Ansicht
Dokumentation
09657 - AUTOREPLY Digest Number 846
General Material Data Vendor Master (General Section)This documentation is copyright by SAP AG.
AUTOREPLY Digest Number 846
Sehr geehrter Geschäftspartner,ich bin bis Montag 24.3.2003 ausser Haus.
Wenden Sie sich bitte in dringenden Fällen bis dahin an Hrn. Razesberger (Tel.
07242 413 151 oder trZteufelberger.com).
mfg
Nikolaus Seisl
Teufelberger GesmbH.
Vogelweiderstraße 50
A-4600 Wels, Austria
Tel.: ++43-7242-413-155
Fax : ++43-7242-413-60155
mailto:nsZteufelberger.com
http://www.teufelberger.com
Have a look to our homepage at: http://www.consolut.net
DoNotReply@consolut.eu
------------------------------------------------------------------------
There are 18 messages in this issue.
Topics in this digest:
1. AUTOREPLY Digest Number 845
From: <nsZteufelberger.com>
2. RE: IDES on iSeries
From: "Jim Doll" <jdollZperrigo.com>
3. Re: Mail over ISeries
From: "Jim Doll" <jdollZperrigo.com>
4. RE: Mail over ISeries
From: "Erik Huot" <ehuotZsouthshore-indltd.com>
5. Menu structur
From: thomas.kremminZseeber.de
6. Moving 4.0B systems
From: Robert Clay <zreclayZconsolut.net>
7. Operation Modes
From: Christine Kramlich <christinekZyorktwn.com>
8. Problems starting SAP after applying Kernel Patch 1444
From: Nilsa M Morales <moralenZus.ibm.com>
9. Re: Operation Modes
From: "Thomas Lindner" <Thomas.LindnerZunielektro.de>
10. RE: Problems starting SAP after applying Kernel Pa tch 1444
From: Andre Koji Honma <andre.honmaZfujifilm.com.br>
11. RE: Problems starting SAP after applying Kernel Pa tch 1444
From: Nilsa M Morales <moralenZus.ibm.com>
12. RE: Problems starting SAP after applying Kernel Pa tch 1444
From: "Jim Doll" <jdollZperrigo.com>
13. Re: Problems starting SAP after applying Kernel Patch 1444
From: "Gerhard K. Goebel" <gerd.goebelZbavarian-cons.com>
14. RE: Problems starting SAP after applying Kernel Pa tch 1444
From: Nilsa M Morales <moralenZus.ibm.com>
15. RE: Problems starting SAP after applying Kernel Pa tch 1444
From: "Jim Doll" <jdollZperrigo.com>
16. Virtual Optical Drive
From: "Jerry Cummins" <jcumminsZyorkgrp.com>
17. RE: Virtual Optical Drive
From: Andrew Tilbrook <tilbrookaZdairyfarmers.com.au>
18. Antwort: Moving 4.0B systems
From: thomas.kremminZseeber.de
________________________________________________________________________
________________________________________________________________________
Message: 1
Date: 18 Mar 2003 13:21:44 UT
From: <nsZteufelberger.com>
Subject: AUTOREPLY Digest Number 845
Sehr geehrter Geschäftspartner,
ich bin bis Montag 24.3.2003 ausser Haus.
Wenden Sie sich bitte in dringenden Fällen bis dahin an Hrn. Razesberger (Tel.
07242 413 151 oder trZteufelberger.com).
mfg
Nikolaus Seisl
Teufelberger GesmbH.
Vogelweiderstraße 50
A-4600 Wels, Austria
Tel.: ++43-7242-413-155
Fax : ++43-7242-413-60155
mailto:nsZteufelberger.com
http://www.teufelberger.com
Have a look to our homepage at: http://www.consolut.net
DoNotReply@consolut.eu
------------------------------------------------------------------------
There are 8 messages in this issue.
Topics in this digest:
1. AUTOREPLY Digest Number 844
From: <nsZteufelberger.com>
2. Re: 100mb ethernet 3 tier --> two tier
From: "bfbray" <blakebrayZpcmc.com>
3. APYJRNCHGX
From: "robert_ingrum" <ringrumZnexus-tek.com>
4. Question
From: "Martin Brieger" <Martin.BriegerZmbsoft.nu>
5. RE: IDES on iSeries
From: "Christian Otte" <cotteZveka.com>
6. RE: 100mb ethernet 3 tier --> two tier
From: alan.bowlingZnorthern-foods.co.uk
7. Mail over ISeries
From: Klaus.ZielinskiZedeka.de
8. Use of programs
From: "joseeduardobarrios" <ebarriosZccc.es>
________________________________________________________________________
________________________________________________________________________
Message: 1
Date: 17 Mar 2003 11:16:23 UT
From: <nsZteufelberger.com>
Subject: AUTOREPLY Digest Number 844
Sehr geehrter Geschäftspartner,
ich bin bis Montag 24.3.2003 ausser Haus.
Wenden Sie sich bitte in dringenden Fällen bis dahin an Hrn. Razesberger (Tel.
07242 413 151 oder trZteufelberger.com).
mfg
Nikolaus Seisl
Teufelberger GesmbH.
Vogelweiderstraße 50
A-4600 Wels, Austria
Tel.: ++43-7242-413-155
Fax : ++43-7242-413-60155
mailto:nsZteufelberger.com
http://www.teufelberger.com
Have a look to our homepage at: http://www.consolut.net
DoNotReply@consolut.eu
------------------------------------------------------------------------
There are 3 messages in this issue.
Topics in this digest:
1. AUTOREPLY Digest Number 843
From: <nsZteufelberger.com>
2. Re: Delete background jobs after QA refresh
From: "sapbasisguy" <craig_welchZbradycorp.com>
3. Re: Delete background jobs after QA refresh
From: "aj_ruth" <andreas.ruthZsap.com>
________________________________________________________________________
________________________________________________________________________
Message: 1
Date: 16 Mar 2003 11:29:45 UT
From: <nsZteufelberger.com>
Subject: AUTOREPLY Digest Number 843
Sehr geehrter Geschäftspartner,
ich bin bis Montag 24.3.2003 ausser Haus.
Wenden Sie sich bitte in dringenden Fällen bis dahin an Hrn. Razesberger (Tel.
07242 413 151 oder trZteufelberger.com).
mfg
Nikolaus Seisl
Teufelberger GesmbH.
Vogelweiderstraße 50
A-4600 Wels, Austria
Tel.: ++43-7242-413-155
Fax : ++43-7242-413-60155
mailto:nsZteufelberger.com
http://www.teufelberger.com
Have a look to our homepage at: http://www.consolut.net
DoNotReply@consolut.eu
------------------------------------------------------------------------
There are 5 messages in this issue.
Topics in this digest:
1. AUTOREPLY Digest Number 842
From: <nsZteufelberger.com>
2. Re: SAP commitment control problem
From: "sapbasisguy" <craig_welchZbradycorp.com>
3. SAP EDI ALE BAPI
From: "anjanbalgovind" <anjanbalgovindZconsolut.net>
4. Delete background jobs after QA refresh
From: "Gerhard K. Goebel" <gerd.goebelZbavarian-cons.com>
5. Re: SAP commitment control problem
From: "Lutz Eilert" <lutz.eilertZgmx.de>
________________________________________________________________________
________________________________________________________________________
Message: 1
Date: 15 Mar 2003 11:18:27 UT
From: <nsZteufelberger.com>
Subject: AUTOREPLY Digest Number 842
Sehr geehrter Geschäftspartner,
ich bin bis Montag 24.3.2003 ausser Haus.
Wenden Sie sich bitte in dringenden Fällen bis dahin an Hrn. Razesberger (Tel.
07242 413 151 oder trZteufelberger.com).
mfg
Nikolaus Seisl
Teufelberger GesmbH.
Vogelweiderstraße 50
A-4600 Wels, Austria
Tel.: ++43-7242-413-155
Fax : ++43-7242-413-60155
mailto:nsZteufelberger.com
http://www.teufelberger.com
Have a look to our homepage at: http://www.consolut.net
DoNotReply@consolut.eu
------------------------------------------------------------------------
There are 10 messages in this issue.
Topics in this digest:
1. Re: SAP DownLoad Manager from within intranet/The following exception
occurred: null
From: "cimpeva" <peter.vanavermaetZadvalvas.be>
2. RE: IDES on iSeries
From: "Gueldenpfennig, Volker" <volker.gueldenpfennigZsap.com>
3. Application server on V5R2 and central db on V5R1. It is possible?
From: "Joan Mir Rubio" <jmirZcamper.es>
4. RE: Application server on V5R2 and central db on V 5R1. It is possible?
From: "Gueldenpfennig, Volker" <volker.gueldenpfennigZsap.com>
5. RE: Background Jobs
From: "MCPARTLAND, Stan" <stanley.mcpartlandZbently.com>
6. 100mb ethernet 3 tier --> two tier
From: "stracenerp" <stracenerpZconsolut.net>
7. SAP R/3 and the other running a legacy system.
From: oluxardoZincakola.com.pe
8. RE: SAP R/3 and the other running a legacy system.
From: "Olson, Clyde" <clyde.olsonZsap.com>
9. RE: 100mb ethernet 3 tier --> two tier
From: "Olson, Clyde" <clyde.olsonZsap.com>
10. RE: SAP R/3 and the other running a legacy system.
From: oluxardoZincakola.com.pe
________________________________________________________________________
________________________________________________________________________
Message: 1
Date: Fri, 14 Mar 2003 12:24:05 -0000
From: "cimpeva" <peter.vanavermaetZadvalvas.be>
Subject: Re: SAP DownLoad Manager from within intranet/The following exception
occurred: null
I've found it.
The solution was:
in the SAP DLM config, check the check-box that says 'use tunnelling'.
________________________________________________________________________
________________________________________________________________________
Message: 2
Date: Fri, 14 Mar 2003 14:11:50 +0100
From: "Gueldenpfennig, Volker" <volker.gueldenpfennigZsap.com>
Subject: RE: IDES on iSeries
Hi Christian,
I just checked the web and found out, that currently AS/400 is again shown there
ias "not supported" whjich is an error.
I guess, you want to install 4.6C IDES ?
Then you can have a look to the attachments. Please let me know if I can help
you more (my last day today) soon.
Regards
Volker
-----Original Message-----
From: Christian Otte [mailto:cotteZveka.com]
Sent: Freitag, 14. März 2003 10:35
To: DoNotReply@consolut.eu
Subject: IDES on iSeries
Hello to all,
is there anybody, who had install IDES on an iSeries?
I got an installaton kit with the DB EXPORT CD on DVD (thanks, I have no DVD
at my iSeries), and the LABEL.ASC does not fit. And the documentation also
doesn't fit (there is only documentation for W2K and Unix available). So I
followed the instructions for Unix and I changed the conted of the LABEL..ASC
to
the expected string, but it doesn't run.
Any ideas ??
