OS/400 Messages

Are you looking for the description of OS/400 (System i) messages e.g. CPF9801? Then you have come to the right place. Below you can see a (hoefully) complete list of of all OS/400 messages with all “second level texts”.

Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43


Complete OS/400 Messages Documentation From CPDA09D up to CPDEF85

Complete OS/400 Messages Documentation From CPDA09D up to CPDEF85

This documentation is copyright by IBM.
Count: 1483 Skipped: 0
OS/400 Messages
Description
Table name or object type is not correct.
Conversion error occurred.
An APAR condition has occurred in module &1. The reason number is &2.
&1 routine in &2 module detected an exception. The exception return code was &3.
&1 routine in module &2 was unable to allocate storage.
Lookup of data for object &2 using address type &3 returned &1.
The file system identifier &1 is incorrect.
The call of routine &1 in module &2 returned with return code &3.
The QOpenSys directory which was just created can not be found. Lookup returned &1.
The program was not run. You have insufficient authority.
The dump request has completed. The latest spooled file QSYSPRT with label QP0FDUMP has the dump.
Quotation marks (") were used to enclose the path-name provided. Apostrophes (') are required.
Service information and a system IPL are required. The reason number is &1. The data address is &2.
The file system mount program detected an error but is continuing to run. The reason number is &1.
An incorrect object type for object address &1 file system &2 and object type &3 was provided.
The file system hash table is being extended. Phase &1 has started.
Object Extended Attributes have been lost or damaged.
File system Extended Attributes have been lost or damaged.
Extended attribute file, for file system &2, is not available. Reason &1.
File system tracking had a status change. Reason number is &1.
Could not process file identifier &1.
A request to remove all links for an object failed. The object has no name. Condition &1 exists.
An internal integrated file system directory is not found.
File system may be unusable.
Unable to correct problem &6 while reclaiming object &1.
Unable to reclaim object due to reason &3. Object is &1.
Unable to delete object due to reason &4. Object is &1.
SUBTREE and RMVLNK cannot be used together.
STMFCCSID and STMFCODPAG cannot be used together.
The &1 file system in ASP &2 cannot be processed for reason &3.
Error occurred while processing object &9.
Name has been changed for object &5.
Error occurred while processing object &9.
Errors occurred during processing of the &1 file system in ASP &2, reason &3.
CCSIDs not compatible for truncation.
&1
IP over SNA location not found.
IP over SNA location in use by another job.
IP over SNA location already exists.
&2 &1 file version not valid.
IP over SNA type of service not found.
IP over SNA type of service in use by another job.
IP over SNA interface not defined.
Interface not the correct type.
LOCTPL parameter required.
Reserved mode name not allowed.
Active IP over SNA interface &1 not changed.
IP over SNA interface &1 not changed.
IP over SNA not activated.
IP over SNA interface already started.
IP over SNA interface already ended.
Maximum number of IP over SNA interfaces already active.
IP over SNA interface not found.
IP over SNA interface in use by another job.
Time-out occurred starting IP over SNA interface.
Parameter value &1 not valid.
Cannot send configuration to IP over SNA protocol stack.
LOC parameter required.
IP over SNA interface has associated routes.
No interfaces defined for IPS or IPI support.
Function not allowed when ALWANYNET parameter is *YES.
Errors occurred ending IP over SNA interfaces.
Errors occurred ending TCP/IP.
Errors occurred starting TCP/IP.
Time-out occurred during IP over SNA activation.
Time-out occurred during IP over SNA deactivation.
Function not allowed when *ANYNW controllers are varied on.
Member &1 in database physical file &2 is in use.
Library &1 is in use.
Access right or share mode conflict for member &1.
Access right or share mode conflict for library &1.
Object &1 of type &2 is a directory.
System library QSYS cannot be renamed, copied, or deleted.
Member &3 in database physical file &1 damaged.
Object &2 in &1 of type &3 is not supported for a move operation.
Object &1 in database file &2 not found.
Object &1 of type &2 can not be opened.
Error occurred while setting attributes for object &2 type &5.
Object &1 of type &3 is not a library.
Object of type *MBR is not valid for this operation.
Open with O_APPEND mode is not supported for object type *USRSPC.
Object &1 of type &2 not allowed in &3.
Object &3 of type &5 is not a database file.
Object &1 of type *&2 is not a library.
User space name or type is not correct.
Specified attribute is not correct or unsupported.
Object name or type is not correct.
User-defined file system is in error.
MNTOVRDIR or MFS parameter required for TYPE(*UDFS).
Cannot specify both MNTOVRDIR and MFS for TYPE(*UDFS).
MFS can only be specified with TYPE(*UDFS).
Parameter MNTOVRDIR is required.
RMTLOCNAME or OBJ must be specified.
Cannot specify both RMTLOCNAME and OBJ parameters.
OPTIONS or DIR must be specified.
An error has occurred in the Network File System (NFS).
NFS server daemon of type &1 is already running.
Requirements not satisfied between parameters SERVER and NBRSVR.
Requirements not satisfied between parameters SERVER and NBRBIO.
NFS server daemon of type &1 number &2 of &3 is already running.
Cannot unmount requested file system type.
Error occurred while attempting to change UID or GID for &1.
Errors encountered while processing object &1.
An authentication problem has occurred.
There are no transport protocols available for RPCBind daemon.
Requirements not satisfied between parameters SERVER and RTVRPCREG.
Export entry &1 not found in &2.
Export request for entry &1 failed.
Requirements not satisfied between parameters OPTION and TOFILE.
Must specify TYPE(*ALL) when MNTOVRDIR(*ALL) is specified.
Requirements not satisfied between parameters OPTION and PROTOCOL.
Journal not synchronized with stream file.
An equivalent encoding scheme could not be found.
An equivalent encoding scheme could not be found.
Part of object no longer exists.
Save file data in stream file not valid.
STMFOPT(*ADD) not allowed when copying a save file.
Journaling needs to be restarted for some objects.
Journaling needs to be restarted for object.
FILESYS(*NONE) must be specified if OPTION(*CHECK) is specified.
ASP must be specified if FILESYS(*UDFS) is specified.
DETAIL and FORMAT cannot be specified if OPTION(*CHECK) is specified.
FORMAT(*TYPE1) is only valid if FILESYS(*UDFS) is specified.
Journaled object needs to be saved.
RUNPTY must be specified if OPTION(*CHGPTY) specified.
LCLBRNGLCK and OBJMFS cannot both have a value of *YES.
Cannot move window to this position.
No servers selected
Alias &1 already exists.
Size value is too large.
Path is too long.
Server name required.
Share parameter not allowed.
Error was logged by &2 service on server &1.
Alert message received from &2 service on server &1.
Unexpected error from server &1 during profile update.
User profiles on server &1 cannot be accessed.
Cannot delete user &2 from server &1.
Maximum user profiles defined for server &1.
Error setting date and time for server &1.
Error formatting storage space &2 for server &1.
Error starting service &3 for server &1.
Error setting server &1 to restricted state.
Queue of user profiles for server &1 is damaged.
Error communicating with server &1.
Storage space name required.
No storage spaces selected
Alias name too long.
Storage space &2 is not usable.
Error accessing storage space &2.
Not authorized to storage space &2.
Auditing ended unexpectedly for server &1.
Error logged by monitor job for server &1.
Error or information messages logged for server &1.
Error occurred setting server &1 to a restricted state.
Error clearing cache for server &1.
Error synchronizing user profiles for server &1.
Unable to queue user profile changes on server &1.
Path required.
Not authorized to object &1.
Network server storage space &1 not found.
Network server storage space &1 damaged.
Network server storage space &1 in use.
Network server storage space &1 incorrect.
Unable to mount UDFS for network server storage space &1.
Error processing network server storage space &1.
An error occurred while using the file system.
Server storage space &1 is partially damaged.
Error processing server storage space &1.
No default language exists for language number &2.
*YES must be specified for CPYNTWSRC.
Specify at least one port.
Size must be 2048 or less when format *FAT specified.
IPX circuits must be unique.
Maximum of two IPX circuits defined for *TRN4M and *TRN16M.
Frametype must be either *SSAP or *SNAP.
Object name not available for INSNTWSVR command. Reason code &1.
Error partitioning storage space &2 on server &1.
Error formatting storage space &2 on server &1.
