OS/400 Messages

Are you looking for the description of OS/400 (System i) messages e.g. CPF9801? Then you have come to the right place. Below you can see a (hoefully) complete list of of all OS/400 messages with all “second level texts”.

Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43


Complete OS/400 Messages Documentation From CPF9218 up to CPFB0C1

Complete OS/400 Messages Documentation From CPF9218 up to CPFB0C1

This documentation is copyright by IBM.
Count: 1428 Skipped: 0
OS/400 Messages
Description
File &1 in &2 member &3 not open under declare name &4.
Operation not valid for file &1 in &2 member &3.
Operation key length &7 not equal to file key length &6.
Invalid key limits given for file &1 in &2.
Value &4 not supported for parameter &5 on target system.
Invalid key definition for file &1 in &2 on DDM request &4.
Deleted records not allowed for keyed insert.
Parameter &4 not supported for DDM request &5.
Storage space exceeded. Message &1 received by target system.
Member name &3 not supported for DDM request &4.
Invalid file type for DDM operation.
Cannot build format for DDM file &2 in library &3.
Cannot build format for file &1 in library &2.
Based-on file &4 in &5 contains no members.
File &1 in library &2 not created.
Base file name &7 invalid for target.
Object &1 not changed. Reason code &4.
Object &1 cannot be created as temporary. Reason code &4.
Target does not support the request &4 for file &1 in library &2.
Initialization failed because file space exceeded.
Direct file &1 in library &2 not created.
Total key length is too large.
Declare name &4 cannot be used with command &3 for reason &5.
Parameter &5 only supported for documents.
Cannot share recovery file for multiple reads and changes.
Invalid access method &5 for object &1 in &2.
Load stream error for object &1 in &2. Reason code &5.
DDM request &5 not performed. Recovery file exists.
DDM request &2 invalid for object name &1.
BGNNAM &6 not found.
DDM request &3 invalid for object &1.
Unexpected message &12 received in DDM target job.
Declare name &4 does not support DDM request &3.
User &6 not authorized by user exit program to function &3 for object &1.
Error on object &1 in user exit program &4 in &5.
Cannot load a deleted record to a file that does not allow deleted records.
Object name &1 invalid. Reason code &3.
Commitment control operation failed.
DDM request &3 not allowed for current directory &2.
Commitment control already active.
File or member name not allowed for DDM request &4.
DDM request &3 not allowed for folder management object &1 in &2.
DDM request &3 for object &1 in &2 is not allowed.
Error occurred during generic name processing.
Object &1 in &2 not opened for update.
Parameter &4 missing from DDM request &3.
Object &1 not created in root directory.
Format definition is not compatible with source system.
Format definition is not compatible with source system.
Logical file &1 in library &2 not created.
ROLLBACK is required.
Open of file &1 in library &2 is not allowed when using DDM because the file contains LOB data.
Problem analysis complete; possible causes were displayed.
Problem analysis complete; the problem no longer exists.
Problem analysis not successful.
Problem verification testing complete; problem no longer exists.
A problem may still exist or a verification test failed.
Problem recovery complete.
Problem recovery not successful.
Unable to complete problem analysis. Reason code &1.
Not authorized to retrieve error log data.
No operator at remote system available to assist.
Unattended problem analysis complete.
Problem analysis partially complete due to user exit.
Local problem log updated with remote problem log data.
Remote problem analysis ended at user request.
No operator at remote system to run recovery or verification.
Problem analysis procedure was exited before it had completed.
Problem analysis did not complete due to an error.
Requested operation not completed; resources were not available.
Requested procedure is not allowed.
Problem analysis ended due to conversion error.
Error occurred during display of message.
Error detected while putting display on screen.
Help is not available.
Information required for problem analysis not available.
Remote problem analysis failed on &1.
&1 not entitled to service.
Communication failure during remote problem analysis.
Problem analysis results not recorded in problem log.
Problem analysis results not recorded in problem log.
Information not available about external system.
&1 to display panels is not valid.
Panels cannot be displayed in a batch job.
Current status &3 does not match problem status &4.
Current status &1 is not valid.
Problems on a remote system cannot be analyzed.
Problem &1 has a status that is not allowed.
Problem selected not allowed.
Problem analysis procedure was exited before it had completed.
Severity &1 is not valid.
Requested status &1 is not valid.
Number of requested statuses is not valid.
*IBMSRV not allowed as service provider for problems in OPENED status.
Reference code &1 not found.
Problem &1 from system &2 cannot be analyzed.
PDP time limit exceeded.
Controller for location &4 in network &5 already varied on.
Controller &1 vary on failed. System error.
Controller for location &4 in network &5 is not available.
Logical connection not established for APPC device &25.
System detected an internal error on controller &24.
Sessions for all devices on controller &24 ended abnormally.
All work on controller &24 ended because of system error.
Connection attempt not accepted for controller description &24.
Communications for controller &24 ended. Communication program was canceled.
Session ended on device &25 because of an APPC session failure on device &3.
Session ended on device &25 due to a communications program protocol error.
Type field in controller description &24 is not valid for location &4 in network &5.
Route to location &4 not found for controller &1.
Session start request failed for device &12 on controller &1.
Unable to automatically create controller for location &4 in network &5.
Unable to automatically create controller for location &4 in network &5.
Unable to automatically create controller for location &4 in network &5.
Device on controller &1 failed to automatically create.
Device on controller &1 failed to automatically create.
Device on controller &1 failed to automatically create.
Device on controller &1 failed to automatically create.
Device on controller &1 failed to automatically create.
Device on controller &1 failed to automatically create.
System detected software problem processing ended due to internal failure.
Symptom string created was not valid.
Tried to create a symptom string that is not valid.
Not able to create default symptom string.
Symptom string created was not valid.
Added a symptom to the symptom string that was not valid.
Problem log updated.
Problem occurred on the system.
Symptom string created was not valid.
Software error logging not active.
&1 is not a valid number of data items.
&1 is not a valid number of object names.
Error already logged.
Software problem logging (QPDLOGER) API error occurred.
Suspected program cannot be determined.
Error in parameter. Reason code is &1.
Not a valid number of symptoms.
Not a valid number of spooled files
&1 is not a valid value for the Print job log parameter.
&1 document library objects saved. &10 not saved.
Changes for ASP &1 not saved.
List of folder names not allowed with DLO parameter.
CRTDATE value not valid with REFCHGDATE or REFCHGTIME.
SAVF parameter not valid.
LABEL(*GEN) required.
DLOs saved from ASP &1 restored to system ASP.
Save data area &1 in use.
Type-ahead data stream not supported by controller.
Type-ahead option parameter value not valid.
Data queue &1 in &2 requires a key value.
