Ansicht
Dokumentation
12430 - Installing two R/3 systems DEV and TST in one iSeries 810 server.
BAL_S_LOG - Application Log: Log header data Fill RESBD Structure from EBP Component StructureThis documentation is copyright by SAP AG.
Installing two R/3 systems DEV and TST in one iSeries 810 server.
Hi,I forgot to mention, that for the case, that you can start the SAP
system manually, you can then patch the .r3s template so that the
phase DBR3START_IND_DB4 gets set to OK and should then run correctly
to the end.
Regards
Volker
--- In DoNotReply@consolut.eu, "Volker Gueldenpfennig"
<volker.gueldenpfennigZs...> wrote:
> Hi Berhanu,
>
> I'm pretty sure, that you found the correct note. In my eyes it
> should be fixed in the meantime with the latest kernel.
> Is it possible, that you logon with sidofr, check the kernel with
> DSPDTAARA KERNEL (hopefully find 900) and then issue STARTSAP ?
> Does the same problem occur ?
> I hope not. This would mean, that something in the other LIBL is
> causing the problem - perhaps in R3SETUP.
>
> Did you order the new 4.5B EXT kernel already ? CD51020598
> (http://www.easymarketplace.de/SAP-EXT-Kernel-iSeries.php)
> You should do so anyway - this should solve your issue without any
> patch ...
>
> Regards
>
> Volker
>
> --- In DoNotReply@consolut.eu, "BKifle" <kifleZm...> wrote:
> > Hi Earl,
> > Thanks for your response. I am running r/3 4.5B on OS400 V5R2. I
am
> installing my second system on this server.
> > I switched the kernel to patch leve 900 which is what worked for
> the first system I installed a week ago. When I reatart
> > R3SETUP I now get the error "Library DEV not found. CPF9810
> received when executing CHKOBJ command." at DBR3START_IND_DB4 step.
> DEV is the system ID I am using. OSS note 536557 suggests to use
the
> latest kernel. I am using the latest kernel.
> >
> > Thanks again.
> > Berhanu
> >
> >
> > -----Original Message-----
> > From: earl.konewkoZb... [mailto:earl.konewkoZb...]
> > Sent: Friday, December 19, 2003 2:07 PM
> > To: DoNotReply@consolut.eu
> > Subject: RE: Re: Installing two R/3 systems DEV
and
> TST
> > in one iSeries 810 server.
> >
> >
> > Hi Berhanu,
> >
> > OSS note 185246 has some hints. Gut feel tells me that the error
> below is a
> > symptom and not the problem. The step prior in the install is
> starting the
> > SAP system and from your note it appears that this is not
happening.
> > Hopefully there is something in the IFS trace files that will
> indicate the
> > problem. Also, I don't know what version you are working with or
> even if
> > this will help but have you tried updating to a new kernel patch
> level. I
> > have found that the kernel version on the CD is usually much
older
> than what
> > I am running. If the setup fails I do a quick kernel swap then
> restart the
> > setup and it completes.
> >
> > regards,
> > Earl
> >
> > -----Original Message-----
> > From: BKifle [mailto:kifleZm...]
> > Sent: Friday, December 19, 2003 8:39 AM
> > To: DoNotReply@consolut.eu
> > Subject: RE: Re: Installing two R/3 systems DEV
and
> TST
> > in one iSeries 810 server.
> >
> >
> > The install stopped at RFCRSWBOINI_IND_IND step with the
following
> error
> >
> > INFO 2003-12-19 10:14:46
> > Initializing the Workbench Organizer with RFC
> > ERROR 2003-12-19 10:14:46 RFCRSWBOINI_IND_IND CRfcError:0
> > RFC error
> > operation/code : RfcOpen()
> > key : RFC_IO5
> > status : RFC DRV=??? ???
> > message : Connect to SAP gateway failed
> > Connect_PM DEST=DEV, GWHOST=MRUTEST, GWSERV=sapgw01,
> > ASHOST=MRUTEST, SYSNR=01
> > LOCATION CPIC (TCP/IP) on local host
> > ERROR partner not reached (host MRUTEST.MRU.COM, service
> > 3301)
> >
> > The system has not started. I tried to start it as DEVOFR and
> SAPSTART
> > executes without error
> > but the system does not start. I tried OSS but didnot see any
thing
> that
> > helps.
