OS/400 Messages

Are you looking for the description of OS/400 (System i) messages e.g. CPF9801? Then you have come to the right place. Below you can see a (hoefully) complete list of of all OS/400 messages with all “second level texts”.

Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43


Complete OS/400 Messages Documentation From CPDEF85 up to CPF1865

Complete OS/400 Messages Documentation From CPDEF85 up to CPF1865

This documentation is copyright by IBM.
Count: 1440 Skipped: 0
OS/400 Messages
Description
Error processing request.
Service information collection and transmission process &1 failed.
Service Agent communications have ended.
Error while locking &1 send status information.
Unable to allocate &1 service information file.
Error while connecting.
Error while changing file &1.
Error while closing file &1.
Service configuration not found - Action required.
Unable to connect with IBM.
Error while replacing &1 service information file.
Parameter IBMID required with TYPE(*USERAUTH).
A domain error in a math function occurred.
A range error occurred.
Data was truncated on an input, output or update operation.
File is not open.
File is not opened for read operations.
Input/output error.
No such device.
Cannot get single character for files opened for record I/O.
File is not opened for write operations.
The stdin stream cannot be opened.
The stream stdout could not be opened.
The stderr stream cannot be opened.
The positioning parameter in fseek is not correct.
The object name specified is not correct.
The type variable specified on the open function is not correct.
The position specifier is not correct.
There is no record at specified position.
Attempted to use ftell on multiple members.
The current record position is too long for ftell.
The value specified for the argument is not correct.
Function parameter in the signal function is not set.
No such path or directory.
Record is not found.
Operation not permitted.
Message data is not valid.
Resource busy.
Option specified is not valid.
File is not opened for update operations.
File is not opened for delete operations.
Number of characters written is shorter than expected record length.
An invalid length was specified for the key.
A read operation should not immediately follow a write operation.
A write operation should not immediately follow a read operation.
A non-recoverable I/O error occurred.
A recoverable I/O error occurred.
Permission denied.
Not a directory.
No space available.
Improper link.
Operation would have caused the process to be suspended.
Interrupted function call.
The address used for an argument was not correct.
Operation timed out.
No such device or address
Socket closed.
Possible APAR condition or hardware failure.
Recursive attempt rejected.
Address already in use.
Address not available.
The type of socket is not supported in this protocol family.
Operation already in progress.
Connection ended abnormally.
A remote host refused an attempted connect operation.
A connection with a remote socket was reset by that socket.
Operation requires destination address.
A remote host is not available.
A route to the remote host is not available.
Operation in progress.
A connection has already been established.
Message size out of range.
The network is not currently available.
A socket is connected to a host that is no longer available.
Cannot reach the destination network.
There is not enough buffer space for the requested operation.
The protocol does not support the specified option.
Requested operation requires a connection.
The specified descriptor does not reference a socket.
Operation not supported.
The socket protocol family is not supported.
No protocol of the specified type and domain exists.
The socket type or protocols are not compatible.
An error indication was sent by the peer program.
Cannot send data after a shutdown.
The specified socket type is not supported.
A remote host did not respond within the timeout period.
The protocol required to support the specified address family is not available at this time.
Descriptor not valid.
Too many open files for this process.
Too many open files in the system.
Broken pipe.
Operation canceled.
File exists.
Resource deadlock avoided.
Storage allocation request failed.
The synchronization object no longer exists because the owner is no longer running.
The synchronization object was destroyed, or the object no longer exists.
Operation terminated.
No such file or directory.
Object is already linked to a dead directory.
Directory empty.
Maximum link count for a file was exceeded.
Seek request not supported for object.
Function not implemented.
Specified target is a directory.
Read-only file system.
Unknown system state.
Iterator is invalid.
Iterator is in wrong state for operation.
Invalid HRI class.
Invalid HRI subclass.
Invalid HRI type.
Data requested is not applicable.
Invalid HRI request type.
Invalid HRI resource name.
A damaged object was encountered.
A loop exists in the symbolic links.
A path name is too long.
No locks available
Directory not empty.
System resources not available to complete request.
Conversion error.
Argument list too long.
Conversion stopped due to input character that does not belong to the input codeset.
Object type mismatch.
You attempted to reference a directory that is not found or is destroyed.
You attempted to reference an object that is not found, is destroyed, or is damaged.
Data space index used as a directory is invalid.
Object has soft damage.
User not enrolled in system distribution directory.
Object is suspended.
Object is a read only object.
Hard damage on extended attribute dataspace index.
Soft damage on extended attribute dataspace index.
Hard damage on extended attribute dataspace.
Soft damage on extended attribute dataspace.
Duplicate extended attribute record.
Area being read from or written to is locked.
Object too large.
The semaphore, shared memory, or message queue identifier is removed from the system.
The queue does not contain a message of the desired type and (msgflg logically ANDed with IPC_NOWAIT)
File ID conversion of a directory failed.
A File ID could not be assigned when linking an object to a directory.
File handle rejected by server.
No such process.
Process not enabled for signals.
No child process.
Invalid handle.
The operation would have exceeded the maximum number of references allowed for a descriptor.
Function not allowed.
Object is too large to process.
Journal damaged.
Journal inactive.
Journal space or system storage error.
Journal is remote.
New journal receiver is needed.
New journal is needed.
Object already journaled.
Entry too large to send.
Object is a Datalink object.
Independent Auxiliary Storage Pool (IASP) is not available
Inappropriate I/O control operation
Resolver Error 0 (no error)
Unknown host
Host name lookup failure
Unknown server error
No address associated with name or no data of requested type
Unknown resolver error
An attempt to write or truncate a file past its soft file size limit was encountered.
Text file busy.
ASP Group not set for thread.
The system call can be restarted.
Object marked as a scan failure
Error found on &1 command.
Command not run. Error detected by validity checker.
Internal string length &1 less than zero.
Returned command string exceeds variable provided length.
Errors occurred in command.
This message used internally only by command analyzer.
Value in option control block not valid.
Command &1 is not supported.
Error detected by prompt override program.
Positional list space cannot be extended beyond 16M bytes.
Work area space cannot be extended beyond 16M bytes.
Space cannot be extended beyond 32K bytes.
System not allowed to extend space.
Internal command analyzer error.
Internal command analyzer error.
Not authorized to add or remove exit program.
Value &2/&1 is not a valid name.
Maximum number of exit program entries reached.
Command allowed only for previous release compiles.
Command not eligible for exit program entry.
Removal of all exit programs entries not allowed.
Internal failure processing CALL command.
Value &1 not valid as system name.
Value of &1 for length of name field not valid.
The type &1 is not allowed or valid.
Command &2 not created in library &3.
Cannot open printer file.
Unable to open source file.
Length of data buffer is not valid.
Value for call stack counter not valid.
Limit of associated space size exceeded.
Operation not allowed for program &1 in library &2.
*USRLIBL not allowed with generic name or *ALL.
Program &1 in &2 not changed.
Program &1 in library &2 not changed.
