Ansicht
Dokumentation
CPI9471 - A lack of resources was detected on I/O processor &26. ( OS/400 )
ABAP Short Reference CPI1466 during BackupThis documentation is copyright by IBM.
Message : CPI9471
A lack of resources was detected on I/O processor &26.
Message Long Text :
Cause . . . . . : I/O processor &26 licensed internal code detected a lack of resources during a deactivation request. If multiple communication lines are attached to this I/O processor, their combined line speeds may exceed the recommended value.
Recovery . . . : Do the following: 1. If multiple communications lines are attached to I/O processor &26, check the speed of each line and verify that the combined line speeds do not exceed the recommended value. If the combined line speeds of the active lines exceed the recommended value for I/O processor &26, deactivate the lines one at a time until the combined line speeds of the remaining lines do not exceed the recommended value. 2. I/O processor &26 may still be operable and further recovery may not be required. 3. If I/O processor &26 is not operable, perform VARY CONFIG with reset -- VRYCFG RESET(*YES) -- to start the I/O processor. 4. Press F14 to run problem analysis.
Technical description . . . . . . . . : The error log ID is &22.
Message File : QCPFMSG
Library Message File : QSYS2924
Fill RESBD Structure from EBP Component Structure Addresses (Business Address Services)
This documentation is copyright by IBM.
Length: 3238 Date: 20240425 Time: 083611 sap01-206 ( 3 ms )