Partition error for storage space &2 on server &1.
Resource name &2 not valid for reason code &1.
IPX circuits conflict with line description &1.
Error resetting configuration file &2.&3.
Shutdown error during vary off of network server &1.
Must be a security officer to do requested operation.
Size must be from 512 to 32000 megabytes when format *FAT32 specified.
Duplicate server name not allowed.
Entry type '&9' not valid.
Keyword '&9' not valid.
Value '&10' not valid for keyword '&9'.
Keyword before '=' missing.
Maximum memory allocation limit exceeded.
Multiple keywords '&9' not allowed on '&10' entry.
Keyword '&9' required for '&10' entry.
Missing '=' after keyword '&9'.
Unexpected ',' found.
Keyword '&9' value exceeds maximum length allowed.
End of file reached while reading a keyword value.
Entry type missing.
Missing ',' at end of keyword value.
Syntax error in expression.
Operand type in expression not correct.
Configuration error during vary on of NWSD &1.
Change to file &11 not allowed.
Drive &9 not found.
Cannot change files on drive &9.
Cannot change files on read-only drive &9.
Configuration member &7 in file &8/&6 ignored.
File &11 not found.
Code page &4 not valid for NWSD &1.
CCSID &4 not valid for file &8/&6.
Multiple directories not allowed for file &11.
Local adapter address &4 not valid for line type &2.
No authority to change certain network server attributes.
No authority to change certain network server user attributes.
Duplicate TCP/IP server name not allowed.
Error starting network server &1.
The NetWare language name does not match the language number.
NetWare source not copied for reason code &1.
Need to specify the RSRCNAME parameter.
LNGVER, NTWLNGID and NTWSRCDIR only parameters allowed with NWSD(*CPYONLY).
Need to specify the NTWSRCDIR parameter.
NWSDs must be varied off for the selected operation.
PTF required actions not completed for &1.
NOLOGCMD parameter is required.
Not authorized to change the network server user attributes.
NetWare source already copied and cannot be overwritten.
&2 must be only value for parameter &3.
No profiles selected
Server type not allowed for the command.
Line in configuration file &9 too long.
Size must be 2 or more when format specified is *NTFS.
Option &1 not valid for specified entry.
Not able to update disk statistics for storage space &2.
&1 command failed. See previous messages.
Server type not allowed for the command.
CMDSTDOUT parameter is not valid for server type.
CVTSTDOUT parameter is not valid for server type.
CVTSTDOUT parameter cannot be specified.
Server &1 must be varied on to use this command.
Configuration error accessing server &1.
The product you are trying to use is not installed properly.
The product you are trying to use is not installed properly.
The product you are trying to use is not installed properly.
The product you are trying to use is not installed properly.
The product you are trying to use is not installed properly.
SERVER(*NONE) and DOMAIN(*NONE) not allowed.
File truncated: &3.
Duplicate domain name not allowed.
Duplicate server name not allowed.
AUTDMN parameter is not valid for server type.
Library for IBM i5/OS Integration for Windows Server not found.
Product &1 not installed or not usable.
ASP value not valid with FORMAT value specified.
NWSSIZE value specified is too small.
NWSSIZE value specified is not valid.
FORMAT parameter not allowed when FROMNWSSTG parameter specified.
FORMAT value &2 not supported.
Error copying network server storage space &1. Reason code &2.
ASP value not valid.
Integrated server secure communication error &1.
Unable to initialize integrated server secure communications for &1
Error changing network server storage space &1. Reason code &2.
Network server storage space &1 cannot be saved as requested.
Network server storage space &1 partially saved.
Network server storage space &1 partially restored.
Network server storage space &1 will be saved with inconsistent data.
NWSSIZE value specified is too small.
An error occurred while processing the root directories.
Upgrade Environment not found.
Upgrade output queue not found.
Select only one resource name from list.
Type 1 to select option.
Optical controller descriptions not printed.
Optical device descriptions not printed.
Resource name not valid.
Required object &1 in library &3 not found.
TGTPRC parameter can only be specified with UPGENV(*NEW)
Upgrade Assistant task &1 not started.
Enhanced Upgrade Assistant for i5/OS task &1 cancelled.
Error occurred while saving libraries at priority &1.
Reassigning priority may affect object conversion management.
MERGE parameter can only be specified with UPGENV(*NEW)
CVNPOOL parameter can only be specified with UPGENV(*NEW)
*END must be specified for the MAXTIME parameter.
PTY parameter required with LIB(*PTY).
PTY parameter can only be specified with LIB(*PTY).
TGTRLS parameter required with UPGENV(*NEW).
TGTRLS parameter can only be specified with UPGENV(*NEW)
&1 required.
Licensed program &1 option &2 requires *BASE.
Prerequisite task not complete.
Only one selection allowed.
Make more changes or press Enter to confirm changes.
Make more changes or press Enter to confirm changes.
Make more changes or press Enter to confirm changes.
Type option number.
Option 1 can only be specified for one entry.
No media devices configured.
Make another change or press Enter to confirm change.
Enhanced Upgrade Assistant creating environment again.
&2 not valid for UPGENVID when UPGENV is &3.
Errors occurred while converting object &1 in library &2 type *&3.
Specified value either too large or too small.
System not in proper state for reload.
System information for type &1 not updated.
Required object &1 in library &2 not found.
Information needed to update user profile &1 not found.
Menu option not allowed.
&3 option &4 requires &1 option &2 or another product.
Removal of &3 option &4 requires removal of &1 option &2.
&3 option &4 requires &1 option &2.
Number of libraries assigned to a priority exceeds maximum.
Unable to change output queue for job.
Unable to access planning information for target release licensed programs.
Environment variable name required for this option.
Not authorized to delete IPC object &1.
IPC object &1 does not exist.
IPC object &1 is marked as damaged.
Requirements between the CLEAR parameter and the MAXSTG parameter not satisfied.
The SLTTHD and OMTTHD parameters are mutually exclusive.
Password for user &1 not available.
Unable to check for changes to resource &1.
Invocation of command processing Program &1 not valid.
System value QRETSVRSEC not set correctly.
Both *ECS and *SRVAGT are already configured.
*ECS is already configured.
Country or region information could not be retrieved.
Line description &1 could not be created.
Service configuration &1 could not be created.
Association between line &1 and modem &2 could not be created.
Validation list entry could not be created.
TCP/IP routes could not be created.
TCP/IP routes for phone list server could not be created.
Service mapping table entry could not be created.
Service &1 is not configured.
Unable to retrieve connection profile for service configuration &1.
A primary service configuration does not exist.
Service configuration does not exist.
New object name not valid.
Destination type &1 not valid. Operations on NetWare 3.12 servers are no longer available.
Error occurred while changing the connection profile for service configuration &1.
Error occurred while changing the line/modem association for service configuration &1.
Unable to retrieve service mapping table for service configuration &1.
Error occurred while changing the service mapping table for service configuration &1.
Error occurred while changing the validation list table for service configuration &1.
Error occurred while changing the TCP/IP routes for service configuration &1.
Unable to access phone list.
Service configuration &1 is currently in use.
Communications port &1 does not exist.
Modem &1 is not in the modem list.
Service configuration &1 does not exist.
Verify processing failed.
No supported communications resources found.
Modem list not found.
Incorrect number of internal ports exist for RSRCNAME(*CALC).
Internal port not defined.
Incorrect combination of values for RSRCNAME and MODEM specified.
Error occurred while accessing system information.
*SELECT is valid only in interactive mode.
Unable to access phone list to verify country or region code.
Unable to access phone list to verify state or province code.
Country or region code &1 does not exist.
State or province code &1 does not exist.
L2TP terminator profile already exists.
&1 not valid for RMTSYS.
Unable to retrieve line description information for service configuration &1.
Unable to retrieve modem information for service configuration &1.
Unable to retrieve line description information for service configuration &1.
Unable to retrieve modem information for service configuration &1.
File server job could not be started.
RSTLIB parameter not allowed.
Remote location name &1 contains syntactic errors.
OptiConnect error &1 at &2 to system &3 with target job &4.
OptiConnect connection manager open failed.
OptiConnect connection manager internal error - unrecognized resource id &1 rejected.
OptiConnect connection manager internal error - unrecognized control message &1 discarded.
