Ansicht
Dokumentation

CPDA120 - IP over SNA interface &1 not changed. ( OS/400 )

Addresses (Business Address Services)   General Material Data  
This documentation is copyright by IBM.


Message : CPDA120
IP over SNA interface &1 not changed.

Message Long Text :

Cause . . . . . : The IP over SNA interface &1 has one or more associated routes. The subnet mask (SUBNETMASK) value for an IP over SNA interface cannot be changed while the interface has associated routes. To find the routes associated with the interface, issue the Network Status (NETSTAT) CL command, select option 1 Work with TCP/IP Interface Status, locate the &1 interface in the list and then select option 8, Display associated routes.
Recovery . . . : Do one of the following:
-- First remove all routes associated with the interface, and then try the request again. To find and remove the routes that can be removed, issue the Configure IP over SNA (CFGIPS) CL command, select option 2 Work with route entries, locate each route to be removed in the list, and then select option 4, Remove.
-- If all associated routes cannot be removed and the interface must be changed, end all IP over SNA and TCP/IP processing, and then try the request again. To end all IP over SNA processing, issue the Change Network Attributes (CHGNETA) CL command with the allow AnyNet support (ALWANYNET) parameter set to *NO. To end all TCP/IP processing, issue the End TCP/IP (ENDTCP) CL command.

Message File : QCPFMSG
Library Message File : QSYS2924


BAL_S_LOG - Application Log: Log header data   PERFORM Short Reference  
This documentation is copyright by IBM.

Length: 3223 Date: 20240420 Time: 134522     sap01-206 ( 3 ms )