Mit freundlichen Grüssen/Yours sincerely
Christian Otte
TL ComputerCenter VEKA AG
Dieselstraße 8, D-48324 Sendenhorst
------------------------------------------------------
email: cotteZveka.com
office: +49-2526-296290
fax: +49-2526-29166290
mobil: +49-151-12115037
visit: http://www.veka.com
-------------------------------------------------------
Have a look to our homepage at: http://www.consolut.net
DoNotReply@consolut.eu
Your use of consolut is subject to http://www.consolut.net
----------
[CDSERVER46CSR2_IND_DB4ASCII]
1_LABEL=DB2/400:BASIS+WP+KW:46D:KERNEL:
1_LOCATION=/QOPT/CD51015620
1_NAME=KERNEL
2_LABEL=SAP:IDES:Edition-V3:DB-EXPORT:
2_LOCATION=/IDES/DB_EXPORT
2_NAME=EXPORT1
CDNUM=2
CLASS=CCDSupport
CONFIRMATION=1_LOCATION 2_LOCATION
LABEL=LABEL.ASC
MSGID=RI_GIST_CDSERVER_IND_IND
[CENTRDBINSTANCE_IND_DB4ASCII]
CIHOSTNAME=(RI_GIKY_NA_COM_CIHOSTNAME, entry { { label
RI_GIKY_NA_COM_CIHOSTNAME_LABEL } } )
CLASS=CCommonParameters
CONFIRMATION=SAPSYSTEMNAME SAPSYSNR CIHOSTNAME DBHOSTNAME KRNLIB KRNOSRELEASE
DBASP JRNRCVASP
DBASP=1
DBHOSTNAME=ZCIHOSTNAMEZ (RI_GIKY_NA_COM_DBHOSTNAME, entry { { label
RI_GIKY_NA_COM_DBHOSTNAME_LABEL } } )
INSTALLATIONTYPE=CI
JRNRCVASP=2
KRNLIB=R3ZSAP_RELEASEZOPT
KRNOSRELEASE=V4R5M0
MSGID=RI_GIST_CENTRALINSTANCE_IND_IND
SAPMOUNT=/sapmnt (RI_GIKY_NA_COM_SAPMNT, entry { { label
RI_GIKY_NA_COM_SAPMNT_LABEL } } )
SAPSYSNR=(RI_GIKY_NA_COM_SAPSYNR,entry { { label RI_GIKY_NA_COM_SAPSYNR_LABEL }
{ regexp ^([0-8][0-9])|(9[0-6])$ } } )
SAPSYSTEMNAME=C11 (RI_GIKY_NA_COM_SAPSYSTEMNAME,entry { { label
RI_GIKY_NA_COM_SAPSYSTEMNAME_LABEL } { regexp ^[A-Z][A-Z0-9][A-Z0-9]$ } } )
[CENTRDBSPACECHECK_IND_DB4ASCII]
CLASS=CFsSpaceCheck
LIST=Z_CENTRDBSPACECHECK_IND_DB4ASCII
MSGID=RI_GIST_CENTRDBSPACECHECK_IND_IND
PERFORM_ACTION=ZCHECK_FREESPACEZ
[CHECKEXPORTCDINCDROM_IND_IND]
CLASS=CCheckExportCd
MSGID=RI_GIST_CHECKEXPORTCDINCDROM_IND_IND
[CPYPTFFILE_IND_DB4ASCII]
CLASS=CCopyFiles
LIST=Z_COPYPTFFILE_IND_DB4
MSGID=RI_GIST_CPYPTFFILE_IND_IND
[CREATEJOURNAL_IND_DB4ASCII]
CLASS=Db4Journal
JOURNAL_OPTION=*CRT
MSGID=RI_GIST_CREATEJOURNAL_IND_IND
[CRTR3INST_IND_DB4ASCII]
CLASS=COS4Inst
MSGID=RI_GIST_CRTR3INST_IND_IND
[CRTR3SYS_IND_DB4ASCII]
CLASS=COS4System
MSGID=RI_GIST_CRTR3SYS_IND_IND
[DB4ASCIIINFO_IND_DB4ASCII]
CLASS=CCommonAsciiParms
CONFIRMATION=SAPCODEPAGE SECLANGLIB
LIST=Z_DBSORTTABLES_IND_DB4
MSGID=RI_GIST_CENTRALINSTANCE_IND_IND
SAPCODEPAGE=(RI_GIKY_NA_SAP_CODEPAGE)
SECLANGLIB=(RI_GIKY_NA_SECONDARY_LANGUAGE_LIBRARY)
[DB4CREATELOCALE_IND_DB4ASCII]
CLASS=Db4CreateLcl
LIST=Z_DBSORTTABLES_IND_DB4
MSGID=RI_GIST_DB4CREATELOCALE_IND_IND
[DB4CREATESORTTABLE_IND_DB4ASCII]
CLASS=Db4CreateSst
LIST=Z_DBSORTTABLES_IND_DB4
MSGID=RI_GIST_DB4CREATESORTTABLE_IND_IND
[DBCREATEDB_IND_DB4ASCII]
CLASS=Db4CreateDb
MSGID=RI_GIST_DBCREATEDB_IND_IND
[DBR3LICSTANDALONE_IND_DB4ASCII]
CLASS=CSlicInstall
EXECUTABLE=saplicense
MSGID=RI_GIST_DBR3LICENSECREATE_IND_IND
OPTIONS=-R3Setup ZSAPSYSTEMNAMEZ SLIC_INITIAL TRACE=2
PATH=ZSAPMOUNTEXEZ
RC_OK_CODE=0
RUN_AS_GROUP=ZSAPSYSTEMNAMEZOWNER
RUN_AS_USER=ZSAPSYSTEMNAMEZOFR
STEP_ENV=DB_ENV
[DBR3LOADCMD_IND_IND]
CLASS=CR3loadCmdFiles
DUMP_FILESIZE_IN_MB=2000
MSGID=RI_GIST_DBR3LOADCMD_IND_IND
R3LOAD_MODE=IMPORT
STEP_ENV=DB_ENV
[DBR3LOADDDICDUMMY_IND_DB4ASCII]
CLASS=CR3loadDummy
MSGID=RI_GIST_DBR3LOADDDICDUMMY_IND_IND
[DBR3LOADDDIC_IND_DB4ASCII]
CLASS=CR3loadPackage
MSGID=RI_GIST_DBR3LOADDDIC_IND_IND
R3LOAD_OPTION=-o J
STEP_ENV=DB_ENV
TABART=SAPSDIC
[DBR3LOADEXECDUMMY_IND_IND]
CLASS=CR3loadDummy
MSGID=RI_GIST_DBR3LOADEXECDUMMY_IND_IND
[DBR3LOADEXEC_IND_DB4ASCII]
CLASS=CR3loadExec
CONFIRMATION=PROCESSES
MSGID=RI_GIST_DBR3LOADEXEC_IND_IND
NEGATIVE_LIST=SAPSDIC.STR SAPVIEW.STR
PROCESSES=4 (RI_GIKY_NA_R3LOAD_PROCESSES,entry { { label "Number of parallel
processes" } { range 1 20 1 } })
R3LOAD_MODE=IMPORT
R3LOAD_OPTION=-o J
STEP_ENV=DB_ENV
[DBR3LOADVIEWDUMMY_IND_IND]
CLASS=CR3loadDummy
MSGID=RI_GIST_DBR3LOADVIEWDUMMY_IND_IND
[DBR3LOADVIEW_IND_DB4ASCII]
CLASS=CR3loadPackage
MSGID=RI_GIST_DBR3LOADVIEW_IND_IND
R3LOAD_MODE=IMPORT
R3LOAD_OPTION=-o J
STEP_ENV=DB_ENV
TABART=SAPVIEW
[DBR3START_IND_DB4ASCII]
CLASS=CExecute
EXECUTABLE=STARTSAP.CMD
MSGID=RI_GIST_DBR3START_IND_IND
OPTIONS=SID(ZSAPSYSTEMNAMEZ) INSTANCE(ZSAPSYSNRZ) DLTSPLF(*NO) PROFILE(*DFT)
WAIT(*YES)
PATH=/QSYS.LIB/ZKRNLIBZ.LIB
RC_OK_CODE=0
RUN_AS_GROUP=ZSAPSYSTEMNAMEZOWNER
RUN_AS_USER=ZSAPSYSTEMNAMEZOFR
STEP_ENV=DB_ENV
[DB_ENV]
DBMS_TYPE=#dbms_type#db4
DIR_LIBRARY=/usr/sap/ZCENTRDBINSTANCE_IND_DB4ASCII=SAPSYSTEMNAMEZ/SYS/exe/run
SAPDBHOST=ZCENTRDBINSTANCE_IND_DB4ASCII=DBHOSTNAMEZ
SAPSYSTEM=ZCENTRDBINSTANCE_IND_DB4ASCII=SAPSYSNRZ
SAPSYSTEMNAME=ZCENTRDBINSTANCE_IND_DB4ASCII=SAPSYSTEMNAMEZ
[DELETELOADS_IND_DB4ASCII]
CLASS=Db4ClearLoad
MSGID=RI_GIST_DELETELOADS_IND_IND
[DELETE_PACKAGE_IND_DB4ASCII]
CLASS=CExecute
EXECUTABLE=DLTR3PKG.CMD
MSGID=RI_GIST_DELETE_PACKAGE_IND_IND
OPTIONS=SID(ZSAPSYSTEMNAMEZ) PKGTYPE(*ALL)
PATH=/QSYS.LIB/ZKRNLIBZ.LIB
RC_OK_CODE=0
STEP_ENV=DB_ENV
[DIPGNTAB_IND_DB4ASCII]
CLASS=CExecute
EXECUTABLE=dipgntab
MSGID=RI_GIST_DIPGNTAB_IND_IND
OPTIONS=-fprot /tmp/dipgntabZSAPSYSTEMNAMEZ.log -rwr40 -srctt DDNTT -srctf DDNTF
-dsttt DDNTT -dsttf DDNTF -ttonly TT
PATH=ZSAPMOUNTEXEZ
RC_OK_CODE=0
RUN_AS_GROUP=ZSAPSYSTEMNAMEZOWNER
RUN_AS_USER=ZSAPSYSTEMNAMEZOFR
STEP_ENV=DB_ENV
[EXE]
10=CENTRDBINSTANCE_IND_DB4ASCII
20=DB4ASCIIINFO_IND_DB4ASCII
30=PTFCHK_IND_DB4ASCII
40=CENTRDBSPACECHECK_IND_DB4ASCII
50=CDSERVER46CSR2_IND_DB4ASCII
60=LODR3KRN_IND_DB4ASCII
70=CRTR3SYS_IND_DB4ASCII
80=CRTR3INST_IND_DB4ASCII
90=DB4CREATELOCALE_IND_DB4ASCII
100=CPYPTFFILE_IND_DB4ASCII
110=CHECKEXPORTCDINCDROM_IND_IND
120=R3LOADLINK_IND_DB4ASCII
130=DBCREATEDB_IND_DB4ASCII
140=DB4CREATESORTTABLE_IND_DB4ASCII
150=DBR3LOADCMD_IND_IND
160=DBR3LOADDDICDUMMY_IND_DB4ASCII
170=DBR3LOADDDIC_IND_DB4ASCII
180=DBR3LOADEXECDUMMY_IND_IND
190=DBR3LOADEXEC_IND_DB4ASCII
200=DBR3LOADVIEWDUMMY_IND_IND
210=DBR3LOADVIEW_IND_DB4ASCII
220=DELETELOADS_IND_DB4ASCII
230=CREATEJOURNAL_IND_DB4ASCII
240=STARTJOURNAL_IND_DB4ASCII
250=DBR3LICSTANDALONE_IND_DB4ASCII
260=DIPGNTAB_IND_DB4ASCII
270=DELETE_PACKAGE_IND_DB4ASCII
280=EXITMNLS_IND_IND
290=DBR3START_IND_DB4ASCII
300=RFCRSWBOINI_IND_IND
310=RFCRADDBDIF_IND_DB4ASCII
[EXITMNLS_IND_IND]
CLASS=CExitStep
EXIT=(RI_GIKY_NA_EXIT_MNLS,radiobox { { label "Exit installation to update MNLS
tables?" } { CONT "Continue installation" } { EXIT Exit } } )
MSGID=RI_GIST_EXITMNLS_IND_IND
[LODR3KRN_IND_DB4ASCII]
APYR3KRN=*NO
CLASS=COS4Kernel
DEV=*STMF
DLTSQLPKG=*NO
MSGID=RI_GIST_LODR3KRN_IND_IND
SAVF=
SAVFLIB=
SAVLIB=R3ZSAP_RELEASEZAOPT
STEP_CD=KERNEL
STMFDIR=Z1_LOCATIONZ/OS400/AS400/ZKRNOSRELEASEZ
[PTFCHK_IND_DB4ASCII]
CLASS=COS4PtfCheck
EXIT=(RI_GIKY_NA_DB4_EXIT_PTFCHK,radiobox { { label "Exit installation to update
PTF?" } { CONT "Continue installation" } { EXIT Exit } } )
MSGID=RI_GIST_PTFCHK_IND_IND
[R3LOADLINK_IND_DB4ASCII]
CLASS=CR3loadLink
MSGID=RI_GIST_R3LOADLINK_IND_IND
[RFCRADDBDIF_IND_DB4ASCII]
CLASS=CRfcJob
MSGID=RI_GIST_RFCRADDBDIF_IND_IND
RFCCHECKNUMBER=0
RFCCHECKTIME=300
RFCREPNAME=RADDBDIF
RFCSTEP=3
RFCTRACE=OFF
[RFCRSWBOINI_IND_IND]
CLASS=CRfcJob
MSGID=RI_GIST_RFCRSWBOINI_IND_IND
RFCDONTDO=I
RFCREPNAME=RSWBOINS
RFCSTEP=1
RFCTRACE=OFF
[STARTJOURNAL_IND_DB4ASCII]
CLASS=Db4FixFile
MSGID=RI_GIST_STARTJOURNAL_IND_IND
[Z_CENTRDBSPACECHECK_IND_DB4ASCII]
101_DIR_CHECK_PATH=/QSYS.LIB
101_FREE_SPACE_WANTED=24000
101_SPACE_CHECK_PATH=/QSYS.LIB
[Z_COPYPTFFILE_IND_DB4]
12_PATTERN=infoapar.*
12_SOURCEDIR=/tmp
12_TARGETDIR=/usr/sap/trans/config
13_PATTERN=INFOAPAR.*
13_SOURCEDIR=/tmp
13_TARGETDIR=/usr/sap/trans/config
[Z_DBSORTTABLES_IND_DB4]
10_A_CCSID=819
10_E_CCSID=500
10_SAPCODEPAGE=1100
10_SAPLOCALE=EN_US_ISO1
11_A_CCSID=1089
11_E_CCSID=420
11_SAPCODEPAGE=6
11_SAPLOCALE=AR_AA_ISO6
12_A_CCSID=912
12_E_CCSID=870
12_SAPCODEPAGE=1401
12_SAPLOCALE=CS_CZ_ISO2
13_A_CCSID=819
13_E_CCSID=500
13_SAPCODEPAGE=1100
13_SAPLOCALE=DA_DK_ISO1
14_A_CCSID=819
14_E_CCSID=500
14_SAPCODEPAGE=1100
14_SAPLOCALE=DE_DE_ISO1
15_A_CCSID=813
15_E_CCSID=875
15_SAPCODEPAGE=1700
15_SAPLOCALE=EL_GR_ISO7
16_A_CCSID=819
16_E_CCSID=500
16_SAPCODEPAGE=1100
16_SAPLOCALE=EN_GB_ISO1
17_A_CCSID=819
17_E_CCSID=500
17_SAPCODEPAGE=1100
17_SAPLOCALE=ES_ES_ISO1
18_A_CCSID=819
18_E_CCSID=500
18_SAPCODEPAGE=1100
18_SAPLOCALE=FI_FI_ISO1
19_A_CCSID=819
19_E_CCSID=500
19_SAPCODEPAGE=1100
19_SAPLOCALE=FR_FR_ISO1
20_A_CCSID=912
20_E_CCSID=870
20_SAPCODEPAGE=1401
20_SAPLOCALE=HR_HR_ISO2
21_A_CCSID=912
21_E_CCSID=870
21_SAPCODEPAGE=1401
21_SAPLOCALE=HU_HU_ISO2
22_A_CCSID=819
22_E_CCSID=500
22_SAPCODEPAGE=1100
22_SAPLOCALE=IS_IS_ISO1
23_A_CCSID=819
23_E_CCSID=500
23_SAPCODEPAGE=1100
23_SAPLOCALE=IT_IT_ISO1
24_A_CCSID=916
24_E_CCSID=424
24_SAPCODEPAGE=1800
24_SAPLOCALE=IW_IL_ISO8
25_A_CCSID=819
25_E_CCSID=500
25_SAPCODEPAGE=1100
25_SAPLOCALE=NL_NL_ISO1
26_A_CCSID=819
26_E_CCSID=500
26_SAPCODEPAGE=1100
26_SAPLOCALE=NO_NO_ISO1
27_A_CCSID=912
27_E_CCSID=870
27_SAPCODEPAGE=1401
27_SAPLOCALE=PL_PL_ISO2
28_A_CCSID=819
28_E_CCSID=500
28_SAPCODEPAGE=1100
28_SAPLOCALE=PT_PT_ISO1
29_A_CCSID=915
29_E_CCSID=1025
29_SAPCODEPAGE=1500
29_SAPLOCALE=RU_RU_ISO5
30_A_CCSID=912
30_E_CCSID=870
30_SAPCODEPAGE=1401
30_SAPLOCALE=SK_SK_ISO2
31_A_CCSID=912
31_E_CCSID=870
31_SAPCODEPAGE=1401
31_SAPLOCALE=SL_SI_ISO2
32_A_CCSID=819
32_E_CCSID=500
32_SAPCODEPAGE=1100
32_SAPLOCALE=SV_SE_ISO1
33_A_CCSID=9066
33_E_CCSID=9030
33_SAPCODEPAGE=8600
33_SAPLOCALE=TH_TH_TIS
34_A_CCSID=920
34_E_CCSID=1026
34_SAPCODEPAGE=1610
34_SAPLOCALE=TR_TR_ISO9
35_A_CCSID=943
35_E_CCSID=5035
35_SAPCODEPAGE=8000
35_SAPLOCALE=JA_JP_SJIS
36_A_CCSID=1363
36_E_CCSID=1364
36_SAPCODEPAGE=8500
36_SAPLOCALE=KO_KR_KSC
37_A_CCSID=1386
37_E_CCSID=1388
37_SAPCODEPAGE=8400
37_SAPLOCALE=ZH_CN_GB
38_A_CCSID=950
38_E_CCSID=937
38_SAPCODEPAGE=8300
38_SAPLOCALE=ZH_TW_BIG5
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Message: 3
Date: Fri, 14 Mar 2003 15:48:18 +0100
From: "Joan Mir Rubio" <jmirZcamper.es>
Subject: Application server on V5R2 and central db on V5R1. It is possible?
