Ansicht
Dokumentation

CPI9472 - Partial I/O processor &26 failure occurred. ( OS/400 )

General Material Data   RFUMSV00 - Advance Return for Tax on Sales/Purchases  
This documentation is copyright by IBM.


Message : CPI9472
Partial I/O processor &26 failure occurred.

Message Long Text :

Cause . . . . . : A hardware or program failure caused I/O processor &26 licensed internal code to indicate an error. If the failure occurred in a device section of the I/O processor, the device will not be operable but the I/O processor may be operable for other devices. If the failure occurred in any other section of the I/O processor, the I/O processor will not be operable.
Recovery . . . : Do the following: 1. Retry the operation that caused the error. 2. If communication lines are attached to I/O processor &26, VARY ON the communication lines to start the I/O processor. 3. I/O processor &26 may still be operable and further recovery may not be required. 4. If I/O processor &26 is not operable and DASD is not attached, perform VARY CONFIG with reset -- VRYCFG RESET(*YES) -- to start the I/O processor. 5. If I/O processor &26 is not operable and DASD is attached, IPL the system to start the I/O processor. 6. Press F14 to run problem analysis.
Technical description . . . . . . . . : The error log ID is &22.

Message File : QCPFMSG
Library Message File : QSYS2924


ABAP Short Reference   CPI1466 during Backup  
This documentation is copyright by IBM.

Length: 3227 Date: 20240419 Time: 083008     sap01-206 ( 3 ms )