Ansicht
Dokumentation

ABENCDS_F1_CAST_EXPRESSION - CDS F1 CAST EXPRESSION

rdisp/max_wprun_time - Maximum work process run time PERFORM Short Reference
This documentation is copyright by SAP AG.

- cast_expr

... CAST( operand AS dtype $[PRESERVING TYPE$]) ...

Effect

Casting in a SELECT statement of a CDS view. The cast expression converts the value of the operand operand to the ABAP Dictionary type specified by dtype. The result has the type dtype. The following can be specified for dtype:

A data element. In this case, the optional addition PRESERVING TYPE can be specified. If this addition is specified, the built-in data type, the length of the operand and the number of decimal places, and the target data type must match exactly.

A built-in data type in ABAP Dictionary. The addition PRESERVING TYPE cannot be specified in this case.

The following table shows the syntax for specifying built-in data types:

dtype	Dictionary Type
abap.char( len )	CHAR with length len
abap.clnt$[(3)$]	CLNT
abap.cuky$[(5)$]	CUKY
abap.curr(len,decimals)	CURR with length len and decimals decimal places
abap.decfloat16$[(16)$]	DECFLOAT16
abap.decfloat34$[(34)$]	DECFLOAT34
abap.dats$[(8)$]	DATS
abap.datn$[(8)$]	DATN
abap.dec(len,decimals)	DEC with length len and decimals decimal places
abap.fltp$[(16,16)$]	FLTP
abap.int1$[(3)$]	INT1
abap.int2$[(5)$]	INT2
abap.int4$[(10)$]	INT4
abap.int8$[(19)$]	INT8
abap.lang$[(1)$]	LANG
abap.numc( len )	NUMC with length len
abap.quan(len,decimals)	QUAN with length len with decimals decimal places
abap.raw(len)	RAW
abap.sstring(len)	SSTRING
abap.tims$[(6)$]	TIMS
abap.timn$[(6)$]	TIMN
abap.unit$[(2$\|3)$]	UNIT with length 2 or 3 (standard length)
abap.utclong$[(27)$]	UTCLONG

The actual length of the result is defined when the CDS view is activated and is at least as long as an explicitly defined length len. The predefined values can be specified for types with fixed lengths and decimal places, but this is not mandatory.

The following can be specified for operand:

A literal without a domain prefix

A parameter

A session variable

A field of a data source data_source of the current CDS view

An aggregate expression

A path expression that identifies a field of a data source data_source

A built-in function

An arithmetic expression

A case distinction with CASE

A nested cast expression

Cast expressions can be specified in the SELECT list and in operand positions of expressions.

The following table shows which combinations of built-in data types in ABAP Dictionary can currently be cast to each other and what the prerequisites are in each case. There is a special list of conversion rules for every combination.

from/to

INT1

INT2

INT4

INT8

DEC

CURR

QUAN

DECFLOAT16

DECFLOAT34

FLTP

CHAR

SSTRING

NUMC

DATS

TIMS

DATN

TIMN

UTCLONG

ACCP

CLNT

LANG

UNIT

CUKY

RAW

INT1

INT2

INT4

INT8

DEC

CURR

QUAN

DECFLOAT16

DECFLOAT34

FLTP

CHAR

SSTRING

NUMC

DATS

TIMS

DATN

TIMN

UTCLONG

ACCP

CLNT

LANG

UNIT

CUKY

RAW

There are no further restrictions to note in combinations with "x". The following rules apply to the other combinations:

In combinations with "y", the length of the target data type must be sufficient.

In combinations with "z", the lengths of the data types must match exactly.

In the case of combinations with "p" or "d", no built-in data type from ABAP Dictionary can be specified. A data element must be specified as the target data type instead.

In combinations with "d", the data element can have a suitable target type in accordance with the table above and with any length.

In combinations with "p", the data element must have the built-in data type and the same length as the data type of the operand.

In the case of incompatible types, the content of the operand is converted to the target type (exceptions can be raised if values are not suitable). In compatible types, a syntax check warning occurs (unless the target data type is specified as a data element using the addition PRESERVING TYPE).

Notes

If a data element is specified for dtype, the result of the expression is given its semantic attributes. An exception to this is the use of the CAST expression within a case distinction using CASE,

The addition PRESERVING TYPE can be used to perform a cast to data elements. This is done solely to modify the semantic attributes of the operand.

The characters in the surrogate area of the system code page UTF-16 are handled as two characters in cast expressions for strings. Care should be taken to avoid splitting these characters in cutoff operations.

When performing a conversion between currency fields with type CURR, it should be noted that CAST respects the decimal places defined for the type. In ABAP applications, on the other hand, the position of the decimal point is usually ignored.

A CAST expression should be platform-independent. Conversions from the type FLTP to other numeric types are not allowed because the result would be platform-dependent.

An aggregate expression AVG has the type FLTP by default. It can be specified as an operand but it is not possible to cast to other types. Therefore there is a separate addition for AVG AS dtype.

Special built-in conversion functions are available for special conversions that cannot be covered by a CAST expression:

FLTP_TO_DEC for converting FLTP to packed numbers.

BINTOHEX and HEXTOBIN for conversions of byte strings to character strings and back.

Conversion functions for units and currencies

The built-in numeric function CEIL can be used for conversions from DEC to INT4 that are not possible with a CAST expression, whereby it is usually necessary to adjust the result.

Example

Cast expressions in a SELECT list.

@AbapCatalog.sqlViewName: 'SALES_ORDER_VW'
define view sales_order as
  select from snwd_so
         association [1..*] to snwd_so_i as _item
           on snwd_so.node_key = _item.parent_key
         { key snwd_so.node_key,
               gross_amount as original_amount,
               cast(gross_amount as abap.fltp) +
                 (cast( -gross_amount as abap.fltp) * 0.03)
                   as reduced_amount,
               cast(gross_amount as abap.fltp) * 0.03
                 as overall_savings,
               _item.so_item_pos as item_position,
               _item.gross_amount as item_gross_amount,
               cast(_item.gross_amount as abap.fltp) * 0.97
                 as item_savings }

Example

In the following view, the column char1 of the DDIC database table DEMO_EXPRESSIONS is cast to the data element demo_char_text with the same technical attributes. In this case, it is advisable to specify the addition PRESERVING TYPE.

The following function module call returns the attributes of the view field. The text shows that the semantic attributes of the data element were applied. The column char1 does not have its own text.

DATA dfies_tab TYPE TABLE OF dfies.
CALL FUNCTION 'DDIF_FIELDINFO_GET'
  EXPORTING
    tabname   = 'DEMO_CDS_CAST_DE'
    fieldname = 'CHAR_WITH_TEXT'
    langu     = sy-langu
                TABLES
                dfies_tab = dfies_tab.
cl_demo_output=>display( dfies_tab[ 1 ]-fieldtext ).

Example

In the following view, a literal is given the technical and semantic attributes of the data element S_MANDT.

General Data in Customer Master BAL Application Log Documentation
This documentation is copyright by SAP AG.

Length: 42317 Date: 20240419 Time: 020452 sap01-206 ( 144 ms )

Ansicht Dokumentation

ABENCDS_F1_CAST_EXPRESSION - CDS F1 CAST EXPRESSION

- cast_expr

Effect

Notes

Example

Example

Example

Ansicht
Dokumentation