Ansicht
Dokumentation

CPFC401 - Remote server or enclosure not found. ( OS/400 )

ROGBILLS - Synchronize billing plans   rdisp/max_wprun_time - Maximum work process run time  
This documentation is copyright by IBM.


Message : CPFC401
Remote server or enclosure not found.

Message Long Text :

Cause . . . . . : The remote server or enclosure associated with the network server configuration (NWSCFG) &1 with serial number &2 was not found.
Possible causes:
-- The serial number &2 in the network server configuration &1 does not match the serial number of the remote server or enclosure.
-- The service processor in the remote server or enclosure is not connected to a network port that is accessible by an i5/OS LAN network connection.
-- The network routers or interconnecting network segment might not support multicasting. Multicasting might be required to discover the service processor.
-- The remote system is a blade server of a BladeCenter and the remote system identifier (RMTSYSID) from the remote system (*RMTSYS) network server configuration &4 is configured with a value of *SPNWSCFG. RMTSYSID must be set to the serial number of the blade server of a BladeCenter.
Recovery . . . :
-- Verify that the serial number for the remote server or enclosure is correct.
-- Verify that the service processor on the remote server or enclosure is connected to a LAN network port that is accessible by the i5/OS.
-- Contact the network administrator to determine if multicasting is supported. If multicasting is not supported, determine the IP address or host name of the service processor for the remote server or enclosure and use unicast addressing to connect to it. Use the Change NWS Configuration (CHGNWSCFG) command for NWSCFG &3. Specify *YES on the enable unicast parameter (ENBUNICAST) and enter either the service processor name (SPNAME) or SP internet address (SPINTETA).
-- If the remote system is a blade server of a BladeCenter: use the Change NWS Configuration (CHGNWSCFG) command to change the RMTSYSID parameter of NWSCFG(&4) to the serial number of the blade server.

Message File : QCPFMSG
Library Message File : QSYS2924


TXBHW - Original Tax Base Amount in Local Currency   General Material Data  
This documentation is copyright by IBM.

Length: 3237 Date: 20240417 Time: 003131     sap01-206 ( 2 ms )