OS/400 Messages

Are you looking for the description of OS/400 (System i) messages e.g. CPF9801? Then you have come to the right place. Below you can see a (hoefully) complete list of of all OS/400 messages with all “second level texts”.

Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43


Complete OS/400 Messages Documentation From GLD0408 up to IWS2526

Complete OS/400 Messages Documentation From GLD0408 up to IWS2526

This documentation is copyright by IBM.
Count: 1184 Skipped: 0
OS/400 Messages
Description
Attribute &4 exceeds maximum length.
Entry does not contain specified attribute.
SQL error &4 occurred.
SQL error &4 occurred.
Error occurred reading configuration information. Reason code &4.
Library &4 does not exist.
Object &4 not created.
Error occurred with library.
Validation list entry error occurred.
Access Control List (ACL) error occurred with reason code &1.
Initialization error occurred.
Entry does not contain specified attribute value.
Object owner changed for directory server database objects.
Object owner not changed for object &4.
Password cannot be stored in clear text.
Password cannot be retrieved in clear text.
Suffix does not exist.
Distinguished name may have partial access.
A thread error occurred with reason code &4.
Program QGLDRCVT failed.
Parameter used to call QGLDRCVT not valid.
Existing table does not match type specified on call.
Attribute table does not exist for &1.
An internal error occurred in QGLDRCVT.
Data could not be converted for attribute &1.
Existing data found for attribute &5.
Value &3 could not be converted for attribute &1.
Entry too large to add or modify.
Error adding or modifying entry.
A severe error occurred with reason code &4.
No value exists for required attribute &1.
Obsolete attribute &1 detected.
Operation cannot be performed.
Data not imported or exported.
Simple bind using a projected or published user required.
Entry cannot be modified.
Projected user not added to directory administrative group.
Bind using group profile not allowed.
Search operation could not be performed.
Directory server performing data conversion.
Data conversion complete.
&5 entries processed.
Length specified exceeds the maximum schema length.
Schema length does not match.
Data not imported.
&5 entries added successfully. &6 entries attempted.
Not enough memory for attribute caching.
The server cannot load attribute caching.
Attribute &1 not supported for attribute caching.
Not all attributes configured for attribute caching loaded.
Attribute cache for attribute &1 deleted.
Attribute cache for attribute &1 deleted.
Failed to redefine attribute &1 as non-unique.
Attribute &1 not defined as unique.
The server cannot support language tags for attribute &1.
Attribute &1 not defined in schema.
Attribute &1 cannot be defined as unique.
Length of attribute &2 cannot be reduced.
Resize of attribute &1 failed due to database errors.
Data type for attribute &1 does not support resizing.
Attribute &1 cannot be changed from multi-valued to single-valued.
Binary attribute &1 cannot have an index.
Attribute &1 cannot use existing database table &2.
Attribute &1 cannot be deleted. Attribute is in use.
Objectclass &1 cannot be deleted. Objectclass is in use.
Change to objectclass &1 not allowed. Objectclass is in use.
Attribute &1 is not indexed but is used in searches &2 times.
Password policy start time is greater than the server's current time.
Password policy start time was changed.
The DN of the password policy entry '&1' referenced by entry '&2' cannot be found.
The password policy entry '&1' is in use and cannot be renamed or deleted.
Specific modifications are allowed only for the global password policy entry.
No evaluation of effective password policy can be performed.
Encryption setting for encrypted attribute '&1' cannot be changed.
Starting conversion of encrypted attribute '&1'. Conversion can take a long time.
Data conversion for encrypted attribute '&1' completed successfully.
Data conversion for encrypted attribute '&1' failed.
Encrypted attribute '&1' cannot be made unique.
Unique attribute '&1' cannot be encrypted.
Attribute ibm-pwdPolicyStartTime in entry '&1' cannot be set to a future time.
Password policy '&1' has been activated. Attribute ibm-pwdPolicyStartTime has been set to '&2'.
The suffix entry '&1' has been created.
The server does not support automatic creation of a suffix entry using this RDN '&1'.
The creation of a suffix entry '&1' failed.
Error &1 occurred while dequeueing a directory publishing request.
Error &1 returned by API &2.
Error &1 occurred while enqueueing a directory publishing request.
Unexpected publishing request format &1.
Publishing agent &1 is not configured.
Cannot contact directory server &1.
Directory object &1 successfully published.
Recoverable error while publishing directory object &1.
Unrecoverable error while publishing directory object &1.
Unexpected error occurred.
IBM Tivoli Directory Server Administrator
Bind user profiles as an LDAP administrator
Replication credentials not found.
Replication credentials entry not valid.
Replication credentials entry in use.
Parent entry must be a replication context.
Parent entry must be a replication group.
Parent entry must be a replica subentry.
Initial server startup has not been done.
Version number and server type not valid.
Replication schedule not found.
Could not start replication thread.
Replication starting.
Replication ending.
Formatting error in replication schedule entry.
Using immediate replication for replication agreement &4.
Error retrieving pending changes for replica.
Error retrieving replication data.
Error updating replication status.
Error parsing data for replication.
LDAP connection to replica server was lost.
Established connection for replication.
Established secure connection for replication.
Replicating all pending changes.
Replication error occurred. &2.
Authentication to replica server failed.
Authentication to replica server failed.
Authentication to replica server failed.
Replica server does not have the expected server ID.
Internal processing error.
Replication migration started.
Update of replication context failed.
Replication starting in retry mode for replica &1.
Replication starting in nonblocking mode for replica &1.
Replication error. Change will be skipped.
Error in replica URL for replication agreement.
Using serial replication for replication agreement &1.
Using concurrent replication for replication agreement &1.
Unknown replication method specified for replication agreement &1.
Replication using system limit of &2 connections for replication agreement &1.
Replication using the default of &2 connections for replication agreement &1.
Replication using &2 connections for replication agreement &1.
Error occurred initializing thread &1 for replication agreement &2.
Using serial replication instead of configured method for replication agreement &1.
Entry &1 has been removed from the replication error log.
Replication error log has been cleared for replication agreement &1.
Error occurred logging replication error. See details for more information.
Replication error log size limit exceeded. Replication pausing for &2.
Approaching the replication error log size limit for replication agreement &2.
Replication error log is full. Replication still paused for &1.
