OS/400 Messages

Are you looking for the description of OS/400 (System i) messages e.g. CPF9801? Then you have come to the right place. Below you can see a (hoefully) complete list of of all OS/400 messages with all “second level texts”.

Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43


Complete OS/400 Messages Documentation From SYX5306 up to ZZZ

Complete OS/400 Messages Documentation From SYX5306 up to ZZZ

This documentation is copyright by IBM.
Count: 9072 Skipped: 0
OS/400 Messages
Description
Creation date
Already connected to host &1.
Cannot find host &1.
Port number specified, &1, must be numeric.
Port number &1 not valid.
Connecting to remote host &1 using port &2.
Not authorized to access file &1 in library &2.
Host name exceeds maximum length of &1 bytes.
Valid host name specified, but no address found.
Cannot resolve host name at this time.
Error processing MPUT parameter &1.
File &1 in library &2 not found.
File &1 in library &2 destroyed.
File &1 in library &2 suspended.
File &1 in library &2 damaged.
File &1 in library &2 locked.
Cannot connect to host &1 at address &2. Try again later.
Not able to determine job ID.
Connecting to host &1 at address &2 using port &3.
&1
Unable to receive data from TCP/IP.
Unable to send data to server.
Print list completed.
Print details completed.
CFGTCPSNMP
CFGTCPTELN
?CHGFTPA
CFGTCPSMTP
?CHGLPDA
MTU value for TCP/IP &5 &2 changed.
MTU value can be increased.
PVC value &3 removed from TCP/IP interface &2
No line description for TCP/IP interface &2.
Line description for TCP/IP interface &3 renamed.
MAXSVC value for TCP/IP interface &2 changed.
Interface &1 cannot be used.
Interface &1 not changed.
CFGTCPHTTP
CFGTCPWSG
?CHGPOPA
?CHGRXCA
?CHGTFTPA
CFGTCPBP
Print list completed.
Line type not valid.
No port restrictions
No remote system information
No host table entries
Value must be specified.
Cannot display work with panel.
Entry cannot be displayed.
TCP/IP attributes changed successfully.
TCP/IP attributes not changed.
TCP R1 value greater than TCP R2 value
Error accessing member &3
Attribute file keyword &4 missing
Attribute file keyword &4 not valid.
IPv6 temporary address preferred lifetime not valid.
Local domain name not valid.
Local host name not valid.
Local domain name or host name cannot be blank.
Remote name server address not valid.
Local domain name and local host name changed.
Combined local domain name and host name too long.
Remote name server changed.
TCP/IP domain information not changed.
Search list domain name not valid.
Search list limited to six domain names.
Server name &1 not found in library &2, file &3, member &4
?CHGDDMTCPA
?CHGDHCPA
?CHGDNSA
&1 server not active, end request ignored.
&1 server not started, required product not installed.
?CHGNTPA
Instance can not be specified.
INSTANCE parameter cannot be specified.
TCP/IP attributes of the &2 command changed by user &6.
TCP/IP server &1 added successfully.
TCP/IP server &1 not added.
TCP/IP server &1 already exists.
TCP/IP server &1 does not exist.
SVRNAME '&2' already exists in TCP/IP server &4.
SVRTYPE '&3' already exists for TCP/IP server &4.
TCP/IP server &1 cannot be changed or removed.
SVRSPCVAL &1 not valid.
TCP/IP server &1 does not exist.
TCP/IP server &1 changed successfully.
TCP/IP server &1 not changed.
TCP/IP server &1 removed successfully.
TCP/IP server &1 not removed.
Internet address &2 not valid.
Internet address &1 not valid.
Specified host name not valid.
Duplicate internet address &2 found in host table.
Internet address entry &4 added to host table.
Internet address entry &4 removed from host table.
Internet address entry &1 does not exist.
Internet address &1 not valid.
Duplicate host name &3 at address &4 found in host table.
Host Name
Internet Address
LOOPBACK internet address &2 not valid.
Internet address entry &4 added to host table; duplicate host names found.
Host name not added to host table.
Text description for internet address &4 already exists in host table.
Record format not valid in file &1, member &2, record &3.
NIC entry type &4 not supported.
File &1, member &3, successfully merged with host table.
File &1, member &3, merged with host table: however, errors occurred.
Records of file &1, member &2 not valid.
Multiple internet addresses not supported for NIC record.
Host table not available.
Internet address entry &4 changed in host table.
Internet address entry &4 changed in host table; duplicate host names found.
Internet address entry &5 renamed to &4 in host table.
IPV6-LOOPBACK internet address &1 not valid.
Merge file &1, member &3, in library &2 not found.
RSI
All host names for internet address &2 are blank.
Error in host table file.
&1 completed successfully.
Parameter value &1 not valid.
Internal state not valid.
&1 currently active.
TCP/IP currently ending.
TCP/IP did not start.
Duplicate configuration data detected. Data ignored.
Internal error while starting &1.
Not able to create internal space.
&1 ended abnormally. Reason code is &2.
TCP/IP Connectivity Utilities not installed.
TCP/IP LPP not installed or not at correct version level.
Remaining servers not ended.
TCP/IP Connectivity Utilities server &2 not started.
&1 server starting.
&1 server not started.
&1 failed.
Error occurred submitting interface job.
Another job is starting or ending TCP/IP or IP over SNA.
Error occurred starting TCP/IP servers.
Reply C to cancel starting all servers or G to allow them to start. (C G)
TCP/IP Connectivity Utilities server &2 not ended.
&1 server ended.
&1 server not ended.
STRTCP started for user &4 in job &3/&2/&1.
ENDTCP started for user &4 in job &3/&2/&1.
Not able to determine if job &3/&2/&1 started.
Start subsystem QSYS/QSYSWRK to complete &1 processing.
Cannot process request while &3/&2/&1 using &6.
Reply C to cancel ending all servers or G to allow them to end. (C G)
STRTCPSVR not allowed. TCP/IP is not active.
Values selected only valid for SERVER(*HTTP)
Values selected only valid for SERVER(*HTTP)
Values selected only valid for SERVER(*DNS)
Values selected only valid for SERVER(*DNS)
Values selected only valid for SERVER(*TCM)
SERVER parameter value must match RESTART parameter value.
Value selected only valid for SERVER(*ASFTOMCAT).
Parameter &1 value '&2' not valid.
TCP/IP started successfully in restricted state by &1.
STRTCP error occurred. Reason &2.
Interface &1 on &3 started in the restricted state by user &2.
Interface &1 type &2 can not be started in limited mode.
Request from media library &1 to start interface &2.
File &1 library &2 member &3 cannot be converted or migrated when in the restricted state.
&4 not allowed. Subsystem &1 not available (&3).
&5 processing not performed. STRTCP performed by job &3/&2/&1, status &4.
ENDTCPABN started for user &4 in job &3/&2/&1.
ENDTCPABN not allowed at this time. Reason code &1.
Required subsystem &1 not active.
&1 not active.
Error occurred ending TCP/IP.
TCP/IP already ending with *CNTRLD option.
Internal object damaged.
Error occurred submitting job.
Ending of &1 in progress.
Error occurred ending TCP/IP server jobs.
&1 completed successfully; however errors occurred.
Error occurred ending QTCPEND job.
Error in state of &1 protocol stack.
TCP/IP is ending for system &1. (G C)
Cannot complete controlled end of TCP/IP.
Cannot complete controlled end of TCP/IP.
Job &3/&2/&1 started.
Job &3/&2/&1 ended.
interface
route
port
attribute
RSI
Unable to determine if &1 interface started.
Cannot determine if &1 interface started.
User &7 started IP interface &1 on &3.
&1 interface successfully started; however, one or more MTU values for associated routes changed.
&2 interface not started. Reason &1.
Activating &3 to start IP &1 for &10 in &6/&5/&4.
User &7 in job &6/&5/&4 started TCP/IP &3 interface &1.
&1 completed; See job log for additional information.
&2 interface not started.
Interface &1 line &2 not started. Maximum &7 active interfaces allowed.
&1 interface not started. &1 interface already active.
&1 interface not started. &1 interface not defined in the TCP/IP configuration.
&1 interface not started. Line description &2 not found.
Line description &2 unusable. Internal errors encountered.
&2 interface not started.
Interface &1 not started. Local interface &2 inactive.
Only one *OPC interface can be active at a time for subnet &2.
TCP/IP started.
WARNING: Host &2 also using IP &1.
&1 interface not started.
&1 interface not started
&1 interface not started for *TDLC line description &2.
TCP/IP ended abnormally. Reason code &1.
Status of *&1 &2 is &5.
Delaying processing for *&1 &2. Retry in &3 seconds.
Activation request &5 issued.
Activation request &5 complete. Code &3.
Job &3 not using &6. Reason &1. &2 seconds.
Cannot start interface &8 for &7. Line &1 in use by protocol *&3.
Cannot start profile &8 for &7. Line &1 used by protocol *&3.
Cannot activate line &1. Protocol *&3 is using line &1.
&1 requires &2.
QTCPWRK system job could not inform the user job of &1 interface status.
TCP/IP is ending.
Unable to determine if &1 interface ended.
Cannot determine if &1 interface ended.
User &7 ended IP interface &1 on &3.
&2 interface not ended. Reason &1.
User &7 in job &6/&5/&4 ended TCP/IP &3 interface &1.
&1 interface not ended.
&1 interface not ended. &1 interface is not active.
&1 interface not ended. &1 interface not defined in the TCP/IP configuration.
&1 interface not ended. Line description &2 not found.
Interface &1 not ended. Interface &2 is using &1.
Point-to-point interface &1 not ended. Use ENDTCPPTP.
Unable to submit request to end interface &1.
Conversion of TCP/IP configuration data started.
Not able to determine NEXTHOP.
&1 member record length not correct.
Error occurred processing member &1 of &2/&3.
Keyword not recognized.
Program &1 not able to create internal space.
Corresponding record not found.
Too many TCP/IP links defined.
Not able to determine TCP/IP interface subnetmask value.
TCP/IP route not converted.
Default MTU value &1 used for TCP/IP interface.
Default MTU value &1 used for TCP/IP route.
Validation of TCP/IP interface &1 failed.
Not able to determine RTEDEST or SUBNETMASK.
Validation of TCP/IP route failed.
Validation of port restriction failed.
&1 configuration file member converted.
Validation of TCP/IP remote system information failed.
&1 member conversions successful, &2 member conversions not successful.
File &1 in library &2 not found.
File &1 in library &2 not a source file.
Member &3 in source file &1 in library &2 already exists.
Files have different record lengths.
Specified TOFILE same as FROMFILE.
Command &1 cannot be converted.
Member has been converted.
Member &3 in file &1 in library &2 is not correct type.
Parameter keyword cannot be converted in command &1.
Syntax errors detected.
Command &1 requires manual conversion.
Command &1 converted, but the resulting command is commented out.
Parameter LIND for command &1 cannot be converted.
Parameter RVSCRG for command &1 not converted.
Command &1 with SBS parameter value *ALL not converted.
Member &3 in file &1 in library &2 not found.
No command required conversion in member &1.
Convert TCP/IP CL Report &2/&1 &3 &4 Page &5
Library . . . . . . : &1
Source Statement
Member Sev Number Message
To file . . . . . . . : &1
Member . . . . . . . :
Detail Analysis
From file . . . . . . : &1
Message Summary
ID Sev Total Message Text and Description
* * * * * E N D O F D E T A I L A N A L Y S I S * * * * *
* * * * * E N D O F M E S S A G E S U M M A R Y * * * * *
* * * * * E N D O F C V T T C P C L S P O O L E D F I L E * * * * *
Message
Configuration file member successfully created.
Configuration file member created using default values.
Configuration file member successfully converted.
Configuration file member converted using default values.
Configuration file member &1 was cleared.
TCP/IP server jobs active.
TELNET session ended. Connection closed.
Library
Incoming ASCII/EBCDIC table
Outgoing EBCDIC/ASCII table
Virtual display device ended. Connection closed.
No storage available. Connection closed.
Telnet user exit parameter &3 must be '0' or '1'.
Telnet user exit parameter &3 value &4 not valid.
Telnet user exit parameter &3 attribute at offset &4 not valid.
Program for exit point &1 format &2 received exception &3.
Telnet session has been refused for client &5 port &4.
The TELNET server port not configured.
Server job could not lock job control block.
Server job received a streams error.
Server job received a socket error &1.
Access to port &1 is restricted.
Secure Sockets Layer Telnet not started.
Device &1 associated with client &4 port &3 has been recovered.
Server job received an SSL socket initialization error &1.
Job: &1/&2/&3 Device: &4 Status: &5 &6 IP: &7 : &8.
Server mapping tables
Process completed successfully.
Error accessing configuration member.
Configure TCP/IP HTTP
Work with HTTP Configuration
Program &1 not able to create internal space.
Sequence number &1 is not valid
Configuration entry not valid.
Configuration file member &1 of file &3 in library &2 has reached the limit of 10000 entries.
Duplicate sequence number &1 found in configuration file.
Display option only, configuration file in use.
Configuration file maximum record length not valid
Change HTTP Attributes
Number of server threads
Minimum
Maximum
Autostart
Configuration name
No configuration entries
Minimum number of server threads specified greater than maximum.
CCSID parameter value &1 not valid.
CCSID parameter value &1 not found.
Program &1 in library &2 received the wrong number of parameters.
Program &1 in library &2 type *PGM ended abnormally.
Log file &2 with log indicator &1 is full, no additional logs will be saved.
A mismatch exists between log file &2/&1 and the log format.
Insufficient number of parameters for directive (Line Number &2 or Sequence Number &1)
Method missing or not valid on Disable directive (Line Number &2 or SequenceNumber &1)
Method missing or not valid on Enable directive (Line Number &2 or Sequence Number &1)
Timeout parameter not valid (Line Number &2 or Sequence Number &1)
Unknown DirAccess mode (Line Number &2 or Sequence Number &1)
Unknown LogFormat parameter (Line Number &2 or Sequence Number &1)
Unknown LogTime parameter (Line Number &2 or Sequence Number &1)
Incorrect parameter on Port directive (Line Number &2 or Sequence Number &1)
Unknown configuration directive (Line Number &2 or Sequence Number &1)
OK-Gateway.
OK-Redirect
Too many arguments (Line Number &2 or Sequence Number &1)
DirShowMaxDescriptionLength parameter not valid (Line Number &2 or Sequence Number &1)
DirShow directive not valid (Line Number &2 or Sequence Number &1)
DirReadme mode not valid (Line Number &2 or Sequence Number &1)
Number of parameters on directive not valid (Line Number &2 or Sequence Number &1)
Unknown Dir directive (Line Number &2 or Sequence Number &1)
User not authenticated.
User not authorized.
Forbidden by IP.
Forbidden by IP for Proxy.
Forbidden by rule.
No ACL file.
No ACL entry.
Setup error.
DOT-DOT in URL.
HTBIN off.
Redirect not valid.
No such user.
Put not allowed.
URL not found.
Multi failed.
Path not allowed.
HTTP Restart
Server error.
HTTP server unable to start. Configuration errors were detected.
HTTP server unable to start. Initialization errors were detected.
HTTP server cannot start due to errors encountered.
HTTP server detected a program control error. Process terminating.
Problem detected with instance file &1 in library &2.
Problem detected with attribute file &1 in library &2.
Program &1 has &2 arguments which exceeded the maximum of &3.
HTTP Server instance &1 is already active.
A mismatch exists between log file &1 and log format.
Error encountered while loading function. Server terminated.
Cannot create socket.
Cannot set socket option.
Cannot create SSL socket.
Parameter &2 for &1 option is invalid.
Configuration file &1 not found.
Extra parameter &1.
Unknown command line option &1.
The server cannot start with SSL mode on because SSL security is not installed.
Failed to bind and listen on port &1.
The server cannot start with normal mode off.
The server cannot start with normal mode off and ssl mode off.
Cannot resolve to the SSL functions.
Log file &2 cannot be opened.
No parameter for &1 option.
SSL initialization failure.
Failure in &1 rc=&2 and errno=&3.
Error writing to log file &2. No additional logs will be saved.
DirShowMaxLength directive not valid (Line Number &2 or Sequence Number &1)
DirShowMinLength directive not valid (Line Number &2 or Sequence Number &1)
Syntax error in Protection Setup (Line Number &2 or Sequence Number &1)
Protection setup name undefined in (Line Number &2 or Sequence Number &1)
Parameter for UseAcls directive is not valid (Line Number &2 or ) Sequence Number &1
Parameter for IdleThreadTimeout directive is not valid (Line Number &2 or Sequence Number &1).
