Ansicht
Dokumentation

CPI8EB2 - Line &23 threshold information. ( OS/400 )

SUBST_MERGE_LIST - merge external lists to one complete list with #if... logic for R3up   SUBST_MERGE_LIST - merge external lists to one complete list with #if... logic for R3up  
This documentation is copyright by IBM.


Message : CPI8EB2
Line &23 threshold information.

Message Long Text :

Cause . . . . . : One of the following may have caused the problem:
-- The local modem options for clear-to-send (CTS) may be set incorrectly.
-- The environment may be electrically noisy.
-- The modem may not be properly grounded.
Recovery . . . : You may choose to ignore this message because your line is operational. Ensure that the modem options for CTS are set correctly. Refer to the IBM Systems Hardware Information Center Planning information for information about electrical requirements and noise problem considerations. Consult the modem manufacturer to determine the proper grounding technique to use. The threshold function may be turned off or changed in the threshold (THRESHOLD) parameter on the CRTLINASC command. To report the problem, start problem analysis (ANZPRB command).
Technical description . . . . . . . . : The clear-to-send (CTS) signal had a line transition error many times and caused a threshold error. A line transition error is the occurrence of a single instance of a signal changing high or low and returning to its original level. Multiple instances within a short period (bouncing) are considered a single line transition error. Initial line stabilization is not considered a line transition error.

- Processor Resource ....: &26
- Adapter Resource ......: &27
- Port Resource .........: &28

Message File : QCPFMSG
Library Message File : QSYS2924


CL_GUI_FRONTEND_SERVICES - Frontend Services   PERFORM Short Reference  
This documentation is copyright by IBM.

Length: 3229 Date: 20240420 Time: 125403     sap01-206 ( 2 ms )