OS/400 Messages

Are you looking for the description of OS/400 (System i) messages e.g. CPF9801? Then you have come to the right place. Below you can see a (hoefully) complete list of of all OS/400 messages with all “second level texts”.

Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43


Complete OS/400 Messages Documentation From EDT6310 up to GLD0408

Complete OS/400 Messages Documentation From EDT6310 up to GLD0408

This documentation is copyright by IBM.
Count: 460 Skipped: 0
OS/400 Messages
Description
Client request - data stream version.
Client request - run program &2/&1.
Client request - run command &1.
The program's debug information was not created.
The program's debug information was not created.
The compiler did not build the debug information in the correct order.
The compiler did not build the debug information with the correct record type.
Program &1 in library &2 can not be found.
The program's debug information could not be found.
The compiler did not build the debug information in the correct order.
The compiler did not build the debug information in the correct order.
&1 user-defined characters have been copied to file &2.
&1 characters have been copied to the user-font file.
Error while opening work file.
Error while writing user-font file or dictionary file.
Format of work file not valid.
Work file is in use.
Unable to allocate work file for user-font file.
Unable to allocate user-font file or dictionary file.
Unable to access work file for user-font file.
Specified user-font file not found.
Error while reading work file.
Error while copying user-font file.
Work space for user-font files or dictionary files is full.
Directory for user-font files or dictionary files is full.
Error in Font Management Aid.
I/O error occurred while processing display file.
Error occurred while opening display file.
Error occurred while closing display file.
Work file member already exists.
Library QTEMP not found.
Work file for user-font file not found in library QGPL.
Work file member for user-font file not found.
User-font file not valid.
Double-byte character set display station is required.
Not authorized to use command &1.
Not authorized to change work file.
Font table &1 not found.
Error occurred while opening Font Management Aid work file.
Error occurred while closing Font Management Aid work file.
I/O Error occurred while accessing work file.
User storage limit exceeded. Request canceled.
Font table &1 is in use.
Library QGPL not found.
Work file for user-font file is in use.
Not authorized to change font table &1.
Not authorized to read font table &1.
Header statement not found.
The Header statement is not the first statement.
Output file type is not permitted.
More than one input file was specified for RA file output.
Input file is invalid for RA file output.
Output record length is too small for RA file output.
Maximum-control-field-length entry is not numeric.
Maximum-control-field-length entry is greater than 256.
RA file output specified, but control-field-length entry zero.
Final-ordering entry is invalid.
Alternate collating sequence entry is invalid.
Control field cannot be retained for RA or SORTA file output.
Control-field-output-option entry is invalid.
Reserved area of header statement contains an entry.
Entry in column 27 is not valid.
Output option entry is invalid.
Output-record-length-field entry is invalid.
Warning: File &1 in library &2 has unsupported field types. See Return Code &3 in the cause section.
Open failed for file &1 in library &2 mbr &3.
Alternate collating sequence specified but no description found.
ALTSEQ statements do not follow header statement.
Hex digits on ALTSEQ statement are invalid.
ALTSEQ statement contains embedded blanks.
Excess number of hexadecimal numbers on ALTSEQ statements.
Overflow-length entry invalid.
Excess number of summary fields specified for SORTRS file output.
Too many INCLUDE/OMIT statements found.
And/or entry not A, O or blank.
Column 7 not blank for first record statement in group.
Factor 1 start position entry invalid.
Field-end position is invalid.
Field length zero or negative.
The constant is longer than 20 characters.
Field length for character data exceeds maximum.
Field length for packed-decimal data exceeds maximum.
Field length for unpacked decimal data exceeds maximum.
Field length for zone data exceeds maximum.
Field length for digit data exceeds maximum.
Factor 2 start position is invalid.
Factor 2 end position is invalid.
Factor 2 length is not equal to factor 1 length.
Packed or unpacked decimal data specified, but factor 2 is not numeric.
Factor 2 constant is longer than factor 1 length.
Zone data is specified, but comparison operator is not EQ or NE.
Comparison operator is invalid.
Reserved area of record statement contains an entry.
Include-all is not the last statement in include set.
Factor 2 type is invalid.
Keyword specified, but factor 1 field length is not 2 or 6.
Factor 2 keyword is invalid.
Selective alternate collating sequence is invalid.
Factor 2 type invalid.
Field length is invalid.
Field length is invalid.
Field length is invalid.
No field statements found in front of group of record statements.
No field statements present.
Only field statements valid after include-all statement.
Field-type entry is invalid.
Data-field statement not allowed for RA file output.
Data type entry is invalid for forced control field.
Field-type entry is invalid with force statement.