OptiConnect connection manager internal error - incorrect QYYCRTNQ message &1 discarded.
OptiConnect connection manager internal error - object &1 not found.
Insufficient OptiConnect resources available to start conversation to remote system &1.
Resource &1 already varied on.
Resource &1 already varied off.
System &1 already varied on.
System &1 already varied off.
Resource &1 not varied on.
Resource &1 cannot be varied off at this time.
System &1 cannot be varied off at this time.
A timeout caused an OptiConnect disconnection from &1 using &5 at &6
OptiConnect abnormally disconnected from &1 using &5 at &6.
No OptiConnect remote systems found.
OptiConnect test to system &1 failed.
Parameter is only valid with TYPE(*STATS)
Parameter is only valid with TYPE(*TRACE)
Parameter is only valid with TYPE(*PROFILE)
Parameter is not valid with TYPE(*PROFILE)
Parameter is not valid with TYPE(*STATS)
Parameter is not valid with TYPE of *TRACE
INCDEPJOB is not valid when JOB(*ALL) is specified.
MRGJOB is only valid when TYPE(*STATS) and DATAORG(*FLAT) are specified.
INTERVAL parameter is required when TYPE(*PROFILE) is specified.
TASKNBR is not valid when TASK(*ALL) is specified
MCHINST is not valid when JOB(*NONE) is specified.
Parameter not valid when OPTION(*RESUME) is specified
Parameter is required when OPTION(*NEW) or OPTION(*INZONLY) is specified
MRGJOB not valid with DTAORG(*HIER)
Parameter &1 not valid with TYPE &2. Parameter &1 not changed.
Parameter is not valid with OPTION(*SUSPEND)
Parameter is not valid with DTAOPT(*MGTCOL)
LICBRKT selection not valid when TYPE(*STATS) is specified.
Parameter is required when TYPE(*TRACE) is specified
Parameter selection requires SLTEVT(*YES) to be specified.
DTAORG(*HIER) is not valid when JOB(*ALL) is specified.
SLTEVT(*YES) requires an event to be specified.
TRCTYPE(*SLTEVT) is not valid when SLTEVT(*NO) is specified.
FROMLIB is not needed when converting a collection from tape
*CLASSARRAY not allowed with Java class set to *ALL.
Cannot specify a TIMESLICE unless time slice option is *TIMESLICED
Events table entry are only valid when HDWOPT(*HDWEVT) is specified
Start/End table entry are only valid when TIMEOPT(*TIMESLICED) is specified
Single table entry is only valid when TIMEOPT(*NONTIMESLICED) is specified
Instruction table entry can only be specified when HDWOPT(*INSTCNT) is specified
End table entry must be greater than or equal to Start table entry
PGMBKTEVT(*PRC) is not valid when PGMBKTEVT(*MIENTRYEXIT) is specified.
JOB and TASK are only valid with OPTION(*EXTRACT).
*ALL is invalid. An event from 1 was previously defined in counter 2
Member 1 already exists in Database files
Library 1 not found
Data file 1 already exists in file format.
PGM parameter is required when PROFTYPE(*PGM) is specified.
Empty filter not allowed.
PGM parameter is only valid with PRFTYPE(*PGM)
Parameter is not valid with OPTION(*EXTRACT).
Command type not compatible with server type.
Network server storage space name valid only when creating a drive.
Storage space size valid only when creating a drive.
Format valid only when creating a drive.
Text description valid only when creating a drive.
Storage space size too small.
Network server &1 not active.
No authority to use command.
NOLOGCMD parameter cannot be specified.
DRVLTR must be K when installing the *FIREWALL network server application.
FORMAT must be *HPFS when installing the network server application.
Application not available. Product &1 (option &2) not installed.
Error occurred running MSF preprocessing program.
Error occurred running MSF preprocessing program.
Error occurred running MSF preprocessing program.
More than one directory entry is configured with the same SMTP address.
If RSRCNAME(*SELECT) is specified, MODEM(*RSRCNAME) cannot be specified.
Parameter SERVICE required.
Parameter RMTSYS required when CNNTYPE(*RMTDIAL) or CNNTYPE(*MULTIHOP) specified.
Session initialization error with network server &3.
Error closing open session to network server &3.
Error establishing session with network server &2.
Error exchanging security information for user &2 on network server &5.
Error connecting to resource &2 on network server &5.
Communication error on session to network server &3.
&1 failed for &2 with network server error code &3.
File &1 restored but is not active on network server &2.
Error &1 occurred processing share file member &2.
No libraries exist at priority &1.
Object &2 type *&3 in library &1 cannot be converted.
Errors occurred while converting object.
Object &2 type &3 in library &1 cannot be converted.
ANZOBJCVN Report could not be printed, reason code &1.
Object in a file system that is not valid. Object is &2.
Cannot specify LIB(*NONE) and OBJ(*NONE).
LIB(*NONE) is not valid with SPLFILE(*YES).
Cannot specify LIB(*NONE) and OBJ(*NONE).
Library &1 not found.
Errors ocurred while checking objects
Object could not be processed. Object is &4.
Object was not analyzed. Object is &2.
Errors occurred while converting object type *&3.
Type a number in the range from 1 to 99.
Value specified for Network Interface type not valid.
Names beginning with "Q36" reserved for Advanced 36 machines.
TCPPORTCFG parameter must be specified.
Internet address &3 not valid.
Specified name not valid.
Parameter not allowed for configuration list type.
Parameter not allowed for configuration list type.
Conflicting entry in configuration list.
No configuration list entries selected.
Entry &2 not found.
Do not specify parms PRIDLUS, BKUDLUS, DEPPUNAME, ACTTMR or RECCNTMR.
DEPLOCNAME must not be specified.
Default route not correct.
Dependent location name &1 is not unique.
CRTCTLHOST not allowed when LINKTYPE(*DLUR) specified.
LCLEXCHID required when LINKTYPE(*DLUR) specified.
Clocking not valid with this type of physical interface.
Line speed value is currently not supported for the LINESPEED parameter.
Parameter not allowed for configuration list type.
Parameter not allowed for specified link type.
Parameter values not valid.
Remote system name same as local system name.
Remote system name must be specified when linktype is *OPC
ROLE parameter invalid for specified Link type.
Subnet mask element of the TCPPORTCFG parameter not valid.
Internet address not valid.
Parameter required for access type
Duplicate internet address exists.
Function is not yet available.
Duplex must be *HALF when resource name is *NWID.
Either *INTERNAL or *VRTETHPTP TCP/IP port must be configured.
Value &1 not valid for the TCP/IP port configuration (TCPPORTCFG) parameter.
Port number *INTERNAL, 1 or 2 cannot be specified for the PORTS parameter.
Controller &24 vary configuration failed.
Subnet mask element of the TCPRTE parameter not valid.
Parameter &2 not valid for server type.
Parameters not valid for network server type.
Line &23 vary on stopped.
Line description name not allowed.
3rd port is currently not supported.
Controller description name not allowed.
Remote location name &2 not in correct format.
PRIDLUS required when LINKTYPE(*DLUR) and INLCNN(*DIAL) specified.
DEPPUNAME or LCLEXCHID required when LINKTYPE(*DLUR) specified.
Remote network identifier not allowed.
Product &1 not installed.
Remote location name not allowed.
Remote location name must be specified.
Value can be specified only if DEVCLS(*LAN) and AFP(*YES)
Duplicate TCP/IP port entries not allowed.
Dial command type not valid.
Character not valid.
When IPXPKTFWD is *NO, IPXRTGPCL cannot be *NLSP.
Value &2 for TCPHOSTNAM exceeds 31 characters.
The product you are trying to use is not installed properly.
The product you are trying to use is not installed properly.
The product you are trying to use is not installed properly.
The product you are trying to use is not installed properly.
The product you are trying to use is not installed properly.
The product you are trying to use is not installed properly.
Parameter not allowed for specified link type.
HPR path switching not allowed.
Combination of parameters not valid.
SYSDRVPGM parameter required.
Line speed value not valid.
Physical interface not valid with framing type.
Flow control not valid with framing type.
Dial command not correct with remote answer timer.
BEXROLE not allowed.
Set modem to ASYNC command parameter can not be specified.
NRZI data encoding not valid for framing type.
Dial command not valid for framing type.
Invalid clocking for physical interface type.
Dial command not valid for physical interface type.
