OS/400 Messages

Are you looking for the description of OS/400 (System i) messages e.g. CPF9801? Then you have come to the right place. Below you can see a (hoefully) complete list of of all OS/400 messages with all “second level texts”.

Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43


Complete OS/400 Messages Documentation From BAS6702 up to CCA0113

Complete OS/400 Messages Documentation From BAS6702 up to CCA0113

This documentation is copyright by IBM.
Count: 2810 Skipped: 0
OS/400 Messages
Description
Attempt to return from a function which was not called
Attempt to call a function recursively
Letter already reserved by previous letter range
Attempt to change variable type during program run
Variable already declared
DDS field &1 format &2 invalid in BASIC
&1 field name, format &2, is now &1Å
DDS field &1 format &2 invalid for numeric field
More than one DECLARE FILE statement for the same file reference
Invalid file reference number for externally described I/O
Undeclared file referenced in I/O statement
Program name already defined
CALL statement has too many arguments
CALL statement has too few arguments
Invalid argument conversion in CALL statement
SUB statement allowed only in compiled programs.
SUB statement must be first statement in compiled program
SUB statement has too many parameters
SUB statement has too few parameters
Conversion of arrays on SUB statement not allowed
Automatic ENTER processed for GO* in batch
SUB not allowed on END statement
Mismatch of parameters on SUB and DECLARE PROGRAM statements
Too many fields in DDS format &1
File in DECLARE FILE statement not found or not available
DDS format &1 not found
Line &1, statement &2 does not exist
Entry into user-defined function at line &1/&2 invalid
CONTINUE or RETRY out of function on line &1/&2 invalid
ON condition GOTO line &1, statement &2 refers to statement which no longer exists
DTAARA must be specified if NAME=*LDA
MBR= not allowed with PRINTER, WS, or DTAARA
NEW not allowed without MBR
FORMAT not allowed in OPEN statement
Received &1: &3
SHARE(*YES) not allowed on override to file used by BASIC
Member cannot be freed
Program &1 in library &2 not found
Invalid operand found
Invalid operand found, cannot continue
Invalid DDS binary field &1 format &2
Cannot change length of variable for field &1
Character field &1 format &2 longer than 255
Message file not found or not specified by prior MSGÅ
Variable not allowed in compiled FORM statement
CHAIN and USE statements not allowed in compiled programs
Invalid characters in output indicator string
CUR and SKIP invalid in FORM for record I/O operation
Data portion of record length is less than 3 bytes long
STREAM file must have a record length with a data portion of at least 9 bytes
Input from file Æ0 not allowed when not interactive
Cannot write a NaN.
Invalid STREAM file data
I/O error during TRACEP
File not eligible as STREAM file
Record in file is locked
Error during CALL statement
Cannot open mixed device file
DDS field name &1 in format &2 has ALIAS name &3.
ALIAS name &1 for DDS field name &2 in format &3 is invalid in BASIC
ALIAS name is now &1Å
BASIC GDDM data conversion error
Array not valid as first argument on a CALL DDM statement
At least one argument is required on a CALL GDDM statement
BASIC GDDM data conversion error
Invalid number - reenter whole line
Invalid string - reenter whole line
Too many data items - reenter whole line
Too few data items - reenter whole line
Numeric value does not fit in integer variable
&1 static error(s) found in program. See previous messages
Error &1 in program &3 on line &2
Concatenated length of source lines exceeds 397 characters
Source cannot be reformatted
Function is not supported. See Return Code &1 in the Cause section.
More than 999 messages were found during compile
&1 source records read
&1 was the highest severity message issued
Program already exists
Library in which program was to be created does not exist
User not authorized to create programs
User not authorized to library for created program
Library was locked when attempt was made to insert program
Program &1 syntax checked successfully
Program &1 created in library &2
User storage limit exceeded when creating program
User not allowed to access CL commands from BASIC session
Cannot allocate existing object.
User not authorized to existing object.
The owner of the existing program not the same as the new program.
Program &2/&1 was not created successfully
Error in expression parsing tables
Invalid internal input/output function code received
Output string to session file too long
Untranslatable data stream returned from work station
Input string to expression parser exceeds maximum length
Missing PUT to a GET to the session display
Invalid input string to statement
Input string to command parser is zero length
Invalid internal reader function code received
Null parent pointer in tree node
Invalid text is passed to statement parser
Attempt to convert non-numeric data type &1 to long float
Unknown or improper data type in the node location
The links in the symbol table entry are inconsistent
Non-runnable node at absolute offset &1
I/O support version requested not recognized
I/O output item internal type not recognized
Invalid internal message function code received
No operand addressability through MATINAT instruction
Compiler created incorrect IRP code
PRM failure detected
Machine limit found
Error in GDDM conversion handling
GDDM support version not recognized
The call to 'GDDM' was not successful because GDDM is not installed.
Internal failure in BASIC at &1
BASIC
Line &1:
Line &1/&2:
SESSION DISPLAY
Roll:
F3=Exit F4=Prompt F5=Services F6=SYSTEM F9=Retrieve F24=Lower
F3=Exit F4=Prompt F5=Services F6=SYSTEM F9=Retrieve F24=Upper
F3=Exit F5=Services F19=Scan backward F20=Scan forward
********************************************************************
* *
* BASIC *
* *
* Enter BASIC commands or statements in the input field below. *
* (Enter /n or /-n to move n records forward or backward.) *
* Press the key marked ATTN to interrupt a running BASIC program. *
* (This key is ignored by compiled BASIC programs.) *
* Press F3 (or enter the OFF command) to exit BASIC. *
* *
* *
* *
********************************************************************
SESSION DISPLAY &1
SESSION STARTED &1
SESSION CLEARED &1
Msg Id: &1 Sev: &2 Type: INFO &3
Msg Id: &1 Sev: &2 Type: DIAGNOSTIC &3
From pgm: Inst: To pgm: Inst:
BASIC Services Display 1 of 1
Scan Session File
(F19=Scan Backward F20=Scan Forward)
Scan. . . . . .
Scan type . . .
1=Character string, 2=Word, 3=Prefix, 4=Suffix
Ignore upper/lower case differences . . . .
Y=Yes, N=No
Count all occurrences . . . . . . . . . . .
Y=Yes, N=No
Session file control
Print current session file content. . . . .
Y=Yes, N=No
Clear current session file. . . . . . . . .
Y=Yes, N=No
Print session file on overflow. . . . . . .
Y=Yes, N=No
F1=Help F3=Exit F12=Cancel F24=Upper/Lower
IBM BASIC
Page
Program . . . . . . . . . . . . :
Source file . . . . . . . . . . :
Source member . . . . . . . . . :
Source listing options . . . . . :
Generation options . . . . . . . :
Print file . . . . . . . . . . . :
User profile . . . . . . . . . . :
Authority . . . . . . . . . . . :
Text 'description' . . . . . . . :
Compiler . . . . . . . . . . . . :
IBM BASIC
BASIC Source
*...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
* * * * * E N D O F S O U R C E * * * * *
BASIC Format Listing
Format name . . . . . . . . . . :
Number of field definitions . . :
Record length . . . . . . . . . :
Text . . . . . . . . . . . . . . :
Name Type Len Use Output Input
BASIC Cross Reference By Line
Line Label References (: = Reference by label) (? = Line number undefined)
Label Line References
DUPLICATE LABEL DEFINITION
Name Attributes and References (/ = Defined) (* = Changed)
* * * * * E N D O F C R O S S R E F E R E N C E * * * * *
DDS RECORD FORMAT NAME
PROGRAM
- CONFLICTING USE OR DEFINITION
USER DEFINED FUNCTION
- CHARACTER
- DECIMAL
- INTEGER
PARAMETER FOR FUNCTION
PARAMETER
VARIABLE
ARRAY
IMPLICIT DIMENSIONS
Message Summary
Total Info(0-9) Warning(10-19) Error(20-29) Severe(30-39) Terminal(40-99)
* * * * * E N D O F C O M P I L A T I O N * * * * *
PROGRAM ÆDATA Æ
INPUT ÆOUTPUT ÆBOTH Æ
* * * * * E N D O F F O R M A T * * * * *
File Name . . . . . . . . . . . :
Description not available in source member
BASIC Session Listing
* * * * * E N D O F C O M P U T E R P R I N T O U T * * * * *
Library . . . . . . . . . . . :
* * * * * E N D O F M E S S A G E S * * * * *
Source records read . . . . . . . . :
Highest severity message issued . . :
Begin BASIC Session
Source file
Session file size
Library
Access to CL commands
Execute BASIC Procedure
Source member
Create BASIC Program
Program
Source listing options
Generation options
Print file
User profile
Public authority
Text 'description'
Service data
BASIC Cross Reference By Label
BASIC Cross Reference By Name
BASIC Messages
Line
Message . . . . :
MSGID: &1 SEVERITY: &2
Authority
Start BASIC Procedure
Start BASIC Session
Replace existing program
Replace existing program . . . . :
8-16000 K
More...
BASIC
Compilation
Run time
5770BR1 V7R1M0 100416
Cannot duplicate volumes owned by system &1.
Cannot reclaim volumes owned by system &2.
Volume &1 cannot be used at this time.
&2 not allowed with parallel type &3.
Control group &1 has a backup item with object omits.
No volumes in *INSERT category found in the media library specified.
Volume &1 cannot be expired.
Volume backup exemption status removed.
Automatic duplication &1 started.
Duplication failed.
Automatic duplication for control group &1 completed successfully.
Parameters MEDPTY and MEDREQ must be specified.
Backup Recovery and Media Services for IBM i
Help Index for BRMS
Manage backup, recovery, media, archive, retrieval, and migration
BRMS-Network Feature
BRMS-Advanced Functions Feature
Media Management
Backup
Archive
Recovery
Scheduling
Policy Administration
Report
Maintenance
Network
Security
Migration
TSM ADSM
Media Library
Retrieve
Archive control group
Specific control group
Archive lists
Archive policy
Backup control groups
Backup lists
Backup policy
Migration control groups
Migration information
Media
Basic archive activities
Basic backup activities
Basic migration activities
Basic media activities
Media classes
Specific media class
Media information
Media policies
Specific media policy
Move policies
Specific move policy
Movement
Basic movement activities
Move verification
Recovery policy
Basic recovery activities
Retrieve
Basic retrieval activities
Retrieve policy
System related functions
Basic activities
Auxiliary Storage Pools (ASP)
Devices
Initialize BRM
Log
Not used
System policy
Advanced media activities
Migration
Archive related functions can be secured
Planning and performing archives can be secured
Control groups can be secured from changes
The specific control group can be secured from changes
Not used
The specific list can be secured from changes
The policy can be secured from changes
Backup related functions can be secured
Planning and performing backups can be secured
Lists can be secured from being changed
Migration related functions can be secured
Planning and performing migration can be secured
Migration history information can be secured
Media and related functions can be secured
Basic media activities can be secured
Advanced media activities can be secured
Media classes can be secured
A specific media class can be secured
Media history information can be secured
A specific policy can be secured from changes
Movement and related functions can be secured
Movement, locations, and move policies can be secured
The policies can be secured
The ability to verify movement can be secured
Recovery and related functions can be secured
Planning and performing recoveries can be secured
Retrieval and related functions can be secured
Retrieval controls and policies can be secured
BRMS system level activities can be secured.