User &3 not authorized to change &1.
Programs in libraries QSYS and QGDDM cannot be changed.
No programs changed.
&1 changed. &2 did not require change. &3 not changed.
Cannot remove observable information.
User &3 not authorized to change &1.
Date too short for specified format.
Separators in date are not valid.
Date contains misplaced or extra separators.
Date contains too many or too few numeric characters.
Variable specified too short for converted date format.
Date not in specified format or date not valid.
Date contains two or more kinds of separators.
Date outside allowed range.
Program &1 in &2 not a CL program.
Unable to retrieve CL source from CL program &2.
File &1 in &2 not a data base source file.
Record length too small for data base source file.
Unable to add data base member &3 to file.
Source from CL program &4 not retrieved.
Source not available for CL program &1 in &2.
Module &1 in library &2 not a CL module or has no CL source.
Module &4 not found in &3 &1 in library &2.
Module &4 in &3 &1 in library &2 does not contain CL source.
Unable to dump CL program &1 in &2.
Error occurred trying to retrieve CL source from module &4.
Internal space problems on extension of space.
Internal space problems.
PRTCMDUSG command ended by controlled end.
PRTCMDUSG command ended.
PRTCMDUSG command ended. Cannot open print file.
Not allowed to do operation to file &1 in &2.
File &1 already in library &2.
MODE value changed to *FIRST.
MODE value specified not allowed for file with DEV(*REQUESTER).
Device file &1 in &2 saved with storage freed.
Device file &1 in &2 not found.
File deleted by another job.
Specified user profile not available.
Not allowed to use specified user profile.
File &1 in &2 not available.
File &1 not created in library &2.
File &1 in &2 not changed.
User profile does not have enough storage assigned.
MAXRCDS specified is less than current number of records.
File &1 in library &2 not replaced.
Not allowed to duplicate save file &1 in &2.
File &1 in &2 not duplicated because error occurred.
STG(*FREE) ignored for save file &1 in &2.
RMTLOCNAME(*DEVD) not allowed with DEV(*LOC).
Not authorized to replace file &1 in &2.
Option &5 not allowed for device file.
Record format &2 not found.
Field &1 not found in record format &2.
Option &5 not allowed for file &3 in &4.
Data portion of save file &1 damaged.
&1 in Library &2 already exists.
Object reached maximum size.
File &1 not restored to library &2.
RMTLOCNAME(*REQUESTER) already specified for device file.
Device &3 for program device &4 not device type on command.
Device *REQUESTER already specified for device type.
Maximum number of devices specified for &1 in &2.
Program device name &4 not found.
Program device name already exists in file.
Device description &3 not found.
Device description &3 not same type as file.
Device type not same as add device entry command type.
Device description specified more than once in file.
Library &2 not found.
Command not allowed for file &1 in &2.
Printer overflow line number &5 is larger than page size &4.
Block length &4 less than record length &5.
Starting page number &4 is larger than ending page number &5.
Number of devices specified is &6. Maximum allowed is &7.
DEVTYPE(*USERASCII) not allowed with externally described file.
Not allowed to use device &3.
LVLCHK(*YES) ignored for program-described file.
Device description &3 not available.
Library &2 not available.
Not allowed to use library &2.
BSC or CMN device entries cannot be added to file.
CHRID command parameter is ignored for this file.
Operation not successful for file &1 in library &2.
Object &1 is not a printer file.
One or more record lengths larger than block length &2.
All record formats greater than block length &2.
Too many COLOR and DSPATR DDS keywords in file.
Subfile in file &1 in &2 too large.
Device file &1 in &2 is in use.
One or more record lengths larger than RCDLEN value &2.
All record formats greater than RCDLEN value &2.
Operation not performed for file name &1 in &2.
Object &1 is not a display file.
File &1 with OPNID &2 is not open.
File &1 in library &2 with open identifier &3 not closed.
CLOSE command cannot close the file.
File &1 in library &2 not found.
File &1 in library &2 not a source file.
Member &3 in source file &1 in &2 already exists.
Files have different record lengths.
Specified to-file same as from-file.
Command &1 cannot be converted.
Member has been converted.
Member &3 with correct type not found in file &1 in &2.
Keyword cannot be converted in command &1.
Syntax errors detected.
Statement may require manual conversion.
Previous start of program not ended.
&1 concatenations, &2 substrings may require manual conversion.
Expression in OPNQRYF command may require manual conversion.
Unable to allocate library &1.
Program &1 not created.
Depth of nested IF and DO commands exceeds 50.
Command definition previously deleted.
Built-in function operands not valid. Reason code &1.
Error found when program &1 in &2 started.
Error found when procedure started.
File containing compiler printout not opened.
Error in compiler-created code.
Transfer control (TFRCTL) to C program not allowed.
RTNVAR parameter has incorrect length for data area.
RTNVAR parameter type not valid for data area &1.
Value in data area &1 not logical value.
Licensed Program 5761-SS1 Option 9 not installed.
CL program &1 in &2 cannot be created for previous release.
%SWITCH mask &1 not valid.
Decimal variable too small to hold result.
Value cannot be converted to type implied by receiver.
Variable or substring of variable too small to hold result.
DBGENCKEY value must be *NONE for specified target release.
Program &1 not created.
Module &1 not created.
Subroutine stack overflow at statement &1.
Space addressing violation.
File override caused I/O buffer size to be exceeded.
File &1 in &2 not a data base file.
File &1 in library &2 is not a display file.
File &1 in &2 has no devices.
Value of binary data too large for decimal CL variable.
End of file detected for file &1 in &2.
File &1 has more than one record format.
Data area &1 not previously declared.
Data area &1 declared with different attributes.
Not authorized to data area &1.
Unable to allocate data area &1.
Data area &1 previously deleted.
Library &2 for data area &1 not found.
Data area &1 not found.
Not authorized to data area &1.
No corresponding RCVF or SNDRCVF command for WAIT command.
*FILE not valid in DEV parameter for file &1.
System command &1 does not exist for previous release.
System command &1 in library &2 is for TGTRLS(&3).
Record contains a data field that is not valid.
Data available from previous input request.
Command not run because job being ended.
No data available for input request within specified time.
PWRDWNSYS command issued by user &1 and is being processed.
Subsystem &1 in library &2 being started.
Unattended IPL in progress.
System pool &1 not deallocated or reduced in size.
Attended IPL in progress.
A duplicate job named &3/&2/&1 was found.
Serious storage condition may exist. Press HELP.
Machine ineligible condition threshold reached.
Ineligible condition threshold reached for pool &1.
Password not valid for system.
No authority to system console.
No authority to controlling subsystem description.
System time not valid.
System date not valid.
Allocation system values not used.
ENDSYS command in progress.
No password associated with user.
Subsystem &1 active when system ended.
Library in library list damaged.
All prestart jobs are ending for program &1 in &2.
Start Prestart Jobs command not allowed now.
End Prestart Jobs command not allowed now.
IPL changed to unattended mode.