Parameter for SSLMODE directive is not valid (Line Number &2 or Sequence Number &1)
Parameter for NORMALMODE directive is not valid (Line Number &2 or Sequence Number &1)
Syntax error in config file. Missing brace for protection directive or (Line &2 or Sequence &1)
Both SSL and normal modes have been turned off. (Line Number &2 or Sequence Number &1)
The HTTP server cannot be started by user &1. Authority problem.
Keyfile directive missing or not valid.
Unable to access keyring file.
HTTP server unable to start with self signed certificate.
Certificate has expired.
Keyring password has expired.
Error loading Server API &1 *SRVPGM from library &2.
Error loading Server API procedure &3 in &1 *SRVPGM from library &2.
Server API Serverinit Initialization Application error.
Server API Datafilter requires all the procedures to be in the same *SRVPGM.
Error threshold exceeded for Server API initialization, Serverinit, or Serverterm procedures.
The *SRVPGM configured in Server API directive &1 is not found in the QSYS file system.
Server API procedure &2 parameter &1 is not valid.
Server API Datafilter directive does not have the correct number of procedures.
Server API procedure &3 parameter &1 is not valid.
Server API directive &1 does not define a *SRVPGM.
Syntax Error in Server API directive.
Two Datafilter directives found.
Server API directive does not define a *SRVPGM. (Line Number &2 or Sequence Number &1)
Server API *SRVPGM is not in the QSYS file system. (Line Number &2 or Sequence Number &1)
Error establishing CGI stdio support, error code = &1.
Error resetting CGI stdio support, error code = &1.
More than one Datafilter directive found. (Line Number &2 or Sequence Number &1)
Datafilter directive missing procedure(s). (Line Number &2 or Sequence Number &1)
Error reading from STDIN.
All data provided was not successfully written to STDOUT.
&1 Error: Function &2: Connection request to &3 will exceed the maximum allowed.
&1 Error: Function &2: Prepare of the SQL statement failed. &3
&1 Error: Function &2: Database name is required.
&1 Error: Function &2: The value of &3 is not valid for variable &4.
&1 Error: Function &2: The request to clear table object failed.
&1 Error: Function &2: The variable &3 is an unknown type.
&1 Error: Function &2: Table not found in language environment argument list. Request rejected.
&1 Error: Function &2: The building of the statement object failed.
&1 Error: Function &2: The statement failed. &3
&1 Error: Function &2: Unable to determine the number of columns selected. &3
&1 Error: Function &2: Database access class library error: &3.
&1 Error: Function &2: Retrieval of row &3 failed. &4
&1 Error: Function &2: Rollback of database(s) failed. &3
&1 Error: Function &2: Commit of database(s) failed. &3
&1 Error: Function &2: Disconnect of database &3 failed. &4
&1 Error: Function &2: Connection to database &3 failed. &4
&1 Error: Function &2: Internal binding of local variables failed. &3
&1 Error: Function &2: Describe of column number &3 failed. &4
&1 Error: Function &2: Warning occurred during &3 operation. &4
&1 Error: Function &2: Warning occurred during binding of local variables to columns. &3
&1 Error: Function &2: Warning occurred during statement processing. &3
&1 Error: Function &2: Warning occurred while determining the number of columns. &3
&1 Error: Function &2: TRANSACTION_SCOPE is MULTIPLE, previous errors prevent further SQL operations.
&1 Error: Possible APAR condition. Failure point is &2. Error Number is &3.
&1 Error: Storage allocation request failed.
&1 Error: File &2 not found.
&1 Error: CGI CONTENT_TYPE of &2 for data that was submitted with HTTP request is not supported.
&1 Error: Value for &2 in &3 is not set or is not valid.
&1 Error: Line &2, &3 language environment not available.
&1 Error:
&1 Error: Line &2, the call to language environment's &3 routine did not complete successfully.
&1 Error: Line &2, number of arguments on function call not valid.
&1 Error: Line &2, a string literal or NULL string can not be a modifiable return parameter.
&1 Error: Object specified in &2 not found.
&1 Warning: RETURN_CODE variable not found. NULL string will be used as function value.
&1 Error: Maximum length of a token has been exceeded. Maximum length is &2.
&1 Error: FUNCTION block &2 not found.
&1 Error: Cyclic variable definition encountered for &2.
&1 Warning: Line &2, variable &3 contains a value that is not valid. Default will be used.
&1 Error: Variable &2 has a value which is not valid.
&1 Error: The name (&2) in the &3 variable is not the name of a table variable.
&1 Warning: Default variable &2 is being used. Value is overridden.
&1 Error: Row variable name overflow.
&1 Error: The host name specified in URL &2 is not found.
&1 Error: A communications end point could not be created for accessing object at URL &2.
&1 Error: Connection establishment failed while attempting to connect to server specified in URL &2.
&1 Error: Server specified in URL &2 returned a status code of &3.
&1 Error: An I/O error occurred while attempting to retrieve object specified in URL &2.
&1 Error: Language environment type or service program name is not set or not valid.
&1 Error: Routine &2 not found in language environment service program &3.
&1 Error: The activation of the language environment service program &2 failed.
&1 Error: Conversion errors occurred when converting from CCSID &2 to CCSID &3. Error Number is &4.
&1 Error: Quoted string at line &2 of file &3 can not span multiple lines.
&1 Error: Include object specified in &2 at line &3 of file &4 not found.
&1 Error: Include object nesting level exceeded maximum. Unable to open &2 at line &3 of file &4.
&1 Error: Unable to open include object specified in &2 at line &3 of file &4.
&1 Error: Data in HTML FORM element contains quoted string that spans multiple lines.
&1 Error: Include object specified in &2 in data of the HTML FORM element is not found.
&1 Error: Include object nesting level exceeded maximum in HTML FORM data. Unable to open object &2.
&1 Error: Data in HTML FORM element not valid.
&1 Error: Unable to open include object specified in &2 in data of HTML FORM element.
&1 Error: A &2 statement encountered that attempts to use an already defined variable (&3).
&1 Error: A duplicate &2 statement encountered for variable (&3).
&1 Error: Data in HTML FORM element contains duplicate HTML(&2) section.
&1 Error: Unexpected end-of-file occurred while parsing data in HTML FORM element.
&1 Error: An incorrect symbol &2 was encountered while parsing data in HTML FORM element.
&1 Error: An incorrect symbol &2 was encountered at line &3 of file &4.
&1 Error: Unexpected end-of-file occurred while parsing object &2 at line &3.
&1 Error: Duplicate HTML(&2) section encountered in object &3 at line &4.
&1 Error: No HTML(&2) section in object &3.
&1 Error: Table &2 not found.
&1 Error: Line &2, &3 variable not allowed in an &4 command.
&1 Error: Line &2, &3 variable not allowed in a &4 system variable.
&1 Error: Line &2, &3 variable not allowed in another &4 variable definition.
&1 Error: Line &2, &3 variable not allowed in a conditional string.
&1 Error: Line &2, &3 variable not allowed in a &4 variable.
&1 Error: Line &2, &3 variable not allowed in a &4 statement.
&1 Warning: Line &2, &3 error code is &4.
&1 Error: Function call to &2 failed. Error Number is &3.
&1 Error: Language environment does not support a &2 value of &3.
&1 Error: Access to object specified in &2 is not allowed.
&1 Error: Function argument not valid.
&1 Error: Maximum length of a string has been exceeded. Maximum length is &2.
&1 Error: Variable definition for &2 not found.
&1 Error: &2 clause entry not found.
&1 Error: Line &2, functions with the same name must have equivalent parameter lists.
&1 Error: A report could not be generated because a table was not defined.
&1 Error: Operation on table object did not complete successfully.
&1 Error: Line &2, Static variable definitions are not allowed after data has been sent.
&1 Error: Line &2, Data cannot be sent until a DTW_ACCEPT or DTW_TERMINATE function has been called.
&1 Error: Function &2: File &3 could not be opened with the specified mode.
&1 Error: Function &2: File &3 could not be closed because it was not open.
&1 Error: Function &2: A read operation on file &3 resulted in more data than the maximum supported.
&1 Error: Function &2: The path specified in FFI_PATH exceeds the maximum number of bytes allowed.
&1 Error: Function &2: Requested operation on file &3 failed with error message:
&1 Error: Function &2: Request failed. File &3 not opened with the correct mode to perform operation.
&1 Error: Function &2: Request failed. Registry &3 already exists.
&1 Error: Function &2: Request failed. Registry &3 is either in use or it does not exist.
&1 Error: Function &2: Request failed. Registry entry &3 already exists in registry &4.
&1 Error: Function &2: Request failed. Registry entry &3 does not exist in registry &4.
&1 Error: Function &2: Request failed. Registry &3 not found.
&1 Error: Function &2: Request failed. Path in registry &3 does not exist.
&1 Error: Function &2: Request failed. You do not have the proper authority to registry &3.
&1 Error: Function &2: Registry &3 failed to create.
&1 Error: Function &2: Internal code failure at code point &3.
&1 Error: Function &2: Request failed. Parameter &3 contains a null value.
&1 Error: Function &2: Request failed. Parameter &3 contains a null string.
&1 Error: Function &2: The number of parameters passed is not correct.
&1 Error: Function &2: Request failed. Parameter &3 is not a table.
&1 Error: Function &2: Request failed. Parameter &3 is not a string.
&1 Error: Function &2: Request failed. Parameter &3 is not an OUT or an INOUT parameter.
&1 Error: Function &2: Request failed. Parameter &3 contains a value which is not valid.
&1 Error: Function &2: Request failed. Value &3 is outside of the table bounds.
&1 Error: Function &2: Not all of the requested data could be returned.
File member &1 in library &2 not available.
Job system name
Spooled file created
Creation time
Verify TCP/IP Connection
Send ARP Request
Change TCP/IP Attributes
TCP keep alive
TCP urgent pointer
TCP receive buffer size
TCP send buffer size
UDP checksum
Configure TCP/IP
IP reassembly time-out
IP time to live (hop limit)
Configure TCP/IP Applications
Application
TCP close connection message
Network file cache
Cache size
10-100000 megabytes
ARP cache timeout
Log protocol errors
IP datagram forwarding
IP source routing
Enablement
Interval
Path MTU discovery
IP QoS enablement
IP QoS datagram batching
IP QoS timer resolution
*NOMAX,30-604800 sec (1week)
TCP minimum retransmit time
Cached file timeout
Change TCP/IP Attributes Int
TCP maximum segment lifetime
TCP R1 retransmission count
TCP R2 retransmission count
UDP receive buffer size
UDP send buffer size
IP datagram reassembly in IOP
IP packet train timeout
Change TCP/IP Interface
Line description
Autostart
X.25 idle circuit timeout
X.25 maximum virtual circuits
X.25 DDN interface
TRLAN bit sequencing
Add TCP/IP Interface
Remove TCP/IP Interface
Add TCP/IP Route
Route destination
Next hop
Remove TCP/IP Route
Change TCP/IP Route
Associated local interface
Preferred binding interface
Route metric
Route redistribution
Duplicate route priority
TCP time-wait timeout
IP dead gateway detection
Enable ECN
Address prefix length
DAD maximum transmits
Privacy extensions
Interface ID
Binding line description
Preferred interfaces
Preferred line descriptions
ICMPv6 error msg burst limit
ICMPv6 error msg send rate
IPv6 hop limit
IPv6 dup route load sharing
IPv6 temp addr valid lifetime
IPv6 temp addr pref lifetime
Copy TCP/IP Host Table
DHCP lease
DHCP dynamic DNS updates
DHCP unique identifier
IPv6 temp addr excluded prefix
DHCP client identifier
IPv6 SAC generate global addr
Action
Current value
Alias name
Add TCP/IP Host Table Entry
Host names
Name
Name, generic*, *ALL
Remove TCP/IP Host Table Entry
Merge TCP/IP Host Table
File format
Replace host table
Change TCP/IP Host Table Entry
Rename TCP/IP Host Table Entry
New internet address
End TCP/IP
Start TCP/IP
Start TCP/IP Interface
End TCP/IP Interface
Start TCP/IP Server
Server application
End TCP/IP Server
Start application servers
End application servers
Restart server
Start TCP/IP interfaces
SNTP service
Start point-to-point profiles
Start IPv6
HTTP server
Server instance
Instance startup values
Instance
End TCP/IP Abnormal
Instance name
DNS server
TCM server
ASFTOMCAT server
Server instance name
Add TCP/IP Server
Change TCP/IP Server
Remove TCP/IP Server
Server special value
Server name
Server type
Program to call
Confirm
Change OSPF Attributes
Router identifier
Comparison type
Boundary routing
Autostart server
Subagent monitor
Rebuild
Add OSPF Interface
Interface identifier
Connection profile
Area identifier
Retransmission interval
Transmission delay
Router priority
Interval for hello
Database exchange timeout
Inactive router timeout
Cost
Interface usage
Subnet
Authentication type
Authentication values
Demand circuit
Suppression of hello
Point-to-point poll interval
Nonbroadcast link
Nonbroadcast interval
Neighbor router list
Instance
Eligible
Internet address
Authentication key identifier
Authentication key
Change OSPF Interface
Remove OSPF Interface
Add OSPF Area
Stub area
Stub cost
Import
IP version
Change OSPF Area
Remove OSPF Area
Add OSPF Range
IP address range
Subnet mask
Prefix length
Advertise
Change OSPF Range
Remove OSPF Range
Add OSPF Virtual Link
Neighbor router
Link transmission area
Change OSPF Virtual Link
Remove OSPF Virtual Link
OSPF Version
Option
Configuration information
State information
Interface
Neighbor
Link state advertisement
Display OSPF
Configure Routing Protocols
Change RIP Attributes
Condition
Accept default
Send only
IPv6 condition
IPv6 accept default
IPv6 cost
IPv6 send only
Add RIP Interface
Receive RIP
Receive dynamic networks
Receive dynamic subnets
Receive prefix routes
Receive dynamic hosts
Send RIP
Send default routes
Send static routes
Send host routes
Send network routes
Send subnet routes
Send prefix routes
Send poisoned reverse routes
Send router advertise routes
RIP filter
Destination route
Filter type
In metric
Out metric
RIP version 2
Remove RIP Interface
Change RIP Interface
Add RIP Accepted Route
Remove RIP Accepted Route
Add RIP Filter
Remove RIP Filter
Change RIP Filter
Add Ignored RIP Neighbor
Remove Ignored RIP Neighbor
New filter type
New subnet mask
New prefix length
Display RIP Information
Display RIP Information
RIP IPv4 protocol status
Display RIP Interfaces
Number of interfaces
RIP interface list
Filters
Display IPv6 Interfaces
Display RIP Interface Details
Interface address
MTU
Number of filters
Display RIPng Interfaces
Number of IPv6 interfaces
RIPng interface list
Prefix
Interface internet address
Display RIPng Interface Detail
Display Accepted Routes
Display RIP filters
Number of IPv6 filters
RIP filter list
Display RIPng Filters
RIPng filter list
Display Ignored RIP Neighbors
Number of ignored neighbors
Ignored RIP neighbors list
Number of accepted routes
RIP accepted routes list
Route address list
Ignored neighbors list
Number of IPv4 filters
Filter list
Display RIP Interface Filters
RIPng protocol status
Convert TCP/IP CL Source
Default packet size
X.25 reverse charge
X.25 idle circuit timeout
Default window size
Transmit packet size
Receive packet size
Transmit window size
Receive window size
Network address
Add TCP/IP Remote System
Add TCP/IP interface
Remove TCP/IP Remote System
Remove TCP/IP interface
PVC logical channel identifier
Route destination
Next hop
End TCP/IP Connection
Work with TCP/IP Network Sts
Maximum transmission unit
Type of service
PVC logical channel identifier
Remove TCP/IP Port Restriction
*UDP, *TCP
Add TCP/IP Port Restriction
Range of port values
Name
User profile
Protocol
Lower value
Upper value
Change TCP/IP Domain
Host name
Domain name
Host name search priority
Domain name server retry
Initial time interval
Number of retries
Domain name server
Remove Protocol Table Entry
Remove Network Table Entry
Network
Internet address
Add Network Table Entry
Aliases
Add Protocol Table Entry
Protocol number
Work with Protocol Table Entry
Work with Network Table Entry
Add Service Table Entry
Service
Port
Remove Service Table Entry
Work with Service Table Entry
Domain search list
Initial domain name server
Remote system
Message mode
Packet length (in bytes)
Number of packets
Wait time (in seconds)
Response message detail
Summary, if response errors
Range of hops to probe
Probes sent per hop
Source IP address
Base remote port
Lookup host names
Probing protocol
Response wait time
Trace TCP/IP Route
Allow fragmentation
Starting probe TTL (hop limit)
Maximum probe TTL (hop limit)
Address version format
Subnet mask
Local internet address
Remote internet address
Local port
Remote port
Identifier, *
Name
1-65535, *ONLY
1-65535
Community name
Manager internet address
Object access
Log set requests
Log get requests
Translate community name
Log traps
System contact
System location
Send authentication traps
Automatic start
Trap managers
System description
Allow SNMPv3 support
Default sub-agent timeout
Maximum sub-agent timeout
Add Community for SNMP
Configure TCP/IP SNMP
Change Community for SNMP
Change SNMP Attributes
Remove Community for SNMP
SNMP engine identifier
SNMP engine boots
System description
Manager internet address mask
Allow duplicate identifiers
Add User for SNMP
Change User for SNMP
Remove User for SNMP
User name
Authentication protocol
Authentication password
Privacy protocol
Privacy password
Key type
Storage type
Trace TCP/IP Application
TCP/IP application
Trace option setting
Maximum storage for trace
Trace full action
Trace title
Remote network address
IP address
Subnet mask or Prefix length
Port number
Address family
User profile
IP address or UNIX path
Recipient mail address
Recipient host name
Local network address
Device description
Device type
Manufacturer type and model
Trace point
Argument list
Virtual private network server
Certificate services type
Domain name service
Additional traces
TCP/IP data to trace
QOS trace type
PPP connection profile
HTTP server instance
Trace level
Trace program
Library
Packet rules trace points
Configuration object
Type
Change RouteD Attributes
Autostart
Trace
Supply
Configure TCP/IP RouteD
Work with RouteD Configuration
Change BOOTP Attributes
Change TFTP Attributes
Autostart server
Number of server jobs
ASCII single byte CCSID
Connection response timeout
Minimum
Maximum block size
Work with BOOTP table
Allow file writes
Allow file writes
Allow overwrite
Assigned directories
Alternate source directory
Alternate target directory
Coded character set identifier
Maximum
Server inactivity timer
Configure TCP/IP BOOTP
Enable subnet broadcast
Change DHCP Attributes
Mode
Change DHCP Server
State
Remove TCP/IP Table
Configure Point-to-Point TCPIP
End Point-to-Point TCP/IP
Start Point-to-Point TCP/IP
Work with Point-to-Point TCPIP
Configuration profile
Operating mode
Script dialog output
Send inquiry message
Autodelete configuration
Restart
Name, *AUTOSTART
Hexadecimal value, *SAME
LCP configuration values
Async control character map
Configuration retry timer
Max authentication attempts
Max configuration failures
Max configuration requests
Max terminatation requests
Remote peer challenge timer
Minutes, *NONE
Minutes, *SAME, *NONE
0.1-60.0 seconds, *SAME
0.1-60.0 seconds
1-255, *SAME
LCP authentication values
Enable IPv4
Enable IPv6
Local IPv4 address
Remote IPv4 address
IPv4 datagram forwarding
IPv6 datagram forwarding
Managed address configuration
Other configuration
Accept default route
Advertise default route
Add Point-to-Point Profile
Modem
Enable PPP authentication
PPP authentication
Full masquerading
Allow remote address override
Authentication protocol
User name
User name and password
15-65535 seconds, *NOMAX
Remove Point-to-Point Profile
Delete communications config
Add default route
Print Point-to-Point Profile
1-7200 seconds, *SAME, *MAXADJ
Client adjustment threshold
Client autostart
Server autostart
Server activity log
Synchronization required
Change SNTP Attributes
Client poll interval
Client minimum adjustment
Client maximum adjustment
Client activity log
1-1440 minutes, *SAME
0-300000 milliseconds...
