OS/400 Messages

Are you looking for the description of OS/400 (System i) messages e.g. CPF9801? Then you have come to the right place. Below you can see a (hoefully) complete list of of all OS/400 messages with all “second level texts”.

Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43


Complete OS/400 Messages Documentation From CPF1865 up to CPF2806

Complete OS/400 Messages Documentation From CPF1865 up to CPF2806

This documentation is copyright by IBM.
Count: 1414 Skipped: 0
OS/400 Messages
Description
Value &1 for job type not valid.
Value &1 for number of fields to return not valid.
Value &1 in list not valid.
Value &1 for number of records not valid.
Value &1 for reset status statistics not valid.
Selection information not allowed with format &1.
Pool &1 not active.
Selection information required with format &1.
Pool &1 not active.
Value &1 for type of tuning not valid.
Value &1 for change page handling not valid.
Value &1 for blocking factor not valid.
Value &1 for exchange operation not valid.
Value &1 for transfer to auxiliary storage not valid.
Value &1 for change request length not valid.
Value &1 for pool number not valid.
Incorrect format specified.
Library name not valid.
Paging option &1 not valid.
List of active subsystems not available.
Machine pool paging option cannot be changed.
Changing private pool paging option not allowed.
Value for paging option not valid.
Value &1 specified for parameter not valid.
Value &1 specified for parameter not valid.
JOB *SYS only valid if SBS *ALL.
User not authorized to change IPL attributes.
Error occurred changing IPL attributes.
Disk reorganization for ASP &1 already started.
Disk reorganization not active for ASP &1
Must be an interactive job for requested change.
System value not available.
Both scheduled date and time must be changed.
Not authorized to job description &1 in library &2.
Not authorized to change job accounting code.
*ALLOBJ authority required for requested operation.
Disk reorganization cannot be started on an ASP with only one unit.
Function &1 not allowed.
Errors occurred while changing job &3/&2/&1.
Incorrect format specified with internal job identifier.
Incorrect job name specified.
Data for key field &1 not valid.
Key field &1 not valid.
No other key allowed when specifying key &1.
Reserved field must be blank.
Length field not valid.
&1 not valid for the data type field.
Must be an interactive job for requested change.
Key field &1 not valid with format &2.
Request not completed.
Object type field not valid.
Member name is not valid.
Path parameter not specified.
Error occurred.
User not authorized to change system value &1.
Thread-scoped lock not valid for object type *&2.
Error occurred during set profile to profile token.
Balance function running for ASP &1 with name &2.
Balance type not valid for ASP &1 with name &3.
&1 cannot be changed in partition.
Length of program data not valid.
Length of request handler information not valid.
No response received.
Error occurred with job.
Error occurred with prestart job.
Error occurred with subsystem.
Function not allowed.
Request handler type not valid.
System resource not available.
Data area &1 not changed because entry not journaled.
Thread &1 not found.
System value &1 cannot be changed.
CPF18C1 - System value cannot be changed.
Object lock handle or lock request handle not valid.
Exit Point Program &1 cannot enter restricted state.
User not authorized to change system value &1.
Time adjustment value not valid.
System value &1 changed from &2 to &3.
PWRDWNSYS not allowed to continue.
Wait time expired for user exit program &1.
System value &1 changed from &2 to &3.
Daylight Saving Time adjustment not completed.
An error occurred while calling a user exit program.
Job can not be interrupted.
User not authorized to change system value &1.
Resume breakpoint in progress.
No default program exists.
Program &1 not active in the OPM debug environment.
Command not valid at this type of breakpoint.
Starting position parameter is not valid.
Command is not valid. No programs in debug mode.
Last request at level &1 ended.
Maximum number of traced statements reached.
Maximum number traces defined must be greater than &1.
Not authorized to debug program &1 in library &2.
You cannot have more than twenty programs in debug mode.
Program &1 in library &2 cannot be accessed.
Program &1 already in debug mode.
Program &1 in library &2 not observable.
Length parameter is not valid.
Required debugging tables do not exist in program &1.
Command is not valid for bound programs.
Program name &1 specified more than once.
Recursion level parameter is not valid.
Statement identifier &2 not found in program &1.
Instruction number &2 not in program &1.
Variable &3 not found in program &1.
ODV number &3 not found in program &1.
Invalid ODV number from symbol table for variable &3.
Instruction number not valid for program &1.
Variable &3 in program cannot be found.
Output format name not valid.
Instruction number &2 invalid for statement identifier.
ODV number &3 for variable is not correct.
STMT(*) not valid.
Command not valid at this time.
Requested level not correct.
Breakpoint not removed.
Attributes of subscript variable &3 in program &1 not valid.
No breakpoints defined for program &1.
STRDBG is not allowed because job is being serviced.
Command is not allowed while serviced job is not active.
Time-out occurred waiting for a reply from the serviced job.
This message used internally only by test/debug.
Serviced job has completed. Debug commands are not allowed.
ENDSRVJOB is not allowed while debugging.
Variable &3 in program &1 is not correct type.
Variable &3 in program &1 is not a pointer.
Variable &3 in program &1 requires basing pointer.
Pointer not allowed for variable &3 in program &1.
No call of program &1 for recursion level &2 for variable &4.
Subscript number &2 for variable &7 outside range.
BKPCOND variable &3 in program &1 is not correct type.
No program variable exists for the corresponding BKPCOND variable.
PGMVAR must be specified if BKPCOND is specified.
PTRTYPE(*SAME) not correct for existing value of pointer &3.
OFFSET parameter not allowed because &3 not a space pointer.
Subscript &3 was not correct.
No operator was specified on the BKPCOND parameter.
&1
Breakpoint already run when notification received.
VALUE plus starting position too large for variable &4.
Length plus starting position values too large for variable &4.
Breakpoint already run when notification received.
Starting position value larger than length of variable &4.
Numeric value not correct for character string variable &3.
VALUE beginning X'&2' invalid for decimal variable &3 in program &1.
More than &2 fractional digits in value for variable &4 in program &1.
VALUE parameter value not correct for numeric variable &3 in program &1.
This job is no longer being debugged.
This message used internally only by testing component.
Parenthesis that are not correct specified for variable &3.
No space exists in SYSOBJ. Pointer &3 not changed.
Cannot access system object &1 in library &2 type &3.
OFFSET value not correct for pointer &3.
Pointer alignment error for variable &3.
Variable &3 in program &1 refers to deleted object.
Variable &3 in program refers an object with freed storage.
Object type &1 not valid symbolic type.
Basing pointer &3 in program not set to any address.
Number of trace ranges for program &1 exceeds five.
No trace ranges in program &1.
Specified range &2 cannot be traced.
