Ansicht
Dokumentation

CPI8F1D - Probable local hardware failure on network interface &30. ( OS/400 )

PERFORM Short Reference   Vendor Master (General Section)  
This documentation is copyright by IBM.


Message : CPI8F1D
Probable local hardware failure on network interface &30.

Message Long Text :

Cause . . . . . : One of the following may have caused the problem:
-- The communications network equipment may not be working correctly.
-- The local data communications equipment may not be working correctly.
-- The configuration values in the CRTNWIFR command may not be specified correctly.
-- The local communications adapter card may not be working correctly.
-- The local data communications cable may not be working correctly.
Recovery . . . : Verify that the network is operational. Also, verify the configuration values in the CRTNWIFR command. If the problem continues, press F14 to run problem analysis and report the problem.
Technical description . . . . . . . . : Either the clear to send (CTS) signal has failed to come up or go down in the required time following the rise or the fall of the request to send (RTS) signal, or the CTS signal has dropped while data was being sent.

- Problem Log ID ........: &35
- Error Log ID ..........: &22
- Processor Resource ....: &26
- Adapter Resource ......: &27
- Port Resource .........: &28

Message File : QCPFMSG
Library Message File : QSYS2924


General Material Data   BAL Application Log Documentation  
This documentation is copyright by IBM.

Length: 3263 Date: 20240419 Time: 103845     sap01-206 ( 2 ms )