Ansicht
Dokumentation

CPI59C2 - Network interface &30 failed. Cable or hardware problem. ( OS/400 )

Vendor Master (General Section)   BAL_S_LOG - Application Log: Log header data  
This documentation is copyright by IBM.


Message : CPI59C2
Network interface &30 failed. Cable or hardware problem.

Message Long Text :

Cause . . . . . : The connection to the network failed. One of the following may have caused the problem:
-- The network cable is either not installed or not working correctly.
-- The Input/Output Adapter (IOA) may not be working correctly.
Recovery . . . : Verify that the cable is still attached to the IOA in slot &27, port &28 of IOP &26. Use the Vary configuration command (VRYCFG) to vary off network interface &30. Then vary on network interface &30.
If the problem continues, report the problem (ANZPRB command).
Technical description . . . . . . . . : The error log identifier is &22.
The error code is &40. The error codes and their meanings follow:
44001A00 -- Cable removal detected. The cable has been removed from the IOA. Once the cable has been replaced, the network interface must be varied off and on.

Message File : QCPFMSG
Library Message File : QSYS2924


Vendor Master (General Section)   Vendor Master (General Section)  
This documentation is copyright by IBM.

Length: 3250 Date: 20240424 Time: 073708     sap01-206 ( 3 ms )