Maximum number of trace points processed. All trace ranges removed.
Trace range &2 not removed.
Basing pointer &3 not space pointer in program &1.
Space addressing error for variable &3.
Domain violation occurred for variable &3.
&1 is not a user state program.
No argument to match parameter for variable &3.
STRDBG command not allowed in thread capable job.
Threads debugging not supported for job.
Internal debug error.
No trace data to clear or display.
Program &1 not activated for variable &3.
Program &1 not called for variable &3.
Ending the current request cannot be done now.
Errors occurred on command.
Internal debug error.
Internal error accessing thread debug information. Function was &1, error &2.
Alert table &1 in &2 cannot be extended.
Alert code &1 already in alert table &2.
Alert identifier &1 already in alert table &2.
Alert code &1 not found in alert table &2.
Alert table &1 in &2 damaged.
Exponent out of range on floating point conversion.
Line description &1 does not exist.
Error occurred while getting configuration information.
Line &1 is not in proper state for test.
Two-wire coupler not installed.
Coupler not installed.
Transmit speed cannot be changed.
DTE port selected not valid for configuration.
Test cannot be run on line &1.
Line &1 failed during test.
No response received for test request.
Test cannot be run on line &1.
Error occurred while processing VFYLNKLPDA command.
Test cannot be run at this time.
Test request failed. Test already active on line.
Line &1 did not vary on.
Local DCE received no response from remote DCE.
Not authorized to line description &1.
Format of response received not valid.
Received response with bad frame check sequence.
Line &1 cannot be varied off at this time.
Line description &1 does not exist.
Line &1 not active or not varied on.
Line &1 is active secondary.
Line &1 failed while processing RUNLPDA.
No response received for LPDA-2 command.
Cannot run LPDA-2 command on line &1.
No buffers available for RUNLPDA data.
LPDA-2 command already active on line &1.
Line &1 vary off failed.
LPDA-2 command cannot run in switched network backup.
LPDA-2 command not supported by target DCE.
Required feature not installed.
LPDA-2 command not compatible with DCE configuration.
Error occurred while processing VFYLNKLPDA command.
Coupler not installed in local DCE.
Coupler not operational.
LPDA-2 command not valid with configuration options.
Telephone number not valid.
Switched connection already active.
Only single telephone number allowed.
Two telephone numbers required.
No answer from remote DCE on first call.
No answer from remote DCE on second call.
Continuous answer tone received for first call.
Continuous answer tone received for second call.
No line signal on switched connection.
No initial dial tone.
No dial tone after pause.
Busy tone received from remote DCE.
Unexpected data received from DCE.
Error detected while processing VFYLNKLPDA command.
Test cannot run in switched network backup mode.
Requested test is not supported.
Required feature not installed.
Required feature not operational.
Test is not compatible with DCE configuration.
DTEPORT parameter cannot be specified.
Local DCE received no response from remote DCE.
Received response with bad frame check sequence.
Format of response received is not valid.
Test cannot be run at this time.
DCE self test failed.
Sense byte returned is not valid.
No remote DCE response is available.
Line description &1 is not *SDLC.
System Service Tools is active.
DCE currently processing previous LPDA-2 command.
Not authorized to line description &1.
Cannot send command to remote DCE.
Line description &1 not nonswitched *SDLC.
VFYLNKLPDA command does not support switched lines.
Request failed. System service tools active.
RUNLPDA command does not support switched lines.
Error occurred processing RUNLPDA command.
Internal processing error.
Required feature not operational.
Ring back limit exceeded.
DCE busy. LPDA-2 command cannot be run.
Line not in proper state for LPDA-2 call out command.
Unable to continue online education.
Cannot allocate course.
Cannot allocate student information.
Audience path being changed or removed.
Maximum number of students using the audience path.
Not authorized to use CVTEDU command.
Cannot allocate course &1.
Errors occurred during command processing.
Not authorized to remove bookmarks.
Not all bookmarks removed.
Course not found.
Cannot display menu &1.
Cannot remove user &1.
Problem occurred while calling Operational Assistant.
Power schedule and cleanup options set to defaults.
Power on or off cannot be scheduled within 30 minutes of another power on or off.
Power schedule or cleanup options in use by another user.
Error occurred creating cleanup and power on/off schedule object.
Error occurred while powering off.
Cannot change a date or a time that has passed
Not authorized to change power on/off schedule.
Cannot print schedule at specified STRDATE.
Unexpected error in QSYSSCD job.
Power scheduler and cleanup options not found.
Error occurred scheduling next power on and off.
Scheduled power off job cannot start.
User cleanup program &1 not found in library &2.
Not authorized to change cleanup options.
Cleanup options or power schedule in use by another user.
Error occurred starting &1 job.
Not authorized to end cleanup.
Cleanup has not been started.
Cleanup has already been started or is scheduled to run.
Cleanup not allowed to run.
Not authorized to job queue used for cleanup.
Not authorized to start cleanup.
Scheduler job, QSYSSCD, is not running.
Job queue &2/&1 not found.
Library &1 for JOBQ parameter not found.
Cleanup not run. Job queue &1 or library &2 not found.
Power off did not occur. Job queue &1 or library &2 not found.
Operational Assistant (OA) function already active.
Not authorized to change system options.
Not authorized to change passwords for IBM-supplied users.
Not all jobs displayed.
Job queue &1 in library &2 not found.
Not authorized to hold job &1.
Job &1 has ended and cannot be held.
Job &1 cannot be held.
Not authorized to do request.
Not authorized to add this type of user.
You cannot give more authority than you have.
Error occurred while checking backup authority.
Parameter value &1 not valid for program &2.
Library backup list in use.
No user libraries selected for backup.
Backup options and library backup list damaged.
Backup incomplete.
Error occurred while initializing tape.
Job description QEZBACKUP not available.
Folder backup list in use.
Backup options in use.
Folder backup list damaged; new one created.
Nothing selected for backup.
Tape set name &1 is not valid.
Device &1 not found.
Controller &1 not found.
Make unavailable may not have completed.
&1 cannot be made available.
&1 cannot currently be made unavailable.
Not authorized to &1 command.
&1 cannot currently be renamed.
Not authorized to device &1.
Controller &1 being renamed or deleted.
No controller for device &1.
No message to display. See system operator messages.
Controller &1 damaged.
Make available request may not have completed.
Line &1 damaged.
&1 already exists.
Not able to get all information from line &1.
Not able to get all information from device &1.
Not all addresses printed.
Line &1 not found.
No message to display.
Device &1 damaged.
Not authorized to controller &1.
Not authorized to line &1.
No message to display; press F5 (Refresh).
Cannot display message.
Not authorized to display message.
No message to display; press F5 (Refresh).
Message not found.