Cannot use library in library list.
System object &1 created again during IPL.
Function check occurred in system arbiter.
Subsystem &1 ended.
Function check during system ending.
Function check during subsystem ending.
PWRDWNSYS command in progress.
ENDSYS command in progress.
Recoverable machine check. Error code &2.
Controlling subsystem ended unexpectedly. System is ending.
IPL completed.
Cannot use member name for object type *&2.
ENDSBS SBS(*ALL) in progress.
Machine check not recoverable. Error code &2.
Member locks option valid only for data base files.
Object &3 type &2 was not found in library &4.
PWRDWNSYS not allowed. Suspend in progress.
Objects of type *&2 cannot be allocated or deallocated.
Job &3/&2/&1 no longer in system.
File &3 in &4 member &1 not found.
Ending of subsystem &1 in progress.
No members exist in data base file &3 in library &4.
Library &4 not found for member &1 in file &3.
Only correct date or time can be converted.
Command not valid for Communications *DEVD.
Member &1 file &3 in library &4 not found.
Object type *&2 not valid object type.
&2 &3 in library &4 not found.
QSYS only valid library for object type &2.
Library &4 not found for &2 &3.
Library in library list previously deleted.
IPL changed to unattended.
IPL changed to unattended. Cannot use console.
All spooled files lost for job &3/&2/&1.
System may not be able to start new jobs. Press HELP.
&2 &3 in library &4 saved with storage freed.
Data base recovery failed. Press HELP.
IPL changed from unattended to attended mode.
Value for ASPDEV not valid with special value for library.
Object locks option not valid.
&3/&2/&1 job message queue lost.
Job &3/&2/&1 local data area lost.
User name does not exist.
Complete thread information not available.
Function check in operating system.
IPL options used.
&1 main storage units damaged.
No authority to IPL.
System ended to restricted condition.
Controlling subsystem ended to restricted condition.
Subsystem &1 ended.
System object &1 not found.
IPL program &1 not found.
System arbiter job did not start.
Sign on attempts exceed limit.
Console did not vary on.
Function check occurred during IPL.
All jobs in system lost. Job and output queues cleared.
Cannot run job &3/&2/&1.
Lock *EXCL not valid for object type *&2.
RCLSTG not run.
Lock *EXCLRD not valid for object type *&2.
Lock *SHRUPD not valid for object type *&2.
Lock *SHRNUP not valid for object type *&2.
Lock *SHRRD not valid for object type *&2.
Cannot allocate or deallocate &3 in library &4.
Library &1 in SYSVAL QSYSLIBL not found.
No authority to library &4.
Library &1 in SYSVAL QUSRLIBL not found.
Library &4 damaged.
No authority to member &1 file &3 in library &4.
USRLIBL parameter size is too small.
IPL changed to unattended mode.
No authority to object &3 in library &4 type &2.
Start of system to restricted condition in progress.
Start of controlling subsystem in progress during IPL.
ENDSBS SBS(*ALL) command being processed.
Subsystem &1 ending in progress.
Storage usage reached critical point and must be reduced.
Attended IPL after abnormal system ending.
Unattended IPL in progress after abnormal system end.
Function check detected in module &1.
Function check detected in system job QPFRADJ.
Time zone description &1 not changed.
Time zone description &1 not created.
Time zone description &1 not deleted.
An unexpected error occurred while converting a time stamp.
Performance monitor has already been submitted.
Performance monitor not started.
Performance data files are not upward compatible.
Performance data files are not downward compatible.
Error found during automatic performance data collection.
Data to be converted already at correct release.
Logical files prevent conversion of data in library &1.
Performance data files already exist in library &1.
Performance collection has already been submitted.
Performance data files did not convert.
Performance tools files did not convert.
Performance data files are from an unsupported release.
Performance tools files are from an unsupported release.
CRTPFRDTA ended. No files changed.
CRTPFRDTA ended. Files changed but data may be incomplete.
Values specified for LRSPTIME parameter not valid.
Value specified for HOUR or MINUTE parameter not valid.
Intermediate conversion files exist in library &1.
Values specified for RRSPTIME parameter not valid.
Empty or incomplete member in file QAPMCONF.
No Performance collections have been defined.
Performance collection is not active.
Performance collection not started.
Performance collections did not convert.
No active collection.
Start date/time is not within the range of collection
End date/time is not within the range of collection
The end date/time is before the start date/time.
No selected interval data produced.
No valid categories selected
Performance monitor is not authorized to file &4.
Performance monitor is not authorized to library &2.
Performance monitor not authorized to message queue.
User ID &1 does not exist.
Empty members were found in QAPMCONF in library &1.
Performance collection not ended.
Exit program &1 in library &2 failed.
Performance monitor not ended.
Exit program &1 in library &2 completed.
Performance tools files already exist in library &1.
Performance trace already started
Not able to process management collection object &1 in library &2.
Values specified for RRSPTIME parameter not valid.
Values specified for LRSPTIME parameter not valid.
Value specified for HOUR or MINUTE parameter not valid.
Ending time is not valid.
Performance monitor cannot be started at this time.
Values specified for JOBTYPE parameter not valid.
The performance monitor job &3/&2/&1 received a negative response on an RTM request.
Request type &1 not valid.
Resource type &1 not valid.
Interval time of &1 seconds not valid.
Collection &1 with format &2 not found in library &3.
Attribute with identifier &1 not found in collection.
Value for attribute with identifier &1 is not valid.
Attribute with identifier &1 cannot be changed.
Interval time of &1 seconds for IOP data not valid.
&1 seconds for communications data not valid.
Collection ended abnormally.
Data not available.
Collection not active for user.
Cannot copy data to user space &1.
Interval time of &1 seconds for disk data not valid.
User space &1 in lib &2 not large enough.
Invalid collection format &1.
This API should only be used with ASP group *SYSBAS.
Performance monitor &3/&2/&1 started at &4 &5.
Performance monitor &3/&2/&1 ended at &4 &5 with reason code &6.
Performance monitor &3/&2/&1 received wrong data from device &4.
Performance monitor &3/&2/&1 could not start.
Performance monitor failed to start trace.
Performance monitor or collector received time-out while waiting for data.
Internal interval time for performance monitor &3/&2/&1 greater than time allowed.
An error occurred in calculations for ISDN data.
Performance monitor received no data for bus resource measurement &6
The performance monitor received a negative response from controller &1 with sense data &2.
End performance monitor already submitted.
Performance monitor is not active.
Performance trace cannot be stored in database file.
ENDPFRMON command cannot be submitted at this time.
The performance monitor job &3/&2/&1 received a time-out on an RTM request.
Performance collection name is required.
Performance collection &1 already held.
Performance collection &1 already released.
Collection not added; conflicts with &1.
Collection not changed; conflicts with &1.
No performance collections
Performance collection commands are already in use.
Performance collection &1 not found.
Performance collection not added.
Ending time is not valid.
Collection not added; run-times conflict.
Collection not changed; run-times conflict.
