Ansicht
Dokumentation

CPI7E48 - Ethernet resource &27 failed. ( OS/400 )

CPI7E48 - Ethernet resource &27 failed. ( OS/400 )

ROGBILLS - Synchronize billing plans   General Data in Customer Master  
This documentation is copyright by IBM.
SAP E-Book


Message : CPI7E48
Ethernet resource &27 failed.

Message Long Text :

Cause . . . . . : One of the following may have caused the problem:
-- Network termination, the network or network devices.
-- The Ethernet external cable is not attached to the Ethernet adapter card.
-- The Ethernet adapter card.
-- Cables attached to more than 1 cable connections on adapter &27.
Recovery . . . :
--If there is more than 1 cable connection on adapter &27, verify only one cable is attached to one of the connections. If more than one cable is attached, the adapter will not be able to determine which cable to use.
-- Make sure the Ethernet cable is attached to the Ethernet adapter card and a network device.
-- Check the Ethernet cable for physical damage and replace the cable if damage is detected.
-- If any cabling problems were found and corrected, vary on the Ethernet line and continue the procedure that failed.
-- If no cabling problems were found, press F14 to run problem analysis.
Technical description . . . . . . . . : The Ethernet adapter detected loss of carrier on the network.

- Problem Log ID ........: &35
- Processor Resource ....: &26
- Adapter Resource ......: &27

Message File : QCPFMSG
Library Message File : QSYS2924


CL_GUI_FRONTEND_SERVICES - Frontend Services   Fill RESBD Structure from EBP Component Structure  
This documentation is copyright by IBM.

Length: 3239 Date: 20240328 Time: 172729     sap01-206 ( 3 ms )