Ansicht
Dokumentation
12223 - "Function not supported by file system" during R3SETUP
Vendor Master (General Section) RFUMSV00 - Advance Return for Tax on Sales/PurchasesThis documentation is copyright by SAP AG.
"Function not supported by file system" during R3SETUP
Hi Peer,CHGR3SYSLE needs to be in the kernel. I would suggest, to get is from
another box. Otherwise we could mail it to you.
Regards
Volker
--- In DoNotReply@consolut.eu, "Per-Lennart Andersson"
<peranderssonZc...> wrote:
>
> Volker
>
> Thanks - You solved that problem but I got one more in step Create
SAP
> license table.
>
> [Thr 00000000:00000006] db_con_connect (con_name=R/3)
> ERROR 2003-12-08 00:54:47 DBR3LICENSECREATE_IND_DB4 SlicCall:0
> See logfile dev_slic for further information.
>
> ERROR 2003-12-08 00:54:47 DBR3LICENSECREATE_IND_DB4
InstallationDo:0
> Phase failed.
>
> The logfile dev_slic told me:
>
> ---------------------------------------------------
> trc file: "dev_slic", trc level: 2, release: "46D"
> ---------------------------------------------------
> ¬Thr 00000000:00000006| Mon Dec 8 00:54:47 2003
> ¬Thr 00000000:00000006| SlicSapInstall: sysname: >QN2< connect: >1<
> rollback: >1<
> ¬Thr 00000000:00000006| DB connection handle = 1.
> ¬Thr 00000000:00000006| *** ERROR => CPF0006 occured. Refer to job
log.
> ¬dbsldb4dbi.c 1108|
> ¬Thr 00000000:00000006| *** ERROR => Error: CALL PGM(CHGR3SYSLE)
PARM('
> *ADD') failed. ¬dbsldb4u
> ¬Thr 00000000:00000006|
>
**********************************************************************
*******
>
>
> *
> ¬Thr 00000000:00000006| * LOCATION CPIC (TCP/IP) on local host
> ¬Thr 00000000:00000006| * ERROR Connect to database failed
> ¬Thr 00000000:00000006| *
> * TIME Mon Dec 8 00:54:47 2003
> ¬Thr 00000000:00000006| * RELEASE 46D
> ¬Thr 00000000:00000006| * COMPONENT SLIC
>
> Program CHGR3SYSLE is not in the system at all.....
>
> As note 392165 describe for the error above in R3SETUP I download
and patch
> program DBINCONDB4 with DBINCON. OK APYR3FIX completed.
> Same error then I restart R3SETUP. I also take a chance on apply a
newer
> R3SETUP but same error.... What to do???
>
> Regards
>
> **************************************************
> Per-Lennart Andersson
> Coca-Cola Drycker Sverige AB
>
> Tel +46 8 5007 5057 Mobil +46 70 320 5743
>
>
>
>
>
> "Volker
> Gueldenpfennig" To:
DoNotReply@consolut.eu
> <volker.gueldenpfenni
cc:
> gZsap.com> Subject:
Re: "Function not supported by
> file system"
during R3SETUP
> 2003-12-06
21:09
> Please respond
to
>
SAP on System i
>
>
>
>
>
>
> Hi Per-Lennart,
>
> as described in note 392165 in point 9 (it is wrong, that it only
> happens in 3-tier appl-servers!), you have to install the following
> both patches:
> CRTR3SYS and CRTR3INST
>
> As you are using the old Kernel CD and now the new is patched on the
> SMP, you can't find these patches there.
> I could suggest the following options to you:
> - install the complete 1444 CD just now and proceed then
> - get the CRTR3SYS and CRTR3INST *PGM from the new CD (e.g. from a
> differrent kernel on another LPAR) and hope that they work together
> with this old kernel - it may be an UPDPGM on these EXEs necessary,
> with the program, you get a "Signature Violation".
> - as the root cause of your problem is that the trans directory is
> on a different host, you could change this to local as well.
>
> (if you find crtr3sys or crtr3inst in the r3setup directory, you
> have to update them as well, because they are then most likely
used!)
>
> As everything seems to be very complicated right now, we should
> think how to optimize this for other customers. I think, these
> problems will be fixed with the new EXT kernel, that will be
> available in a few days, as these kernels replace the installation
> sets as well.
>
> For you I would suggest to make the trans dir locally for temporary.
>
> You can do this similar as follows:
> - rmvlnk '/usr/sap/trans'
> - addlnk '/usr/sap/trans' '/sapmnt/trans'
> (I don't know the order in the last command - you should check the
> F4)
> - restart r3setup - it should work fine
> - after r3setup is finished do it back again
> - rmvlnk '/usr/sap/trans'
> - addlnk '/usr/sap/trans' '/qfilesvr.400/as400name/sapmnt/trans'
>
> Hope, this helps
>
> Regards
>
> Volker
>
> --- In DoNotReply@consolut.eu, "Per-Lennart Andersson"
> <peranderssonZc...> wrote:
> > Hi all
> >
> > Trying to move one R3 system from one LPAR to another. Using
> R3SETUP and
> > command file DBR3CP.R3S. It stop in fase CRTR3SYS saying:
> > ERROR 2003-12-06 14:51:28 CRTR3SYS_IND_DB4
InternalInstallationDo:0
> > Message ID . . : SAP0897
> > Message text . : Could not execute CRTR3SYS SID(QN2)
> >
> > More information in in joblog saying:
> >
> > Message . . . . : Function not supported by file system.
> > Cause . . . . . : An attempt was made to use a function which
> was not
> > supported by the file system for
> path /usr/sap/trans/bin/TPPARAM. The
> > path
> > selected may not be valid for the function, or it may not be in
> the same
> > file system.
> > Function not supported by file system.
> > Could not execute CHGPGP OBJ('/usr/sap/trans/bin/TPPARAM')
> > NEWPGP(R3GROUP)
> > DTAAUT(*RWX) OBJAUT(*ALL).
> > Command CHGPGP failed. See previously listed messages in the
> job log.
> >
> > I guess the problem is in TPPARAM and there I just delete the old
> entry for
> > QN2 but the problem is still there after restart...
> >
> > Anybody any idea?? I'm on V5R2 (the old system V5R1) next latest
> DB and
> > Java pack. R3 on 46C SR2. On the new system there are already on
> 46C and
> > one CRM 3.1.
> >
> > Regards
> > **************************************************
> > Per-Lennart Andersson
> > Coca-Cola Drycker Sverige AB
> >
> > Tel +46 8 5007 5057 Mobil +46 70 320 5743
>
>
>
> consolut
Sponsor
>
>
>
>
> click
here
>
>
>
[IMAGE]
>
>
>
> Have a look to our homepage at: http://www.consolut.net
> DoNotReply@consolut.eu
>
>
Durban Tours - Südafrika Safari
PERFORM Short Reference TXBHW - Original Tax Base Amount in Local Currency
This documentation is copyright by SAP AG.
Length: 8443 Date: 20240419 Time: 084610 sap01-206 ( 6 ms )