Key length must be zero for data queue &1 in &2.
Cannot lock data queue &1 in &2.
An invalid search order was specified.
Sender ID length value is not valid.
Key length must be &3 for data queue &1 in &2.
Invalid key length specified.
Invalid sender ID length specified.
Space access error.
Storage limit exceeded for data queue &1 in &2.
The specified selection type is not valid.
The specified retrieve length is not valid.
The specified message selection template length is not valid.
The data queue is not a keyed data queue.
The specified key length is not valid.
Operation on DDM data queue &1 in &2 failed.
Function not supported for DDM data queue &1.
Value for asynchronous request not valid.
Asynchronous request must be *NO for data queue &1.
Value for data length parameter not valid.
Value for remove message parameter not valid.
Format &1 not allowed for data queue.
The SIZE parameter is not valid.
The maximum number of entries is too large.
Internal program error occurred.
Value for parameter eight is not valid.
Entry not sent. Data queue attributes are not correct.
Entry not sent. Data in journal entry is not valid.
Data queue function not successful.
Already in debug mode.
Not in debug mode.
View not found.
From view not found.
To view not found.
No previous view.
View information damaged.
Previous view not correct.
Map not available.
Error addressing API Parameter.
No source text available.
Statement view already exists.
Cannot retrieve text from file.
View type not valid.
Text location is not valid.
Module &1 not found.
Value for debug attribute not valid.
File not found.
Cannot map between views.
Map type not defined.
Discard Previous Views parameter not valid.
Create Map parameter not valid.
API not valid at this time.
View already contains text descriptors.
View already contains file descriptors.
Debug attribute parameter not valid.
Input Output parameter not valid.
Number of entries not valid.
Supplied Text Length parameter not valid.
View data overflow. All debug data lost.
Error occurred creating symbol table.
Program &1 not a bound program.
Line length not valid.
Source file has changed.
Module &1 cannot be debugged.
Number of lines not valid.
Starting line number not valid.
Source cannot be accessed.
One or more source files have changed.
Column number not valid.
Line number not valid.
Missing supplied text.
No such text in previous view.
File name length not valid.
File name offset not valid.
Parameter does not match on continuation request.
Program language of module not supported.
Continuation handle parameter not valid.
Error occurred creating or accessing debug data.
Error calling debug session handler.
Error calling debug program stop handler.
Program type parameter not valid.
Call stack entry does not exist.
File flag not valid.
Step count not valid.
Step type not valid.
Remove type not valid.
Data option specified not valid.
Number of lines not valid.
Required information not found for operation.
Encryption or decryption key length not valid.
Decryption error occurred.
Key not valid; &1 attempts remaining.
Receiver variable length parameter not valid.
CCSID of file name parameter not valid.
View is not a statement view.
Debugging optimized code may give unexpected results.
OPM program &1 cannot be added to ILE debug environment.
Program &1 already active in OPM debug environment.
Program &1 already in ILE debug environment.
Module name value &1 not valid.
OPM source cannot be accessed.
Thread &1 not stopped or halted.
Thread &1 not found.
Threads debugging not supported.
Number of threads not valid.
Thread array special value not valid.
Debug is not servicing a job.
Debugged job not stopped.
Value specified in module name parameter is not valid.
Class file not found.
Not authorized to class file.
Java class file not available.
Watch is not supported for this programming language.
Source file has changed.
One or more source files have changed.
Source file cannot be accessed.
Class file cannot be debugged.
Source file type not supported.
Thread status value not valid.
Thread array special value not valid.
Thread status cannot be changed.
Source file not found.
Activity &1 already exists.
Element &3 of destination array not valid.
Number of conditions &1 not valid.
Start after time &1 not valid.
Start before time &1 not valid.
Destination format value &1 not valid.
Number of destinations &1 not valid.
Element &3 of condition list array not valid.
Hold value &1 not valid.
Activity name &1 not valid.
Activity type &1 not valid.
Replace value &1 not valid.
Function parameters length &1 not valid.
Condition list or start time cannot be specified.
Start after date &1 not valid.
Start before date &1 not valid.
Activity &1 not found.
Activity name required.
Command &1 not valid in this mode.
Generated activity name limit exceeded.
Activity cannot be conditioned on itself.
Maximum size of CRQD &1 exceeded.
Start time not valid.
Change request description created, but warnings exist.
Change request description changed, but warnings exist.
Not authorized to change USRPRF.
Internal processing error occurred.
Activity &1 already exists in condition list.
User space library name &1 not valid.
CRQD library name &1 not valid.
Database initialization failed.
Activity not added, limit exceeded.
Node list entry already exists.
Node list entry does not exist.
Remote location name not in correct format.
Internet address &1 not valid.
Network server configuration &1 not created.
Network server configuration &1 not changed.
Network server configuration &1 not found.
Option &1 not valid for network server configuration &2.
Network server configuration type &2 is not valid.
Password matches the previous value.
Errors processing network server configuration &1.
Object &2 in library &3 not found.
Not authorized to object &2 in &3.
Cannot allocate object &2 in library &3.
Object &2 in library &3 damaged.
Object &2 in library &3 destroyed.
Cannot perform function for object &2 in library &3.
One or more libraries in library list deleted.
Cannot allocate one or more libraries on library list.
Library &1 cannot be accessed.
&1 routine in &2 module detected an exception. The exception return code was &3.
Object &1 in library &2 not available.
Object &1 in library &2 can not be in an independent auxiliary storage pool.
Binding directory &1 in library &2 not found.
Library &1 not found.
Program &1 in library &2 not found.
File &1 in library &2 not found.
Record format &3 in file &1 not found.
Device &1 not found.
Member &5 file &2 in library &3 not found.
Floating point format not valid.
&1 objects may not be restored into a secondary language library.
Object &2 in library &3 not created.
Object &2 in library &3 not created.
Storage needed is larger than maximum size for object &1.
Not authorized to use library &1.
Not authorized to program &1 in library &2.
Not authorized to file &1 in library &2.
Not authorized to data area &1 in library &2.
Not authorized to command &1 in library &2.
Not authorized to device &1.
Cannot allocate file &2.
Object &1 cannot be created or moved into &2.
Not authorized to module &1 in library &2.
Auxiliary storage pool &1 not found.
Not authorized to binding directory &1 in library &2.
Cannot assign library &1.
Cannot assign device &1.
Function not supported for DDM file &2.
*CURASPGRP or *ASPGRPPRI specified and thread has no ASP group.
Input file &1 in library &2 is not a source file.
Wrong source type.
Attempt to close DMCQ entry failed.
Attempt made to override file &1 to MBR(*ALL).
User profile storage limit exceeded.
Object &1 not created.
Object &1 not created.
