Ansicht
Dokumentation

CPI7D10 - Error on line &23. Unsolicited response received. ( OS/400 )

General Material Data   BAL_S_LOG - Application Log: Log header data  
This documentation is copyright by IBM.


Message : CPI7D10
Error on line &23. Unsolicited response received.

Message Long Text :

Cause . . . . . : The following may have caused the problem:
-- The IDLTMR value on the CRTLINX25 command may be set too low.
-- The network or remote station may be sending unsolicited Receive Ready (RR) or Receive Not Ready (RNR) responses.
Recovery . . . : If your X.25 line is configured to run at a low speed, the value of the IDLTMR parameter on the CRTLINX25 command may need to be increased. Use the CHGLINX25 command to increase the value of the timer. You may wish to contact your X.25 network provider or the remote operator if the problem continues. Press F14 to run problem analysis.
Technical description . . . . . . . . : The network or remote station sent an unsolicited RR or RNR response to the local station. This problem can be seen when both the local and remote stations are using a slow line speed and are sending large I-frames, if the IDLTMR (T1) value on the line descriptions are set too low. When this combination is present, the local station may try to poll the remote more than once while the remote is trying to send out a large frame. The remote station will queue up more than one RR or RNR response as a result. When the second RR or RNR response is received by the local station, it is considered an unsolicited response, and this message is surfaced. This message could also be caused by a problem with the network or remote station. The associated error log identifier is &22.

Message File : QCPFMSG
Library Message File : QSYS2924


BAL_S_LOG - Application Log: Log header data   CL_GUI_FRONTEND_SERVICES - Frontend Services  
This documentation is copyright by IBM.

Length: 3238 Date: 20240419 Time: 070203     sap01-206 ( 2 ms )