Basic BRMS system level activities can be secured.
Basic BRMS ASP related activities can be secured.
Basic BRMS device related activities can be secured.
INZBRM command can be secured
Log related functions can be secured
The maintenance function can be secured
Migration policy
One or more volumes verified.
&1 completed successfully.
Interactive user &1 with job &2 exempted from auto-signoff.
Interactive usage check indicated no user jobs active on system.
Please sign off within &1 minutes to allow backups to process.
Interactive user &1, job &2 was signed off for backups to begin.
&1 user jobs active on system.
Devices needed by control group not available. (C R)
Control group &1 type &2 canceled.
&1 currently in use.
Power down &1 and IPL is started.
Control group &1 type &2 processing is complete.
&1 entries were removed from the BRM log.
BRM log entries have been removed.
Save file &1 for saved item &2 not found.
RENAME value not allowed.
Starting save of library &1 to devices &2.
&1 save of library is &2 complete.
Starting save of library &1 to save file.
Save file created.
Starting SAVSYS to devices &1.
SAVSYS is complete.
Starting transfer of save files to tape.
Transfer of save files to media on devices &1 is complete.
Subsystem &1 is ended.
Subsystem &1 is restarted.
Job queue &1 is held.
Job queue &1 is released.
Interactive users are allowed to stay active.
Control group &1 type &2 completed with errors.
Control group &1 type &2 completed with errors.
IPL cannot be started.
IPL not started. Subsystem &1 has active jobs.
No active entries found in control group &1.
Time &1 is not valid.
Date &1 is not valid.
No entries found meeting search criteria.
Media information report is created.
Entries for date &2 do not exist.
No entries found matching search criteria.
Entries for job &2 do not exist.
Entries for file &2 do not exist.
No save files to transfer were found.
List &1 type &2 objects being processed.
&3 operation is complete.
Library &1 not found or not available.
Objects from library &2 not saved.
SAVTYPE *CUML or *INCR and DLO *SEARCH must be used together.
Device &1 not found.
Volume &1 marked for duplication.
Report is printed.
Volume &1 already marked for duplication.
Duplication mark for volume &1 removed.
Duplication mark for volume &1 not removed.
Libraries will be omitted from &2.
Value for OMITFLR not valid.
Error status for volume &1 removed.
Error status for volume &1 not removed.
Volume &1 is initialized.
Volume &2 used multiple times in list.
Grace period set to expire.
Volume &1 removed from media inventory.
Volume &3 with media class &2 added to the media inventory.
Volume &1 already exists in media inventory.
Media class &1 not found.
Volume &1 not found.
Item &2 will be saved using serial device resources.
Virtual volume &3 not moved.
Save will use serial device resources.
Save will use serial device resources.
Control group required.
Control group &1 created.
Control group &1 changed.
Control group deleted.
Control group &1 not found.
Function key not allowed.
Grace period expired.
Sequence number required.
Sequence number &1 already exists.
Move policy can not be blank.
Policy &1 already exists.
Location &1 not found.
Use days, date, *EXP, *PERM or *GRPnnn.
Specified option number is not allowed.
System &1 not found.
Policy required for this option.
Policy &1 not found.
Policy &1 in use.
Policy &1 created.
Policy &1 changed.
Weekly activity &1 is not valid.
Special value &1 is not valid.
List &1 type &3 for &2 not found.
Cannot establish connection with remote system.
List name required.
Folder list &1 already exists.
Control group &1 in use.
Control group &1 cannot be deleted.
Folder is required.
Use *INC or *EXC.
Object list required.
Object list &1 already exists.
Object and library required.
Object type &1 is not valid.
Object list &1 for backup is added.
Object list &1 for archive is added.
Folder list &1 for backup is added.
Folder list &1 for archive is added.
No entries found in control group &1.
Backup object list &1 changed.
Archive object list &1 changed.
Backup folder list &1 changed.
Archive folder list &1 changed.
Special values and device names cannot be mixed.
No objects archived for control group &1.
List required for this option.
List &1 added.
List &1 in use.
Use *BKU or *ARC.
Use *OBJ, *FLR, *SPL or *LNK for the type of list.
List &1 changed.
List &1 printed.
Recovery object list &1 added.
Recovery folder list &1 added.
Limit cannot be zero for open time.
Recovery object list &1 changed.
Recovery folder list &1 changed.
Device type required for this option.
Network group required for this option.
Network group &1 not found.
Network group &1 in use.
Network group &1 added.
Network group &1 changed.
QBRM cannot be specified.
TGTRLS must be specified.
Parameters cannot use the same value.
Parameter cannot be blank.
Network group required.
Network group &1 already exists.
*MEDINV cannot be deleted.
System name &1 already used within group.
Subsystem and library required.
Use *CNTRLD, *IMMED or *NONE.
Specify number of seconds, or use *NOLIMIT.
Subsystem &1 for specified library not found.
Job queue and library required.
Job queue &1 for specified library not found.
Media class required for this option.
Media class &1 not found.
Class &1 in use.
Media class &1 added.
Media class &1 changed.
Device type &1 not found.
Media class &1 already exists.
Media capacity is required.
Unit of measure &1 is not allowed.
Device &1 is not allowed.
Media policy &1 is not found.
Weekly activity default is not valid.
Duplicate devices not allowed.
A device must be specified.
Entry specified is not valid.
Recovery contact required for this option.
Recovery contact &1 not found.
Recovery contact &1 in use.
Recovery contact &1 added.
Device &2 not type &3.
Recovery contact &1 changed.
Recovery contact must be entered.
Recovery contact &1 already exists.
Recovery contact &1 cannot be removed.
Policy was updated.
Recovery activity required for this option.
Recovery activity &1 not found.
Recovery activity &1 in use.
Recovery activity &1 added.
Recovery activity &1 changed.
Recovery activity is required.
Recovery activity &1 already exists.
Use SUN, MON, TUE, WED, THU, FRI, or SAT.
IPL range time is not valid.
Move policy &1 not found.
Storage location required for this option.
Volume serial &2 not correct.
Location &1 in use.
Location &1 added.
Location &1 changed.
Threshold must be less than or equal to the maximum.
Location &1 already exists.
Location &1 cannot be removed.
Container class required for this option.
Container class &1 not found.
Container class &1 in use.
Container class &1 added.
Container class &1 changed.
Container class &1 already exists.
Container class &1 cannot be removed.
Container required for this option.
Container &1 not found.
Container &1 in use.
Container &1 added.
Container &1 changed.
Container &1 already exists.
Container &1 cannot be removed.
Tape device required for this option.
Device entry &1 in use.
Device entry &1 added.
Device entry &1 changed.
Device entry &1 already exists.
System &1 does not exist in network group.
Device and media policy are interdependent.
Container &1 unpacked.
No volumes to unpack from container &1.
Restoring object &1 from volume &3 sequence number &2.
Archive folder list &1 bypassed for control group &2.
Restoring object &1 from save file &2.
Specified option number is not allowed.
List &1 of type *LNK is added.
*LNK list cannot be used for archive.
Control group &1 already exists.
Value entered for delay is not valid.
Location *HOME cannot be removed.
Volume required for this option.
Volume &1 in use.
Volume &5 changed.
Network job not submitted.
Volume &4 moved.
Volume &3 cannot be expired.
Volume &1 cannot be initialized now.
Volume &1 reinitialized.
Expired Volumes cannot be duplicated.
Subsystem &1 already exists in list.
Backup item &1 already exists in list.
Type required.
Use *ALL, *ALLDLO, *ALLUSR or *ASP, *IBM, *SAVSYS or *SECDTA.
Library required.
User ID or device required.
Entry &1 not found.
Entry &1 already in list.
No entries to print for list &1.
Labels printed for volumes selected with option 1.
File to receive output (OUTFILE) must be specified.
Name for create directory owner required.
Name for create directory program required.
Save date required.
User recovery information cannot be added.
Resume key required.
Volumes were removed from the label print list.
Volume &1 not found in media inventory.
Restore of library &1 submitted to batch.
Object level detail does not exist for selected entry.
Volume &1 marked for label print.
Volume &3 cannot be moved.
Volume &1 expired.
Volume identifier &2 not correct.
Value specified for Volume locations to omit (LOCOMT) parameter is not valid.
Volume &1 cannot be moved.
Image catalog for the mounted virtual volume &5 is not correct.
Density for virtual volume &6 is not correct.
Image catalog entry does not exist for virtual volume &4.
Image catalog does not exist for virtual volume &4.
Volume identifier &2 not correct.
Date &2 is not correct.
Backup history entry &1 removed.
Errors pending.
Command prompting ended.
On device &2, mount next volume. Initializing as &3. (C G)
Initialization stopped at volume &1.
Error in command.
Sign off limit is not valid.
Object retention is not valid.
Media class &1 incompatible with container.
Container not in correct status to add media.
Container &1 is full, volume not moved.
List &1 of type *LNK is changed.
Container &1 requires media with same expiration.
&1 is not a valid name.
Specify a location or container.
Number of volumes is different than assigned.
Container &1 cannot be removed.
Expiration date cannot be changed.
Media volume &1 not moved to location &2.
Update cannot be completed.
Volume &1 not assigned to container.
Media volume &1 has no associated move policy.
Media move operation complete.
Library &1 could not be omitted from backup of &2.
Location &1 is full, container not moved.
Container threshold for location &1 is exceeded.
Location &1 cannot be removed.
Location &1 cannot be removed.
Location &1 is full, volume not moved.
TODEV and FROMDEV must be different.
Threshold &1 is not valid, must be a number or *NOMAX.
Maximum &1 is not valid, must be a number or *NOMAX.
Begin processing for control group &1 type &2.
Control group &1 type &2 not found.
Control group &1 type &2 has no entries to process.
Specify location or container, but not both.
Volume &1 is moved to container &3.
Location of container must match location of media.
Option 6 is not allowed now.
Error occurred processing exit command for control group &1.
Container not moved, too many volumes for location.
Container &1 is moved to location &3.
Error occurred processing backup item.
Unable to use volume &4. (C R)
Control group &2 type &3 canceled.
Unable to use volume &4. (C R)
Control group &2 type &3 canceled.
Media class must be specified.
Specify *ANY or media classes, but not both.
Media class &1 specified more than once.
Model required for this option.
Volume required for this option.
Backup item required.
Backup item &1 incorrect for backup type &2.
List required.
Value &1 exceeds &2 characters.
Folder &1 could not be omitted from the *ALLDLO.
Folder &1 could not be omitted from backup of list &2.
Merge started for file &2 in library &3.
Merge ended for file &2 in library &3.
Merge operation successful.
Archive control group &2 added.
Archive list &2 of type &3 added.
Backup control group &2 added.
