLOTA 063 )
Cannot read agreement between sender &1 and recipient &2 ( IUEEDPPLOTA 064 )
Agrmnt betw. sender &1 and rec. &2 only allows distr. from pymt adv. note ( IUEEDPPLOTA 065 )
Cannot determine company code for recipient &2 ( IUEEDPPLOTA 066 )
Aggregated incoming payments for lot &1 not yet complete ( IUEEDPPLOTA 068 )
Internal error selecting individual documents ( IUEEDPPLOTA 069 )
Function module &1 does not exist ( IUEEDPPLOTA 070 )
function module &1 is not active ( IUEEDPPLOTA 071 )
Distribution lot &1 could not be posted ( IUEEDPPLOTA 072 )
Cannot copy item &1 to lot item for selection &2 ( IUEEDPPLOTA 073 )
Cannot determine interpretation algorithm for algorithm ID &1 ( IUEEDPPLOTA 074 )
Payment advice note items already in payment lots ( IUEEDPPLOTA 075 )
Internal error selecting payment advice items ( IUEEDPPLOTA 076 )
Distribution lot &1 is incorrect ( IUEEDPPLOTA 077 )
Cannot post distribution lot &1 without aggregated incoming payments ( IUEEDPPLOTA 078 )
Start &1 distribution lots requiring further processing ( IUEEDPPLOTA 079 )
Determine selection criteria for tracking receivables ( IUEEDPPLOTA 080 )
Item &1: Cannot determine all distribution parameters ( IUEEDPPLOTA 081 )
Internal error posting lot &1 ( IUEEDPPLOTA 082 )
Status of distribution lot &1 does not allow for deletion ( IUEEDPPLOTA 084 )
Exception calling function module &1 ( IUEEDPPLOTA 086 )
Internal error in program &1 ( IUEEDPPLOTA 087 )
Function module &1 has an incorrect interface ( IUEEDPPLOTA 088 )
Reconciliation key &1 couild not be deleted ( IUEEDPPLOTA 089 )
Payment document &1 cannot be allocated to a contract account ( IUEEDPPLOTA 093 )
Category of contract account &1 is not permitted for invoicing SPs ( IUEEDPPLOTA 094 )
Payment document &1 cannot be allocated to a CA for aggr. bill posting ( IUEEDPPLOTA 095 )
Specify a document number for the clearing document ( IUEEDPPLOTA 097 )
Document &1 is not a reset document ( IUEEDPPLOTA 098 )
Payment document &1 does not match contract account &2 ( IUEEDPPLOTA 099 )
Payment document &1 cannot be allocated to a contract account ( IUEEDPPLOTA 100 )
Payment document &1 cannot be allocated to a CA for aggr. bill posting ( IUEEDPPLOTA 101 )
Status of distribution lot &1 does not permit closing ( IUEEDPPLOTA 107 )
Status of distribution lot &1 does not permit posting ( IUEEDPPLOTA 108 )
Some services providers require a payment advice note for distribution ( IUEEDPPLOTA 110 )
Item &1: Parameter 'AutoAvis' is not active ( IUEEDPPLOTA 111 )
Status &2 for payment advice note &1 does not allow copying to dist. lot ( IUEEDPPLOTA 116 )
Status &2 of document &1 does not allow copying to distribution lot ( IUEEDPPLOTA 119 )
PAN &1: Document &2: Internal error: No transfer-relevant items exist ( IUEEDPPLOTA 122 )
Pymt Adv. Note &1: Document &2: Internal error calling transfer module ( IUEEDPPLOTA 123 )
No payment date is specified in payment advice note item &1 ( IUEEDPPLOTA 124 )
Cannot determine parameter f. distribution of aggr. pymts for co. code &1 ( IUEEDPPLOTA 125 )
Cross-currency OI selection: &1 - Cannot determine total amount ( IUEEDPPLOTA 126 )
Individual bill items already cleared ( IUEEDPPLOTA 129 )
Could not select document data from DFKKTHI ( IUEEDPPLOTA 130 )
Account &1 not saved as clearing account for payment lots in co. code &2 ( IUEEDPPLOTA 134 )
Distribution lots still require processing ( IUEEDPPLOTA 135 )
Calculate new amounts for individual items ( IUEEDPPLOTA 140 )
Individual bill items already distributed for determined percentage ( IUEEDPPLOTA 141 )
Cannot carry out distribution of &1 percent for individual items ( IUEEDPPLOTA 142 )
The combination of default algorithm &1 and field &2 is not permitted ( IUEEDPPLOTA 144 )
PAN interpretation: Invalid default algorithm for algorithm ID &1 ( IUEEDPPLOTA 147 )
Distribution lot check is not active ( IUEEDPPLOTA 148 )
Distribution lot check not active: Lots are not posted ( IUEEDPPLOTA 150 )
You cannot delete items with this status ( IUEEDPPLOTA 153 )
You cannot open distribution lots with this status ( IUEEDPPLOTA 155 )
Credit still exists on account &1 business partner &2 ( IUEEDPPLOTA 159 )
Entry from DFKKTHI already exists in lot &2 ( IUEEDPPLOTA 163 )
Could not successfully postprocess distribution lot &1 ( IUEEDPPLOTA 171 )
ALgorithm ID missing in service provider agreement ( IUEEDPPLOTA 192 )
No further payment amount exists: It is not possible to add other items ( IUEEDPPLOTA 199 )
Distribution lot, processing not possible using FP05 ( IUEEDPPLOTA 210 )
Distribution lot allocation: Clearing reset (clarification) not permitted ( IUEEDPPLOTA 214 )
Document &1 with origin &2 cannot be reversed ( IUEEDPPLOTA 215 )
Pyt adv. note line &1/&2, ext./int. doc. no. &3/&4: No aggreg. document ( IUEEDPPLOTA 223 )
Cannot reverse payment document &1 with origin distribution lot ( IUEEDPPLOTA 229 )
In event of lot reversal, document &1 is added to reversal distr. lot ( IUEEDPPLOTA 232 )
Short account required for transfer posting for posting area &1 acct &2 ( IUEEDPPLOTA 233 )
Distribution lot &1, item &2, short account &3 not permitted ( IUEEDPPLOTA 236 )
Cannot reverse doc &1: Distribution lot &2, item &3, short account &4 ( IUEEDPPLOTA 237 )
Payment document &1 is allocated to distribution lot &2 ( IUEEDPPLOTA 241 )
Document &1 with origin &2 cannot be reversed ( IUEEDPPLOTA 242 )
Payment document &1 was not posted using distribution lot ( IUEEDPPLOTA 243 )
Payment doc. &1 is allocated to a contract acct for aggregated posting ( IUEEDPPLOTA 245 )
Causes full adjustment of distribution lot reference 3 ( IUEEDPPLOTA 254 )
Clearing reset not possible for document &1 ( IUEEDPPLOTA 256 )
Reference to document &1 set to zero by payment advice note line &2 ( IUEEDPPLOTA 258 )
Document &1 queried with &2, but amount is no longer open ( IUEEDPPLOTA 269 )
Acct &1 not defined as bank clearing acct for dist. lot in comp. code &2 ( IUEEDPPLOTA 271 )
Adjustment of payment allocation for lot &1 not possible ( IUEEDPPLOTA 281 )
Unreversible clarification documents found for item &1 ( IUEEDPPLOTA 286 )
Reversal of Lot item &2: Reference to document &1 set to maximum value ( IUEEDPPLOTA 288 )
Advice note &1 generated for lines with errors ( IUEEDPPLOTA 290 )
No valid bank clearing account specified in distribution lot &1 ( IUEEDPPLOTA 291 )
No valid bank clearing account specified in payment lot &1 ( IUEEDPPLOTA 292 )
No data for open distribution amount for document &1 ( IUEEDPPLOTA 320 )
The selection type for &2 is missing in application area &1 ( IUEEDPPLOTA 502 )
No open items selected or clearing proposal created ( IUEEDPPLOTA 513 )
SerUsage for procedure MMSL of profile &1 has to be obligatory ( IUID 001 )
Serial number profile cannot be used with IUID handling ( IUID 002 )
Serialization level of explicitness is not allowed for IUID type 'UID1' ( IUID 010 )
No separation of components possible for externally created UII &3 ( IUID 016 )
UII &2 does not fit creation rules of corresponding IUID type &1 ( IUID 017 )
UII is set to external creation; internal creation of UIIs not possible ( IUID 018 )
There are pieces of equipment (e.g. &2) in plant &1 without UII ( IUID 023 )
IUID type missing in material master for material &1 in plant &2 ( IUID 024 )
Construct of UII & is used for internal creation, but master data missing ( IUID 043 )
UII &1 contains invalid characters ( IUID 051 )
Exactly &1 serial numbers/UIIs must be selected (instead of &2) ( IUID 052 )
Status "UII Status Undefined" cannot be assigned to UII &1 ( IUID 059 )
UII & cannot be sent to registry ( IUID 060 )
Profile &1 is already assigned to IUID-relevant material ( IUID 065 )
SerUsage for procedure MMSL of profile &1 has to be obligatory ( IUID 066 )
External UII &1 has already been sent. No change allowed. ( IUID 092 )
Create serial numbers and UIIs for each individual item ( IUID 099 )
Messages occurred; see application log ( IUID 102 )
Top-level UII is not unique in the hierarchy ( IUID 104 )
Inconsistent configuration of IUID message fields ( IUID 106 )
Message cannot be sent due to missing status "UII Attached" ( IUID 108 )
UII is external but no entry was found in the pedigree database ( IUID 110 )
Registry system could not be reached; no data retrieved from registry ( IUID 118 )
Unspecified or incorrect field name ( IUID 122 )
Pedigree data cannot be displayed ( IUID 123 )
Entry &1 is invalid for the "Configuration Action" field ( IUID 124 )
Entry &1 is invalid for the "Item Type" field ( IUID 125 )
Message cannot be sent ( IUID 127 )
Enter a serial number and UII first ( IUID 215 )
Serial number &1 or UII does not exist yet for material &2 ( IUID 223 )
IUID function not supported ( IUID_ESOA 001 )
IUID function is not activated ( IUID_ESOA 002 )
Confirmation without BAdI implementation makes no sense ( IUID_ESOA 007 )