> > If any of you have experienced this in the past I appreciate your
> comments.
> >
> > Berhanu
> > MAN Roland Inc.
> >
> >
> >
> > TIME Fri Dec 19 10:14:46 200
> > internal status: IO HANDLE=1077997861 DRV=??? LINE=399 CODE=5
> >
> >
> > -----Original Message-----
> > From: earl.konewkoZb... [mailto:earl.konewkoZb...]
> > Sent: Thursday, December 18, 2003 4:04 PM
> > To: DoNotReply@consolut.eu
> > Subject: RE: Re: Installing two R/3 systems DEV
and
> TST
> > in one iSeries 810 server.
> >
> >
> > Our development box has 6 SAP systems on it, 5 4.6C systems and 1
> 6.20
> > system (Solution Manager) on a 830 with 4 CPU's, 10GB of RAM, and
> 2.2TB
> > DASD.
> >
> > One thing to watch for when running the setup for the second
system
> is about
> > the kernel. The default is to copy the kernel off the CD, this
may
> conflict
> > with your existing kernel so you may want to create a separate
> kernel
> > library for the new system. I have also heard that there is a
> switch
> > parameter you can use to tell setup not to restore the kernel but
> use the
> > existing one instead but I don't know what it is. There should
be
> no
> > problem installing the new system while the first one is running,
I
> have
> > done it many times.
> >
> > regards
> > Earl
> >
> > -----Original Message-----
> > From: BKifle [mailto:kifleZm...]
> > Sent: Thursday, December 18, 2003 5:35 AM
> > To: DoNotReply@consolut.eu
> > Subject: Re: Installing two R/3 systems DEV and
TST
> in
> > one iSeries 810 server.
> >
> >
> > Hi,
> > I have a TST system on 810 server. I want to install a DEV system
> on the
> > same box. Is there a document that tells me how
> > to do this. What is not clear for me is:
> > a) How does it handle libraries like R3400 and R3WRK00 that are
not
> > identified with SID for two systems on one server?
> > b) Can I install the second system while the other system on the
> server is
> > running?
> > c) What are the precautions I need to prevent problems during and
> after the
> > install of the second system?
> > I used homogeneous system copy to create the TST system that is
> running on
> > the server. My plan is to use the same
> > procedure to create my DEV system on the same box.
> >
> > I appreciate your willingness to share your experiences.
> >
> > Thanks
> > Berhanu
> >
> > MAN Roland Inc.
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> > Have a look to our homepage at: http://www.consolut.net
> > DoNotReply@consolut.eu
> >
> > consolut Links
> >
> > To visit your group on the web, go to:
> > http://groups.consolut.net/group/SAP on System i/
> >
> > To unsubscribe from this group, send an email to:
> > DoNotReply@consolut.eu
> >
> > Your use of consolut is subject to:
> > http://www.consolut.net
> >
> >
> > Have a look to our homepage at: http://www.consolut.net
> > DoNotReply@consolut.eu
> >
> >
> > consolut Links
> >
> > To visit your group on the web, go to:
> > http://groups.consolut.net/group/SAP on System i/
> >
> > To unsubscribe from this group, send an email to:
> > DoNotReply@consolut.eu
> >
> > Your use of consolut is subject to:
> > http://www.consolut.net
> >
> >
> >
> > Have a look to our homepage at: http://www.consolut.net
> > DoNotReply@consolut.eu
> >
> > consolut Links
> >
> > To visit your group on the web, go to:
> > http://groups.consolut.net/group/SAP on System i/
> >
> > To unsubscribe from this group, send an email to:
> > DoNotReply@consolut.eu
> >
> > Your use of consolut is subject to:
> > http://www.consolut.net
> >
> >
> > Have a look to our homepage at: http://www.consolut.net
> > DoNotReply@consolut.eu
> >
> > consolut Links
> >
> > To visit your group on the web, go to:
> > http://groups.consolut.net/group/SAP on System i/
> >
> > To unsubscribe from this group, send an email to:
> > DoNotReply@consolut.eu
> >
> > Your use of consolut is subject to:
> > http://www.consolut.net
Durban Tours - Südafrika Safari
Fill RESBD Structure from EBP Component Structure CL_GUI_FRONTEND_SERVICES - Frontend Services
This documentation is copyright by SAP AG.
Length: 12711 Date: 20240419 Time: 094553 sap01-206 ( 4 ms )