Backup list &2 of type &3 added.
Migration control group &2 added.
Device &2 added.
Connection name &2 added.
Storage location &2 added.
Media class &2 added.
Move policy &2 added.
Media policy &2 added.
Container class &2 added.
Container &2 added.
ASP class &2 added.
Volume &2 added.
Archive control group &2 not added. Reason &5
Archive list &2 of type &3 not added. Reason &5
Backup control group &2 not added. Reason &5
Backup list &2 of type &3 not added. Reason &5
Migration control group &2 not added. Reason &5
Device &2 not added. Reason &5
Connection name &2 not added. Reason &5
Storage location &2 not added. Reason &5
Media class &2 not added. Reason &5
Move policy &2 not added. Reason &5
Media policy &2 not added. Reason &5
Container class &2 not added. Reason &5
Container &2 not added. Reason &5
ASP class &2 not added. Reason &5
Volume &2 not added. Reason &5
Volume &2 not updated. Reason &5
File &2 not merged. Reason &5
Merge operation not successful. Reason &5
Option 1 is not valid when errors exist.
Entry not found.
Date &1 cannot be used.
Move policy &1 cannot be deleted.
Media class &1 must be specified.
Media class &1 cannot be removed from the list.
No labels printed.
Label printing completed.
Removal or change to information must take place at location &1.
Multiple devices cannot be specified when using a media library device.
Multiple devices were specified with a virtual tape device.
*SAVSECDTA and *SAVCFG issued for control group &1.
Starting save of list &1 to devices &2.
Save of list &1 complete.
Starting save of list &1 to save file.
No objects were saved for list &1.
Output queue library &1 not found.
Output queue &1 in library &2 not found.
Library must not be specified with *SYSPCY or *PRTF.
Message queue library &1 not found.
Message queue &1 in library &2 not found.
Output queue entry required.
Message queue entry required.
Mount volumes &1 on devices &2. (C G)
Restore operation canceled by reply to mount volumes.
Library should not be specified with *PRTF.
Device &2 not found.
Time &2 not correct.
No entries found for object list &1.
*SYNCLIB save while active not allowed with *IBM backup item.
Specify &1 or device names, but not both.
Save file must be *YES when device is *NONE.
Save to save file must be *YES in media policy &1 if device is *NONE.
Specified LIB value not allowed with SAVACT value.
Media policy &2 not found.
Media usage not valid, control group not processed;
Device is *NONE, control group &1 not processed.
Adding contents for volume &1.
Mode used for processing not valid.
Time &2 not correct.
Job description &2 in library &3 not found.
Job queue &2 in library &3 not found.
SAVDLOBRM requires valid reference date and time.
Starting SAVCFG to devices &1.
Starting SAVCFG to save file.
Save configuration (SAVCFG) complete.
Starting SAVSECDTA to devices &1.
Starting SAVSECDTA to save file.
Save security data (SAVSECDTA) complete.
Starting SAVCAL to devices &1.
Starting SAVCAL to save file.
Save calendar (SAVCAL) complete.
Unable to use volume &5. (C R)
Control group &2 type &3 canceled.
*NONE incorrect for control group.
Duplicate devices not allowed.
Device must be specified.
&2 and device names cannot be mixed.
Mount media of class &1 on device &2. (G C)
Access to media volume &3 by user &2 denied.
&1 save of folder &2 complete.
Starting SAVDLO of folder &1 to devices &2.
Starting SAVDLO of folder &1 to save file.
Starting SAVDLOBRM of folder &1 from reference date &2.
No entries found for folder list &1.
Control group name or *NONE is required.
No media of class &1 is available. (G C)
Volume &5 not under media management control.
Restoring the system not valid.
Volume &5 cannot be used at this time.
Volume &7 is wrong class of media.
Volume &1 marked as cleaned.
ANZLIBBRM command cannot run.
Move policy of media and container are different.
Option 7 is not available when coming from Work with Containers.
No media of class &1 is available at location &3. (C G)
Volume &1 already expired.
Volume &1 not removed.
Expiration date is not correct.
Warning - Multi-volume condition.
Creation date is not correct.
Inactivity limit value not valid.
Device &1 could not be allocated for save file processing.
Device &1 not ready for save file processing.
Devices &3 could not be allocated. (C R)
Save of list &1 completed with errors.
Save file processing is canceled.
Save file processing cannot use volume &4. (C R)
Save file processing is canceled.
Save file processing cannot use volume &4. (C R)
Save file processing is canceled.
Save file processing cannot use volume &5. (C R)
Save file processing is canceled.
Option 6 is not available when coming from Work with Containers.
All volumes in a container must be confirmed for move.
All volumes in a container must be canceled from the move.
Volumes in a container cannot mix confirm and cancel of movement.
*SAVSYS bypassed for control group &1.
*SAVSYS bypassed for control group &1.
*SAVSYS bypassed for control group &1.
Volume &14 on device &2 cannot be used. (G C)
Volume &3 on device &2 cannot be used. (C G)
Volume &5 cannot be used by this system.
Entries exist for &1. (R I C)
Operation canceled by user reply.
Connection to system &1 could not be established.
System &1 with network ID &2 does not exist in BRM network group for centralized media.
Entry already exists.
System start up program executed.
Unable to allocate BRM file &1.
Activate network system operation was successful.
Copy of BRM media inventory complete.
A device must be specified.
Activate network system operation was not successful.
A device must be specified.
System &1 could not be added.
System &1 could not be added.
Volume &3 could not be removed.
System &1 network group &2 added.
Network group &1 could not be removed.
Slot number too large for location.
Slot number already used within location.
Starting history content maintenance.
Media information maintenance removed &1 entries.
Media volume &1 not moved to location &2.
Media volume &1 not moved to location &2.
Media associated with container &1 not moved to location &2.
BRM maintenance procedure started.
BRM maintenance procedure completed.
Subsystems manually started for group &1 type &2.
Network media inventory audit complete for system &1.
Command not allowed in this setting.
Volume expiration procedure expired &1 volumes to give &2 total expired volumes.
Volume error statistics collected from error log.
Data has been moved from the source to destination media.
Container &1 cannot be used.
Density is required.
Shared media cannot be changed to *YES.
Media density and device type cannot be changed.
Media class &1 cannot be removed.
*SAVSYS bypassed for control group &1.
Duplicating volume &1 file sequence &2 of &3
Reclaiming volume &1 file sequence &2 of &3
*SAVSYS not allowed.
Control group &1 type &2 in use.
Library &1 omitted from backup of &2 for control group &3.
No media to work with.
Volume &1 cannot be moved.
Media duplication started for volume &1.
Duplication completed.
Process complete.
Volume move management did not run.
Move management could not access volume &1.
Library &1 is not included in save strategy.
Save analysis indicated &1 libraries not being saved.
Unable to restore, no save exists.
Save to save file must be *NO.
Library entry required.
Output queue &2 in library &3 not found.
Folder name cannot contain an asterisk (*) in the first position.
Unable to restore, object was not saved.
*DOC &1 in &2 not saved.
Recovery analysis complete, report printed.
Recovery process complete.
Representation characters must be different.
Save of BRM media information at level &1 complete.
Date time synchronization to system &1 complete.
Date time synchronization function complete.
Restoring library &1 from volume &3 sequence number &2.
Restoring objects for library &1 from volume &3 sequence number &2.
Restoring documents for folder &1 from volume &3 sequence number &2.
Restoring configuration objects from volume &2 sequence number &1.
Restoring calendar objects from volume &2 sequence number &1.
Restoring user profiles from volume &2 sequence number &1.
Restoring library &1 from save file &2.
Restoring objects for library &1 from save file &2.
Restoring documents for folder &1 from save file &2.
Restoring configuration objects from save file &1.
Restoring System Information from save file &2.
Save of media information at level &1 completed with errors.
Volume &3 cannot be duplicated by this system.
Load volume &3 on &2. (C G)
Cancel reply received for message &1.
Media monitor was changed to active.
Media monitor was changed to not active.
Message queue &1 not found.
*SYNCLIB ignored for &1.
**Warning** media policy &1 has retention date in the past.
Restoring calendar objects from save file &1.
Restoring user profiles from save file &1.
Starting &4 of &1 in library &2 to device &3.
Starting &3 of &1 in library &2 to save file.
Save of &1 in library &2 complete.
Reference date and time required.
Option 13 is not available now.
Restoring object &1 for library &2 from volume &4 sequence number &3.
Restoring document &1 for folder &2 from volume &4 sequence number &3.
Restoring configuration object &1 from volume &3 sequence number &2.
Restoring calendar object &1 from volume &3 sequence number &2.
Restoring user profile &1 from volume &3 sequence number &2.
Restoring object &1 for library &2 from save file &3.
Restoring document &1 for folder &2 from save file &3.
Restoring configuration object &1 from save file &2.
Restoring calendar object &1 from save file &2.
Restoring user profile &1 from save file &2.
No objects were saved.
Object &1 not valid.
Library &1 not valid.
Library &1 not valid.
Object &1 not valid.
Library &1 not valid.
Folder &1 not valid.
User &1 not enrolled in system directory.
Media policy &1 cannot be deleted.
Media policy &1 cannot be deleted.
Media policy &1 cannot be deleted.
Media policy &1 cannot be deleted.
Media policy &1 cannot be deleted.
Move policy &1 cannot be deleted.
Media class &1 cannot be deleted.
Media class &1 cannot be deleted.
Device &1 cannot be removed.
Device &1 cannot be removed.
Device &1 cannot be removed.
Device &1 cannot be removed.
Device &1 cannot be removed.
Device &1 cannot be removed.
Storage location &1 cannot be removed.
Storage location &1 cannot be removed.
Control group &1 bypassed automatic save of media information.
Save operation canceled.
Starting save of media information at level &1 to device &2.
Save calendar (SAVCAL) canceled by reply to devices &1 not ready.
Save configuration (SAVCFG) canceled by reply to devices &1 not ready.
Save security data (SAVSECDTA) canceled by reply to devices &1 not ready.
&1 save of folder &2 canceled by reply to devices &3 not ready.
&1 save of library &2 canceled by reply to devices &3 not ready.
Save of &1 in library &2 canceled by reply to devices &3 not ready.
Save system (SAVSYS) canceled by reply to devices &1 not ready.
Archive operation canceled by reply to devices &1 not ready.
Save of list &1 canceled by reply to devices &2 not ready.
Processing for control group &1 type &2 is canceled.
Save file processing canceled by reply to devices &1 not ready.
Restoring security data not valid.
Creation date cannot be changed.
Volume &3 cannot be changed to use container &2.
Container &1 cannot have a move policy.
Version control checked volume usage.
Devices &3 will be used for control group &1 type &2.
Devices &3 are used for save file processing.
Control group &1 type &2 requested &3 devices, but will only be using &4.
Save file processing using fewer than &3 devices.
Media policy &1 cannot be used.
Control group &1 cannot be processed.
Save level &1 of library &2 not restored.
Restoring save level &1 of library &2.
Save level &1 of library &2 restored.