Call number not valid with dial command.
Line &23 vary on stopped.
LANATTACH(*LEXLINK) is not valid.
Parameter can not be specified.
Inactivity timer can not be specified with connection type.
Line &1 cannot be varied on or off.
Function is not yet available.
Device &25 configuration not valid. Reason code &1.
Line &1 not compatible with attached controllers.
ACCM not valid with framing type.
Forced vary off valid only when status is *OFF or *DEALLOCATE.
Job control special authority required for forced vary off.
LEC frame size not valid.
Language version &1 not installed for product option &2.
Parameter not valid when NWITYPE is *ATM.
Error occurred with server &1.
Unable to obtain lock on device &1.
Link speed value is not valid.
Error occurred initializing network server &1.
&2 not valid for device class *OPT.
Event log not allowed.
Error occurred with server &1.
Previous object list not found.
Drive sequence number and drive letter can not be specified.
Drive sequence number (DRVSEQNBR) parameter not valid.
Value not valid for configuration object type.
No objects found for vary operation.
Generic name not allowed for type *MLBRSC.
Parameters not valid for network server type.
*PRV can not be specified for drive sequence number.
Duplicate local numbers not allowed.
Local number and SPID entry must be specified.
Parameter not allowed for rate.
Parameters not valid for channel entry.
&2 not valid for RSRCNAME(*NWID).
&2 valid only when RSRCNAME(*NWID).
&2 not valid for switched connection.
&2 not valid for nonswitched connection.
Parameter MDMINZCMD cannot be specified.
Parameter COMPRESS cannot be specified.
*NONSWTCAL or *NONSWTANS not allowed.
Controller &24 vary on failed.
&2 not valid for INTERFACE(*INTMODEM).
String not valid for MDMINZCMD parameter.
Connection list required.
Start TCP/IP interfaces can not be specified.
Enable for TCP/IP value not valid.
Character not valid.
RSTDDEVRSC value &2 is specified more than once.
Value &2 not valid for parameter RSTDDEVRSC.
Duplicate &2 values not allowed.
LCLNBR not allowed for NETTYPE.
*IVTHDLC not valid.
Information transfer type not valid.
Parameters not valid for rate and nettype.
LONGHAUL required with SHORTHAUL(*NONE).
CHLENTRY out of range.
Controller &1 cannot be varied on or off.
Function not available.
Parameters not valid for autoparm detect.
Parameters not valid for autoparm detect.
Parameter NBRDIDDGT cannot be specified.
Robot device must be an APPC device.
Function not available.
&1
&2 not allowed.
Value for network type not supported when Rate is *PRIMARY.
Network server &1 not restored.
Value &6 for argument &2 of &3 not in allowed range.
Vary on device &1 for this request.
Parameter invalid for auto spid detect.
Invalid parameter for LONGHAUL.
*ALL can not be specified for resource name.
MAXFRAME value not valid.
Line speed (LINESPEED) value not valid.
Device resource &1 no longer exists in machine resource table.
Description for device &1 partially changed.
Network server storage space &1 is not accessible.
Submit multiple jobs not allowed.
Dynamic storage link not valid.
Job description not allowed.
Network server &30 vary on failed.
IPL stream file not valid.
Resource name (RSRCNAME) not valid.
The port number under the TCP/IP port configuration (TPCPPORTCFG) parameter is not valid.
Device &25 configuration not valid. Reason code &1.
Partition name or partition number value is not valid with value specified for resource name.
Code page not valid.
Resource does not use DES key store files. The value will be ignored.
Resource does not use PKA key store files. The value will be ignored.
Robot host &2 not valid.
Combination of parameters not valid. Reason code is &2.
Status of auxiliary storage pool (ASP) device &1 not changed. Reason code is &2.
Line &1 connot be attached to server &2.
Gateway address on the TCP/IP port configuration (TCPPORTCFG) parameter not valid.
The values for ADPTADR, DUPLEX and LINESPEED are incompatible with the NWS parameter.
Configuration description not valid.
Robot host not allowed.
Local internet address not allowed. Reason code &2.
Device &25 configuration not valid. Reason code &1.
Value for local internet address required.
Incompatible port number entries.
Too many entries specified on the PORTS or TCPPORTCFG parameters.
Partition specified by network server &30 failed to start.
Not authorized to independent auxiliary storage pool (ASP) &1.
There are no tape resources to allocate for tape media library device &1.
SVRSTGASP value &1 for element &2 not valid.
STGASPDEV value not valid with value specified for SVRSTGASP.
ASP device &1 not correct.
ASP device &1 status not correct.
Associated port resource name is not valid.
Associated port resource name not allowed.
Shutdown timeout not valid
Vary processing for object &1 rejected.
Line &23 vary on failed.
Line &23 vary on failed.
Cluster quorum resource &1 in use.
Specify either PARTITION or PTNNBR, but not both.
Parameter values not valid.
Remote internet address is required when LINKTYPE(*HPRIP) specified.
Reset system can not be specified.
&1
Parameter values not valid.
Remote system name (RMTSYSNAME) parameter invalid.
Generate path certificate can not be specified.
Network server storage space cannot be added.
Storage path number parameter not valid for server type.
Virtual Ethernet path value &2 not valid.
&1 parameter value not valid for network server type.
*MLTPTHGRP not valid for default storage path (DFTSTGPTH) parameter.
Path value &2 not valid
Port value &2 not valid.
Port number not valid.
Network server host adapter description &1 not found.
Error occurred while varying network server &1.
Status of network server host adapter &1 not valid.
Security files for network server &1 may still exist.
IP security rule &1 not valid.
Network server &1 vary on failed.
Network server type (TYPE) parameter combination not valid.
Not able to allocate network server host adapter &1.
IPL source not valid.
Remote interface security rule not valid
Transmission group not valid for this controller.
Network server description (NWSD) &1 vary in progress.
Status for device &1 not changed.
A virtual device can not be attached to a controller.
Storage path or virtual Ethernet path must be specified.
Specified paths must be unique.
Path value &2 not valid
IPL parameters not valid.
Virtual Ethernet path value not valid.
Network server &1 vary on failed.
Subnet mask element of the LCLIFC parameter not valid.
Error occured varying on network server &1.
Network server &1 vary on failed.
Duplicate internet address not allowed.
Storage space can not be added.
Network server &30 vary on failed.
Network server &1 configuration not valid.
Storage path with network server &1 not valid.
Network server &1 configuration not valid.
Storage path not valid.
Network server &1 cannot be varied off.
Value &1 for serviceability options not valid.
Local internet address must not be specified.
Remote internet address must be specified.
Network image directory must be specified.
Local internet address must be specified.
Local internet address must not be specified.
Values not compatible on RSRCNAME and LCLINTNETA.
Values not compatible on RSRCNAME and LCLINTNETA.
Remote internet address (RMTINTNETA) parameter &2 not valid.
Device &1 vary on in progress.
Network image directory value too long.
Internet address &2 not valid.
Local internet address (LCLINTNETA) parameter &2 not valid.
RSRCNAME(*AGG) required with AGGPCY and AGGRSCL parameters.
Combination of values for RSRCNAME and LCLIFC not valid.
Resource name cannot be changed.
Policy type element value *RNDRBN only valid when Standard element is *ETHCHL.
DUPLEX(*FULL) required when RSRCNAME is *AGG.
Not all aggregated resource list entries support line speed &1.
Resource name &1 not valid for Ethernet line descriptions.
AGGPCY and AGGRSCL parameters required with RSRCNAME(*AGG).
Aggregated resource list for line description &1 cannot be changed.
Line &1 vary on failed.
Not all resource entries valid for aggregate Ethernet line description &1.
DUPLEX(*FULL) required when RSRCNAME is *AGG.
Duplicate aggregate resource entry &1 specified.
AGGRSCL parameter required with RSRCNAME(*AGG).
AGGRSCL parameter required with RSRCNAME(*AGG).
Clocking value not valid for this physical interface.
Folder name required with OBJTYPE(*DOC).
Library name required with object type.
CHGRPTONLY must be *NO.
CHGRPTONLY must be *NO.
User &1 not found in list.
CHGRPTONLY must be *NO.
Directory name required with object type.
A directory name may not be specified with the object type.
Cannot specify both PCTFULL and USRPRF.