Force statement extension is specified, but no previous force statement found.
Normal or opposite forced field cannot be followed by force-all statement.
Reserved area for force-into-data field or unconditional force contains an entry.
Field length is less than 1.
Constructed-control-field length exceeds maximum on header statement.
Control-field length not specified in field statement.
Field position on force extension not the same as on the previous force.
Force-field length greater than 1.
Reserved area contains entry.
Last statement is not a field or comment statement.
More than one field statement found for reconstruct operation.
Include-all not specified for reconstruct operation.
Control statements out of sequence.
Statement-type entry invalid.
Record or field-data-type entry invalid.
Alternate collating sequence specified, but data-type entry U or P.
Output-file type not supported, or file not found.
Record/field stmt end pos past input rcd end pos for &1 in library &2 mbr &3.
Resequencing cannot be completed.
Record or field data type entry invalid.
&1 error(s) found in source file &2 in library &3 mbr &4.
&1 records read and &2 records selected from &3 in library &4 mbr &5.
Input file at end during reconstruction of records.
&1 total records read, and &2 total records selected.
&1 records placed in output file &2 in library &3 mbr &4.
REQUEST SUCCESSFUL &1.
Active Sort Table not found.
&1 RA entries placed in output file &2 in library &3 mbr &4.
Active Sort Table is being rebuilt.
No read authority to Active Sort Table.
Active Sort Table does not contain current sort information.
Active Sort Table is invalid.
Print option defaults to 0.
Sort job defaults to SORTR.
Invalid entry in column 36 of header specification.
Invalid IGC entry.
No data specified and control field dropped.
Ascending sequence is default for column 18.
Output option X is default in column 28.
Alternate collating sequence S is default.
Ideographic control field is not specified on header statement.
No valid ALTSEQ statements found.
Column 7 defaults to blank.
Invalid continuation character in column 7.
OR continuation is default for column 7.
Data type entry is invalid.
Invalid data type entry.
Digit field length exceeds 16.
Character constant length exceeds maximum.
Same specification type assumed in column 6.
Zone specified-relationship not EQ or NE. Defaults to EQ.
Factor 2 type in column 19 is invalid.
Invalid factor 2 type in column 19.
Unpacked decimal field length exceeds 16. Defaults to 16.
Zone-field length exceeds 1.
Packed-decimal-field length exceeds 8.
Column 7 contains an invalid field type.
Control-field length less than header value.
Data-field length exceeds header value.
Specifications in wrong numerical order.
P or U factor 1 used with ALTSEQ.
More than one summary-V field in include set.
No summary specifications for summary sort.
Summary specifications ignored.
Constant in columns 20-39 is longer than data.
Columns 20-39 contain an invalid numeric constant.
Invalid override specified for file &1 in library &2.
*** ABNORMAL END *** &1.
5716SS1 R01 M00 880000 IBM SORT &1 Page &2
Input file(s), member(s) (from command) . : &1
Output file, member (from command) . . . : &1
Source file, member (actual) . . . . . . : &1
Print file (actual) . . . . . . . . . . . : &1
Options . . . . . . . . . . . . . . . . . : &1
*PRT *CHK *DUMP *SECLVL
*NOPRT *NOCHK *NODUMP *NOSECLVL
LINE
5716SS1 R01 M00 880000 IBM SORT SOURCE LISTING &1 &2 Page &3
5716SS1 R01 M00 880000 IBM SORT MESSAGE(S) &1 &2 Page &3
Message . . . . :
MSGID: &1 SEVERITY: &2
* * * * * E N D O F M E S S A G E S * * * * *
*...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8....+....9....+*
* * * * * E N D O F S O U R C E * * * * *
Program date . . . . . . . . . . . . . . : &1
* * * * * S O U R C E L I S T I N G * * * * *
* * * * * E N D O F L I S T I N G * * * * *
Format Data
Input file
File
Member
Library
Output file
Source file
Source member
Print file
Options:
Program date:
Socket error detected by directory server.
LDAP version not supported.
Directory server configuration error.
Thread not available for server.
Memory not available for directory server.
Socket initialization error detected by directory server.
IBM Tivoli Directory Server instance &4 started successfully.
IBM Tivoli Directory Server instance &4 ended successfully.
IBM Tivoli Directory Server
Bind to replica server &1 was successful.
IBM Directory Server publishing
IBM Directory Server client
Server could not read client request.
Directory server could not start.
Secure socket error occurred for directory server.
Key database file error for directory server.
Key ring file error.
SSL cipher specification is not correct.
No secure socket ciphers configured for directory server.
Secure socket closed for directory server.
Socket error occured for replication.
Too many requests for a secure connection.
Could not delete file system socket.
Replication connection to server failed.
Configuration file error for directory server.
Bind error with directory server.
Schema attribute error detected.
Error starting or ending server instance &1.
Directory server instance &1 already started or ended.
Passwords must be encoded when QRETSVRSEC system value is '0'.
Directory server instance &1 resource is in use.
Directory server instance &1 configuration is in use.
Error in migrating configuration space to configuration file.
Maximum event notification registrations exceeded.
