Ansicht
Dokumentation

CPI7E4A - Error on line &23. Unsolicited response received. ( OS/400 )

ROGBILLS - Synchronize billing plans   BAL Application Log Documentation  
This documentation is copyright by IBM.


Message : CPI7E4A
Error on line &23. Unsolicited response received.

Message Long Text :

Cause . . . . . : The following may have caused the problem:
-- The IDLTMR value on the CRTLINX25 command may be set too low.
-- The network or remote station may be sending unsolicited Receive Ready (RR) or Receive Not Ready (RNR) responses.
Recovery . . . : If your X.25 line is configured to run at a low speed, the value of the IDLTMR parameter on the CRTLINX25 command may need to be increased. Use the CHGLINX25 command to increase the value of the timer. You may wish to contact your X.25 network provider or the remote operator if the problem continues. Press F14 to run problem analysis.
Technical description . . . . . . . . : The network or remote station sent an unsolicited RR or RNR response to the local station. This problem can be seen when both the local and remote stations are using a slow line speed and are sending large I-frames, if the IDLTMR (T1) value on the line descriptions are set too low. When this combination is present, the local station may try to poll the remote more than once while the remote is trying to send out a large frame. The remote station will queue up more than one RR or RNR response as a result. When the second RR or RNR response is received by the local station, it is considered an unsolicited response, and this message is surfaced. This message could also be caused by a problem with the network or remote station.

- Problem Log ID ........: &35
- Error Log ID ..........: &22
- Processor Resource ....: &26
- Adapter Resource ......: &27

Message File : QCPFMSG
Library Message File : QSYS2924


Vendor Master (General Section)   Addresses (Business Address Services)  
This documentation is copyright by IBM.

Length: 3248 Date: 20240423 Time: 191610     sap01-206 ( 3 ms )