&1 ( IUID_ESOA 009 )
In sender system, Table UMGPOCNV still contains records ( IUUC_IMIG 037 )
RELID field cannot be found in table &1 ( IUUC_INDX 002 )
INDX table settings have not been loaded completely ( IUUC_INDX 004 )
Error saving INDX settings in knowledge pool ( IUUC_INDX 008 )
Critical process option change for table &1 comitted by user &2 ( IUUC_MAIN 059 )
Manual execution of activity required; for details see activity document. ( IUUC_MAIN 061 )
For table &1, a process option change is not allowed ( IUUC_MAIN 065 )
Clone release must not be lower than productive release ( IUUC_MAIN 066 )
Processing incomplete due to selections - activity set to error state ( IUUC_MAIN 074 )
Delimitation not possible for table &1 ( IUUC_MAIN 089 )
Table &1: Don't specify both event and receiver field ( IUUC_MAIN 092 )
Table &1: Importing parameter missing for field-related rule! ( IUUC_MAIN 093 )
DELTA-Like Process Options not allowed for table &1 ( IUUC_MAIN 116 )
For Table &1, the process option should not be set to DELTA, or DELTA_FIN ( IUUC_MAIN 117 )
Table &1 refers to clone table &2 - should not be set to COMPLETE ( IUUC_MAIN 118 )
Check manually if all external interfaces have been disabled ( IUUC_MAIN 123 )
&1: Invalid Object definit (only one table on first and second level) ( IUUC_MAIN 155 )
Inconsistent rule assignment for field &1 of cluster &2 ( IUUC_MAIN 170 )
Different rules assigned to field &1 for tables &2 and &3 ( IUUC_MAIN 171 )
DMIS 2011 upgrade: type mappping not yet changed for mass transfer &1 ( IUUC_MAIN 236 )
Number range conflict: &1 ( IUUC_MAIN 250 )
Mass Transfer ID/Source Table/Logging Table: &1 Context: &2 &3 &4 ( IUUC_REPAIR 007 )
No valid package assigment for table &1 ( IUUC_TAB 008 )
Cross-client table &1 will be set to "freeze" ( IUUC_TAB 010 )
Table &1 will be set to "freeze", as its delivery class is &2 ( IUUC_TAB 011 )
Table &1 has not yet been classified for mass transfer ( IUUC_TAB 013 )
Process option conflict detected for physical cluster table &1 ( IUUC_TAB 014 )
The following tables are classified both as customer and SAP tables: ( IUUC_TAB 021 )
The table you added is a pool table ( IUUC_TAB 028 )
Invalid entries in Exception Table (IUUC_TABLE_EXCPT) ( IUUC_TAB 029 )
Text Table &1 should not be set to FREEZE, because it refers to &2 ( IUUC_TAB 031 )
For table &1, process option &2 is kept from previous conflict handling ( IUUC_TAB 032 )
Create target tables ( IV 003 )
Create 'unique indexes' on the target tables ( IV 004 )
Create Basis table with name & in SAP system ( IV 005 )
Create Basis table & on the database by renaming ( IV 007 )
Logically append indicator field & to table & ( IV 008 )
Physically append indicator field & to table & ( IV 009 )
Create a database procedure to set the indicator value ( IV 010 )
Create update trigger & ( IV 011 )
Create delete trigger & ( IV 012 )
Delete all dependent views on original table & ( IV 013 )
Modify the view definitions ( IV 014 )
Check dependent views of Basis table & ( IV 015 )
Optimize number of conversion processes ( IV 016 )
Check virtual original table & ( IV 017 )
Last data transfer ( IV 018 )
Delete virtual original table & ( IV 019 )
Delete all dependent views of Basis table & ( IV 020 )
Update the definition of the original tables ( IV 021 )
Activate the new original table & ( IV 022 )
Delete the temporary table definitions ( IV 023 )
Create original tables again ( IV 024 )
Delete key view & ( IV 025 )
Delete Basis table & ( IV 026 )
Set storage parameters of temporary tables ( IV 027 )
Create definition for additional access path & ( IV 028 )
Create runtime object for additional access path & ( IV 029 )
Create additional access path & ( IV 030 )
Stop conversion processes ( IV 031 )
Not all conversion processes could be stopped ( IV 032 )
Create indexes on the target tables ( IV 033 )
Deschedule all conversion processes ( IV 034 )
Create indicator index ( IV 036 )
Delete additional access path & ( IV 038 )
Create original definitions of the views again ( IV 039 )
Create views according to original definition ( IV 040 )
Unlock tables involved in the conversion ( IV 041 )
Activate the logical target tables ( IV 044 )
Last data transfer incomplete ( IV 046 )
Save runtime object & ( IV 051 )
Restore runtime object & ( IV 052 )
Table & missing target structure for incremental conversion ( IV 055 )
Plant copied from object ( IW 001 )
No object --> please enter plant ( IW 002 )
Plant does not exist in the system ( IW 003 )
This plant is not a PM planning plant ( IW 006 )
Order & was already created for this notification ( IW 007 )
Order has a budget -> WBS allocation not possible ( IW 008 )
Changes to object class not allowed ( IW 009 )
This function is only allowed for refurbishment orders -> long text ( IW 010 )
Creating an order with order type & is not allowed ( IW 011 )
MRP-relevance will be changed ( IW 012 )
Order cannot be changed ( IW 013 )
MRP-relevance will be changed ( IW 015 )
You have not entered a confirmation text ( IW 016 )
Technical completion not possible ( IW 019 )
Transaction IW3K not available for historic maintenance/service orders ( IW 020 )
Transaction IW3L not available for historic maintenance/service orders ( IW 021 )
Material & only for individual requirements (check entry) ( IW 022 )
Changing the sign is not allowed ( IW 023 )
System: valuation area & not defined ( IW 026 )
System: Company code & not defined ( IW 027 )
Business area required --> please enter business area ( IW 028 )
Business area & not defined (--> F4) ( IW 029 )
Object has deviant business area ( & ) ( IW 030 )
Cost settlement area of planning plant not the same as work center plant ( IW 031 )
Profit center & only valid in the future ( IW 032 )
Changes to business area not allowed ( IW 033 )
Changes to profit center not allowed ( IW 034 )
Order and sales order controlling areas are different ( IW 035 )
Plant &1 from order/notification is different to plant &2 in sales order ( IW 036 )
Contrl.area & of WBS element <> control.area & of PM order ( IW 037 )
Controlling area of component (&1) differs from order (&2) ( IW 038 )
Order and reference object have different controlling areas ( IW 039 )
Business area entered subsequently for posted order ( IW 040 )
Work center &1 in plant &2 does not exist ( IW 051 )
Error when reading work center &1 plant &2 (return code &3) ( IW 052 )
Work center &1 plant &2 not allowed for Plant Maintenance ( IW 053 )
Main work center does not exist (internal key : &) ( IW 054 )
Main work center & does not exist in plant & in the system (any more) ( IW 055 )
Work center change --> default data redefined ( IW 056 )
Cost center assignment to main work center has not been maintained ( IW 057 )
Confirm manual change of work center before assigning service type ( IW 058 )
No WBS element is assigned to the order ( IW 060 )
No sales order is assigned to the order ( IW 061 )
Invalid account assignment category (->long text) ( IW 063 )
Changes to special stock are not possible ( IW 064 )
The sales order is not assigned to a project account ( IW 067 )
Relevance to material planning is set to 'from release' ( IW 070 )
Cannot save, please maintain purchasing data first ( IW 076 )
The order was not saved ( IW 077 )
Save rejected by system ( IW 079 )
The order should not be saved (--> customer exit) ( IW 084 )
Purchase requisition could not be generated ( IW 088 )
Please enter unit of duration/work ( IW 101 )
Error during purchase requisition creation (RC = &) ( IW 102 )
System: Header operation flag does not exist (program error) ( IW 103 )
Please enter valid control key ( IW 104 )
Info record --> Enter purchasing organization ( IW 105 )
External operation --> please enter price unit ( IW 106 )
External operation --> please enter currency key ( IW 107 )
Cost element &1 in company code &2 is not valid for &3 ( IW 108 )
External operation --> please enter operation quantity and quantity unit ( IW 109 )
Please maintain external processing data ( IW 110 )
External operation --> please enter purchasing group ( IW 111 )
External operation --> please maintain short text ( IW 112 )
External operation --> please enter cost element ( IW 113 )
Info record &1 &2 &3 does not exist ( IW 114 )
Data transferred from info record ( IW 115 )
Maintain price and price unit together ( IW 116 )
External operation --> please enter material group ( IW 117 )
The new control key does not allow external processing ( IW 118 )
Please enter a unit of time ( IW 119 )
Activity type &1 &2 &3 does not exist (--> F4) ( IW 120 )
Activity type &1 &2 &3 in fiscal year &4 not valid ( IW 121 )
Materials cannot be allocated to sub-operations ( IW 122 )
Please select operation ( IW 123 )
Automatic operation created ( IW 124 )
No operation selected ( IW 125 )
Start time interval may not be negative ( IW 128 )