1-120 minutes, *SAME
Add SMTP List Entry
Remove SMTP List Entry
Filter data
IPv4 address
IPv6 prefix
IPv6 address
CHILD ALREADY EXISTS
COLLECTION IS EMPTY
CURSOR NOT CONTAINED IN COLLECTION
CURSOR NOT FOR GIVEN COLLECTION
CURSOR NOT FOR THIS COLLECTION
IDENTICAL COLLECTION
INVALID CURSOR
INVALID POSITION
INVALID REPLACEMENT
KEY ALREADY EXISTS
KEY NOT CONTAINED
COLLECTION IS UNBOUNDED
OUT OF MEMORY
ROOT ALREADY EXISTS
Workstation abnormally ended the connection with an unknown error code.
An internal mutex error occurred
An internal lock error occurred
An internal unlock error occurred
An internal lock request terminated with a time-out
The Debug Tool ended normally.
The application ended abnormally.
Internal error occurred, see the job log for more information.
Internal error occured in passing text to system command.
THE FOLLOWING EXPRESSION MUST BE TRUE, BUT EVALUATED TO FALSE: %1.
OUT OF MEMORY: UNABLE TO ALLOCATE MEMORY.
An invalid DBCS string was specified.
An error occurred while converting a MBCS string to a wide character string
A protected fuction of a class was called; it can produce unpredictable results
Unable to acquire a semaphore to satisfy the setLock() request
ATTEMPT TO ALLOCATE AN ISTRING THAT IS TOO BIG.
ATTEMPT TO INDEX BEYOND THE END OF A CONST ISTRING.
&1 failed with errno = &2, return code = &3
Add Autostart Job Entry
Add Program
Add Job Queue Entry
Add Routing Entry
Add Work Station Entry
Allocate Object
Apply Programming Change
Patch Program
Call Program
Change Autostart Job Entry
Change Command
Change Card File
Change Control Unit Desc
Change Debug
Change Device Description
Change Diskette File
Change Job
Change Line Description
Change Message Queue
Change Object Owner
Change Pointer
Change Program Variable
Change Printer File
Change Job Queue Entry
Change Routing Entry
Change Subsystem Description
Change Spooled File Attributes
Change Output Queue
Change System Value
Change User Profile
Change Variable
Change Work Station Entry
Clear Diskette
Clear Library
Clear Output Queue
Command Definition
End Job
End Reader
Delete Spooled File
End Writer
Print Error Log
Copy File
Create CL Program
Create Class
Create Command
Create Card File
Create Control Unit Desc
Change Command Object
Create Device Description
Create Diskette File
Create Display File
Create Edit Description
Create Logical File
Add Logical File Member
Create Library
Create Line Desc (BSC)
Add Message Description
Create Message File
Create Message Queue
Create Physical File
Add Physical File Member
Create Printer File
Create Print Image
Create Subsystem Description
Create Output Queue
CL var for text CCSID (5 0)
CL var for data CCSID (5 0)
Create Table
Create User Profile
Deallocate Object
Data
Start Debug
Declare CL Variable
Declare File
Dependent Definition
Add Breakpoint
Add Trace
Remove Breakpoint
Delete Class
Delete Command
Delete Control Unit Desc
Remove Program
Delete Device Description
Delete Diskette Label
Delete Edit Description
Delete File
Remove Job Queue Entry
Delete library
Receiver size options
Delete Line Description
Remove Member
Remove Message
Remove Message Description
Delete Message File
Delete Message Queue
Delete Override
Delete Program
Delete Print Image
Remove Routing Entry
Delete Subsystem Description
Delete Output Queue
Case of value
Delete Table
Remove Trace
Delete User Profile
Allow update
Help book
Dump Job
Dump System Object
Display Breakpoints
Display Class
Display Controller Description
Display Debug
Display Data Base Relations
Display Device Configuration
Display Device Description
Display Diskette
Display Edit Description
Create Cluster Admin Domain
Display File Description
Display File Field Description
Work with Job
Display Library
Problem origin
Display Library List
Display Line Description
Display Log
Display Messages
Edit Object Authority
Display Object Description
Display Override
Display Program References
Display Program Variable
Work with Subsystem Jobs
Display Subsystem Description
Install Program Temporary Fix
Display Spooled File
Work with Spooled File Attr
Work with Output Queue
HIPER PTFs only
Display Service Status
Work with Subsystems
Product description
Work with System Status
Display System Value
PTF omit list
Display Trace
Display Trace Data
PTF apply type
Display User Profile
Element Definition
Signature
Query Problem Status
Auto problem create
Go To
Grant Object Authority
Hold Job
Hold Reader
Hold Spooled File
Hold Output Queue
Hold Writer
If
Initialize Diskette
Batch Job
Move Object
Override with Card File
Override with Data Base File
Override with Diskette File
Override with Display File
Override with Printer File
Parameter Definition
Program
Create APAR
Power Device
Qualifier Definition
Receive Message
Return
Reorganize Physical File Mbr
Release Job
Release Reader
Update Description Text
Release Spooled File
Release Output Queue
Release Writer
Rename Diskette
Update Diagnostic Text
Rename Object
Change Library List
Restore Library
Restore Object
Restore User Profiles
Retrieve Message
Revoke Object Authority
Update Private System Text
Save Library
Save Object
Save System
Submit Job
Sign Off
Send Break Message
Send File
Send Message
Send Program Message
Send/Receive File
Send Reply
Start Service Job
Display Diagnostic Text
Display Private System Text
Start Subsystem
Convert to CCSID
Transfer Control
Trace Job
Trace Internal
Display Description Text
End Subsystem
End System
Vary Control Unit
Vary Device
Vary Line
Wait
Power Down System
Create Job Description
Delete Job Description
Display Job Description
Remove Autostart Job Entry
Remove Work Station Entry
Reroute Job
Transfer Job
Change Display File
Load Programming Change
Remove Programming Change
Start Confidence Check
Create Tape File
Change Tape File
Override with Tape File
Start Card Reader
Start Card Writer
Start Data Base Reader
Start Diskette Reader
Start Diskette Writer
Start Printer Writer
Clear Job Queue
Create Job Queue
Delete Job Queue
Work with Job Queue
Release Job Queue
Display Authorized Users
Clear Physical File Member
Initialize Physical File Mbr
Display Tape
Duplicate Diskette
Initialize Tape
Change Data Area
Create Data Area
Declare Data Area
Delete Data Area
Display Data Area
Monitor Message
Receive Data Area
Receive File
Retrieve Job Attributes
Retrieve System Value
Send Data Area
Answer Line
End Service Job
Do Group
End Do Group
End Batch Job
End Program
End Debug Mode
Resume Breakpoint
Else
Dump Object
Restore Authority
Clear Trace Data
End Receive
Start Problem Determination
Power Control Unit
Hold Job Queue
Work with Commitment Def
Status
Logical unit of work ID
License key input
License key file
License key
Expiration date
Vendor data
Processor group
Number, *LOCAL, *REMOTE, *ALL
License key member
System serial number
Vx, VxRy, VxRyMz
Vx, VxRy, VxRyMz, *ALL
Vx, VxRy, VxRyMz, *ONLY
Identifier
Identifier, generic*, *ALL
5001-9999
5001-9999, *ALL
Add License Key Information
Dependent entries
Job message queue maximum size
Job message queue full action
CL var for JOBMSGQMX (2 0)
CL var for JOBMSGQFL (10)
Display License Key Info
Remove License Key Information
Number
Display Directory Entries
Work with Directory Entries
Change System Dir Attributes
Directory
Change Message File
Address type
Name or address
Type
Protected conversation
Work Objects by Primary Group
Primary group
Primary group option
Primary group value
Change Object Primary Group
Message data CCSID
End Request
Dump Job Internal
Print Internal Data
Reclaim Resources
Override Message File
Verify Printer
Create Source Physical File
Add Tape Cartridge
Remove Tape Cartridge
Display Tape Cartridge
Change Tape Cartridge
Work with Tape Cartridge
Delete Device Media Library
Create Tape Category
Delete Tape Category
Create Device Media Library
Display Tape Status
Category
Category system
Check volume identifier
Cartridge ID
Station
Category name
Create Bound CL Program
Create CL Module
Optimization
Debugging view
Activation group
Change Service Attributes
Analyze problem automatically
Report problem automatically
Report problem to
PTF install type
Critical messages to user
Display Service Attributes
Change User Print Info
Display User Print Info
Retrieve User Print Info
CL var for DFTCCSID (5 0)
Add Wireless Line Member
Change Wireless Line Member
Add Wireless Ctl Member
Change Wireless Ctl Member
Display Wireless Ctl Member
Hardware Resource
Display Wireless Line Member
Activate swt network backup
Align page
Allocate storage
Where allowed to run
Form type
Answer mode
S/38 answer tone
APAR identifier
Autoanswer
Length of variable
Autodial
Logical file member
First-level message text
New volume identifier
Spooled output queue
Check for active files
Nonproductive receive timer
Class
Command
Comparison data
Connection type
Message data fields formats
Code
Condition
Constant value
Context or library
Contiguous storage
Copies
Message text, or
Creation date
Create file
Controlling conditions
Controller description
Currency symbol
Expiration date for member
Valid reply values
Data base file
Decimal point character
Delay time
Remove message
Relational expression
Reset old messages
Extent of change
Device
Value length
File
Device type
Default value
Dial mode
Delivery
Allow delayed connection
Drop line
Device class
Device address
Add EWC PTC Entry
Data terminal ready delay
Edit description
Characters for end of data
Change EWC PTC Entry
Display EWC PTC Entry
Remove EWC PTC Entry
Add EWC Barcode Entry
Exchange identifier
Execution priority
Select
Change EWC Barcode Entry
Display EWC Barcode Entry
File separators
File type
Fill character
Diskette format
Remove EWC Barcode Entry
Start Remote Writer
Translate table
Media format
Record format field mapping
Rcd format selector program
Fold records
Form size
Form type
Fraction mask
Records to force a write
Call Bound Procedure
Procedure
Allow reinitialization
Product
From file
Copy from record key
Copy from record number
Full field required
Hold spooled file
Hopper number
Idle detection time
Print image
Spooled output schedule
Include records by char test
Data base files to include
Programs to include
Include records by field test
Inhibit write
Initial program to call
Work with Registration Info
Exit point
Input file
Exit point format
Integer mask
Program invocation level
Job name
Reclaim DB Cross-Reference
Check Object Integrity
Job separators
Allocation
Key file
CL var for KEYVAR (4)
Keyword
Command label
Value length
Characters 1 - 6
Characters 7 - 12
Characters 13 - 18
Check domain
Check program and module
Logical file
Member, if desired
Left constant characters
Library
Line description
Switched line list
OU number of line port
Allow search
User-defined fields
Field name
Product ID
Errors allowed
Characters to display
Initial connection
Physical wire connection
Data comm equipment group
Non-IBM modem
Switched connection type
Buffer offset
Include internal configuration
Type of data
Dump identifier
Maximum field length
Function
Value
Replace module object
Lines per inch
Record format level check
Access path maintenance
Maximum values allowed
Maximum active jobs
Maximum jobs
Maximum members
Max spooled output records
Overriding to message file
Output file prefix
Application requester driver
Maximum active routing steps
Member
Replace or add records
Minimum values required
Member data
Mode in which valid
Model number
Message text
Message file
Message identifier
CL var for MSGKEY (4)
Message queue
Message type
Maximum devices
Number of records to copy
Negative status characters
Work with Order Requests
Display Tape Category
New object
New owner
New owner identifier
CL var for OVFASP (1)
CL var for USRDFNATR (10)
New volume identifier
Nonproductive receive time
NRZI data encoding
CL var for ALWAPICHG (1)
Object
Object type
CL var for APICHG (1)
CL var for SAVACTDATE (13)
CL var for PGP (10)
CL var for OBJSIG (1)
New offset in space
CL var for RTNTEXT
PC numbers to omit
Online at IPL
Remote system
Remote printer queue
Source listing options
Writers to autostart
Option
How to end
File to receive output
Output
Connection type
Overflow line number
Parameters
Pass attribute byte
Physical file
Message key
Destination type
Transform SCS to ASCII
Manufacturer type and model
Workstation customizing object
Program
Internet address
Program variables
Forms Control Buffer
Maximum spooled file size
Number of pages
Starting time
Message file for prompt text
Ending time
User defined text
Storage pool identifier
Library device
Positive status characters
Which records to print
Printer
Prompt text or message ID
Default activation group
Public authority
Eligible for purge
Field type
Range of values
Line speed
Modem data rate select
Record format of logical file
Record format lock
Record length
Reader
Select procedures to trace
Thread ID to include
Reply
Request data or command
Restore Object
Diskette/tape error retries
Right constant characters
Save Object
Reclaim Object Links
Unprintable character action
Message queue to get reply
Name
Include or omit
Directory subtree
Time period for last change
Restricted values
Restore to library
Object ID
Date when saved
Save spooled file
Time when saved
Subsystem
Subsystem description
Second-level message text
PC numbers to select
Type of sender identifier
Sequence
Sequence number
Trace option setting
Severity code
Member size
Single values
Special authority
Special values
Spooled file
Spooled file number
Output queue
Spool the data
Source file
Source member
Source update options
Char output start position
To member identifier
Source change date
Status
Storage
Internal object subtype
Switched connection
Switched network backup
System value
Table
Connection number
Text 'description'
Time slice
To file
Copy to record key
To library
To member or label
To message queue
Copy to record number
To work station message queue
Type
Type of value
Controller type
Data link role
Reply type
Type of log data to list
Type of information
Preferred storage unit
User profile
User password
User profile
New value
Valid values
Varying length
Validity checking program
Volume identifier
Maximum file wait time
Maximum record wait time
Resume writing at
Work station name
Work station type
Writer
Edit zero values
Control unit address
Speed select feature
Drop line at signoff
File label
Objects
CL var for SECLVLLEN (5 0)
Default program
Maximum trace statements
Update production files
Statement identifier
Trace full
Breakpoint program to call
Output format
End severity
Wait
Skip value
Variable
Operator
Compare value or variable
Breakpoint condition
Command
Print format
Data type
Pointer to be changed
Address to be pointed to
When output
Clear data
Job description
Job queue
Object specifications
Output priority (on OUTQ)
Message logging
Job priority (on JOBQ)
Routing data
Initial library list
Default wait time
Maximum CPU time
Maximum temporary storage
Pointer type
Return value
Job date
Job switches
Secure from other overrides
Share open data path
Block length
Record block format
Extend file
Volume statistical data
Times to print
Spooled files (enter job name)
Member sharing access path
Diskette label
Run time period
Program to call before trace
Dkt/tape error log threshold
Tape density
PDP identifier
Trace type
Tape reels specifications
End of tape option
Access path recovery
Max % deleted records allowed
Display any file
Operator controlled
Number of true dependencies
Force to auxiliary storage
Program message queue
Data to be dumped
CL var for MSGLEN (5 0)
CL var for msg data