Replication continuing for replica &1 after logging error for entry &3. See details for more information.
Retrying failed change &2 for replication agreement &1.
Not able to get password from credentials &1.
Replicated 'modify' request rejected because local data is newer. Entry: &1.
Replication conflict was detected for a 'modify' request to entry &1.
Replication conflict: Server has sent a refresh request for entry &1.
Replication conflict: Received refresh request for entry &1.
Replication conflict: Sending refresh of entry &1.
Replication conflict: Refresh complete for entry &1.
Replication conflict: Refresh failed for entry &1.
Replication conflict: Entry exceeds the replication conflict maximum entry size. Entry: &1.
Error occurred creating or writing to replication 'lost and found' log file.
Directory entry has been replaced to fix a replication conflict. Entry: &1.
'Add' request rejected because existing entry is newer. Entry: &1
The replication filter entry '&2' defined for the replication agreement '&3' cannot be found.
The filter entry '&1' is in use and cannot be deleted.
The attribute '&1' specified in the replication filter is not found in the schema.
The objectclass '&1' specified in the replication filter is not found in the schema.
Invalid replication filter '&1' specified in entry '&2'.
Creation of surrogate entry '&1' on partial replica '&2' port &3 failed.
Modifications to only the ACL attributes of an entry will not be filtered.
The operation is being performed against a server that does not support filtered replication.
Replication conflict resolution mode is set to &1.
Restricted Access to the replication topology is set to &1.
Replication error logging for replication agreement DN '&1' is unlimited.
Internal search for the parent entry '&1' failed.
Creating surrogate entry '&1' on partial replica '&2' port &3.
Creation of surrogate entry '&1' on partial replica '&2' port &3 succeeded.
Change cannot be replicated because consumer does not support encrypted attributes.
Consumer server on host '&1', port &2, does not support the requested password encryption format.
Consumer server on host '&1', port &2, does not support the requested attribute encryption format.
Change cannot be replicated because it contains attributes that require a secure connection.
Cannot replicate to consumer because it does not support encrypted attributes.
Cannot replicate to consumer because it does not support the current password encryption setting.
The operational attribute '&1' is not allowed in replication filter.
Encryption settings for attribute '&1' have been changed to: '&2'.
Matching Rule for attribute is not compatible with its syntax
Matching Rule is not consistent with others in terms of case-sensitivity handling.
Data source: '&1': line &2: expected ENCRYPT specification, but could not find it.
Data source: '&1': line &2: expected RETURN-VALUE specification, but could not find it.
Attribute '&1' cannot be encrypted. The server does not support encryption for syntax &2.
Password attribute '&1' cannot be encrypted in the schema.
Schema item of type &1 and name '&2' already exists with the specified OID: '&3'.
DBNAME '&1' is not valid for attribute '&2'.
db2ldif is unable to run because of an initialization error.
ldif2db unable to run because of initialization error.
IBM Tivoli Directory Server Web Administration Tool has already been installed.
IBM Tivoli Directory Server Web Administration Tool was reset successfully.
Install of IBM Tivoli Directory Server Web Administration Tool failed.
Install of IBM Tivoli Directory Server Web Administration Tool failed.
Install of IBM Tivoli Directory Server Web Administration Tool completed successfully.
Change Directory Server Attr
Instance
Distinguished name
Password
Copy To LDIF
LDIF stream file
Administrator
Subtree distinguished name
Copy cn=localhost
Copy cn=pwdpolicy
Copy nested replication
Copy operational attributes
Passphrase
Encryption salt
Copy From LDIF
Replicate imported data
¤ Æ Å Ø ¬ \
Attributes
Filter distinguished name
Filter comments
Directory server attributes successfully changed.
Unexpected error occurred.
Translation to unicode failed.
Directory server contents successfully copied to file.
File contents successfully copied to directory server.
Distinguished name not found in server configuration.
The directory server instance repository, &1, cannot be read.
The directory server instance repository, &1, cannot be written to.
Unable to run the command on directory server instance &1, while it is running.
Unable to run the command on directory server instance &1.
The directory server instance &1 does not exist.
The ibmslapd.conf file for the directory server instance &1 could not be found.
The configuration file &2, does not exist, was not accessible, or could not be written to.
The request was successful
Operations error
Protocol error
Time limit exceeded
Size limit exceeded
Compared type and value does not exist in entry
Compared type and value exists in entry
Authentication method not supported
Strong authentication required
Partial results and referral received
Referral returned
Administrative limit exceeded
Critical extension not supported
Confidentiality is required
SASL bind in progress
No such attribute
Undefined attribute type
Inappropriate matching
Constraint violation
Type or value exists
Invalid syntax
No such object
Alias problem
Invalid DN syntax
Object is a leaf
Alias dereferencing problem
Inappropriate authentication
Invalid credentials
Insufficient access
Directory server is busy
Directory service agent is unavailable
Directory server is unwilling to perform requested operation
Loop detected
Naming violation
Object class violation
Operation not allowed on nonleaf
Operation not allowed on relative distinguished name
Already exists
Cannot modify object class
Results too large
Affects multiple servers.
Unknown error
Cannot contact LDAP server
Local error
Encoding error
Decoding error
Request timed out
Unknown authentication method
Bad search filter
User cancelled operation
Bad parameter to an LDAP routine
Out of memory
Connection error
Feature not supported
Control not found
No results returned
More results to return
Not an LDAP URL
URL has no DN
URL scope value is not valid
Memory allocation error
Client loop
Referral limit exceeded
SSL environment already initialized
Initialization call failed
SSL environment not initialized
Illegal SSL parameter value specified
Failed to negotiate a secure connection
SSL library cannot be located
No explicit owner found
Could not obtain lock on required resource
No LDAP servers found in DNS
Truncated DNS results
Could not parse DNS data
Cannot resolve system domain or name server
DNS Configuration file error
Output buffer overflow
Input buffer truncated
Unusable input character
Character does not map to a code set point
Invalid handle specified.
&2 is not valid for length of receiver variable.
&1 is not valid for double-byte character set capable device.
&1 is not valid for starting page number.
&1 is not valid for number of pages to convert.
&1 is not valid for starting record number.
&1 is not valid for spooled file function.
&1 is not valid for number of statuses.
Number of job queue names is not valid.
&1 is not valid for number of user names.
