OS/400 Messages

Are you looking for the description of OS/400 (System i) messages e.g. CPF9801? Then you have come to the right place. Below you can see a (hoefully) complete list of of all OS/400 messages with all “second level texts”.

Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43


Complete OS/400 Messages Documentation From CPD0904 up to CPD28A1

Complete OS/400 Messages Documentation From CPD0904 up to CPD28A1

This documentation is copyright by IBM.
Count: 1433 Skipped: 0
OS/400 Messages
Description
Relative day of the month is required.
Alert controller description &1 not found.
Cannot allocate alert controller &1.
Relative day of the month value cleared in job schedule entry.
Cannot use DLY and RSMTIME parameter together.
Specify RESTART(*YES) when ADRRGN(*ALL) or ADRRGN(*TEMP).
Values conflict with existing device descriptions.
Error on Node type or Alert default focal point.
Printer device &1 not found.
Specify either DEV or RMTLOCNAME, but not both.
Program specified must be QCMD.
Values conflict with remote location list.
Changes not allowed when APPC controllers varied on.
Changes not allowed when IDLC or T2.1 X.21 Short Hold Mode lines varied on.
RSCAFNGRP(*YES) not allowed with THDRSCAFN(*NOGROUP).
Job will not be submitted every month.
Error occurred for omit date.
One or more jobs not submitted while entry was held.
*ALL for schedule day only valid with *WEEKLY frequency.
*MONTHSTR or *MONTHEND not valid with *WEEKLY frequency.
*NONE must be specified for one of schedule date or day.
*ONCE not valid with more than one schedule day.
Relative day of month needs schedule day and *MONTHLY.
Omit date not valid with *ONCE for frequency.
Save only valid with *ONCE for frequency.
PRTFMT can only be specified with OUTPUT(*PRINT).
No jobs ever submitted for job schedule entry.
Unexpected error occurred while processing job schedule entry &3 number &4.
Cannot restore job schedule &1 to library &2.
Job schedule &1 in library &2 is full.
Cannot determine job queue for entry &3 number &4.
QJOBSCD system job not active.
Option not valid for &1.
SYSTEM(*RMT) not allowed.
String &1 not found.
Column not valid.
No find performed previously.
Specified value not allowed.
INLJOBS must be less than or equal to MAXJOBS.
ADLJOBS must be less than MAXJOBS.
INLJOBS must be greater than or equal to THRESHOLD.
Prestart job entry for program &1 in &2 does not exist.
Prestart job entry exists for program &1 in library &2.
Values for jobs using CLS must be equal to MAXJOBS.
Value specified for USER parameter is not correct.
System classes cannot be changed.
Not a valid subsystem for this command.
CFGSTG(*YES) may only be specified if RESTART(*YES) is also specified.
IPLSRC(*IMGCLG) may only be specified if RESTART(*YES) is also specified.
BCHTIMLMT may only be specified if SBS(*ALL) is also specified.
Specify image catalog with IPLSRC(*IMGCLG).
Specify IPLSRC(*IMGCLG) with image catalog.
Lock scope *LCKSPC not valid for object &3.
Cannot use &3 &1 in library &2.
Information displayed is not complete.
Cannot specify Thread ID to include without OUTPUT(*PRINT) and OPTION(*PGMSTK).
Daylight Saving Time start cannot equal end.
Specify Standard Time message with STDNAME(*MSG).
Specify Daylight Saving Time message with DSTNAME(*MSG).
Specify message file with STDNAME(*MSG).
Specify message file with DSTNAME(*MSG).
Specify STDNAME(*MSG) with Standard Time message.
Specify DSTNAME(*MSG) with Daylight Saving Time message.
Specify STDNAME(*MSG) or DSTNAME(*MSG) with message file.
Cannot specify Daylight Saving Time start with DSTNAME(*NONE).
Cannot specify Daylight Saving Time end with DSTNAME(*NONE).
Must specify both DSTSTR and DSTEND.
An unexpected error occurred while converting a time stamp.
Cannot specify Daylight Saving Time shift with DSTNAME(*NONE).
An error occurred while converting a time stamp to UTC.
Network server description &1 could not be accessed
Line description associated with network server description &1 could not be accessed
Statistics could not be collected from network server &1
Performance monitor running with time problem &7 - the system clock may have been changed.
Performance statistics not reported for some ending threads.
FROMTIME not within range of collection.
TOTIME not within range of collection.
TOTIME before FROMTIME.
Collection object has no data for &1.
Category &1 not supported.
No active collection.
*ACTIVE end date allowed only with active collection.
Active collection ended before requested end time.
*ACTIVE mode ended abnormally.
Unable to complete request for *ACTIVE data.
Unable to create data from collection &1 in &2.
Unable to create data in library &1.
Unable to create data in file &1.
No interval data for category &1.
No data for category &1.
Data creation from category &2 ended abnormally.
Cannot collect PEX data for definition &1.
Internal error detected for category &3.
Collection of &1 performance data has stopped.
If DMPTRC(*YES) specified, MBR parameter required
Specified parameters only valid when DMPTRC(*YES) specified.
Error when submitting secondary job for user-defined category &1.
Contact lost with secondary job for user-defined category &1.
Contact lost with collector job for user-defined category &1.
Not able to run data collection program for user-defined category &1.
Java exception not handled for user-defined category &1.
Data collection program for user-defined category &1 failed.
Data collection program for user-defined category &1 exceeded collection time limit.
Data collection program for user-defined category &1 failed.
Program exception not handled for user-defined category &1.
No response from LPAR data extension.
PM Agent is active.
Resource &1 does not match what was expected.