Override not found at specified level.
Overrides not found for file &1.
Object &1 in library &3 type &2 cannot be accessed.
Error occurred while opening file &1.
Error while processing file &1 in library &2.
Error occurred while closing file &1 in library &2.
Cannot open file &1 in library &2 member &3.
Error while processing file &1 in library &2 member &3.
Override of printer file &1 not allowed.
Overflow value for file &1 in &2 too small.
Page size too narrow for file &1 in &2.
Record in use by another job.
File &1 in library &2 not correct type.
File &1 in library &3 contains no members.
Error occurred during output file processing.
Output file &1 created in library &2.
Member &3 added to output file &1 in library &2.
OUTPUT(*OUTFILE) not valid with OUTFILE(*NONE).
System-supplied output file &1 not valid.
Format of output file &1 in library &2 not valid.
Source file record length too long.
Output file name required when output member specified.
Object &2 type *&5 already exists in library &3.
Error occurred while processing.
Program or service program &1 in library &2 ended. Reason code &3.
ASP status is preventing access to object.
File override caused I/O buffer size to be exceeded.
Resources exceeded on ASP &1.
Protected library &2 cannot be modified.
Function not supported, request rejected.
No online help information available.
&1
&1.
Error occurred during processing of command.
Cannot find object to match specified name.
Not authorized to &1 command or API.
Not authorized to PRTINTDTA command.
Thread restrictions exist for some other process.
Not authorized to &1
IP address not valid.
Function currently not supported.
Request check. &1 unmonitored by &2 at &3.
PTF index is about to be destroyed (C G)
Unable to determine existence of PTFs for product &1 (C G).
Job CCSID not supported.
Function check. &1 unmonitored by &2 at statement &5, instruction &3.
Public nickname &1 in use.
Unexpected error occurred during termination of operating system installation.
Values passed to QOKDSPX4 not valid.
Public nickname &1 not found.
Nickname &1 not found.
Not authorized to remove public nickname &1.
Not authorized to change public nickname &1.
Not authorized to rename public nickname &1.
Nickname function not successful.
Distribution list &1 &2 not changed.
Distribution list &1 &2 not renamed.
Error occurred with QOKSCHD API. Reason code &1.
Error occurred with &5 API. Reason code &1.
Not authorized to controller &1.
Not authorized to line &1.
Cannot rename line &1 at this time.
Cannot rename controller &1 at this time.
Cannot rename device &1 at this time.
Line &1 already exists.
Line &1 no longer exists.
Controller &1 no longer exists.
Cannot add more controllers to line.
System name and station address not unique.
Error on controller. Cannot add devices.
Cannot add remote system to another remote system.
Cannot add more controllers to line on secondary system.
Port not found for specified line type.
Line must have secondary data link role.
Cannot add line &1. See previous messages.
Cannot add remote system &1. See previous messages.
Line must have primary data link role.
Cannot add a device to a line.
Cannot add a controller to a controller.
Cannot add a controller to a device.
Cannot add controller &1 to line &2.
Cannot add a device to a device.
Device &1 no longer exists.
Error occurred in source debugger.
Breakpoint added to line &4.
Source not available.
No programs in source debugger.
No breakpoints exist.
Program and library names are required.
Line number is required.
Watch number &1 added.
Internal debugger error while adding watch.
Watch number &1 cleared.
Internal debugger error while clearing watch.
All debug watches cleared in this job.
Internal error in source debugger.
String &1 not found.
Program &1 cannot be debugged.
Option &6 not valid for list entry.
Breakpoint removed from line &4.
Breakpoint replaced at line &4.
Line &4 not valid.
Program &1 added to source debugger.
Object type not valid.
OPM source debug support not active.
Program &1 not available.
Library &2 not available.
Program &1 already in source debugger.
Program &1 removed from source debugger.
File &1 not available.
Cursor not on source text.
Breakpoint not found.
Breakpoint not found.
Breakpoint at line &4 &9 &10
Unmonitored exception at line &4 &9 &10
Program &1 qualified at line &4.
Step completed at line &4 &9 &10
Breakpoint condition failed at line &4 &9 &10
All breakpoints removed from program &1.
No equates defined.
Module &3 not found.
Name &1 not defined.
No argument specified.
Abbreviation or command does not exist.
Error occurred during operation.
Variable not found.
All breakpoints removed from program &1.
Breakpoint added to statement &5 of procedure &8.
Breakpoint removed from statement &5 of procedure &8.
Breakpoint replaced at statement &5 of procedure &8.
Breakpoint at statement &5 of procedure &8 &9 &10
Unmonitored exception at statement &5 of procedure &8 &9 &10
Step completed at statement &5 of procedure &8 &9 &10
Breakpoint condition failed at statement &5 of procedure &8 &9 &10
Statement &5 does not exist in procedure &8.
Procedure &8 does not exist.
Action not available without source view.
Program &1 qualified at statement &5 in procedure &8.
ILE debug not allowed from batch job.
Syntax error in debug command.
Program type value is not valid.
Breakpoint not removed from line &4.
Breakpoint not removed from statement &5 of procedure &8.
Watch number &1 failed.
Watch number &1 at &2 &3, variable: &4 &20 &21
No watches exist.
Warning. Threaded job not stopped.
Program &1 was changed since it entered debug mode.
Step into not available.
Clear watch not available.
Current thread changed to &1.
No modules or class files on call stack are under debug.
Thread &1 enabled.
Thread &1 disabled.
All threads enabled.
All threads disabled.
No threads enabled.
Breakpoint added to line &4.
Breakpoint removed from line &4.
Breakpoint replaced at line &4.
Class file qualified at line &4.
Class file added to source debugger.
Class file already in source debugger.
Class file removed from source debugger.
Source file not available.
All breakpoints removed from class file.
Breakpoint not removed from line &4.
Breakpoint not found.
Display module command not valid.
Class file was changed since it was added to debug.
Breakpoint at line &4 &9 &10
Step completed at line &4 &9 &10
Breakpoint condition failed at line &4 &9 &10
Statement &5 does not exist in procedure &8.
Procedure &8 does not exist.
Library name of *LIBL required.
Unmonitored exception at line &4 &9 &10
Unmonitored exception at statement &5 of procedure &8 &9 &10
Breakpoint at statement &5 of procedure &8 &9 &10
Step completed at statement &5 of procedure &8 &9 &10
Breakpoint condition failed at statement &5 of procedure &8 &9 &10
Action not available without source view.
Class file qualified at statement &5 in procedure &8.
Breakpoint not removed from statement &5 of procedure &8.
Breakpoint added at statement &5 of procedure &8.
Breakpoint removed from statement &5 of procedure &8.
Breakpoint replaced at statement &5 of procedure &8.