&1 is not valid for number of output queue names.
&1 is not valid for number of activities.
&1 is not a valid activity.
Errors occurred in &1.
User-specified data parameter must not be blank.
&1 is not valid for user or queue indicator.
Number of job queue statuses is not valid.
Number of statuses on job queue is not valid.
Number of active statuses is not valid.
&1 is not valid for number of statuses on output queue.
Key 220 for device class is not specified.
Form type must not be blank.
&1 is not valid for number of keys to sort on.
&1 is not valid for sort key field starting position.
&1 is not valid for sort key field length.
&1 is not valid for number of records to return.
Incomplete information received from program &1.
&1 is not valid for number of data areas.
Internal user space is damaged.
&1 is not valid for caller indicator parameter.
'&1' for mode is not valid.
Key 203 for user name is not specified.
Keys 206 and 207 for output queue name and library are not specified.
Key 214 for form type is not specified.
Key 209 for user-specified data is not specified.
Key 210 for status is not specified.
Key 208 for device is not specified.
&1 is not valid for number of devices.
User name cannot be blank.
Keys 202, 203, and 204 for qualified job name are not specified.
&1 is not valid for status.
&1 is not valid for sort indicator parameter.
&1 is not valid for length of message selection information.
&1 is not valid for number of selection criteria.
*ALL cannot be specified with another value in message selection criteria.
Key 1004 for job queue name is not specified.
&1 is not valid for job queue status.
Key 1903 for status of jobs on job queues is not specified.
Key 1001 for reply status field is not specified.
Message queue associated with user name &1 does not exist.
Message queue name and library must be specified.
&1 is not valid for status of job on job queue.
Key 0101 for active status is not specified.
&1 is not valid for active status.
&1 is not valid for status on output queue.
*ALL cannot be specified with another value.
&1 is not valid for format name.
&1 is not valid for open spooled file handle.
Too many spooled files are open.
&1 is not valid for length of data to be changed.
*CURRENT must be the last user profile name specified in the filter information parameter.
This message is used internally by the system.
One or more message queues could not be allocated.
The total of message queue names and user profile names must be 1 through &1.
None of the message queues requested were allocated.
&1 is not valid for type of data sent.
&3/&2/&1 job is not active.
&3/&2/&1 job is not waiting on an inquiry message.
Unable to allocate message queue &1 in library &2 for user &3.
Could not allocate device message queue &1 in library &2.
The value specified, &2, for the size of the message queue output parameter is not valid.
Number of keys must be at least &2.
&1 is not valid for message type.
Job &3/&2/&1 was not found.
Message queue is not found for job &3/&2/&1.
&3/&2/&1 job is not active for device &4.
&3/&2/&1 job for device &4 is not waiting on an inquiry message.
Job &3/&2/&1 for device &4 was not found.
Message queue was not found for device &1.
This message is used internally by the system.
Message monitoring is already active.
Message monitoring is not active.
Not authorized to library &1.
Sort key field &1 starting at position &2 plus field length &3 is greater than record length &4.
Function &1 given for event monitor is not valid.
Sum of sort fields is greater than 2000.
No records to sort.
*ALL cannot be specified with another value.
*ALL cannot be specified with another value.
The value, &1, specified for the length of message text is not valid.
The value, &1, specified for the length of help message text is not valid.
The value, &2, specified for the number of fields to be returned by the message monitor is not valid.
The value, &2, was specified for the number of message queues is not valid.
The value, &2, was specified for the number of user profile names is not valid.
The value specified for the size of the user profile message queue output parameter is not valid.
*ALL cannot be specified with another value.
*ALL cannot be specified with another value.
Keys 206 and 207 for output queue name and library were not specified.
&1 is not valid for number of fields to return.
Graphical Operations mode entry
&1 does not have customization data.
Customization data for &1 successfully set.
Some user profiles did not have customization data copied successfully.
&1 already has customization data.
Key 1004 for job queue name is not specified.
Customization data for &1 successfully deleted.
Some user profiles did not have customization data deleted successfully.
&1 is not valid for offset.
Subset key &1 is not valid.
Amount of customization data is too large to retrieve.
Amount of customization data is too large to store.
&1 is not valid for number of user profile names.
'&1' is not valid for replace value.
List information is not valid. Reason code &1.
Offset of field, &1, is not valid.
Length of field, &2, is not valid. Reason code &1.
Record number, &1, is not valid.
Format name, &1, is not valid.
List does not contain required fields.
Number of fields, &2, is not valid. Reason code &1.
Filter information is not valid. Reason code &1.
Error &1 occurred while sorting a list.
&1 is not valid for signed-on user.
Invalid job queue name *NONE.
Number of messages to verify, &1, is not valid.
Number of auxiliary server jobs ,&1, is not valid.
The list cannot be completed. No auxiliary server jobs are running or can be started.
The list has been marked in error. See the previous messages.
Error in auxiliary server job.
&1 is not valid for subset key.
Starting record cannot be 0 when records have been requested.
Reserved field in sort information not valid.
Order field in sort information not valid.
Printer name cannot be specified when format OSPL0100 is requested.
Number of primary job statuses not valid.
Active status key must be specified.
Primary status array must include *ACTIVE.
Status of job on job queue key must be specified.
Primary status array must include *JOBQ.
Number of job queue names not valid.
Job queue name key must be specified.
Number of active job statuses not valid.
Number of job on job queue statuses not valid.
&2 is not valid for length of job selection criteria.
&2 is not valid for length of receiver variable definition information.
Format OLJB0200 must be specified.
&2 not valid for length of job selection information.
Filter key information is not valid.
Filter information is not valid.
Current user key must be specified.
Server type key must be specified.
Number of current users not valid.
Number of server types not valid.
Filter specification is not valid.
Filter information not valid for format OLJB0300.
Number of memory pools not valid.
Number of active subsystem names not valid.
All optional parameters must be specified.
Filter information not correct for formats OLJB0100 or OLJB0200.
Required keys not specified.
Number of job type - enhanced entries not valid.
&1 is not valid for number of keys to sort on.
Filter information is not valid. Reason code &1.
Job type-enhanced key must be specified.
&1 is not valid for length of filter information.
Number of qualified job names not valid.
Filter information not valid.
Subsystem description name - qualified key must be specified.
Function &2 failed with error code &1.