Restoring save level &1 of object &2 type &4 library &3.
Save level &1 of object &2 type &4 library &3 not restored.
Starting &1 backup, type &2.
Backup &1, type &2 complete.
Restore to library &1 not valid.
Auxiliary storage pool &1 not valid.
Restoring save level &1 of folder &2 DLO &3.
Save level of folder or link not restored.
Save level &1 of folder &2 DLO &3 restored.
Library &2 not correct.
Folder name cannot contain an asterisk (*).
DLO cannot contain an asterisk (*).
Non-labeled tape volume used for input on device &1.
Non-labeled tape volume used for output on device &1.
Input volume &5 is not under media inventory control.
&1 restored.
Object &1 not restored.
Document &1 not restored.
Backup &1, type &2 completed with errors.
Volume &1 rejected. Active file found at file sequence &5. Usage is by &2/&3/&4.
Location required for a media library.
Location &1 already used in a media library.
Media library &1 held.
Media library &1 released.
Media library required for this option.
Media library &1 in use.
Media library &1 not found or not defined.
Media library &1 already exists.
Media library &1 added.
Volume &1 rejected. Active file found at file sequence &5. Usage is by &2/&3/&4.
Media library &1 changed.
Media class &2 not found.
Move policy &2 not found.
Storage location &2 not found.
Container &2 not found.
Volume cannot be renamed &3.
Device type &1 not valid.
Mounted BRM volume &3 cannot be initialized to &4.
FLR parameter required with specified DLO value.
Unable to restore, no objects saved.
Unable to restore, no volume specified.
Unable to restore, save file does not exist.
Initialize of volume &5 with CHECK(*NO) by user &3 denied.
Volume &5 not expired. Initialize not allowed.
Volume &5 cannot be renamed.
BRMS volume &3 rejected on device &2, expecting a non-BRMS volume.
BRMS enrolled volume &5 rejected on device &2, expecting a volume not enrolled in BRMS.
Volume &14 rejected on device &2, expecting a BRMS volume. (C G)
Volume &5 rejected on device &2, expecting a BRMS volume.
Volume &3 rejected on device &2, expecting a BRMS volume.
No objects archived for library &1 in control group &2.
Archiving library &1 in control group &2.
Object &1 not valid.
Object type &1 not valid.
Member &1 not valid.
Object &2 not valid.
Object type &2 not valid.
Single object required.
Single object type required.
No members saved during &3 save of file &1 in library &2.
*SAVSYS bypassed for control group &1.
Restricted state ended.
Contents entry already exists for volume &1, file sequence &2.
Contents entry added for volume &1, file sequence &2.
Contents already exist for beginning volume &1 file sequence &2.
Beginning volume must be the first volume in the list when volume sequence is equal to 1.
Beginning volume cannot be used.
Library &2 cannot be used.
Volume sequence must be 1.
Volume &1 not found.
Library &2 cannot be used.
Volume &1 is not expired.
Library &2 cannot be used.
File origin &2 cannot be used.
Volume sequence &1 not correct for volume &2.
Category for volume &1 not changed.
Volume &1 was not initialized.
Device &1 cannot be used.
Mount of volume &7 in media library &6 bypassed.
Volume &4 cannot be used.
History content entry could not be changed.
History content entry could not be changed.
History content entry changed.
ASP storage limit is not correct.
Date &1 is not valid.
Volume &2 not found.
Contents for volume &3 cannot be displayed.
Storage location &1 cannot be removed.
Device &1 not compatible with media policy &2.
Device &2 not compatible with media policy &3.
Media class cannot be changed to *NONE.
Calendar required for this option.
Calendar &1 not found.
Calendar &1 in use.
Calendar &1 added.
Calendar &1 changed.
Calendar &1 cannot be removed. Reason is &2.
Calendar date cannot be blank.
Calendar name is required.
Calendar &1 already exists.
Date &1 already used within the calendar.
Calendar date &1 added.
Option not supported for device type &1.
Date &1 not found within calendar.
Reference calendar is not valid.
&2 parameter not allowed.
ASP storage threshold has been exceeded.
ASP &1 storage threshold has been exceeded. (C I R)
Save operation for control group &1 type &2 canceled.
Volume was added to media inventory
Media class was added
Location was added
Container was added
Container class was added
Move policy was added
Media policy was added
*ERROR: Volume already exists
Media class already exists
Location already exists
Container already exists
Container class already exists
Move policy already exists
*WARNING: Media class already exists with different density.
Media policy already exists
Threshold exceeded condition for ASP &1 ignored.
Storage location &1 cannot be removed.
Storage location &1 cannot be removed.
Media found that requires movement.
Media found that requires move verification.
*SELECT cannot be used for *CTLGRP during batch processing.
No control groups selected.
Last run date for BRM maintenance was &1.
BRM maintenance has never been run.
Error on command &2.
Control group &2 specified more than once.
Move by group not allowed with durations of other types.
Text &1 not valid for generic search.
Entry specified is not valid.
Volume &1 not found.
Recovery canceled.
Command &1 cannot be used again.
Save operation ended abnormally.
Items specified are not valid.
Entry &2 cannot be specified.
&1 must be the only value for allow object differences.
Entry &2 cannot be specified.
Entry &2 cannot be specified.
Backup item &2 cannot be specified.
Retain Object Detail &2 cannot be specified.
Control group ended by exit program.
Control group &1 type &2 ended abnormally.
BRMS centralized media management not synchronized to system &1.
Retrieving &1 in library &2. (C G I S)
Object &1 not retrieved, reason code &4.
Retrieve of &1 in library &2 submitted to batch.
Retrieve of &1 in library &2 was successful.
Retrieve object &1 member &4 for library &2 in progress.
Retrieve of object &1 member &4 for library &2 in progress.
Retrieve operation processed &1 objects.
Retrieve operation processed no objects.
Spooled file list required.
Spooled file list &1 already exists.
Backup spooled file list &1 changed.
Archive spooled file list &1 changed.
Spooled file list &1 for backup is added.
Spooled file list &1 for archive is added.
Output queue &1 not valid.
Member level detail does not exist for selected entry.
Start of day time is not valid.
Unable to start journaling on &2 in library &3. (C I R)
Volume &3 cannot be expired from current system.
Restoring member &1 for object &2 library &3.
Restoring member &1 for object &2 library &3.
*MATCH not valid when restoring members.
Unable to create folder &1. Errors occurred.
Unable to open stream file &1. Errors occurred.
Error writing stream file &1. Errors occurred.
Error opening spooled file &1 number &2.
Restoring all spooled files for entry is not valid.
Spooled file report is created.
Stream file &1 was not opened successfully.
Stream file &1 was not read successfully.
Stream file pointer reset failed.
Stream file &1 has not valid spooled attribute data.
Job information cannot be retrieved. Errors occurred.
Unable to create space object in library QTEMP.
Unable to create new spooled file for restore operation.
Error writing new spooled file data.
Error closing source spooled file.
Error closing stream output file.
Stream file &1 not closed successfully.
Spooled file attributes cannot be retrieved.
Errors occurred reading spooled file.
Errors occurred during change of a space object.
Error writing file &1.
File &1 not opened successfully.
List spooled file operation failed.
Density must be specified.
Specify either *DEVTYPE or density values.
Density &1 specified more than once.
F4 not valid unless a valid device type is entered.
F4 not valid unless a valid device type and model are entered.
The list is printed.
Selecting devices with density &1 for control group &2 type &3.
Device with density &3 are not available. (C R)
Selecting devices with density &1.
Devices with density &3 are not available. (C R)
Devices requested for location &1 not found.
Device &1 not compatible with media policy &2.
The density for the media policies do not match.
Devices with density &3 are not available. (C R)
Devices with density &3 are not available. (C R)
Media class &1 not compatible with media policy &2.
Device &2 not compatible with media class &3.
Specifying *ALL for every entry not valid when *EXC is used.
Volume &1 cannot be updated.
Volume &3 cannot be updated.
Restricted state connection not added. Reason &2.
Volume &1 cannot be updated.
Volume &3 cannot be updated.
Archive spooled file list &1 bypassed for control group &2.
No entries found for spooled file list &1.
Type &2 cannot be used.
Type &2 cannot be used.
Expiring media.
Removing media information.
Executing synchronization audit.
Moving media.
Exit program operations ended. Reason &2.
Exit program operations ended. Reason &2.
Changing BRMS journal receivers.
Retrieving media statistics.
Removing log entries.
Creating expired media report.
Creating media information report.
Creating library analysis report.
Creating recovery analysis report.
Creating recovery work sheet report.
Creating location analysis report.
Command STRRCYBRM not allowed in this setting.
Media information object &1 was not saved successfully.
Begin processing from control group &1 type &2 sequence &3.
Sequence &2 not found.
Media library command not found.
Control group &2 not found.
Media volume &3 with media class &2 added but not registered.
Feature not installed.
Slot number *NEXT required when adding multiple volumes.
Remote network ID cannot be blank.
Retrieve of object &1 for library &2 bypassed.
Feature not licensed.
Value specified for media monitor not valid.
No objects archived for &1 in control group &2.
Subsystem &1 was not ended.
No second level help available.
Cannot send media information to &1.
When *MEDPCY is entered a value must be entered for MEDPCY parameter.
MEDCLS parameter must be specified.
Entries for objects not saved were not added. Reason &2.
List &2 of type &3 has been changed.
List &2 type &3 added to the control group &4.
Request for &1 expired volumes for media class &3 was not successful.
&2 media volumes available. (C I R)
Request for &1 expired volumes successful.
Media duplication not successful.
Requested function not available.
No media found for duplication.
*MEDPCY not allowed when MEDPCY(*NONE) specified.
Container &1 cannot be changed.
Option not processed for media library &1.
Auxiliary storage pool &2 not found.
Operation canceled because of reply to check of expired media.
Check of expired media operation ignored.
Report &1 created with &2 entries.
Input list of *VOL cannot be specified with *LIST.
Input list of *VOL must be specified with *SEARCH.
Console monitor is already active.
Not in correct environment to start console monitor.
BRMS console monitor is now active.
Monitor active. Previous request completed on &1 at &2.
BRMS console monitor is inactive.
BRMS console monitor beginning request processing.
Currently processing a request.
BRMS console monitor completed request processing.
BRMS console monitor is now ending.
Console monitor is not active.
Request to process &1 was submitted to the console monitor.
Request to process &1 was submitted to the console monitor.
Media synchronization audit skipped.
Request to process &1 was submitted to the controlling subsystem.
No link information found.
No directory detail was found matching the list criteria.
No object information found.
No directory detail information found.
Information for &1 not removed.
Information for &1 not found.
Information for &1 not removed.
Information for &1 not found.
Control group &1 type &2 ended abnormally.
Control group &1 type &2 ended abnormally.
This is a subsetted list.
&2 parameter not allowed.
This is a subsetted list.
Requested operation will remove all BRMS product data. (G C)
File origin is blank, unable to restore.
User exit returned and requested a retry operation.
User exit returned and requested to fail the operation.