Performance trace cannot be sent to database file.
Performance trace cannot be sent to database file.
Performance thread data not converted.
Member already exists.
User profile &1 is not authorized to library &2.
Performance collection &1 already exists.
Performance collection &1 not found.
Performance Collection &1 added.
Performance Collection &1 changed.
QPFRCOL not active.
Performance collection not changed.
Ending time is not valid.
Ending time is not valid.
Ending time is not valid.
Performance monitor &3/&2/&1 error.
Error on collection object &1 for category &3 data.
Probe failed for category &3.
Damage was encountered on internal job data structures.
Machine data collection suspended for category &3.
I/O data collection error for category &3.
Internal error occurred for category &3.
Data collection failed for user-defined category &1.
Repository &1 not found in a collection object.
Attempt to access unsupported repository.
Lock request was not satisfied in a specified time.
Collection Services not active.
Value specified for Number of units element of Collection retention period parameter not valid.
ARM support is not enabled.
Specified registered ARM application was not found.
Specified ARM application instance was not found.
Specified registered ARM transaction was not found.
Error on Change Management Collection (CHGMGTCOL) command.
Error on Change Management Collection (CHGMGTCOL) command.
Request selected in the I/O control block not valid.
Operation type selected in the I/O control block not valid.
Database I/O operation not valid
Record lock request selected in the I/O control block not valid.
Duplicate record key &3 found for record during SRM-DB operation
System Resource Management internal object &1 failed to create.
Buffer area too small to receive record from object &1 in library &2 with record key &3.
Request to provide records cannot be done.
Record key not valid for connection request.
Record not locked for update in object &1 in library &2.
No fibre channel adapter entries detected on the system.
Parameter specified on CALL QRZRECOV command not valid.
System Resource Management data object already in use.
System Resource Management record locked by another process.
Attempt to copy System Resource Management data failed.
Damage occurred on System Resource Management object &1.
Error occurred while accessing System Resource Management file &1.
System Resource Management internal objects not available due to internal failure.
Buffer not large enough to hold all requested SRM records.
System Resource Management object &1 not found.
Request for SRM data not valid.
The WRKHDWRSC command can not be run at this time.
Device not found.
Command not valid for this device.
System Resource Management record not found.
Resource no longer exists.
Resource no longer exists.
Unable to change mode for &1 because of reason code &2.
Mode successfully changed to &1.
Unable to satisfy requested locks.
Resource name hierarchy could not be retrieved.
Resource name hierarchy partially retrieved.
Internal failure in system. See previous messages.
Internal failure in system. See previous messages.
Operation request not valid. Internal failure in system.
Device information can not be located.
No hardware associated with device.
Conversion of SRM internal object &1 failed.
Damage occurred on SRM internal object &1 during conversion
Errors have occurred which prevent configuration upgrade from completing.
System Upgrade Program file member contains no records for resources.
A handle failed to create.
A handle was not deleted.
The handle is not valid.
The handle is in wrong state for operation.
Not a valid class.
Not a valid subclass.
Not a valid type.
Type and model information not valid or not on system.
Data requested by key &1 is not applicable
Resource name &1 is not valid
Resource name not found.
Search resource &1 not valid with key &2
Format &1 is not valid with Request indicator &2
Search resource &1 is not valid.
The reserved area is not set to binary zeros.
Class &1 is not valid with Subclass &2 and Request indicator &3
Request for SRM data not valid.
Unexpected error processing System Resource Manager (SRM) records.
The return code from the running of API &1 is &2
Class &1 Subclass &2 Request indicator &3 and Key &4 are not a valid combination.
Materialize request is not applicable to resource &1.
Materialize failed.
Hierarchical path supplied is not valid.
Number of keys &1 is more than number of keys allowed.
Access violation.
No cryptographic adapter entries detected on the system.
Not all network identification information could be found.
Damage occurred during SRM data base processing.
Product identifier &1 not valid.
Firmware product &1 not created.
Objects of type &1 cannot be created into an Independent ASP.
Input information parameter at offset &3 is not valid.
Products listed in Input List array not found.
Output List array too small.
Option &1 not valid.
Howmany &1 not valid.
Error occurred while processing QSZSLTPR API.
Object &1 type &3 already exists in library &2.
*&3 object already exists for product &4 release &5.
Registration identifier &7 not valid for product &4 release &5.
Damage occurred on object &1 in library &2.
Panel could not be displayed.
Requirements between parameters not satisfied.
Release level &1 not valid.
Load ID &1 not valid.
Error occurred during running of &1 API.
Product information not found.
Errors found by CHKPRDOPT.
Product &1 no longer properly installed.
Product &1 no longer properly installed.
Support could be lost for some products.
*&3 object already exists for product &4 release &5.
Product &1 no longer properly installed.
Length of product information not valid.
Product ID &1 not valid.
Registration identifier not valid.
Requested action not valid.
Error occurred while processing QSZSPTPR API.
Code load ID &1 not valid.
Errors found during digital signature verification.
Release level *ONLY not valid for product &1.
&1 not valid for number of supported operating system releases.
List of supported operating system releases not valid.
Target release &1 not valid.
Release &1 is not a valid operating system release.
Target release &1 is not a supported release.
Product &1 no longer properly installed because of RNMDLO.
Folder &5 for product &1 was restored.
Folder &5 for product &1 name changed to &6.
Product record not found.
Product availability object &2/&1 recovery required.
Cannot allocate object &1 in library &2.
Error occurred while processing object &1 in library &2.
Requested product already supported.
Product &1 release &4 option &3 code load must be supported before a language can be supported.
Requested product not supported.
Product &1 *BASE support cannot be removed.
Product definition &3 in library &4 not deleted.
*&1 already used by another product.
Data in product record not correct.
Registration ID problem with path.
Cannot add path name to *PRDLOD.
Cannot add duplicate path name to *PRDLOD.
Cannot add duplicate path name to *PRDLOD.
Directory in use.
Primary home directory already in *PRDLOD.
Duplicate primary product directory.
Specified product directory name not allowed.
Product directory not allowed.
Too many product directories specified.
Product directory is not in valid format.
Too many directories specified.
Symptom path match not found.
Failure occurred during problem data retrieval.
Product load &6 in library &5 not created.
Error occurred while creating product load &6 in library &5.
Previous level folder not specified.
Load identifier &4 not valid.
Duplicate library &5 specified.
Registration identifier not valid.
Library &1 not allowed.
Folder name not valid for code load.
Folder name not valid for language load.
Product option &1 not valid.
Product load type &1 not valid.
Number of additional libraries not valid.
Preoperation exit program information not valid.
Preoperation exit program library not valid.
Number of folders not valid.
Code load does not exist.
Folder name not correct.
More than one root folder specified.
Object name *LNG not valid for code load.
*CODE not valid for library.
Secondary language library not valid.
Duplicate folder &5 in folder list.
Additional development library &5 not found in code load.
Product definition object not found.
Length of folder name not valid.
Authority &1 not valid.
