Kontakt

Ansicht
Dokumentation

ABENCDS_CLIENT_HANDLING - CDS CLIENT HANDLING

ABENCDS_CLIENT_HANDLING - CDS CLIENT HANDLING

PERFORM Short Reference   Fill RESBD Structure from EBP Component Structure  
This documentation is copyright by SAP AG.
SAP E-Book

ABAP CDS - Client Handling in CDS Views

For a CDS view in ABAP CDS, the CDS annotation @ClientHandling can be used to specify client handling.

Determining Client Dependency

The annotation @ClientHandling.type determines the client dependency of the view. The following values can be specified for the annotation:

#INHERITED

Default value. The client dependency of the view is determined by the data sources used.

  • If one of the data sources used in the view is client-specific, the view is client-specific.
  • If none of the data sources used in the view is client-specific, the view is a cross-client view.

#CLIENT_DEPENDENT

The view is client-specific. A prerequisite for this is that at least on of the data sources used in the view is client-specific. If not, a syntax error occurs.

#CLIENT_INDEPENDENT

The view is a cross-client view. A prerequisite for this is that none of the data sources used in the view is client-specific. If not, a syntax error occurs.

Notes

  • CDS views for application data should usually be client-specific.
  • Unlike the annotation @ClientDependent, the annotation @ClientHandling.type cannot be used to make a CDS view into a cross-client view if it contains client-specific data sources.
  • If the annotation @ClientHandling.type is not specified, client dependency is derived implicitly from the client dependency of the data sources uses, as when specified with the value #INHERITED.

Determining Client Handling

The annotation @ClientHandling.algorithm determines how implicit client handling is performed. The following values can be specified for the annotation:

#AUTOMATED

Default value for the values #INHERITED and #CLIENT_DEPENDENT of the annotation @ClientHandling.type. Cannot be used together with its value #CLIENT_INDEPENDENT.

The value #AUTOMATED expands the joins of the CDS view implicitly as shown in the following table. In the case of outer joins, cross-client sides are made into client-specific sides artificially using cross joins, which avoids NULL values. This applies to joins specified directly using JOIN and to instances of joins created when using CDS path expressions.

Left Side Right Side INNER JOIN LEFT OUTER JOIN RIGHT OUTER JOIN CROSS JOIN
Client-specific Client-specific Compares the client columns in the ON condition Compares the client columns in the ON condition Compares the client columns in the ON condition Transforms the cross join to an inner join using an ON condition for the client columns
Cross-client Client-specific - The left side is replaced by a cross join of the cross-client data source with the database table T000 and a comparison of the client columns in the ON condition. - -
Client-specific Cross-client - - The right side is replaced by a cross join of the cross-client data source with the database table T000 and the client columns are compared in the ON condition. -
Cross-client Cross-client - - - -

#SESSION_VARIABLE

Cannot be used together with the value #CLIENT_INDEPENDENT of the annotation @ClientHandling.type.

The value #SESSION_VARIABLE expands the joins of the CDS view implicitly as shown in the following table. This applies to joins specified explicitly and directly using JOIN and to instances of joins created when using CDS path expressions.

Left Side Right Side INNER JOIN LEFT OUTER JOIN RIGHT OUTER JOIN CROSS JOIN
Client-specific Client-specific Compares the client columns in the ON condition Compares the client columns in the ON condition Compares the client columns in the ON condition Transforms the cross join to an inner join using an ON condition for the client columns
Cross-client Client-specific - Compares the client column with the value of the session variable $session.client in the ON condition - -
Client-specific Cross-client - - Compares the client column with the value of the session variable $session.client in the ON condition -
Cross-client Cross-client - - - -

In addition, when client-specific data tables are accessed, WHERE clauses with comparisons of the client columns with the session variable $session.client are added to the view implicitly. If only client-specific CDS entities are accessed, however, no clauses are added.

If the session variable $session.client is evaluated in the view, it is not possible to access the data of different clients in a single read. This applies in the following cases:

  • When a client-specific database table is a data source of the view or is a CDS view used as a data source and hence an implicit WHERE clause exists for the session variable.
  • When client-specific and cross-client sides are joined in an outer join and there is an implicit ON condition for the session variable.

The addition CLIENT SPECIFIED of the statement SELECT is not allowed in this case. The addition USING CLIENT, on the other hand, is allowed and the client specified here is used implicitly.

#NONE

Default value for the value #CLIENT_INDEPENDENT of the annotation @ClientHandling.type. Cannot be used together with its values INHERITED and #CLIENT_DEPENDENT. No implicit client handling takes place.