Media monitor was not active during processing of volume &1.
Volume &3 on device &2 is write protected.
Printing version report.
Audit synchronization was not run for system &1.
Migrating item &1 type &2 in control group &3.
Migration not performed, reason code &1.
Item &2 type &3 not migrated, reason code &1.
Item &2 type &3 not migrated, reason code &1.
Item &1 type &2 promoted.
Item &1 type &2 demoted.
Item &1 type &2 migrated.
&1 items migrated.
Migration information for &1 type &2 removed.
Removing migration information.
Item &1 type &2 migrated from ASP &3 to ASP &4
ASP &2 not used for migration; reason code &1.
Item information for &1 cannot be removed.
Spooled file &1 cannot move from output queue &2 in &3 to output queue &4 in &5. Reason code &7.
Spooled file &1 moved from output queue &2 in &3 to output queue &4 in &5.
Migration information maintenance removed &1 entries.
No output queues were found meeting selection criteria.
Migration not performed, no ASPs exceed low threshold.
Cannot migrate, no available storage.
Migration not performed, no migration candidates were found.
Migration not performed for control group &1.
Cannot migrate item &1, already in ASP &4.
Cannot migrate item &1, objects in use.
Cannot migrate item &1, not allowed.
Operation not allowed, resources not available.
Migration not performed.
Migration not performed, no eligible ASPs.
Cannot migrate item &1, no room.
Cannot migrate item &1, threshold too high.
Cannot migrate item &1, cannot promote.
Cannot migrate item &1, cannot demote.
Cannot migrate item &1, threshold too low.
Cannot migrate item &1 type &2 to user ASP.
Cannot migrate item &1, invalid objects.
Cannot migrate item &1, not authorized.
Cannot migrate item &1, currently in use.
Cannot migrate item &1, no longer in ASP &3.
ASP &1 does not support migration
ASP &1 not eligible for migration.
ASP &1 does not support migration
ASP &1 does not support migration
File &1 cannot be moved to output queue &4.
File &1 cannot be moved to output queue &4.
File &1 cannot be moved to output queue &4.
File &1 cannot be moved to output queue &4.
File &1 cannot be moved to output queue &4.
ASP &1 does not support migration
Volume &3 on device &2 is write protected. (C G)
Item &1 type &2 already exists in list.
Policy &1 updated.
Item name required.
Item name not correct.
ASP class &1 added.
ASP class &1 changed.
ASP class &1 deleted.
ASP class &1 renamed to &2.
ASP &1 added to BRMS.
ASP &1 changed.
ASP &1 deleted from BRMS.
ASP &2 not valid.
ASP class &1 not found.
ASP class &1 cannot be removed.
ASP class &1 already exists.
Priority &1 already assigned to ASP class &2.
ASP &1 cannot be removed.
ASP &1 already exists.
ASP number &1 already assigned to ASP &2.
ASP number &1 does not exist.
Action &1 not valid.
Item type not valid.
Item &1 type &2 added to list.
Item &1 type &2 removed from list.
Library name cannot exceed 10 characters.
&1 was not found in &2.
Threshold value cannot be *ASPCLS when ASP class is *NONE.
ASP not added.
Low storage threshold value not valid.
High storage threshold value not valid.
Storage hierarchy priority not valid.
ASP class not valid.
ASP number not valid.
ASP name &1 not a valid name.
Errors occurred.
ASP &1 renamed to &2.
Date value &1 not valid.
Information for item &1 type &2 removed.
First level (root) folder &2 not found.
Library &2 not found.
Volume &6 on device &2 is density &3.
Cannot find required program for TSM access.
User not enrolled in system distribution directory.
Item &1 is not eligible for migration.
ASP value of *ALL must be specified.
Item type must be blank when &1 is specified.
ASP &1 cannot be removed from the system.
ASP &2 set ineligible for migration by BRMS.
ASP not eligible for migration.
Item &1 type &2 omitted during migration.
ASP value of *ALL or 1-32 must be specified.
Migration for control group &1 ended.
No user ASP objects were found.
No authority information to restore.
Authority for &1 type &2 was restored.
Authority for &1 type &2 was not restored.
Authority information for some objects in the specified ASPs was not restored.
Authority information for all objects in the specified ASPs was restored.
Authority information for &1 type &2 in &3 was not restored.
Authority for &1 type &2 in &3 was not restored.
Error found on call to &1 in &2.
Authority information for user ASP library objects has been saved.
Authority information for user ASP DLO objects has been saved.
Starting restore of authority information in user ASPs.
System libraries cannot be migrated.
Not authorized to migrate library &2.
Not authorized to migrate folder &2.
Storing authority information for objects in ASP &1.
Media balancing completed successfully
Media balancing completed with errors.
Owner for volume &2 was changed from system &3 to system &4.
Device cannot be added.
Category required for adding device.
Category &1 not correct.
TSM file space contains characters that are not valid.
Buffer size &3 not valid.
Internet address required for *NET categories.
Internet port number not valid.
Device entry &1 added with warnings.
Device &1 not added as category &2.
&1 required when using *ADSM media.
&1 required when using *ADSM media.
*ADSM required for move policy, media class and secure volume.
*ADSM required for move policy, media class and secure volume.
TSM management class contains characters that are not valid.
TSM node not valid.
TSM password not valid.
*NO required for save to save file.
Media class cannot be changed.
Password not correct.
Only one device can be specified.
Media policy &1 cannot be used.
Device &1 cannot be used.
Device &2 not compatible with media policy &3.
Media policy &1 not compatible with media policy &2.
Target release not valid with saved spooled file data.
Automatic back up of media information must be *NONE.
Device &1 cannot be used.
Item &1 cannot be specified.
List &1 type &2 cannot be specified.
*SYNCLIB not valid for this backup operation.
Policy cannot be updated.
Control group attributes cannot be updated.
Device &2 cannot be used.
Media policy &2 cannot be used.
*ADSM required for MOVPCY and VOLSEC.
*ADSM not valid for MOVPCY or VOLSEC.
SAVF parameter must be *NO.
TGTRLS parameter not valid for *ADSM device
Library &2 cannot be specified.
Object list &1 contains libraries that could not be saved.
&1 required when using *ADSM media.
Library &1 omitted from backup control group &3.
Devices for location &3 in use. (C R)
Devices at location &3 not found. (C R)
Device needed by control group not available. (C R)
Value specified for storage threshold not correct.
Value specified for object size not correct
Retrieved object retention not correct.
Management class &1 could not be assigned.
Object could not be sent to TSM server.
Errors occurred sending data to TSM server.
Object could not be received from TSM server.
Errors occurred receiving data from TSM server.
Media information entries not removed for device &1.
Device &1 cannot be used for recovery.
Errors occurred initiating session using device &1.
ASP high storage threshold not correct.
Extend retention on usage not correct.
Device required for this option.
Device &1 cannot be used for recovery.
Output queue &2 in library &3 cannot be used for migration.
Selecting TSM device with location &1 for control group &2 type &3 .
Maximum size must equal or exceed minimum size &3.
Cursor location is not correct.
Migration required.
Migration &1 has already been used.
Item type &1 can only be used once for a migration.
Item type &1 cannot be used.
Item type required.
Other specifications cannot be used with item type &1.
Item type &1 cannot be used with other item types for a migration.
Use days, date, number of megabytes, or *CURRENT.
Specify a date or *CURRENT in conjunction with the test.
Specify a number in conjunction with the test.
Use number, percent, *ANY, or *ALL.
Specify a number 1 to 99 percent.
Value required.
Restoring library &1 from TSM (ADSM) device &2.
Restoring objects for library &1 from TSM (ADSM) device &2.
Restoring documents for folder &1 from TSM (ADSM) device &2.
Restoring object &1 from TSM (ADSM) device &2.
Restoring object &1 for library &2 from TSM (ADSM) device &3.
Restoring document &1 for folder &2 from TSM (ADSM) device &3.
Restoring member &1 for object &2 library &3 from TSM (ADSM) device &4.
Item type &1 has already been used.
Retrieving &1 in folder &2. (C G I S)
DLO retrieve for &1 not successful.
Retrieve of &1 in folder &2 submitted to batch.
Retrieve of DLO &1 for folder &2 bypassed.
Retrieving IFS object &1. (C G I S)
Restoring System Information from TSM (ADSM) device &2.
IFS object retrieve for &1 not successful.
Retrieve of IFS object &1 submitted to batch.
Retrieve of IFS object &1 bypassed.
Archive link list &1 bypassed for control group &2.
Restoring object &1 for library &2 from volume &4 sequence number &3.
Restoring document &1 for folder &2 from volume &4 sequence number &3.
Restoring configuration object &1 from volume &3 sequence number &2.
Restoring calendar object &1 from volume &3 sequence number &2.
Restoring user profile &1 from volume &3 sequence number &2.
Restoring member &1 for object &2 library &3.
Restoring library &1 from volume &3 sequence number &2.
Restoring objects for library &1 from volume &3 sequence number &2.
Restoring documents for folder &1 from volume &3 sequence number &2.
Restoring System Information from volume &3 sequence number &2.
Restoring configuration objects from volume &2 sequence number &1.
Restoring calendar objects from volume &2 sequence number &1.
Restoring user profiles from volume &2 sequence number &1.
Restoring object &1 from volume &3 sequence number &2.
Retrieve of object &1 member &4 for library &2 in progress.
Item removed from TSM (ADSM) server &1.
Item not found on server device &1.
Errors occurred removing item from TSM server.
Error number &1 occured in program &2, for operation &3.
Add failed for volume &5 located in media library device &2 on remote system &3 in network group &4.
Incorrect password for media policy &1.
Error registering storage extension program.
BRMS is not registered to the Media Storage Extensions feature.
Duplication completed with errors.
Generic value not supported for object name.
Value &2 not valid for subtree.
Value &2 not valid for &3.
Exit program &1 in library &2 not found.
Exit program &1 in library &2 not available.
Not authorized to run exit program &1 in &2.
List &1 cannot be copied to the specified remote system.
Device &2 not allowed with control group entry &3.
Value entered for days used per month is not valid.
Media class *NONE cannot be specified.
User profile is not authorized to print system information.
Save history does not exist.
Item &1 restored with serial processing.
Maximum resources specified not valid.
Devices specified are not compatible.
Devices specified are not compatable.
Minimum resources specified not valid.
Maximum resources specified not valid.
Multiple *MEDCLS not allowed.
Maximum resources specified not valid.
&2 not allowed with parallel.
*SYNCLIB not allowed with parallel.
Minimum number of resources not available.
Multiple subsystem entries not allowed.
Library must be *ALL.
Multiple *MEDCLS cannot be specified.
Range not correct for parameter &1.
All CPF37xx messages could be signaled. xx is from 01 to FF.
OUTFILE parameter must be specified with OUTPUT(*OUTFILE).
OUTPUT(*OUTFILE) must be specified with OUTFILE parameter.
All CPF38xx messages could be signaled. xx is from 01 to FF.
Error occurred with receiver variable specified.
Required parameter omitted.