End time interval may not be positive ( IW 129 )
Cannot enter execution factor for sub-operation &1 &2 ( IW 130 )
No execution factor can be maintained for operation & ( IW 131 )
The relationships for the operations selected will be deleted ( IW 135 )
No purchase requisition exists for component &2 operation &1 ( IW 136 )
No relationships possible for sub-operations ( IW 137 )
Consecutive key & & not maintained ( IW 139 )
Enter either info record or outline agreement ( IW 141 )
Fixed operation quantity indicator for operation & cannot be set ( IW 142 )
No service package in historical order: Reset control keys ( IW 143 )
Your control key entry was canceled ( IW 144 )
Set & to operation list ( IW 145 )
No assembly defined for operation & --> Function not possible ( IW 146 )
Enter a value not equal to 0 ( IW 147 )
&1 operations not changed owing to fixed/service indicator ( IW 148 )
Purchase requisition for operation & could not be generated ( IW 149 )
PM planner group &1 in plant &2 does not exist ( IW 151 )
System: Maintenance order header does not exist ( IW 152 )
Revision dates copied for start/end dates ( IW 153 )
Scheduling type defined by system ( IW 154 )
No scheduling type maintained ( IW 155 )
Scheduling type & does not exist ( IW 156 )
Transaction not in start control table ( IW 157 )
Control table for order not maintained ( IW 158 )
Control table missing (TCODE = &) ( IW 159 )
Parameters for Maintenance do not exist ( IW 160 )
No authorization in plant &1 for order type &2 ( IW 162 )
Enter a valid scheduling type ( IW 164 )
System: Internal error in document table ( IW 165 )
System: Movement type cannot be defined, KEY & ( IW 166 )
System: Order type &1 will be reversed, order type &2 will be set ( IW 167 )
Deletion indicator active --> display only ( IW 168 )
No assembly --> Function not possible ( IW 169 )
Key word & not recognized ( IW 170 )
Selection: by general maint.task list w/o assembly reference ( IW 171 )
Error occured during budget check, see cost protocol ( IW 172 )
Not all mandatory partners could be determined automatically ( IW 174 )
Order cannot be completed; account assignment not maintained ( IW 177 )
Order & could not be archived: -> Error log ( IW 178 )
System: Automatic release not successful ( IW 179 )
Order status --> Inclusion of equipment/general task list not possible ( IW 180 )
No default could be formed for the distribution rule ( IW 181 )
Default was formed for the distribution rule ( IW 182 )
Settlement rule already exists ( IW 183 )
System: Order not flagged for deletion ( IW 184 )
System: Order already flagged for deletion ( IW 185 )
Order & was not yet technically completed ( IW 186 )
Order release not successful --> see error log ( IW 187 )
Superior order & already completed ( IW 188 )
There are still open suborders for &1 ( IW 189 )
Order is not released ( IW 190 )
Priority type not maintained for orders ( IW 191 )
No priorities exist for order priority type ( IW 192 )
Dates were determined by priority ( IW 193 )
Check the settlement rule ( IW 194 )
Check the priority ( IW 195 )
Purchase requisition could not be generated for component & ( IW 196 )
Calculation of labor made in service package --> calculation key replaced ( IW 197 )
Create a service package for external operation & & ( IW 198 )
Execution factor was reset ( IW 199 )
System: Order type not fully maintained ( IW 201 )
Order type cannot be used for maintenance orders ( IW 202 )
Invalid combination of order type and maintenance activity type ( IW 203 )
Order type &1 not maintained for plant &2 (--> F1) ( IW 204 )
Order type does not exist ( IW 205 )
Order type not fully maintained ( IW 206 )
No order types have been maintained for Plant Maintenance ( IW 207 )
Contract selection is only possible for service orders ( IW 208 )
Contract selection is not possible for this service order type ( IW 209 )
Creating service orders from sales orders is not possible ( IW 210 )
Order type cannot be used for refurbishment orders ( IW 211 )
Refurbishment order cannot be used as reference ( IW 212 )
Historical order cannot be used as reference ( IW 213 )
Reference date is in the future ( IW 214 )
Purchase order item &2 &3 of order &1 still without final billing indic. ( IW 215 )
Service/maintenance order type &1 not completely maintained in plant &2 ( IW 216 )
No inspection lot could be generated for order &1 ( IW 217 )
No inspection lot created for order &1, since technical object has errors ( IW 218 )
Purchase order item &2 &3 for &1 still without final invoice indicator ( IW 219 )
The organization data is determined again ( IW 224 )
System: PM notification & cannot be locked ( IW 229 )
System: Termination when you set status &1 return code: &2 ( IW 230 )
Number entered is not a PM notification ( IW 231 )
Order status allows display only ( IW 232 )
Different revision numbers in order and notification ( IW 242 )
Different network in revision and order ( IW 243 )
System : Printing data missing ( IW 251 )
No shop papers have yet been created ( IW 252 )
Shop papers have already been printed ( IW 254 )
System: Status "printed" could not be set ( IW 255 )
Cannot print, due to status ( IW 256 )
Print view from list not allowed. Papers will be created ( IW 257 )
Selections for individual operation print noted ( IW 258 )
No operations selected for printing. All operations selected again ( IW 259 )
No shop papers were generated ( IW 262 )
Task list: Material &1 does not exist in plant &2 ( IW 277 )
Maintain material short text for material &1 in language &2 ( IW 278 )
Purchasing data for material & has not been maintained ( IW 279 )
No price can be determined for material & ( IW 280 )
Please maintain purchasing data for material components ( IW 281 )
No materials allocated -> Availability check not possible ( IW 282 )
Material availability missing for order $ (please note log) ( IW 283 )
Maintain material availability control for status "created": & & & ( IW 285 )
Maintain material availability control for status "released": & & & ( IW 286 )
Material availability control does not allow material availability check ( IW 287 )
Caution: & operations have been deselected ( IW 288 )
No negative quantity specification allowed for non-stock materials ( IW 293 )
A change in the relevancy for materials planning is not possible ( IW 294 )
Relevance to MRP set at 3, as order released or activated ( IW 295 )
Default values for 'costing' and 'movement allowed' were set ( IW 296 )
Reservations and purchase requisitions effective from now on ( IW 297 )
Quantity of component & was rounded up ( IW 298 )
An equipment must be entered before making an assembly selection ( IW 301 )
No bill of material exists ( IW 302 )
No reference object selected ( IW 303 )
The order was created w/o reference to a notification ( IW 304 )
The order has no reference to a functional location ( IW 305 )
No equipment was entered in the order ( IW 306 )
It is not possible to branch to a temporary reference object ( IW 307 )
The valuation type &2 is changed for material &1 according to Customizing ( IW 308 )
The time sheet (CATS) is used for confirmation &1/&2 ( IW 314 )
Deletion of a Servie Activity Not Possible Without Service Lines ( IW 315 )
Equipment task list selectn not possible, as order contains no equipment ( IW 321 )
Task list selection for order from maintenance plan not allowed ( IW 323 )
Task list selection not possible due to order status ( IW 324 )
System: No operations could be determined ( IW 327 )
Include task list: operation number - number overflow ( IW 328 )
No package for call exists ( IW 331 )
Maintenance plan data in order header incomplete ( IW 332 )
Posting terminated &1 with SY-Subrc &2 ( IW 335 )
Caution: last counter entry more than 3 days ago ( IW 336 )
Cost Determination Error Prev. Maintenance Plan & ( IW 337 )
No operations w/ valid maintenance packages available in maintnce plan & ( IW 338 )
Reference object data has been updated ( IW 345 )
System: Status object does not exist ( IW 351 )
System: Status profile &1 not allowed with object type &2 ( IW 352 )
Status of Assigned Notif. & for Order & Does Not Allow Deletion Indicator ( IW 353 )
Higher-level order & is locked ( IW 354 )
Internal error occurred (IPHAS) ( IW 355 )
Do not transfer business operation or status ( IW 357 )
Status could not be changed ( IW 358 )
System: CUA status could not be determined ( & & ) ( IW 361 )
System: Entry in system table does not exist ( & & & & & ) ( IW 376 )
Data has been copied from the framework order ( IW 377 )
Only enter framework contract or framework order ( IW 378 )
Purchasing org. or vendor may not deviate from framework order ( IW 380 )
Contract and info record cannot be specified simultaneously ( IW 382 )
System: Interval for number assignment does not exist ( IW 401 )
System: No external number range ( IW 402 )