Parameter &2 not valid for API &4, reason code &1.
API &3 failed with internal reason code &1.
Program &3 failed with internal reason code &1.
Parameter &2 not valid for API &4, reason code &1.
Coded character set identifier and code page cannot be used at the same time.
Journaling information no longer exists for object &2 with file ID &1.
File system failure. Independent ASP may not be usable.
Coded character set identifier and code page cannot be used at the same time.
CCSID and CODEPAGE cannot be used at the same time.
Specified value not allowed for attribute &3.
Coded character set identifier and code page cannot be used at the same time.
Entry-specific data in journal entry contains truncated symbolic link contents.
Target directory is not valid.
Attached object not copied for object &1.
Error code &3 processing network server storage space &1.
Duplicate NWSH &2 configured to use interface &1.
Restricted resource name &2 is not valid.
Shutdown error during vary off of integrated server &1.
Interface &1 used by NWSH &2 and NWSD &3 was ended.
Interface &4 configured by NWSH &5 not started.
Resource name &3 not valid for reason code &1, secondary code &2.
Port &3 not supported by network server &2.
Conversion of network server description &1 successful.
Associated port &3 specified for &5 not valid for reason code &1. Error code &2.
Thread list is not available.
Error on Add Disk Watcher Definition (ADDDWDFN) command.
Job Watcher call to user exit program completed successfully.
Error on Add Disk Watcher Definition (ADDDWDFN) command.
Error on Add Disk Watcher Definition (ADDDWDFN) command.
Error on Add Disk Watcher Definition (ADDDWDFN) command.
Error on End Disk Watcher (ENDDW) command.
Error on End Job Watcher (ENDJW) command.
Definition &1 in file &2 and library &3 not found.
Error &1 detected on application programming interface.
Product &1 Option &2 not installed.
QJAVA not in library list.
Product &1 Option &2 (Java Development Kit &3) is no longer supported.
Option &1 not valid.
&1 files deleted, &2 files not deleted.
No value in position to field.
Cursor not in column.
Position to string not number.
File name missing.
CCSID &1 not supported.
Line command not valid.
File CCSID not valid.
File CCSID incorrect.
File too large for workspace.
More than one End of Line character found.
&1 updates lost.
CCSID not specified.
CCSID not specified.
No pending change requests or change string.
Option 9 not valid.
Selection not valid.
File too large for workspace.
Out of space.
Records truncated.
&1 records copied.
End of line character not valid.
&1 records folded.
Cannot specify a stream file and a database file.
A stream file or a database file must be specified.
A member name cannot be specified with a stream file.
Changing the CCSID of the existing file to or from a UNICODE CCSID is not supported.
Only characters common to job CCSID &1 and file CCSID &2 can be displayed and edited reliably.
File Coded Character Set ID (CCSID) &1 appears to be a codepage and was converted to CCSID &2.
Change of file Coded Character Set ID (CCSID) failed.
User does not have the correct authority to enable user &1.
Some software agreements were not accepted.
Generate list from option not valid.
Output option not valid.
Product &1 option &2 release &4 is in use.
Object not found for product &1 option &2 release &4.
Product &4 cannot restore with product &1 already installed.
Licensed program &1 option &2 release &4 not installed.
Licensed program &1 option &2 release &4 not installed.
&1 not found on media.
Clear option not valid.
License acceptance required option not valid.
Nonaccepted agreement option not valid.
*PROMPT value cannot be specified in batch.
Home Directory is not valid.
Directory cannot be specified.
Combination of parameter values not valid.
Too many directories specified.
Product &1 cannot be restored because &4 is at a different release level.
RSTLICPGM command ended at request of user.
Home directories cannot be overriden.
Home directory not valid.
CODHOMEDIR not allowed for the specified RSTOBJ
LNGHOMEDIR not allowed for the specified RSTOBJ
Characters in path name not valid.
Product &1 is not valid for licensed program.
Product &1, option &2 is already in install list.
Blank licensed Program or product option is not allowed.
Product Option &1 is not valid.
Product &1, option &2 is already in install list.
Value not valid.
Software agreement not accepted for license program &1 option &2.
The software agreement must either be accepted (F14) or declined (F16).
Licensed program &1 option &2 cannot be installed.
Software agreement documents are missing.
Missing information on volumes in device &1.
Software agreement is not readable.
Licensed program &1 option &2 cannot be installed.
Licensed program &1 option &2 cannot be installed.
One or more software agreement documents are missing.
Software agreement may not be readable.
Error occured while processing software agreement.
Start space allocation value not valid.
Product &1 option &2 release &4 cannot be restored.
Vary Configuration failed.
Vary Configuration failed.
UID or GID mismatch detected for &2.
Geographic mirroring occuring but clustering is not active.
ASP is not a compatible copy.
SSPTIMO and SSPTIMOACN are only allowed with OPTION(*SUSPEND)
Suspend Timeout (SSPTIMO) is required with OPTION(*SUSPEND)
The FRCOPT is only allowed with OPTION(*FRCWRT)
Force Write option (FRCOPT) value required.
Fix group not found.
Fix group not resolved.
Fix group not found on source system.
Fix group already exists at a greater level.
Fix group not resolved on source system.
Fix group in error.
Fix group in error on source system.
Fix group requires special handling.
Request to add exit program denied. Reason &1.
User &2 not added to Group &1.
EIM association updates were not made. Reason &1.
EIM error code &1 received on &2.
System distribution directory entry for profile &1 not updated.
No SYSNAME network attribute value available.
An error occurred trying to vary-on an ASP device.
An error occurred trying to vary-on an ASP device.
A disk device problem was detected.
A disk device problem was detected.
ASP device status change not allowed.
Invalid combination of parameters.
Library &1 exists in *SYSBAS and ASP device &2.
ASP group &2 not set for thread &3.
Error attempting to open pseudoterminal device.
Error attempting to close pseudoterminal device.
Error switching user profiles.
Error switching job CCSID.
Error attempting to write to a pseudoterminal device.
Additional errors occurred but are not reported.
Cannot load PASE for i module &2.
PASE for i program or shell script not executable. Path is &1.
Invalid alignment for &2 section in PASE for i module &1.
Internal system error. Error code is &2.
Not authorized to create loader domain &2.
Not authorized to add shared object &2 to loader domain &3.
Internal system error. Error data is '&2'.
Not enough PASE for i kernel memory.
Not enough PASE for i user memory.
Symbol resolution failed for PASE for i module &2.
Symbol &2 (number &3) has an invalid &4 field in PASE for i module &1.
Address mismatch for symbol &2 (number &3).
Symbol &2 (number &3) not exported from dependent PASE for i module &4.
Type mismatch for symbol &2 (number &3) in module &1.
Deferred import symbol &2 (number &3) in PASE for i module &1 not allowed.
Relocation failed for PASE for i module &2.
Invalid &4 field for relocation entry &2 (at address &3) in PASE for i module &1.
Invalid address for relocation entry &2 (at address &3) in PASE for i module &1.
Invalid relocation length for entry &2 (at address &3) in PASE for i module &1.
Invalid relocation type for entry &2 (at address &3) in PASE for i module &1.
Too many section headers or a damaged file for PASE for i module &1.
Invalid auxiliary header size in PASE for i module &1.
Invalid magic number in PASE for i module &1.
Too many section headers in PASE for i module &1.
Invalid auxiliary header field &2 in PASE for i module &1.
Missing .loader section in PASE for i module &1.
Invalid s_scnptr or s_size field in &2 section header in PASE for i module &1.
Section size mismatch in PASE for i module &1.
Section origin mismatch in PASE for i module &1.
Invalid l_nimpid field in .loader section header of PASE for i module &1.
An offset in the .loader section header is too large in PASE for i module &1.
A count in the .loader section header is too large in PASE for i module &1.
A length in the .loader section header is too large in PASE for i module &1.
Import ID strings damaged in PASE for i module &1.
No entry point found in PASE for i program &1.
Could not load dependent PASE for i module &2.
Member &2 not found in PASE for i archive &3.
Error processing PASE for i archive &2.
No runtime definition found for symbol &2.
Unexpected error during runtime linking. See previous messages.
Unsupported PASE for i 64-bit module &1.
Not authorized to PASE for i program &1.
PASE for i program not found or in use. Path name is &1.
Too much data to load PASE for i program &1.