Value specified for parameter &2 not allowed.
Option 50 cannot contain information if N specified.
Cannot display message now. Try again later.
Not authorized to display message.
User name &1 does not exist.
Printer &1 not found.
QAEZDISK file not at correct level for printing disk space report.
Unexpected error occurred.
Library &1 for INFLIB parameter not found.
Not authorized to send message to *ALL or *ALLACT.
User name parameter is not valid.
Display station parameter is not valid.
Include disconnected jobs parameter is not valid.
Include signed-off users with output parameter not valid.
Cannot sign yourself off using option 4.
User &1 already signed off.
Delivery mode must be *BREAK or *NORMAL.
Value for length of message text must be 0 through 494.
Number of user profile names not valid.
Value for number of user profile names must be 0 through 299.
Program &1 cannot be run as a batch job.
*ALL not allowed with other user profile names.
Value &1 for name type indicator not valid.
Value &1 not valid for list of user profile names.
Parameters passed on CALL do not match those required.
Value &1 not valid for list of display station names.
At least one user or display station must be specified.
Message text cannot be blank.
Display station names cannot be used with the Send a Message display.
Value for Use "Send a Message" display not valid
Job schedule in use by another user.
Not authorized to job schedule &1 in &2.
Cannot collect information weekly and monthly.
Not authorized to Backup Schedule.
Cannot display Backup Schedule.
Backup option &1 is not valid.
Value &1 for run backup not valid.
The length &1 is not valid when the specified type is &2.
Value &1 for hours before backup not valid.
Value &1 for occurrence of week not valid.
Current collection of disk space information not found.
Not authorized to collect disk space information.
File &1 is in use and cannot be accessed.
Current collection of directory information not found.
Not authorized to collect directory information.
File prefix &1 or library &2 not found in QAEZDBFILE.
File &1 in library &2 not found.
Error occurred retrieving directory information.
&1 objects processed. &2 objects not processed.
Retrieved directory information not complete.
Device &1 specified more than once.
Tape set name &1 specified more than once.
Cannot specify *ANY and a tape set name.
Not authorized to backup options.
Not authorized to run backup.
Device &1 not a tape device.
Devices specified cannot be used.
Unexpected error occurred during backup.
Unexpected error from exit program &2/&1.
Not authorized to library backup list.
Not authorized to folder backup list.
Not authorized to file &1.
Directory name not valid.
Directory not found.
New directory name same as old directory name.
Directory name already exists.
Directory handle not valid.
Directory in use.
Authority not sufficient to access directory.
Damaged directory.
Use of reserved directory name not allowed.
Delete directory operation not allowed.
File name not valid.
File not found.
New file name same as old file name.
File name already exists.
File handle not valid.
File in use.
Authority not sufficient to access file.
Damaged file.
Use of reserved file name not allowed.
Number of open files exceeds limit.
Write operation not allowed to file opened for read only.
Read operation not allowed to file opened for write only.
File pointer position not valid.
Range of bytes in file in use.
Unlock range of bytes in file failed.
Number of locks on file exceeds limit.
Attempted write operation beyond file size limit.
Read file operation failed.
Write file operation failed.
File is a read-only file.
Severe error occurred while addressing parameter list.
Attribute information table not valid.
Attribute name not valid.
Attribute value is not valid.
Attribute selection table not valid.
Use of reserved attribute name not allowed.
Buffer overflow occurred.
Path name not valid.
Open information value not valid.
Value for number of directory entries not valid.
Value for number of bytes not valid.
Lock information value not valid.
File offset value not valid.
Move information value not valid.
Distance to move value not valid.
Copy information value not valid.
Error code not valid.
Value for length of data buffer not valid.
No free space available on media.
Requested function failed.
Media is write protected.
Storage needed exceeds maximum limit for user profile &1.
Exception specific to file system occurred.
Internal file system error occurred.
Not authorized to use command.
Not authorized to object.
Error occurred during start-job-session function.
Error occurred during end-job-session function.
Severe parameter error occurred on call to file system.
API specific error occurred.
Function not supported.
File system name &1 not found.
Operation across file systems not allowed.
Not authorized to file system &1.
Force all files did not complete successfully.
Missing or damaged exit program &2.
Unable to complete copy or move operation.
File system name not valid.
File system &1 not registered.
File system &1 already registered.
Exit program &2 not found.
Required exit program not specified.
Version level &2 not valid.
File system &1 in use.
Registration or deregistration cannot be done now.
Register information value not valid.
Exit program list not valid.
Reregister or deregister file system failed.
File &1 not found on the available virtual optical volumes.
Object type &1 not valid.
Object type and subtype code &1 not valid.
Library &1 already exists in library list.
Library &1 not removed from the library list.
Object &1 in &2 type *&3 not found.
Library list not available.
Library not cleared or deleted. Function check occurred.
Object &1 type *&3 not added to library &2.
NEWOBJ must be *SAME when OBJ parameter is *ALL or generic name.
Cannot reclaim library &1.
Attempt to reclaim library &1 failed.
Library &1 not changed.
Library &1 in use.
Library &1 not available for reason code &2.
Object &1 type *&3 not deleted from library &2.
Library &1 not found.
Library &1 already exists.
Object &1 in &2 type *&3 already exists.
Cannot allocate library &1.
Cannot allocate object &1 in &2 type *&3.
Object &1 in &2 type *&3 damaged.
DATA(*YES) specified and *ALL or *FILE not in OBJTYPE list.
&4 objects type *&3 deleted. &5 objects not deleted.
Library &1 not added.
Library &1 locked.
Object *ALL not allowed for library &1.
Library &1 locked.
One or more libraries cannot be accessed.
Storage limit exceeded for user profile &1.
No objects of specified name or type exist in library &2.
No specified objects can be displayed from library &2.
No objects deleted.
&1 libraries not validated.
User profile &2 damaged.
Library &1 not in system portion of library list.
Clear or delete of system library &1 canceled.
&1 objects duplicated. &2 objects not duplicated.
Key &1 not allowed with object type *&2.
Object &1 already exists in library &2.
First product library on library list destroyed.
Second product library on library list destroyed.
Object &1 type *&3 already exists in library.
Renaming library &1 failed.
Current library on library list destroyed.
Creation of library &3 not allowed.
Rename of library &1 failed.
Rename of library &1 previously failed.
This message used internally only by librarian.
This msg used internally by librarian and other components while performing generic functions.
Cannot allocate object &1 in &2 type *&3.
Not authorized to &1 in &2 type *&3.
Object not added to library &1.
Owner of object &1 and object being replaced not the same.
Error building a licensed program entry point table.
Library marked *DELETED not found.
Library &1 was not found in the user library list.
Object information function failed.