CL var for MSGDTALEN (5 0)
CL var for RTNTYPE (2)
Send to program message queue
From diskette locations
To diskette locations
Generation options
Data area
CL var for JOB (10)
CL var for USER (10)
Comparison data
Time period for log output
Library
User
Number
Spool file number
Access path size
Node group
Partitioning Key
Convert Pfr Thread Data
Trace statements to remove
Storage pools
Storage pool
Statements to trace
Length
Initial value
Overriding to printer file
File size
Queue size
CL variable name
Starting position in file
Dependent parameter
Physical file data members
Total number of records
Work stn controller address
Work stn controller keyboard
Tape label
Attached nonswitched line
Command to execute
Messages to display first
Maximum allowed storage
Value an expression
Hold spooled files
Diskette location
Device description
Display device
Card form type
CL var for 1st level text
CL var for MSGID (7)
Record length, if no DDS
Save file
CL var for 2nd level text
CL var for SENDER (80)
CL var for SEV (2 0)
Source file
Source member
Library type
Internal object type
CL syntax check
Returned routing data CL var
Message data field values
Initialize records as
Default reply value
Default program to call
Overridden file
Overridden file name
Maximum reply length
Log in service log
Log
Program to call
Program to process command
Range of reply values
Relationship for valid replies
Routing entry sequence number
Special reply values
System object
Highest schedule priority
Users
Libraries for current thread
Maximum storage to use
Delete spooled files
User whose jobs to display
Hold on job queue
Autostart job entry
Job queue entry job queue
Job name
Card device
Queue for reader messages
Members
Message queue for writer msgs
Diskette device
Printer
Device
Device
Workstation printer device
Break handling program
Severity code filter
Send to non-pgm message queue
Jobs to display
Device model
Seconds to run
Object types
Saved library
Frame retry
Attached nonswitched ctls
Source file containing image
Attached devices
File expiration date
Overriding to card file
File being overridden
Overriding member
Overriding to data base file
Records retrieved at once
Overriding to diskette file
Overriding to display file
Volume identifier
If a file parameter, how used
Prompt specifications
Parameter CL variable names
CL variable for returned value
Record format
CL var for responding device
Message file being overridden
Overriding to tape file
Patch data
Belt part number
Storage size
Starting statement identifier
Ending statement identifier
Program variable
Basing pointer variable
Pool identifier
Storage size
Activity level
Compare value
Starting position
Display file
Record format
Level
Severity
Text
Length
Decimal positions
Length--lines per page
Width--positions per line
Replace character
Replacement character
Unit identifier
Starting diskette
Ending diskette or EOV action
Unit
Label processing type
Number of reels
Initial number of records
Shared pool or subsystem name
Maximum increments
Relational operator
Value
Lower value
Upper value
From value
To replacement value
Error type
Maximum times to retry
Threshold error type
Retrieve order
*RRN-rcd nbr *KEY-nbr key flds
*KEY-rec format having key
*KEY-key value
Lock state
Keyword or keyword reference
Number to be true
Character position
Field
Value or keyword reference
Lower value or keyword ref
Upper value or keyword ref
Order prompt is displayed
Member, if data base file
Original from-value
Replacement to-value
Beginning time
Beginning date
Ending time
Ending date
Relationship
Number of key fields
Key value
Data type
*VARY bytes or dec pos
Relationship
Line
Offset position for patch
Old data in hex
New data in hex
Checksum hash total in hex
Initial storage size
Increment storage size
Value or keyword reference
Increment number of records
Line to be tested
Request level
Job log
Compress out deleted records
Hexadecimal offsets
Area of space to dump
Hexadecimal offset
Hexadecimal length or *
Limit to sequential only
Sequential only
Number of records
Program level
Control unit
Time period for internal data
Unit
Ending diskette
Source file
(*NORMAL *ALL *NONE)
Tape device
Relationship
Length specification
Maximum log entries
Check expiration date
Normal wire type
Backup type, if SWNBKU
CL var for NBR (6)
CL var for TYPE (1)
CL var for DATE (6)
CL var for SWS (8)
CL var for RTNCDE (5 0)
CL var for CNLSTS (1)
Restore display
Source sequence numbering
Starting sequence number
Increment number
Adapter configuration
Hop identifier
Root cell
Frequency
Data rate
Radio system identifier
Presystem identifier
Destination ID
Transport port
PTC group
PTC ID range
Intensity
Clear end of file
Status line
Cursor type
Inactivity timer
Backlight timer
Backlight key
Bypass exit
Automatic run
Printer
Wand type
Wand pecking rate
Laser read timer
Barcode function keys
Cursor location
Short scan
Scan end of file
Fast poll interval
Fast poll delay
Fast poll decay
Slow poll interval
Destination hop
Barcode group
Barcode type
Label length
First check digit
Second check digit
All zeros
Alpha display
Add on 2
Add on 5
System 1 UPC-E
System 0 UPC-E
UPC-E
EAN 13
Add on
Drop begin
Drop end
Start Query Manager for i5/OS
Print Command Usage
Clean Printer
Work with Submitted Jobs
Work with Readers
Work with Writers
Create Communications File
Change Communications File
Override with CMN File
Reclaim Storage
Convert Date
Check Object
Display Message File
Display Message Description
3203 printer device
SSCP identifier
Logon characters
Logoff characters
Jobs submitted from
Communications device
Overriding to CMN file
Record separator character
When to end writer
When to hold writer
Auto-terminate writer
Starting page
When to terminate writer
Start with card number
Allow display by DSPSBMJOB
Detail
Date to be converted
CL var for converted date
From date format
To date format
To date separator
Level of message
Level number
Creation date
Message identifier
Range of message identifiers
Start Watch
End Watch
Watch program
Watch
Compare against
Work Objects by Private Auth
Restart after next IPL
Start Job Log Server
End Job Log Server
CL var for LOGOUTPUT (10)
Job log output
Work with Watches
Work with Traces
File Commands
Object Management Commands
Database File Commands
Device Management Commands
Program Commands
Debug Commands
Message Handling Commands
Abnormal Commands
Spooling Commands
F3=Exit
F4=Prompt
F9=Retrieve
F12=Cancel
F16=Major menu
Analyze Database Files
System Control Commands
Work Management Commands
Configuration Commands
Security Commands
Save and Restore Commands
Command Commands
Active Commands
Add Commands
Allocate Commands
Answer Commands
Analyze Database File Keys
Analyze Access Group
Analyze Programs
Create Menu from Msg Files
Change PC Organizer Profile
Change S/36 Configuration
Apply Commands
Delete Windows Server
Call Commands
Cancel Commands
Change Commands
Check Commands
Adopt Commands
Clear Commands
Commit Commands
Compare Commands
Display PDF Map Entries
Set User Usage for BRM
Create RJE BSC File
Create RJE Communication File
Create S/36 RPG II Program
Convert Commands
Copy Commands
Create Commands
Alert Commands
Deallocate Commands
Declare Commands
Delete Commands
Analyze Commands
Display Commands
Do Commands
Create S/36 RPG II Auto Report
Create SQL COBOL Program
Create SQL PL/I Program
Create SQL RPG Program
Create S/36 COBOL Program
Create S/36 Display File
Dump Commands
Create RPG Program
Create Auto Report Program
Duplicate Commands
Create COBOL Program
Edit Commands
Eject Commands
APAR Commands
End Commands
APPC Commands
Create S/36 Menu
Create S/36 Message File
Restore Object using BRM
Convert RJE Data
Save Object using BRM
Convert To Folder
APPN Commands
Format Commands
Go Commands
Start COBOL Debug
End COBOL Debug
Grant Commands
Hold Commands
Initialize Commands
Journal Commands
Async Commands
Work with Containers using BRM
Delete DFU Program
Job Watcher Commands
Display S/36 Configuration
End Job Trace
End RJE Session
Load Commands
Change Data
Ask Commands
Display Data
Log Commands
Authorization List Commands
Back Commands
Start Source Entry Utility
Merge Commands
Start Data File Utility
Submit Domino Command
Delete Integrated Server
End S/36 Session
Extract Program Information
Start Archive using BRM
Work with Control Groups
Batch Commands
BGU Commands
Monitor Commands
Mode Description Commands
Code Commands
Move Commands
Start Screen Design Aid
Override Commands
Format Data
Configuration List Commands
Model System
Work with PDF Map Entries
Delete DBCS Sort Table
Print Component Report
Print Job Trace
Print Lock Report
Power Commands
Configure VM/MVS Bridge
Query Commands
Receive Commands
Reclaim Commands
Release Commands
Remove Commands
Rename Commands
Reorganize Commands
Replace Commands
Print System Report
Print Transaction Report
Set Program Information
Start PC Organizer
Reroute Commands
Restore Commands
Resume Commands
Retrieve Commands
Return Commands
Revoke Commands
Communication Mgmt Commands
Save Commands
Send Commands
Service Commands
Start CGU
Start Job Trace
Start PC Command
Start PDM
Start Performance Tools
Sign Commands
Start Commands
Contact Commands
Submit Commands
Conversation Commands
Trace Commands
Transfer Commands
Vary Commands
Verify Commands
Wait Commands
Start SQL Interactive Session
Start S/36 Session
Create DFU Display File
Delete PDF Map
Start S/36 Procedure
Advanced Printer Function Cmds
Class-of-Service Desc Commands
Authority Commands
Autostart Job Entry Commands
Breakpoint Commands
BSC Commands
BSC File Commands
Component Commands
Copy Screen Commands
Update Data Using Temp Program
Work with Forms Control Table
Work with Libraries using PDM
Work with Members using PDM
Work with Objects using PDM
Work with RJE Session
Cross-Domain Commands
Console Commands
Current Commands
CL Commands
Class Commands
COBOL Commands
Cmd Definition Stmt Commands
Communications Commands
Communications Entry Commands
Communications File Commands
Work with Session Description
Problem Management Commands
Procedure Commands
Product Commands
Print Queue Commands
Create Session Description
Change Session Description
Delete Session Description
Date Commands
Control Commands
Add RJE Reader Entry
Change RJE Reader Entry
Remove RJE Reader Entry
Remote Work Station Commands
Add RJE Writer Entry
Program Temporary Fix Commands
Pointer Commands
Password Commands
Query File Commands
Question Commands
Record Commands
Change RJE Writer Entry
Remove RJE Writer Entry
Controller Desc Commands
Add RJE Communication Entry
Change RJE Communication Entry
Remove RJE Communication Entry
Data Commands
Change Forms Control Table
Create Forms Control Table
Delete Forms Control Table
Reference Commands
Start RSE Server
Remote Commands
Roll Commands
RPDS Commands
Report Commands
Data Queue Commands
Data Area Commands
Add Forms Control Entry
Change Forms Control Entry
Remove Forms Control Entry
Database Commands
Cancel RJE Reader
Start RJE Reader
DDM File Commands
Cancel RJE Writer
Reply Commands
Request Commands
Resource Commands
Run Commands
Screen Commands
Start RJE Writer
Device Commands
Default Commands
Start RJE Session
Directory Entry Commands
Device Description Commands
Start RJE Console
Mode and Module Commands
Document Lib Objects Commands
Submit RJE Job
Screen Design Aid Commands
SDLC Commands
Source Entry Utility Commands
SNUF Commands
Sphere of Control Commands
Spelling Aid Dictionary Cmds
Data File Utility Commands
Distribution List Commands
Diskette Commands
Diskette File Commands
Display File Commands
Edit Description Commands
Emulation Commands
Dist List Entry Commands
Forms Control Table Commands
Image Commands
SQL Commands
Source File Commands
System Service Tools Commands
Storage Commands
Status Commands
Internal Machine Commands
Job Commands
Job Description Commands
Job Queue Commands
Job Queue Entry Commands
Distribution Queue Commands
Journal Receiver Commands
Library Commands
Library List Commands
Line Commands
System/36 Commands
System/38 Commands
TDLC Commands
TIE Commands
TIE File Commands
Transaction Commands
Line Description Commands
Lock Commands
Distribution Services Commands
Logical File Commands
Menu Commands
Message Commands
Data Management Commands
Verb Commands
Subject Commands
To Commands
Update Commands
Usage Commands
Value Commands
Variable Commands
Work Commands
Down Commands
Message File Commands
Message Queue Commands
Error Commands
Network Commands
Extract Commands
Output Queue Commands
Forms Control Table Entry Cmds
Physical File Commands
Virtual Work Station Commands
Local Work Station Commands
Initialize IBM i PC Support
X.25 Commands
3270 Emulation Commands
Create Console Display File
Add Phy File Variable Len Mbr
Print Commands
Printer File Commands
Profile Commands
Folder Commands
Reader Commands
Form Description Commands
Recovery Commands
Reply List Commands
RJE Commands
RJE Control Commands
Config List Entry Commands
Support Network Commands
Help Commands
Copy DBCS Master Sort Table
Licensed Commands
Routing Entry Commands
RPG Commands
Session Commands
Session Description Commands
Source Commands
Spooled File Commands
From Commands
Subsystem Commands
Subsystem Description Commands
System Commands
Create File Commands
Create PDF Map
Move Media using BRM
Commands
Education Commands
Help Commands
System Value Commands
Tape Commands
Tape File Commands
Create RJE Configuration
Table Commands
User Commands
User Profile Commands
Work Station Entry Commands
Writer Commands
Graphics Data Format Commands
Collection Commands
Search Index Commands
PDF Map Commands
Disk Commands
File Commands
Start Advanced Print Function
Display RJE Configuration
Pass-Through Commands
Delete RJE Configuration
Graphic Symbol Set Commands
Hardware Commands
Select Commands
Address Commands
Start Disk Data Collection
End Disk Data Collection
Print Disk Activity Report
Save DLO using BRM
Related Command Menus
High Level Language Commands
Holder Commands
Host Commands
ICF Commands
ICF File Commands
IDDU Commands
Work with Queries
Information Commands
Input Commands
Work with Devices using BRM
Create Program Commands
Application Commands
C Commands
Cross System Product Commands
Intrasystem Commands
ITF Commands
Service Agent Commands
Job Entry Commands
Keyboard Commands
Key Commands
Label Commands
Link Commands
MAC Commands
Map Commands
Maximum Commands
Prestart Job Commands
Pool Commands
Retail Commands
Find Commands
Add Media to BRM
Print Job Interval Report
Member Commands
Model Commands
Manager and Migration Commands
Master Commands
Network File Commands
Object Commands
Message Description Commands
Object Type Commands
Print Pool Report
Print Resource Report
Find String Using PDM
Alert Table Commands
Prestart Job Entry Commands
Off Commands
Order Commands
Merge Form Description
Out Commands
Output Queue Descr Commands
Selection or command
Option
Dictionary Commands
AFP Commands
Font Resource Commands
Form Definition Commands
Page Segment Commands
Overlay Commands
Phase Commands
Delete Chart Format
Display Chart
Start BGU
Close Commands
Open Commands
Graphics Commands
Accounting Commands
Text Commands
Chart/Clustered Hash Table Cmd
Print AFP Data
Start Backup using BRM
Change S/36 Message List
Conversion Commands
Form Commands
Select one of the following:
Owner Commands
Delay Commands
Definition Commands
Set Commands
Access Code Commands
Attention Commands
Distribution Commands
TCP/IP Commands
LPDA Commands
Query Management Commands
Shared Pool Commands