Secondary language library name required.
Minimum target release not valid.
Unexpected error occurred.
No language load defined.
Code load ID &9 not valid.
Code load &4 supported.
Specified load identifier not valid.
Product definition &3 not created in library &4.
Product identifier &1 not valid.
First product option not *BASE.
Language load identifier not valid.
Language load identifier not valid.
Duplicate language load identifier specified.
Language load not valid.
Duplicate option &3 specified.
Copyright dates not valid.
Registration identifier not valid.
Product identifier &1 not valid.
Value for reserved field not valid.
Product identifier suffix &1 not valid.
Copyright field &3 not valid.
Allow multiple releases field not valid.
Allow dynamic naming field not valid.
Language load field not valid.
Number of language loads parameter not valid.
Number of options parameter not valid.
Release date &3 not valid.
Message identifier &4 not allowed.
Code load ID &9 not valid.
Release date century field not valid.
Unexpected initialization error occurred.
Error initializing the XML parser.
Error found on XML input document.
Delete files not allowed for a packaged product.
Value &1 for function parameter not valid.
Not all components were successfully processed.
Requested function not successful.
Application information path name not valid.
Continuation handle is not valid.
Message file &5 in library &6 not found.
&1 not valid for repackage parameter.
&9 product loads packaged, &10 product loads not packaged.
&9 product loads packaged, &10 product loads not packaged. See job log.
Secondary language product load not packaged.
&1 not valid for allow change parameter.
Public authority for library &6 not valid for packaging.
Product &1 release &2 not packaged.
Primary folder list not correct.
Development folder list not correct.
Loads not packaged for product &1 release &2 option &3.
Product loads not packaged.
Code load has no folders.
Reserved fields in parameter 1 are not blank.
Unable to convert data to CCSID &1.
Object &5 in &6 type *&7 associated with PTF &8.
Object description not correct.
Exit program &5 in library &6 not found.
Packaging operation failed for &5 in &6 type *&7.
Product &1 release &2 option &3 load &4 already packaged.
Product &1 release &2 option &3 load &4 not packaged.
Load &4 for option &3 not in product definition.
Language load not packaged.
Product definition not found.
Code load not found for product &1 release &2 option &3.
Object &5 type *&7 in &6 not in development library &8.
Multiple releases available.
Product load not enabled for software agreements.
Software agreements enablement only valid for loads of type *CODE.
Number of software agreement documents specified is not valid.
Software agreement document name not valid.
Software agreements enablement only valid with minimum target release values after V5R2M0.
Directory list format not allowed.
Directory list maximum size exceeded.
*SERVICE authority is required to run this program.
Parameters specified for program not correct.
Internal operation failed.
Operation canceled by user.
Wait time expired for system response.
Cannot allocate object &1.
Subsystem &1 not active.
Function check occurred during start subsystem.
Objects not deallocated.
Current library cannot be specified.
Character is not valid for value &1.
Data area &2 not created.
Statistics elapsed time reset.
System value retrieval failed.
System value retrieval failed.
System value restore failed.
Network attribute retrieval failed.
Network attribute retrieval failed.
Network attribute restore failed.
Subsystem name &1 active.
Start subsystem failed for SBSD &1 in library &2.
No authority to start subsystem.
Subsystem &1 in library &2 not found.
Subsystem &1 not started.
Data area &1 in &2 not found.
No authority to data area &1 in &2.
ENDSYS not allowed when console powered or varied off.
No authority to change data area.
VALUE parameter not correct.
Operation on DDM data area &1 in &2 failed.
Subsystem &1 not started. ASP group &3 not available.
Not authorized to device &1.
VALUE parameter too long.
Library &1 not found for data area &2.
No authority to library &1 data area &2.
Data area &1 exists in &2.
TYPE and VALUE parameters not compatible.
LEN and VALUE parameters not compatible.
VALUE parameter must be '0' or '1'.
No authority to library &1.
&1 not valid for parameter SYSVAL.
No authority to library &1.
System value &1 cannot be changed.
Not authorized to library &1.
System ending with *CNTRLD option.
System ending with *IMMED option.
All subsystems ending with *CNTRLD option.
Subsystems ending with *IMMED option.
System powering down with *CNTRLD option.
System powering down with *IMMED option.
No authority to use command.
Class library &1 not found.
Maximum number of objects allocated on system.
Initial program or procedure cannot be specified.
Menu cannot be specified.
Boundary alignment for data area not valid.
AREA parameter not valid for data area.
CPYPTR parameter not valid for data area.
DTAARA(*GDA) not valid because job not group job.
Length not valid for data area &1 in &2
OUTFMT(*HEX) not valid for data area &1 in library &2.
Cannot allocate subsystem &1 in library &2.
SYSTEM(*RMT) not allowed for data area &1 in library &2.
Not enough storage to start subsystem.
Command can only be run in controlling subsystem.
ENDSBS *ALL not allowed in current environment.
Ending controlling subsystem &1 not allowed.
No subsystem &1 active.
Subsystem &1 ending with *CNTRLD option.
Subsystem &1 already ending with *IMMED option.
Subsystem &1 in library &2 damaged.
VALUE parameter not correct for system value &1.
Length of value not correct for &1.
ENDSBS *ALL not allowed in current environment.
Date not valid.
Time not valid.
Null string not valid as character value.
Cannot allocate data area &1 in library &2.
Class &1 exists in library &2.
Class &1 in library &2 not found.
Network attributes not changed.
Cannot allocate library &1.
Cannot allocate class &1 in library &2.
End of duplicate names.
Job &3/&2/&1 not found.
No authority to job &3/&2/&1.
DTAARA(*PDA) not valid because job not prestart job.
CHGPJ command is not allowed.
SYSVAL(QMONTH) not valid for Julian date format.
Job description &1 in &2 is not found.
Specified value not allowed for system value &1.
Not authorized to job description &1 in library &2.
System value &1 not changed.
Too many or too few values listed for &1.
Library &1 not found.
Controlling subsystem already ending to a single job.
Controlling subsystem already ending to single job.
Prestart jobs already are ending controlled.
Prestart jobs are already ending immediately.
Objects not allocated.
Subsystem &1 in &2 allocated to your job.
Substring not allowed for decimal or logical data area.
Starting position outside of data area.
Substring specified for data area not valid.
Current library cannot be QTEMP.
Function check occurred in system arbiter.
Cannot create data area &2 in library &1.
Override of file device type not valid.
CL variable not same type as system value &1.
CL variable length not valid for system value &1.
Service processor time of day function failed.
No authority to change certain network attributes.
No authority to class &1 in library &2.
Subsystem not started because system ending.
System value QRETSVRSEC cannot be changed from 1 to 0.
Subsystem &1 had a function check.
Function check occurred during start of subsystem &1.
Subsystem &1 started.
CPF1104 Job description not accessible.
CPF1105 Maximum number of jobs running in subsystem.
CPF1106 JOBD &1 in &2 has no default user.