Pointer is not on a 16 byte boundary.
Value not valid for field.
Value not valid for field.
Value not valid for field.
Length &1 for key &2 not valid.
Value for key &1 not valid.
Key &1 not valid for API &2.
Key &1 not allowed with value specified for key &2.
Key &1 required with value specified for key &2.
Value for key &1 not allowed with value for key &2.
Required key &1 not specified.
Key &1 allows one value with special value.
Number of variable length records is not valid.
Key specified more than once.
Key not valid for object.
Operation not valid.
Object type not valid.
Signature verification failed for object.
Key is not valid for saved item.
Saved item not deleted.
Maximum number of &5 entries exceeded.
Product feature required.
Object does not exist.
Object not created.
Object not deleted.
Entries not added.
Attributes not changed.
Saved item not restored.
Unexpected condition with &1 API. Reason &2.
Value for field in file not valid.
Restore not successful.
Operation failed because objects are being used.
Relational database directory entry &2 required.
Error using auxiliary storage pool. Reason &2.
Error using auxiliary storage pool device. Reason &2.
Operation ended by media management. Reason code &1.
File not found in directory.
This operation will affect other displayed items
Subsetted list obtained.
Specified value not correct.
Item can not be included and excluded.
All objects omitted from save.
Function &1 not found.
Specified value not correct.
&3 was registered as a function of BRMS.
&1 given &2 usage.
Activity override not valid.
Retention override not valid.
Saved item not found.
Submit to batch value not valid.
Item not processed for group &1.
Backup item not processed.
Recovery parameter not correct for package.
DEV and MEDPCY parameters are required.
CTLGRPATR(*YES) requires a valid backup control group.
Parameter value not valid with SAVACTOPT(*ALWCKPWRT).
Parameter specified with CTLGRPATR *YES is not valid.
Parameter value not valid with CTLGRPATR *YES.
Value for CTLGRPATR parameter not valid.
Media monitor disabled.
Volume ID does not match cartridge ID.
Selection complete.
File group &2 not found.
File group type &2 not found.
System name &1 not in correct format.
&2 required for &3.
Reorganization of file &2 recommended.
Estimated initialization time is &6 hours and &7 minutes.
Estimated update time is &6 hours and &7 minutes.
Option &2 ignored.
Access denied for user &1.
Access denied for user &1.
Advanced function not installed.
Product has expired.
Product will expire in &1 days.
Registration of media not allowed.
DMPBRM completed with errors.
Load the next volume in the set,on device &4. (C G)
Container &2 not found.
Location &2 not found.
Job &2 not processed.
Saved item &2 not available for recovery.
Waiting for reply to concurrent recovery request.
Volume not specified.
Saved items not selected. Reason &2.
Subsetted list obtained.
BRMS product initialization required.
BRMS product initialization started.
BRMS product initialization successful.
BRMS product initialization ended abnormally.
BRMS product initialization already started.
BRMS initialization not required.
BRMS initialization job submitted to batch.
BRMS product initialization not started.
Grace period set to expire.
List &2 not found.
List type &2 not correct.
List use &2 not correct.
Control group &2 not found.
Control group type &2 not correct.
Requested function not correct.
Length &3 not correct.
Format name &1 not correct.
Parameter &2 not correct.
Sequence &2 not correct.
Weekly activity &2 not correct.
User specified function not correct.
Error detected using recovery program &2 in &3.
Recovery exit program &2 in &3 not found.
Recovery exit program not correct.
Package identifier &1 used.
List &2 already exists.
Control group &2 already exists.
Default activity not correct.
Packages are restricted to &2 media files.
Recovery exit program &2 in &3 not found.
Control group &1 not successful.
Recovery of first media file required.
User profile &2 not found.
Level not current.
Object &2 does not exist.
Could not apply or remove journaled changes.
Option &2 specified more than once.
Job &2 not processed.
Job &2 not processed.
Option &3 cannot be specified with option &2.
Object days used count not reset.
Request failed with error code &3.
&3 not correct for parameter &2.
Parallel recovery not successful.
Access denied for unregistered function.
No active package found.
No items match criteria.
Value not correct for parameter.
File &1 not reorganized.
TSM node name not created.
TSM password not changed.
Values not valid for parameters.
Backup item &2 saved at current release.
TSM node name not deleted. Reason &2.
Cartridge &1 not available.
&2 may be ignored.
Control group &2 not correct.
&2 ignored.
&2 cannot be changed.
&2 omitted from &3 for control group &4.
No activity found to process.
A remote system may have additional journal receivers.
Media duplication restart recovery.
Media duplication completed with errors.
List &1 can not be deleted.
&2 not correct for &3.
A full backup was performed instead of an incremental backup. Reason code &2.
Journaled changes operation was not performed. Reason &10
Could not apply or remove journaled changes.
Media of class &1 is unavailable at location &2.
Maximum number of control group entries exceeded.
BRMS information not found.
Change to media controls successful.
OBJ parameter not correct.
Save file not correct with SAVSYS.
Density or format does not match media class.
ASP number required.
Option &1 not correct.
Local database files were used instead of remote system database files.
Value &1 is not supported in restricted state.
Value &2 cannot be specified.
Value &2 must be specified.
Value &2 cannot be specified.
Command exceeds allowable length.
Control group &2 cannot be copied or deleted.
Control group &2 cannot be copied to system &3.
Object &2 in library &3 can not be restored. Reason &8
Multiple devices were specified with an optical or virtual optical device name.
Volume list exhausted.
Volume identifier &2 not valid.
Starting transfer of save files to optical.
Volume &4 rejected. Active files found. Usage is by &1/&2/&3.
Requested function not supported for optical.
Volume &2 not added.
Volume &1 with volume identifier &2 and media class &3 added to the media inventory.
Device &2 not compatible with media policy &3.
Device &2 not compatible with media class &3.
Devices specified are not compatible.
Requested function not supported.
Device &2 cannot be used.
Volume &2 not added.
Volume identifier *INSERT not allowed for optical devices.
Selecting records, please wait.
Multiple volumes detected at location &2 slot number &3
Master keys were not saved after last changes to the master keys.
Encryption has been disabled for backup item.
Media information was last saved on &2.
Save or media duplication operation was performed with encryption.
Media duplication was performed without encryption.
Non-encrypted media was duplicated with encryption.
Master keys were not saved after last changes to the master keys.
Encryption has been disabled for media policy &2.
Objects not journaled report &1 created.
System &1 removed from BRMS network by system &2.
Saved item cannot be recovered. Reason &2
Recovery completed with errors.
Command ended due to error.
Media reclamation started for media.
Media reclamation completed for media.
Media reclamation not successful.
Media reclamation not successful for media.
Too many media in a set.
Job &3/&2/&1 is being held by job &6/&5/&4.
BRM restricted procedure started.
BRM restricted procedure ended.
Volume &1 was not moved to location &2.
Y N
Yes No
SUN MON TUE WED THU FRI SAT
M G T
M G T K
YYMMDDHHMMSS
1=KB, 2=MB, 3=GB
1=MB, 2=GB
FULL INCR OFFSITE ARCHIVAL VAULT SAVSYS VIRTUAL
Entry created by BRM configuration
QTRINCH HALFINCH REEL REEL1600 EIGHTMM
F4 for List
Released Held
3494, 3495, *USR
QBRMBKUP QBRMARCH QBRMMAINT BRMS
Unknown status
Available
Mounted
Not available
Ejected
Error
Inserted
Duplicate
Ejected
Active
Offline
Online
Message . . . . :
Job . . . . . . .:
Device &2 cannot be allocated.
Inactive
Inserted
Duplicate
Backs up the entire system
Backs up all system data
Backs up all user data
All printed output
All IBM directories
Online backup of all Lotus servers
All IFS except all Lotus data
All IFS except online Lotus data
All Lotus except the online data
Associated user list for *LNKOMTONL.
Associated user list for *LNKOMTLTS.
Associated user list for *LTSOMTONL.
Associated user omit list for *LINK.
All user directories
All CPF98xx messages could be signaled. xx is from 01 to FF.
Output file name required when output member is specified.
Restore output not created.
Unexpected BRMS error detected. Reason &2.
5770BR1 V7R1M0 100416
ASPs to restore
ASPs to omit
2-99, *NONE, *ALLUSR
Name, 1-32, *SAVASP, *SYSTEM
Name, *NONE
Name, 1-32, *MEDPCY, *SYSTEM
Name, 1-32, *ALL, *SYSTEM
Name, 1-255, *ALL, *SYSTEM
Name, 1-32, *SYSTEM
1-255, *SYSTEM
Name
Name, 2-32, *ANY, *SYSTEM
Start BRMS
Start Backup using BRM
Control group
Schedule time
Submit to batch
Expire media set volumes
Omits
Refree
Auto-retrieved objects
Reorganize BRMS database
Work with Saved Documents
Document
Name, generic*, *ALL
Folder
List
Date, *BEGIN, *CURRENT, nnnnn
From date
Date, *END, *CURRENT, nnnnn
Sequence option
Omit folders
Work with Classes using BRM
Incremental type
Link list
Work with Save Files
Work with Containers using BRM
Name, *ALL
Container ID
*ALL, *OPEN, *CLOSED...
Status
Name, *ALL
Location
Output
Work with Devices using BRM
Work with Lists using BRM
Type of usage
Work with Media using BRM
Select volumes
Beginning creation date
Ending creation date
Date, *BEGIN, *CURRENT, nnnnn
Beginning expiration date
Date, *END, *CURRENT, nnnnn
Ending expiration date
Name, *ALL
From location
Container
Sequence
Work with Media Classes
Name, generic*,*ALLUSR ...
Work with Policies using BRM
Policy type
Work with Saved Folders
Work with Saved Lists
Work with Saved Objects
Object
Library
Type
To date
Save status
Object information
Work with Locations using BRM
Add Media to BRM
Character value
Volume identifier
Media class
Action
Detail
From media class
Volume prefix
Write BRM Log
ID
Message identifier
Message data
Message file
Program id
Functional type
Send to *SYSOPR
Override severity
Remove Log Entries from BRM
*ALL, *ARC, *BKU, *MED, *MNT
Type
Work with Media Information
Library
Volume
Save type
Entries to be displayed first
Display Backup Plan using BRM
Display Log for BRM
Severity
Initialize Media using BRM
Device
New volume identifier
New owner identifier
Character value, *MOUNTED
Next volume message
Media density
Code
End of media option
Clear
Number of media to initialize
From ASP
Volume mount delay
Use optimum block size
Restore Library using BRM
Auxiliary storage pool
ASP high storage threshold
Extend retention on usage
Save time
Restore to library
Save type
Option
Database member option
Allow object differences
Restore Object using BRM
Object
*ALL, obj type
Object type
Restore source
Object ID
Objects to omit
Start Archive using BRM
hhmm, *IMMED
Run option
Move policy
Control group
Initialize media
Expiration date
Media class
Container class
System name
To media policy
ASP device
Merge
To library
From library
Print Labels using BRM
Date, *PERM, *NONE
Name, *NONE
Last moved date
Date, *NONE
Name, *NONE
Media policy
Remove Media Volumes from BRM
Send program message
Volume
Analyze Libraries using BRM
Disclaimer:
Values shown above are based solely on disk space, media, and device information.