Error with /dev/urandom file.
Cluster administrative domain exit program failed. Reason code is &1.
Internal Cluster Resource Service data could not be restored.
Monitored resource entry &1 removed on local node.
Cluster message function pointer not found.
Cluster name mismatch found.
Job error recovery action initiated.
Save or restore of cluster resource group &1 failed.
Dump request for cluster resource group &1 completed.
Takeover IP address must be specified for application cluster resource groups.
Application identifier mismatch on node &1.
Takeover IP address &2 not started.
Unable to put data on user queue &1 in library &2.
Nodes in cluster resource group &1 at mirror copy or target site are not eligible to become a primary node.
Cluster node &1 failed to compare exit programs with node &2.
Some or all of the exit programs were not run on node &2.
Allow started IP address field is only valid when the user configures the takeover IP address.
Unexpected return code received by cluster administrative domain &1.
Cluster resource group &1 not allowed to be changed.
Application identifier is only allowed for peer cluster resource groups.
Image catalog &1 already exists in library &2.
Image catalog directory already associated with another catalog.
Image catalog name must be specified.
FROMFILE(*NEW) required with VOLNAM parameter.
Error on &3 command during virtual tape function &2. Reason code &1.
IMGCLGIDX(*VOL) not supported for optical type image catalogs.
Volume &2 not found in image catalog &1.
Image file name is not valid.
No volumes in loaded status.
OPTION(*MOUNT) required with IMGCLGIDX(*NEXT).
IMGSIZ and ALCSTG parameters must be *SAME for optical type image catalogs.
Value specified for IMGSIZ parameter too small.
Image file not valid for image catalogs of type &1.
Value &3 for IMGSIZ not valid.
Unable to insert catalog entry.
VOL parameter required with IMGCLGIDX(*VOL).
No image catalog entries in loaded status.
Mount of image catalog entry failed.
Device &2 already in use by image catalog &1.
Device &1 is not a virtual optical device.
No catalog entries exist in image catalog &1.
Image catalog &1 is already loaded in device &2.
Image catalog &1 is already unloaded.
VOLNAM parameter not valid for tape type image catalogs.
Image catalog &1 must be in not ready status.
Image file already exists in the image catalog directory.
Volume name &2 already exists in image catalog &1.
FROMDEV not valid for tape type image catalogs.
Image file not found.
Option not allowed for selected entry.
Verification of image catalog &1 failed with reason code &3.
IMGCLGIDX(*VOL) required with VOL parameter.
Image catalog &1 not sorted.
No images exist for image catalog &1, type &2.
Required image for type &2 not found in catalog &1. Reason code &3.
Image not valid.
File not found.
File not found.
File not found.
File not found.
Image file not found.
Image already exists in image catalog &1.
FROMDEV or FROMFILE parameter required.
Specify either FROMDEV or FROMFILE, but not both.
Image catalog &1 is full.
Optical device &1 is empty.
Unable to insert catalog entry.
Device &1 is not valid for parameter FROMDEV.
Index &2 not found in image catalog &1.
DEVLOD parameter required with IMGCLG parameter.
Specify either DEVLOD or IMGCLGLOD, but not both.
Specify either DEV or IMGCLG, but not both.
DEV or IMGCLG parameter required.
IMGCLGLOD parameter required with DEV parameter.
Image file create failed. Error number &1.
Image file name is not valid.
TOFILE(*FROMFILE) not allowed with FROMFILE(*NEW).
FROMFILE(*NEW) required with IMGSIZ parameter.
Image catalog &1 must be in ready status.
Image catalog &1 must be in not ready status.
Operation not allowed or conflicts with another request.
Optical type image catalog required.
Image file name too long.
Optical volume &1 not found.
Directory not found.
Optical device &1 not found.
Image catalog &1 not found.
Image catalog &1 in use.
No images exist for image catalog &1.
Not authorized to image catalog &1.
Index must be specified.
Index must be 1 to 256 or *AVAIL.
Image file name is not valid.
Image file path exceeds 5000 characters.
Image file not found.
Image catalog directory not found.
Target release &1 not valid for image catalog &4. Reason code &3.
Option not allowed for selected entry.
Verification of image catalog &1 failed with model &7 not supported.
Required image for type &2 not found in catalog &1. Reason code &3.
No compatible cipher suite available between SSL end points.
No certificate is available for SSL processing.
Certificate does not have a valid format.
Certificate type is not supported.
No Certificate Revocation List(CRL) was found.
The SSL socket is not allowed to create new SSL sessions.
Error occurred in SSL processing, check the errno value.
Peer not recognized or badly formatted message received.
SSL record contained a bad message authentication code.
Operation is not supported by SSL.
Certificate is self signed.
An operation which is not valid for the current SSL session state was attempted.
Socket descriptor used by the SSL connection has been closed.
Certificate is not signed by a trusted certificate authority.
Validity time period of the certificate is expired.
Length of certificate key is not supported.
SSL handshake timed out.
Pointer not valid.
Handle is not valid.
Label for the key database file not found.
Object containing the password for the certificate store file not found.
Close of the secure environment failed.
Attribute length is not valid.
Key database password is not valid.
Buffer size is not valid.
Identifier value is not valid.
The enumeration for the attribute is not valid.
Numeric value for the attribute is not valid.
Reset of SSL session not allowed.
Access to the key database is not allowed.
SSL session already exists.
Socket is not valid.
Key database file password has expired.
Certificate was rejected by the application supplied exit program or certificate being validated by SSL processing was revoked.
SSL is not available for use.
SSL initialization was not previously performed for this job.
Key database file was not found.
Invalid cipher suite specified.
SSL session has been previously ended.
An error occurred during SSL processing that was not expected.
Qso_OverLappedIO_t value specified is not valid.
The I/O completion port is not valid.
The socket descriptor specified within the gsk_handle is not valid.
The certificate being validated by SSL processing has been revoked.
The name could not be resolved at this time. Future attempts may succeed.
The flags had an invalid value.
A non-recoverable error occurred when attempting to resolve the name.
The address family was not recognized.
There was a memory allocation failure.
The name does not resolve for the supplied parameters.
The service passed was not recognized for the specified socket type.
The intended socket type was not recognized.
A system error occurred; the error code can be found in errno.
Application identifier is not registered to use SSL.
The extended flags had an invalid value.
No certificate authorities are registered for this secure application.
New SSL session not currently allowed.
Unknown error &1.
&3 failed for cluster node &2.
&1 is not a clustered hash table server name.
AUTL &1 does not match.
&1 partially succeeded.
Clustered hash table server is currently active on node &1.
Clustered hash table server is not active on node &1.
Action code &1 not allowed for user profile &2.
The previously reported error occurred in logical record number &1, whose sequence number is &2.
Data in an input record or resource is not correct: name &1 in &2 does not match name &3 in &4.
Error reported above detected within object type &1 with token name &2.
Error detected in resource &1.
An unsupported structured field &1 was detected.
A skip to a nonexistent channel &1 on record number &2 was detected within the LND structured fields.
Return code &2 received from module &1.
Resource object &1 not found.
&1 was specified when &2 was expected.
An incorrect token value of &1 was received.
A sub-parameter on &1 is not supported of the &2 parameter.
The number &1 is not supported for an indexing parameter.
The length of value &1 exceeds the maximum allowed length for the &2 parameter.
The number of Index field definitions used with the Index tag definition is greater than the maximum allowed.
The number of values specified for the &1 parameter exceeds the maximum allowed.
The hexadecimal string &1 is not correct.
An I/O error occurred with resource &1.
An IM image object cannot be converted to an IO image object.
Structured field &1 is not correct.
Structured field &1 is either out of sequence or not permitted.
Input data or resource contains incorrect data.
Input record contains no data.
A structured field length is less than the introducer length.
An RDW length does not agree with the length in a structured field introducer.
Padding length or extension length is incorrect for a structured field.
Length indicated in a structured field introducer is incorrect for the &1 structured field.
Structured field &1 contains an incorrect value for the size of the &2 repeating group.
Structured field &1 is not acceptable.
Duplicate overlay local identifier found in structured field &1.
Overlay local identifier value not acceptable in structured field &1.
Suppression local identifier value is not acceptable.
Error in Medium Modification Control structured fields.
Token Name parameters have the same value.
Error in Medium Copy Count structured field.
