Ansicht
Dokumentation

CPI0B31 - Communications I/O processor &6 removed or failed. ( OS/400 )

BAL_S_LOG - Application Log: Log header data   CPI1466 during Backup  
This documentation is copyright by IBM.


Message : CPI0B31
Communications I/O processor &6 removed or failed.

Message Long Text :

Cause . . . . . : The system did not detect a communications input/output (I/O) processor which was detected on previous IPLs. The I/O processor has type &1, model &2, and serial number &3. The direct select address was &4 and the resource name is &6. The part number is &10.
Recovery . . . : Do one of the following:
-- If the resource was removed, use the WRKHDWRSC command to remove the item with resource name &6. WRKHDWPRD will automatically remove the item, if another resource appears in the same slot.
-- If the resource is in an expansion unit which is powered off, follow the correct procedures for powering on the expansion unit.
-- If the resource is installed and powered on, it may not be working correctly. Print this screen, or copy on paper the Part number, the Serial number, the Message ID for this message, the system Machine type of &13, the system serial number of &14, the resource name &12, and the failing item code FI00100. Then use the ANZPRB command to report this problem, using the system machine type and system serial number that you printed or copied from this message.

Message File : QCPFMSG
Library Message File : QSYS2924


General Data in Customer Master   General Material Data  
This documentation is copyright by IBM.

Length: 3238 Date: 20240420 Time: 064509     sap01-206 ( 3 ms )