Estimates do not include considerations for system type, system size, or workload.
Disk space information is retrieved only when that option is selected on the Backup Planning menu.
Error: Default media class has not been established or is not specified in the System Policy.
Error: Device information entries do not exist or default device not specified in System Policy.
Error: *1 No move policy or no move rules were found. Volume will move to default home location.
Error: *2 Unable to assign a container for indicated volume.
Error: *3 Location reached maximum number of volumes. Move operation bypassed.
Verify Moves using BRM
Error: *4 Location reached maximum number of containers. Move operation bypassed.
Error: *5 Volume movement for this move policy was prevented by move calendar schedule.
Error: *6 Reference calendar refers to a calendar previously defined.
Number
Error : *7 Volume marked for duplication.
Library
Error : *9 Volume in use by another job.
Error : *8 Volume is exempt from movement.
Print Media Movement
Type
*ALL, name
Begin
End
Copies
Output queue
Move date
File to receive output
Output member options
Member to receive output
Replace or add records
Move Media using BRM
Save active wait time
Object locks
Pending record changes
Other pending changes
Work with Control Groups
Type
Journal
0-99999, *NOMAX
0-99999, *LOCKWAIT ...
0-99999, *LOCKWAIT, *NOMAX
Monitor Save While Active
Saved library
Command to run
Job description
Job queue
Time limit in seconds
Library
Save DLO using BRM
Document library object
Device
Save active
Data compression
Data compaction
Date, *PERM, *VERnnn
Save to save file
Retain object detail
Name
Type of save
Sequence number
*REF, Date
Reference date
*REF, Time
Reference time
Owner
Save file ASP id
Save Folder List using BRM
Folder list
Save contents of save files
Expiration date
Retain DLO detail
Auxiliary storage pool device
Save Library using BRM
Name, generic*, *IBM, *ALLUSR
Save active message queue
Save access paths
Journaled objects
Save Object using BRM
Save System using BRM
Start controlling subsystem
Omit
Save Object List using BRM
Object list
Save Save Files using BRM
Run Recovery using BRM
Restore DLO using BRM
Document library object
Saved folder
Object name generation
Name, *ALL
New object name
Restore into folder
Name, *SAME
Copy Media Info for BRM
Type of copy
File
Library
*Error: Media class not found.
*Error: Duplicate volume serial number.
Pending move confirmation, cannot expire.
Pending volume duplication, cannot expire.
Remove Media Info from BRM
Remove options
Media contents
Object level detail
Start Maintenance for BRM
Remove history option
Run media movement
Expire media
Remove log entries
Change BRM journal receivers
Print expired media report
Print media information
Save strategy exceptions
Recovery analysis
Start Subsystems using BRM
Control group
Type
Print recovery reports
Activities
Start Expiration for BRM
Run cleanup operations
Retrieve volume statistics
Audit system media
Print version report
Recovery locations
Initialize BRMS
Type of initialize
System to receive request
Duplicate Media using BRM
From volume identifier
From device
To device
From device end option
To device end option
To volume identifier
Duplicate Media Set
Display Duplicate Media
Volume identification
From sequence number
Starting file sequence number
Ending file sequence number
To sequence number
Print Media Exceptions for BRM
Work with Recovery Activities
Start Recovery using BRM
Option
Action
Start time and date
Time, *AVAIL
Date, *CURRENT, *BEGIN
End time and date
Date, *CURRENT, *END
Auxiliary storage pool ID
Control group
Library
Beginning time
Beginning date
Ending time
Ending date
WARNING: Volume is not in the BRM Services media inventory.
Change Link List
Objects
Include or omit
Directory subtree
Display Link List
Create parent directories
Parent directory owner
Use duplicate media
Mark history for duplication
Set Media Controls using BRM
Information type
Value
Save Media Info using BRM
Set Network Time using BRM
*Expired
*1 No media class found for volume.
*2 Media has exceeded use count.
*3 Read error threshold has been exceeded.
*4 Write error threshold has been exceeded.
*5 Volume has exceeded clean usage threshold.
*6 Reorder point has been reached for this class.
*7
*8 Media has exceeded media life parameter.
*1 Number of volumes has exceeded threshold.
*2 Number of containers has exceeded threshold.
Input controls
Allow conversion
File label
Select version
Retention
Retention type
Retain media
*SAME, Date, Number
Text
Secure volume
Activity
Scratch media location
¤¤
Number to add
Check for active files
Member
Media library
Category
BRM volume
Work with Media Library Media
Volume sequence
File origin
Entry date
Entry time
Objects saved
Objects not saved
Record format
Record length
Block length
Block count
Add Media Information to BRM
Beginning volume
Add Media Library Media to BRM
Add volume to BRM
Work with Media Libraries
Display ASP Information
Object pre-check
Media uses
Read errors
Write errors
Bytes read
Bytes written
Current bytes written
Maximum bytes written
Last clean date
Uses since cleaning
Use save files
Creation date
Slot number
System
Date, *SAME, *PERM, *NONE
Change Media using BRM
Target release
Clear
Work with Calendars using BRM
Starting library
Libraries to omit
Allow duplicate entries
Control group selection
Change Job Scheduler
Scheduler type
Add a job command
Command prompt for add
List jobs command
Command prompt for list
Select jobs command
Command prompt for select
File group
File group type
Note: Volume movement for this media policy was prevented by move calendar schedule.
Input volume list
Resume Retrieve using BRM
Retrieve select
Confirm retrieval
Retrieve device
Set Retrieve Controls for BRM
Retrieve confirmation
Retrieve authorization
Interactive operation
Batch operation
Saved ASP ID
Restore to ASP
Extract Media Information
Work with Saved Spooled Files
Job name
User
User data
Volumes to list
Remove media information
Time period for save files
Select dates
Select creation dates
Select expiration dates
Time period for recovery
Save level
Copy media information
Starting sequence
Append to media
Remote network identifier
*WARNING-Meets active file count specification
*EXPIRED-Due to active file count specification
*WARNING-Location does not allow expire.
Active file count
Active file action
Save date
Image catalog
User recovery information
Save media information
Spooled file data
Resume key
Select volume create date
File retention type
Volume locations to include
From system
Previous system name
New system name
Libraries to omit
Check Expired Media for BRM
Date for save
Date, *CURRENT, nnnnn
Volume locations to omit
Save time
Save level time reference
Restore incremental
Private authorities
Exempt from movement
Required volumes
Message queue
Mark volumes for duplication
Expiration date
Save to save file
Save file ASP
Retain save files
ASP storage limit
Secure volume
Time period for log output
Retrieved object retention
Work with Link Information
Add subsequent saves
Directory
*ALL, generic*...
Reset days used counter
Dump BRMS
Level
Joblog to dump
*CURRENT, *PRV, VxRxMx
Dump device
Migrate using BRM
Item type
To asp
Folder to omit
Name, 1-32, *SYSTEM, *SYSBAS
Move Spooled Files using BRM
From output queue
To output queue
Spooled file ASP
Spooled file
Select create date
Select last used date
Select size
Minimum size
Maximum size
Start Migration using BRM
Sort sequence
Work with ASP Descriptions
ASP class
Name, generic*, *ALL, ...
Work with Migration Info
Item
From ASP
To ASP
From ASP class
To ASP class
Migration status
Remove migration information
Use TSM
Select spooled file ASP
Select file
Select job name
Select user
Select user data
Size type
End interactive jobs
Delay
End time
hhmm, *NONE
Print system information
User profile
User ASP objects
Name, 2-32, *ALLUSR
Restore Authority using BRM
Parallel device resources
Minimum resources
Maximum resources
Set User Usage for BRM
User
Usage
Change Control Group
Folders to omit
Path name objects to omit
Use policy omit list
Print journal receiver report
Print Report using BRM
Report type
Time period for report
State
Start Media Balancing for BRM
Media priority
Number of media required
Recovery order list
Synchronization ID
Number of operations
Start save wait time
Multiple save synchronization
Source key store file
Translated key store file
Key store file
Use control group attributes
Package identifier
Recovery exit program
Save active option
Usage type
Recovery exit program data
Override recovery element
Recovery element override
Recovery element
Saved auxiliary storage pool
the IBM i Licensed Program from its distribution tapes,
using the procedure for restoring the IBM i Licensed Program
media as shown below.
media as shown below.
Depending on your recovery strategy, you may choose to use the
STRRCYBRM OPTION(*CTLGRP) ACTION(*RESTORE) command to restore
individual control groups.
Step 10: Apply journal changes
If journaling is used, journal changes should be applied to files
in user libraries.
To do so, run RSTAUT USRPRF(*ALL).
This operation requires a dedicated system and can be long running.
Step 9: Recover document library
You should restore the current version of your documents, folders and mail.
To do so, run STRRCYBRM OPTION(*ALLDLO) ACTION(*RESTORE) using media shown below.
Step 9: Recover document library.
Consider including *ALLDLO in a backup control group to save all
documents, folders and mail.
meida as shown below.
using media as shown below.
The following report is to be used in conjunction with the
Basic Backup and Recovery Guide, SC41-0036 ("Guide")
when recovering from failures.
When recovering from a disaster, refer to the section on
"Restoring the Entire System" in Appendix B of the Guide and
the details shown below to determine which recovery steps should be
taken and the media needed for each.
When disk failures occur, refer to the disk recovery cases listed
in the Guide under the chapter "Working with Disk Recovery" and
the details shown below to determine which recovery steps should be
taken and the media needed for each.
WARNING - Requires recovery from distribution media.
WARNING - Requires recovery from distribution media.
WARNING - Changes to recovery data not saved.
WARNING - User profiles not saved.
WARNING - Configuration data not saved.
WARNING - Requires recovery from distribution media.
WARNING - All user libraries not saved.
WARNING - Document library not saved.
as detailed in the Guide.
group which is routinely saved using STRBKUBRM.
you are recovering.
Use the Guide to determine when and how to perform this operation.
other recovery operations.
you need to restore the product from its distribution tapes.
QBRM and QUSRBRM libraries into backup control groups which
are routinely saved using STRBKUBRM.
the media shown below.