Hello group,
We need an application server for our SAP R3 45B, that it is on a 830
with V5R1. We are looking for a new 810, but it is available only for
V5R2. Can we install an application server on V5R2 if the central db is
on a V5R1 for 45B release?
Thank you,
Juan Mir
________________________________________________________________________
________________________________________________________________________
Message: 4
Date: Fri, 14 Mar 2003 15:58:01 +0100
From: "Gueldenpfennig, Volker" <volker.gueldenpfennigZsap.com>
Subject: RE: Application server on V5R2 and central db on V 5R1. It is possible?
no problem at all, if you upgrade to a v5r2 certified kernel patch on all
servers
regards
volker
-----Original Message-----
From: Joan Mir Rubio [mailto:jmirZcamper.es]
Sent: Freitag, 14. März 2003 15:48
To: DoNotReply@consolut.eu
Subject: Application server on V5R2 and central db on
V5R1. It is possible?
Hello group,
We need an application server for our SAP R3 45B, that it is on a 830
with V5R1. We are looking for a new 810, but it is available only for
V5R2. Can we install an application server on V5R2 if the central db is
on a V5R1 for 45B release?
Thank you,
Juan Mir
Have a look to our homepage at: http://www.consolut.net
DoNotReply@consolut.eu
Your use of consolut is subject to http://www.consolut.net
________________________________________________________________________
________________________________________________________________________
Message: 5
Date: Fri, 14 Mar 2003 07:33:10 -0800
From: "MCPARTLAND, Stan" <stanley.mcpartlandZbently.com>
Subject: RE: Background Jobs
Christine,
We have not yet set this up so I can't offer details, but I plan to use the
QNTC file system to solve the same problem. I expect ABAP to be able to
write directly to a directory on an NT server via OPEN DATASET, etc. once we
have QNTC operational. I assume that your application is using WS_DOWNLOAD
or DOWNLOAD to transfer the files. Both of these function modules rely on
the SAPgui to perform the transfer. That's why they won't run in
background.
Regards,
Stan
-----Original Message-----
From: Christine Kramlich [mailto:christinekZyorktwn.com]
Sent: Thursday, 13 March, 2003 1:22 PM
To: 'DoNotReply@consolut.eu'
Subject: Background Jobs
Hi Gang,
Our Payroll department needs to run several background jobs once a month
that pulls and reports on data dealing with Employee 401K Contributions. At
the end of the program, it should take this file and save it off to either a
local file on a PC or to a mapped network drive. When we run this program
in dialog it works successfully, but when we run it in background it fails
at the step of saving the data to a local file. Does anyone know if there
is anything that we can do to be able to run this program successfully in
the background?
Thanks,
Christine
Christine A. Kramlich
Yorktowne Inc., Red Lion
SAP Basis and AS/400 Administrator
Phone: 717-246-5387
________________________________________________________________________
________________________________________________________________________
Message: 6
Date: Fri, 14 Mar 2003 20:53:15 -0000
From: "stracenerp" <stracenerpZconsolut.net>
Subject: 100mb ethernet 3 tier --> two tier
Hi,
We are in the process of going from three tier --> two tier. We
currently have users and printing on three application servers.
Would there be, or has anyone experienced a bottleneck with the 100mb
ethernet card serving all users and all printing request in a two
tier environment? We have about 200 active users and a rather heavy
amount of printing.
Thanks,
Philip Stracener
________________________________________________________________________
________________________________________________________________________
Message: 7
Date: Fri, 14 Mar 2003 16:13:01 -0500
From: oluxardoZincakola.com.pe
Subject: SAP R/3 and the other running a legacy system.
Hi all.
We have two iSeries. One of them running SAP R/3 and the other running a
legacy system. We want to read files from this legacy system by means of
an ABAP program. We tried it using EXEC SQL over a DDM file but we
could not did it. We have already reviewed redbook SG24-4672-03 and all
examples are based on the same computer.
Is there any other way to perform it ? Considering that we have two
different computers.
Best regards and TIA
Orlando Luxardo Martinich
Soporte Técnico
Corp. José R. Lindley S.A.
Telf. 381-2000 Anexo 2410 Celular 900-9378 RPM 45913
e-mail OLuxardoZincakola.com.pe
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Message: 8
Date: Fri, 14 Mar 2003 22:45:58 +0100
From: "Olson, Clyde" <clyde.olsonZsap.com>
Subject: RE: SAP R/3 and the other running a legacy system.
Hello Orlando,
There is a table called DBCON. This is the key to your solution.
You add a row to the table dbcon with the following parameters
con_name = some name for example PRDSYS
DBMS = DB4
User = AS/400 user id (the user must exist on the target system)
Password = whatever (not interpreted)
CON_ENV = AS4_HOST=as0001;AS4_DB_LIBRARY=RMTLIB;AS4_CON_TYPE=SOCKETS;
where as0001 is the host name in the tcp/ip host name table
and RMTLIB is the name of the library that contains the table you want to
access
Then in your abap you would put something like this:
EXEC SQL. CONNECT TO PRDSYS ENDEXEC.
EXEC SQL. SET CONNECTION TO PRDSYS. ENDEXEC.
EXEC SQL.
SELECT MYFIELD FROM MYTABLE
ENDEXEC.
EXEC SQL. DISCONNECT PRDSYS ENDEXEC.
Or...
DATA con_name(30) VALUE 'PRDSYS'.
* Open the link to the database 'PRDSYS'
EXEC SQL.
CONNECT TO :con_name
ENDEXEC.
IF SY-SUBRC <> 0.
* Error handling
ENDIF.
* Execution of DB operations
EXEC SQL.
SELECT * FROM MYTABLE
ENDEXEC.
EXEC SQL.
UPDATE MYTABLE SET ... WHERE ...
ENDEXEC.
EXEC SQL.
COMMIT WORK
ENDEXEC.
* Reset to the standard R /3 link
EXEC SQL.
SET CONNECTION DEFAULT
ENDEXEC.
All of this changes a little if you are using an R/3 release prior to 4.6, but
you can look at note 146624 for other information.
Best regards,
Alan
-----Original Message-----
From: oluxardoZincakola.com.pe [mailto:oluxardoZincakola.com.pe]
Sent: Friday, March 14, 2003 3:13 PM
To: DoNotReply@consolut.eu
Subject: SAP R/3 and the other running a legacy system.
Hi all.
We have two iSeries. One of them running SAP R/3 and the other running a
legacy system. We want to read files from this legacy system by means of
an ABAP program. We tried it using EXEC SQL over a DDM file but we
could not did it. We have already reviewed redbook SG24-4672-03 and all
examples are based on the same computer.
Is there any other way to perform it ? Considering that we have two
different computers.
Best regards and TIA
Orlando Luxardo Martinich
Soporte Técnico
Corp. José R. Lindley S.A.
Telf. 381-2000 Anexo 2410 Celular 900-9378 RPM 45913
e-mail OLuxardoZincakola.com.pe
[Non-text portions of this message have been removed]
Have a look to our homepage at: http://www.consolut.net
DoNotReply@consolut.eu
Your use of consolut is subject to http://www.consolut.net
________________________________________________________________________
________________________________________________________________________
Message: 9
Date: Fri, 14 Mar 2003 22:47:29 +0100
From: "Olson, Clyde" <clyde.olsonZsap.com>
Subject: RE: 100mb ethernet 3 tier --> two tier
If the three app servers were sharing the 100mb ethernet before, I don't see why
you would experience a bottleneck.
-----Original Message-----
From: stracenerp [mailto:stracenerpZconsolut.net]
Sent: Friday, March 14, 2003 2:53 PM
To: DoNotReply@consolut.eu
Subject: 100mb ethernet 3 tier --> two tier
Hi,
We are in the process of going from three tier --> two tier. We
currently have users and printing on three application servers.
Would there be, or has anyone experienced a bottleneck with the 100mb
ethernet card serving all users and all printing request in a two
tier environment? We have about 200 active users and a rather heavy
amount of printing.
Thanks,
Philip Stracener
Have a look to our homepage at: http://www.consolut.net
DoNotReply@consolut.eu
Your use of consolut is subject to http://www.consolut.net
________________________________________________________________________
________________________________________________________________________
Message: 10
Date: Fri, 14 Mar 2003 16:45:36 -0500
From: oluxardoZincakola.com.pe
Subject: RE: SAP R/3 and the other running a legacy system.
thanks
Orlando Luxardo Martinich
Soporte Técnico
Corp. José R. Lindley S.A.
Telf. 381-2000 Anexo 2410 Celular 900-9378 RPM 45913
e-mail OLuxardoZincakola.com.pe
"Olson, Clyde" <clyde.olsonZsap.com>
14/03/2003 04:45 p.m.
Por favor, responda a
DoNotReply@consolut.eu
Para
"'DoNotReply@consolut.eu'" <DoNotReply@consolut.eu>
cc
Asunto
RE: SAP R/3 and the other running a legacy system.
Hello Orlando,
There is a table called DBCON. This is the key to your solution.
You add a row to the table dbcon with the following parameters
con_name = some name for example PRDSYS
DBMS = DB4
User = AS/400
user id (the user must exist on the target system)
Password = whatever (not
interpreted)
CON_ENV =
AS4_HOST=as0001;AS4_DB_LIBRARY=RMTLIB;AS4_CON_TYPE=SOCKETS;
where
as0001 is the host name in the tcp/ip host name table
and
RMTLIB is the name of the library that contains the table you want to
access
Then in your abap you would put something like this:
EXEC SQL. CONNECT TO PRDSYS ENDEXEC.
EXEC SQL. SET CONNECTION TO PRDSYS. ENDEXEC.
EXEC SQL.
SELECT MYFIELD FROM MYTABLE
ENDEXEC.
EXEC SQL. DISCONNECT PRDSYS ENDEXEC.
Or...
DATA con_name(30) VALUE 'PRDSYS'.
* Open the link to the database 'PRDSYS'
EXEC SQL.
CONNECT TO :con_name
ENDEXEC.
IF SY-SUBRC <> 0.
* Error handling
ENDIF.
* Execution of DB operations
EXEC SQL.
SELECT * FROM MYTABLE
ENDEXEC.