Persistent CGI session handle is not unique for program &1.
Persistent CGI timeout &1 invalid for program &2. Maximum allowed used.
Persistent CGI timed out - program &1 terminated.
Can not match certificate with a user profile.
Can not match certificate with Validation List.
The HTTP server cannot start with SSL mode on if an APPNAME directive is not configured.
Unable to open or create target file &1 in library &2.
IBM HTTP Server for i
Triggered Cache Manager
Webserver Search Engine
HTTP Server Monitor
IBM HTTP Server (powered by Apache)
PHP: Hypertext Preprocessor
HTTP Server Extension
HTTP Server Extension
HTTP Server Extension
HTTP Server Extension
HTTP Server Extension
HTTP Server Extension
Parameters IDX and DOCLIST required for OPTION(*CRTIDX)
Parameters IDX and DOCLIST required for OPTION(*ADDDOC) and OPTION(*RMVDOC).
Parameter IDX required for OPTION(*MRGIDX)
Request to add or delete documents was incomplete. Reason &1.
Parameter IDX required for OPTION(*DLTIDX)
Parameters DOCLIST and STRDIR required for OPTION(*CRTDOCL) and OPTION(*UPDDOCL).
Parameter DOCLIST required for OPTION(*DLTDOCL)
Parameters CFG and MAPFILE required for OPTION(*CRTMAPF) and OPTION(*UPDMAPF).
Request to create an index failed. Reason &1.
Request to add or delete documents from an index failed. Reason &1.
Request to merge an index failed. Reason &1.
Request to delete an index failed. Reason &1.
Request to create or append to a document list failed. Reason &1.
Request to delete a document list failed. Reason &1.
Request to create or append to a mapping rules file failed. Reason &1.
*IOSYSCFG special authority required to use CHGHTTPSCH command.
Configure HTTP Search
Index name
Index directory
Index description
Document list file
Start directory
Traverse directory
Filter
Document content
Allow file errors
Enable case sensitive search
Valid characters
Index HTML fields
Prefix for URL
Mapping rules file
Delete type
Option
Request to create an index was incomplete. Reason &1.
Values specified for parameter IDXHTML are not allowed at the same time.
Request to create a thesaurus dictionary failed. Reason &1.
Request to delete a thesaurus dictionary failed. Reason &1.
Request to retrieve a definition file failed. Reason &1.
Thesaurus dictionary name
Thesaurus directory
Thesaurus definition file
Parameters THSDCT and THSDFNF required for OPTION(*CRTTHSDCT)
Validation list
Validation list entries
Remove validation list entries
URL
User ID
Password
Parameter THSDCT required for OPTION(*DLTTHSDCT)
Parameters THSDCT and THSDFNF required for OPTION(*RTVTHSDFNF)
URL object
Document storage directory
Language of documents
URL list entries
Options object
Proxy server for HTTP
Proxy port for HTTP
Maximum file size
Parameters VLDL and VLDLE required for OPTION(*CRTVLDL)
Parameter VLDL required for OPTION(*DLTVLDL)
Parameters VLDL and VLDLE required for OPTION(*ADDVLDLDTA)
Proxy server for HTTPS
Proxy port for HTTPS
Parameter PRXPORT is required when PRXSVR is specified.
Maximum storage size
Maximum threads
Maximum run time
Logging file
Clear logging file
Document list type
Hours
Minutes
URL
URL filter
Parameter PRXPORTSSL is required when PRXSVRSSL is specified.
Request to create a validation list failed. Reason &1.
Request to add or remove entries from a validation list failed. Reason &1.
Request to delete a validation list failed. Reason &1.
Parameters VLDL and RMVVLDLE required for OPTION(*RMVVLDLDTA)
Request to create or update an options object failed. Reason &1.
Maximum crawling depth
Enable robots
URL and options objects
Crawling method
Start HTTP Crawler
Resume HTTP Crawler
End HTTP Crawler
Crawling action
Parameters DOCLIST and URL required for METHOD(*DETAIL)
Parameter URLOBJ required for OPTION(*UPDURLOBJ).
Request to delete an options object failed. Reason &1.
Request to create or update a URL object failed. Reason &1.
Request to delete URL object failed. Reason &1.
Request to resume a crawling session failed. Reason &1.
Request to pause or end a crawling session failed. Reason &1.
Request to register a document list failed. Reason &1.
Parameters DOCLIST and OBJECTS required for METHOD(*OBJECTS)
Parameter DOCLIST required for OPTION(*REGDOCL)
Parameters URLOBJ, DOCDIR, LANG, and URLLST required for OPTION(*CRTURLOBJ).
Parameter URLLST required for OPTION(*UPDURLOBJ) when URLACT is *ADD.
Parameter URLOBJ required for OPTION(*DLTURLOBJ).
Parameter OPTOBJ required for OPTION(*CRTOPTOBJ) and OPTION(*UPDOPTOBJ).
Request to create a validation list was incomplete. Reason &1.
Parameter OPTOBJ required for OPTION(*DLTOPTOBJ)
Request to add or remove entries from a validation list was incomplete. Reason &1.
Request to create or update a URL object was incomplete. Reason &1.
Parameter DOCLIST required for OPTION(*PRTDOCLSTAT).
Parameter IDX required for OPTION(*PRTIDXSTAT).
Request to create or update a document list was incomplete. Reason &1.
Request to print the status of an index failed. Reason &1.
Request to print the status of a document list failed. Reason &1.
Value *SAME is not allowed for parameters with OPTION(*CRTOPTOBJ).
URL list action
Remove URL list entries
HTTP server
Parameter RMVURLLST required for OPTION(*UPDURLOBJ) when URLACT is *REMOVE.
Request to print the status of index &3 in index directory &4 was incomplete. Reason &1.
Request to print the status of document list &3 was incomplete. Reason &1.
This is a CGI job for IBM HTTP Server instance &1.
This is a multiple thread capable CGI job for IBM HTTP Server instance &1.
This is a non-thread safe file system I/O job for IBM HTTP Server instance &1.
IBM HTTP Server ending due to exceptions.
IBM HTTP Server CGI job ending, CGI program &1 returned before all of its threads were complete.
The HTTP server detected problems with clustering facilities.
Highly Available CGI invoked QzhbCgiRecvState() after it had already received the entire state.