SMTPRTE User ID and Address &1 &2 is not defined in System Distribution Directory
An Internet Address was specified in the TOINTNET parameter but there is no route SMTP gateway.
At least one recipient must be sepcified on TOUSRID or TOINTNET.
TOINTNET not allowed when TYPE(*MSG) is specified
Length limit exceeded while building the distribution subprofile.
The limit on the number of mail items queried has been reached.
When TYPE(*LMSG) is specified, text must be entered for LONGMSG.
Decryption with PKA private key failed.
Unable to extract public key.
An error occurred during exit program post-processing.
An error occurred during exit program pre-processing.
The nonce length is not valid.
Length of associated data not valid
Stream file failed on read.
Stream file failed to open.
Keystore &1 in library &2 was not translated due to exit program cancel.
Keystore record was not deleted due to an exit program cancel.
Master Key &1 was not set due to an exit program cancel.
Master Key &1 was not cleared due to an exit program cancel.
Keystring not valid hexadecimal value.
A pending value exists for a master key.
The verification failed.
Key store file requires recovery.
Key record could not be translated.
Operation not valid for this key type.
Error occurred while openning the certificate store.
Key is protected by a cryptographic coprocessor.
Internal error occurred retrieving key from system certificate store.
Function is disallowed with specified key context.
Error occurred while setting attributes on key store file.
Record label already exists.
User not authorized to key store file.
Error opening key store file.
Key record not found.
Digital Certificate Manager is not installed.
Not authorized to use application identifiers.
RSA key identifier was not found.
Key store file not found.
Key store file is not available.
File is corrupt or not a valid key store file.
Application identifier length is not valid.
The format of the PEM certificate is not valid.
A key requires translation.
One or more keys could not be decrypted.
Disallowed function value not valid.
Master key ID is not valid.
Master key version is not valid.
Version &2 of master key &1 is not set.
No key parts have been loaded.
CCSID of passphrase is not valid.
Length of passphrase is not valid.
Qualified keystore file name is not valid.
Public authority not valid.
Key store file not created.
Record label not valid.
Error occured writing to the key store file.
Error occured reading record from key store.
Error occured deleting record from key store.
Derived key length is not valid.
Iteration count is not valid.
Salt length is not valid.
Passphrase length is not valid.
PEM certificate length is not valid.
Certificate label length is not valid.
Distinguished name length is not valid.
Number of key store files not valid.
Key-encrypting algorithm context not compatible with key-encrypting key context.
Unable to decrypt data or key.
A key-encrypting algorithm context token does not reference a valid algorithm context.
A key-encrypting key context token does not reference a valid key context.
Algorithm not valid for encrypting or decrypting a key.
The output parameter specifies a NULL pointer.
The input parameter specifies a NULL pointer.
The total length of data in the input data array is not valid.
Length of D-H (Diffie-Hellman) public key not valid.
Length of D-H (Diffie-Hellman) parameters not valid.
The length of area provided for signature is not valid.
Pad character not valid.
A data length is not valid.
A data pointer is not valid.
Clear data format name not valid.
Input data format name not valid.
Algorithm description format name not valid.
Key description format name not valid.
Length of clear data not valid.
Length of input data not valid.
Length of area provided for output data is too small.
The key-encrypting key context for the specified key is not valid or was previously destroyed.
The key-encrypting algorithm context for the specified key is not valid or was previously destroyed.
Effective key size not valid.
Unexpected return code &1 from cryptographic service provider &2.
The key string or Diffie-Hellman parameter string is not valid.
D-H (Diffie-Hellman) parameters not valid.
The key string length is not valid.
Cipher algorithm not valid.
Block length not valid.
Hash algorithm not valid.
Initialization vector or counter not valid.
MAC (message authentication code) length not valid.
Mode not valid.
Pad option not valid.
PKA (public key algorithm) block format not valid.
Public key algorithm not valid.
Key type not valid.
Key form not valid.
Key format not valid.
Key size not valid.
Public key exponent not valid.
Cryptographic service provider not valid.
Final operation flag not valid.
Reserved field not null.
The signature verification failed.
Operation, algorithm, or mode not available on the requested CSP (cryptographic service provider).
The algorithm context token does not reference a valid algorithm context.
The algorithm context is not found or was previously destroyed.
Algorithm in algorithm context not valid for requested operation.
The key context token does not reference a valid key context.
The key context is not found or was previously destroyed.
Key can not be encrypted.
Algorithm context not compatible with key context.
Cryptographic device name not valid.
Cryptographic device not found.
Multiple-block encryption not valid with the requested mode.
Cryptographic service provider (CSP) conflicts with the key context CSP.
The key-encrypting algorithm or key-encrypting key parameter is not valid.
Not authorized to device.
Cryptographic device not available.
Request not allowed by cryptographic attributes.
Cannot add license information.
License information already exists.
Product definition for product &1 &2 feature &3 cannot be found.
Feature &3 not valid.
Usage type &1 not valid.
Compliance &1 not valid.
Default usage limit &1 not valid.
License term &1 not valid.
Allow license release not valid.
Allow grace period value of &1 not valid.
Allow license release &1 not valid.
Grace period &1 not valid.
Feature message identifier &1 not valid.
Vendor password &1 not valid.
License information not retrieved.
License information not available.
More than one release found.
License user handle not correct.
Error in license management function.
Usage limit exceeded - operator action required.
Attempt made to exceed usage limit for product &1. User not added.
IBM i User entitlement limit exceeded.
License information conflict found.
License user parameter not valid.
License Management object damaged.
Length of license user is not correct.
Attempt made to change length of the license user, resulting code &4.
License user &4 not released.
&4 license users not released.
Usage limit cannot be changed for *KEYED compliance product.
Message queue *OPSYS not allowed for operating system.
Product &1 license term &2 feature &3 not found.
LICTRM(*ONLY) cannot be specified.
Usage limit cannot be less than current usage.
License information not changed.
Usage limit &1 not valid.
Product &1 &2 feature &3 not found or not correctly installed.
Vendor password not correct.
Processor group must be specified.
Serial number must be specified.
License key not generated.
License term &1 not valid.
License Repository object damaged.
&1 license key information records added, &2 not added.
&1 license key information records removed, &2 not removed.
License key information not found.
Expiration date &1 is not valid.
Usage limit not valid.
License key information not added for &1.
License key information not removed for &1.
License key information not installed for product &1.
Product &1 license term &2 feature &3 not found.
License key information not found in license key file.
The license key cannot be used for processor group &2.
Feature &3 not valid.
Product identifier &1 not valid.
Grace period expired. Requesting user already added.
Grace period expired. Requesting user not added.
Usage limit of &4 exceeded. Grace period expires in &6 days on &5.
