Ansicht
Dokumentation

CPD2616 - Device &25 vary failed. No recovery attempted. ( OS/400 )

CPD2616 - Device &25 vary failed. No recovery attempted. ( OS/400 )

Vendor Master (General Section)   Fill RESBD Structure from EBP Component Structure  
This documentation is copyright by IBM.
SAP E-Book


Message : CPD2616
Device &25 vary failed. No recovery attempted.

Message Long Text :

Cause . . . . . : Device vary failed. Reason code is &1. Reason codes have these meanings:
--00000001: An error occurred during vary on processing.
--00001103: Additional multifunction IOP storage is required for the requested function.
--CC100002: A possible reason is that the hardware may not be correctly cabled causing the vary on attempt to time out. Other possible reasons are a loose SCSI cable or the device being varied on is powered off.
--00002117: An invalid configuration parameter has been detected during vary on processing. If this is a cryptographic device, the APPTYPE parameter value might be set incorrectly for the device type.
--00002314: Attempt was made to vary an asynchronous device that is being used by a media library device.
--00003404: An error occurred during vary on processing.
--CC100013: A 4764 cryptographic coprocessor requires product 5733-CY1 (IBM Cryptographic Device Manager).
Recovery . . . :
--00000001: RESET(*YES) is not supported for this device.
--00001103: Consult your hardware provider for more information on obtaining MFIOP storage expansion feature 3116.
--CC100002: Inspect your hardware to ensure it is connected correctly and is powered on. Then try the request again. If this does not correct the problem, report it (ANZPRB command).
--00002117: If this resource is a cryptographic device (*CRP), then verify the application type (APPTYPE) in the device description is correct.
--00002314: Use the work with Media Library Status (WRKMLBSTS)command to vary on/off the media library device. This will automatically vary on/off the corresponding asynchronous device. (The asynchronous device name is specified in the robot device (ROBOTDEV) parameter in the media library device description.)
--00003404: Check your hardware to ensure it is connected correctly and is powered on. Look for any tape VLIC logs (major code 2E00) or error logs that were created around the time of failure which may indicate the problem. Then try the request again. If the problem occurs again report the problem (ANZPRB command).
--CC100013: Install product 5733-CY1 (IBM Cryptographic Device Manager) and try the request again.
For all other reason codes there is no recovery. Report the problem (ANZPRB command).

Message File : QCPFMSG
Library Message File : QSYS2924


BAL Application Log Documentation   Fill RESBD Structure from EBP Component Structure  
This documentation is copyright by IBM.

Length: 3258 Date: 20240328 Time: 205514     sap01-206 ( 3 ms )