Ansicht
Dokumentation

CPI7E03 - Communications I/O adapter &27 removed or failed. ( OS/400 )

ROGBILLS - Synchronize billing plans   BAL Application Log Documentation  
This documentation is copyright by IBM.


Message : CPI7E03
Communications I/O adapter &27 removed or failed.

Message Long Text :

Cause . . . . . : The system did not detect a communications I/O adapter or I/O processor, which was detected on previous IPLs.
Recovery . . . : Do one of the following:
-- If the resource has been removed, use the WRKHDWRSC command to remove the resource.
-- If the resource is in an expansion unit that is powered off, follow correct procedures to power it on.
-- If the resource is installed and powered on, either the communications I/O adapter or the communications I/O processor may not be working correctly. Because the I/O processor and the I/O adapter are located on the same card assembly, both may be reported as failed or missing. Press F14 to run problem analysis.
Technical description . . . . . . . . : The resource is listed in the System Resource Manager (SRM) database but not in the Resource Configuration Record (RCR). It may be defective, improperly installed, removed during Miscellaneous Equipment Specification (MES) activity, or it may be in an expansion unit which is powered off.

- Problem Log ID ........: &35
- Error Log ID ..........: &22
- Processor Resource ....: &26
- Adapter Resource ......: &27

Message File : QCPFMSG
Library Message File : QSYS2924


BAL Application Log Documentation   rdisp/max_wprun_time - Maximum work process run time  
This documentation is copyright by IBM.

Length: 3249 Date: 20240423 Time: 103608     sap01-206 ( 3 ms )