Operation failed for &2 in &1 type *&3.
Objects of type *&1 cannot be created into QTEMP.
Journal QAUDJRN in library QSYS not deleted.
Objects of type authority holder cannot be displayed.
*LIBL cannot be specified for FROMLIB.
Object type *&2 not found in library &1.
User library list limited to 25 libraries.
Library &1 exists in ASP device &2.
Object type *&1 not eligible for requested function.
Cannot delete some objects in library &1.
Duplication of all objects in library &1 not allowed.
Creation of authority holder in &2 not allowed.
Rename of library &2 not complete.
Library name &1 not valid.
Library &1 on library list and cannot be deleted.
Library &1 not deleted.
Job's sort sequence information not available.
Library &1 cannot be deleted.
Library &1 cannot be cleared.
TOASPDEV value not allowed with TOLIB(*CURLIB).
TOLIB, NEWOBJ, or TOASPDEV parameter not correct.
List object function failed.
ASPDEV value not valid with value specified for ASP.
Value for ASPDEV not valid with special value for library.
Library &1 damaged.
OBJTYPE value not compatible with OBJ value.
Cannot display library.
Duplicate library &1 in list.
Library &1 in system and user parts of library list.
Not authorized to library &1.
Object &1 cannot be moved into library &3.
Library list not replaced.
TOLIB, TOASPDEV, or NEWOBJ parameter not correct.
Object &1 cannot be created into library &2.
Conversion type &1 not valid.
Not authorized to object &1 in &2 type *&3.
Library &1 cannot be created into ASP &2.
Library &1 cannot be created into ASPDEV &2.
&1 not a primary or secondary ASP.
&1 not a primary ASP when *ASPGRP specified.
Not able to do remote delete or rename request.
Function not supported.
Object &1 cannot be created into library &3.
Object &1 cannot be moved into library &4.
Text value must be *SAME.
Library value cannot be a special value.
Library &1 cannot be created into user ASP &2.
Days used count field not reset to 0 for some objects.
&2 not valid for key &1.
Library QTEMP cannot be specified.
Cannot change &1 in &2 type *&3.
Conversion value &1 not valid.
Object type &1 not valid external object type.
Object type *&1 not valid external object type.
Number of libraries for library list not valid.
*AUDIT required to create or change libraries.
Key &1 not allowed with key &2.
Last used date for &1 in &2 type *FILE cannot be changed.
&1 not valid for replace object option.
Objects cannot be moved into QTEMP.
Cannot replace object &1 in &2 type *&3.
Cannot specify key &1 with other specified keys.
Authority value &1 not valid.
Must specify *ANY as only authority value.
Select or omit value &1 not valid.
Number of statuses must be between 1 and 5.
Status value &1 not valid.
Length or displacement value &1 not valid.
INHRULES parameter size is too small.
EPT &1 in library &2 at incorrect level.
Program not valid with entry &1.
Program &1 not eligible for requested function.
&3 entries changed. &4 entries not changed in EPT &1.
Object name &1 not valid.
No programs found to match generic name or *ALL.
Object &1 in &2 not found in system ASP.
Not all objects of type *&3 deleted
&4 *&3 objects in ASP group &6 deleted; &5 not deleted.
No objects in ASP group &4 deleted.
User password &1 already exists.
Do not have authority to create user profile.
User profile &1 not correct.
User profile &1 not found.
Process user profile not found.
User needs authority to do requested function on object.
Not authorized to use object &1 in library &3 type *&2.
Object &1 in library &3 type *&2 not found.
Library &1 not found.
New owner &1 does not have a uid.
New primary group &1 does not have a gid.
Owner and primary group cannot be the same.
Primary group may not be changed for object &1 in &3 type &2.
Application &1 not registered.
Application &1 already registered.
Operation not allowed for object type *&1.
Not able to allocate object &1 in &3 type *&2.
Not able to allocate library &1.
Not able to allocate user profile &1.
User profile &1 already exists.
User profile &1 not deleted.
Not authorized to use library &1.
Not authorized to user profile &1.
User &7 not authorized to *&6 &5/&4.
Job &3/&2/&1 not allowed to use privileged machine instruction.
User profile &1 not deleted.
Primary group may not have been changed for object &1 in &3 type *&2.
User profile &1 not deleted.
PGPOPT and USRPRF parameters cannot be the same.
Job &3/&2/&1 does not have special authority.
Error occurred while logging authority error.
Storage limit is greater than specified for user profile &1.
Not authorized to give authority to object &1 in &3 type *&2.
Not authorized to revoke authority for object &1 in &3 type *&2.
Not able to allocate internal system object.
Function not done for user profile &1.
One or more errors occurred during processing of command.
Not authorized to change user profile.
Not authorized to delete user profile.
Value &1 not valid when specifying a list of requests for API &2.
The requested list parameter is not specified for API &1.
&1 is not valid for the number of requested list values for API &2.
&1 special authority is required.
Command not run.
Not authorized to object &1 in library &3.
Not authorized to change ownership for program &1.
Not authorized to user profile &1.
No delete authority to user profile &1.
Password from device &1 not correct for user &2.
AUT input value not supported.
Not authorized to display list of users.
Access path to user profiles damaged.
User &4 not authorized to use &5.
&1 objects changed, &2 objects not changed.
&1 in &2 type *&3 adopted authority from previous call levels was set to *NO.
Not authorized to change the use adopted authority (USEADPAUT) attribute for &1 in &2 type *&3.
Not authorized to update &1 in &2 type *&3.
Authority check for use adopted authority attribute failed.
Cannot set password to expired when password is *NONE.
User &7 not authorized to use *&5 &6/&4.
User profile &5 not authorized to *&4 &3/&2.
Object &1 type *&2 not found in library list.
Library name &1 not allowed with OBJ(generic name) or OBJ(*ALL).
Object &1 type *&2 cannot be found.
Process profile not owner of object &1 in &3 type *&2.
User &5 does not have &4 special authority.
Internal security object not available. Reason code &1.
Not valid access to interactive profile.
&1.&2.&3 not correct format.
User profile &1 cannot have a GID and be a member of a group.
&1 value not valid.
Cannot change UID value for QSECOFR.
User profile &1 cannot have a GID.
The AUTTYPE value of *FIELD is not valid for file &1 in library &2.
Server authentication entry already exists.
Message used internally only.
The expiration date parameter is not valid.
Authority given to &2 objects. Authority not given to &3 objects.
No objects found for &1 in library &2.
No libraries found for &1 request.
Command &1 failed the authority test.
Authority not revoked from all objects or all users.
User profile &1 not a group profile.
Group profile &1 not deleted.
Group profile &1 not found.
User profile name specified on both USRPRF and SUPGRPPRF parameters.