QzhbCgiRecvState() was called when there was no state.
Error in Highly Available HTTP server: Function &1: Internal code failure at code point &2.
Received normal termination indication from HTTP server. The HTTP server monitor is ending.
HTTP server recovery retry limit reached. The HTTP server monitor is ending.
This is an exit program job for IBM HTTP Server instance &1.
HTTP server Instance start-up failed. High Availability model configuration error detected.
Highly Available CGI program returned a session handle other than was passed to it.
Highly Available CGI is not allowed to return "Cluster-Enabled: 1" header here.
This is the monitor job for IBM HTTP Server instance &1.
HTTP server Instance start-up failed. High Availability TCP/IP address configuration error detected.
Highly available HTTP server failed to start. Bindspecific directive configuration error.
No HostName directive specified.
High Availability HTTP Server has failed to delete the Cluster Resource Group (CRG). CRG name &1.
The High Availability HTTP Server has detected an error in Cluster Services.
&1.
The High Availability HTTP Server failed to start because of a configuration error.
The High Availability HTTP Server failed to start because of a configuration error.
HTTP Server CCSID Error: System does not support a &1 instance startup value of &2.
HTTP Server CCSID Error: The EBCDIC file CCSID &1 can not be converted to the ASCII network CCSID &2.
No valid ASCII Net CCSID found for HTTP Server instance &2, CCSID &1 will be used.
No valid EBCDIC File CCSID found for HTTP Server instance &2, CCSID &1 will be used.
HTTP server instance name index object not usable.
FTPDirInfo directive is not valid (Line Number &2 or Sequence Number &1)
Unknown error type for ErrorPage directive (Line Number &2 or Sequence Number &1)
ErrorPage directive is not valid (Line Number &2 or Sequence Number &1)
GcDailyGc directive is not valid (Line Number &2 or Sequence Number &1)
GcMemUsage directive is not valid (Line Number &2 or Sequence Number &1)
CacheClean directive is not valid (Line Number &2 or Sequence Number &1)
CacheUnused directive is not valid (Line Number &2 or Sequence Number &1)
CacheDefaultExpiry directive is not valid (Line Number &2 or Sequence Number &1)
CacheMinHold directive is not valid (Line Number &2 or Sequence Number &1)
CacheLockTimeout directive is not valid (Line Number &2 or Sequence Number &1)
CacheLastModifiedFactor directive is not valid (Line Number &2 or Sequence Number &1)
CacheLastModifiedFactor directive is not valid (Line Number &2 or Sequence Number &1)
CacheTimeMargin directive is not valid (Line Number &2 or Sequence Number &1)
CacheLoadThreshold directive is not valid (Line Number &2 or Sequence Number &1)
ServerType directive is not valid (Line Number &2 or Sequence Number &1)
HomeDir directive is not valid (Line Number &2 or Sequence Number &1)
AccessLogExcludeURL directive is not valid (Line Number &2 or Sequence Number &1)
AccessLogExcludeMethod directive is not valid (Line Number &2 or Sequence Number &1)
AccessLogExcludeMimeType directive is not valid (Line Number &2 or Sequence Number &1)
AccessLogExcludeReturnCode directive is not valid (Line Number &2 or Sequence Number &1)
Unknown proxy or gateway directive (Line Number &2 or Sequence Number &1)
HTTP Server CCSID Error: System does not support a &1 directive value of &2.
Unknown Icon directive (Line Number &2 or Sequence Number &1)
HTTP Server instance &1 start up failed.
HTTP Server instance &1 failed.
HTTP Server Instance &1 failed.
Directive syntax not correct. The default value is used.
Directive syntax error occurred.
Directive not recognized.
HTTP server instance &1 start up failed. Configuration file container error.
HTTP Server Instance &1 failed during start-up.
Directive is not allowed within the specified section.
An incorrect number of parameters was used on a directive.
The specified directive requires a value of On or Off.
Directive is not allowed within the specified section.
Failure occurred while attempting to unload module.
The specified HTTP Server module cannot be added with &1.
Could not locate &1 in the module &2.
Module structure &1 is not valid.
The &1 directive is not closed.
The specified path for directive &1 does not exist.
The specified value for directive &1 must be a directory.
Message catalog not opened.
Message catalog not opened.
Primary language feature not installed.
HTTP server command line parameter is not valid.
The server could not open file &2.
Table object error occurred.
HTTP server job failed during initialization. System resources not available.
The server could not open file &2.
Directive &1 takes &2 arguments.
Error occurred opening file.
Directive &1 is not configured correctly.
Port number is not valid.
Port number is not valid.
Receive buffer size is not valid.
Domain name is not valid.
Argument value is not valid or is out of range.
Argument value is not valid or is out of range.
Directive &2 is not supported.
Improper use of wildcard in argument value.
Time value is not valid.
Directive &1 is no longer supported.
Directive &1 is no longer supported.
Directive &1 is no longer supported.
HTTP Server waiting for address &2 port &1 to become available.
Directive &1 cannot be nested.
Argument is too long.
Duplicate argument list value has been ignored.
Conflicting directives found in configuration.
Conflicting directives found in configuration. The server failed to start.
Conflicting directives found in configuration. The server failed to start.
Error occurred opening file.
Error occurred converting data. Reason &1.
HTTP server &1 start up failed.
HTTP server &1 could not be ended.
HTTP server &1 could not be restarted.
HTTP Server instance &1, hot backup takeover.
HTTP Server instance &1, a thread failed.
HTTP Server instance &1 job &4/&3/&2 failed.
One of HTTP Server instance &1 jobs failed.
This is the primary job for HTTP Server instance &1.
This is the manager job for HTTP Server instance &1.
Module &1 is not valid.
Could not load requested module.
HTTP server data collection program could not access user index &2/&1.
HTTP Server data collection program could not attach to shared memory segment identifier &1.
HTTP Server pre-configuration step failed.
HTTP Server post-configuration step failed.
HTTP Server open logs step failed.
API &2 failed with error &1.
Error occurred creating symbolic link for the &2 job.
HTTP server failed during FRCA initialization.
&1.
HTTP server failed to bind to port &1.
Unable to perform operation &4 on port &1.
Unable to create socket.
Error occurred on setsockopt operation.
HTTP server failed to listen on port &1.
CCSID value is not correct.