EXEC SQL.
UPDATE MYTABLE SET ... WHERE ...
ENDEXEC.
EXEC SQL.
COMMIT WORK
ENDEXEC.
* Reset to the standard R /3 link
EXEC SQL.
SET CONNECTION DEFAULT
ENDEXEC.
All of this changes a little if you are using an R/3 release prior to 4.6,
but you can look at note 146624 for other information.
Best regards,
Alan
-----Original Message-----
From: oluxardoZincakola.com.pe [mailto:oluxardoZincakola.com.pe]
Sent: Friday, March 14, 2003 3:13 PM
To: DoNotReply@consolut.eu
Subject: SAP R/3 and the other running a legacy system.
Hi all.
We have two iSeries. One of them running SAP R/3 and the other running a
legacy system. We want to read files from this legacy system by means of
an ABAP program. We tried it using EXEC SQL over a DDM file but we
could not did it. We have already reviewed redbook SG24-4672-03 and all
examples are based on the same computer.
Is there any other way to perform it ? Considering that we have two
different computers.
Best regards and TIA
Orlando Luxardo Martinich
Soporte Técnico
Corp. José R. Lindley S.A.
Telf. 381-2000 Anexo 2410 Celular 900-9378 RPM 45913
e-mail OLuxardoZincakola.com.pe
[Non-text portions of this message have been removed]
Have a look to our homepage at: http://www.consolut.net
DoNotReply@consolut.eu
Your use of consolut is subject to http://www.consolut.net
Have a look to our homepage at: http://www.consolut.net
DoNotReply@consolut.eu
Your use of consolut is subject to http://www.consolut.net
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Your use of consolut is subject to http://www.consolut.net
To: DoNotReply@consolut.eu
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Message: 2
Date: Sat, 15 Mar 2003 17:33:29 -0000
From: "sapbasisguy" <craig_welchZbradycorp.com>
Subject: Re: SAP commitment control problem
Did you find a solution for this? We are currently experiencing the
same problem with a different file in our R3BWPDATA database.
--- In DoNotReply@consolut.eu, Strini Mudaly <striniZy...>
wrote:
> Hi guys/gals,
>
> I have a problem in that I have an object in my BW
> data library (r3bwpdata) is in the status:
>
> "Uncommitted changes pending for file "/BIC0515" in
> library R3BWPDATA. FILE "/BIC0515" in R3BWPDATA not
> saved."
>
> I have IPL'd my production system but still get the
> same error.
>
> Has anyone had a problem of this type.
>
> Thanks,
> Strini
>
>
> =====
> Strini Mudaly
> Tel : 781 354 1312
>
> __________________________________________________
> Do you consolut?
> consolut Web Hosting - establish your business online
> http://webhosting.consolut.net
________________________________________________________________________
________________________________________________________________________
Message: 3
Date: Sat, 15 Mar 2003 18:51:42 -0000
From: "anjanbalgovind" <anjanbalgovindZconsolut.net>
Subject: SAP EDI ALE BAPI
Location: Somerset/Baskingridge, NJ
Client: Avaya
Positions: 20 slots
Start date: asap
Duration: 6 months
Position Description
SAP-ABAP Interfaces:
Experience in the analysis, design and construction of SAP data &
transactional interfaces. Should have knowledge of, and experience in
implementing SAP-EDI interfaces, SAP-ALE interfaces and BAPIs.
Knowledge and working experience of the WebMethods middleware product
would be a definite plus.
Experience developing interfaces for one or more of the following
Objects is a bonus:
a. Master data distribution - Customer master, Material master.
b. Purchase/Production Order.
c. ACH/Credit Card.
SAP-ABAP Data Conversion:
Experience in the design and construction of data conversion
routines. Analyze data objects dependencies, design data
structures for migration and develop/construct programs for
data migration. Should have experience in utilizing standard
SAP data migration tools and BAPIs. Working knowledge of PL/SQL
and experience with Oracle RDBMS is a plus.
Experience in the conversion of the following objects is a bonus:
a. Customer master.
b. Material master.
c. Pricing data.
d. Service/Warranty data.
________________________________________________________________________
________________________________________________________________________
Message: 4
Date: Sat, 15 Mar 2003 19:05:39 -0000
From: "Gerhard K. Goebel" <gerd.goebelZbavarian-cons.com>
Subject: Delete background jobs after QA refresh
Hi group,
I just was wondering how you delete all the scheduled jobs (from your
production system) after you did a QA refresh?
After I have a rather large number of scheduled jobs in our
production system I would want to delete all the user jobs (but keep
the clean-up and reorg jobs) prior to starting the SAP system to
avoid that some of them become active whilst I'm in the process of
deleting them.
Is there an "easy" way on OS level that I could use before I start
SAP? I could write a program if that would be needed.
How are you dealing with this issue when you do a refresh?
Thanks for you comments.
Gerd
________________________________________________________________________
________________________________________________________________________
Message: 5
Date: Sun, 16 Mar 2003 11:18:03 -0000
From: "Lutz Eilert" <lutz.eilertZgmx.de>
Subject: Re: SAP commitment control problem
Hi,
we use vision solutions and there was the same problem last week.
After IPL without starting SAP I had no problems to sent the file to
the target system.
Regards,
Lutz
--- In DoNotReply@consolut.eu, "sapbasisguy" <craig_welchZb...>
wrote:
> Did you find a solution for this? We are currently experiencing the
> same problem with a different file in our R3BWPDATA database.
>
>
> --- In DoNotReply@consolut.eu, Strini Mudaly <striniZy...>
> wrote:
> > Hi guys/gals,
> >
> > I have a problem in that I have an object in my BW
> > data library (r3bwpdata) is in the status:
> >
> > "Uncommitted changes pending for file "/BIC0515" in
> > library R3BWPDATA. FILE "/BIC0515" in R3BWPDATA not
> > saved."
> >
> > I have IPL'd my production system but still get the
> > same error.
> >
> > Has anyone had a problem of this type.
> >
> > Thanks,
> > Strini
> >
> >
> > =====
> > Strini Mudaly
> > Tel : 781 354 1312
> >
> > __________________________________________________
> > Do you consolut?
> > consolut Web Hosting - establish your business online
> > http://webhosting.consolut.net
________________________________________________________________________
________________________________________________________________________
Your use of consolut is subject to http://www.consolut.net
To: DoNotReply@consolut.eu
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Message: 2
Date: Sun, 16 Mar 2003 13:28:19 -0000
From: "sapbasisguy" <craig_welchZbradycorp.com>
Subject: Re: Delete background jobs after QA refresh
Hi Gerd,
I edit the profile on the 400 and set the parameter rdisp/wp_no_btc =
0 before starting the system. When I am done with deleting the batch
jobs. I set it back to the original number and stop and start the
system.
Alternately, you could go to rz10 and set the value just before
deleting the original system and then use rz10 to set it back after
importing the profiles of active servers.
Craig.
--- In DoNotReply@consolut.eu, "Gerhard K. Goebel"
<gerd.goebelZb...> wrote:
> Hi group,
>
> I just was wondering how you delete all the scheduled jobs (from
your
> production system) after you did a QA refresh?
>
> After I have a rather large number of scheduled jobs in our
> production system I would want to delete all the user jobs (but
keep
> the clean-up and reorg jobs) prior to starting the SAP system to
> avoid that some of them become active whilst I'm in the process of
> deleting them.
>
> Is there an "easy" way on OS level that I could use before I start
> SAP? I could write a program if that would be needed.
>
> How are you dealing with this issue when you do a refresh?
>
> Thanks for you comments.
>
> Gerd
________________________________________________________________________
________________________________________________________________________
Message: 3
Date: Mon, 17 Mar 2003 07:06:46 -0000
From: "aj_ruth" <andreas.ruthZsap.com>
Subject: Re: Delete background jobs after QA refresh
Hi Gerd,
run the report rsbtcdel (as you can read in the guide "Homogenious
Systemcopy", chapter 10 subsequent actions.
Regards
Andreas
--- In DoNotReply@consolut.eu, "Gerhard K. Goebel"
<gerd.goebelZb...> wrote:
> Hi group,
>
> I just was wondering how you delete all the scheduled jobs (from
your
> production system) after you did a QA refresh?
>
> After I have a rather large number of scheduled jobs in our
> production system I would want to delete all the user jobs (but
keep
> the clean-up and reorg jobs) prior to starting the SAP system to
> avoid that some of them become active whilst I'm in the process of
> deleting them.
>
> Is there an "easy" way on OS level that I could use before I start
> SAP? I could write a program if that would be needed.
>
> How are you dealing with this issue when you do a refresh?
>
> Thanks for you comments.
>
> Gerd
________________________________________________________________________
________________________________________________________________________
Your use of consolut is subject to http://www.consolut.net
To: DoNotReply@consolut.eu
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Message: 2
Date: Mon, 17 Mar 2003 16:42:19 -0000
From: "bfbray" <blakebrayZpcmc.com>
Subject: Re: 100mb ethernet 3 tier --> two tier
About 6 months ago we went from a 3-tier (2 SB1's and a 730) to a 2-
Tier server on a 840. We have not experienced any problems with
everything running on a single machine, no bottleknecks on the 100mb
network connection. We also do way to much printing but it hasn't
caused problems with the Network. We range from 400-600 active users.
--- In DoNotReply@consolut.eu, "stracenerp" <stracenerpZy...>
wrote:
> Hi,
>
> We are in the process of going from three tier --> two tier. We
> currently have users and printing on three application servers.
> Would there be, or has anyone experienced a bottleneck with the
100mb
> ethernet card serving all users and all printing request in a two
> tier environment? We have about 200 active users and a rather heavy
> amount of printing.
>
> Thanks,
>
> Philip Stracener
________________________________________________________________________
________________________________________________________________________
Message: 3
Date: Mon, 17 Mar 2003 19:22:23 -0000
From: "robert_ingrum" <ringrumZnexus-tek.com>
Subject: APYJRNCHGX
Hi again everyone!
I've been out of touch for awhile. Can anyone relate if they've been
using APYJRNCHGX, and what if any issues one should be aware of?
TIA!
Robert
________________________________________________________________________
________________________________________________________________________
Message: 4
Date: Mon, 17 Mar 2003 12:20:51 -0800
From: "Martin Brieger" <Martin.BriegerZmbsoft.nu>
Subject: Question
I came across an ad from Robert Half.
SD for AS/400....is anyone aware what company this is?
San Diego area.
Robert Half isn't exaclty responsive.
Thanks
Martin
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Message: 5
Date: Tue, 18 Mar 2003 07:24:53 +0100
From: "Christian Otte" <cotteZveka.com>
Subject: RE: IDES on iSeries
Jim, have a look at the inst-doc in the attachment. I followed the instrictions
very close. The only thing I did different to the instructions: I changed the
contend of the LABEL.ASC of /IDES/DB_EXPORT to the string written in
CIDB_IDC.R3S: SAP:IDES:Edition-V3:DB-EXPORT:
Mit freundlichen Grüssen/Yours sincerely
Christian Otte
TL ComputerCenter VEKA AG
Dieselstraße 8, D-48324 Sendenhorst
------------------------------------------------------
email: cotteZveka.com
office: +49-2526-296290
fax: +49-2526-29166290
mobil: +49-151-12115037
visit: http://www.veka.com
-------------------------------------------------------
----- Weitergeleitet von Christian Otte/DE00460/EDV_ORG/VEKA/DE am 18.03.2003
07:21 -----
|+-------------------------------+---------------------------------------------|
|| "Gueldenpfennig, Volker" | |
|| <volker.gueldenpfennigZsap.c| An: |
|| om> | "'DoNotReply@consolut.eu'" |
|| | <DoNotReply@consolut.eu> |
|| 14.03.2003 14:11 | Kopie: "'cotteZveka.com'" |
|| | <cotteZveka.com> |
|| | Thema: RE: |
|| | IDES on iSeries |
|+-------------------------------+---------------------------------------------|
Hi Christian,
I just checked the web and found out, that currently AS/400 is again shown there
ias "not supported" whjich is an error.
I guess, you want to install 4.6C IDES ?
Then you can have a look to the attachments. Please let me know if I can help
you more (my last day today) soon.
Regards
Volker
-----Original Message-----
From: Christian Otte [mailto:cotteZveka.com]
Sent: Freitag, 14. März 2003 10:35
To: DoNotReply@consolut.eu
Subject: IDES on iSeries
Hello to all,
is there anybody, who had install IDES on an iSeries?
I got an installaton kit with the DB EXPORT CD on DVD (thanks, I have no DVD
at my iSeries), and the LABEL.ASC does not fit. And the documentation also
doesn't fit (there is only documentation for W2K and Unix available). So I
followed the instructions for Unix and I changed the conted of the LABEL..ASC
to
the expected string, but it doesn't run.
Any ideas ??
Mit freundlichen Grüssen/Yours sincerely
Christian Otte
TL ComputerCenter VEKA AG
Dieselstraße 8, D-48324 Sendenhorst
------------------------------------------------------
email: cotteZveka.com
office: +49-2526-296290
fax: +49-2526-29166290
mobil: +49-151-12115037
visit: http://www.veka.com
-------------------------------------------------------
Have a look to our homepage at: http://www.consolut.net
DoNotReply@consolut.eu
Your use of consolut is subject to http://www.consolut.net
(See attached file: ides_inst.doc)
(See attached file: CIDB_IDS.R3S.txt)
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Message: 6
Date: Tue, 18 Mar 2003 08:26:54 -0000
From: alan.bowlingZnorthern-foods.co.uk
Subject: RE: 100mb ethernet 3 tier --> two tier
We went to two tier from three tier about a year ago but have recently had
to go to a three tier again. We run an 840 24 processor with two LPARs. On
one LPAR we have a 3.1i instance running and on the other a 4.6b instance.