Notes

  • The values #AUTOMATED and #SESSION_VARIABLE produce the same result when a client-specific CDS view is used. The modify the way client handling is implemented internally, but do not modify the definition of the view or its use (with the exception of CLIENT SPECIFIED). The value #SESSION_VARIABLE can improve performance by concentrating on a single client.
  • If a view with the value #INHERITED of the annotation @ClientHandling.type is a cross-client view, no implicit client handling takes place and the values #AUTOMATED and #SESSION_VARIABLE are ignored.
  • If no annotation @ClientHandling.type is specified, the annotation @ClientHandling.algorithm can be specified with the values #AUTOMATED or #SESSION_VARIABLE for the default value #INHERITED.
  • If an annotation @ClientHandling.type is specified but an annotation @ClientHandling.algorithm is not specified, the value #AUTOMATED is set in #INHERITED and #CLIENT_DEPENDENT implicitly and the value #NONE is set in #CLIENT_INDEPENDENT, also implicitly.
  • If none of the annotations is specified, the default values #INHERITED for @ClientHandling.type and #AUTOMATED for @ClientHandling.algorithm apply.
  • The value #NONE can only be specified for views declared explicitly as cross-client views. If specified for views declared explicitly as client-specific views using #CLIENT_DEPENDENT, self-programmed client handling would be required and this is not currently supported.
  • If the value #SESSION_VARIABLE is specified, the addition CLIENT SPECIFIED of the statement SELECT is forbidden only in cases where the session variable $session.client is actually in use in the view in question. More specifically, specifying a client-specific view in an association does not necessarily mean that the session variable is used. The session variable is used only if the association in the view is created with an implicit ON condition for the session variable.

Properties of Client-Specific CDS Views

In reads, the client dependency of a CDS view has the following consequences for the CDS entity and the associated CDS database view:

  • The view fields of the CDS entity of a client-specific CDS view do not cover a client column. A client column of a client-specific CDS view specified explicitly in the SELECT list is also not a component of the structured data type represented by the CDS entity and is removed implicitly from the results set of a SELECT statement.

  • If SELECT is used to access a client-specific CDS entity, the data of the current client or the client specified in the addition USING CLIENT is read implicitly. If the addition CLIENT SPECIFIED is specified, the column is added to the results set and is filled with the associated client ID for each row. Before this column can be used in the SELECT statement, a name must be assigned to it after the addition CLIENT SPECIFIED. If the name is not defined, no addressing is possible in a clause and no inline declarations can be made after INTO. The defined name is also used in the case of INTO CORRESPONDING. If no name is defined, the client column is not transported

  • The view fields of a CDS database view of a client-specific CDS view always cover a client column. This applies regardless of whether the client column is specified in the SELECT list.

  • In obsolete selects made on the CDS database view using SELECT, the view is handled in accordance with regular automatic client handling, where a client column is evaluated implicitly or explicitly using the addition CLIENT SPECIFIED.

  • The name of the client column of a CDS database view with activated client handling is defined in accordance with the following hierarchy: If the client column is specified in the SELECT list, its name or its alternative name is used. If the client column is not specified in the SELECT list, MANDT is used. If MANDT is already used as an (alternative) element name in the SELECT list, CLIENT is used. If neither MANDT or CLIENT is possible, a syntax error occurs.

Notes

  • Only the CDS database view can be accessed using Native SQL or in an AMDP method. When client-specific views are accessed, the client ID must be specified as usual and only data in the current client should be accessed.
  • The following must be noted when the CDS database view of a client-specific CDS view whose client handling is defined using the annotation @ClientHandling.algorithm:#SESSION_VARIABLE is accessed using Native SQL or AMDP:

  • No separate WHERE condition can be used that selects a client other than the session variable and the database-specific variant of the session variable $session.client must have the required value in Native SQL or AMDP reads. Outside an access, it contains the current client by default.

The last point is particularly important for client handling in general AMDP procedure implementations on the SAP HANA database, which are called like regular methods in ABAP. When a CDS database view like this is accessed, the value of the corresponding HANA session variable CDS_CLIENT must be set explicitly using the addition AMDP OPTIONS CDS SESSION CLIENT in the declaration of the AMDP method. If not, a syntax error occurs. In an AMDP function implementation that is used as a CDS table function in , however, the HANA session variable CDS_CLIENT is filled with the content defined there.

CDS Views, Client Handling






TXBHW - Original Tax Base Amount in Local Currency   ABAP Short Reference  
This documentation is copyright by SAP AG.

Length: 25749 Date: 20240423 Time: 201404     sap01-206 ( 278 ms )