Client and server error messages will be logged.
Only server error messages will be logged.
Directory server start or end failed.
Directory server instance &1 does not exist.
Could not configure directory server instance QUSRDIR.
Maximum notifications per connection exceeded.
Extended operation request not supported.
Event notification registration was successful.
End of event notification successful.
Transaction error for directory server.
Event notification contains data that is not valid.
Kerberos error for directory server.
Error migrating schema file.
No object class was specified.
Maximum number of operations per transaction exceeded.
Maximum number of transactions exceeded.
Transaction time limit exceeded.
Secure socket client authentication error occurred.
Server running in configuration-only mode.
Master DN and administrator DN are the same.
Replication agreement's consumer URL is a duplicate.
Configuration file contains a value that is not in a valid format.
Server started in configuration only mode as requested.
Directory server waiting for interface to become available.
Incorrect port configuration.
Problem reading configuration entry.
Could not find required configuration entry.
Unexpected attribute in configuration.
Heavy workload occurring. &1 requests pending.
Server response to heavy workload complete.
Connection from &1 connected as &2 closed by server.
Server closed &1 idle client connections.
Started &1 threads to service established client connections.
Anonymous connections being closed.
All connections for specific IP address and user closing due to administrator request.
Server unable to respond to large number of requests.
Connection from &1 connected as &2 closed by server.
Connection from &1 connected as &2 closed by server.
Client connection ended due to errors. Remote IP address &2 port &1
One level search of DN '' is not allowed.
Values for attribute &1 not unique.
DIGEST-MD5 message format not correct.
DIGEST-MD5 user name &1 not found.
DIGEST-MD5 user name &1 not unique.
DIGEST-MD5 bind failed.
Bind error with directory server.
User &1 cannot use authorization identifier.
Password not available for administrative user &1.
Password not available for user &1.
*ALLOBJ or *AUDIT special authority required.
Log file deleted after reaching maximum size: &1.
Error &1 occurred while attempting to delete log file: &2.
Log file successfully archived after reaching maximum size: &1.
Error &1 occurred while attempting to archive log file: &2.
Error &1 occurred while attempting to read archive directory: &2.
Old archived log file successfully deleted: &1.
Error &1 occurred while attempting to delete old archived log file: &2.
&1
A new persistent search request could not be handled by the server.
The DIGEST-MD5 SASL Bind mechanism is enabled in the configuration file.
Encrypted attributes are not allowed in distinguished names.
Encrypted attribute '&1' is allowed only in 'present' and 'equality' filters.
1-way encrypted attribute '&1' is only allowed in 'present' filters.
No Administrative Password Policy settings in server configuration.
Referral '&1' not valid.
Pass-through bind failed on &1 for entry &2.
Pass-through bind failed because the attribute has multiple values in entry.
Pass-through authentication failed due to a timeout.
The pass-through search to get mapped DN for bind DN, returned more than one entry.
Nested subtrees found in pass-through authentication configuration.
Attribute mapping is configured for attribute which is not present in the schema.
Attribute mapping is configured for attribute which is not present.
Attribute name &1 that is not valid specified in attribute mapping.
Specified attribute mapping &1 is not valid.
Pass-through attribute mapping is configured for bind DN but the entry is missing.
Value for attribute &1 not valid in entry &2.
The pass-through subtree shown conflicts with the restricted list of subtrees.
An error occurred while verifying the pass-through directory schema for existence of the attribute.
Terminated directory server instance &1 normally.
Directory server instance unable to shut down; exiting now.
A plug-in specified in the server configuration could not be processed.
The Pass-through URL &1 is not valid.
Pass-through authentication is &1.
The PTA bind failed during attribute mapping with return code &1.
Failed to connect to pass-through directory.
The library for database and the library for change log are not in the same IASP.
The server is unable to run because of an initialization error.
Server unable to start because the server could not write to the slapd.pid file.
IBM Tivoli Directory Server (&3/&2/&1) failed.
Directory server instance &1 already exists.
Administrator DN or password not correct.
&1 name is not a valid instance name.
Attribute name not valid.
Administrator DN not valid.
Administrator Password not valid.
Certificate DN not valid.
Key ring file name not valid.
Update DN not valid.
Suffix not valid.
Referral server name not valid.
Index rule already defined for attribute.
Index rule not found for attribute.
Value &1 was specified at offset &2 in input format &3 and is not valid.
Field &1 required when server is using SSL
Error opening or creating file.
Directory server instance &1 not found.
A value was specified in list entry &1 that is not valid. Reason code &2.
Not enough authority or incorrect distinguished name and password specified.