Service tools ID to be changed not correct.
Requesting service tools ID not correct.
Requesting service tools ID password not correct.
Server authentication entry does not exist.
Not all information stored.
User profile &2 was not created or changed. Reason code &3.
OWNER or GRPAUT value not permitted.
Value for GRPAUT not correct.
Group information removed from &1 user profiles.
User profile &1 not allowed to be a group member.
User profile &1 not deleted.
Document password not valid.
Value &1 for DOCPWD not valid.
Special authority *ALLOBJ required when granting *SECADM or *AUDIT.
Validation list entry already exists.
Validation list entry does not exist.
Not authorized to perform function.
Not all information stored.
Value for a parameter was not valid.
Group profile with GID &1 not found.
Cannot display all objects in user profile.
Expired user profile &1 changed to *DISABLED status.
Cannot allocate user profile &1.
Authority may not have been changed for object &1 in &3 type *&2 for user &4.
Profile token not valid.
Not authorized to change IBM-supplied service tools user ID password.
Errors were found in security values.
User &1 not allowed to use function &2.
Authorization list &1 already exists.
Authorization list &1 cannot be deleted.
Certificate type not valid.
Certificate not correct for specified type.
Certificate association already exists.
Certificate not found.
Selection control not valid.
*NOPWD not allowed for current user.
*PUBLIC is always on authorization list, cannot be added.
The users specified do not exist on the system.
&1 errors adding users, &2 authorization lists processed.
Authorization list &1 does not exist.
Not authorized to change authorization list &1.
&1 errors removing users, &2 authorization lists processed.
*PUBLIC cannot be given *AUTLMGT authority.
&1 errors changing users, &2 authorization lists processed.
*PUBLIC cannot be removed from an authorization list.
Unable to allocate authorization list &1.
Function &1 not registered.
Function &1 cannot be removed from the registry.
Function ID &1 not valid.
Function group &1 not registered in same category.
Function product &1 not registered in same category.
Function &1 already registered.
*EXCLUDE cannot be specified with another authority.
User profile does not have all special authorities being granted.
*SECADM required to create or change user profiles.
Storage limit exceeded for user profile &1.
Initial program value cannot be changed.
Initial menu value cannot be changed.
Attention program value cannot be changed.
Current library value cannot be changed.
Authority not revoked for object &2 in &3 from user &1.
Not able to create internal security object.
Not able to retrieve list of &1 objects.
Operation not allowed for function &1.
Not all usage information changed for function &1.
Operation not allowed on user profile &1.
Application ID &1 not valid.
Profile token not valid type.
Authority of *AUTL is allowed only with USER(*PUBLIC).
OBJTYPE(*AUTL) not valid on this command.
Authority of *AUTL not allowed for object type *USRPRF.
AUTL parameter not allowed for object type *USRPRF.
*EXCLUDE cannot be revoked from *PUBLIC.
Object &1 in &3 type *&2 not secured by authorization list &4.
User creating an authorization list must have *ADD authority to his user profile
User &1 not on authorization list &2, no authorities retrieved.
Not authorized to retrieve authorities for user &1.
Authority of *AUTL cannot be specified.
Only *AUTLMGT authority can be specified with *ALL authority.
Only *AUTLMGT can be specified with *CHANGE authority.
Only *AUTLMGT authority can be specified with *USE authority.
Group profile for user not found.
Authority *AUTLMGT allowed only if object type is *AUTL.
Not authorized to authorization list &1.
Not authorized to change the auditing value.
Authority holder does not exist.
Not authorized to create or delete authority holder.
User profile &1 not deleted.
Group profile &1 not found.
Authority holder already exists.
Authority holder could not be created.
Profile &1 is not a group profile.
Not authorized to change authorities.
Not authorized to change authorities.
Authority holder could not be created.
Object could not be associated with its authority holder.
Object &1 type &3 is not program defined.
Ownership may not have been changed for object &1 in &3 type *&2.
Function not done for user profile &1.
User profile &1 not deleted.
Password does not meet password rules. Return code &1.
NEWOWN or OWNOBJOPT parameter cannot be the same as USRPRF parameter.
Password less than &1 characters.
Password longer than &1 characters.
Password matches one of &1 previous passwords.
Password contains one of the following: &1.
Password contains two numbers next to each other.
Password contains a character used more than once.
Same character in same position as previous password.
Password must contain a number.
Not allowed to change user profile &1.
Auditing value not changed for some objects.
Auditing value not changed for some user profiles.
Value for SUPGRPPRF parameter is not correct.
The &1 value &2 is used by another user profile.
User profile not allowed to be a group profile.
Password contains a character repeated consecutively.
Password cannot be same as user ID.
Password approval program &1 not found.
Password approval program signaled an error.
Not allowed to use password approval program.
Parameters in password approval program not correct.
System authorization list QRCLAUTL too large.
Authority of *AUTL cannot be specified.
Use of generic user profile name not correct.
No user profiles of specified name exist.
Operation on file &1 in &2 not allowed.
The user profile being changed must have a GID.
Not allowed to change UID of the user profile.
Not allowed to change GID of the user profile.
Not allowed to change the UID or GID of user profile &1.
Unable to process request for user profile &1.
Group profile name cannot be *NONE when selection criteria is *MEMBER.
USROPT parameter cannot specify *STSMSG and *NOSTSMSG.
Password not correct for user profile &1.
User profile &1 is disabled.
Password for user profile &1 has expired.
No password associated with user profile &1.
Maximum number of ProfileHandles have been generated.
ProfileHandle is not valid.
Some objects not deleted. Try again.
*USE authority to user profile &1 required.
User type not valid.
Unable to process request for user profile &1.
Unable to process request for user profile &1.
Group profile name must be *NONE when selection criteria is not *MEMBER.
Selection criteria is not valid.
Starting profile option must be 0 or 1.
Unexpected errors occurred during processing.
Coded character set identifier &1 not valid.
User profile with UID &1 not found.
&1 specified a LMTCPB value that is not permitted.
CCSID value &1 not compatible with the system.
Value for new password not allowed at password level &2.
New password cannot be *NONE.
Number of authorities must be between 1 and &1.
Special authority value &1 not valid.
Call level &1 not valid.
Authority value &1 not valid.
Must specify *EXCLUDE or *AUTL as only authority value.
Value &1 not valid when specifying objects to be returned by API &2.
Continuation handle not valid for API &1.
Audit value may not have been changed for object &1 in &3 type *&2.
System user profile cannot be changed.
Device &1 not found in ASP group &2.
The user profile specified cannot be changed.
Command contains errors. Press F15 to submit with errors.
Programmer menu ended at request of user.
/* */
Option &1 not correct.
Function key not valid.