Expiration date &4 was reached.
License key not valid.
The license key for product &1, license term &2, feature &3 is no longer valid.
Cannot specify different number of uses than already requested.
IBM i usage limit exceeded - operator action required.
Cannot release different number of uses than requested.
IBM i grace period expired.
IBM i grace period expires in &6 days on &5.
IBM i license key not valid in &8 days on &9.
IBM i usage limit exceeded - operator action required.
Error occurred during restoring license keys from tape.
Cannot install keys for product &1.
License key not valid.
Expiration date &2 is not valid.
No enterprise keys found in license repository.
License key &1 not valid for serial number &2.
Enterprise license key not valid.
Product &1 not found.
Alternate usage limit cannot be less than current usage.
Counting users across system partitions &1 not valid.
License user parameter not valid.
Requested action &1 not valid for feature &2.
IBM i Application Server processor usage limit exceeded.
Length of resulting signature area is too small to hold results.
Signature parameter is not in a supported format.
Certificate is not in a supported format.
Certificate with label &2 not found.
Buffer has a signature that is not valid.
Operation not supported due to lack of cryptographic hardware.
Function &1 cannot be used.
QVFYOBJRST system value does not verify object signatures during restore at its current setting.
&1 command failed to report errors.
Attempt to sign or verify buffers failed with unexpected return code &1.
Certificate with label &2 is already in the certificate store.
Certificate is not in a supported format.
A Certificate Authority (CA) certificate cannot be added using this API.
The issuer of the certificate may not be in the certificate store. Certificate was not added.
The information requested by &1 for the specified selection criteria is too large to be returned.
API &1 requires too much information to be collected prior to sorting.
Object already in use.
Error handling ended before completion.
Unable to set return value or error code.
*ADD authority required to owner's user profile.
Insufficient authority to replace object. Object is &1.
The system detected an error that was not handled.
Home directory not found for user &1.
Matching quote not found in path name.
Path name contains null character.
Path name pattern not valid.
Pattern not allowed in path name.
TABEXPN(*YES) not valid with ENDLINFMT(*FIXED).
Path name cannot begin with *.
Pattern not allowed in path name directory.
Request information value is not valid.
More than one name matches pattern.
User profile storage limit exceeded.
Pattern not allowed in user name.
Path name not converted.
Name matching pattern not found.
Path name not specified.
Stream file not copied.
Stream file copied to object with truncated records.
Object not copied. Object is &1.
The CCSID of the target file could not be set to match the CCSID of the source file.
The requested convert directory option cannot be performed.
Errors occurred during directory conversion.
File system error occurred. Interface &1.
Not authorized to object. Object is &1.
Error occurred in program &1.
Object in use. Object is &1.
Object damaged. Object is &1.
Object already exists. Object is &1.
An input or output error occurred.
Information passed to this operation was not valid.
Path name resolution causes looping.
Too many open files for process.
Too many open files.
Number of links exceeds maximum allowed for the file system.
Path name too long.
Operation not allowed in a job running multiple threads.
Object not found. Object is &1.
Error occurred while attempting to obtain space.
Operation failed for object. Object is &1.
Directory contains objects. Directory is &1.
Function not supported by file system.
An error occurred while trying to resolve object name.
Problem occurred while setting attributes from parameters.
Request not allowed to operate from one file system to another.
Requested operation not allowed. Access problem.
No objects satisfy request.
TODIR and TOOBJ parameters were specified. Only one is allowed.
NEWOBJ parameter cannot start with a slash.
The NEWOBJ parameter cannot contain path.
TOOBJ parameter is not allowed with a pattern in OBJ for CPY.
&3 object links removed. &4 object links not removed.
&3 objects moved. &4 objects failed.
Cannot use *INDIR with other values for DTAAUT or OBJAUT.
OBJAUT must be *NONE if DTAAUT is authorization list or *EXCLUDE.
&1 objects copied. &2 objects failed.
Value of *NONE cannot be specified for both DTAAUT and OBJAUT parameters.
&1 links removed. &2 links failed.
&3 objects checked in. &4 objects failed.
&3 objects checked out. &4 objects failed.
Buffer overflow occurred.
CCSID &1 not valid.
Value &1 for follow symbolic links parameter is not valid.
Must specify *SAME as only object authority value.
Object not a file. Object is &1.
Cannot change directory views parameter.
&1 file system failed to mount.
&1 directory failed to create.
Value &1 for check indicator parameter is not valid.
Value &1 for remove indicator parameter is not valid.
Value &1 for link type parameter is not valid.
Value &1 for new audit parameter is not valid.
Value &1 for copy operation parameter is not valid
Value &1 for target file owner parameter is not valid.
Error occurred with path name parameter specified.
Error occurred determining the current directory.
CCSID conversion error occurred.
Code page cannot be converted to a CCSID.
TODIR not allowed with TOOBJ.
cmask parameter is not valid.
File system error occurred. Error number &1.
File system may be unusable.
RCLSTG deleted object &2.
&1 &2 linked in &3 directory as &4.
Object ownership transferred for &1 in &2.
Character string not converted.
Object is a directory. Object is &1.
Object not a QSYS.LIB object. Object is &1.
Object not a QDLS object. Object is &1.
Function was interrupted.
Object type not valid for request. Object is &1.
Error reclaiming objects in directories.
File ID conversion of a directory failed.
The file ID table is damaged.
System unable to establish a communications connection to a file server.
The requested operation could not be completed.
The communications connection with the file server was abnormally ended.
The communications connection with the file server was abnormally ended.
Object handle rejected by file server.
System cannot establish a communications connection with a file server.
Object has failed a scan. Object is &1.
Operation failed to access the system scan information. Reason code &1.
Scan key &1 does not exist.
Invalid scan key signature &2 specified.
Object not created, reason code &2. Object is &1.
&1 option not supported.
Directory failed to create. Object is &1.
&1 of &2 object links reclaimed with &3 of &4 problems corrected.
Kernel environment not initialized.
IP over SNA interface added but not started.
RMTDEST parameter value &2 not valid.
LOCTPL parameter value &3 not valid.
Error occurred processing file.
IP over SNA interface &1 not started.
Internet address not converted.
IP over SNA type of service not changed.
SUBNETMASK parameter value &2 not valid.
IP over SNA interface &1 not ended.
SNA network identifier and location name not converted.
&1 configuration not printed.
No associated SNA network identifier and location name found.
No associated internet address found.
IP over SNA not activated.
IP over SNA activated; however errors occurred.
IP over SNA deactivated; however errors occurred.
Internal system error in program &1.
SNA location name &1 not valid.
Network ID &1 not valid.
IP address return criteria &1 not valid.
