Ansicht
Dokumentation

CPF67C8 - Command failed for device &1. Reason code &2. ( OS/400 )

CPF67C8 - Command failed for device &1. Reason code &2. ( OS/400 )

BAL Application Log Documentation   rdisp/max_wprun_time - Maximum work process run time  
This documentation is copyright by IBM.
SAP E-Book


Message : CPF67C8
Command failed for device &1. Reason code &2.

Message Long Text :

Cause . . . . . : The command sent to device &1 could not be completed. Reason codes and their meanings follow:

-- 010300: The command length was too long for the device
interface specifications.
-- 010700: The IOP does not support the size of the data
transfer requested.
-- 020900: The send or receive data transfer buffer is not
large enough.
-- 02C0yy: The device reported an error condition. yy is set
to the value of the SCSI completion status.
-- 02C100: The device did not respond to the command.
-- 02C200: Length error on the data transfer and the command
data specifies that length errors should be
reported.
-- 02C300: The IOP has detected an internal hardware failure.
-- 02C400: The command did not complete within the specified
time.
-- 02C500: The host internal system bus has failed.
-- 02C600: The IOP has detected a failure in the device
interface.
-- 02C700: The device rejected a microcode update.
-- 100000: A connection could not be opened to the device.
The device is not varied on, is in use by
another job, or already has an open connection.
-- 100001: A connection could not be opened to the device.
The device does not support the QTACTLDV API.
-- 100002: A connection could not be opened to the device.
The device is in failed state.
-- 200000: The connection to the device could not be closed.
The device is not varied on or is in use by
another job.
-- 200002: The connection to the device could not be closed.
The device is in failed state.
-- 300000: The specified device is not a tape device.
-- 300001: The resource name associated with the specified
device is not valid.
-- 300002: Data transfer direction not correct.
-- 400000: There is not an open connection to the device.
The command could not be completed.

Recovery . . . :

See the APIs topic collection in the Programming category in the IBM i Information Center book for further information. http://www.ibm.com/systems/i/infocenter/.

Message File : QCPFMSG
Library Message File : QSYS2924


Vendor Master (General Section)   Addresses (Business Address Services)  
This documentation is copyright by IBM.

Length: 3309 Date: 20240328 Time: 112337     sap01-206 ( 3 ms )