Container Management
Work with container classes
Work with containers
Display Media Activity
Display log
Media status
Media planning
Print inventory
Media Status
Display move exceptions
Print threshold analysis
Media Planning
Print projected media moves
Print media statistics
Print Inventory
Print all volumes in media library
Print active volumes
Print expired volumes
Print all volumes by expiration date
Print all media classes
Print all containers
Print all container classes
Print all locations
Archive
Archive planning
Perform archive
Display archive activity
Archive Planning
Work with control groups
Work with archive lists
Disclaimer:
Policy Administration
System policy
Backup policy
Archive policy
Recovery policy
Work with media policies
Work with move policies
System Policy
Change system policy
Work with sign off exceptions
Work with subsystems to check before IPL
Change network group
Change presentation controls
Change notification controls
Change IPL controls
Display log
Backup Policy
Change backup policy
Work with libraries to omit from backups
Display Archive Activity
Display log
Display archive exceptions
Work with archive save activity
Disclaimer:
Scheduling
Work with all BRM scheduled jobs
Work with all scheduled jobs
Disclaimer:
Disclaimer:
Disclaimer:
Backup Analysis
Retrieve disk space information
Print library analysis
Display backup analysis
Move Management
Run media movement
Confirm media to be moved
Print media movement report
Work with move policies
Functions
Move management
Display log
Work with expired media
Save BRM save files to tape
Schedule BRM maintenance
Restart subsystems
Work with job scheduler
Duplicate media
Work with active jobs
Work with spool files
Work with system status
Display system operator messages
Perform Recovery
Recover system
Recover auxiliary storage pool (ASP)
Recover control group
Recover library
Work with save activity
Work with saved objects
Work with saved folders
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
F3=Exit F4=Prompt F9=Command
F12=Cancel F13=Functions
F3=Exit F4=Prompt F9=Command F10=Edit option authority
The ILE C heap control structure has been corrupted.
The pointer parameter passed to free or realloc is not valid.
Attempt to allocate dynamic memory beyond user heap boundary with a call to malloc failed.
Mutex &1 failed to lock with reason code &2.
Mutex &1 failed to unlock with reason code &2.
The ILEC function has failed with an orientation error.
An unexpected failure occurred while converting data to a different CCSID.
Specified cell size is too large.
Specified cell size has been modified.
Extent size too large, number of cells reduced.
This routine should not be called within a shared activation group.
Mutex &1 failed to create with reason code &2.
Mutex &1 failed to destroy with reason code &2.
Signal SIGABRT raised (abnormal termination).
Signal SIGFPE raised (erroneous arithmetic operation).
Signal SIGILL raised (function image not valid).
Signal SIGINT raised (interactive attention signal).
Signal SIGSEGV raised (storage access not valid).
Signal SIGTERM raised (termination request).
Signal SIGUSR1 raised (user signal 1).
Signal SIGUSR2 raised (user signal 2).
Signal SIGIO raised (I/O error condition).
Signal SIGALL raised.
Signal SIGOTHER raised.
A domain error in a math function occurred.
A range error in a math function occurred.
Data was truncated on an input, output or update operation.
File is not opened.
File is not opened for read operations.
The ungetc function was called more than once.
Operation is not valid for device.
Cannot get a single character for files opened for record I/O.
File is not opened for write operations.
The stdin stream cannot be opened.
The stdout stream cannot be opened.
The stderr stream cannot be opened.
The positioning parameter in fseek is not correct.
The file name specified is not correct.
The type variable specified on the open function is not correct.
The position specifier is not correct.
There is no record at the specified position.
The function ftell cannot be used on a file opened for multiple member processing.
The value of the current record position is too large for ftell.
The argument supplied to the signal function is not valid.
Function parameter in the signal function is not set.
The file or library name does not exist.
Record is not found.
Operation was not permitted.
Message data is not valid.
The resource was busy.
Option specified is not valid.
File is not opened for update operations.
File is not opened for delete operations.
Number of characters written is less than expected record length.
An invalid length was specified for the key.
A read operation should not immediately follow a write operation.
A write operation should not immediately follow a read operation.
A non-recoverable I/O error occurred.
A recoverable I/O error occurred.
There is no error.
regexec() failed to find a match.
Invalid regular expression.
Invalid collating element referenced.
Invalid character class type referenced.
Last character in regular expression is a '\'.
Number in \digit invalid or in error.
¬
\( \) or ( ) imbalance.
\æ \å imbalance.
Expression in between \æ and \å is invalid.
Invalid endpoint in range expression.
Out of memory.
?, * or + not preceded by valid regular expression.
Invalid multibyte character.
¢ anchor not at beginning of regular expression.
Å anchor not at end of regular expression.
Unknown error occured during regcomp() call.
Unknown error occured during regexec() call.
Assertion failed: &1, file: &2, line: &3
Pool &1 (&2 bytes, &3 peak allocations, &4 free cells):
&1-&2 bytes: &3 allocations
Remaining allocations smaller than the largest cell size (&1 bytes):
New level of CSP/AE required for application.
&1 Date entered must be in the format &2.
Overflow occurred. Target item is too short.
REPLACE attempted without preceding UPDATE on &1.
Application and file record lengths not equal.
Allocation of table &1 failed.
Subscript value for operand &1 is not valid.
Subscript value &1 is not valid for operand &2.
A calculation caused a maximum value overflow.
Operand number &1 does not contain numeric data.
Test of fields on map &1 is not valid.
CALL to &1 failed due to an error.
Application &1 is missing a required parameter.
CALL application &1 only from another program.
&1 Data type error in input. Enter data again.
&1 Data too short. Enter at least &2 characters.
&1 Data not within defined range. Enter data again.
&1 Table edit error. Enter data again.
&1 Modulus check error on input. Enter data again.
&1 Data required in this field.
Division by zero attempted.
Maps require more storage than is allocated.
&1 Number of significant digits allowed exceeded.
Print map &1 does not contain valid map operators.
Delete attempted without preceding update.
Data not valid on a CHA to HEX move or compare.
Previous SQL request indicated SQL cannot continue.
&1 not valid hexadecimal data.
FOR value on MOVEA statement is not valid.
Mixed string not valid in MOVE operation.
Press Enter to continue.
Application &1 cannot run in batch mode.
Application updated to length of table &1.
Function not available -- CALL to &1.
Map &1 in map group &2 data not valid.
GETSTOR request length &2 offset &3 not valid.
A FRESTOR attempted on an area not allocated.
Error using map &1 in map group &2, PDN=&3.
Subscript for operand &1 not numeric data.
Map &1 not found in map group &2.
Internal processing error, PDN=&1.
Map &1 in map group &2 data not valid.
Map &1 in map group &2 has too many input fields.
Map group &1 generated at incorrect level.
Attempt to write to read-only user table &1.
Translation table &1 not found.
Commit issued for databases.
Rollback issued for databases.
Current key value.
A trace error ended application &1.
Trace started for application &1 in library &2.
File &1 in library &2, member &3, function &4.
A file I/O error occurred. See error message &1.
Statement &1&2
&1 to &2 in library &3.
Load of table &1 in library &2.
&1 Day &2 is not valid in month &3.
Application does not receive magnetic data.
&1 &2 is not a valid Julian date.
Source does not exist in this object.
Option selected not valid.
File &2 in library &1 record length not valid.
&1 of &2 objects created. Maximum severity &3.
Create objects running
CSP/AE action code not valid.
DDS source created. Use CRTLF or CRTPF to create files.
Program &1 in library &2 not a CSP/AE program.
QPAEPRT page width narrower than map group &1.
Command &1 ended successfully.
Error using map &1 in map group &2. PDN=&3.
Connected device type not supported.
Create CSP/AE User Message File command is running.
Too many files and tables open.
Application &1 does not match map group &2.
GETSTOR length &1 at offset &2 requested by program &3 for the purpose of &4
FRESTOR at offset &1 returned by &2 was used for &3.
From-file record length not correct.
Message file &1 in library &2 created.
User profile storage limit exceeded.
Press Reset, then Enter to continue.
Device input not valid. Value = &1.
Unload table &1 in library &2.
The from-file member contains no records.
Logical file format not valid.
Record number not valid numeric data.
File &1 in library &2 not a database file.
&1 &2 &3 &4
Enter Y or N.
Form length too small for file &1 in &2.
Map &1 in map group &2 contains DBCS data.
SQLMSG = &1
No second level help available
Return to application &1 in library &2.
No objects found to match name specified.
SQLERRD = &1,&2,&3,&4,&5,&6
Error occurred while processing file &1.
Error occurred while retrieving message.
Not authorized to group profile &1 for user &2.
Unable to open file &1 in library &2.
&1- Commitment control routine could not be issued.
&1- Implicit commitment control routine not issued.
EZEMNO value not valid.
Relative record key value is too large.
A previous error caused application to end.
Command &1 failed.
SORT/MERGE statement &1 out of order. Program terminated.
RELEASE statement &1 out of order. Program terminated.
RETURN statement &1 out of order. Program terminated.
Unexpected end of SORT/MERGE input at statement &1.
Statement &1 exceeds sort/merge capacity. Program ends.
SORT or MERGE statement number &1 encountered a fatal error.
Program &2 in library &3 cannot run in a multiple thread job.
Key too large in SORT/MERGE statement &1. Program ends.
GO TO statement &1 not altered. Program ended.
Generated code not at same level as runtime subroutines.
Parameter list for run time subroutine is invalid.
Program &1 not found.
Library &1 not found.
File &2 cannot be opened OUTPUT.
File description and actual file attributes incompatible.
Conversion error converting GDDM value to format specified.
Conversion error converting user value to GDDM format.
GDDM expects different data type in argument &1.
Not authorized to use program &4 in library &5.
The call to GDDM was not successful because GDDM was not installed.
Message &1 in &2 in &3 (C D F).
Enter type of dump desired (C D F).
Enter name of program to dump.
Message &1 at COBOL statement &2 (C D F).
Message &1 in called program &2 (C D F).
ACCEPT ATTRIBUTE-DATA statement has failed (C D F).
Enter type of dump desired (C D F).
Program &1 not found.
Message CPF9999 occurred in QCREXHAN. Dump attempt aborted.
&4 not cancelled by &2 as it was active.
&1 records read from &2 in &3 mbr &4.
&1 records written to &2 in &3 mbr &4.
&1 records released to sort/merge.
&1 records returned from sort/merge.
File &1 not opened OUTPUT. File is opened EXTEND.
File &1 not opened OUTPUT. File is opened EXTEND.
Default lock level for file &4 at low level(*CHG).
Device &4 not found. &5 used.
COBOL STOP literal in program &1 (C G).
&1 awaiting reply for position(s) &2 &3 &4.
&1
&1
&1 exception in program &2 in &3 at MI instruction number &4 COBOL statement number &5.
Last I-O operation was at statement &1.
&1 exception at COBOL statement &2 in program &3 in &4.
CBE7903-Information pertaining to file &1.
CBE7904-File is not open.
CBE7905-File is open.
CBE7906-Last I-O operation completed for file was &1.
CBE7907-Last file status for file was &1.
CBE7908-Format used for file was &1.
&1 exception in program &2 called from &3 in &4 at COBOL statement &5.
CBE7910-Last extended file status for file was &1.
Error &3 caused program &1 in &2 to end.
Device description &1 not found.
Device &1 not a cryptographic device.
Not authorized to device &1.
Device &1 not varied on.
Device description &1 is already allocated.
Device description &1 is not allocated.
Read/write operation failed for PKA key store file &1 in library &2.
Out of resources for PKA key store file &1 in library &2.

Length: 517147 Date: 20200927 Time: 045651

Count: 2810     sap01-206 ( 2871 ms ) This documentation is copyright by IBM.