System: Number range object does not exist ( IW 403 )
Number & not in external interval ( IW 404 )
Order type & requires external number --> assigned after ENTER ( IW 406 )
Interval: & to & ( IW 407 )
Date & is after the valid factory calendar period ( IW 432 )
Date & is before the valid factory calendar period ( IW 433 )
Date is invalid ( IW 434 )
Factory calendar & does not exist ( IW 435 )
Start date is in the future ( IW 439 )
End date is in the future ( IW 440 )
Duration for operation & not entered ( IW 442 )
Equipment &1 has no valid equipment usage period for &2 &3 ( IW 445 )
Cost display: Report group does not exist ( IW 451 )
Costs were determined: See cost overview ( IW 454 )
Cost display: Report group is not up to date ( IW 455 )
You have no authorization to display costs ( IW 456 )
Settlement area & for controlling area & not maintained ( IW 457 )
No settlement rule could be created ( IW 458 )
Order will be settled to sales order item & & ( IW 459 )
Order will be settled to PSP element & ( IW 460 )
Error during cost determination ( IW 463 )
Field '&1' must still be filled ( IW 464 )
Customer & not created for sales org. & distribution channel & division & ( IW 477 )
One or more maintenance items do not have packages assigned to them yet ( IW 478 )
Goods issue already posted: Reassignment not possible ( IW 490 )
Purchase order already created: Reassignment not possible ( IW 491 )
Operation &1 with subcontracting: Reassignment not possible ( IW 493 )
Object change ==> Order data might not be the same as default values ( IW 501 )
Project in order ( &1 ) different to project from object ( &2) ( IW 502 )
Object ref. -> Location and account assignment data copied from object ( IW 504 )
Obj. has no default project: project allocation in order remains & ( IW 505 )
Contrl.area & of WBS element different to control.area & of PM order ( IW 506 )
No network activity maintained, dates copied from WBS element ( IW 508 )
Rule for allocation of PM order to PS network is not maintained ( IW 509 )
Order number identical with network number ( IW 512 )
Old WBS element remains unchanged ( IW 513 )
Assigning PM Order to WBS Element & is not Allowed ( IW 516 )
WBS Old: '&1', WBS New '&2', WBS From PM Object: '&3' ( IW 517 )
Problems when completing notifications during RFC ( IW 518 )
Component & has the material status & ( IW 519 )
Automatic release failed ( IW 520 )
No profile determined ( IW 526 )
Enter a preceding order for the follow-on order ( IW 542 )
Order has not been released and cannot therefore act as preceding order ( IW 544 )
The operation you entered has been ignored; all operations were copied ( IW 545 )
All operations have also been copied to the new order ( IW 546 )
The order has no settlement rule ( IW 551 )
Profit center in order different to default entry ( IW 552 )
Assignment f. capital investment program not possible, project maintained ( IW 553 )
Customer-specific check result: release refused ( IW 555 )
System: field overflow during duration calculation ( IW 556 )
Order cannot be released: settlement rule not maintained ( IW 557 )
Assigned notifications completed when you save ( IW 559 )
Order has status 'technically completed' ( IW 560 )
Completion not possible --> perform settlement first ( IW 561 )
Problems occured when generating the default accounting rules ( IW 563 )
Deletion flag in order & not activated, therefore not closed ( IW 564 )
WBS Element & was not (!) Included in the Order ( IW 565 )
Order has commitments ---> recall purchase order ( IW 568 )
Order cannot be completed ---> Balance/Commitments ( IW 569 )
Partner changed: Redefining delivery address may be necessary ( IW 570 )
The order's settlement profile does not allow settlement ( IW 571 )
Status management: Warning for settlement rule ( IW 573 )
Status management: Maintenance/formation of settlement rule not allowed ( IW 574 )
Error with assignment for program item &1 / &2 / &3 ( IW 575 )
Program item: No automatic assignment possible ( IW 576 )
Investment Management: No program item determined ( IW 577 )
Service package available: Conversion of control key not possible ( IW 578 )
Order has commitment -> Delete external PReq (-> Long text) ( IW 579 )
Number overflow: Renumbering not possible ( IW 580 )
Service package: The operation info record was deleted ( IW 581 )
The assigned settlement profile does not allow a settlement ( IW 582 )
No maintenance plan has been confirmed for &3 &1; &2 ( IW 597 )
&3 &1 were not completed; no maintainance plan confirmation takes place ( IW 598 )
Last operation from notification &1 deleted ( IW 599 )
Operation created from order header data ( IW 601 )
Maintain equipment and task list group counter for equipment task list ( IW 603 )
Maintain func. loc. and task list gp. counter for func. loc. task list ( IW 604 )
Task list & & & from sales exit incorrect ( IW 605 )
Use for PM-valid task list types (A,E,T) ( IW 606 )
General maintenance task list & & not included owing to deletion flag set ( IW 610 )
Equipment task list & & not included owing to deletion flag set ( IW 611 )
Functional location task list & & not included owing to deletion flag set ( IW 612 )
No operations available for selection in chosen maintenance task list & & ( IW 613 )
No operations available for selection in chosen equipment task list & & ( IW 614 )
No operations available for selection in chosen funct. loc. task list & & ( IW 615 )
General maintenance task list & & has already been included ( IW 616 )
Equipment task list & & has already been included ( IW 617 )
Functional location task list & & has already been included ( IW 618 )
Sort operations not possible owing to order operation & ( IW 619 )
Product total quantity * execution factor is too large ( IW 620 )
Execution factors changed according to total quantity ( IW 621 )
Work center selection necessitates operation selection ( IW 624 )
Operation sort only usable with certain constellation (see long text) ( IW 625 )
Operation &3: work center &1 is only allowed until release ( IW 628 )
Suboperation &3/&4: work center &1 is only allowed until release ( IW 629 )
Warning: Permits still to be issued before order is released ( IW 651 )
Order release refused as permits are still missing ( IW 652 )
Warning: Permits still to be issued before order is completed ! ( IW 653 )
Order completion refused as permits are still missing ( IW 654 )
Revision &1 is already completed ( IW 655 )
Wage type & does not exist ( IW 701 )
& is not a maintenance order ( IW 702 )
Work center &1 plant &2 is locked ( IW 703 )
Deletion flag set for work center &1 plant &2 ( IW 704 )
Lock and deletion flag set for work center &1 plant &2 ( IW 705 )
Warning: A purchase order already exists ( IW 706 )
Purchase order available for operation & ( IW 707 )
Purchase order available for sub-operation &1 &2 ( IW 708 )
The data of this order were transferred to a mobile device ( IW 711 )
Operations of the order are processed on a mobile device ( IW 712 )
Processing of notification has already started ( IW 721 )
The operation & that you entered is not in the preceding order ( IW 725 )
Preceding and follow-on order cannot be displayed ( IW 726 )
There is no object link to the order header for document type & ( IW 730 )
There is no object link to the order operation for document type & ( IW 731 )
Documents with document type & cannot be assigned to the order header ( IW 732 )
Documents with document type & cannot be assigned to the order header ( IW 733 )
Documents with document type & cannot be assigned to the order operation ( IW 734 )
Documents with document type & cannot be assigned to the order operation ( IW 735 )
No time dimension could be determined ( IW 746 )
No unit for day/hour could be determined ( IW 747 )
Scheduling will be changed to reflect inclusion of relationships ( IW 751 )
Scheduling will be changed to reflect exclusion of relationships ( IW 752 )
Item & material &: Reqmnt qty & smaller than GR qty & ( IW 756 )
Complete structuring --> do you want to set limit? ( IW 776 )
All capacities are available ( IW 800 )
There is a capacity overload ( IW 801 )
Work or duration not maintained ( IW 802 )
No personal master record exists for person & ( IW 803 )
All confirmations for capacities reset ( IW 804 )
No persons found for the work center ( IW 806 )
No orders exist for person & ( IW 807 )
Time information could not be read ( IW 809 )
The duration must be less than 24 hours ( IW 810 )
More than one person has already been assigned to this operation ( IW 811 )
The person proposed cannot be assigned to the operation ( IW 812 )
The item category & determined by the System is not a stock item category ( IW 822 )
Item &: Deletion of components to be repaired not planned ( IW 823 )
Material & has no serial no. profile -> object list not to be maintained ( IW 824 )