CPF1107 - Password not correct for user profile.
CPF1108 USRPRF &1 not found for JOBD &2 in &3.
CPF1109 Not authorized to subsystem.
CPF110A Auxiliary storage pool group &1 not available.
CPF1110 Not authorized to work station.
CPF1111 Job description &1 in library &2 not found.
CPF1112 Not authorized to job description &1 in library &2.
CPF1113 Library in initial library list not found
CPF1114 Maximum jobs active for work station entry.
CPF1115 Group profile &1 cannot be allocated.
CPF1116 Next not valid sign-on attempt varies off device.
CPF1117 User &1 not accessible.
CPF1118 No password associated with user &1.
CPF1119 JOBD &1 in &2 specifies RTGDTA(*GET).
CPF111A System values not accessible.
CPF111B No operating system licenses available. Try again later.
System scheduled to power down.
System is powering down.
CPF1120 - User &1 does not exist.
CPF1121 Initial program or procedure cannot be specified.
CPF1122 Menu cannot be specified.
CPF1123 Function check occurred during sign on processing.
Job &3/&2/&1 started on &18 at &19 in subsystem &8 in &9. Job entered system on &20 at &21.&17
CPF1125 Current library cannot be specified.
CPF1126 Current library cannot be QTEMP.
Device specified for QPRTDEV not printer device.
CPF1128 Current library &1 not found
Cannot get current library from user profile &1.
Subsystem library list entry &3 not found.
Job not transferred. Cannot allocate job queue.
Name specified for system value &1 not valid.
CPF1133 Value &1 is not a valid name.
Job &3/&2/&1 priority &4 exceeds priority limit &5.
Job &3/&2/&1 output priority &4 exceeds priority limit &5.
CPF1136 Duplicate entries in library list for &1.
Console work station entry error. Controlling SBS ended.
VALUE parameter not valid type for data area &1.
Job description &1 in library &2 not found.
Sum of MINFAULT and JOBFAULT parameters exceeds MAXFAULT parameter.
Minimum size percentage exceeds maximum size percentage.
Private pool attributes not changed.
Range of parameter &2 does not include &4.
Job description &1 in library &2 not accessible.
Not authorized to job description &1 in library &2.
Specified program or procedure name is not valid.
Specified menu name is not valid.
Job queue &1 in library &2 not found.
Job queue &1 in library &2 not accessible.
User &1 not authorized to job queue &2 in library &3.
Job priority &1 exceeds limit &2 for user &3.
Output priority &1 exceeds limit &2 for user &3.
User name required in job description &1 in library &2.
Routing data specified for job invalid.
Library &1 duplicated.
Job switch value &1 not valid.
Library &1 not found.
User name &1 in job description &2 in library &3 not valid.
VALUE parameter too long for data area &1.
Job &3/&2/&1 job switch &4 not valid.
Shared pool &1 not changed to *NOSTG.
Cannot use RQSDTA(*RTGDTA) and RTGDTA(*RQSDTA) parameters together.
Cannot use RTGDTA(*RQSDTA) and RQSDTA(*NONE) parameters together.
Auxiliary storage pool group &1 not available.
Shared pool &1 not changed.
Job priority not changed.
&6M of &7M for pool definition &3 of subsystem &4 allocated.
Boundary alignment for data area &1 not valid.
AREA parameter not valid for data area &1.
Job &3/&2/&1 ended on &14 at &15; &10 seconds used; end code &8 &13.
Specified parameter not allowed for *MACHINE pool.
Specified parameter not allowed for *BASE pool.
ACTLVL not specified for pool &1.
CPYPTR parameter not valid for data area &1.
Class &1 in library &2 not changed.
Pool &2 not allocated.
Pool attributes not changed.
System pool &2 not deallocated.
Starting position outside of data area &1.
Subsystem &1 cannot find file &2 in library &3.
Subsystem &1 cannot open file &2 in library &3.
Subsystem &1 cannot start autostart job &2.
Subsystem &1 cannot start autostart job &2.
Subsystem &1 cannot start autostart job &2.
Subsystem &1 cannot start autostart job &2.
Subsystem &1 cannot start autostart job &2.
Subsystem &1 cannot start auto-start job &2.
Subsystem &1 cannot start auto-start job &2.
Subsystem &1 cannot start autostart job &2.
Subsystem &1 cannot start auto-start job &2.
Subsystem &1 cannot allocate job queue.
Subsystem &1 timed out when allocating job queue &2 in library &3.
Subsystem &1 cannot allocate job queue &2 in library &3.
Subsystem &1 cannot allocate job queue &2 in library &3.
Subsystem &1 cannot allocate job queue &2 in library &3.
Subsystem &1 cannot find work station &2.
Subsystem &1 cannot allocate work station &2.
Subsystem &1 did not allocate incorrect device &2.
Subsystem &1 varied off work station &3.
Subsystem &1 cannot start autostart job &2.
Subsystem &1 received an error for file &4 in library &5.
Subsystem &1 received an error for file &4 in library &5.
Substring specified for data area &1 not valid.
Subsystem &1 found an error for file &4 in library &5.
Subsystem &1 varied off work station &3.
Subsystem &1 trying to recover work station &3.
Subsystem &1 failed to vary off device &3.
Subsystem &1 has deallocated work station &3.
Cannot run job &3/&2/&1.
Specified user name not valid.
Subsystem &1 did not allocate incorrect device &2.
Value &1 specified for parameter is not valid.
Value &1 specified for parameter is not valid.
Value &1 specified for parameter not valid.
Immediate ending of subsystem &1 function checked.
Subsystem &1 ended.
Keyboard identifier &1 not correct.
CPF1204 Function check on initiate process with device.
Function check on initiate process without device.
JOBD(*USRPRF) and USER(*JOBD) cannot be used together.
Subsystem &1 was not started.
Value specified not valid.
Subsystem description &1 damaged.
CPF1210 Subsystem &1 ended abnormally.
Subsystem &1 cannot deallocate job queue &2 in library &3.
Subsystem &1 cannot start jobs from job queue &2 in &3.
Subsystem &1 had an allocation error for device &3.
Job &3/&2/&1 failed to start with error code &4.
&3/&2/&1 ended.
Subsystem is trying to recover work station &1.
IPL date and time value not permitted.
CPF1218 User QCE or QPSR cannot be used to sign on.
User QCE or QPSR cannot be used to sign on.
CPF1220 User &1 has reached device session limit.
Service processor failed.
Job queue &2 in library &3 allocated to subsystem &1.
&1 cannot be larger than &6M.
Subsystem &1 cannot start auto-start job &2.
SIZE not specified for pool &1.
Start prestart jobs failed.
No authority has been granted to use command.
Specified current library name is not valid.
Library QSYS not found in library list.
Subsystem &1 cannot start prestart job &2.
Subsystem &1 cannot start prestart job &2.
Subsystem &1 cannot start prestart job &2.
Subsystem &1 cannot start prestart job &2.
Subsystem &1 cannot start prestart job &2.