Unrecognized option found on options list.
Duplicate option found on options list.
Incorrect combination of options flags specified.
DIR parameter not allowed with the -A option flag.
An internal error has been detected by the Network File System (NFS).
An NFS server daemon has unexpectedly ended.
Unable to release locks, reason code &1. Object is &3.
Unable to open &1.
*IOSYSCFG authority required to use &1.
Unable to determine if the &1 NFS server daemon started within the timeout value specified.
&1 is not a user-defined file system.
An option value on the options list was not valid.
Start of NFS server daemon or daemons failed.
Unable to determine if the &1 NFS server daemon ended within the timeout value specified.
End of NFS server daemon or daemons failed.
Object &1 is not accessible.
Object &1 is not accessible.
Internal file system objects are in error.
User-defined file system &1 cannot be created into user ASP &2.
DIR parameter required with the specified option flag.
DIR parameter or -A option flag required with -U option flag.
Object is a read only object. Object is &1.
The value supplied for the File system to mount (MFS) parameter does not have the correct form.
Could not process object &1.
Error occurred while attempting to change the UID or GID information.
Start of RPCBind daemon failed.
End of RPCBind daemon failed.
The RPCBind daemon has unexpectedly ended.
RPCBind daemon has an unrecoverable system error.
A failure occurred while processing the /etc/netconfig file.
Cannot find an address for the specified system name.
The default job coded character set ID (CCSID) could not be converted to an equivalent ASCII CCSID.
Resource category &1 is not valid.
Resource name &1 is not valid.
Format name &1 is not appropriate for resource identified by resource name &2.
Command buffer is full.
Command buffer or input buffer parameters required.
Error occurred during screen I/O operation.
Data-stream error &1 reported for screen I/O operation.
Cannot add operation to command buffer.
Command not supported by current device.
Screen position &1,&2 outside of display or window area.
Attempt to write data past end of display.
Invalid cursor position in command buffer.
Field length &1 not valid.
Invalid starting address for field.
Maximum allowable number of fields exceeded.
Invalid screen attribute.
Invalid field format word.
Required parameter not specified.
Error message data/screen attributes exceed display width.
Buffer size parameter error.
Command buffer already contains an input operation.
Memory allocation error.
Roll parameters not valid.
Saved data not valid.
Cannot deallocate memory dynamically.
Error calling exit routine.
No data in input buffer.
Incorrect field number value &1 specified.
From position &1,&2 greater than to position &3,&4.
Incorrect value for control character byte &1.
Attempt to write outside of window area.
Required parameter &1 omitted.
Pointer parameter is null.
Operation not first command in command buffer.
Incorrect display mode &1 specified.
Window area definition is incorrect.
Screen must be redrawn.
Low level environment description value incorrect.
Window mode indication value must be '0' or '1'.
Input data for query operation incorrect.
Buffer type incorrect.
Buffer type mismatch.
Buffer handle incorrect.
Incorrect field control word.
Parameter &1 not positive integer value.
Low level environment handle incorrect.
Screen address parameter error.
Command buffer contains an input operation.
Field type not supported by current device.
No room to write data.
Incorrect operation before QsnWrtSFMin.
Undefined field ID &1.
Field ID definition value &1 not a positive integer.
Command buffer does not contain an input operation.
Error occurred during data conversion.
Operation not supported with double-byte data.
Length &2 of structure incorrect.
No matching shift-in or shift-out character found.
Write operation not successful.
The file &2 in library &3 is not valid. Reason code &1.
The invite active flag is not valid.
Operation for field ID &1 not valid.
Window description value is incorrect.
Window does not fit on screen.
Specified window is not active.
Window dimensions not within window limits.
Window does not have a message line.
Error occurred retrieving message text.
No current window defined.
Window handle incorrect.
The value for parameter &1 must be '0' or '1'.
Window services attributes description value is incorrect.
Session description value is incorrect.
Command key exit routine list not on 16-byte boundary.
Scroller not printed.
No more rows to roll in scroller.
Session handle is incorrect.
Data for scroller is too long.
Scroller display is not valid.
Error calling the command key action routine.
Data not compatible with session input line.
Path name was not found on network server &1.
Resource failure accessing server &1.
Unexpected error received from network server &1.
Permanent alias &1 already exists.
Permanent alias &1 was not found.
ASPDEV value not valid with value specified for ASP.
Server &1 was not found.
Session &1 does not exist on server &2.
Requester ID &1 is not a valid name.
Temporary alias &1 already exists on network server &2.
Option &1 not valid for specified entry.
Path is not known or not valid.
Server &1 ended because of object damage.
Server &1 ended because object is in use.
Server &1 ended because server description not found.
Server &1 not found.
Server &1 ended because of a connection failure.
User profile updates suspended for server &1.
Server &1 ended due to errors starting services.
Monitor job for server &1 ended unexpectedly.
Server &1 not active
Session &1 not active.
Alias &1 not created.
Network server alias &1 not changed.
Network server alias &1 not deleted.
Network server alias &1 not displayed.
Temporary alias &1 was not found on network server &2.
Storage space &1 not created.
Object &1 already exists.
Storage space &2 not found.
Storage space &1 was not deleted.
User or workstation name &1 was not found.
Data returned from the command truncated.
Error on network server &1 for submitted command.
Storage needs exceed maximum for user profile &1.
Storage space &1 is not available for deletion.
Network server &1 statistics not displayed.
Error building conversion tables for server &1.
Network server users not displayed.
Network server sessions not displayed.
User profile &1 can not be enrolled to server &2.
Network server command not submitted.
Network server message not sent.
Storage space &1 not displayed.
The request to add remote server &1 failed.
Error accessing Network Server attributes.
Unexpected error received from network server &1.
Error processing link or unlink request for NWSD &1.
NetWare server installation not successful.
Network server attributes not changed. See previous messages.
Network server user attributes for user profile &1 not changed. See previous messages.
Server name too long.
Network server attributes not displayed.
Network server user attributes not displayed.
Error accessing Network Server attributes for user &1.
Incorrect command sent to network server &1.
Requested user profile &1 does not exist.
Network server users not displayed.
Error accessing synchronization information for &1.
System profile synchronization job ended abnormally.
Profile synchronization job ended abnormally.
Error code &5 while synchronizing profile &7.
Error retrieving queued profile requests.
Profile synchronization job ended abnormally.
System profile synchronization job ended.
Error accessing authentication data for user profile &1.
Partition operation failed for storage space &2 on server &1.
Error setting synchronization status of profile &1.
QNETWARE profile may not be defined as *GROUP.
Unexpected error &2 during profile synchronization.
Profile &1 may not be defined on server.
Error checking synchronization of profile &1.
Unable to complete command processing on server &1.