We have around 1000 concurrent users and we recently saw the system freezing
for a minute or so at a time on the 3.1i system with all work processes
full, despite the I series running at only 25% CPU. This was checked out by
SAP and concluded that the system was saturated and that a limit had been
reached on the work processes (you can only have 68 in 3.1i in an instance)...
To get around this they created a virtual application server on the 840
which of course gave us the additional work processes. So even if you go
three tier there is an opportunity within the two tier to revert if there is
an issue. To my knowledge we haven't experienced any other issues related to
two tier.
Regards
Alan Bowling
SAP Competency Centre Manager
Northern Foods plc,
Raines House,
Denby Dale Road,
Wakefield,
West Yorkshire,
WF1 1HR
01924 202335 (Direct)
01924 202300 (Switchboard)
01924 202301 (Fax)
07710 039495 (Mobile)
Alan.BowlingZNorthern-Foods.co.uk
-----Original Message-----
From: stracenerp [mailto:stracenerpZconsolut.net]
Sent: Friday, March 14, 2003 8:53 PM
To: DoNotReply@consolut.eu
Subject: 100mb ethernet 3 tier --> two tier
Hi,
We are in the process of going from three tier --> two tier. We
currently have users and printing on three application servers.
Would there be, or has anyone experienced a bottleneck with the 100mb
ethernet card serving all users and all printing request in a two
tier environment? We have about 200 active users and a rather heavy
amount of printing.
Thanks,
Philip Stracener
Have a look to our homepage at: http://www.consolut.net
DoNotReply@consolut.eu
Your use of consolut is subject to http://www.consolut.net
**********************************************************************
The information included in this e-mail is of a confidential nature
and is intended only for the addressee. If you are not the intended
addressee, any disclosure, copying or distribution by you is
prohibited and may be unlawful. Disclosure to any party other than
the addressee, whether inadvertent or otherwise is not intended to
waive the privilege or confidentiality.
Although this e-mail and any attachments are believed to be free from
any virus, or other defect which might affect any system into which
they are received or opened, it is the responsibility of the recipient
to ensure that they are virus free and to check that they will not
adversely affect its systems and data. No responsibility is accepted
by Northern Foods PLC for any loss or damage arising in any way from
their receipt, opening or use.
**********************************************************************
________________________________________________________________________
________________________________________________________________________
Message: 7
Date: Tue, 18 Mar 2003 11:02:45 +0100
From: Klaus.ZielinskiZedeka.de
Subject: Mail over ISeries
Hello,
Has somebody produced a configuration for gone out Mails over SAP Connect ?
I have brought the programs of the ML-Savf from SAPNET into the
Kernel-Bibliothek. The RFC-Destination over program MLUNXSND also works.
But SCOT cannot dissolve the knot. I think the configuration on the ISeries
is not correct (Anymail?...). Who has done that already once?
Regards
Klaus Zielinski
================================================================
EDEKA Handelsgesellschaft Hessenring mbH
Industriegebiet Pfieffewiesen
34212 Melsungen
Tel.: 05661 / 72 - 358
Fax: 05661 / 72 - 77358
eMail: klaus.zielinskiZedeka.de
================================================================
________________________________________________________________________
________________________________________________________________________
Message: 8
Date: Tue, 18 Mar 2003 12:21:39 -0000
From: "joseeduardobarrios" <ebarriosZccc.es>
Subject: Use of programs
Hi all,
I need to know when was the last time , that one program, was used.
Can someone tell me how?.
Thanks.
Eduardo Barrios.
Cia. Cervecera de Canarias.
________________________________________________________________________
________________________________________________________________________
Your use of consolut is subject to http://www.consolut.net
To: DoNotReply@consolut.eu
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Message: 2
Date: Tue, 18 Mar 2003 08:25:25 -0500
From: "Jim Doll" <jdollZperrigo.com>
Subject: RE: IDES on iSeries
Thanks, Christian--that helps. I tried that earlier yesterday, but must have
mistyped it. I ended up changing the control file to match the LABEL.ASC and
that finally worked.
On to the next opportunity!
Jim Doll, Perrigo
>>> cotteZveka.com 03/18/03 01:24AM >>>
Jim, have a look at the inst-doc in the attachment. I followed the instrictions
very close. The only thing I did different to the instructions: I changed the
contend of the LABEL.ASC of /IDES/DB_EXPORT to the string written in
CIDB_IDC.R3S: SAP:IDES:Edition-V3:DB-EXPORT:
Mit freundlichen Grüssen/Yours sincerely
Christian Otte
TL ComputerCenter VEKA AG
Dieselstraße 8, D-48324 Sendenhorst
------------------------------------------------------
email: cotteZveka.com
office: +49-2526-296290
fax: +49-2526-29166290
mobil: +49-151-12115037
visit: http://www.veka.com
-------------------------------------------------------
----- Weitergeleitet von Christian Otte/DE00460/EDV_ORG/VEKA/DE am 18.03.2003
07:21 -----
|+-------------------------------+---------------------------------------------|
|| "Gueldenpfennig, Volker" | |
|| <volker.gueldenpfennigZsap.c| An: |
|| om> | "'DoNotReply@consolut.eu'" |
|| | <DoNotReply@consolut.eu> |
|| 14.03.2003 14:11 | Kopie: "'cotteZveka.com'" |
|| | <cotteZveka.com> |
|| | Thema: RE: |
|| | IDES on iSeries |
|+-------------------------------+---------------------------------------------|
Hi Christian,
I just checked the web and found out, that currently AS/400 is again shown there
ias "not supported" whjich is an error.
I guess, you want to install 4.6C IDES ?
Then you can have a look to the attachments. Please let me know if I can help
you more (my last day today) soon.
Regards
Volker
-----Original Message-----
From: Christian Otte [mailto:cotteZveka.com]
Sent: Freitag, 14. März 2003 10:35
To: DoNotReply@consolut.eu
Subject: IDES on iSeries
Hello to all,
is there anybody, who had install IDES on an iSeries?
I got an installaton kit with the DB EXPORT CD on DVD (thanks, I have no DVD
at my iSeries), and the LABEL.ASC does not fit. And the documentation also
doesn't fit (there is only documentation for W2K and Unix available). So I
followed the instructions for Unix and I changed the conted of the LABEL.ASC to
the expected string, but it doesn't run.
Any ideas ??
Mit freundlichen Grüssen/Yours sincerely
Christian Otte
TL ComputerCenter VEKA AG
Dieselstraße 8, D-48324 Sendenhorst
------------------------------------------------------
email: cotteZveka.com
office: +49-2526-296290
fax: +49-2526-29166290
mobil: +49-151-12115037
visit: http://www.veka.com
-------------------------------------------------------
Have a look to our homepage at: http://www.consolut.net
DoNotReply@consolut.eu
Your use of consolut is subject to http://www.consolut.net
(See attached file: ides_inst.doc)
(See attached file: CIDB_IDS.R3S.txt)
[Non-text portions of this message have been removed]
Have a look to our homepage at: http://www.consolut.net
DoNotReply@consolut.eu
Your use of consolut is subject to http://www.consolut.net
________________________________________________________________________
________________________________________________________________________
Message: 3
Date: Tue, 18 Mar 2003 08:30:26 -0500
From: "Jim Doll" <jdollZperrigo.com>
Subject: Re: Mail over ISeries
Klaus: attached are some notes that we used--I hope that they'll be helpful to
you.
Jim Doll, Perrigo
>>> Klaus.ZielinskiZedeka.de 03/18/03 05:02AM >>>
Hello,
Has somebody produced a configuration for gone out Mails over SAP Connect ?
I have brought the programs of the ML-Savf from SAPNET into the
Kernel-Bibliothek. The RFC-Destination over program MLUNXSND also works.
But SCOT cannot dissolve the knot. I think the configuration on the ISeries
is not correct (Anymail?...). Who has done that already once?
Regards
Klaus Zielinski
================================================================
EDEKA Handelsgesellschaft Hessenring mbH
Industriegebiet Pfieffewiesen
34212 Melsungen
Tel.: 05661 / 72 - 358
Fax: 05661 / 72 - 77358
eMail: klaus.zielinskiZedeka.de
================================================================
Have a look to our homepage at: http://www.consolut.net
DoNotReply@consolut.eu
Your use of consolut is subject to http://www.consolut.net
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Message: 4
Date: Tue, 18 Mar 2003 08:50:38 -0500
From: "Erik Huot" <ehuotZsouthshore-indltd.com>
Subject: RE: Mail over ISeries
I attached a document explaining the way I set this up.
Hope this helps,
Erik Huot
South Shore Industries Ltd.
-----Message d'origine-----
De : Klaus.ZielinskiZedeka.de [mailto:Klaus.ZielinskiZedeka.de]
Envoye : 18 mars, 2003 05:03
A : DoNotReply@consolut.eu
Objet : Mail over ISeries
Hello,
Has somebody produced a configuration for gone out Mails over SAP Connect ?
I have brought the programs of the ML-Savf from SAPNET into the
Kernel-Bibliothek. The RFC-Destination over program MLUNXSND also works.
But SCOT cannot dissolve the knot. I think the configuration on the ISeries
is not correct (Anymail?...). Who has done that already once?
Regards
Klaus Zielinski
================================================================
EDEKA Handelsgesellschaft Hessenring mbH
Industriegebiet Pfieffewiesen
34212 Melsungen
Tel.: 05661 / 72 - 358
Fax: 05661 / 72 - 77358
eMail: klaus.zielinskiZedeka.de
================================================================
Have a look to our homepage at: http://www.consolut.net
DoNotReply@consolut.eu
Your use of consolut is subject to http://www.consolut.net
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Message: 5
Date: Tue, 18 Mar 2003 15:02:40 +0100
From: thomas.kremminZseeber.de
Subject: Menu structur
Hi all,
is there a transaktion or an external tool to show the transaction as
organised in the SAP .- menu tree, or to download this in an excel sheet ?
Perhaps it helps to know the name of the table where the menuitems are in.
regardes
Thomas
________________________________________________________________________
________________________________________________________________________
Message: 6
Date: Tue, 18 Mar 2003 07:06:09 -0800 (PST)
From: Robert Clay <zreclayZconsolut.net>
Subject: Moving 4.0B systems
We are running SAP 4.0B, kernel patch 958 on iSeries V5R1. We have our
production (PRD) instance on one machine and our development (TST) and test
(QAS) instance on another.
When we first implemented SAP, we had all three instances on the PRD machine.
DASD usage was an issue at the time and a decision was made to move TST and QAS
to the other machine. We had consultants that performed this move..
We are preparing for an upgrade to the latest version of SAP. We only use FI
and CO.
Now, the time has come for the TST and QAS instances to move back to the PRD
machine. I feel certain that I can do this but I want to have an action plan
before I start.
My question concerns whether to treat the movement of the TST and QAS instances
as if they were copies or as if they were new installs (and yes, I remember the
license keys issue). Since we are at 4.0B, the installation CD and the
Installation guide are very dated. In fact, we are now using the 40B_COM kernel
and I do not know how that will impact the process.
Basically, I could either use the LODRUN command and cancel at the appropriate
point and restore the saved R3TSTDATA library from there, just like a refresh,
***OR***
I could use the CREATE COLLECTION R3<sid>DATA command and just restore the data
library and the kernel library and treat it as a restore, handling the IFS
connectivity and TMS rebuild manually.
Since PRD is already on the machine, couldn't I simply use ADDR3SYS command and
avoid all the drama associated wth the ancient CD and LODRUN?
If anyone has been through a similar situation, any advice and/or insight would
be greatly appreciated.
Robert Clay
Opinions expressed are my own and not necessarily those of my employer.
---------------------------------
Do you consolut?
consolut Platinum - Watch CBS' NCAA March Madness, live on your desktop!
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Message: 7
Date: Tue, 18 Mar 2003 11:01:06 -0500
From: Christine Kramlich <christinekZyorktwn.com>
Subject: Operation Modes
Hi Gang,
Does anyone know if it is possible to set up Operation Modes using days of
weeks as the criteria instead of time of day? Currently my operation mode
is set up as Day (7AM-12AM) and Night (12AM-7AM) and during the night mode I
take away two dialog processes and change them over to background processes..
What I would like to do is have a Monday through Friday Operation Mode, and
then have a Saturday - Sunday Operation Mode where I would take 10 dialog
processes and change them over to background processes. Thanks for the
input!!
Regards,
Christine
Christine A. Kramlich
Yorktowne Inc., Red Lion
SAP Basis and AS/400 Administrator
Phone: 717-246-5387
________________________________________________________________________
________________________________________________________________________
Message: 8
Date: Tue, 18 Mar 2003 11:20:33 -0500
From: Nilsa M Morales <moralenZus.ibm.com>
Subject: Problems starting SAP after applying Kernel Patch 1444
Hello Team,
We just performed a brand new install of SAP 4.6C SR2 on an iSeries 825
with V5R2M0. The install was successful.