F11 invalid after changing any input field.
Command was too long for batch processing.
Value in selection field cannot be blank.
Value entered for Type field not permitted.
Source file name required for user-defined type.
Object already exists. Press F11 to replace object.
Invalid parameter specified with sign-off option.
Special authority of *JOBCTL and *SAVSYS required.
Program &1 in &2 received wrong parameters.
Password not changed.
Message queue &1 in &2 not cleared.
Library &1 not copied or partially copied.
No authority to the option.
Your library list was not changed.
Error occurred with the option.
Password not correct.
Only 1 attempt left to check password.
Maximum number of attempts to check password reached.
FROMLIB and TOLIB parameters cannot specify the same library.
No previous library to display.
No additional libraries to display.
File &1 in &2 not a physical file.
Not authorized to library &1.
Library &1 not found
Message queue &1 in &2 not found.
Initial program &1 in &2 cannot be called.
Break program &1 in &2 not found for message queue &3 in &4.
Authority error occurred on call to break program &1 in &2 for message queue &3 in &4.
Message file &1 in &2 not found.
Not authorized to message queue &1.
Specified message type not valid with specified program message queue.
Incorrect exception ID was sent from the machine.
Incorrect exception ID was sent using the SIGEXCP instruction.
Reason code sent from the machine is not valid.
Message search direction specified is not valid.
Format name of message selection information is not valid.
Field identifier is not valid or is a duplicate of another field indentifier specified.
Message key not found in message queue &1.
Not authorized to message file &1 in &2.
Message ID &1 already exists in message file &2 in &3.
Length of reply not valid for reply type.
&1 for VALUES parameter not valid.
End of requests.
&1 for RANGE parameter not valid.
&1 not valid for REL parameter
&1 for DFT parameter not valid.
Message identifier &1 not found in message file &2 in &3.
Clear option &1 in system program is not valid.
Message type &1 in system program is not valid.
Variable for SENDER parameter is too small.
Severity criteria specified is not valid.
Call stack entry name is not valid.
Length &1 specified for maximum message length is not valid.
Reply already sent for inquiry or notify message.
Message not sent. &1 in &2 not work station message queue.
Reply not valid.
Variable specified in SENDER parameter less than &1 bytes.
Format required for each substitution variable.
Format required for each value in DMPLST.
Substitution variable with format of *BIN or *UBIN must be 2, 4, or 8 bytes long.
Substitution variable with format of *VARY must be 2 or 4 bytes long.
Message queue parameter is not valid.
Message to work station &1 did not break.
Call stack entry already a request processor.
Request level &1 is not valid.
Message key not found in the job message queue.
Modification option &1 not valid.
Tried to change message which is not an exception.
Message type must be ESCAPE for *CHANGE modification option.
Message description not added to message file
Substitution variable number must be 1 through 99.
Cannot send reply to message type other than *INQ or *NOTIFY.
Function not allowed for system log message queue &1.
RANGE, REL, and VALUES parameters are mutually exclusive.
System reply list not found.
System Reply List entry not added or changed.
MSGQ(*WRKSTN) not allowed unless done interactively.
Reply value entered is not valid.
Reply value entered is not valid.
Invocation pointer parameter not valid.
Message severity &1 not valid.
Log option &1 not valid.
Priority &1 not valid.
Message is not an active exception.
Cannot promote message of type other than *ESCAPE or *STATUS.
Reply must be in range of &1 to &2.
Not authorized to display job log.
Reply does not meet specified relations.
Job log not displayed or listed because job has ended.
Number of message queues, &1, is not valid.
Reply marked '>' not allowed for inquiry message.
Delivery mode specified not valid for system log message queue.
No entries exist in current version of log.
Not authorized to scope message handling program &1.
Message that should be a reply, is not a reply.
Error occurred with scope message handling program &2.
Scope handling program destroyed.
A CCSID conversion error occurred.
Length of message file information parameter &1 is not valid.
The delivery specified is not valid with a generic message queue
Severe error while addressing parameter &1.
Work station message queue &1 not allocated to job.
Message queue &1 is allocated to another job.
Replaced message file must contain no messages.
Reply queue not sender's program message queue.
Substitution variable in message text not in list of variables.
Message data length defined with FMT parameter too long.
Log version &1 in &2 closed and should be saved.
Text not available for message &2 file &1.
Reply replaced by reply handling exit program.
*SPP or *SYP variable not on 16-byte boundary.
Message queue &1 could not be extended.
Message file &1 could not be extended.
CALLX valid only from external exception handler.
Cannot return to signaller after exception message has been deleted.
Inquiry message reply requested.
Replacement text of message &1 in &2 in &3 not valid for format specified.
Reply length greater than &1.
&3 message queue &1 in library &2 logically damaged.
This message used internally only by message handler.
Error occurred when sending message&1.
Destination call stack entry not valid.
Message queue &1 in &2 not found.
Message queue not found.
Length of field not valid.
Invalid wait time specified.
Cursor not under message when key was pressed.
Message waiting in operator message queue.
The maximum number of messages to list, &1, is not valid.
Message queue &1 currently in use.
Not authorized to requested version of log.
Call stack entry not found.
Call stack entry not found.
Scope message type is not valid.
Size of message selection information, &1, is not valid.
CCSID &1 is not valid.
Retrieve option &1 not valid
Requested version of log damaged.
Work station message queue not available.
Message type &1 not valid.
Message file currently in use.
Operation not allowed on message queue &1 in &2.
Number of parameters for break program &1 in &2 message queue &3 in &4 not valid.
Size of message queue &1 in &2 is not correct.
Reply message queue *WRKSTN not valid for batch job.
Message identifier required for *NOTIFY, *ESCAPE, or *STATUS message types.
This message used internally only by message handler.
This message used internally only by message handler.
This message used internally only by message handler.
Message identifier not allowed with message type *RQS.
Exception message was sent to a location preceding the first entry in the call stack.
This message used internally only by message handler.
Cannot remove messages now.
Size for &1 in &2 exceeds machine limit.
Invalid length. MAXLEN for data queue &1 in &2 is &3.
Message identifier &1 not valid.
Error occurred attempting to display menu &1 in &2.
Value for number of message queues not valid.
Value for call stack counter parameter not valid.
Value for remove message not valid.
Value of &1, for number of message types, not valid.
Value for messages to remove not valid.
Value for the length of message information not valid.
Value for wait time not valid.
Value for message action not valid.
Value for replace substitution variables not valid.
Value for return format control characters not valid.
Either message identifier or message text must be specified.
Messages to remove must be *ALL if program message queue is *ALLINACT.
Message key and messages to remove are mutually dependent.
Message key not allowed with message type specified.
Message key required for message type specified.