The product you are trying to use is not installed properly.
The product you are trying to use is not installed properly.
Network server description &1 not found.
Error updating synchronization information.
Server storage space &1 in library &2 not found.
Object &1 in &2 type *&3 in use.
Network server &1 must be varied off.
Storage size specified is invalid.
Server storage space &1 can not be unlinked.
Server storage space &1 can not be linked.
Path name of file not found: &3.
File not found: &3.
Server storage space &1 in library &2 not valid.
Internal error processing file &3.
Server storage space &1 in library &2 not found.
I/O failure processing file &3.
Error processing file &3.
Retrieval of information from the NWSD user space failed.
Application information not updated in NWSD user space.
Application specific information not set in NWSD.
Application specified is not installed.
&1 unavailable for user enrollment.
Group type for domain &1 cannot be changed.
Server storage space &1 in &2 already exists.
Error during server storage initialization.
Storage space &2 not changed.
Incorrect NWSSIZE value specified for storage space &2.
Trap manager input message not valid.
Trap manager not started.
SNMP trap message could not be processed.
SNMP message type on internal trap manager queue is not valid.
Trap manager job not active or being ended.
Data queue &1 does not exist.
Trap data cannot be retrieved.
Trap manager cannot connect to sockets.
Input variable binding total length is not correct.
Data queue &1 is full.
Insufficient space for trap data.
Trap forwarding cannot be started.
Trap manager job already active.
Input variable-binding object identifier not valid.
Command timed-out.
Community name length parameter is not correct.
Node name IP address not correct.
Unknown host.
Out of memory.
Input variable-binding value not valid for data type specified.
Input variable-binding value type not valid.
Cannot decode incoming response message.
Cannot encode outgoing request message.
Internal processing error.
Node name length not correct.
Node type not correct.
Receiver variable pointer not valid.
Time-out parameter not correct.
Value for number of input variable-bindings parameter not correct.
System socket error.
Root directory found damaged at IPL.
Hidden system root directory found damaged at IPL.
Root directory recovery failed.
Recovery for &1 failed. Object type &2. Operation code &3.
Directory object level recovery failed.
Directory &1 found damaged.
File ID table mismatch.
The permanent File ID table was not found.
Temporary file ID table mismatch.
File Identifier table recovery complete.
&1 file identifier table entries removed.
Upgrade environment was not found.
Upgrade environment not set. The environment specified already exists.
Upgrade environment information not changed. Upgrade environment already set to &1.
Errors occurred while setting upgrade values.
Unable to remove required selections.
Upgrade environment not set. The environment was not found.
Unable to select additional options without *BASE option.
Error occurred while saving libraries at priority &1.
Not all libraries saved from priority group &1.
Error occurred during upgrade task &1.
Task &1 cannot be selected at this time.
Enhanced Upgrade Assistant for i5/OS task &1 failed.
Error occurred while printing system information.
Error occurred while resetting upgrade values.
Required information not available to reset upgrade values.
Errors occurred while retrieving system information.
Library &1 is not a user library.
*END must be specified for the MAXTIME parameter.
Disk preparation job not scheduled. Disk preparation job already exists.
Gather upgrade information must run before displaying disk preparation status.
Error occurred during disk preparation function.
Use the Start Disk Preparation (STRDSKPRP) command to prepare disk storage.
Enhanced Upgrade Assistant for i5/OS function in use.
Error occurred during function.
Error occurred during Enhanced Upgrade Assistant for i5/OS function.
Error occurred when sending break message. Message not sent.
Errors occurred on SBMJOB command.
Cannot retrieve unsupported hardware list.
Cannot retrieve product information.
No objects converted in library &1.
Request did not complete. System not IPLed using IPL source B.
Unable to save or restore system values.
Current upgrade preparation information not found.
File &1 is in use and cannot be accessed.
Not all eligible objects in library &1 converted.
Cannot retrieve disk storage estimates.
Error occurred updating system information for type &1.
Error occurred with the option.
Upgrade Preparation cannot be run at this time.
Upgrade information not complete.
Error occurred during object conversion management.
Current upgrade preparation information not found.
Error occurred configuring media devices.
Error occurred while updating user profile storage.
Upgrade values reset, but errors occurred.
Environment variable name exists.
Environment variable does not exist.
ENVVAR character not valid.
Unexpected error occurred.
Maximum number of environment variables exist.
Value not retrieved.
&1 IPC objects deleted; &2 IPC objects not deleted.
Delete control not valid.
IPC object &1 does not exist.
Error on command &1.
A User Trace option could not be changed for job &3/&2/&1.
The User Trace buffer associated with job &3/&2/&1 could not be dumped.
Job &3/&2/&1 not unique.
The User Trace buffer associated with job &3/&2/&1 could not be deleted.
*JOBCTL special authority required to update system-level environment variables.
Path name for program required by QP0ZCALL.
Object not a program. Object is &1.
Attribute &1 for resource &2 type &3 not allowed to be monitored.
Monitored resource entry already exists for &1.
Monitored resource entry not found.
Resource &1 of type &3 is not valid. Reason code is &5.
Value specified for Manager Type not valid.
Length specified in parameter &1 not valid.
Field value within structure is not valid.
Attribute &1 specified more than once.
Length of monitored resource name not valid.
Length of server information not valid.
Internal error in procedure &2. Reason code is &1.
Resource &2 not found or not supported.
Number of attribute names not valid.
Library name &1 not valid.
Request &1 not supported with specified cluster version and modification level.
Combination of parmameter values not valid.
*AGG not allowed for resource type *ETHLIN.
Cluster administrative domain error occurred.
Resource name must be *VRT.
RSRCNAME attribute must be specified for &1.
Debug server router function already active.
Debug server router function not active.
Debug server router function ending.
One or more errors occurred on STRDBGSVR command.
An error occurred using the control socket for the debug server.
Internal error in program &1. Return code &2.
An error occurred while starting a debug server job. The error code is &1.
An error occurred while trying to open the router port. The error code is &1.
Program &1 in &2 type *&3 has more than one module with the same name.
Debug server started.
Debug server router function ending.
An error occurred while trying to create the listening socket for the debug server.
An error occurred using the control socket for the debug server.
An error occurred while doing a socket operation for the listening socket of the debug server.
One or more errors occurred during the startup of the debug server.
An error occurred while trying to bind to the debug server router port.
File server job ended abnormally.
Internal file server error occurred.
Required server subsystem job has ended.
File server job ended abnormally.
File server communications error occurred.
File server subsystem could not be started.
File server job could not be started.
File server job could not allocate the conversation.
File server communications error occurred.
File server error.
Internal error Reason Code &1 occurred.
The exit program does not allow you to perform the requested function.
