Ansicht
Dokumentation
CPI593A - Controller &24 failed. Probable network configuration problem. ( OS/400 )
BAL_S_LOG - Application Log: Log header data ROGBILLS - Synchronize billing plansThis documentation is copyright by IBM.
Message : CPI593A
Controller &24 failed. Probable network configuration problem.
Message Long Text :
Cause . . . . . : There are multiple controller descriptions with the same network identifier (RMTNETID parameter) and the same remote control point name (RMTCPNAME parameter) which are varied on and have negotiated the same transmission group number. This was detected during exchange identification.
Recovery . . . : Use the Vary Configuration (VRYCFG) command to vary controller &24 off. Have the remote system operator determine if there is a problem at the remote system that would cause this failure. Vary controller &24 on again.
If the problem continues, report the problem (ANZPRB command).
Technical description . . . . . . . . : The error code is &40.
The possible causes follow:
Multiple controller descriptions with the same RMTNETID and RMTCPNAME were used for parallel transmission groups, and there were multiple adjacent systems in the network that were using the same network identifier and control point name. The network identifier and control point name pair must be unique within the network.
Multiple controller descriptions with the same RMTNETID and RMTCPNAME were actually connected to one remote system and were varied on. This error condition was an internal system failure at either the local or remote system.
Message File : QCPFMSG
Library Message File : QSYS2924
RFUMSV00 - Advance Return for Tax on Sales/Purchases ROGBILLS - Synchronize billing plans
This documentation is copyright by IBM.
Length: 3254 Date: 20240419 Time: 221418 sap01-206 ( 3 ms )