Automatic serial number assignment for refurbishment is not advisable ( IW 825 )
Object should be entered automatically in object list -> invalid status ( IW 826 )
Quantities were not adjusted for & service operations ( IW 827 )
Material & has serial no. which requires a serial no. in the object list ( IW 828 )
Reference object screen type not allowed for Plant Maintenance ( IW 831 )
Automatic serial number assignment for refurbishment is not advisable ( IW 832 )
Only PM and CS notification types allowed as notification type proposal ( IW 835 )
Entry equipment with funct. location, material and serial no. not allowed ( IW 836 )
Enter all values for the sales area ( IW 837 )
For the sales office, maintain all data for the sales area ( IW 838 )
No valuation types are defined for material &1 in plant &2 ( IW 840 )
Only QM notification types are allowed as notification type proposals ( IW 841 )
Reference object screen type is not allowed for Quality Management ( IW 842 )
Storage location &1 is HU administered. ( IW 843 )
Work for activity & is too large - check ( IW 845 )
Duration for activity & is too large - check ( IW 846 )
Quantity of component & is too large - check ( IW 847 )
Operation quantity for operation & is too large - check ( IW 848 )
Work for sub-operation &1 &2 is too large - check ( IW 849 )
Duration for sub-operation &1 &2 is too large - check ( IW 850 )
Operation quantity for sub-operation &1 &2 is too large - check ( IW 851 )
Number of serial numbers is larger than the order quantity ( IW 852 )
Release not possible: Number of serial numbers larger than order quantity ( IW 853 )
Location or account assignment data could not be derived from object & ( IW 855 )
Order type &1 can only be used for refurbishment ( IW 856 )
Enter a valuation type for material &1 in the "Batch" field ( IW 860 )
Enter a batch for material &1 ( IW 861 )
Enter a functional location ( IW 866 )
Enter a piece of equipment ( IW 867 )
Enter a serial number ( IW 868 )
Enter an assembly ( IW 869 )
You must specify a batch for material &1 ( IW 870 )
'Not perform' is not possible ( IW 886 )
The quotation cannot be declined ( IW 887 )
'Accept quotation" not possible ( IW 888 )
Internal error occurred: LOOP for screen_leave ( IW 889 )
No sales and distribution document type available ( IW 890 )
Material subject to serial number not possible for external warehouse ( IW 896 )
Deletion indic.for purch. req. components was not deleted (see long text) ( IW 900 )
Deletion indicator for trans. purch. req. was not deleted (see long text) ( IW 901 )
Where-used list only possible if you specify the technical object ( IW 925 )
Error position is not in the structure (see long text) ( IWB_42 152 )
External number assignment is foreseen for order type &1 ( IWO_BAPI 101 )
No external number assignment is foreseen for order type &1 ( IWO_BAPI 102 )
Order number &1 is not in the interval from &2 to &3 ( IWO_BAPI 103 )
Refurbishment orders cannot be processed using BAPIs ( IWO_BAPI 104 )
No service-specific data can be maintained for order type &1 ( IWO_BAPI 105 )
No sales document can be assigned to service order type &1 ( IWO_BAPI 106 )
The sales document item in order &1 may not be changed ( IWO_BAPI 107 )
No changes to the cost estimate allowed ( IWO_BAPI 112 )
Order &1 is locked and cannot be changed ( IWO_BAPI 124 )
The deletion flag is set in order &1: No changes possible ( IWO_BAPI 126 )
Order &1 is technically completed and cannot be changed ( IWO_BAPI 127 )
General task list for &1 from sales document &2 / &3 is not linked ( IWO_BAPI 131 )
The service product is not changeable for the assigned sales document ( IWO_BAPI 132 )
A configurable service product can not be used ( IWO_BAPI 133 )
General maintenance task list for service product &1 cannot be integrated ( IWO_BAPI 134 )
The sales organisation data in order &1 cannot be changed ( IWO_BAPI 135 )
The billing form in order &1 cannot be changed ( IWO_BAPI 136 )
The dynamic item processor profile in order &1 cannot be changed ( IWO_BAPI 137 )
An order with order type &1 is not an investment order ( IWO_BAPI 141 )
FM account assignment incomplete: No reservation/purchase req. activation ( IWO_BAPI 151 )
No activation for reservation effectivity/purch. req. generation 'Never' ( IWO_BAPI 153 )
Reservation effectivity/purch. req. 'Immediate' can no longer be changed ( IWO_BAPI 154 )
Credit limit check for order &1 was terminated due to missing data ( IWO_BAPI 163 )
Order &1 has not been released ( IWO_BAPI 167 )
Order &1 with external number changed during creation ( IWO_BAPI2 109 )
Text lines from &1 to &2 not (completely) available ( IWO_BAPI2 111 )
After SAVE method, COMMIT WORK or ROLLBACK WORK must be executed ( IWO_BAPI2 128 )
WBS element with the internal number &1 cannot be converted ( IWO_BAPI 405 )
Task list &1 &2 &3 cannot be integrated ( IWO_BAPI 501 )
It is not possible to delete operations for refurbishment orders ( IWO_BAPI 502 )
It is not possible to delete operations when integrating task lists ( IWO_BAPI 503 )
No operations were selected ( IWO_BAPI 504 )
Partner maintenance: Incomplete reference to partner to be changed &1 ( IWO_BAPI 701 )
Partner maintenance:Incomplete reference to partner role to be changed &1 ( IWO_BAPI 702 )
Partner maintenance: Referenced partner &1 &2 is not assigned ( IWO_BAPI 703 )
Partner maintenance: Referenced partner &2 with invalid partner role &1 ( IWO_BAPI 704 )
Partner maintenance:Deletion of partner role from partner &1 &2 forbidden ( IWO_BAPI 706 )
Partner maintenance: Partner number missing for an entry with role &1 ( IWO_BAPI 707 )
Partner maintenance: Partner role missing for an entry with partner &1 ( IWO_BAPI 708 )
Partner maintenance: Multiple changes to partner &1 &2 not possible ( IWO_BAPI 709 )
Partner maintenance: Referenced partner &1 &2 is already deleted ( IWO_BAPI 711 )
Partner data cannot be maintained for order type &1 ( IWO_BAPI 712 )
Material number & is not included in the object list ( IWO_BAPI 851 )
Serial number &1 and material &2 are not in the object list ( IWO_BAPI 852 )
Equipment &1 and assembly &2 are not included in the object list ( IWO_BAPI 854 )
Functional location &1 is not included in the object list ( IWO_BAPI 855 )
Functional location &1, assembly &2 are not contained in the object list ( IWO_BAPI 856 )
Assembly &1 is not included in the object list ( IWO_BAPI 857 )
No tab page is assigned for pushbutton &1 in profile &2 ( IWO_UI 801 )
Tab page &1 is not available in profile &2 for &3 ( IWO_UI 802 )
No active tab page is assigned to the profile &1 ( IWO_UI 803 )
Metadata not included in &1 ( IWP 004 )
Name of audit package contains non-allowed characters ( IWP 022 )
InfoObject /ILM/KDUMMY does not exist ( IWP 051 )
Keys of table &1 do not agree with registered compounds of InfoObject &2 ( IWP 100 )
You are not authorized to create an audit package ( IWP 201 )
You are not authorized to delete an audit package ( IWP 202 )
You are not authorized to extract an audit package to BI ( IWP 203 )
You are not authorized to display generated objects in BI ( IWP 204 )
You are not authorized to display the table browser ( IWP 205 )
You are not authorized to call audit trail ( IWP 206 )
You are not authorized to delete the audit package content in BI ( IWP 207 )
You are not authorized to display the download browser ( IWP 208 )
You are not authorized to delete files for local reporting ( IWP 209 )
You are not authorized to restart a job ( IWP 210 )
Select at least one structure that needs to be extracted ( IWP 508 )
Select the BI object type (DSO or InfoCube) to be created ( IWP 515 )
The selected structures are not related - you can continue anyway ( IWP 530 )
BI object type cannot be changed once set, so use caution ( IWP 533 )
Audit package with status &1 cannot be extracted ( IWP 536 )
Error during archive access, see long text ( IWP 570 )
Proposal of join condition not possible for table/view &1, see long text ( IWP_BUR 031 )
Maintain output fields that belong to field catalog &1 as sel.parameter ( IWP_BUR 046 )
Customer & does not exist ( IX 001 )
Response profile & does not contain necessary tasks ( IX 002 )
Enter the response time and duration ( IX 006 )
Partner function & is not allowed in partner determination profile & ( IX 007 )
Enter a function ( IX 008 )
No functions defined for the partner determination profile & entered ( IX 009 )
Enter a partner ( IX 010 )
Partner function & can only be used once ( IX 011 )
No possible entries can be displayed for this partner function ( IX 015 )
No partner selected ( IX 016 )
Partner function & must not be deleted ( IX 017 )
Partners with function & must not be changed ( IX 018 )
Enter the mandatory partner ( IX 019 )
No object master records can be displayed for partners with function & ( IX 020 )
No partner was entered with the function of payer ( IX 022 )