Incorrect value specified for forms-flash modification.
Maximum number of overlays exceeded.
Maximum number of suppressions allowed in one set of modifications has been exceeded.
Conflict detected in Medium Modification Control Identifier parameters.
Overlay local identifier not found in form definition.
Too many copy controls specified for current form environment group.
Null name not acceptable in &1 structured field.
Medium map &1 not found in form definition &2.
Page definition not specified.
Unexpected end of data stream encountered.
Mismatch between spooled file data and page definition.
Scale factor value in IOC structured field not acceptable.
Entry in MCF structured field contains ambiguous identification.
Entry in MCF structured field contains incomplete identification.
Simplex/duplex value in MMC structured field, ID &1, not acceptable.
Font local identifier value is not acceptable in the &1 structured field.
Modifications specified in the MCC structured field includes both normal and tumble duplex.
MCC structured field has an odd number of copy groups, but specifies duplex.
Modifications specified in the MCC structured fields include both simplex and duplex.
Unequal copy counts for duplex sheets are specified in the MCC structured field.
Modifications specified in the MCC structured field selects more than one input source.
Bin selection value in MMC structured field, ID &1, is not correct.
Suppression local identifier value in MMC structured field, ID &1, is not correct.
Required self-defining parameter with ID &1 missing from &2 structured field.
Unit base parameter in the &1 structured field is not correct.
L-units per unit base parameter in &1 structured field is not correct.
A parameter in the Begin Resource structured field is not correct.
Orientation value &1 in MDD structured field is not correct.
Structured field &1 contains too many repeating groups.
Required triplet with ID &1 missing from an IOB structured field.
A parameter in the Include Object (IOB) structured field is not correct.
Structured field &1 not allowed in a page segment included with an IOB.
Required structured field &1 could not be found.
Form definition does not contain any medium maps.
Form definition has MCC structured field errors.
Print quality value in MMC structured field, ID &1 is not acceptable.
The offset stacking value in MMC structured field, ID &1 is not acceptable.
Structured field &1 is not allowed between objects.
X-direction and Y-direction L-units per unit base values in structured field &1 do not match.
Structured field &1 contained a coded-font-local-identifier value that was used previously.
Structured field &1 contains an incorrect rotation value.
Overlay &1 named in an IPO structured field is not named in an MPO structured field.
Resource named in an object environment group is not named in the active environment group.
An environment group error occurred.
An entry in an MCF structured field does not contain code page information.
A value of zero was specified as the L-units per unit base in the &1 structured field.
Page definition does not contain any data maps.
Duplex specification value in PGP structured field is not correct.
PGP structured field does not contain a page origin position for the front side of a sheet.
Constant forms control value in MMC structured field ID &1 is not supported.
Modifications specified in the MCC structured field are in error.
A medium map specifies only constant data for a page.
Mapping option not correct or unsupported.
The next line descriptor IF SKIPPING parameter value in LND structured field number &1 is zero.
The next line descriptor IF SKIPPING parameter value in LND structured field number &1 is &2.
Error in LND structured field number &1.
Repeating group length parameter value in CCP structured field &1 is not correct.
The count parameter value in the LNC structured field is zero.
The size parameter value in the FDS structured field was zero.
The number of repeating groups parameter value in the CCP structured field is not correct.
The next line descriptor IF SPACING parameter value in LND structured field number &1 is zero.
Next Line Descriptor IF SPACING parameter in LND structured field &1 is &2 is too large.
Length of comparison string parameter value in CCP structured field &1 is not correct.
Suppression token name is not correct.
Identifier &1 specified in next CCP identifier parameter in CCP structured field &2 was not found.
The timing of action parameter value &1 in CCP structured field &2 is not correct.
The medium map action parameter value &1 in CCP structured field &2 is not correct.
The data map action parameter value &1 in CCP structured field &2 is not correct.
The comparison parameter value &1 in CCP structured field &2 is not correct.
The data map &1 specified in the data map name parameter of CCP structured field &2 was not found.
The Next Line Descriptor IF REUSING data parameter value is incorrect.
The Next Line Descriptor if reusing data parameter value in LND structured field number &1 is &2.
Data start position parameter value has an error.
Amount of fixed data does not agree with the value specified in FDS structured field size parameter.
Medium map &1 specified in medium map name parameter of CCP structured field &2 not found.
LND or RCD structured field number &1 has a conditional processing error.
Identifier &1 in the CPP identifier parameter was not found.
Error detected in a LND structured field.
Coded font error in LND or RCD structured field &1.
Value in LND structured field number &1 will cause an infinite loop.
The number of LND structured fields does not match the value specified in the LNC structured field.
A LND or RCD structured field has an error related to relative positioning.
Next line descriptor IF SPACING parameter value &1 in LND structured field number &2 is not correct.
Error detected in data length parameter value in LND structured field number &1.
The &1 number value is not numeric.
The &1 name must be delimited with quotes.
The parameter &1 is not correct.
An I/O error occurred with resource &1.
The attribute name used in &1 has an improper use of quotes.
A value of &1 is not correct for parameter &2.
An I/O error occurred with spooled file &1.
A Resource type value of &1 is not correct.
An I/O error occurred with file &2.
The maximum record ID was exceeded.
The complex IM image object cannot be converted to an IO image object.
The font resolution and metric technology triplet specifies an incorrect value.
Data in an input record or resource is not correct.
An error was detected while indexing the file.
Error detected in Index field definition number &1.
Required parameter &1 was not specified.
Index trigger definition number &1 is not correct for use within an Index tag field definition.
Index tag definition length exceeds maximum allowed.
A value of &1 is not correct for &2.
Index tag field definition number &1 is not defined.
The first Trigger definition relative record number is not equal to asterisk.
The first Index trigger definition was not defined.
A non-literal value of &1 has been supplied for &2.
Index trigger definitions were satisfied, but Index tag definitions were incomplete when the end of the input file was reached.
An incorrect Index trigger definition was specified.
An Index trigger definition was specified, but the input file is already indexed.
Index tag definition number &1 was not defined.
The input buffer is too small for parameter value &1.
End-of-file encountered before closing quote found for &1.
Internal system error in module &1 at function &2.
An internal system failure has occurred.
An internal system failure has ocurred.
Data is placed outside of the logical page in the Y-direction.
An internal system error has occurred.
An internal system error has occurred.
Data stream error detected.
An internal system failure has ocurred.
File operation requested after file closed.
The set of modifications specified includes conflicting presentation system setup ID values.
The modifications specified in the MMC structured field &1 includes unpaired &2 and &3 keywords.
The &1 structured field contains a &2 triplet that has an incorrect value.
Scope of the Medium Finishing Control (MFC) is &1 but &2 is the structured field that bounds the MFC.
The output bin selection value in the Medium Modification Control (MMC) structured field is not correct.
Different output bin values are specified for the front and back sides of a duplex sheet.
Duplicate conflicting values are specified in the Medium Modification Control (MMC) structured field.
Data in a form definition is not correct.
The output option specified in an IOB structured field is incorrect or unsupported.
Resource local ID &1 was not found.
Data missing in either input data or page definition.
A begin column specification for field&1 is less than or equal to 0.
Multiple columns were specified for field&1 which is defined with (base=trigger).
The field lengths do not match.
Index needed for the groupname was not found.
Recordrange sub-parameter allowed only if record value is '*'.
The registered object ID in the object classification triplet on a &1 structured field is not specified.
Page definition contains incorrect data.
Page definition contains incorrect data.
Page definition contains incorrect data.
Page definition contains incorrect data.
Page definition contains incorrect data.
Input data or page definition contains incorrect data.
Page definition contains incorrect data.
Page definition contains incorrect data.
Page definition contains incorrect data.
Page definition contains incorrect data.
Page definition contains incorrect data.
Page definition contains incorrect data.
Object OID length is incorrect.
Data stream error detected.
Data stream error detected.
Data stream error detected.
Data stream error detected.
Data stream error detected.
Data stream error detected.
Data stream error detected.
Data stream error detected.
Data stream error detected.
Data stream error detected.
Page definition error detected in &1.
Resource not found.
Resource not found.
Bar code data stream error detected.
Thread failed to start.
Font &1 cannot be saved.
Font &1 not found.
Error with True Type Font reference.
Object identifier not specified.
Error detected in page definition.