Message key of *TOP requires message type of *NEXT.
Message type &1 not valid.
Severe error while addressing parameter list.
Not able to move message.
Length of &1, not valid for message text or data.
Value &1 for call stack entry name length not valid.
Value &1 for remove unhandled exceptions not valid.
When call stack entry name is '*' or '*CTLBDY', module name and program name must be '*NONE'.
Message referred to by MRK, &2, not on *EXT.
Not allowed to send messages to, or remove messages from, another job.
No escape message to resend.
Value &1 for TOLEVEL parameter is not valid.
Module or bound-program name is blank.
Length of parameter &1 on &2 macro is not correct.
Value &1 for display wait time not valid.
Cannot specify PREV for the FROMPGM parameter.
Not allowed to send stored command message.
Pointer to call stack entry not valid.
Value of To call stack entry data type parameter not valid.
The length &1 is not valid when the specified format is &2.
Control boundary not found on call stack.
Program boundary not found on call stack.
Call stack entry is not valid to resend message.
*PGMNAME requires a specified program name.
Call stack entry &2 for *PGMNAME not found.
Module name cannot be specified when *PGMBDY is used.
Qualifier &1 incorrect for use with pointer.
Pointer qualifier &1 incorrect for use with pointer.
QTEMP is not a valid library to use for the file &1.
Member replace option &1 is not valid.
Number of elements &1 in message filter array is not valid.
Message queue &1 not valid for use with the QMHCTLJL API.
Message type &1 specified in filter element &2 is not valid.
Message severity &1 specified in filter element &2 is not valid.
Reserved field in filter element &1 does not contain a null value.
File &1 in library &2 cannot be used for job log production.
DDM file &1 in library &2 cannot be used for job log production.
Error message queue library name &1 is not valid.
Failure occurred while preparing for job log production to a physical file.
The *APIDFN option requires that the QMHCTLJL API be run first.
A text string is required with specified message text.
Failure occurred while writing job log to file &1 in library &2.
Message used internally by message handler.
The job log is not complete.
Message queue for system log &1 damaged.
Message queue has changed.
Deleting work station message queue not allowed.
Break program &1 in &2 received no messages for message queue &3 in &4.
MODE(*NOTIFY) not allowed in batch mode.
Cannot move messages to same or later call stack entry.
Message key &2 refers to a message that is not on the mover's call stack entry.
Message file &1 in &2 logically damaged.
Default program &1 in &2 for message &3 not usable.
Operation not allowed for message queue &1.
Message queue &1 cannot be displayed.
Invalid message ID range.
Unable to open display or printer file &1 in &2.
Error occurred while processing message ID list.
Message used internally by message handler.
Lower range limit greater than upper range limit.
Break program &1 in &2 for message queue &3 in &4 cannot be called.
No job log information.
Exception handler not available because of reason code &1.
Status messages can only be sent to call message queues.
Job message queue for &3/&2/&1 can not be extended. Job ended.
Function check occurred in initial program.
Job log not written to output queue because of &1.
Message file &1 in &2 not found for message &3.
Error in RTVMSG macro.
Job message queue for batch job can not be extended.
Length &1 specified for maximum message help length is not valid.
Not authorized to message file &1 in &2 for &3
Message file &1 in &2 damaged for &3.
Job message queue is damaged. Job log ended.
Exception recursion detected in &2, at &3 for &1.
MSGQ(*USRPRF) specified and no msg queue with user profile.
Exception recursion detected in an ILE procedure.
Value &1, for the length of message queue information not valid.
Too many records written to file &2 in &3.
Value for selection criteria not valid.
Parameters not allowed for initial program &1 in &2.
TYPE(*NONE) specified, other values incorrect.
Message description not changed for &1.
Change to TYPE parameter requires change to LEN parameter.
No message reply information in message &1.
No reply TYPE information in message &1.
No changes specified on CHGMSGD command for &1.
Damage to message file QCPFMSG.
Damage to message file &1 in &2.
The log version &2 was created for system log &1 but it does not have the proper authorities.
Exception message sent to a deleted program or procedure.
Message key and message type combination not valid.
Unable to send reply marked '>' to inquiry message.
Message queue &1 extended.
Error trying to create log version &2 for system log &1.
Sequence number &1 already defined in system reply list.
Sequence number &1 not defined in system reply list.
System reply list damaged.
System reply list currently in use.
Error occurred in SNDUSRMSG command.
Message &1 not merged.
Messages were not merged.
Cannot specify the same message file more than once.
Message &1 has been deleted from message file &2.
Message &1 in message file &2 has been changed.
Cannot use this function on a non-job message queue.
Cannot use this function on a job message queue.
Invalid parameter type used with job message queue
Value &1 for message selection criteria not valid.
Message identifier &1 not sent.
Line description &1 not found.
Controller &1 not found.
Device description &1 not found.
Not able to allocate &1.
Line description &1 already exists.
Cannot identify device type for automatic configuration.
Controller description not created by automatic configuration because of error.
Mode description &1 not found.
At least one logical channel entry must be specified.
Configuration list &1 already exists.
Configuration list &1 not created.
Configuration list &1 not found.
Parameter not valid.
Device description not created by automatic configuration because of error.
List type &1 not correct for copy.
Too many entries were added.
Table &1 in &2 already exists.
Controller &1 must be varied off for this operation.
Device Description &1 not deleted. Device in use.
Edit description not found.
Device description &1 not changed.
Table &1 not found.
Device description &1 not created due to errors.
Mode description &1 not created due to errors.
Index for configuration list &1 not changed.
Index for configuration list &1 not changed.
Line description &1 not changed.
Configuration list &1 has been deleted.
Field longer than integer or fraction mask.
Class-of-service description &1 not changed.
Need connection number for switched or SNBU controllers.
Library &1 not found.
Edit description &1 in &2 previously deleted.
Not able to allocate object &1.
Line description previously deleted.
Controller description previously deleted.
Device description previously deleted.
Device description parameter not valid.
Mode description &1 previously deleted.
Mode description &1 damaged.
Mode description &1 not changed.
Error occurred during vary on at IPL processing.
QDCTRF stopped due to failure.
Connection number and X.25 password duplicate of &1.
Device type &2 not valid.
Line description &1 must be varied off.
Not authorized to object &1.
Device &1 in use. Command not run.
Command not processed. Controller &1 in use.
Parameter not valid.
Edit mask too large.
CFGL type &1 does not match existing type &2.
Controller &1 not a work station controller.
Automatic configuration failed to complete.
Auto-configuration stopped due to wrong keyboard type.
File member &1 contains its maximum sequence number.
No objects found.
Vary command not processed.
Device name &1 not valid.
Remote identifiers required.
Delete request failed. Message &1 occurred.