Task code & is not defined in any appropriate code group ( IX 024 )
First define appropriate task codes ( IX 025 )
Priority & is not defined for any priority type ( IX 026 )
First maintain the organizational data ( IX 027 )
Organizational unit & does not exist ( IX 028 )
Position & does not exist ( IX 029 )
& & results on the basis of the customer entered ( IX 030 )
User & does not exist ( IX 031 )
Usage of one-time customers not supported ( IX 032 )
Partner number & does not exist ( IX 033 )
Custmr & not created f. SalesOrg. & DistribChannel & division & ( IX 034 )
Choose a line for selection ( IX 035 )
Partner determ. procedure & not allowed for Plant Maintenance ( IX 037 )
Partner determination procedure & is not allowed for Customer Service ( IX 038 )
Partner determ. procedure & not allowed for Quality Management ( IX 039 )
Resource-related billing only allowed for service orders ( IX 041 )
Doc. type/profile for resource-related billing only for service orders ( IX 042 )
No document type defined for resource-related billing ( IX 043 )
Service order billing is through the WBS element ( IX 044 )
Service order is not assigned to a sales order or a contract ( IX 045 )
The customer account group is not allowed for the partner function ( IX 046 )
Partner & with function & has been deleted ( IX 048 )
Sales document item & & was cancelled. ( IX 054 )
Contract item & & does not refer to the reference object ( IX 055 )
The outline agreement item & & is not valid on & ( IX 056 )
No cost management is provided for sales document item & & ( IX 057 )
Sales document & is not a maintenance contract ( IX 058 )
No partner determination procedure is assigned to the object ( IX 060 )
No person could be determined ( IX 067 )
Credit limit check not possible ( IX 071 )
Different customer in document and contract & ( IX 072 )
Address copy not supported for this partner type ( IX 079 )
& partner(s) deleted according to partner determination procedure ( IX 080 )
Contact person cannot be deleted because used in &1 PM objects ( IX 083 )
Contact person cannot be deleted because used in EAM order &1 ( IX 086 )
Contact person cannot be deleted because used in EAM notification &1 ( IX 087 )
Error while converting CF indicator to CF type ( J# 025 )
Error in &. See long text ( J# 028 )
No scenario data found ( J# 034 )
The forward curve and the simulated transaction have different currencies ( J# 040 )
Forward curve not maintained for the reference interest rate ( J# 041 )
A serious error occured during individual simulation ( J# 042 )
Error during currency translation for a simulated transaction ( J# 043 )
The planning variant contains a currency parameter that is not permitted ( J# 044 )
Standard interest calculation method act/365 used ( J# 047 )
No settings for write-down rule &1 in evaluation type &2 ( J# 051 )
No key figures exist for the financial object ( J# 052 )
The book value in transaction currency not found ( J# 053 )
The book value in local currency was not found ( J# 054 )
The purchase price in transaction currency was not found ( J# 055 )
Purchase price in local currency not found ( J# 056 )
Error when calculating the depreciation risks ( J# 057 )
Error when calculating the depreciation risks ( J# 058 )
Base portfolio &1 in company code &2 has no key figures ( J# 059 )
Unable to determine the yield curve ( J# 071 )
Simulation category & not appropriate for gap evaluation & ( J# 101 )
The 'date from' (&) must be earlier than or the same as the 'date to' (&) ( J# 102 )
No data was entered, therefore no transactions were saved ( J# 103 )
View &V1& and PH &V2& belong to planning variant &V3&; see long text ( J# 109 )
Maturity band is not absolute; choose an absolute maturity band ( J# 110 )
Simulation based on all transactions in evaluation currency ( J# 112 )
Simulation is not possible on this node ( J# 113 )
You cannot maintain characteristics on this node ( J# 114 )
Simulation category & not currently supported ( J# 115 )
Simulation category & is not currently supported in individual simulation ( J# 116 )
Error when processing fictitious transactions ( J# 118 )
End of term set to & ( J# 123 )
Unable to determine an interest rate ( J# 124 )
Error when determining payment amount based on exchange rate and amount ( J# 128 )
Error when determining the exchange rate from payment amounts ( J# 129 )
The entered payment amounts and exchange rates do not correspond ( J# 130 )
The entered payment amounts and exchange rates do not correspond ( J# 131 )
Unable to determine an exchange rate ( J# 133 )
Error when converting to the enhanced risk object ( J# 134 )
Error when determining the simulated positions and their items ( J# 135 )
Error when saving simulated transactions/positions to the database ( J# 136 )
Error when generating the financial objects for the simulated positions ( J# 137 )
Error during extended maintenance of characteristic values ( J# 138 )
No new simulation run number could be read ( J# 139 )
Default settings are missing in the planning variant ( J# 207 )
The maturity band determined is relative ( J# 208 )
The simulated transactions cannot be saved without a planning variant ( J# 210 )
Characteristics co.code and summarization rule were set to default (&, &) ( J# 211 )
Error when generating the portfolio hierarchy ( J# 231 )
Error when saving the planning variant ( J# 233 )
Error when deleting due date scenario &1 from the database ( J# 407 )
Error occurred when saving changes to the database ( J# 409 )
Error when saving due date scenario &1 ( J# 411 )
An error occurred when deleting due date period &1 from the database ( J# 413 )
Error occurred when saving changes to the database ( J# 415 )
Error occurred when saving due date period &1 ( J# 417 )
Short description &1 already exists for another due date scenario ( J# 419 )
Short description &1 already exists for another due date period ( J# 420 )
Choose a smaller time unit for the subincrement (&1) ( J# 427 )
Choose a smaller subincrement (&1) ( J# 428 )
Combination of base amount + time unit for subincrement is not permitted ( J# 429 )
Combination of inflow and time unit for subincrement is invalid ( J# 431 )
The data cannot be displayed: the maximum list width was reached ( J# 600 )
Error during dynamic callup of the ALV tool ( J# 601 )
Error when generating program sections ( J# 602 )
Error in list column control ( J# 603 )
Error in ABAP List Viewer ( J# 604 )
Error in FRA processing ( J+ 001 )
Error formatting data ( J+ 002 )
No flows selected for loan & ( J+ 003 )
Int./repaymnt/discount/premium payment not identified for cash flow ind. ( J+ 004 )
Error when analyzing stocks ( J+ 005 )
Financial transaction is not an account or non-interest bearing position ( J+ 006 )
Unable to process cash flow indicator '&1' ( J+ 007 )
The financial transaction is not a bond ( J+ 008 )
Unable to process cash flow type '&' for bonds ( J+ 009 )
Error in cash flow for bond & ( J+ 010 )
The financial transaction is not a foreign exchange transaction ( J+ 011 )
Unable to display gap analysis for a transaction ( J+ 012 )
Unable to find market data for forward exchange transaction ( J+ 013 )
Error formatting data ( J+ 014 )
Transaction is not a stock ( J+ 015 )
No flows exist for one of the financial transactions ( J+ 016 )
No transactions for gap analysis ( J+ 018 )
Error while dereferencing a variable interest rate ( J+ 019 )
Unable to carry out interest rate fixing ( J+ 020 )
Error in position object &1, company code &2 ( J+ 021 )
Error in financial transaction &, company code & ( J+ 022 )
The financial transaction is not a non-interest-bearing position ( J+ 023 )
The financial transaction is not a warrant bond ( J+ 024 )
The financial transaction is not a convertible bond ( J+ 025 )
Unable to process cash flow type '&' for warrant bonds ( J+ 026 )
Unable to process cash flow type '&' for convertible bonds ( J+ 027 )
Error in cash flow for warrant bond & ( J+ 028 )
Error in cash flow for convertible bond & ( J+ 029 )
Financial transaction is not a stock index future ( J+ 030 )
No due date scenario found ( J+ 031 )
Error while structuring due date scenario ( J+ 032 )
Due date scenario & not found ( J+ 033 )
Total of percentages for due date scenario &V1& is negative ( J+ 034 )
No interest payments can be simulated due to missing data ( J+ 035 )
Program error occurred when processing portfolio hierarchy & ( J+ 036 )
Error when selecting transactions ( J+ 037 )
Error in central analysis module ( J+ 038 )
Error in processing module for gap data ( J+ 039 )
Error when filling the market segments for financial transaction &1 ( J+ 040 )
Error when filling the market segments for position object &1 ( J+ 041 )
Error during analysis of flows of underlying of future position ( J+ 042 )
Error during distribution of payments to maturity band & ( J+ 043 )
