Ansicht
Dokumentation

CPI7F87 - Send sequence errors threshold limit reached on network interface &30. ( OS/400 )

TXBHW - Original Tax Base Amount in Local Currency   Vendor Master (General Section)  
This documentation is copyright by IBM.


Message : CPI7F87
Send sequence errors threshold limit reached on network interface &30.

Message Long Text :

Cause . . . . . : Received frames were discarded because there was not enough buffer space, or frames were lost because of one of the following:
-- The ISDN network equipment may be the cause of this problem.
-- The environment may be electrically noisy.
-- The ISDN line quality may be poor.
-- Contact problems with the ISDN cable connectors.
-- The ISDN input/output adapter card Licensed Internal Code may be the cause of this problem.
Recovery . . . : You may choose to ignore this message if your network interface is operational. If you suspect that the ISDN network equipment or the line quality is poor, consult your local ISDN network provider. If you suspect electrical noise interference, try to find the source and eliminate it. Verify that the cable is securely connected to the appropriate receptacle and that the cable is in good physical condition. You may change the frequency of occurrence of this message by adjusting the value of the FRMSEQERR and THRESHOLD parameters, using the CHGNWIISDN command. If the problem persists, run ANZPRB command to report the problem.
Technical description . . . . . . . . : The number of send sequence (Ns) errors on received frames that occurred during a specified time exceeded the threshold limit defined by the FRMSEQERR parameter on the CRTNWIISDN command, and caused this message to be displayed.

- Processor Resource ....: &26
- Adapter Resource ......: &27
- Port Resource .........: &28

Message File : QCPFMSG
Library Message File : QSYS2924


PERFORM Short Reference   CL_GUI_FRONTEND_SERVICES - Frontend Services  
This documentation is copyright by IBM.

Length: 3272 Date: 20240425 Time: 095137     sap01-206 ( 3 ms )