Delete request failed.
Buffer length not valid.
Delete request not allowed for device &1.
Record length of &1 in library &2 is too small.
Option &1 not valid for specified entry.
Source file member &1 not found.
Double-byte character set language not valid.
Shift-in and shift-out value of double-byte character set not valid.
Translation type of double-byte character set not valid.
Table &1 not found.
Controller description &1 not changed.
Printer not attached to same controller as display.
Device description &1 created but possibly not usable.
Vary command may not have completed.
*PROMPT value not allowed in batch mode.
Number of parameters specified not valid.
Translation length exceeded maximum length.
Class-of-service description &1 already exists.
Identifier &1 not correct for logical channel entry &2.
Line description parameter specified not valid.
Configuration list &1 previously deleted.
Type &1 not correct for logical channel entry &2.
Controller &1 cannot attach to logical channel entry &2.
Cannot remove all entries from configuration list &1.
Identifier &1 entry cannot be changed while controller attached.
Object description not deleted.
Double-byte character set source not valid.
Device description not changed by port sharing because of error.
Port sharing failed to complete.
Connection list &1 not found.
Program name &1 not found in system library.
Connection list &1 has been damaged.
Entry &2 not added to connection list &1.
Class-of-service description &1 not found.
Class-of-service description &1 previously deleted.
Changes not compatible with attachments.
Line &1 not compatible with controller.
Class-of-service description &1 damaged.
Device &1 no longer communicating.
Data in source file &1 in &2 not valid.
Device description not changed by automatic configuration because of error.
Connection list &1 not created due to errors.
Connection list &1 already exists.
Connection list &1 not deleted.
Connection list &1 not changed due to errors.
Entry &2 not changed in connection list &1.
Entry &2 does not exist in connection list &1.
Entry &2 in connection list &1 not renamed.
Line &1 not compatible with network interface.
Entry &2 in connection list &1 not removed.
Line description &1 not compatible with NWI.
Device &1 is not in a proper status to get mode information.
Duplicate mode names.
&1 not valid for line &2.
&1 not valid for controller &2.
&1 not valid for device &2.
Unable to access system value &1.
Device description &1 cannot be deleted or renamed.
Connection list &1 not deleted.
Rename of &2 type *&5 did not complete.
Object &2 type *&5 must be varied off.
&2 type *&5 cannot be used for rename.
Object &2 type *&5 cannot be renamed.
Object &2 type *&5 not renamed.
The request did not complete in the time allotted.
Mode &1 not found for device &2.
Library parameter is not set to "QSYS " on call.
T.61 conversion table not found.
Error in input data.
A nonspacing underline character was found in the input data.
Ward value not supported.
Incorrect information in T.61 conversion table.
Configuration list &1 not converted.
Change option not allowed for &1 configuration list.
Work with entries not allowed for &1 configuration list.
Channel entries cannot be changed if CALLCTL(*THIRD) is specified.
Category of object not compatible with API format.
Configuration description type not valid for this API.
Object qualifier not valid for this API.
Status qualifier not valid for this API.
Line &1 cannot be deleted while varied on.
Network server description &1 not created due to errors.
Network server description &1 not changed.
Network server description &1 not found.
Status of drive resources in device description &1 not changed.
Function &1 for object &2 not supported, request rejected.
NetBIOS description &1 previously deleted.
Extended wireless line member not added.
Extended wireless line member not changed.
Extended wireless line member not displayed.
Initialization program has ended with a hard error.
Initialization program ended with soft error.
Extended wireless controller member not added.
Remove network server storage link command failed.
Add network server storage link command failed.
Extended wireless controller member not changed.
Extended wireless controller member not displayed.
Entry for barcode group not removed from extended wireless controller member.
Entry for PTC group not removed from extended wireless controller member.
Program QZXCINZ terminated abnormally. See previous messages.
Network server &1 not varied off.
Active IPX description &1 cannot be changed or deleted.
IPX description &1 not created due to errors.
IPX description &1 previously deleted.
IPX description &1 not changed.
Key not valid for this API
NWSD type not compatible with API format.
New value not valid for this API.
Number of changes not valid.
Class-of-service description &1 not created due to errors.
Network interface &1 not compatible with attached line.
Mode &1 can not be deleted.
Network interface &1 not compatible with line &3.
Line description &1 not compatible with NWI.
Network server type not supported.
Not able to allocate object &1 type &2.
Line &1 not compatible with network server &2.
Option &1 not valid for server &2.
The conversion of object &1 must be performed before access to the object is allowed.
Pointer in program &1 does not point to correct data.
Object &1 not supported.
not used in v5r4
Sequence for logical channel type not valid.
Remote identifier found following *ANY.
Device description &1 not found.
Controller description &1 not found.
Line description &1 not found.
Device description &1 previously deleted.
Device &1 not *APPC type device.
Maximum sessions exceed maximum conversations.
Locally controlled sessions exceed maximum sessions.
Pre-established sessions exceed locally controlled sessions.
Description for line &1 deleted with controller &2 attached.
Description for controller &1 deleted with device &2 attached.
Controller description &1 not created.
Controller description &1 not deleted.
Line description &1 not created due to errors.
Line &1 not compatible with controller.
Character identifier outside of valid range.
Table &1 in QUSRSYS not found.
Device &1 session ended.
Device &1 failed.
Device &1 recovery in progress.
Reply to message &1 ignored for device &2.
Device &1 recovery failed.
All sessions ended for device &1.
Device description &1 is damaged.
Controller description &1 damaged.
Line description &1 has been damaged.
Message &1 not monitored.
User message queue &1 not valid.
Message queue &1 in library &2 not found.
Network interface description &1 not created due to errors.
Network interface description &1 already exists.
NetBIOS description &1 not changed.
Network interface &1 not compatible with line &3.
Network interface description &1 not found.
Network interface description &1 has been damaged.
NetBIOS description &1 not created due to errors.
Network interface description &1 not changed due to errors.
&2 not valid for network interface &1.
Network interface description &1 not varied off.
Option not allowed for network interface &1.
Source variable class not valid.
Edit mask not valid.
Format &1 not valid.
Device category not valid for specified format.
Edit code not valid.
Fill/floating currency indication not valid.
Source variable precision not valid.
Source decimal position not valid.
Edit word length not valid.
Receiver variable length not valid.
Edit mask length not valid.
From-file &1 in &2 not allowed.
From-file &1 in &2 not found.
To-file &1 in &2 not allowed.
FMTOPT(*CVTSRC) not allowed for specified files.
Remote from-file in DDM file not found.

Length: 272798 Date: 20200927 Time: 023914

Count: 1414     sap01-206 ( 1069 ms ) This documentation is copyright by IBM.