Data cannot be converted.
Shared memory error occurred on &1 operation &2.
HTTP response code is not supported.
Local document not specified.
Value specified for directive &1 is not supported.
Multiple arguments not supported.
Program &1 in library &2 called the &4 API.
Program &1 in library &2 called function &4.
Internal error occurred while compiling regular expression.
HTTP Server not started. Shared memory is not allowed on this system.
Secure Sockets session failed to initialize successfully.
Value specified on directive &1 was not valid.
SSLClientAuthGroup directive has an incorrect number of arguments.
Cipher spec &1 specified on directive &2 not valid.
Syntax error in the SSLClientAuthRequire directive.
SSLAppName directive must be specified in order to use Secure Sockets.
URL specified for directive &2 is not valid.
URL specified for directive &2 cannot be parsed.
Unable to open the LDAP configuration properties file.
Value missing for LDAP configuration file entry.
Unknown directive found in LDAP configuration file.
Configuration information was not returned for the LDAPInclude directive.
Could not open the LDAPInclude configuration properties file.
Insufficient storage available to obtain a session with LDAP
LDAP search for configuration information returned no information.
No values found for LDAP attribute &1.
VirtualHost port overlap has been detected.
Cannot resolve host name &1.
Mixing specific ports and wildcard ports with a NameVirtualHost address is not supported &1:&2
VirtualHost &1:&3 overlap. The first one specified will be used.
Failed to resolve server name &1.
NameVirtualHost &1:&2 has no VirtualHost.
<VirtualHost> containers can not be nested. -> &1
Command missing from system call.
Error occurred on system command.
Instance &1 is not found.
PID not found for instance &1.
Error occurred opening log file &2.
Error occurred opening log file &2. Permission denied.
Error occurred opening log file &2. Object name is not correct.
Error occurred opening log file &2. File is in use.
Error occurred opening log file &2. No such path or directory.
A mismatch exists between log file &1 and the format requested.
Error writing to log file &2. No additional log entries will be saved.
Log file &1 is full, no additional logs will be saved.
LogCycle value not valid with QDLS filesystem.
Could not start logging job for HTTP Server &1.
This is a log maintenance job for HTTP Server &1.
Logging job for HTTP server &1 failed.
This is a logging job for HTTP Server &1.
HTTP Server &3 log file is full. No additional logs will be saved.
Error reading log information.
Logging job for HTTP server &1 failed.
Signal processing failed in logging job for HTTP server &2.
File &1 is busy or not available.
Syntax of &1 directive is not correct.
IP address specified for directive &1 is not valid.
Value for directive &1 must be between &2 and &3.
Note type &1 for directive &2 is not known.
Syntax for remote proxy specification is not correct.
Via: header control value is not valid.
Values exceed proxy cache directory limits.
Directory path is not valid for proxy cache.
Garbage collection for proxy cache ended prematurely.
Errors occurred during garbage collection for proxy cache.
Proxy cache maintenance is not enabled.
Directive &1 requires a path when specified outside a container context.
Directive &1 cannot contain a path when specified in a container context.
Directive BalancerMember has a syntax error.
Value for CGIConvMode directive is not valid.
First value for &1 directive must be numeric and greater than 0.
Value for &1 directive must be numeric and greater than 0.
Default value &3 will be used for directive &1.
Cumulative number provided on &1 directive(s) greater than maximum allowed.
Error while starting CGI job. Could not swap to user profile &1.
Error while starting CGI prestart jobs.
Required licensed program &1 option &2 is not installed.
URL specified on &1 directive was not found or is not valid.
TRACE method not allowed on the Script directive.
Error while running initial URL for a CGI job. Swap to user profile &1 failed.
Error while processing directive.
User profile for directive &1 is not valid.
Option &2 for &1 directive is not correct.
RewriteRule directive is not valid.
Value for CookieExpires directive is not valid
The &1 directive does not contain a closing parenthesis.
The &1 directive contains the "None" keyword combined with a prefix.
The &1 directive contains the '-' prefix combined with &2.
Option &2 with no value may only appear as "-&2".
Value for &2 option is less than the minimum allowed.
Directory indexing option &2 is not valid.
IndexOptions keywords not allowed when option "None" is specified.
Keyword &2 for directive &1 is not valid.
UserDir directive with enable keyword requires a list of user names.
The Dav provider &1 is not known to the HTTP Server.
Value for CookieDomain directive is not valid.
Missing regular expression for directive &1.
The regular expression could not be compiled for directive &1.
Directive &1 requires an environment variable expression.
The directive &1 requires a header field name.
The required URL to redirect to is missing.
The Redirect or RedirectMatch directive has a destination URL that is not an URL.
Redirect URL not valid for the specified status.
First argument for directive &1 is not correct.
The directive Header unset usage error.
Errors occurred on the &1 directive.
RewriteBase directive usage error.
Value for RewriteRule directive is not valid.
Error on RewriteLog.
Values on directive &1 are not compatible.
A classpath must be defined for a worker with the value "jni" for the keyword "type".
An attempt to create a Java Virtual Machine failed.
An attempt to initialize a Java Virtual Machine failed.
Could not obtain required system resources.
Could not attach a thread to the Java Virtual Machine.
Could not detach a thread from the Java Virtual Machine.
An error was detected while accessing the Java Virtual Machine.
A servlet called the System.exit() method.
The Java Virtual Machine has been ended unexpectedly.
There is no configuration for ASF Tomcat server &1.
Job &2 was started to service ASF Tomcat server &1.
ASF Tomcat server &1 did not start because of error &2 in the server configuration.
Java Virtual Machine failed to start for ASF Tomcat server &1. Reason &2.
Java Virtual Machine for ASF Tomcat server &1 has ended unexpectedly.
An error was detected while accessing the Java Virtual Machine for ASF Tomcat server &1.
ASF Tomcat server &1 is already active.
ASF Tomcat server &1 is not active.
An error occurred when attempting to open file QATMHASFT in library QUSRSYS. Errno &1.
ASF Tomcat server &1 did not start because of an authority error. Reason &2.
ASF Tomcat server &1 did not end because of an authority error. Reason &2.
ASF Tomcat server &1 is being ended.
An error occurred for ASF Tomcat server &1.
A conversion error occurred while attempting to process an ASF Tomcat server request.
