Ansicht
Dokumentation

CPI8E70 - Line &23 threshold information. ( OS/400 )

Vendor Master (General Section)   Fill RESBD Structure from EBP Component Structure  
This documentation is copyright by IBM.


Message : CPI8E70
Line &23 threshold information.

Message Long Text :

Cause . . . . . : One of the following may have caused the problem:
-- The local modem options for clear-to-send (CTS) may not be set correctly.
-- The environment may be electrically noisy.
-- The modem may not be properly grounded.
Recovery . . . : You may choose to ignore this message because your line is operational. If you are not satisfied with the operation of your communications equipment, verify your modem is configured correctly for CTS. Refer to the IBM Systems Hardware Information Center Planning information for information about electrical requirements and noise problem considerations. Consult the modem manufacturer to determine the proper grounding technique to use. The threshold function may be turned off or changed in the threshold (THRESHOLD) parameter on the CRTLINBSC command. To report the problem, start problem analysis (ANZPRB command).
Technical description . . . . . . . . : CTS dropped during transmission for longer than 10ms. This event occurred many times and caused a threshold error.

- Processor Resource ....: &26
- Adapter Resource ......: &27
- Port Resource .........: &28

Message File : QCPFMSG
Library Message File : QSYS2924


BAL_S_LOG - Application Log: Log header data   rdisp/max_wprun_time - Maximum work process run time  
This documentation is copyright by IBM.

Length: 3229 Date: 20240423 Time: 135934     sap01-206 ( 3 ms )