Subsystem &1 cannot start prestart job &2.
Subsystem &1 cannot start prestart job &2.
Subsystem &1 cannot start prestart job &2.
Subsystem &1 cannot start prestart job &2.
Subsystem &1 cannot start prestart job &2.
Subsystem &1 cannot start prestart job &2.
Subsystem &1 cannot start prestart job &2.
Subsystem &1 cannot start prestart job &2.
Job &3/&2/&1 ended abnormally.
Job &3/&2/&1 completed normally on &7 at &8.
Message queue &1 in library &2 not found.
Message queue &1 in library &2 not accessible.
User &1 not authorized to message queue &2 in library &3.
MSGQ(*WRKSTN) not valid. MSGQ(*NONE) used.
Message queue library &2 not found.
Subsystem &1 cannot start prestart job &2.
Subsystem &1 cannot start prestart job &2.
Subsystem &1 cannot start prestart job &2.
Job queue library &2 not found.
Subsystem &1 varied off work station &3.
Output queue &1 in library &2 not found.
Output queue &1 in library &2 not accessible.
User &1 not authorized to output queue &2 in library &3.
Output queue library &2 not found.
Subsystem &1 cannot start prestart job &2.
CPF1257 Unable to allocate output queue &1 in library &2.
CPF1258 Output queue &1 in library &2 not found.
CPF1259 Not authorized to output queue &1 or library &2.
Cannot allocate job description &1 in library &2.
Job description not found in library &2.
Group profile &1 cannot be allocated.
Job user &1 not authorized to job description &2 in library &3.
User profile for user name &1 not accessible.
Library &1 not accessible.
User &1 not authorized to library &2.
Maximum number of program start requests exceeded.
Maximum number of evoke requests exceeded.
Program start request received on communications device &1 was rejected with reason codes &6, &7.
CPF126A - Screen size is not valid to connect again.
Subsystem using default sign-on display file.
Unexpected function check occurred in LU Services (QLUS) job.
Error with device &1.
Internal object is damaged.
Communications device &2 was allocated to subsystem &1.
Subsystem &1 cannot allocate communications device &2.
Subsystem &1 cannot allocate device &2.
Internal object is damaged.
Process initialization parameter data invalid.
Incorrect number of parameters for program &1 in library &2.
Program &1 in library &2 does not accept parameters.
Unsuccessful attempt to call program without parameters.
Error received on communications device &2.
Communications device &2 cannot be used.
Subsystem &3 cannot start prestart job &6.
Number of process initialization parameters exceeds maximum.
Process initialization parameter data could not be received.
Program initialization parameter data is more than 2000 bytes long.
Subsystem &1 varied off work station &3.
Job queue &1 in library &2 damaged.
Transfer job is not allowed.
&4 not changed.
Job &3/&2/&1 cannot be transferred.
TFRBCHJOB command ended routing step in subsystem.
TFRJOB command ended the routing step.
Routing step started in subsystem &1.
Local data area of the submitter is damaged.
CPF1296 - Sign-on information required.
CPF1297 JOBD(*USRPRF) specified but profile defines no JOBD.
Storage limit or fragmentation while creating job structures.
Function check while creating job structures.
ACGDTA for &3/&2/&1 not journaled; reason &4.
System accounting journal cannot receive data; reason &1.
Accounting data for job &3/&2/&1 logged in history log.
Message queue QSYS/QSYSMSG full, damaged, or deleted.
Changing group job name not allowed.
Specifying GRPJOB(*NONE) not allowed at this time.
Group job &1 already belongs to this group.
Parameters that do not agree were found.
Subsystem cannot complete the &1 command.
Request to transfer to group job failed with reason code &1.
Job is not a group job.
Change group attribute request not valid; job not group job.
Value &1 for parameter &2 not allowed name.
Value &1 for parameter &2 not allowed.
Command &1 not allowed in this environment.
&1 in &2 not allowed as group message queue.
No response from subsystem for job &3/&2/&1.
Attention key program &1 in &2 not set.
This message used internally only by Work Monitor.
Only one selection allowed.
Job &1 user &2 job number &3 not found.
The End Group Job command not allowed at this time.
Group job &1 not ended; parameters do not agree.
Group job &1 not ended; parameters do not agree.
Group job &1 not ended; group job &2 does not exist.
Group job &1 does not exist.
Cannot end group job &1 with ENDGRPJOB.
No authority to use queue &2 in &3.
Message queue &1 in &2 not found.
Message queue &1 in &2 not available.
&1 in &2 not allowed as group message queue.
End of duplicate job names.
Disconnect Job (DSCJOB) command not allowed for this job at this time.
Must be an interactive job for requested change.
Job queue not changed. Job &3/&2/&1 not batch job.
Errors on CHGJOB command for job &3/&2/&1.
&3/&2/&1 not authorized to change parameters.
Errors occurred on SBMJOB command.
Job queue not changed. Job &3/&2/&1 not on job queue.
SBMJOB not allowed during IPL.
Job log output not changed.
Job &3/&2/&1 not completed.
Job control function not performed.
Reader or writer &3/&2/&1 not allowed as job name.
Current job not allowed as job name on this command.
Job &3/&2/&1 not valid job type for function.
Not authorized to control job &3/&2/&1.
Cannot hold job &3/&2/&1.
Job &3/&2/&1 already held.
Cannot hold job &3/&2/&1.
Job &3/&2/&1 held but unable to hold its files.
Job &3/&2/&1 not released, the job is not held.
Job log server not started.
Job log server not ended.
SPLFILE(*NO) specified but job &3/&2/&1 on OUTQ.
Function check occurred in subsystem for job &3/&2/&1.
Function not done. &3/&2/&1 in transition condition.
DSCJOB command not allowed for this job now.
DSCJOB command not allowed for this job now.
DSCJOB command not allowed for this job.
Job not transferred.
DSCJOB not allowed.
ENDJOBABN not allowed at this time for job &3/&2/&1.
Errors occurred on ENDJOB command.
ADLINTJOBS parameter not valid.
Subsystem ended with system request job counter errors.
ENDJOB OPTION(*IMMED) not allowed at this time.
&3/&2/&1 already ending because of ENDJOBABN.
Job &3/&2/&1 already ending with *IMMED option.
Job &3/&2/&1 has completed.
Job &3/&2/&1 is already ending *CNTRLD.
Job not transferred. Job queue &1 in library &2 not active.
Job not transferred. Subsystem &1 ending.
Subsystem &1 has no usable work station entry for &2.
User &1 not authorized to subsystem &2
&1 not authorized to job queue &2 in library &3.
Job queue &1 in &2 not found.
Job &3/&2/&1 not active.
Job &3/&2/&1 in use.
Value &2 for activation group number not valid.
Job queue &1 in &2 not accessible.
Subsystem ended with job counter errors.
Job not transferred. Job currently being ended.
Job not transferred. System request in effect for job.
BCHJOB command not valid in current environment.
Job not transferred. Single active job not allowed to transfer.