Exit program &1 could not be found in library &2.
You are not authorized to the exit program &1 or library &2.
An error was detected in the exit program &1 in library &2.
Unable to establish connection from &1 to &2.
User profile &1 not found on remote location &2.
Remote location &1 not found.
Remote location &1 cannot be source location.
ObjectConnect internal error, function code &1, return code &2.
Corresponding source information from location &1.
Location name &1 unable to close &2.
Following messages are from remote location &1.
Unable to establish connection from &1 to &2.
Job &4/&3/&2 from location &1 ended.
FRCOBJCVN(*SYSVAL) must be used with TGTRLS(*V3R1M0).
An error occurred during the SAVRSTLIB operation.
An error occurred during the SAVRSTDLO operation.
An error occurred during the &1 operation.
ObjectConnect communications session ended. Reason code &1.
ObjectConnect failed. &1 must be varied off and on.
ObjectConnect request not accepted.
APPC failure. Failure code is &3.
Error during session initialization. Reason code &1.
Data stream received at system &1 not valid.
OptiConnect controller not found for remote location &1.
OptiConnect verification test completed with errors.
No OptiConnect remote systems found.
Request to end remote OptiConnnect JOB &1 on &2 did not complete.
Protected Conversation *YES and Device or Mode QYCTSOC is not allowed
Remote location value exists in more than one device description
The OptiConnect QSOC subsystem must be active.
OptiConnect communication error.
OptiConnect path open error.
OptiConnect path not valid or closed.
OptiConnect detected sequence error.
OptiConnect API internal error, function code &1, return code &2.
Request variable not valid, reason code &1.
OptiConnect API open path error, function code &1, return code &2.
Program name not found.
Program library name not found.
User not authorized to program.
Open path rejected.
Remote system &1 not found or not valid.
Time-out occurred.
Transaction was terminated.
Cannot allocate &1 bytes.
Internal Application Error. Diagnostic code is &1
Internal Application Error. Diagnostic code is &1, Diagnostic data is &2.
Session &1 must be &2 before it can be &3. It is currently &4.
Session &1 is not active.
STRPEX command was not successful. Reason code is &1. See details for more information.
ENDPEX command was not successful. Reason code is &1. See details for more information.
Definition not changed.
CRTPEXDTA command was not successful. Reason code is &1. See details for more information.
Library &1 not found.
Collection &1 was not found
Device &1 was not found
Device &1 not ready
&1 option not valid when TYPE(*HDW) is specified
Definition not found.
Hardware type session is already active.
Definition or filter already exists.
Unable to locate program, object, library, or file member as specified in the definition or filter.
Collection data &1 not found in library &2.
An error occurred below the MI that could not be handled by the application.
The data in the member specified does not match the type of report requested.
An SQL error occurred while generating the report. The SQL code is &1. PEX diagnostic code is &2.
A hardware session cannot be started with OPTION(*INZONLY).
A hardware session cannot be suspended or resumed.
There is not enough available storage to perform the requested function.
Module or procedure not found in the specified program.
Tried to save data to an incompatible data repository.
Option *SELECT for session id is only valid if the ENDPEX command is being run interactively.
Collection &1 is not compatible
ADDPEXDFN command was not successful. Reason code is &1. See details for more information.
The sampling interval is too large to be processed.
Module name cannot be blank if a procedure name is specified.
Network server application not ended for network server &4.
Network server application not started for network server &4.
Network server application not deleted.
Network server application not installed.
Network server application ended; however, errors occurred.
Network server application started; however, errors occurred.
Network server application deleted; however, errors occurred.
Network server application installed; however, errors occurred.
Unable to determine if network server application ended.
Unable to determine if network server application started.
Windows EIM source association already exists.
More than one EIM identifier defined for i5/OS user.
i5/OS target association not defined.
More than one Windows user profile source association defined.
Windows EIM registry name is not available.
Enterprise Identity Mapping (EIM) is not configured.
Enterprise Identity Mapping (EIM) processing error for user &1.
Syntax error on call to MSF API. Reason code &1.
Parameter value error on call to MSF API. Reason code &1.
Error occurred during running of MSF API.
Parameter error on call to MSF API. Reason code &1.
MSF API failed. MSF message identifier not found.
MSF API failed. Request not allowed.
MSF API failed. Parameter values not valid for exit point.
MSF validate data field exit program error occurred.
Error occurred on call to MSF exit point program.
MSF API failed. List cannot be expanded or replaced.
Reserved mail message identifier is not valid.
Reserved mail message identifier not used.
Reserve mail message identifier already used.
End mail server framework (MSF) job.
End processing MSF message.
Incorrect arguments for exit point program.
MSF job &4/&3/&2 ended. Reason code &1.
Exit point program returned with return code not defined.
Job &6/&5/&4 stopped processing MSF message.
Errors detected on MSF internal message index.
Errors detected on MSF internal message queue.
An error occurred in an MSF internal function.
Mail server function (MSF) job, QMSF, ended.
Retrieve exit information API error occurred.
STRMSF did not complete successfully.
ENDMSF did not complete successfully.
ENDMSF completed successfully; however errors occurred.
Mail Server Framework currently active.
&1 completed successfully.
Mail Server Framework Configuration API error occurred.
Mail server framework type &1 not configured.
Maximum types for type group &1 already exist.
Mail server framework type already configured.
Specified length for format is not correct.
Error occurred in Mail Server Framework.
Internal system error in program &1.
One or more input parameters is NULL or missing.
Certificate store does not exist.
Certificate store password is not valid.
User not authorized to certificate store.
Export file already exists.
An error occurred. The error code is &1.
User not authorized to directory or file.
The format name for the certificate store is not valid.
The format name for the export or import file is not valid.
Option &2 of the operating system is required to work with certificates.
Import file does not exist.
Import file password is not valid.
Duplicate key exists.
Configure PM Agent command ended in error.
PM Agent not started.
PM Agent already started.
PM Agent not active.
PM Agent already ending with *IMMED option.
PM Agent already ending with *CTRLD option.
If RSRCNAME(*SELECT) is specified, MODEM(*RSRCNAME) cannot be specified.
Parameter SERVICE required.
Parameter RMTSYS required when CNNTYPE(*RMTDIAL) or CNNTYPE(*MULTIHOP) specified.
Cannot change the connection type.
Requirements between parameters not satisfied.
Network server name &1 exceeds maximum length.
The directory &1 was not removed because there are open sessions to the associated server.
Directory &2 has not been created. Network server directory &2 already exists.
The network server &2 was not removed.
System information printed, but errors occurred.

Length: 276137 Date: 20200927 Time: 195040

Count: 1428     sap01-206 ( 2430 ms ) This documentation is copyright by IBM.