Display Performance Data
Work with System Activity
Directory Commands
Document Commands
Finance Commands
Personal Computer Commands
IWS Commands
Group Commands
Send Distribution using JS
Save File Commands
PDM Commands
Print Activity Report
Work with Names for SMTP
Template Commands
Token Ring Adapter Commands
Clear Retail File
Performance Commands
PIN Commands
Permission Commands
Prompt Commands
Panel Group Commands
Copy From PC Document
Copy To PC Document
Cipher Data
Position Commands
Set Master Key
Delete Linux Server
Install Integrated Server
Convert To Retail File
Delete Retail File
Delete Retail Record
Print Retail Template
Change Master Key
Verify Master Key
Add Cross-Domain Key
Change Cross-Domain Key
Remove Cross-Domain Key
Generate Cross-Domain Keys
Encipher From Master Key
Encipher To Master Key
Generate Cipher Key
Encrypt Cipher Key
Receive Retail File
Submit Retail Program
Send Retail File
Send Retail Record
Work with Retail Communication
Verify TCP/IP Connection
Generate PIN
Verify PIN
Translate PIN
Generate MAC
Display Graphics Data File
Cryptographic Commands
DDM Commands
Cipher Commands
Encipher Commands
Generate Commands
Start TCP/IP File Transfer
Configure TCP/IP
Connection Commands
SMTP Commands
File Tfr Protocol Commands
Token-Ring Network Commands
Access Path Commands
Problem Commands
Delete C Locale Description
C Locale Description Commands
Disconnect Commands
Buffer Commands
Ethernet Commands
REXX Commands
Hardware Resources Commands
Name Commands
Software Commands
Generate C/C++ Source
Create C Locale Description
Retrieve C Locale Description
- Help
Set step using JS
Work with Conversion Templates
Provider Commands
Retail File Commands
Change Functional Area
Change Graph Format
Change Graph Package
Change Service Provider Attr
Copy Graph Format
User Queue Commands
Extended Program Model Cmds
Find Commands
Route Entry Commands
Port Commands
Create Graph Package
Create Historical Data
Create SQL FORTRAN Program
Delete Functional Area
Delete Graph Format
Delete Graph Package
Delete Historical Data
Delete Performance Data
Copy Graph Package
Copy Performance Data
Copy PTF to Save File
Create Functional Area
Create Graph Format
Release Program Temporary Fix
Start Performance Graphics
Start Report Layout Utility
Work with Functional Areas
Work with Supported Products
Work with Service Requesters
Area Commands
Function Commands
History Commands
Print Descriptor Commands
Delete Program Temporary Fix
Display Historical Graph
Display Performance Graph
Display Service Provider Attr
Hold Program Temporary Fix
Order Supported Product PTFs
Remote System Commands
User Space Commands
User Index Commands
Start TCP/IP TELNET
Work with TCP/IP Network Sts
End TCP/IP Connection
Add TCP/IP Link
Change TCP/IP Link
Remove TCP/IP Link
Start TCP/IP Link
Graph Package Commands
Report Layout Utility Commands
Support Commands
Copy Functional Area
Remove TCP/IP Route
Add TCP/IP Port Restriction
Remove TCP/IP Port Restriction
Find string using PDM
Start EPM Environment
End EPM Environment
Comm Side Information Commands
ISDN Commands
Network Interface Commands
Connection List Commands
End TCP/IP Link
Change TCP/IP Attributes
Add TCP/IP Remote System
Remove TCP/IP Remote System
Add TCP/IP Route
Change TCP/IP Route
Connection List Entry Commands
IDLC Commands
Attribute Commands
Protocol Commands
Page Definition Commands
Search Index Entry Commands
Domain Commands
Start NSLOOKUP Query
Delete Object
Create DPR Packages
Create DPR Tables
C++ Commands
Print Profile Internals
Cluster Resource Group Cmds
Management Collection Commands
Auxiliary Storage Pools Cmds
Analyze Performance Data
Edit Rebuild of Access Paths
Display Work Station User
Output
Schedule Commands
Schedule Entry Commands
Cleanup Commands
Rebuild Commands
Create Graphics Data File
Create SQL Package
Delete SQL Package
Relational Database Commands
Package Commands
Send Program Temporary Fix
Convert PCD to Page Segment
Convert PFM to Page Segment
Print PFD Data
Start AFP Utilities
Start Overlay Utility
Start Print Format Utility
Index Commands
Index Entry Commands
Start RJE Recovery
Add Domino Application
Create SQL Package
Delete SQL Package
Filter Commands
Action Entry Commands
Selection Entry Commands
Alert Description Commands
","*LIB")'.
End RJE Recovery
Start Alarm Manager
End Alarm Manager
Add Switch Entry
Change Switch Entry
Display Switch Entry
Remove Switch Entry
Work with Switch Entries
Backup Commands
Save Folder List using BRM
Directory Shadow Commands
SNPT Commands
Start Connection Manager
End Connection Manager
Start CDR Manager
End CDR Manager
Display Log for BRM
Remove Media Volumes from BRM
Save Media Info using BRM
Start Maintenance for BRM
Duplicate Media using BRM
Remove Media Info from BRM
Save Object using BRM
Start Recovery using BRM
Extract Media Information
Resume Retrieve using BRM
Add Project Exit
Start Expiration for BRM
Analyze Libraries using BRM
Save Library using BRM
Start Migration using BRM
Change Link List
Work with ASP Descriptions
Check Expired Media for BRM
Initialize BRMS
Save Save Files using BRM
Dump BRMS
Migrate using BRM
Restore DLO using BRM
Monitor Save While Active
Add Project Library List
Restore Library using BRM
Save Object List using BRM
Save System using BRM
Print Project Exit
Start Subsystems using BRM
Initialize Media using BRM
Restore Object using BRM
Set VT100 Keyboard Map
Change VT100 Keyboard Map
Display VT100 Keyboard Map
Change Product Object Desc
Package Product Option
Create Product Definition
Delete Product Definition
Work with Classes using BRM
Application Dev Mgr Cmds
Restore APAR Data
Delete BEST/1 Model
Create BEST/1 Model
Work with Migration Info
Work with Media using BRM
Work with Media Information
Create Product Load
Delete Product Load
Create PTF Package
Work with PTF
Create Program Temporary Fix
Start BEST/1 Planner
Display CICS Conv Vector Tbl
Remove CICS Conv Vector Tbl
Work with CICS Conv Vector Tbl
Add CICS Destination Ctrl Tbl
Change CICS Dest Control Table
Display CICS Dest Control Tbl
Remove CICS Dest Control Tbl
Work with CICS Dest Ctrl Tbl
Add CICS File Control Table
Change CICS File Control Table
Start CICS
End CICS
Start CICS User
End CICS User
Add CICS Conversion Vector Tbl
Change CICS Conv Vector Tbl
Remove CICS Group List Table
Work with CICS Group List Tbl
Add CICS Journal Control Table
Change CICS Journal Ctrl Tbl
Display CICS Journal Ctrl Tbl
Remove CICS Journal Ctrl Tbl
Work with CICS Jrnl Ctrl Tbl
Add CICS Program Control Table
Change CICS Program Ctrl Tbl
Display CICS Program Ctrl Tbl
Display CICS File Control Tbl
Remove CICS File Control Tbl
Work with CICS File Ctrl Tbl
Add CICS Group List Table
Change CICS Group List Table
Display CICS Group List Table
Work with CICS Pgm Proc Table
Add CICS System Init Table
Change CICS System Init Table
Display CICS System Init Table
Remove CICS System Init Table
Work with CICS System Init Tbl
Add CICS Terminal Ctrl Sys Tbl
Change CICS Term Ctrl Sys Tbl
Display CICS Term Ctrl Sys Tbl
Remove CICS Term Ctrl Sys Tbl
Remove CICS Program Ctrl Tbl
Work with CICS Pgm Ctrl Tbl
Add CICS Pgm Processing Table
Change CICS Pgm Processing Tbl
Display CICS Pgm Proc Table
Remove CICS Pgm Processing Tbl
Add CICS Temporary Storage Tbl
Change CICS Temporary Stg Tbl
Display CICS Temporary Stg Tbl
Remove CICS Temporary Stg Tbl
Work CICS Temporary Stg Tbl
Create CICS COBOL
Change CICS Group
Create CICS Group
Delete CICS Group
Install CICS Group
Work CICS Term Ctrl Sys Tbl
Add CICS Terminal Control Tbl
Change CICS Terminal Ctrl Tbl
Display CICS Terminal Ctrl Tbl
Remove CICS Terminal Ctrl Tbl
Work CICS Terminal Ctrl Tbl
Part Commands
Auditing Commands
Node List Commands
DDI Commands
Service Program Commands
Create C Module
Create Bound C Program
Create SQL ILE C Object
Work with CICS Groups
Create CICS Map
Print CICS Trace
CICS Commands
Binding Commands
Project Commands
Type Commands
Display Backup Plan using BRM
Print Media Movement
Display Duplicate Media
Remove Log Entries from BRM
Change Job Scheduler
Verify Moves using BRM
Copy Media Info for BRM
Work with Calendars using BRM
Display ASP Information
Run SQL Statements
Convert RPG Source
Create RPG Module
Create Bound RPG Program
Action Commands
Add Report to OnDemand
Change Policy Level Date
Create Instance for OnDemand
End Monitor for OnDemand
Find Key for OnDemand
Migrate Media
Merge Spooled Files
Print Report from OnDemand
Print Text for OnDemand
Remove Report from OnDemand
Start Archived Storage Mgmt
Start Disk Storage Management
Start Import into OnDemand
Start Monitor for OnDemand
Start Report Management Cycle
Submit Console Command
Set Step using Job Scheduler
Retrieve Cluster
Retrieve CRG
Print Admin Domain MRE
Change Ranking Group Entry
Remove Ranking Group Entry
Display Ranking Group Entry
Work with Ranking Grp Entries
Change Ranking Group
Display Policy
End Policy
Work with Policies
Add Activity
Change Activity
Remove Activity
Verify Tape
Verify Optical
Create BSC File
Change BSC File
Override with BSC File
Copy Spooled File
Retrieve CL Source
Change Job Description
Change CSNAP Attributes
Display CSNAP Attributes
Display Line Status
Display Control Unit Status
Create Ranking Group
Delete Ranking Group
Display Ranking Group
Work with Ranking Groups
Frame Relay Commands
Language Commands
Display Device Status
Change Message Description
Display Command
List CSNAP Data
List CSNAP History
Create Journal
Create Journal Receiver
Display Programming Change
Send Journal Entry
Delete Journal Receiver
Delete Journal
Work with Object Locks
Save Changed Objects
Dump Tape
Start Journal Physical File
End Journal Physical File
Change Journal
Retrieve Data Area
Dump CL Program
Display Journal
Grant User Authority
Display Journal Receiver Atr
Apply Journaled Changes
Remove Journaled Changes
Work with Active Jobs
Work with Journal Attributes
Change Source Physical File
Change Physical File
Add Device Mode
Change Physical File Member
Change Logical File Member
Change Logical File
Add Communications Entry
End Device Recovery
End Controller Recovery
End Line Recovery
Resume Line Recovery
Resume Device Recovery
Resume Controller Recovery
Create Mixed File
Add BSC Device Entry
Add Communications Dev Entry
Add Display Device Entry
Remove BSC Device Entry
Change Mixed File
Change Communications Entry
Remove Communications Entry
Change Network Attributes
Display Network Attributes
Remove CMN Device Entry
Remove Display Device Entry
End Commitment Control
Start Commitment Control
Commit
Rollback
Change Device Mode
Display Mode Status
Change Session Maximum
Copy To Diskette
Copy From Diskette
Copy To Tape
Copy From Tape
Copy Source File
Hold Communications Device
Release Communications Device
Check Tape
Check Diskette
Transfer Batch Job
Rename Member
Retrieve Journal Entry
Compare Journal Images
Create Duplicate Object
Display Menu
Add Reply List Entry
Change Reply List Entry
Display Reply List
Remove Reply List Entry
Override with Mixed File
Change Writer
Work with Journal
Add Library List Entry
Remove Library List Entry
Send User Message
Switched controller list
BSC receive timeout timer
Local identifier
Remote identifiers
BSC device delay in sec
BSC program delay in sec
BSC contention resolution
BSC device
Method of blocking records
Transmit in transparent mode
Blocking type
Record separator, if *SEP
Character code
Characters per inch
Printer file
Control character
Channel values
Channel
Line
Sampling interval
Reset status statistics
Reference object
Reference object type
Overriding to BSC file
Data base member option
Duplicate document option
Allow blinking cursor
Reorganize volume
Member to receive output
Volume identifier
To data base file
Span request units
To member
Log CL program commands
Log commands
Application type
RJE host type
RJE host signon/logon
Defer write
Truncate trailing blanks
Compress and decompress data
Group separator type
Access path type
Maximum positional parameters
Submit Diskette Jobs
Submit Card Jobs
Submit Data Base Jobs
End Input
Auto-dial telephone number
Switched local identifier
Call type
Connection type
Value to pass if unspecified
Program to dump
Job structure areas
Objects referenced by address
Job threads
Report type
Line or ctlu to compare
Date period to compare
Time period for CSNAP data
Sector size
Journal receiver
Journal
Journal receiver threshold
Journal message queue
Journal entry type
Entry data
Journaled file identification
Force journal entry
Diskette file exchange type
Restart after power down
Date period for CSNAP data
Idle disconnect timer
Journaled objects
Reference date
Reference time
Range of sequence numbers
Starting file sequence number
Ending file sequence number
Data file information to dump
Data blocks to dump
Starting data block number
Ending data block number
Dump volume label
Physical file to be journaled
Record images
Journaled physical file
Data area specification
Substring starting position
Substring length
Sequence option
Close option
Range of journal receivers
Starting sequence number
Starting date and time
Starting date
Starting time
Ending sequence number
Ending date and time
Ending date
Ending time
Number of journal entries
Journal codes
Journal entry types
Entry data length
Referenced user
Fully qualified job name
Journal code value
Starting journal receiver
Ending journal receiver
Journal code selection
Substring specifications
Line number for channel
Delay time value
Maximum delay time value
Mode
Maximum sessions
Pre-established sessions
Locally controlled sessions
Maximum conversations
Inbound pacing value
Outbound pacing value
Maximum length of request unit
Local location name
Remote LU name
Mixed file
Program device
Format select
Device specifications
System name
Commit identification
Lock level
Notify object
(*MSGQ *DTAARA or *FILE)
Commitment definition scope
New mode
Member, if *FILE
Suffix
Diskette location
Copy to exchange type
Copy to reels
File sequence number
Record block type
Copy from reels
Default user profile
Allow unprintable characters
Allow variable names
Commitment boundary
Font identifier
Form feed
Object pre-check
Commit cycle identifier
Maximum program devices
Sequence number
Creation date
Save access paths
New member
Program device to acquire
Inquiry message reply
Search
CL var for RTNSEQNBR (10 0)
CL var for RTNJRNCDE (1)
CL var for RTNENTTYP (2)
CL var for RTNJRNE (1)
Compare option
Record number
Emulation device type
Emulation keyboard type
3270 device emulation
Duplicate data
Alert status
Display menu
Message reply
Dump the sending job
Print quality
Source drawer
Diskette file
Tape file
Data base source file
Form type options
Message option
Conversation type
Problem determination code
Alert ID specifications
Alert identifier
Resource name variable
CL var for RTNRCV (10)
CL var for RTNRCVLIB (10)
CL var for ALRID (9)
CL var for PDPCODE (4)
List position
CL var for LOGLVL (1)
CL var for LOGSEV (2 0)
CL var for LOGTYPE (10)
CL var for LOGCLPGM (10)
CL var for INQMSGRPY (10)
CL var for OUTQ (10)
CL var for OUTQLIB (10)
CL var for EXCPTY (2 0)
CL var for TIMESLICE (7 0)
CL var for PURGE (10)
CL var for DFTWAIT (7 0)
CL var for USRLIBL (2750)
CL var for SBMMSGQ (10)
CL var for SBMMSGQLIB (10)
Force keyed access path
File attributes
Font specifications
Acquire program device
From member
Print image or generic* name
Control unit description
Overriding to mixed file
Display Program
Copy DBCS Font Table
Delete DBCS Font Table
Check DBCS Font Table
Create DBCS Conversion Dict
Delete DBCS Conversion Dict