We then applied the patch PRDASCRTPT (as it is a pre-req to the latest 4.6D
kernel patch of DW_1444) then applied the latest Kernel patch, namely Patch
Level 1444 ... now the SAP system will not start. We are getting a
"Program Signature Violation" error on STRSAP. Details of error state "The
source program STRSAP specifies signature
X'2EF464AF1D2399B8FC8B6ED971D4A76C' which is not supported by service
program OPRTLIB".
We then applied the patch for STRSAP, same results. We restored back to
the "installed" kernel (patch level 797), SAP comes up without error.
We've tried applying ALL Kernel patches, same results. SAP will not come
up, errors on STRSAP.
Incidentally, after each scenario of patch applies above, we ran a
FIXR3OWNS and APYR3KRN (just to play it safe) ... doesn't help!!
Add'lly, per the SAP on System i HomePage, it states:
"Certification of V5R2 for SAP on iSeries
SAP certified the V5R2 with all the PTFs of
the current Infoapar for V5R2. As not all of these PTFs are approved yet,
you would have to ask IBM for getting a few of these PTFs
manually via ECS.
(May be not approved PTFs: SI05925, SI05795,
SI04904, MF29517, MF29422)
SAP currently creates the necessary
Kernel-Patches for all releases in order to get rid of the SICK error
message. But fortunately there is nothing really functional in it. So, with
all these PTFs an SAP system should run fine on V5R2"
We are getting errors in SICK stating "V5R2M0 is not compatible with 46D of
Kernel" ... per the above, it seems as long as we have all OS PTFs for
V5R2M0 applied (which we do), we should be fine to continue building our
SAP system (i.e. run client copy, load PCC, load Accel HR, apply SPs etc.)
... is this true?
I thought I remembered others having problems with Kernel Patch level 1444
however I cannot find anything in my SAP on System i Archives. Has anyone
applied Kernel Patch 1444 successfully or unsuccessfully?
We've opened OSS msg 99336 however we have not rec'd a response as of yet
therefore any help that anyone could provide would be greatly appreciated.
Thank you,
Nilsa
Nilsa M. Morales
SAP Basis Consultant
ERP IT Infrastructure
IBM Business Consulting Services
vm: 404.487.2296 t/l: 546.2296
email: moralenZus.ibm.com
Client Info:
Kawasaki Rail Car, Inc.
Yonkers, NY
Tel: 914.376.4700 exts. 1216, 1217, 1218
________________________________________________________________________
________________________________________________________________________
Message: 9
Date: Tue, 18 Mar 2003 16:30:57 -0000
From: "Thomas Lindner" <Thomas.LindnerZunielektro.de>
Subject: Re: Operation Modes
Hi Christine,
u can create another operation-mode like 'Weekend' or so.
set your WP's u need. Save that definitions.
In Timetable settings (Exception operation) u define the days
with the new operation mode.
That's all
Thomas Lindner
UNIELEKTRO GmbH
Informationssysteme
Eschborn Germany
--- In DoNotReply@consolut.eu, Christine Kramlich
<christinekZy...> wrote:
> Hi Gang,
>
> Does anyone know if it is possible to set up Operation Modes using
days of
> weeks as the criteria instead of time of day? Currently my
operation mode
> is set up as Day (7AM-12AM) and Night (12AM-7AM) and during the
night mode I
> take away two dialog processes and change them over to background
processes.
> What I would like to do is have a Monday through Friday Operation
Mode, and
> then have a Saturday - Sunday Operation Mode where I would take 10
dialog
> processes and change them over to background processes. Thanks
for the
> input!!
>
> Regards,
> Christine
>
> Christine A. Kramlich
> Yorktowne Inc., Red Lion
> SAP Basis and AS/400 Administrator
> Phone: 717-246-5387
________________________________________________________________________
________________________________________________________________________
Message: 10
Date: Tue, 18 Mar 2003 15:24:42 -0300
From: Andre Koji Honma <andre.honmaZfujifilm.com.br>
Subject: RE: Problems starting SAP after applying Kernel Pa tch 1444
Hello Nilsa,
Have you tried deleting sql packs? Try run command DLTR3PKG SID(<SID>)
PKGTYPE(*ALL) at OS/400.
Kind Regards,
Andre
-----Original Message-----
From: Nilsa M Morales [mailto:moralenZus.ibm.com]
Sent: terça-feira, 18 de março de 2003 13:21
To: DoNotReply@consolut.eu
Subject: Problems starting SAP after applying Kernel Patch
1444
Hello Team,
We just performed a brand new install of SAP 4.6C SR2 on an iSeries 825
with V5R2M0. The install was successful.
We then applied the patch PRDASCRTPT (as it is a pre-req to the latest 4.6D
kernel patch of DW_1444) then applied the latest Kernel patch, namely Patch
Level 1444 ... now the SAP system will not start. We are getting a
"Program Signature Violation" error on STRSAP. Details of error state "The
source program STRSAP specifies signature
X'2EF464AF1D2399B8FC8B6ED971D4A76C' which is not supported by service
program OPRTLIB".
We then applied the patch for STRSAP, same results. We restored back to
the "installed" kernel (patch level 797), SAP comes up without error.
We've tried applying ALL Kernel patches, same results. SAP will not come
up, errors on STRSAP.
Incidentally, after each scenario of patch applies above, we ran a
FIXR3OWNS and APYR3KRN (just to play it safe) ... doesn't help!!
Add'lly, per the SAP on System i HomePage, it states:
"Certification of V5R2 for SAP on iSeries
SAP certified the V5R2 with all the PTFs of
the current Infoapar for V5R2. As not all of these PTFs are approved yet,
you would have to ask IBM for getting a few of these PTFs
manually via ECS.
(May be not approved PTFs: SI05925, SI05795,
SI04904, MF29517, MF29422)
SAP currently creates the necessary
Kernel-Patches for all releases in order to get rid of the SICK error
message. But fortunately there is nothing really functional in it. So, with
all these PTFs an SAP system should run fine on V5R2"
We are getting errors in SICK stating "V5R2M0 is not compatible with 46D of
Kernel" ... per the above, it seems as long as we have all OS PTFs for
V5R2M0 applied (which we do), we should be fine to continue building our
SAP system (i.e. run client copy, load PCC, load Accel HR, apply SPs etc.)
... is this true?
I thought I remembered others having problems with Kernel Patch level 1444
however I cannot find anything in my SAP on System i Archives. Has anyone
applied Kernel Patch 1444 successfully or unsuccessfully?
We've opened OSS msg 99336 however we have not rec'd a response as of yet
therefore any help that anyone could provide would be greatly appreciated.
Thank you,
Nilsa
Nilsa M. Morales
SAP Basis Consultant
ERP IT Infrastructure
IBM Business Consulting Services
vm: 404.487.2296 t/l: 546.2296
email: moralenZus.ibm.com
Client Info:
Kawasaki Rail Car, Inc.
Yonkers, NY
Tel: 914.376.4700 exts. 1216, 1217, 1218
consolut Sponsor
<http://rd.consolut.net/M=245454.2994396.4323964.2848452/D=egroupweb/S=17050073
89:HM/A=1457554/R=0/*http://ipunda.com/clk/beibunmaisuiyuiwabei>
<http://us.adserver.consolut.net/l?M=245454.2994396.4323964.2848452/D=egroupmai
l/S=:HM/A=1457554/rand=355401454>
Have a look to our homepage at: http://www.consolut.net
<http://www.consolut.net>
DoNotReply@consolut.eu
Your use of consolut is subject to the consolut Terms of Service
<http://www.consolut.net> .
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Message: 11
Date: Tue, 18 Mar 2003 13:34:20 -0500
From: Nilsa M Morales <moralenZus.ibm.com>
Subject: RE: Problems starting SAP after applying Kernel Pa tch 1444
Yes, we've tried that also .... several times!! We've even gone in and
verified all SQL package libraries were truly empty!!
Nilsa M. Morales
SAP Basis Consultant
ERP IT Infrastructure
IBM Business Consulting Services
vm: 404.487.2296 t/l: 546.2296
email: moralenZus.ibm.com
Client Info:
Kawasaki Rail Car, Inc.
Yonkers, NY
Tel: 914.376.4700 exts. 1216, 1217, 1218
|---------+----------------------------->
| | Andre Koji Honma |
| | <andre.honmaZfujif|
| | ilm.com.br> |
| | |
| | 03/18/2003 05:24 |
| | PM |
| | Please respond to |
| | SAP on System i |
| | |
|---------+----------------------------->
>-------------------------------------------------------------------------------\
--------------------------------------------------------------|
|
|
| To: "'DoNotReply@consolut.eu'"
<DoNotReply@consolut.eu>
|
| cc:
|
| Subject: RE: Problems starting SAP after applying
Kernel Pa tch 1444 |
|
|
>-------------------------------------------------------------------------------\
--------------------------------------------------------------|
Hello Nilsa,
Have you tried deleting sql packs? Try run command DLTR3PKG SID(<SID>)
PKGTYPE(*ALL) at OS/400.
Kind Regards,
Andre
-----Original Message-----
From: Nilsa M Morales [mailto:moralenZus.ibm.com]
Sent: terça-feira, 18 de março de 2003 13:21
To: DoNotReply@consolut.eu
Subject: Problems starting SAP after applying Kernel Patch
1444
Hello Team,
We just performed a brand new install of SAP 4.6C SR2 on an iSeries 825
with V5R2M0. The install was successful.
We then applied the patch PRDASCRTPT (as it is a pre-req to the latest 4.6D
kernel patch of DW_1444) then applied the latest Kernel patch, namely Patch
Level 1444 ... now the SAP system will not start. We are getting a
"Program Signature Violation" error on STRSAP. Details of error state "The
source program STRSAP specifies signature
X'2EF464AF1D2399B8FC8B6ED971D4A76C' which is not supported by service
program OPRTLIB".
We then applied the patch for STRSAP, same results. We restored back to
the "installed" kernel (patch level 797), SAP comes up without error.
We've tried applying ALL Kernel patches, same results. SAP will not come
up, errors on STRSAP.
Incidentally, after each scenario of patch applies above, we ran a
FIXR3OWNS and APYR3KRN (just to play it safe) ... doesn't help!!
Add'lly, per the SAP on System i HomePage, it states:
"Certification of V5R2 for SAP on iSeries
SAP certified the V5R2 with all the PTFs of
the current Infoapar for V5R2. As not all of these PTFs are approved yet,
you would have to ask IBM for getting a few of these PTFs
manually via ECS.
(May be not approved PTFs: SI05925, SI05795,
SI04904, MF29517, MF29422)
SAP currently creates the necessary
Kernel-Patches for all releases in order to get rid of the SICK error
message. But fortunately there is nothing really functional in it. So, with
all these PTFs an SAP system should run fine on V5R2"
We are getting errors in SICK stating "V5R2M0 is not compatible with 46D of
Kernel" ... per the above, it seems as long as we have all OS PTFs for
V5R2M0 applied (which we do), we should be fine to continue building our
SAP system (i.e. run client copy, load PCC, load Accel HR, apply SPs etc.)
... is this true?
I thought I remembered others having problems with Kernel Patch level 1444
however I cannot find anything in my SAP on System i Archives. Has anyone
applied Kernel Patch 1444 successfully or unsuccessfully?
We've opened OSS msg 99336 however we have not rec'd a response as of yet
therefore any help that anyone could provide would be greatly appreciated.
Thank you,
Nilsa
Nilsa M. Morales
SAP Basis Consultant
ERP IT Infrastructure
IBM Business Consulting Services
vm: 404.487.2296 t/l: 546.2296
email: moralenZus.ibm.com
Client Info:
Kawasaki Rail Car, Inc.
Yonkers, NY
Tel: 914.376.4700 exts. 1216, 1217, 1218
consolut Sponsor
<http://rd.consolut.net/M=245454.2994396.4323964.2848452
/D=egroupweb/S=17050073
89:HM/A=1457554/R=0/*http://ipunda.com/clk/beibunmaisuiyuiwabei>
<http://us.adserver.consolut.net/l?M=245454.2994396.4323964.2848452
/D=egroupmai
l/S=:HM/A=1457554/rand=355401454>
Have a look to our homepage at: http://www.consolut.net
<http://www.consolut.net>
DoNotReply@consolut.eu
Your use of consolut is subject to the consolut Terms of Service
<http://www.consolut.net> .
[Non-text portions of this message have been removed]
Have a look to our homepage at: http://www.consolut.net
DoNotReply@consolut.eu
Your use of consolut is subject to http://www.consolut.net
________________________________________________________________________
________________________________________________________________________
Message: 12
Date: Tue, 18 Mar 2003 13:56:10 -0500
From: "Jim Doll" <jdollZperrigo.com>
Subject: RE: Problems starting SAP after applying Kernel Pa tch 1444
There are a couple of entries in the consolut archives--are they helpful at all?
>>> moralenZus.ibm.com 03/18/03 01:34PM >>>
Yes, we've tried that also .... several times!! We've even gone in and
verified all SQL package libraries were truly empty!!
Nilsa M. Morales
SAP Basis Consultant
ERP IT Infrastructure
IBM Business Consulting Services
vm: 404.487.2296 t/l: 546.2296
email: moralenZus.ibm.com
Client Info:
Kawasaki Rail Car, Inc.