Not enough system resources available to process ASF Tomcat server request.
A java servlet called the System.exit() method.
Internal error. Could not initialize QZSRVIHSAH plug-in.
&1.
Input parameter &1 is not valid.
Server instance &1 not found or is unreadable.
Unable to update server instance &1.
A value in the instance data structure at decimal offset &1 is not valid.
Server configuration &1 not found or is unreadable.
Unable to update server configuration &1.
Input configuration handle in parameter &1 is not valid.
Input directive handle in parameter &1 is not valid.
Input directive handle in parameter &1 is not a main directive.
Input directive handle in parameter &1 is not a subdirective.
No matching directive found.
The combination of insertion position and relative directive is not valid.
Unable to lock server configuration &1.
Unable to update server configuration &1.
Object handle in parameter &1 not valid.
Object handle in parameter &1 not a scope.
No matching object found.
Combination of insertion position and relative object not valid.
Value &1 not valid for keyword &2.
Keyword &1 not valid for object type.
Server instance &1 is not an Apache type instance.
Group file not found or is unreadable.
Unable to update group file.
Input group list handle in parameter &1 is not valid.
Input group handle in parameter &1 is not valid.
Input user handle in parameter &1 is not valid.
Group not found in group list.
User not found in group.
Group file already exists.
Unable to lock group file.
IBM i Access for Windows
Installation
Migration
Update
Communications
TCP/IP (Winsock version 1.1)
ODBC
Data Transfer
Service
AFP Viewer
Security/Password management
Connection configuration
Incoming Remote Command
Application Program Interface (API)
Data queues
Optimized SQL
National Language Support
Object Print
Data Translation
License Management
IPX
Remote Command
Data Base
Distributed Program Call
OLE Objects
Custom Controls
Terminal Emulation
Print Emulation
Other
Policy Support
Operations Console
File Systems
Jobs
Messages
Output
Printers
Authorization Lists
OLE DB Provider
SSL
.NET Data Provider
Operations Navigator
Database
Network
Hardware Inventory
Software Inventory
Backup
Users and Groups
Audit Policies
Security Policies
Data Transfer
Mail Client
MultiMedia Catalog
IBM i Access Family
IBM i Access Enablement Support
Trusted CA certificate operation not allowed.
Application &1 not using certificate.
Certificate not valid.
Digital Certificate Manager
437-037
897 -290 JPN,891 -833 KOR,903 -836 CHS,904 -037 CHT,897 -1027JPN,1088-833 KSC,1114-037 BG5,1115-836 SCG,1041-290 JPN,1041-1027JPN;
To document
From virtual disk
Format of PC data
DBCS code page
Insert DBCS SO/SI
To folder
Library
Copy From PC Document
Copy To PC Document
Convert To Folder
Replace document
Replace documents
From folder
From document
Name, *FROMMBR
From member
To member
From file
To file
Replace or add records
Translate table
Name
Record format
Initialize IBM i Access
Keyboard type
ASCII code page number
EBCDIC code page number
IBM i Access mode entry
Language feature code
IBM i Access Administrators
TRNTBL(*NONE) required with TRNIGC(*BG5), TRNIGC(*KSC) or TRNIGC(*SCGS)
TRNTBL(*NONE) and IGCSOSI(*YES) required with TRNIGC(*BG5), TRNIGC(*KSC) or TRNIGC(*SCGS)
File member copied to PC document &1.
PC document copied to physical file member.
PC document copied to file with &6 truncated records.
Virtual disk successfully converted.
PC document &1 not copied.
Member &1 not copied to PC document.
Virtual disk converted. Errors occurred.
Unable to convert virtual disk to folder.
Member not copied to PC document. See previous message.
Converting virtual disk to folder.
Translate table &1 in library &2 not found.
Translate table &1 in library &2 not accessible.
Not authorized to translate table &1 in library &2.
Error in data to be translated.
Virtual disk &1 in library &2 not found.
File &1 in library &2 is not a virtual disk.
Not authorized to virtual disk &1 in library &2.
Virtual disk &1 in library &2 not accessible.
Virtual disk &1 in library &2 could not be opened.
PC file &1 is empty.
Error reading virtual disk &1 in library &2.
Error writing virtual disk &1 in library &2.
Unexpected internal error.
File &1 in library &2 is a DDM file.
Virtual disk &1 in library &2 is empty.
Cannot set virtual disk directory path. Path not converted.
Member &1 created in file &2 in library &3.
File &1 in library &2 is not a database file.
Override of member to *ALL not correct.
Member &1 of file &2 in library &3 is full.
File &1 in library &2 not found.
Member &1 of file &2 in library &3 not found.
Not authorized to file &1 in library &2.
File &1 in library &2 not accessible.
File &1 in library &2 could not be opened.
File &1 in library &2 is not a physical file.
&1 is an incorrect member name.
Error reading from database member &1.
Error writing to database member &1.
Error deleting file &1 in library &2.
Error renaming file &1 in library &2.
Unable to process table &1 in library &2.
No folders found for INZPCS to process for language &1.
Environment may not be correct.
Error occurred when initializing keyboard information.
No product found to initialize
Error creating folder.
Error opening folder.
Error closing folder.
Folder name is too long. Path not converted.
Error opening folder. Path not converted.
Error creating folder. Path not converted.
Folder name is not correct.
Error creating folder with new name. Path not converted.
Error opening folder with new name. Path not converted.
Using new folder name instead of incorrect folder name.
Unable to use folder resources.
Error updating folder description.
Document already exists with name &1.
PC file name &4 is an incorrect document name.
Document name &1 is not correct.
PC document &1 is empty.
PC document &1 already exists and REPLACE value is *NO.
Document &3 already exists and REPLACE value is *NO.
Error creating document &1.
Error creating document &1. PC file not converted.
Error opening document &1.
Error replacing document &1.
Error reading document &1.
Error writing to document &1.
Error closing document &1.
Error creating document with new name. PC file not converted.
Using new document name &4 instead of &3.
Document not in IBM PC file format.
Error replacing document &1. PC file not converted.
Folder already exists with name &1.
Document not in standard text format.
Initialize IBM i Access (INZPCS command) failed.
Error getting message &1 from message file &2 in library &3.
INZPCS command successfully completed.
Error retrieving data area &1 in library &2.
Error creating data area QINZPCSDA in library QUSRSYS.