Error while processing zero bonds ( J+ 044 )
Financial transaction is not a future ( J+ 049 )
Asset/liability indicator & not appropriate for money market transactions ( J+ 053 )
Asset/liability indicator for future & not set to off-balance sheet ( J+ 054 )
Asset/liability indicator & not appropriate for securities ( J+ 055 )
Asset/liability indicator not set ( J+ 056 )
Balance sheet indic. & not appropriate for forex/forward exch. trans. ( J+ 057 )
Asset/liability indicator & not appropriate for stock ( J+ 060 )
Error when selecting loans ( J+ 062 )
The last message refers to security order &1 ( J+ 063 )
The last message refers to financial transaction &1 ( J+ 064 )
No flows selected ( J+ 065 )
Asset/liability indicator & not appropriate for loans ( J+ 066 )
Asset/liability indicator is incorrect ( J+ 067 )
Asset/liability indic. & not appropriate for forward securities trans. ( J+ 068 )
Error when filling the market segments for loan &1 ( J+ 069 )
Error when filling the market segments for an account ( J+ 070 )
Error when filling the mrkt segments for a non-interest-bearing position ( J+ 071 )
Error occurred for loan &1 in company code &2 ( J+ 072 )
Error occurred for an account in company code &1 ( J+ 073 )
Error in non-interest-bearing position &1, company code &2 ( J+ 074 )
The last message refers to loan &1 ( J+ 075 )
The last message refers to an account in company code &1 ( J+ 076 )
The last message refers to the non-interest-bearing position &1 ( J+ 077 )
Error when selecting fixed cash flows ( J+ 078 )
The A/L indicator & is not suitable for fixed cash flows ( J+ 079 )
The last message relates to a transaction in company code & ( J+ 081 )
The error occurred in a transaction in company code & ( J+ 082 )
Error when filling the market segments for a transaction in co.code & ( J+ 083 )
Cash flow indicator & is not suitable for stocks ( J+ 084 )
Error during formatting for an account ( J+ 089 )
No assignments specific to the valuation rule were found ( J+ 090 )
Data inconsistencies in technical financial transaction type ( J+ 091 )
Error when filling the market segments for securities order &1 ( J+ 092 )
Error in securities order &1, company code &2 ( J+ 093 )
The last message refers to position object &1 ( J+ 094 )
Financial transaction data incomplete or inconsistent ( J+ 096 )
No flows exist for a stock ( J+ 097 )
Unable to identify a transaction requiring processing ( J+ 099 )
Messages referring to position object &1 ( J+ 106 )
Messages referring to security order &1 ( J+ 107 )
Messages referring to CoCd &2 Transaction &1 ( J+ 108 )
Messages referring to loan &1 ( J+ 109 )
Forward stock transactions are not included in gap analysis ( J+ 113 )
Asset/liability ind. & is not suitable for forward securities trans. ( J+ 114 )
No formatted data exists ( J+ 118 )
A/L indicator & not appropriate for non-interest-bearing positions ( J+ 119 )
Error while processing a non-interest-bearing position ( J+ 120 )
Error no. & while breaking down the interest flow for a FRA ( J+ 121 )
Warning: No data available that could be displayed ( J+ 122 )
Messages referring to account &3 in company code &1 ( J+ 123 )
Messages referring to non-interest-bearing position or variable trans. &1 ( J+ 124 )
Messages referring to transaction &3 in company code &1 ( J+ 125 )
No period blocks defined for relative due date scenarios ( J+ 129 )
Due date scenario &1 not found ( J+ 130 )
Error while processing a due date scenario ( J+ 131 )
Due date scenario &1 not found ( J+ 137 )
The relative settings for due date scenario &1 are missing ( J+ 138 )
The absolute settings for due date scenario &1 are missing ( J+ 139 )
No asset/liability indicator found for one transaction ( J+ 140 )
Messages referring to complex financial transaction &1 ( J+ 143 )
Messages referring to position &1 ( J+ 144 )
Error while analyzing the complex risk object ( J+ 148 )
No flows found for an account ( J+ 149 )
Unable to take a new number from number range &1 (code &2) ( J+ 151 )
Last number from number range & was assigned ( J+ 153 )
Evaluation results for ID & already exist in database ( J+ 156 )
Write-down rule &1 in ALM valuation type &2 is not complete ( J+ 163 )
Unable to assign a new number from number range &1 ( J+ 164 )
The results objects are incomplete ( J+ 165 )
The calculation basis for the interest flow on & is incomplete ( J+ 170 )
External destination not maintained ( J+ 204 )
The structure of the transaction for external valuation is incorrect ( J+ 205 )
No flows exist for financial transaction ( J+ 210 )
External gap analysis failed ( J+ 211 )
No scenario progressions found ( J+ 212 )
No valid scenario found for scenario progression &1 on &2 ( J+ 213 )
No rate exists for translating trans. crcy &1 to evaluation currency &2 ( J+ 214 )
Error during currency translation from &1 to &2 ( J+ 215 )
Error in transaction structure ( J+ 216 )
Error in simulated position ( J+ 217 )
Error during conversion of interest calculation method ( J+ 218 )
Error occurred when calculating accrued interest ( J+ 219 )
Error while formatting the input errors ( J+ 221 )
Due date scenario &1 not found ( J+ 222 )
Error while formatting the due date scenario &1 ( J+ 223 )
Gap results object with asset/liability indicator &1 found ( J+ 224 )
No period blocks found for relative due date scenario &1 ( J+ 225 )
Error occurred while creating maturity band &1 ( J+ 226 )
No relevant base portfolios found ( J+ 227 )
Error while determining parameters ( J+ 228 )
Error when due date scenario applied ( J+ 229 )
Error while adding due date scenario to transaction ( J+ 230 )
Error while generating simulated interest payments ( J+ 242 )
Error while converting interest calculation method ( J+ 243 )
No interest flows exist ( J+ 244 )
No header information found ( J+ 247 )
& cannot be analyzed yet ( J+ 249 )
A zero bond forward transaction has no purchase/sale flow ( J+ 250 )
Part of the relative interest revenue/expense cannot be determined ( J+ 301 )
No changes permitted (according to the system settings) - Display only ( J+ 402 )
Enter the target entry ( J+ 403 )
Error occurred while recording transport - display only ( J+ 405 )
An entry with the same key already exists ( J+ 407 )
Evaluation type entries were converted to the ALM valuation type ( J+ 415 )
There are no gap-specific entries for the evaluation type for conversion ( J+ 416 )
ALM valuation types already exist ( J+ 417 )
ALM valuation types successfully created from the evaluation types ( J+ 418 )
ALM valuation types already contain new entries ( J+ 419 )
This ALM valuation type is already assigned to an evaluation type ( J+ 421 )
Unable to determine the date in the liquidation scenario ( J+ 424 )
No interest rate found in liq. scen. for date &, yield curve &, scen. & ( J+ 425 )
No interest rate found in ut. scenario for date &, yield curve &, scen.& ( J+ 426 )
Unable to calculate the base day for period & - &, int.calculation mthd & ( J+ 427 )
The date values for maturity bands &/&/& were combined ( J+ 432 )
No flows selected ( J+ 433 )
Characteristic & does not belong to view & ( J- 002 )
View & not suitable for current report type. ( J- 003 )
Simplify your selection criteria ( J- 005 )
The results from evaluation &1 cannot be compared with &2 ( J- 006 )
Interface program is not suitable for the report type ( J- 007 )
Unable to calculate clean price for evaluations using the maturity band ( J- 008 )
Error when selecting base portfolios belonging to view & ( J- 013 )
Error when checking authorization for base portfolios in view & ( J- 014 )
No base portfolios match the selection criteria ( J- 015 )
No financial objects match the selection criteria ( J- 018 )
Error while selecting financial objects with characteristic values ( J- 020 )
Error during authorization check for financial objects ( J- 021 )
Error during assignment of aggregation numbers in fin. object selection ( J- 022 )
No financial objects match the selection criteria ( J- 023 )
Displayed data is incomplete due to missing authorizations ( J- 024 )
Selections for characteristics not in the view are ignored ( J- 025 )
Unable to value summarized data; enter a view ( J- 026 )
View & does not belong to the active analysis structure ( J- 027 )
Activate an analysis structure ( J- 028 )
No authorization for view &1, portfolio hier. &2 (authorization group) ( J- 031 )
No authorization for &1 &2 (authorization group) ( J- 032 )
Error when selecting financial objects by administration data ( J- 034 )
You used too many scenarios/shifts; differences could not be calculated ( J- 040 )
Enter at least one scenario ( J- 041 )
Enter at least one market data shift ( J- 042 )
Selection excludes actual transactions ( J- 048 )
Criteria that exclude data are not valid for transaction selection ( J- 049 )
Analysis structure & is not active ( J- 051 )