Yonkers, NY
Tel: 914.376.4700 exts. 1216, 1217, 1218
|---------+----------------------------->
| | Andre Koji Honma |
| | <andre.honmaZfujif|
| | ilm.com.br> |
| | |
| | 03/18/2003 05:24 |
| | PM |
| | Please respond to |
| | SAP on System i |
| | |
|---------+----------------------------->
>-------------------------------------------------------------------------------\
--------------------------------------------------------------|
|
|
| To: "'DoNotReply@consolut.eu'"
<DoNotReply@consolut.eu>
|
| cc:
|
| Subject: RE: Problems starting SAP after applying
Kernel Pa tch 1444 |
|
|
>-------------------------------------------------------------------------------\
--------------------------------------------------------------|
Hello Nilsa,
Have you tried deleting sql packs? Try run command DLTR3PKG SID(<SID>)
PKGTYPE(*ALL) at OS/400.
Kind Regards,
Andre
-----Original Message-----
From: Nilsa M Morales [mailto:moralenZus.ibm.com]
Sent: terça-feira, 18 de março de 2003 13:21
To: DoNotReply@consolut.eu
Subject: Problems starting SAP after applying Kernel Patch
1444
Hello Team,
We just performed a brand new install of SAP 4.6C SR2 on an iSeries 825
with V5R2M0. The install was successful.
We then applied the patch PRDASCRTPT (as it is a pre-req to the latest 4.6D
kernel patch of DW_1444) then applied the latest Kernel patch, namely Patch
Level 1444 ... now the SAP system will not start. We are getting a
"Program Signature Violation" error on STRSAP. Details of error state "The
source program STRSAP specifies signature
X'2EF464AF1D2399B8FC8B6ED971D4A76C' which is not supported by service
program OPRTLIB".
We then applied the patch for STRSAP, same results. We restored back to
the "installed" kernel (patch level 797), SAP comes up without error.
We've tried applying ALL Kernel patches, same results. SAP will not come
up, errors on STRSAP.
Incidentally, after each scenario of patch applies above, we ran a
FIXR3OWNS and APYR3KRN (just to play it safe) ... doesn't help!!
Add'lly, per the SAP on System i HomePage, it states:
"Certification of V5R2 for SAP on iSeries
SAP certified the V5R2 with all the PTFs of
the current Infoapar for V5R2. As not all of these PTFs are approved yet,
you would have to ask IBM for getting a few of these PTFs
manually via ECS.
(May be not approved PTFs: SI05925, SI05795,
SI04904, MF29517, MF29422)
SAP currently creates the necessary
Kernel-Patches for all releases in order to get rid of the SICK error
message. But fortunately there is nothing really functional in it. So, with
all these PTFs an SAP system should run fine on V5R2"
We are getting errors in SICK stating "V5R2M0 is not compatible with 46D of
Kernel" ... per the above, it seems as long as we have all OS PTFs for
V5R2M0 applied (which we do), we should be fine to continue building our
SAP system (i.e. run client copy, load PCC, load Accel HR, apply SPs etc.)
... is this true?
I thought I remembered others having problems with Kernel Patch level 1444
however I cannot find anything in my SAP on System i Archives. Has anyone
applied Kernel Patch 1444 successfully or unsuccessfully?
We've opened OSS msg 99336 however we have not rec'd a response as of yet
therefore any help that anyone could provide would be greatly appreciated.
Thank you,
Nilsa
Nilsa M. Morales
SAP Basis Consultant
ERP IT Infrastructure
IBM Business Consulting Services
vm: 404.487.2296 t/l: 546.2296
email: moralenZus.ibm.com
Client Info:
Kawasaki Rail Car, Inc.
Yonkers, NY
Tel: 914.376.4700 exts. 1216, 1217, 1218
consolut Sponsor
<http://rd.consolut.net/M=245454.2994396.4323964.2848452
/D=egroupweb/S=17050073
89:HM/A=1457554/R=0/*http://ipunda.com/clk/beibunmaisuiyuiwabei>
<http://us.adserver.consolut.net/l?M=245454.2994396.4323964.2848452
/D=egroupmai
l/S=:HM/A=1457554/rand=355401454>
Have a look to our homepage at: http://www.consolut.net
<http://www.consolut.net>
DoNotReply@consolut.eu
Your use of consolut is subject to the consolut Terms of Service
<http://www.consolut.net> .
[Non-text portions of this message have been removed]
Have a look to our homepage at: http://www.consolut.net
DoNotReply@consolut.eu
Your use of consolut is subject to http://www.consolut.net
Have a look to our homepage at: http://www.consolut.net
DoNotReply@consolut.eu
Your use of consolut is subject to http://www.consolut.net
________________________________________________________________________
________________________________________________________________________
Message: 13
Date: Tue, 18 Mar 2003 19:12:10 -0000
From: "Gerhard K. Goebel" <gerd.goebelZbavarian-cons.com>
Subject: Re: Problems starting SAP after applying Kernel Patch 1444
Hi Nilsa,
I normally fix the Signature Violations by rebinding the service
program to the main program. You would do that on OS level with the
following command:
UPDPGM PGM(STRSAP) MODULE(*NONE) BNDSRVPGM(KERNELLIB/OPRTLIB)
You can check what signatures a program has with the DSPPGM STRSAP,
then press enter (4 times). On that screen you see all the bound
service programs with their resprective signatures.
You can check the signatures for service programs with command
DSPSRVPGM LIBRFC then press enter (3 times).
Using the above 2 command will show if the service program in
question exists with the correct signature on your AS/400.
I hope this will resolve your problem.
Gerd
--- In DoNotReply@consolut.eu, Nilsa M Morales <moralenZu...>
wrote:
>
>
>
>
> Hello Team,
>
> We just performed a brand new install of SAP 4.6C SR2 on an iSeries
825
> with V5R2M0. The install was successful.
>
> We then applied the patch PRDASCRTPT (as it is a pre-req to the
latest 4.6D
> kernel patch of DW_1444) then applied the latest Kernel patch,
namely Patch
> Level 1444 ... now the SAP system will not start. We are getting a
> "Program Signature Violation" error on STRSAP. Details of error
state "The
> source program STRSAP specifies signature
> X'2EF464AF1D2399B8FC8B6ED971D4A76C' which is not supported by
service
> program OPRTLIB".
>
> We then applied the patch for STRSAP, same results. We restored
back to
> the "installed" kernel (patch level 797), SAP comes up without
error.
>
> We've tried applying ALL Kernel patches, same results. SAP will
not come
> up, errors on STRSAP.
>
> Incidentally, after each scenario of patch applies above, we ran a
> FIXR3OWNS and APYR3KRN (just to play it safe) ... doesn't help!!
>
>
>
> Add'lly, per the SAP on System i HomePage, it states:
>
> "Certification of V5R2 for SAP on iSeries
> SAP certified the V5R2 with all the
PTFs of
> the current Infoapar for V5R2. As not all of these PTFs are
approved yet,
> you would have to ask IBM for getting a few of these PTFs
> manually via ECS.
> (May be not approved PTFs: SI05925,
SI05795,
> SI04904, MF29517, MF29422)
> SAP currently creates the necessary
> Kernel-Patches for all releases in order to get rid of the SICK
error
> message. But fortunately there is nothing really functional in it.
So, with
> all these PTFs an SAP system should run fine on V5R2"
>
> We are getting errors in SICK stating "V5R2M0 is not compatible
with 46D of
> Kernel" ... per the above, it seems as long as we have all OS PTFs
for
> V5R2M0 applied (which we do), we should be fine to continue
building our
> SAP system (i.e. run client copy, load PCC, load Accel HR, apply
SPs etc.)
> ... is this true?
>
>
>
> I thought I remembered others having problems with Kernel Patch
level 1444
> however I cannot find anything in my SAP on System i Archives. Has
anyone
> applied Kernel Patch 1444 successfully or unsuccessfully?
>
> We've opened OSS msg 99336 however we have not rec'd a response as
of yet
> therefore any help that anyone could provide would be greatly
appreciated.
>
> Thank you,
> Nilsa
>
>
>
> Nilsa M. Morales
> SAP Basis Consultant
> ERP IT Infrastructure
> IBM Business Consulting Services
>
> vm: 404.487.2296 t/l: 546.2296
> email: moralenZu...
>
> Client Info:
> Kawasaki Rail Car, Inc.
> Yonkers, NY
> Tel: 914.376.4700 exts. 1216, 1217, 1218
________________________________________________________________________
________________________________________________________________________
Message: 14
Date: Tue, 18 Mar 2003 14:20:06 -0500
From: Nilsa M Morales <moralenZus.ibm.com>
Subject: RE: Problems starting SAP after applying Kernel Pa tch 1444
Honestly, Jim, I'm not able to find any entries in the SAP on System i DB (I
thought I had seen this error reported in previous emails however I am
unable to find them now) - can you let me know how you are searching?
Nilsa M. Morales
SAP Basis Consultant
ERP IT Infrastructure
IBM Business Consulting Services
vm: 404.487.2296 t/l: 546.2296
email: moralenZus.ibm.com
Client Info:
Kawasaki Rail Car, Inc.
Yonkers, NY
Tel: 914.376.4700 exts. 1216, 1217, 1218
|---------+---------------------------->
| | "Jim Doll" |
| | <jdollZperrigo.co|
| | m> |
| | |
| | 03/18/2003 01:56 |
| | PM |
| | Please respond to|
| | SAP on System i |
| | |
|---------+---------------------------->
>-------------------------------------------------------------------------------\
--------------------------------------------------------------|
|
|
| To: <DoNotReply@consolut.eu>
|
| cc:
|
| Subject: RE: Problems starting SAP after applying
Kernel Pa tch 1444 |
|
|
>-------------------------------------------------------------------------------\
--------------------------------------------------------------|
There are a couple of entries in the consolut archives--are they helpful at
all?
>>> moralenZus.ibm.com 03/18/03 01:34PM >>>
Yes, we've tried that also .... several times!! We've even gone in and
verified all SQL package libraries were truly empty!!
Nilsa M. Morales
SAP Basis Consultant
ERP IT Infrastructure
IBM Business Consulting Services
vm: 404.487.2296 t/l: 546.2296
email: moralenZus.ibm.com
Client Info:
Kawasaki Rail Car, Inc.
Yonkers, NY
Tel: 914.376.4700 exts. 1216, 1217, 1218
|---------+----------------------------->
| | Andre Koji Honma |
| | <andre.honmaZfujif|
| | ilm.com.br> |
| | |
| | 03/18/2003 05:24 |
| | PM |
| | Please respond to |
| | SAP on System i |
| | |
|---------+----------------------------->
>-------------------------------------------------------------------------------\
--------------------------------------------------------------|
|
|
| To: "'DoNotReply@consolut.eu'"
<DoNotReply@consolut.eu>
|
| cc:
|
| Subject: RE: Problems starting SAP after applying
Kernel Pa tch 1444 |
|
|
>-------------------------------------------------------------------------------\
--------------------------------------------------------------|
Hello Nilsa,
Have you tried deleting sql packs? Try run command DLTR3PKG SID(<SID>)
PKGTYPE(*ALL) at OS/400.
Kind Regards,
Andre
-----Original Message-----
From: Nilsa M Morales [mailto:moralenZus.ibm.com]
Sent: terça-feira, 18 de março de 2003 13:21
To: DoNotReply@consolut.eu
Subject: Problems starting SAP after applying Kernel Patch
1444
Hello Team,
We just performed a brand new install of SAP 4.6C SR2 on an iSeries 825
with V5R2M0. The install was successful.
We then applied the patch PRDASCRTPT (as it is a pre-req to the latest 4.6D
kernel patch of DW_1444) then applied the latest Kernel patch, namely Patch
Level 1444 ... now the SAP system will not start. We are getting a
"Program Signature Violation" error on STRSAP. Details of error state "The
source program STRSAP specifies signature
X'2EF464AF1D2399B8FC8B6ED971D4A76C' which is not supported by service
program OPRTLIB".
We then applied the patch for STRSAP, same results. We restored back to
the "installed" kernel (patch level 797), SAP comes up without error.
We've tried applying ALL Kernel patches, same results. SAP will not come
up, errors on STRSAP.
Incidentally, after each scenario of patch applies above, we ran a
FIXR3OWNS and APYR3KRN (just to play it safe) ... doesn't help!!
Add'lly, per the SAP on System i HomePage, it states:
"Certification of V5R2 for SAP on iSeries
SAP certified the V5R2 with all the PTFs of
the current Infoapar for V5R2. As not all of these PTFs are approved yet,
you would have to ask IBM for getting a few of these PTFs
manually via ECS.
(May be not approved PTFs: SI05925, SI05795,
SI04904, MF29517, MF29422)
SAP currently creates the necessary
Kernel-Patches for all releases in order to get rid of the SICK error
message. But fortunately there is nothing really functional in it. So, with
all these PTFs an SAP system should run fine on V5R2"
We are getting errors in SICK stating "V5R2M0 is not compatible with 46D of
Kernel" ... per the above, it seems as long as we have all OS PTFs for
V5R2M0 applied (which we do), we should be fine to continue building our
SAP system (i.e. run client copy, load PCC, load Accel HR, apply SPs etc.)
... is this true?
I thought I remembered others having problems with Kernel Patch level 1444
however I cannot find anything in my SAP on System i Archives. Has anyone
applied Kernel Patch 1444 successfully or unsuccessfully?
We've opened OSS msg 99336 however we have not rec'd a response as of yet
therefore any help that anyone could provide would be greatly appreciated.
