Ansicht
Dokumentation

CPI7F1D - Frame reject type Z, receive sequence count error, received on network interface &30, line &23. ( OS/400 )

CPI7F1D - Frame reject type Z, receive sequence count error, received on network interface &30, line &23. ( OS/400 )

General Material Data   ABAP Short Reference  
This documentation is copyright by IBM.
SAP E-Book


Message : CPI7F1D
Frame reject type Z, receive sequence count error, received on network interface &30, line &23.

Message Long Text :

Cause . . . . . : The following may have caused the problem:
-- The remote equipment may not be working correctly.
-- The remote equipment may be using too small a value for the response timer for the frame size used.
-- The I/O card Licensed Internal Code may not be working correctly.
Recovery . . . : You may choose to ignore this message if your line is operational. If you suspect line quality problems, consult your local ISDN network provider. Verify that if the frame size is greater than 7000, then the response timer in the remote equipment must be greater than 1.0 second. If your line is not running or you are not satisfied with the operation of your equipment, you can press F14 to report the problem.
Technical description . . . . . . . . : A frame reject type Z was received, indicating that the receive sequence number (Nr) in the control field of the last frame was incorrect.

- Problem Log ID ........: &35
- Error Log ID ..........: &22
- Processor Resource ....: &26
- Adapter Resource ......: &27
- Port Resource .........: &28

Message File : QCPFMSG
Library Message File : QSYS2924


BAL_S_LOG - Application Log: Log header data   Addresses (Business Address Services)  
This documentation is copyright by IBM.

Length: 3297 Date: 20240328 Time: 214731     sap01-206 ( 3 ms )