Unable to restrict log for summarized objects ( J- 055 )
Horizon & is before the evaluation date & ( J- 057 )
VaR Simulation: No elementary category was entered for VaR type & ( J- 060 )
Flow data is incomplete; there are too many currencies ( J- 101 )
Error while calculating the interest rate ( J- 102 )
Error while calculating the NPV for the cash flow ( J- 103 )
Future position with ID number & has already expired ( J- 106 )
Valuation of options is not possible; maintain option data ( J- 108 )
Valuation of options: Fixing date of underlying is after option expiry ( J- 117 )
Valuation of options is not possible; underlying cannot be determined ( J- 119 )
Valuation of aggregated stock transactions: initial index status: & ( J- 120 )
Valuation of option is not possible; see long text ( J- 122 )
Valuation of options is not possible; see long text ( J- 123 )
Valuation of options is not possible; NPV of caplet underlying is missing ( J- 124 )
Valuation of futures is not possible; error while reading stock index & ( J- 125 )
Valuation of options is not possible; error while reading stock index & ( J- 126 )
Valuation of options: Error when reading volatility of index & ( J- 127 )
Valuation of options: Error when reading volatility of ref. int. rate & ( J- 128 )
Error when reading volatility of security & with volatility type & ( J- 129 )
Error while converting Macauley duration to modified duration ( J- 130 )
Error while converting the scenario progression &V1& on &V2& ( J- 154 )
Currency of option &1 is different from the currency of strike &2 ( J- 161 )
Set the put/call indicator of the complex option ( J- 164 )
Enter the quotation type of the security ( J- 167 )
Interest rate fixing date is before evaluation date ( J- 179 )
Error while resolving historical formula reference records ( J- 181 )
Maintain expiration, settlement or last trade date in future master data ( J- 191 )
Unable to find class data for underlying & of the stock option ( J- 201 )
Unable to find class data for position object & ( J- 202 )
Unable to find index values for index & ( J- 204 )
Unable to find data for stock index & ( J- 205 )
Unable to find class data for underlying & of the stock index option ( J- 206 )
Unable to find class data for underlying & of the future option ( J- 207 )
Unable to calculate key date balance for general ledger account &1 ( J- 210 )
No G/L account found for non-int. bearing position &1 in company code &2 ( J- 211 )
No G/L accounts found for non-interest-bearing position &1 ( J- 212 )
Transaction is not a forward security transaction; check your entry ( J- 213 )
Cannot find any entries in the table for the balance types ( J- 214 )
Cannot read the valuation rule for an account ( J- 217 )
Non-interest-bearing position &1 has no unique currency ( J- 224 )
Financial transaction &2 does not exist in company code &1 ( J- 225 )
No exchange assigned to security &1 ( J- 233 )
Exchange &2 is not assigned to security &1 ( J- 234 )
Cannot include the characteristic compound (&1 and &2); see the long text ( J- 313 )
View & contains data; you cannot change the settings ( J- 314 )
Cannot change analysis structure; characteristics are assigned to view & ( J- 315 )
You do not have authorization for the values of characteristic & ( J- 317 )
Characteristic &: Too many single values for authorization check ( J- 318 )
Cannot check authorization; characteristic & has no value table ( J- 319 )
Assign items to position group & ( J- 324 )
Deletion is not permitted; dependent evaluation data exists;see long text ( J- 325 )
Unable to check authorization for &2; &1 is not unique; see long text ( J- 326 )
The dependency of field &1 on field &2 is not taken into account ( J- 328 )
Portfolio hierarchy &1 is unsuitable for cash management evaluation ( J- 330 )
Field catalog was regenerated ( J- 404 )
Text read modules were regenerated ( J- 405 )
Error while generating the text read modules ( J- 406 )
Initializing valuation rule for all objects ( J- 507 )
Copying valuation rule for the objects in analysis structure & ( J- 508 )
Cannot copy valuation rule; syntax error in generated program ( J- 509 )
Cannot copy valuation rule; erro while saving ( J- 510 )
Cannot determine the characteristics in analysis structure & ( J- 513 )
Entry & is incorrect; choose a product type ( J- 551 )
Cannot find the data record for the selected line ( J- 602 )
Cannot update the portfolio hierarchies; table is locked by another user ( J- 802 )
Cannot find the saved portfolio hierarchy definition; see long text ( J- 803 )
Unable to find the saved characteristic hierarchies ( J- 805 )
Cannot generate the portfolio hierarchies; table locked by another user ( J- 808 )
Processing of portfolio hierarchy & for view & terminated ( J- 811 )
No new base portfolios exist in view &; see long text ( J- 812 )
Unable to delete any portfolio hierarchies; table locked by another user ( J- 813 )
Cannot update portfolio hierarchy & for view &; see long text ( J- 846 )
Choose a subnode of the portfolio hierarchy ( J- 852 )
Unable to adjust portfolio hierarchies; table is locked by another user ( J- 855 )
Unable to find saved version of portfolio hierarchy & ( J- 857 )
Cannot delete the data; see the long text ( J- 860 )
Cannot include the characteristic compound (&1 and &2); see the long text ( J- 861 )
Data element of valuation rule converted to portfolio hier. structures ( J- 862 )
You are not authorized to process view &1, portfolio hierarchy &2 ( J- 863 )
You are not authorized to delete view &1, portfolio hierarchy &2 ( J- 864 )
You are not authorized to display all portfolio hierarchies; see long txt ( J- 865 )
Cannot generate the portfolio hierarchy; see the long text ( J- 866 )
View &1 portfolio hierarchy &2 locked by user &3 ( J- 875 )
Error while generating view &1, portfolio hierarchy &2; see the long text ( J- 876 )
Hierarchy &1 / &2: Maintain the sorting for characteristic &3 ( J- 878 )
Cannot change portfolio hierarchy &1/&2; see long text ( J- 880 )
Database error when generating view &1, portfolio hier. &2; see long text ( J- 881 )
Cannot select the transaction flows ( J- 900 )
Time unit & does not have the dimension time ( J0 002 )
No time dimension found in dimension table ( J0 003 )
Division caused by 0 ( J0 004 )
Please specify either a publication and edition or CAR number ( J0 008 )
Please specify a publication and edition or report grouping if required ( J0 009 )
Specify either a carrier route or a geographical unit ( J0 011 )
Specify a carrier route or a geographical unit ( J0 016 )
IVW exclusion indicator should not be selected in live IVW auditing run ( J0 027 )
Only quarters or months allowed as audit periods (please check) ( J0 028 )
Hierarchy type version & & is not valid throughout the entire quarter ( J0 030 )
Only active hierarchy version is valid in a live audit report run ( J0 032 )
Please always maintain both periods ( J0 034 )
Maintain either both publication periods or both delivery/return periods ( J0 035 )
The specified period is not yet finished ( J0 036 )
Please specify either a publication date or a delivery date ( J0 037 )
Please specify a payment method and a country key ( J0 039 )
Please specify at least one item type ( J0 040 )
No data found that matches the specified selection criteria ( J0 043 )
Only one publication date allowed for an issue-related audit report ( J0 044 )
In test phase: Indicator 'Report made' is not set at present ( J0 045 )
Please specify the publication when specifying the version ( J0 046 )
No authorization for standard analysis of publication with division & ( J0 047 )
Restriction for backdated delivery of issues only w/sel.by shipping per. ( J0 048 )
Backdated delivery of issues from shipping period may be ignored ( J0 049 )
No authorization for reporting with division & ( J0 050 )
You do not have authorization for audit reports for a publ.in division & ( J0 052 )
You do not have authorization for test audit report run with division & ( J0 053 )
Please check entry for 'Backdated delivery only from publication date' ( J0 054 )
Only viable orders can be evaluated for selections by carrier route ( J0 057 )
No geographical hierarchy variants found for geographical unit & ( J0 058 )
No geographical hierarchy variants found ( J0 059 )
Geographical unit & does not exist in hierarchy variant & ( J0 060 )
Geo.hierarchy variant & not found (please check your entry) ( J0 061 )
A geographical unit should always be entered with a geo.hierarchy variant ( J0 062 )
AR hierarchy & & is inconsistent ( J0 063 )

Length: 903165 Date: 20191209 Time: 160239

Count: 3544     sap01-206 ( 2549 ms ) This documentation is copyright by SAP AG.

Our Service

Looking for Support? Questions?

The

Consolut

Callback-Service

Leave us your contact details and we will call you back. Panels marked with * are mandatory.