Thank you,
Nilsa
Nilsa M. Morales
SAP Basis Consultant
ERP IT Infrastructure
IBM Business Consulting Services
vm: 404.487.2296 t/l: 546.2296
email: moralenZus.ibm.com
Client Info:
Kawasaki Rail Car, Inc.
Yonkers, NY
Tel: 914.376.4700 exts. 1216, 1217, 1218
consolut Sponsor
<http://rd.consolut.net/M=245454.2994396.4323964.2848452
/D=egroupweb/S=17050073
89:HM/A=1457554/R=0/*http://ipunda.com/clk/beibunmaisuiyuiwabei>
<http://us.adserver.consolut.net/l?M=245454.2994396.4323964.2848452
/D=egroupmai
l/S=:HM/A=1457554/rand=355401454>
Have a look to our homepage at: http://www.consolut.net
<http://www.consolut.net>
DoNotReply@consolut.eu
Your use of consolut is subject to the consolut Terms of Service
<http://www.consolut.net> .
[Non-text portions of this message have been removed]
Have a look to our homepage at: http://www.consolut.net
DoNotReply@consolut.eu
Your use of consolut is subject to http://www.consolut.net
Have a look to our homepage at: http://www.consolut.net
DoNotReply@consolut.eu
Your use of consolut is subject to http://www.consolut.net
Have a look to our homepage at: http://www.consolut.net
DoNotReply@consolut.eu
Your use of consolut is subject to http://www.consolut.net
________________________________________________________________________
________________________________________________________________________
Message: 15
Date: Tue, 18 Mar 2003 14:44:02 -0500
From: "Jim Doll" <jdollZperrigo.com>
Subject: RE: Problems starting SAP after applying Kernel Pa tch 1444
I started with Volker's page: http://www.4soi.de/
Clicked on the "consolut Group" down the left side.
Scrolled down a little to the "Search archive" and entered "Signature" there.
Hope it helps!
Jim Doll
>>> moralenZus.ibm.com 03/18/03 02:20PM >>>
Honestly, Jim, I'm not able to find any entries in the SAP on System i DB (I
thought I had seen this error reported in previous emails however I am
unable to find them now) - can you let me know how you are searching?
Nilsa M. Morales
SAP Basis Consultant
ERP IT Infrastructure
IBM Business Consulting Services
vm: 404.487.2296 t/l: 546.2296
email: moralenZus.ibm.com
Client Info:
Kawasaki Rail Car, Inc.
Yonkers, NY
Tel: 914.376.4700 exts. 1216, 1217, 1218
|---------+---------------------------->
| | "Jim Doll" |
| | <jdollZperrigo.co|
| | m> |
| | |
| | 03/18/2003 01:56 |
| | PM |
| | Please respond to|
| | SAP on System i |
| | |
|---------+---------------------------->
>-------------------------------------------------------------------------------\
--------------------------------------------------------------|
|
|
| To: <DoNotReply@consolut.eu>
|
| cc:
|
| Subject: RE: Problems starting SAP after applying
Kernel Pa tch 1444 |
|
|
>-------------------------------------------------------------------------------\
--------------------------------------------------------------|
There are a couple of entries in the consolut archives--are they helpful at
all?
>>> moralenZus.ibm.com 03/18/03 01:34PM >>>
Yes, we've tried that also .... several times!! We've even gone in and
verified all SQL package libraries were truly empty!!
Nilsa M. Morales
SAP Basis Consultant
ERP IT Infrastructure
IBM Business Consulting Services
vm: 404.487.2296 t/l: 546.2296
email: moralenZus.ibm.com
Client Info:
Kawasaki Rail Car, Inc.
Yonkers, NY
Tel: 914.376.4700 exts. 1216, 1217, 1218
|---------+----------------------------->
| | Andre Koji Honma |
| | <andre.honmaZfujif|
| | ilm.com.br> |
| | |
| | 03/18/2003 05:24 |
| | PM |
| | Please respond to |
| | SAP on System i |
| | |
|---------+----------------------------->
>-------------------------------------------------------------------------------\
--------------------------------------------------------------|
|
|
| To: "'DoNotReply@consolut.eu'"
<DoNotReply@consolut.eu>
|
| cc:
|
| Subject: RE: Problems starting SAP after applying
Kernel Pa tch 1444 |
|
|
>-------------------------------------------------------------------------------\
--------------------------------------------------------------|
Hello Nilsa,
Have you tried deleting sql packs? Try run command DLTR3PKG SID(<SID>)
PKGTYPE(*ALL) at OS/400.
Kind Regards,
Andre
-----Original Message-----
From: Nilsa M Morales [mailto:moralenZus.ibm.com]
Sent: terça-feira, 18 de março de 2003 13:21
To: DoNotReply@consolut.eu
Subject: Problems starting SAP after applying Kernel Patch
1444
Hello Team,
We just performed a brand new install of SAP 4.6C SR2 on an iSeries 825
with V5R2M0. The install was successful.
We then applied the patch PRDASCRTPT (as it is a pre-req to the latest 4.6D
kernel patch of DW_1444) then applied the latest Kernel patch, namely Patch
Level 1444 ... now the SAP system will not start. We are getting a
"Program Signature Violation" error on STRSAP. Details of error state "The
source program STRSAP specifies signature
X'2EF464AF1D2399B8FC8B6ED971D4A76C' which is not supported by service
program OPRTLIB".
We then applied the patch for STRSAP, same results. We restored back to
the "installed" kernel (patch level 797), SAP comes up without error.
We've tried applying ALL Kernel patches, same results. SAP will not come
up, errors on STRSAP.
Incidentally, after each scenario of patch applies above, we ran a
FIXR3OWNS and APYR3KRN (just to play it safe) ... doesn't help!!
Add'lly, per the SAP on System i HomePage, it states:
"Certification of V5R2 for SAP on iSeries
SAP certified the V5R2 with all the PTFs of
the current Infoapar for V5R2. As not all of these PTFs are approved yet,
you would have to ask IBM for getting a few of these PTFs
manually via ECS.
(May be not approved PTFs: SI05925, SI05795,
SI04904, MF29517, MF29422)
SAP currently creates the necessary
Kernel-Patches for all releases in order to get rid of the SICK error
message. But fortunately there is nothing really functional in it. So, with
all these PTFs an SAP system should run fine on V5R2"
We are getting errors in SICK stating "V5R2M0 is not compatible with 46D of
Kernel" ... per the above, it seems as long as we have all OS PTFs for
V5R2M0 applied (which we do), we should be fine to continue building our
SAP system (i.e. run client copy, load PCC, load Accel HR, apply SPs etc.)
... is this true?
I thought I remembered others having problems with Kernel Patch level 1444
however I cannot find anything in my SAP on System i Archives. Has anyone
applied Kernel Patch 1444 successfully or unsuccessfully?
We've opened OSS msg 99336 however we have not rec'd a response as of yet
therefore any help that anyone could provide would be greatly appreciated.
Thank you,
Nilsa
Nilsa M. Morales
SAP Basis Consultant
ERP IT Infrastructure
IBM Business Consulting Services
vm: 404.487.2296 t/l: 546.2296--------------------------------------
email: moralenZus.ibm.com
Client Info:
Kawasaki Rail Car, Inc.
Yonkers, NY
Tel: 914.376.4700 exts. 1216, 1217, 1218
consolut Sponsor
<http://rd.consolut.net/M=245454.2994396.4323964.2848452
/D=egroupweb/S=17050073
89:HM/A=1457554/R=0/*http://ipunda.com/clk/beibunmaisuiyuiwabei>
<http://us.adserver.consolut.net/l?M=245454.2994396.4323964.2848452
/D=egroupmai
l/S=:HM/A=1457554/rand=355401454>
Have a look to our homepage at: http://www.consolut.net
<http://www.consolut.net>
DoNotReply@consolut.eu
Your use of consolut is subject to the consolut Terms of Service
<http://www.consolut.net> .
[Non-text portions of this message have been removed]
Have a look to our homepage at: http://www.consolut.net
DoNotReply@consolut.eu
Your use of consolut is subject to http://www.consolut.net
Have a look to our homepage at: http://www.consolut.net
DoNotReply@consolut.eu
Your use of consolut is subject to http://www.consolut.net
Have a look to our homepage at: http://www.consolut.net
DoNotReply@consolut.eu
Your use of consolut is subject to http://www.consolut.net
Have a look to our homepage at: http://www.consolut.net
DoNotReply@consolut.eu
Your use of consolut is subject to http://www.consolut.net
________________________________________________________________________
________________________________________________________________________
Message: 16
Date: Tue, 18 Mar 2003 21:50:52 -0000
From: "Jerry Cummins" <jcumminsZyorkgrp.com>
Subject: Virtual Optical Drive
Has anyone setup and used a virtual optical device on iSeries? If
so, how well does this work?
________________________________________________________________________
________________________________________________________________________
Message: 17
Date: Wed, 19 Mar 2003 08:56:34 +1100
From: Andrew Tilbrook <tilbrookaZdairyfarmers.com.au>
Subject: RE: Virtual Optical Drive
Yes we have. It works extremely well. I assume you are wanting to use it
with image catalogs. There is a PTF that is required under V5R1 to use this
feature and allow an upgrade to V5R2 from image catalogs. I can't remember
the PTF, but if you search the APARs for Image Catalog you should find it.
There is one trap there - you must have at least 1Gb of free space on your
load source disk.
We currently have 5 iSeries systems to maintain, and they are housed at a
"lights-out" facility. Using image catalogs, we can pre-load CUME CDs on one
system (the images associated with an image catalog are stored in an IFS
directory) then save the images to a SAVF and use FTP to transfer to all
others. The installation process then runs without any intervention.
Regards,
Andrew Tilbrook
Computer Services Manager
Dairy Farmers
8 Parkview Drive
Homebush Bay NSW 2140
AUSTRALIA
-----Original Message-----
From: Jerry Cummins [mailto:jcumminsZyorkgrp.com]
Sent: Wednesday, 19 March 2003 8:51
To: DoNotReply@consolut.eu
Subject: Virtual Optical Drive
Has anyone setup and used a virtual optical device on iSeries? If
so, how well does this work?
Have a look to our homepage at: http://www.consolut.net
DoNotReply@consolut.eu
Your use of consolut is subject to http://www.consolut.net
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Message: 18
Date: Wed, 19 Mar 2003 08:11:59 +0100
From: thomas.kremminZseeber.de
Subject: Antwort: Moving 4.0B systems
Hi Robert,
alway when I have to do somthing like that I use the homogenous system
copie procedure from SAP. But we are runnig 4.6C.
We use the origianl CD's and if there are problems during the installation
with the kernel, we apply the new one.
Best regards
Thomas
|---------+---------------------------->
| | Robert Clay |
| | <zreclayZconsolut.co|
| | m> |
| | |
| | 18.03.2003 16:06 |
| | Bitte antworten |
| | an SAP on System i |
|---------+---------------------------->
>-------------------------------------------------------------------------------\
-------------------------------------------------------------------|
|
|
| An: DoNotReply@consolut.eu
|
| Kopie:
|
| Thema: Moving 4.0B systems
|
>-------------------------------------------------------------------------------\
-------------------------------------------------------------------|
We are running SAP 4.0B, kernel patch 958 on iSeries V5R1. We have our
production (PRD) instance on one machine and our development (TST) and test
(QAS) instance on another.
When we first implemented SAP, we had all three instances on the PRD
machine. DASD usage was an issue at the time and a decision was made to
move TST and QAS to the other machine. We had consultants that performed
this move.
We are preparing for an upgrade to the latest version of SAP. We only use
FI and CO.
Now, the time has come for the TST and QAS instances to move back to the
PRD machine. I feel certain that I can do this but I want to have an
action plan before I start.
My question concerns whether to treat the movement of the TST and QAS
instances as if they were copies or as if they were new installs (and yes,
I remember the license keys issue). Since we are at 4.0B, the installation
CD and the Installation guide are very dated. In fact, we are now using
the 40B_COM kernel and I do not know how that will impact the process.
Basically, I could either use the LODRUN command and cancel at the
appropriate point and restore the saved R3TSTDATA library from there, just
like a refresh,
***OR***
I could use the CREATE COLLECTION R3<sid>DATA command and just restore the
data library and the kernel library and treat it as a restore, handling the
IFS connectivity and TMS rebuild manually.
Since PRD is already on the machine, couldn't I simply use ADDR3SYS command
and avoid all the drama associated wth the ancient CD and LODRUN?
If anyone has been through a similar situation, any advice and/or insight
would be greatly appreciated.
Robert Clay
Opinions expressed are my own and not necessarily those of my employer.
---------------------------------
Do you consolut?
consolut Platinum - Watch CBS' NCAA March Madness, live on your desktop!
[Non-text portions of this message have been removed]
Y
a
h
o
o
!
G
r
o
u
p
s
S
p
o
n
s
o
r
A
D
V
E
R
T
I
S
E
M
E
N
T
Have a look to our homepage at: http://www.consolut.net
DoNotReply@consolut.eu
________________________________________________________________________
________________________________________________________________________
Your use of consolut is subject to http://www.consolut.net
To: DoNotReply@consolut.eu
[Non-text portions of this message have been removed]
Durban Tours - Südafrika Safari
PERFORM Short Reference Fill RESBD Structure from EBP Component Structure
This documentation is copyright by SAP AG.
Length: 148957 Date: 20240424 Time: 062614 sap01-206 ( 17 ms )