Display DBCS Conversion Dict
Edit DBCS Conversion Dict
List APAR
Emulate Printer Keys
Delete Graphic Symbol Set
Start Pass-Through
End Pass-Through
Change HLL Pointer
Display Record Locks
Create Graphics Symbol Set
Open Data Base File
Close File
Change Accounting Code
Change System Library List
Transfer Secondary Job
Receive Journal Entry
Delay Job
Display Programmer Menu
Trace Connection
Trace data to be formatted
Coded character set identifier
RAMLOAD
DBCS font table
Select images
Range of images
From user code
To user code
Replace user images
Copy option
DBCS conversion dictionary
Dictionary entry
Spool file reference number
Print MTR data
Print device
User specified DBCS data
DBCS extension characters
DBCS character rotation
DBCS characters per inch
DBCS SO/SI spacing
Submit job
Emulated printer key
EOF retry delay in sec
Graphics symbol set
APPC device
Virtual controller
Virtual display device
Pointer to be copied
Maximum frame size
CPU percent limit
Response time limit
Group profile
Owner
Group authority
Data compression
Journal entries to be omitted
Open option
Open file identifier
Access path to use
Type of open
Commitment control active
CL var for ACGCDE (15)
Member to be opened
Sequential only
Number of records
Is PARM a program name
Is PARM a data area name
Accounting code
Auxiliary device
Auxiliary device type
Auxiliary device address
Is ELEM a program
Is ELEM a data area
Program to receive entries
Merge overrides
Invocation number
Job delay time
Resume job time
Log requests
Source library
Object library
Allow changes
Option 3 exit program
Delete option
Allow RTVCLSRC
Set Attention Program
Create Save File
Set Keyboard Map
Change Keyboard Map
Add Access Code
Change Document Owner
Delete Document
Delete Document List
Display Access Code
Display Access Code Authority
Display Directory
Display Document Authority
Grant Access Code Authority
Grant Document Authority
Manage Directory
Manage Distribution List
Remove Access Code
Revoke Access Code Authority
Revoke Document Authority
Restore Document
Save Document
Change Group Attributes
Transfer to Group Job
Retrieve Group Attributes
End Group Job
Retrieve User Profile
Display Keyboard Map
Clear Save File
Display Save File
Save Save File Data
Override with Save File
Display Distribution Services
Configure Distribution Service
Work with Distribution Queue
Submit Network Job
Send Network Message
Send Network File
Send Network Spooled File
Add Network Job Entry
Change Network Job Entry
Remove Network Job Entry
Work with Network Job Entries
Display Physical File Member
Work with Network Files
Delete Network File
Receive Network File
Display Job Log
Change Program
Work with Device Tables
Work with User Tables
Work with Program Tables
Display Finance Help
Submit Finance Job
Change Save File
Create Data Queue
Delete Data Queue
Display Channel Status
Display Link Status
CL var for OBJAUD (10)
Message data start position
Compare data
Set attention key
Attached work station ctl
Local network address
X.25 default packet size
Maximum packet size
X.25 default window size
Maximum buffer size
Logical channel entries
Logical channel identifier
Change Device Desc (Finance)
Logical channel type
PVC controller
Link type
X.25 address
X.25 link level protocol
X.25 response timer
X.25 reverse charging
Incoming calls
Outgoing calls
X.25 user group identifier
X.25 connection password
X.25 user facilities
PF1 key value
PF2 key value
PF3 key value
PF4 key value
PF5 key value
PF6 key value
PF7 key value
PF8 key value
PF9 key value
PF10 key value
PF11 key value
PF12 key value
PF13 key value
PF14 key value
PF15 key value
PF16 key value
PF17 key value
PF18 key value
PF19 key value
PF20 key value
PF21 key value
PF22 key value
PF23 key value
PF24 key value
PA1-PF1 key value
PA1-PF2 key value
PA1-PF3 key value
PA1-PF4 key value
PA1-PF5 key value
PA1-PF6 key value
PA1-PF7 key value
PA1-PF8 key value
PA1-PF9 key value
PA1-PF10 key value
PA1-PF11 key value
PA1-PF12 key value
PA2-PF1 key value
PA2-PF2 key value
PA2-PF3 key value
PA2-PF4 key value
PA2-PF5 key value
PA2-PF6 key value
PA2-PF7 key value
PA2-PF8 key value
PA2-PF9 key value
PA2-PF10 key value
PA2-PF11 key value
PA2-PF12 key value
List identifier
Document access code
Current owner
Time period for *SEARCH
Document class for *SEARCH
Document owner for *SEARCH
Starting time and date
Ending time and date
Starting time
Starting date
Ending time
Ending date
Document list
Document list owner
User ID
Granted to/from
Reference user profile
To user profile
Trace CPI Communications
Table type
Basing table
Basing sort sequence
Basing language ID
Message catalog name
Message catalog CCSID
Create Locale
Locale name
Source file path name
Delete Locale
Source listing
Second level messages
Source file CCSID
Merge Message Catalog
Generate Message Catalog
Retrieve Table Source
Convert to UCS-2
For user profile
From user profile
Document
Object name generation
Beginning sequence number
Ending sequence number
Device table
User table
Program table
Expiration date
Group job
Initial group program
Group job to be resumed
CL var for GRPJOB (10)
CL var for GRPJOB list (1056)
CL var for GRPJOBCNT (3 0)
CL var for MSGQ (10)
CL var for PRVGRPJOB (16)
CL var for CTLCDE (3 0)
User profile
CL var for RTNUSRPRF (10)
CL var for SPCAUT (100)
CL var for MAXSTG (11 0)
CL var for PTYLMT (1)
CL var for INLPGM (10)
CL var for INLPGMLIB (10)
CL var for JOBD (10)
CL var for JOBDLIB (10)
CL var for GRPPRF (10)
CL var for OWNER (10)
CL var for GRPAUT (10)
CL var for MSGQ (10)
CL var for MSGQLIB (10)
CL var for TEXT (50)
Location password
Secure location
Network device address
Save file
Update history
*RRN--Record number
Document password
Controller code
Node identifier
Menu option
Node ID
Node ID qualifier
Print while converting
User ID
User ID qualifier
List ID
List ID qualifier
Character identifier
Graphic character set
Code page
Network job action
Maximum hop count
Network job action
File number
Member to be received
Optimize program
System request program
Force program re-creation
User identification, or
Address regeneration
Data queue
Maximum entry length
X.25 logical channel
Logical link
Line spacing
Generation severity level
Retrieve Network Attributes
Display Program Adopt
Submit Remote Command
Reclaim DDM Conversations
Remove Device Mode Entry
Create DDM File
Change DDM File
Work with OUTQ Description
Change Storage Configuration
Display Storage Configuration
End Job Abnormal
Change Library
Change Object Description
Merge Message File
Display Distribution Log
Restore Licensed Program
Change Command Default
Display User Passwords
End Journal Access Path
Start Journal Access Path
Calculate Storage Config
Open Query File
Run time threshold
Include system SQL
File Used in SQL Statements
Library used in SQL Statements
Filter by user profile
Monitor ID
Filter by database file
Query temporary storage limit
0-2147352578 MegaBytes ...
Filter by internet address
Filter by local port number
Storage threshold
Filter by query governor
Filter by accounting string
Filter by application name
Filter by program name
Filter by client user ID
Filter by work station
Initial number of records
CL var for ALRSTS (10)
CL var for SYSNAM (8)
CL var for PNDSYSNAM (8)
CL var for JOBACN (10)
CL var for MAXHOP (5 0)
Print text
CL var for PRTTXT (30)
Degree of page rotation
Printer device type
CL var for MSGF (10)
DDM file
CL var for PWDCHGDAT (6)
SSCP identifier checking
Device wait timer
CL var for MSGFLIB (10)
APPC device description
Remote file
Nonstandard file 'name'
Order of files on queue
Auxiliary storage pool ID
Unit 1 status
Unit identifiers
ASP storage threshold
Checksum protection
Overflow status reset
Configure storage
Maximum records
DDM conversation
DDM/DRDA request access
CL var for DDMACC (10)
CL var for DDMACCLIB (10)
From message file
To message file
Checksum status
Unprotected stg per unit
Function type
Entry type
Break message handling
CL var for DDMCNV (5)
CL var for BRKMSG (7)
Output member options
Access method
Remote file attribute
Local access method
New default parameter string
Journaled file
DBCS feature
Device features
Last code point
D62PC device unit ID
D3370M11 device unit ID
D3370M12 device unit ID
D9335 device unit ID
D9332M2XX device unit ID
D9332M4XX device unit ID
Unit ID
Sign-on display file
Open options
Query selection expression
File specifications
Format specifications
Key field specifications
Unique key fields
Join field specifications
Join with default values
Join file order
Grouping field names
Group selection expression
Mapped field specifications
Allow copy of data
Performance optimization
Key field
Key field order
Order by absolute value
From field
To field
Mapped field
Field definition expression
Mapped field type
File or element
Mapped field CCSID
Optimize all access paths
0-2147352578 seconds, *SAME...
Processing option
Number of tasks
Final output CCSID
CL var for DATFMT (4)
CL var for DATSEP (1)
Work with Disk Status
Retrieve Object Description
Move Document
Change Class
Override ICF File
Maximum record length
Delete Override Pgm Dev Entry
Trace ICF
Override ICF Pgm Device Entry
Add ICF Device Entry
Create ICF File
Delete Controller Description
Send Distribution Queue
Create Device Desc (Diskette)
Create Device Desc (Display)
Create Device Desc (Printer)
Create Device Desc (Tape)
Work with Printing Status
Change Current Library
Change ICF File
Remove ICF Device Entry
Change ICF Device Entry
Position Data Base File
Work with Problem
Add Prestart Job Entry
Start Query
Delete Query
Run Query
Add Directory Entry
Remove Directory Entry
Change Directory Entry
Create Distribution List
Delete Distribution List
Add Distribution List Entry
Remove Distribution List Entry
Start Mode
End Mode
Start Concurrent Serv Monitor
Change REXX Profile
Remove Prestart Job Entry
Change Prestart Job Entry
Work with Chart Formats
Start Copy Screen
End Copy Screen
Send Service Request
Send PTF Order
Send Distribution
Query Distributions
Delete Distribution
Receive Distribution
File Document
Vary Configuration
Work with Classes
Create Device Desc (BSC)
Work with Data Areas
Work with Documents
Work with Data Queues
Work with Edit Descriptions
Prompt Control Definition
Create Device Desc (Finance)
Display Document
Edit Document
Work with Graphics Symbol Sets
Print Document
Work with Journal Receivers
Work with Message Files
Create Document
Work with Folders
Work with Programs
Work with Panel Groups
Work with Search Indexes
Work with Spelling Aid Dict
Delete Panel Group
Start Performance Monitor
End Performance Monitor
Dump Trace
Create Device Desc (Async)
Create Device Desc (SNA Host)
Create Device Desc (SNUF)
Work with Document Libraries
Edit Library List
Change Password
Copy Library
Clear Message Queue
Check Password
Work with Objects by Owner
Work with Tables
Hold Distribution Queue
Release Distribution Queue
Work with Alert Descriptions
Change Alert Description
Remove Alert Description
Add Alert Description
Create Alert Table
Delete Alert Table
Work with Alert Table
Change Alert Table
Change Prestart Job
Print Error Log
Overridden program device
CL var for RTNLIB (10)
File member
Current owner authority
Overriding to ICF file
Application identification
Batch activity
Message protection
Host subsystem type
Header processing
CL var for SNDMSGFLIB (10)
Switch type
Command line
Display function keys
User data length
CL var for OBJATR (10)
Owned object option
Log problem
CL var for ASP (2 0)
Owned object value
Allow delete operation
Allow update operation
User label program
Resource name VPD
Resource name
Switch setting
Port number
User profile name if *CHGOWN
Current library
Product library
Start jobs
CL var for INLMNU (10)
CL var for INLMNULIB (10)
Initial number of jobs
CL var for CURLIB (10)
Threshold
Additional number of jobs
Initial menu
Maximum number of jobs
ICF communication file
Hardware justification
User data
Print sequence
Maximum number of uses
Query
Query file
Report output type
Output form
Separator drawer
Record selection
Wait for job
Program attribute
Number of jobs to use class
(*ALL *CHANGE *USE *EXCLUDE)
Address
User description
Indirect user
Address line 1
Address line 2
Add to system directory
Address line 3
Address line 4
Chart format
Telephone number 1
Telephone number 2
List description
From list identifier
Target release
Form definition
Complete pended requests
CL var for CRTDATE (13)
CL var for CHGDATE (13)
Display sign-on information
Set password to expired
Source device
Output device
Action
PTF identifier
Information to be sent
Recipient
Password expiration interval
Limit device sessions
CL var for DSPSGNINF (7)
System
File position
Folder
Document identifier
CL var for PWDEXPITV (5 0)
Document type
Document system code
Personal
Priority
Confirmation of delivery
Author
Document class
Keyword
Subject
File cabinet location
Copy list
Reference
Create Ctl Desc (Local WS)
Create Ctl Desc (Remote WS)
Auto-configuration controller
Create Ctl Desc (BSC)
Station address
APPN-capable
Create Ctl Desc (SNA Host)
Switched disconnect
SDLC poll priority
SDLC poll limit
Physical interface
Modem type supported
Dial command type
Autocall resource name
SYN characters
Error threshold level
SDLC connect poll retry
SDLC NRM poll timer
SDLC NDM poll timer
User facilities
LAN remote adapter address
LAN DSAP
TRLAN frame retry
TRLAN connection retry
TRLAN response timer
TRLAN connection timer
Include STX character in LRC
Receive timer
Transmit timer
Continue timer
Contention state retry
Data state retry
TRLAN acknowledgment timer
TRLAN inactivity timer
TRLAN ack frequency
X.25 network level
X.25 logical channel ID
APPN CP session support
Remote APPN node type
X.25 frame retry
X.25 connection retry
X.25 response timer
Transmit TTD or WACK retry
Receive TTD or WACK retry
Create Mode Description
Class-of-service
Display Mode Description
X.25 connection timer
X.25 acknowledgement timer
X.25 inactivity timer
LAN SSAP
Create Ctl Desc (Finance)
Remote network identifier
Remote control point
Data link role
APPN transmission group number
Create Ctl Desc (APPC)
X.25 delayed connection timer
Change Configuration List
Change Class-of-Service Desc
Change Ctl Desc (APPC)
Change Ctl Desc (Async)
Change Ctl Desc (BSC)
Maximum controllers
Maximum frame size
TRLAN manager logging level
Local adapter address
SSAP list
Source service access point
Create Line Desc (Token-Ring)
Change Ctl Desc (Finance)
Change Ctl Desc (SNA Host)
Change Ctl Desc (Virtual WS)
Change Ctl Desc (Local WS)
Change Ctl Desc (Remote WS)
Change Device Desc (APPC)
Default packet size
Default window size
Change Device Desc (Diskette)
Change Device Desc (Display)
Change Remote Display Dev Desc
00-FF, *SAME
00-99, *SAME, *NONE
Change Device Desc (Printer)
Change Remote Printer Dev Desc
00-99
Change Device Desc (Tape)
Change Line Desc (Async)
Change Line Desc (BSC)
Change Line Desc (SDLC)
Change Line Desc (Token-Ring)
Change Line Desc (X.25)
Change Mode Description
Copy Configuration List
Create Line Desc (SDLC)
Connect poll retry
NRM poll timer
NDM poll timer
Modulus
Maximum outstanding frames
Inactivity timer
Poll response delay
Idle timer
Connect poll timer
3-600 in 0.1 second intervals
Mode description
Poll cycle pause
Duplex
Create Ctl Desc (Virtual WS)
Create Device Desc (APPC)
Create Ctl Desc (Async)
Disconnect timer
File transfer ack timer
File transfer retry
APPN-capable
Single session
Create Class-of-Service Desc
Delete Configuration List
Delete Class-of-Service Desc
Delete Mode Description