Error updating data area QINZPCSDA in library QUSRSYS.
Failed to delete data area &1 in library &2.
Unexpected virtual disk error condition &5/&6 occurred.
Internal error Reason code &1 occurred.
IWS2001: The total number of fields to be transferred is larger than the maximum of 256.
IWS2002: The required INTO clause was not found or was not specified.
IWS2003: The INTO clause is incorrectly specified.
IWS2004: F4 key is not allowed with specified TO clause.
IWS2007: The record format of the specified source physical file is not correct.
IWS2008: The total length of fields to transfer is greater than the maximum of 4096 bytes.
IWS2010: The member was not created.
IWS2011: Journaling error occurred while attempting to open member.
IWS2012: Unable to clear member of existing data when attempting to open the member.
IWS2013: Duplicate key in record not allowed in member &3 of file &2 in library &1.
IWS2014: Incorrect data fields in record.
IWS2015: An incorrect value was specified for the field reference file.
IWS2016: File &2 in library &1 member &3 is at maximum size.
IWS2017: Select/omit error on member &3 of file &2 in library &1.
IWS2018: Duplicate key prevented for member &3 of file &2 in library &1.
IWS2019: Not authorized to library &1 to create a file or member.
IWS2021: REPLACE * is not allowed if FILETYPE(DATA) is specified.
IWS2022: Member &3 of file &2 in library &1 already exists.
IWS2023: Data already exists in member &3 of file &2 in library &1.
IWS2024: Incorrect value in the CRTFILE value.
IWS2025: Blanks are not allowed in the field reference file name.
IWS2026: Incorrect value in FILETYPE.
IWS2027: Incorrect value in the RCDLEN value.
IWS2028: If RCDLEN is specified, * must be specified on the REPLACE clause.
IWS2029: If CRTFILE(YES) is specified, then RCDLEN or REFFILE must be specified.
IWS2030: Value in PUBAUT is incorrect.
IWS2031: Incorrect description in FILETEXT value.
IWS2032: A file cannot be created without a member.
IWS2033: Value in CRTMBR is incorrect.
IWS2034: Description in MBRTEXT is incorrect.
IWS2035: The request contains characters that do not follow the correct format.
IWS2036: File &2 in library &1 already exists.
IWS2037: Field reference file &2 in library &1 is not a data base physical file.
IWS2038: A library name of *LIBL or QTEMP is not allowed if file &1 is to be created.
IWS2039: Field &3 not found in field reference file &2 in library &1.
IWS2040: The source file was not created because field &1 is not a permitted field for a source file.
IWS2041: The source file was not created.
IWS2042: You are not authorized to create a physical file.
IWS2043: File text contains an unbalanced quotation mark.
IWS2044: Member text contains an unbalanced quotation mark.
IWS2045: Cannot add a member to DDM file &2 in library &1.
IWS2046: Incorrect value in IGCDTA.
IWS2047: Conversion of the text failed.
IWS2050: OPTIONS statement is not correct.
IWS2051: Invalid option specified for keyword IGNDECERR in OPTIONS statement.
IWS2052: Invalid date format specified in OPTIONS statement.
IWS2053: Invalid time format specified in OPTIONS statement.
IWS2054: Invalid date separator specified in OPTIONS statement.
IWS2055: Invalid time separator specified in OPTIONS statement.
IWS2056: Invalid decimal separator specified in OPTIONS statement.
IWS2057: Invalid operand specified for the VALUE function.
IWS2058: Invalid operand specified for the CURRENT function.
IWS2059: Invalid operand specified for the DIGITS funtion.
IWS2060: Invalid operand specified for the CHAR funtion.
IWS2061: Invalid operand specified for the DATE funtion.
IWS2062: Invalid operand specified for the TIME function.
IWS2063: Invalid operand specified for the TIMESTAMP function.
IWS2064: Invalid operand specified for the YEAR function.
IWS2065: Invalid operand specified for the MONTH function.
IWS2066: Invalid operand specified for the DAY function.
IWS2067: Invalid operand specified for the DAYS function.
IWS2068: Invalid operand specified for the HOUR function.
IWS2069: Invalid operand specified for the MINUTE function.
IWS2070: Invalid operand specified for the SECOND function.
IWS2071: Invalid operand specified for the MICROSECOND function.
IWS2072: Incorrect constant specified for IS/ISNOT comparison.
IWS2073: Operands not compatible for function &1.
IWS2074: Sort sequence table could not be retrieved.
IWS2075: Language identifier is not valid.
IWS2076: Sort sequence table is not valid.
IWS2077: Incorrect style value specified in OPTIONS statement.
IWS2501: The transfer request is not correct.
IWS2502: The SELECT clause is not correct.
IWS2503: The number of fields or functions in the SELECT clause is greater than the limit of 256.
IWS2504: Value supplied to function is not permitted.
IWS2505: Unbalanced parentheses were found or parentheses are missing.
IWS2506: SELECT clause is not correct.
IWS2507: The required FROM clause was not found.
IWS2508: The number of files in the FROM clause is greater than the limit of 32.
IWS2509: The FROM clause is not correct.
IWS2510: Required join comparisons not found.
IWS2511: Incorrect operator in join comparison.
IWS2512: The number of join comparisons specified is larger than the limit of 32.
IWS2513: The number of comparisons in the WHERE clause is larger than the limit of 50.
IWS2514: Incorrect value in the WHERE clause.
IWS2515: The substring function in the WHERE clause was incorrect.
IWS2516: An incorrect operator found in a WHERE clause comparison.
IWS2517: String constant in WHERE clause is not permitted with an arithmetic operator.
IWS2518: Incorrect string for LIKE comparison.
IWS2519: Incorrect constant for BETWEEN comparison.
IWS2520: Incorrect BETWEEN comparison in WHERE clause.
IWS2521: Incorrect constant for IN comparison.
IWS2522: The number of constants for IN comparison is greater than the limit of 100.
IWS2523: The GROUP BY clause is not correct.
IWS2524: The number of GROUP BY fields is greater than limit of 50.
IWS2525: SELECT field &1 is not allowed unless &1 is a GROUP BY field.

Length: 232045 Date: 20200927 Time: 063323

Count: 1184     sap01-206 ( 867 ms ) This documentation is copyright by IBM.