Object OID length specified in a fully qualified name triplet is greater than 129 bytes.
The &1 structured field contains unpaired FQN X'BE' & FQN X'DE' triplets.
An IOB structured field that includes a bar code or graphics object specifies a secondary resource.
Bar code data exceeds the output command buffer.
Duplicate finishing operation found in &1 medium map.
Number of media collection finishing nesting levels exceeds four.
Input data used for a variable resource name in LND or RCD structured field &1 is double byte data.
XML page definition requested that input data be used for a resource name on XMD structured field &1.
The encoding scheme specified in a page definition used to process the XML data is not supported.
All data maps in the page definition must specify the same encoding scheme.
A DTD declaration at character count number &1 is specified outside of a DTD.
The XML comment syntax at character count number &1 is not correct.
The XML end tag at character count number &1 does not match the last start tag.
The end of a document type declaration at character count number &1 is not the correct syntax.
The character code at character count number &1 is not a valid value for a character reference.
The entity at character count number &1 is not defined in the document type definition.
The character in a tag name at character count number &1 is not correct.
The Encoding Scheme Identifier for the user data is not specified.
The same qualified tag was specified in XMD structured field numbers &1 and &2.
Relative inline positioning on an XMD structured field can only be used to place text data.
Incorrect triplet combination specified when mapping a data object font in an MDR structured field.
Input data error detected.
An MDR structured field is mapping the name of a TrueType or OpenType collection.
A page that has fonts mapped in both an MCF and an MDR cannot specify table reference characters.
Page based SOSI processing has been requested but the needed fonts have not been mapped.
An inline TrueType or OpenType collection does not have a base font specified.
An inline resource has an incorrect specification of base fonts and/or linked fonts.
Error with TrueType/OpenType font &1.
Resource name &1 cannot be converted to UTF16 encoding.
Error with resource &1 or object OID &2.
The server type and ACCESS parameter are not compatible.
Network server &1 vary off failed.
Error occurred initializing extended server support for &1.
TCP/IP not active. Integrated server support not available.
Error preparing to regenerate digital certificates.
The new user name or password does not follow naming guidelines.
Remote server is unavailable.
Unable to reset remote server.
Remote server failed running POST on power on.
Remote Server did not power on.
Shutdown of the operating system did not occur in &1 minute(s).
No entries found for &1 principal name
PASSWORD parameter is required if KEYTABFILE parameter is not specified.
Expired time value cannot be used if *EXPIRED value is not defined.
Option &1 and &2 may not be specified together.
&1
Module &1 not found.
No modules specified.
No modules match "&1" in library &2.
&1
IPA cannot optimize module &1 in library &2.
IPA cannot bind module &1 in library &2.
IPA limit exceeded.
Cannot update IL data for module &1 in library &2.
NBRITV parameter can only be specified with OUTPUT(*FILE).
MBR parameter cannot be specified with OUTPUT(*).
LIB parameter cannot be specified with OUTPUT(*).
Refresh seconds not within valid range.
A value must be provided for either the CMD or CMDFILE parameter.
No records found in the source file member.
Logical files prevent conversion of data in library &1.
Performance collection files already exist in library &1.
Performance collection files are not downward compatible.
Target release option not valid.
Data compression option not valid.
Parameter SAVF required.
Performance collections from save file &1 in &2 not restored.
Performance collection &1 type &3 in &2 not restored.
Performance collection &1 type &3 in &2 not restored.
Performance collection &1 type &3 in &2 not restored.
Performance collection &1 type &3 in &2 not restored.
The resource object &1 was not found in the IFS.
Errors occurred while transforming resource object &3.
Font file &1 not found.
Font resource name &1 not recognized.
Invalid SCS data stream parameter was detected.
The font file cannot be embedded.
ENDIPX failed, QIPX job is in process of starting.
ENDIPX failed, QIPX job already ending.
Active IP over IPX interface &1 not changed.
Cannot start circuit &1.
SNA over IPX location in use by another job.
SNA over IPX location file version not valid.
SNA over IPX location already exists.
IP over IPX interface &1 not changed.
SNA over IPX location not found.
Name &1 not found.
OS/400 online information feature not installed.
Time-out occurred processing &1 command.
IP over IPX address already exists.
IP over IPX address file version not valid.
IP over IPX address in use by another job.
IP over IPX address not found.
Cannot start FSIOP circuit &1.
When SVCNETADR is specified, PVCLGLCHLI cannot be specified.
PVCLGLCHLI or SVCNETADR cannot be specified with FRAMETYPE or IPXNETNBR.
IP over IPX interface not defined.
Interface not the correct type.
IP over IPX support is not active.
IP over IPX interface &1 already started.
IP over IPX interface &1 already ended.
Maximum number of IP over IPX interfaces already active.
IP over IPX interface not found.
IP over IPX interface &1 in use by another job.
When ENBIW2 is *NO, IW2TMRRTY and IW2TMRITV cannot be specified.
Time-out occurred starting IP over IPX interface.
SNA over IPX job QAPPCIPX ended abnormally.
MPTN connection request rejected.
Cannot show work with display.
Time-out occurred activating IP over IPX support.
Time-out occurred deactivating IP over IPX support.
Errors occurred ending IP over IPX interfaces.
Cannot send configuration data to IP over IPX support.
Service name not correct.
Service name cannot be translated.
Service name cannot be translated.
Line description not found for IPX circuit &1.
Automatic configuration of network objects for IPX circuit &1 failed.
Error processing internal data request.
When ENBIW2 is *NO, IPXNETNBR must be specified.
Error creating Service Agent object - action required.
Activation password required if report remote problem is *YES.
Select information in SRVINF must be *ALL, *PRBID or *SAME.
Automated operational test schedule day not valid.
Automatic PTF monitor schedule day not valid.
Password not correct.
New password and verify password not the same.
Parameters CURPWD, NEWPWD, and VFYPWD required with TYPE(*MASTERPWD).
Parameter IGNPRB required with TYPE(*PRBLOG).
Parameter ACTION required with SUBTYPE.
Parameters SUBTYPE and DEVICE required with TYPE(*THRESHOLD).
Parameter CATEGORY required with SUBTYPE(*DEVICE).
Value for ACTION not valid for SUBTYPE(*DEVICE).
Parameter SYSREFCDE required with SUBTYPE(*SYSREFCDE).
Parameter values not valid.
Parameter values not valid.
Parameter AUTORPT required.
Parameter AUTORPT required with ENABLE(*YES).
Parameter CATEGORY required with TYPE(*DEVICE).
Parameter DEVICE required with TYPE(*DEVICE).
Parameter ERRLOGID required with TYPE(*PRDACTLOG).
Parameter SRVINF required with ENABLE(*YES).
Parameter SRVINF required with ENABLE(*YES).
Parameter DEVICE required with SUBTYPE(*SYSREFCDE).
Parameter SUBTYPE required with TYPE(*THRESHOLD).
Parameter RANGE required with SYSREFCDE(*RANGE).
LINECTL Configuration object value not valid.
ACTION(*CHG) required with SYSREFCDE(*RANGE).
Parameter ERRLOGID required with TYPE(*TSTPRB).
Parameter ACTPWD required with RPTRMTPRB(*YES).
Parameter ACTPWD required with TYPE(*ACTPWD).
Parameter MASTERPWD required with TYPE(*MASTERPWD).
Parameter BLKPRBRPT required with TYPE(*PRBRPT).
Parameter CRTJOBLOG required with TYPE(*JOBLOG).
Command STRSRVAGT TYPE(*ACTIVATE) not allowed in this setting.
Service Agent jobs in QSYSWRK subsystem not ended.
Electronic Service Agent not activated.
Electronic Service Agent not activated. QRETSVRSEC is 0.
Electronic Service Agent not activated. *IOSYSCFG special authority required.
Electronic Service Agent not activated. Required product not installed.
RPTENDTIME not after RPTSTRTIME.
Electronic Service Agent not activated. Contact information not configured correctly.
Electronic Service Agent not activated. Connection profile not configured correctly.
Incorrect number of parameters specified.
&1 not valid for service information.
An error occurred while attempting to access file &1.
Error processing API request.
Write operation not successful.

Length: 295538 Date: 20200923 Time: 004451

Count: 1483     sap01-206 ( 1940 ms ) This documentation is copyright by IBM.