Display Configuration List
Display Class-of-Service Desc
Create Line Desc (X.25)
Locally controlled session
Pre-established session
0-65535 seconds
0-100 (0.1 seconds)
*CALC, 0-3000 (0.1 seconds)
2-600 seconds
16-65535 seconds
Connection initiation
Insert net address in packets
X.25 DCE support
0-2550 (0.1 seconds)
0-254 (0.1 seconds)
TRLAN access priority
Create Configuration List
Configuration list type
Data bits per character
Type of parity
Stop bits
Echo support
Flow control
XON character
XOFF character
End-of-Record table
End-of-Record character
Trailing characters
Create Line Desc (Async)
Link speed
APPN local location entry
APPN remote location entry
Configuration list
Async network address entry
Async remote location entry
Remote location identifier
Controller model
Network address
Cost/connect time
Cost/byte
Security for line
Propagation delay
User-defined 1
User-defined 2
User-defined 3
Create Line Desc (TDLC)
Row 5 for lines
Row 5 for nodes
Row 6 for lines
Row 6 for nodes
Row 7 for lines
Row 7 for nodes
Row 8 for lines
Row 8 for nodes
Add Configuration List Entries
Remove Cfg List Entries
Change Line Desc (TDLC)
Change Device Desc (Async)
Change Device Desc (BSC)
From configuration list
001-FFF
Change Device Desc (SNA Host)
Change Device Desc (SNUF)
Entry 'description'
Work with Line Descriptions
Work with Ctl Descriptions
Work with Device Descriptions
Work with Mode Descriptions
Work with COS Descriptions
Work with Configuration Lists
Work with Configuration Status
Configuration description
Redial delay
Dial retry
Predial delay
Remote autoanswer
Autocall unit
Connect timer
Short timer
Long timer
Short retry
Long retry
0-255 (0.1 seconds)
0-254 (0.5 seconds)
*CALC, 1-32767 (0.1 seconds)
Maximum source sessions
Remote job entry
Local LU
System validation password
Secure LU
Speed rate type
Error retries
BSC switched line disconnect
X.25 maximum PIU size
Logical channel group number
Logical channel channel nbr
Maximum length PIU
Create Line Description
Line type
S/38 provided clock
Autocall feature
X.25 network type
Print Device Addresses
Auxiliary printer
TRLAN max outstanding frames
1-2550 (0.1 seconds)
Create Device Desc (Intra)
Change Device Desc (Intra)
Vary on wait
*NOWAIT, 15-180 seconds
*CFGOBJ, *NOWAIT, 15-180 (sec)
Create Ctl Desc (Tape)
Class-of-service description
Transmission priority
Row 1 for lines
Row 1 for nodes
Row 2 for lines
Row 2 for nodes
Row 3 for lines
Row 3 for nodes
Row 4 for lines
Row 4 for nodes
Line row weight
Minimum link speed
Maximum link speed
Minimum cost/connect time
Maximum cost/connect time
Minimum cost/byte
Maximum cost/byte
Minimum security for line
Maximum security for line
Minimum propagation delay
Maximum propagation delay
Minimum user-defined 1
Maximum user-defined 1
Minimum user-defined 2
Maximum user-defined 2
Minimum user-defined 3
Maximum user-defined 3
Node row weight
Min route addition resistance
Max route addition resistance
Minimum congestion for node
Maximum congestion for node
0-254 (0.5 seconds)
*NOMAX, 150-4200 (0.1 sec)
30-254 (0.1 seconds)
16-24 (0.1 seconds)
*NOMAX, 1-32767 (0.1 seconds)
10-600 (0.1 seconds)
100-6000 (0.1 seconds)
0-2048 (0.0001 seconds)
160-4200 (0.1 seconds)
5-300 (0.1 seconds)
2-300 (0.1 seconds)
0-2048 (0.0001 seconds)
Physical attachment
Word length
Number of drawers
Language type
Change Ctl Desc (Tape)
Retrieve Configuration Status
CL variable for status code
Calling number
Emulating ASCII device
Emulated twinaxial device
Retrieve Configuration Source
Retrieve option
Member option
Clocking
Advanced function printing
AFP attachment
Maximum pending requests
Print request timer
Form definition
Create Device Desc (Retail)
Pacing value
Rmt change management server
Change Device Desc (Retail)
CL var for PWDEXP (4)
CL var for LMTDEVSSN (7)
Connection response timer
Create Device Desc (Network)
Change Device Desc (Network)
Type
Resource names
SHM node type
SHM call format
SHM access code
Call progress signal retry
Short hold mode
SHM disconnect limit
SHM disconnect timer
Create Ctl Desc (Retail)
Change Ctl Desc (Retail)
SHM call timer
Create Ctl Desc (Network)
Change Ctl Desc (Network)
Attached line
2-3000 (0.1 seconds)
*NONE, 1-60 (minutes)
Recovery limits
Count limit
Time interval
0-120 minutes
Retail device
SNUF device
Default host program
Retail pass-through entry
1-3600 (seconds)
Network controller
2-100 (0.1 seconds)
10-250 (0.1 seconds)
NRM poll timer
Asynchronous vary off
Group address
LAN frame retry
LAN connection retry
LAN response timer
LAN connection timer
LAN acknowledgement timer
LAN inactivity timer
LAN acknowledgement frequency
LAN max outstanding frames
LAN access priority
SSAP maximum frame
Create Line Desc (Ethernet)
Display Connection Status
Change Line Desc (Ethernet)
Finance Pass-through Entry
HCP emulation
LAN window step
Control point net ID
Ethernet standard
Early token release
Finance device
Token-ring inform of beacon
Log configuration changes
TRLAN manager mode
Pacing
Model controller description
Connection network ID
Connection network CP
Fair polling timer
Autocreate controller
Autodelete controller
1-10000 (minutes), *NONE
1-10000 (minutes), *NONE...
Control owner
5-60 (1 second)
Recontact on vary off
X.25 switched line selection
Network user information
Character code
Network user ID
Call immediate
Disconnect timers
Minimum connect timer
Disconnection delay timer
Number of conversations
Single session capable
Delete Network Interface Desc
Create Connection List
Connection list
Characters to remove
Delete Connection List
Work with CNNL Entries
Change Connection List
Display Network Interface Desc
Network interface description
New entry
Host signon/logon command
Remove Connection List Entry
Network type
Local number
Local number type
Local numbering plan
Local subaddress
Local subaddress type
Terminal endpoint identifier
Maximum message size
Channel entries
Work with Network Interfaces
Message encoding differences
Call Proceeding differences
Release Complete differences
Setup differences
Work with Connection Lists
Called address differences
Cause code IE differences
Procedural differences
Compatibility differences
Service differences
Change Network Interface ISDN
Cause code entries
Alert/Connect timer (T301)
Setup/Ack timer (T303)
Call Proceeding timer (T310)
Dsc/Release timer (T305)
Release Complete timer (T308)
Dsc/reconnect timer (T309)
Connect/Ack timer (T313)
TE ID request retry (N202)
TE ID request timer (T202)
Active switched line
Connect retry
Activation timer
Activation retry
Activation retry timer
Reactivation timer
10-100 (0.1 seconds)
Channel connection
Code error detected by NT
CRC errors received
Receive overrun
Transmit underrun
Create Network Interface ISDN
Channel number
Current logging level
Information transfer type
CCITT cause code
Network cause code
Frame aborts
Retransmitted frames
Frame sequence errors
Loss of frame alignment
Incoming system access errors
Outgoing system access errors
Code error detected by TE
Display Connection List
Create Line Desc (IDLC)
NWI connection type
Attached nonswitched NWI
NWI channel type
NWI channel number
Switched NWI list
NWI description
NWI channel type
NWI channel number
Incoming connection list
Attached nonswitch controller
Default window size
Frame retry
Response timer
Connect retry count
APPN minimum switched status
Add Connection List Entry
Entry
Remote number
Rename Connection List Entry
Remote number type
Remote numbering plan
Remote subaddress
Remote subaddress type
Connection type
Transit network selection
Network identifier
Network type
Network plan
Action due date
Document status
Completion date
Project
Print on both sides
Delete status
Distribution identifier
Type of data for output
Acknowledge receipt
Time separator
Set identifier
Authorization list
Allow replacement
Configuration object
Type
Range
Page size
Authority
Local location
Remote location name
Reset
From object
Local location address
Attached controller
Mail
Separator character
Remote BSCEL
CL var for CURUSER (10)
CL var for SUBTYPE (1)
Contention resolution winner
Alert table
Product identifier
Licensed program text
Emulated device
Emulated keyboard
Emulated numeric lock
Emulation work station
(*USE *CHANGE *ALL *EXCLUDE)
Printer error message
Display input
Controlling keyword
Controlling conditions
Number of true conditions
IBM system command
Controlling keyword value
Display print options
Dump Document Library Object
Name, *SYSOBJNAM, *INT
Overlay
Country or region ID
Coded character set ID
Include SQL packages
Alert backup focal point
Alert focal point to request
User class
Special environment
Alert default focal point
Document list
Attention program
Menu
User options
CL var for PRVSIGN (13)
CL var for NOTVLDSIGN (11 0)
Panel group
Time interval (in minutes)
Stops data collection
Days from current day
Hour
Minutes
Additional interactive jobs
Dump the trace
Local response time
Boundary 1
Boundary 2
Boundary 3
Boundary 4
Help panel group
Help identifier
Choice text
Choice program
Prompt control
Prompt control program
PAD Emulation
Remote verify
Page segment
Cursor Select key
Program start request capable
Application identifier
Host type
Command character identifier
Distribution ID extension
Keep in mail log
Document member
Document character identifier
Comment
Parameters
Document description
Document date
Font resource
Object attribute
Source file member
Command environment
Information to be filed
Document file
Exit code
Alert description code point
Probable cause code point
Buffer
Access code
Cause
Cause type
Cause code point
Detail data ID 1
Remote location
Communication type
New library
Existing library
Create library
Detail data 1
Detail data ID 2
Detail data 2
Alert primary focal point
CL var for PRTDEV (10)
CL var for USRCLS (10)
CL var for LMTCPB (10)
CL var for SPCENV (10)
CL var for USROPT (240)
CL var for DLVRY (10)
Allow object differences
CL var for ATNPGM (10)
CL var for ATNPGMLIB (10)
Detail data ID 3
Detail data 3
Recommended action
Action type
Emulation device, or
Emulation location
Incoming translation table
Outgoing translation table
Emulation controller, or
Action code point
Defer printing spool output
Print positions per line
Lines per page
Display device, batch only
Timeout wait for host
Numeric lock keyboard
Keyboard language type
Page Down (Roll Up) key
Page Up (Roll Down) key
Test Request key
Library list position
Data format
Language character set
Handle nulls
Timeout wait eject
Spool output
Duplicate key check
Reference library
Client request access
Local network ID
Local control point name
Default local location name
Default mode
Maximum conversations
Node type
Maximum intermediate sessions
Route addition resistance
Network node servers
Control point name
Format message text
CL var for ALRCTLD (10)
CL var for ALRPRIFP (10)
CL var for ALRDFTFP (10)
CL var for ALRLOGSTS (7)
CL var for PCSACC (10)
CL var for PCSACCLIB (10)
CL var for LCLNETID (8)
CL var for PNDNETID (7)
CL var for LCLCPNAME (8)
CL var for PNDCPNAME (8)
CL var for LCLLOCNAME (8)
CL var for DFTMODE (8)
CL var for MAXLOCCNV (5 0)
CL var for NODETYPE (8)
CL var for PNDNDTYPE (8)
CL var for MAXINTSSN (5 0)
CL var for RAR (5 0)
CL var for NETSERVER (85)
Display type
Limit capabilities
Return point
From device
To device
Password
Job trace interval
Job types
.1 - 9.9 seconds
Time slice end pool
Device recovery action
Status message
Display model
Distribution
Alert logging status
CL var for SYSNAME (8)
CL var for PNDSYSNAME (8)
Join operator
Queue
Select files for
Display format
User data
Menu type
Include file
Input source
Replace database
Load supplied database
User identifier
Incoming or outgoing
Controlled publication
Remote capable
Single-byte character set ID
To document
To folder
Profile file
Profile member
Single-byte code-page ID
In folder
Message
System code
Print query definition
Output file
Double-byte character set ID
Form length
Form width
Allow limited users
Double-byte code-page ID
Long Message
CL var for *ALL (10)
CL var for *CHANGE (10)
CL var for *USE (10)
CL var for *EXCLUDE (10)
CL var for *OBJEXIST (10)
CL var for *OBJMGT (10)
CL var for *OBJOPR (10)
CL var for *READ (10)
CL var for *ADD (10)
CL var for *UPD (10)
CL var for *DLT (10)
CL var for *AUTLMGT (10)
Status type
Days
S/36 source member
Telephone
S/36 procedure member
MRT procedure
Log OCL statements
Contains program data
Reference number
MRT delay
Maximum MRT's
Never-ending program
Maximum devices
Logical record length
S/36 program
Language identifier
System object name
Document library object
User authority
Authority level
Connect code
CL var for SAVDATE (13)
CL var for RSTDATE (13)
Reference DLO
Reference folder
Reference system object
Extend
Check file
CL var for STG (10)
CL var for SIZE (15 0)
CL var for SAVSIZE (15 0)
File becomes available
Output priority
CL var for SAVCMD (10)
Volume
Queue for writer messages
Auto-end options
Automatically end writer
If yes, when to end
When to change writer
Status of user jobs
Lib containing Q/A database
Q/A database
Data dictionary
Definition
Definition type
File information
Record format information
Field information
File definition
Source type
New folder
Ignore decimal data errors
Replace document
From document
From folder
Creation period
Owner profile
New document library object
Logical device
Error log identifier
Print format
Volume type
CL var for SAVVOL (71)
Date format
Date separator
CL var for SAVDEV (10)
CL var for SAVF (10)
Allow display by WRKSBMJOB
When to end reader
Show on submitted job list
SNA DBCS 3270PC emulation
Emulation printer device
CL var for ENDSTS (1)
CL var for SAVFLIB (10)
CL var for LOGPRB (1)
Days of problem logs
CL var for SAVLABEL (17)
CL var for SRCF (10)
Line VPD
Controller VPD
Device VPD
Display option
Period
Alert type
Alert resource type
Start time
Start date
End time
End date
Start time and date
End time and date
Text
CL var for SRCFLIB (10)
CL var for SRCMBR (10)
From library
S/36 source members
Retention period
CL var for SRCDATE (13)
S/36 object members
Date differentiated file
Mark for offline
Check out
CL var for SYSLVL (9)
CL var for COMPILER (16)
Add or remove access code
Offline type
User profile
CL var for OBJLVL (8)
New author
New keyword
New subject
New copy list
CL var for USRCHG (1)
CL var for LICPGM (16)
User authority
Mark for offline
CL var for PTF (10)
CL var for APAR (10)
CL var for SAVSEQNBR (4 0)
REXX source member
REXX source file
Licensed program VPD
REXX command environment
Microcode program
Size
Document library object, or
REXX exit programs
Starting library
Host connection information
Document list
IGC character identifier
Time limit
Selection limit
Query definition
Order by
Rename
Start query
Search criteria
Profile
Logical operator
Selection order
Command to run
Type of information
Session type
Nodes
Max active priority 1
Max active priority 2
Max active priority 3
Max active priority 4
Max active priority 5
Max active priority 6
Max active priority 7
Max active priority 8
Max active priority 9
Plan
CL var for ALROPT (9)
Alert options
Phase
Release Remote Phase
System object attributes
Label
Clear
Check for mark
Last changed date
Last changed time
Current status value
New status value
Print document error log
Delete document
Flagging severity level
Entry format
Type of object
Level of list
Identifier, *NONE
Form type, *ALL, *STD, *FORMS
Form type, *ALL, *STD
User data, *ALL
User data, *SAME
Identifier, *SAME, *NONE
Form type, *SAME, *STD
Form type, *SAME, *ALL...