Both the administrator distinguished name and the administrator password are required.
Update DN and Update password are not allowed.
Update DN, update password and master server URL required.
The caller of the API must have &1 and &2 special authority to configure the server.
Errors occurred processing input entry list.
&1 password is not valid.
The caller of the API must have *AUDIT special authority to set the server auditing information.
Offset &1 specified in input data is not valid.
Length &1 specified in input data is not valid.
Database path not valid.
&1 is not a valid key ring file.
&1 items added to directory, &2 items not added.
Client request rejected. Directory server is read only.
Distinguished name cannot be modified while the server is active.
Validation list &1 in library &2 not created.
Validation list &1 in library &2 not found.
Server configuration cannot be modified while the server is active.
Cannot find object &1.
The specified attribute, &1, is not defined in the schema files for the server.
Publishing agent &1 was not found.
Publishing agent &1 is already configured.
Directory indexing rules (format &1) no longer supported by this interface.
Cannot set the password for a projected user.
Configuration cannot contain overlapping suffixes.
Cannot set database library to &1.
Export subtree is not a replication context.
IP address &1 is not valid.
Database library &1 must be in system ASP or basic user ASP.
Directory server not started.
Bind distinguished name or password not valid.
Parent object does not exist.
Not authorized to directory object.
Entry &1 already exists.
Schema violation for entry &1.
&1 entries added successfully. &2 entries not added.
Error with &1 value in validation list entry.
Error &1 returned by API &3.
LDAP error code &1 returned by API &2.
Errors occurred adding entries.
Error with &1 value in validation list entry.
Change Log path not valid.
Database library &1 already exists.
Configuration library &1CF already exists.
Port number &1 is not valid.
Error translating administrator password.
Database ASP number is not valid.
Change log database ASP number is not valid.
Internal error creating server instance &1.
Port number &1 is not valid.
Server instance directory already exists.
Error copying file for instance &1.
Cannot create library QUSRDIRCF.
Unable to read file.
Unable to modify V3.modifiedschema file.
Unable to copy file.
Unable to create file.
Migration detected schema conflicts.
Unable to delete file.
Unable to read file.
Unable to write file.
Unable to read in configuration file.
Unable to migrate the schema files from version &1 to version &2.
Successfully migrated the schema files from version &1 to version &2.
Unable to migrate the configuration file from version &1 to version &2.
Successfully migrated the configuration file from version &1 to version &2.
Directory server instance &1 not found.
Successfully migrated the directory server instance.
Import or export of LDIF file failed with message &4 from job &3/&2/&1.
&1 entries added successfully, &2 entries not added.
Length &1 specified in input data is not valid.
Server migration to an instance failed.
Server migration to latest version failed.
Reset of the schema files failed.
The caller of the API must have *SECADM special authority.
Server instance &1 cannot be deleted while the server is in use.
Import cannot be done while directory server is currently running.
Version indicator in LDIF file is not valid.
AES information in LDIF file is not valid.
The backup directory can not be specified for this migration scenario.
The schema and configuration files will be automatically backed up to the location '&1'.
Not all of the schema files included in the configuration file have been found.
The file, &1, could not be found in the given backup directory, &2.
All necessary files for directory server instance, &1, cannot be found in directory, &2.
Unsupported migration path.
Unable to read schema files from directory, &1.
Unable to write schema files to directory, &1.
Error encountered when accessing the LDAP Directory Server. LDAP error number &1.
Input option *CHG currently unavailable.
The caller of this API must have &1 and &2 special authorities.
Unable to export the System Distribution Directory entry &1 &2 to the LDAP Directory Server.
Synchronization between the System Distribution Directory and the LDAP Directory Server completed.
Change to &1 &2 not queued for exporting to the LDAP Directory Server.
Internal objects for exporting to the LDAP Directory Server missing.
Required System Distribution Directory fields for &1 &2 may contain characters that are not valid.
Value not valid for input parameter &1.
Error occurred with QGLDSSDD API. Reason code &1.
Input parameter &1 is not valid. Reason code &2.
Error encountered when setting up a secure connection to an LDAP server. The error number is &1.
AES passphrase is not valid.
AES salt is not valid.
AES passphrase and salt do not match the server configuration.
AES encryption consistency checking has not occurred.
AES information has not been configured.
Error occurred reading AES encrypted attribute. Entry: &2.
Password value could not be decrypted.
Entry already exists.
Attribute already exists.
Entry does not have a parent entry.
Attribute not found in schema.
Object not found.
Entry violates the schema configuration.

Length: 91064 Date: 20200921 Time: 122105

Count: 460     sap01-206 ( 1568 ms ) This documentation is copyright by IBM.