Ansicht
Dokumentation
PFR2389 - :T ISDN alignment errors exceeded guideline of &2. ( OS/400 )
Addresses (Business Address Services) PERFORM Short ReferenceDiese Dokumentation steht unter dem Copyright der IBM.
Nachricht : PFR2389
:T ISDN alignment errors exceeded guideline of &2.
Nachrichtenlangtext :
Cause . . . . . : The number of loss of synchronization events has exceeded the threshold value given by the system. One of the following may have caused the problem:
-- The environment may be electrically noisy.
-- The ISDN line quality may be poor.
-- Contact problems with the ISDN cable connectors.
-- Improper termination of the ISDN cables.
-- The remote physical interface is failing.
Recovery . . . : Your physical line may or may not be operational. Refer to planning guides for information about electrical requirements and noise problem considerations. Check that the correct cable part number is installed. Check that the cable is securely connected to the appropriate receptacles and the cable is in good physical condition. Consult your local ISDN network provider to have the line tested to verify line quality. To reduce the frequency of reports, the FRAMEALIGN and THRESHOLD values in the network interface can be changed using the CHGNWIISDN command.
Technical description . . . . . . . . : The following table shows the NWI identifier, maximum rate of frame alignment errors (errors per 15 minutes), the number of intervals that had a frame alignment error rate above the guideline, and the date and time the maximum rate occurred.
:I PFX2103
:T PFX200405
A sufficient number of loss of synchronization events have occurred to cause the error counter to exceed the threshold limit. The loss of synchronization error counter is incremented each time an loss of synchronization or loss of activation is detected at the physical interface. An overflow of this counter value indicates a significant degradation in line quality.
Nachrichtendatei : QPFRMSGF
Bibliothek Nachrichtendatei : QPFR
SUBST_MERGE_LIST - merge external lists to one complete list with #if... logic for R3up CPI1466 during Backup
Diese Dokumentation steht unter dem Copyright der IBM.
Length: 3264 Date: 20240420 Time: 035439 sap01-206 ( 3 ms )