Lower value
Upper value
Detail
Delayed PTFs
Apply on unattended IPL
Optional part to be deleted
Language for licensed program
Help text label
Replace program
Load Program Temporary Fix
Apply Program Temporary Fix
Remove Program Temporary Fix
Display Program Temporary Fix
PTF numbers to select
PTF numbers to omit
Remove on unattended IPL
Run priority
Target location
Source location
Call level
Recursion level
Authority to check
Saved folder
Milliseconds, *SAME, *NOMAX
New object name
Restore into folder
System group
Print private mail
Description
Controller
Server network ID
Alert controller description
System library list
Name, *SYSOBJNAM
Name, *FROMDOC
Name, *SEARCH, *ALL...
Name, *SYSOBJNAM, *INT, *ALL
Type of object to be restored
Name, *ALL, *SYSOBJNAM
Name, *NONE, *REFSYSOBJ
Name, *PRV
Name, *PRV, *ALL
Wait time
Seconds, *CLS
Milliseconds, *SAME
Seconds, *SAME, *NOMAX
Seconds
Milliseconds
Seconds, *NOMAX
Seconds, *MAX
Milliseconds, *NOMAX
Kilobytes, *NOMAX
Seconds, *NONE
Seconds, *NOLIMIT
Controlled end delay time
Terminate CPF
Terminate Subsystem
.1-999.9 seconds, *NONE
Display Object Authority
APPC device
Start Communications Server
End Communications Server
Number of servers
Save Security Data
End Prestart Jobs
Start Prestart Jobs
Change Distribution
Create Font Resource
Work with Font Resources
Work with Form Definitions
Work with Overlays
Work with Page Segments
Delete Font Resource
Start Font Management Aid
Create Form Definition
Delete Form Definition
Create Overlay
Change Profile
Verify Communications
Work with Product Information
Work with Contact Information
Work with Files
Work with Authorization Lists
Work with Job Descriptions
Work with Libraries
Work with Menus
Work with Message Queues
Work with Commands
Work with Subsystem Desc
Work with User Profiles
Work with Sphere of Control
Display Sphere of Control Sts
Remote user ID
Remote password
Run Remote Command
Echo
Verify APPC Connection
Number of iterations
Start 3270 Display Emulation
End Printer Emulation
Start System Service Tools
Analyze Problem
Select Command
Delete Overlay
Create Page Segment
Delete Page Segment
Display Active Prestart Jobs
Start REXX Procedure
Change Contact Information
Contact
Contact telephone numbers
Primary
Alternative
Fax telephone numbers
Trace REXX
Add REXX Buffer
Remove REXX Buffer
Check Document Library Object
Disconnect Job
Convert Performance Data
Work with Objects
Target Release
Add Sphere of Control Entry
Delete Alert
Mailing address
Street address line 1
City and state
Country or region
Postal code
National language version
Display Problems
Save Storage
Work with Order Information
Display Local Hardware
Display Software Resources
Work with DDM Files
Display DDM File
Initialize System
Start Remote Support
End Remote Support
Media for PTFs
Add Contact Information
Change IBM Service Tools Pwd
Display System Status
Remove Sphere of Control Entry
Start Programmer Menu
Change Menu
Delete Menu
Go to Menu
Display REXX Profile
Display Menu Attributes
Create Menu
Software
Work with Directory
Work with Distribution Lists
Display Distribution List
Create Authorization List
Delete Authorization List
Remove Auth List Entry
Add Authorization List Entry
Change Auth List Entry
Retrieve Auth List Entry
Delete Problem
Edit S/36 Source Attributes
Change S/36 Proc Attributes
Edit S/36 Procedure Attributes
Change S/36 Source Attributes
Change S/36 Program Attributes
Edit S/36 Program Attributes
Display DLO Authority
Add DLO Authority
Remove DLO Authority
Change DLO Authority
Work with User Jobs
Start Question and Answer
Ask Question
Work with Questions
Answer Questions
Edit Questions and Answers
Delete Questions and Answers
Create Q/A Database
Change Q/A Database
Delete Q/A Database
Create Q/A Database Load
Load Q/A Database
Start IDDU
Work with Data Dictionaries
Work with Data Definitions
Work with DB Files using IDDU
Display Data Dictionary
Link/Unlink Data Definition
Add Data Definition
Delete Data Dictionary
Create Data Dictionary
Work with Spooled Files
Convert CL Source
Restore S/36 Folder
Delete Authority Holder
Create Authority Holder
Display Authority Holder
Change DLO Owner
Change Document Description
Copy Document
Create Folder
Delete Document Library Object
Convert Education
Display APPN Information
Display Authorization List
Display Authorization List Obj
Display Folder
Display User Permission
Retrieve REXX Profile
Edit Authorization List
End TIE Session
Grant User Permission
Query Document Library
Query TIE Files
Receive TIE File
Rename Document Library Object
Replace Document
Restore Document Lib Object
Restore S/36 File
Restore S/36 Library Members
Retrieve Document
Revoke User Permission
Save Document Library Object
Save S/36 File
Save S/36 Library Members
Send DBCS 3270PC Eml Code
Send TIE File
Work with TIE
Start ITF
Start TIE Session
Work with Alerts
Work with Document Print Queue
Work with Hardware Products
Work with Message Descriptions
Reclaim Document Lib Object
Check Record Locks
Edit DLO Authority
Display Authorization List DLO
Display Help Document
Cancel Job
Copy From Query File
Start Education
Save Licensed Program
Delete Licensed Program
Restore Configuration
Work with Reply List Entries
Start Support Network
Display Job
Copy Program Temporary Fix
Delete Search Index
Start Index Search
Set Object Access
Work with System Value
Change Shared Storage Pool
Work with Query Mgmt Queries
Work with Query Mgmt Forms
Create Comm Side Information
Reclaim Spool Storage
Clear Pool
Remove LAN Adapter
Work with Service Providers
Work with Hardware Resources
Edit Device Resource
Work with Shared Storage Pools
Add Performance Collection
Change Performance Collection
Delete User Space
Delete User Index
Delete User Queue
Work with Pfr Collection
File type
Type of contents of file
Node
Password
Account
Save file library
Kilobytes, *SAME, *NOMAX
To data dictionary
1-32767 seconds, *NOMAX
1-99 minutes, *NONE
Remove observable info
Optional part to be saved
Optional part to be restored
Logical relation
From save file
From tape sequence number
From tape device end option
To tape sequence number
To tape device end option
To save file
CL var for PRTDEV (10)
CL var for RUNPTY (2 0)
Destination application
*CURRENT, *BEGIN, *BYPASS...
1-12, *NORMAL
Name, *DOCID
Name, *NONE
CL var for SYSLIBL (165)
VM/MVS class
Start database monitor
Name, *ALL, *SEARCH...
Name, *ALL, *SYSOBJNAM...
Name, *SAME
Search index
Alert resource
Name, *FROMFLR
Location
Spool file name
Emulation controller
Edit Text
Allow use of ".exc"
Copy PTF cover letter
Superseded PTFs
*JOB, 1-9
IPL apply options
Apply at unattended IPL
Prerequisite lic int code
CL var for STGUSED (15 0)
From file type
To file type
Replaced message file
Message IDs to select
Message IDs to omit
Verify Link supporting LPDA-2
Test
Local DCE address
Remote DCE address
Number of sequences
Remote DTE port
DTE retry
DCE retry
Link status after test
Serial number
Program identifier
Release
Modification level
Function
Origin
Service number
Hardware
Network identifier
Problem identifier
REXX user profile
Command environment
Course ID
Language ID
Last name
First name
Middle name
Preferred name
Full name
Department
Job title
Company
Building
Office
Internal address line 1
Internal address line 2
Internal address line 3
Internal address line 4
External address line 1
External address line 2
External address line 3
External address line 4
File group qualifier
Replace command
Prompt override program
Key parameter
Change Comm Side Information
Display Comm Side Information
Reorganize Document Lib Object
Start Communications Trace
End Communications Trace
Delete Communications Trace
Check Communications Trace
Print Communications Trace
End Network Interface Recovery
Start Trace
End Trace
Print trace data
Print Trace Data
Delete trace
Delete Trace
Resume NWI Recovery
Duplicate Tape
Delete Comm Side Information
Work Comm Side Information
Create Search Index
Change Search Index
Add Search Index Entry
Remove Search Index Entry
Work Search Index Entry
Display Library Description
Retrieve Library Description
Add RDB Directory Entry
Change RDB Directory Entry
Remote authentication method
Remove RDB Directory Entry
Display RDB Directory Entries
Relational database alias
Work with RDB Directory Entry
Retrieve RDB Directory Entry
Create Page Definition
Delete Page Definition
Work with Page Definitions
Transfer Pass-Through
Display Hardware Resources
Start Search Index
Change Problem
Display Hierarchical File Sys.
End RDB Request
Work with Messages
Compress Object
Decompress Object
Reclaim Temporary Storage
Add Distribution Queue
Change Distribution Queue
Remove Distribution Queue
Add Distribution Route
Change Distribution Route
Remove Distribution Route
Add Secondary System Name
Remove Secondary System Name
Change Directory Attributes
Work with Dir Shadow Systems
Add Directory Shadow System
Change Directory Shadow System
Remove Directory Shadow System
Copy From Directory
Start Directory Shadowing
End Directory Shadowing
Work with Directory Locations
Load and Run
Allow blank in network user ID
Display network user ID
Delete Module
Display Module
Save APAR Data
Delete APAR Data
PTF description
Create Binding Directory
Delete Binding Directory
Remove Binding Directory Entry
Work with Binding Directories
Work with Binding Dir Entries
Add Binding Directory Entry
Display Binding Directory
Change Module
Force module recreation
Change Object Auditing
Object auditing value
Sort sequence
Change Remote Definition
Work with Remote Definitions
Calendar data stream
Remote user authority
Change User Auditing
User action auditing
CL var for OBJAUD (10)
CL var for AUDLVL (640)
Duplicate job option
Change S/36 Environment Attr
Retrieve S/36 Environment Attr
Optimize module
FAX telephone number
Name, *SYSOBJNAM, *ROOT
Name, *ALL, *SYSOBJNAM, *ROOT
Remove unhandled exception
Node list
SNA node name
Create Node List
Delete Node List
Work with Node List
Add Node List Entry
Remove Node List Entry
Work with Node List Entries
CL var for SRTSEQ (10)
CL var for SRTSEQLIB (10)
CL var for LANGID (3)
CL var for CNTRYID (2)
Enhanced display
Change Service Program
Content importance
Sensitivity
Recipient type
Reply requested
Time
Allow alternate recipient
Allow X.400 conversion
Disclose recipient
Authorizing user
Initialize Distribution Queue
Clear queue entries
Activation group attribute
Activation group duration
Data compression
Intermediate data compression
CL var for DTACPR (10 0)
CL var for DTACPRINM (10 0)
Supplier program
Display Service Program
Allow direct print
Reclaim Activation Group
End connection
Exclude LMI data
Format LMI data only
DDI trace options
Remote controller
Remote MAC address
Remote SAP
Local SAP
IP protocol number
Remote IP address
LMI trace options
Communications trace options
Attached devices
Attached controllers
Omit trace points
Select trace points
Trace point qualifier
Open scope
Override scope
Distribution expiry indicator
Keep recipients
Export source file
Export source member
Change Service Program
Optimize service program
Force recreation
Complete System/36 Migration
System/36 Cobol Migration
System/36 Display File Migrate
System/36 Library Migration
System/36 Menu Migration
System/36 Message File Migrate
System/36 RPG II Migration
Migration Menu
System/36 Command Selection
System/36 User ID Migration
System/36 Query Migration
System/36 DFU Migration
System/36 OCL Analysis
Check S/36 Source Attributes
System/36 APF Migration
Object type to migrate
Restore device
Restore in batch
Program
Library
Source file
Source member
Display file
SFGR source file
SFGR source member
Menu name
Menu source file
Message file
Message source file
Member type
Process in batch
Query name
S/36 query definition file
System/36 files library
DFU program name
DFU library
Date differentiated files
Job queue
OCL source file
Source type
APF file
Name, QS36PRC
Name, *LIBL
Name, QS36SRC
*BLANK, *ALL, CBL36 .....
Name
Name, *PGMID, *SRCMBR
Name, *CURLIB
Name, *ALL
Name, *DSPFILE
Name, *JOBD
Name, QS36SBR
Name, *CTLSPEC, *SRCMBR
DKT01, TAP01 ....
*YES, *NO
*ALL, *LIB, *FILE, *FLR
Print Migration Documentation
Format LCP data
Output device
Output file
Name, *SAME
Number of copies
Delay printing
Error log form type
Print separator page
Large print
Automatic page binding
Merge type
Data document
Data folder
Data file
Data member
Multiple line report
Adjust line endings
Adjust page endings
Allow widow lines
Print change symbols
Change symbols to print
Draft spacing
Print line numbers
Resolve instructions
Additional spaces to left
Save resolved output
Resolved output document
Resolved output folder
Send completion message
Cancel on error
Start page
End page
Number of labels across page
Width of labels
Sheet feed labels
Number of rows per sheet
Adjustment option
Place on job queue
Allow variable length fields
Allow field value of null
CL var for RTNSYSTEM (4)
CL var for RTNLIB (10)
CL var for RTNMBR (10)
CL var for FILEATR (3)
CL var for FILETYPE (5)
CL var for SRCTYPE (10)
CL var for SRCCHGDATE (13)
CL var for CRTDATE (13)
CL var for EXPDATE (7)
CL var for TEXT (50)
CL var for NBRCURRCD (10 0)
CL var for NBRDLTRCD (10 0)
CL var for SHARE (4)
CL var for DTASPCSIZ (15 0)
CL var for ACCPTHSIZ (12 0)
CL var for CHGDATE (13)
CL var for SAVDATE (13)
CL var for RSTDATE (13)
CL var for NBRDTAMBRS (2 0)
Reference member
Relationship
Retrieve Member Description
Display Trademarks
CL var for SRCFILE (20)
CL var for CMDENV (20)
CL var for EXITPGM (250)
Analysis type
Network ID
Type of system value
Replace file
Subsystem library
IPL source
Side information
End session with host
Form
CL var for TIMSEP (1)
CL var for TSEPOOL (10)
CL var for DEVRCYACN (13)
CL var for STSMSG (7)
Work with License Information
Begin PC Support/38 Services
Application
Exit program
Copy To Virtual Disk
Create Virtual Disk
Convert To Virtual Disk
Copy From Virtual Disk
PC file
5-32765 K
Directories
Virtual diskette
Virtual disk
Virtual disk size
Name, *FROMMBR
CL var for LANGID (10)
CL var for CNTRYID (10)
CL var for CCSID (5 0)
CL var for ALRHLDCNT (5 0)
Control point
Stop trace points
Outfile format
Page range to print
Starting page
Ending page
Transaction program
Owner address
Entry
Use adopted authority
Alert hold count
Search type
IP port number
Enter PS/38
Initial option
Enter Admin Management
Initial option
PC model
PC address
PC LAN address
Use automatic configuration
Line text
Controller text
Vary on line
Vary on line and controller
Vary on controller and device
Text
Add a PC
Switched line
Nonswitched line
Controller
Attachment type
Enable query response
Use existing controller
Work with S/36 Configuration
Work with S/36 Program Attr
Work with S/36 Procedure Attr
Work with S/36 Source Attr
PTF parts
Order
Reorder
Delivery method
Restart printing
Days
CL var for CRTUSER (10)
CL var for CRTSYSTEM (8)
CL var for USEUPD (1)
CL var for USEDATE (7)
CL var for USECOUNT (5 0)
CL var for RESETDATE (7)
Adapter
Adapter address
Days used count
From open file identifier
Verification type
HHMM
Performance collection
Collection start time
Days from start day
Collection days
Create Print Descriptor Group
Delete Print Descriptor Group
Change PDG Profile
Display PDG Profile
Retrieve PDG Profile
Print descriptor group
Print descriptor
CL var for RTNUSER
CL var for PDG
CL var for PDGLIB
CL var for PRTD
When to hold file
User index
User queue
Save file data
Image option
Work with PTF Order
Delivery format
From record
Days since last referenced
Reorganize unfiled mail
Check PTF
Image directory
Image prefix
User space
CL var for OBJDMN (2)
Country or region ID
Trace CSP/AE Application
Start CSP/AE Utilities
Print CSP/AE Application
Trace list
Work with Objects for CSP/AE
Create CSP/AE Application Obj
To DDS source file
Replace DDS
SQL
Create CSP/AE User Msg File
Delete CSP/AE Map Group
Delete CSP/AE Table
Create CSP/AE SQL Access Plan
Display CSP/AE Object
Search library
Replace messages
Replace
From end option