Library on library search list deleted.
Library on library search list damaged.
Job &3/&2/&1 not held at current time.
Job &3/&2/&1 cannot be changed.
Not authorized to change system job.
Transfer to secondary interactive job not valid.
Transfer to secondary interactive job not valid.
Transfer to secondary interactive job not valid.
Transfer to secondary interactive job not valid.
Transfer to a secondary interactive job not valid.
Disconnect Job (DSCJOB) command not allowed for this job at this time.
DSCJOB is not valid.
DSCJOB is not valid.
DSCJOB command not allowed at this device.
Disconnect Job (DSCJOB) command not allowed for this job at this time.
CPF1390 User &1 cannot connect again at this time.
DSCJOB command not allowed for this job now.
CPF1392 Next not valid sign-on disables user profile.
User profile &2 has been disabled.
CPF1394 User profile &1 cannot sign on.
CPF1395 Not able to allocate object &1 of type *&3 in &2.
CPF1396 Not able to allocate system resources now.
Subsystem &1 varied off work station &3 for user &8.
Subsystem &1 varied off work station &3.
Subsystem &1 deallocated work station &3.
Value &1 for job information length parameter not valid.
Value &1 for initial job setting parameter not valid
Value &1 for user profile not valid.
Value &1 for run priority not valid.
Value &1 for pool not valid.
Value &1 for program name not valid.
Value &1 for suppress messages not valid.
Value &1 for wait for job initiation not valid.
Subsystem description recovery in progress.
Subsystem description recovered. Some contents may be lost.
Subsystem description &1 in &2 damaged.
Active subsystem description may or may not be changed.
Cannot allocate subsystem description &1.
Error during allocation of subsystem &1.
Previous request pending for subsystem &1.
Subsystem description &1 not found.
Job description &1 found in library &2.
File &1 found in library &2.
Program &1 found in library &2.
Class &1 found in library &2.
Job queue &1 found in library &2.
Output queue &1 found in library &2.
Job description &1 in library &2 damaged.
Subsystem description &1 in library &2 damaged.
Job schedule entry &3 number &4 not changed.
Job description &1 not created in library &2.
Job description &1 created but warnings exist.
Job description &1 not displayed.
Subsystem description recovered. Some contents may be lost.
Job description &1 in library &2 not changed.
Job description &1 changed, but warnings exist.
Job schedule entry &3 number &4 not found.
Not authorized to job schedule &1.
Not authorized to job schedule entry &3 number &4.
&3 entries successfully removed, &4 entries not removed.
Job schedule entry &3 number &4 damaged.
Job schedule entry &3 number &4 not added.
Specified date or time has passed.
Requested change no longer allowed.
More than one entry with specified entry job name found.
Job schedule &1 in library &2 in use.
Job schedule entry &3 number &4 in use.
Date &5 in job schedule entry not correct.
Job schedule &1 in library &2 does not exist.
Job schedule &1 in library &2 damaged.
Schedule date &1 not correct.
Job schedule entry name not valid.
Scheduled date and time not changed.
No job schedule entries found for specified name.
Entry number must be *ALL when generic name specified.
&3 entries successfully held, &4 entries not held.
&3 entries successfully released. &4 entries not released.
Entry number must be *ALL.
Both scheduled date and time must be changed.
Sort sequence table not accessed.
CPF1652 - *ALLOBJ and *AUDIT authorities required to sign on.
Activation group &1 not found.
Activation group &1 cannot be deleted.
Format not valid.
Disconnect job not allowed for test request jobs.
Number of entries not in valid range
Active subsystem description may or may not have changed.
Subsystem description &1 not displayed.
Subsystem description displayed, but warnings exist.
Subsystem description &1 not created.
Subsystem description &1 not changed.
Subsystem description changed, but warnings exist.
Subsystem description &1 created, but warnings exist.
Error while processing job &3/&2/&1.
Device &1 not correct device type.
Command cannot be run.
File &1 in library &2 not database file or DDM file.
Reading job &3/&2/&1 from volume &4.
First command must be //BCHJOB command.
Incorrect use of // in job &3/&2/&1.
Syntax check request ignored.
Submit jobs command not allowed.
&1 jobs submitted. &2 jobs not submitted.
Reading job &3/&2/&1.
Cannot allocate one or more libraries.
Writer already started for device &1.
Function check while processing cleanup of ended subsystem.
Function check while processing end subsystem.
Function check while processing system ending.
Subsystem &1 in library &2 starting.
System value &1 changed from &2 to &3.
System value &1 changed from &2 to &3.
Value &1 may not have changed from &2 to &3.
System value &1 may not have changed.
System value &1 has duplicate library &2.
System value &1 changed.
Function &1 not allowed.
Function &1 not allowed.
Function &1 not allowed.
&4 not changed.
System value &1 changed.
System value QUSRLIBL has duplicate library &2.
Duplicate library &2 in system value QSYSLIBL.
Object &2 not found for system value &1.
&2 in &3 not found for system value &1.
Cannot allocate libraries for system value &1.
System value &1 changed from &2 to &3.
System utility power failed at &2.
System utility power restored at &2.
System ending. Power failure notification failed.
System ending. Power failure message not monitored.
System power failed at &2.
QMAXJOB cannot be less than &1.
Power failure. System ending. Restart IPL will be ignored.
Message queue &1 in &2 not found.
System value &1 changed from &2 to &3.
System value &1 may not have been changed from &2 to &3.
System value &1 minimum is &6M.
Function check occurred in QLUS.
LU services (QLUS) job initiation failed.
QLUS job ending unexpectedly.
Value specified for system value &1 not valid.
Specified values not valid for system value &1.
User not authorized to change system value &1.
Cannot change system value &1 during IPL.
Display Active Prestart Job command is not currently allowed.
Prestart job entry for program &1 in &2 does not exist.
Not authorized to subsystem description.
Not allowed to change base pool size.
Not allowed to change machine pool activity level.
Automatic install did not complete.
User not allowed to print system value information
*ALLOBJ and *SECADM authorities required.
Not authorized to group profile.
Error found while processing pool &1.
Cannot access system value &1.
System job &1 failed to start.
Cannot access network attribute &1.
System value &1 changed. Warnings exist.
Request did not complete. System value not available.
Cannot access system control block.
Century digit &1 not valid
Millisecond or microsecond value not valid
CHGJOB did not complete. System object not available.
Format &1 not valid
Job not started. System value not available.
System value &1 not changed.
System value &1 and &4 changed.
Value &1 for CCSID not valid.
System subsystem &1 not started.
Filter type &4 not correct for system value &1.
Specified value for &1 not a code font.
The specified pool does not exist.
Use of an access path was requested but none exists.
Value &1 in list not valid.
Length of the receiver variable not valid.
Number of values to retrieve not valid.
Length of value not valid.
User not authorized to change system value &1.

Length: 276930 Date: 20200927 Time: 031032

Count: 1440     sap01-206 ( 1037 ms ) This documentation is copyright by IBM.