Resource &1 not found.
A system resource required by this job is held by another job.
Parameter OUTFILFMT not allowed.
LINETYPE parameter can only be specified with TYPE(*LAN).
OUTFILFMT(*TYPE2) required when TYPE(*AHW) and OUTPUT(*OUTFILE) are specified.
Only one new label may be selected.
Information for resource &1 not complete.
Description object &1 is currently varied on.
Error occurred accessing System Resource Manager object.
Error occurred creating &1 space object.
Error occurred accessing file &1 in library &2.
Hardware resource information is incorrect.
Function check occurred during device configuration.
Tape switch setting has already been assigned.
Tape device &1 cannot be processed.
Resource was not changed.
Program &6 not found in library &5.
Error in CHKPRDOPT.
Program &6 in library &5 does not match product load.
Library &5 not found.
Library &5 damaged.
Language &5 not installed.
*&7 &6 in library &5 damaged.
Licensed program operation not complete.
Library incorrectly renamed.
Product primary language does not match system primary language.
Folder &8 damaged.
Product &1 release &2 option &3 load &4 not correctly installed.
Product &1 release &2 option &3 load &4 not correctly packaged.
Error in converted product.
Error occurred during installation of product.
Product &1 release &2 option &3 load &4 changed during CHKPRDOPT.
Object problem in product &1 release &2 option &3 load &4.
Object damaged in product &1 release &2 option &3 load &4.
Program &6 in library &5 damaged.
Multiple code loads defined for product &1 release &2 option &3.
Language &5 in error.
Product &1 release &2 option &3 load &4 not compatible.
Coded character set identifier (CCSID) conversion error.
Primary language of operating system is not valid.
Option &3 of product &1 release &2 not valid when *BASE is release &5.
Release &5 of &1 *BASE not valid with release &2 of &1 option &3.
*PRDDFN not found for product &1.
Component not found.
Remove function is not valid.
Directory name was not specified.
File name was not specified.
Element or attribute not found.
Directory entry was not found.
File name entry was not found.
Component not removed.
Function not allowed for a packaged product.
Component not updated.
Length not valid for attribute or element.
Attribute value not valid.
ValueName attribute was not specified.
Component already registered.
Specified component is not registered.
Multiple matches found for the component.
Component does not have any registered directories.
Directory does not have any registered file names.
&1 files were deleted successfully.
A file could not be deleted.
Error at line &1, column &2.
Product load no longer installed.
Object &1, type and subtype &2, in library &3 not found on system.
Object &1, type and subtype &2, in library &3 is damaged.
Unsigned object limit exceeded for product &1 option &2 release &3.
Unexpected error during digital signature verification on &1 object &2 in library &3.
Firmware product already exists.
SET parameter not allowed when PGM(*PRVINVLVL) specified.
Change to &1 only allowed for interactive jobs.
Not enough storage for shared pool.
*WRKSTN only allowed for interactive
Pool &1 minimum size percentage will not be used.
Sum of minimum pool size percentages greater than 70%.
Start job log server command not allowed now.
Job queue held or not allocated by an active subsystem.
Job log server not active.
Job log server is already ending controlled.
An error occurred with the job log server.
Job log server already active.
Cannot use both CMD and RQSDTA on SBMJOB command.
Cannot use RQSDTA(*RTGDTA) and RTGDTA(*RQSDTA) parameters together.
Cannot use RTGDTA(*RQSDTA) and RQSDTA(*NONE) parameters together.
Environment variables not copied.
Path name too long.
Display message option not allowed.
Event mask state not valid.
Subsystem description &1 not found in library &2.
Not authorized to subsystem description.
Subsystem description &1 not found in library list.
Subsystem description &1 not found.
Subsystem description &1 not found.
Subsystem description &1 not found.
Subsystem description &1 in library &2 already exists.
Cannot allocate subsystem description &1 in &2.
Subsystem description &1 in library &2 recovered.
User profile storage limit exceeded.
Error occurred during subsystem description allocation.
Command not valid when subsystem description active.
Time ended on wait for response from active subsystem.
Subsystem ending.
Subsystem encountered function check.
Previously requested change pending for subsystem description.
ASP group not changed.
Work station entry already exists for work station &1.
Work station entry does not exist for work station &1.
Device type of device &1 is not correct.
Specify either WRKSTN or WRKSTNTYPE, but not both.
Device &1 not found.
Not authorized to device &1.
Device &1 damaged.
Prestart job entry &1 in &2 cannot be removed.
Work station type &1 already exists.
No entry exists for work station type &1.
Job queue entry &1 in &2 cannot be removed.
Communication entry &1 &2 cannot be changed.
Object not found.
Job description &1 found in temporary library.
Job description &1 was not found in library &2.
Not authorized to job description &1 in library &2.
Job description &1 not found in library list.
Job description &1 not found.
Job description &1 not found.
Job description &1 not found.
Autostart job entry already exists for job &1.
Autostart job entry does not exist for job &1.
Program &1 was found in temporary library.
Program &1 was not found in library &2.
Routing entry &1 cannot be removed.
Work station entry &1 cannot be removed.
Communication entry &1 &2 cannot be removed.
Console entry cannot be removed.
Console entry cannot be added or changed.
Program &1 not found in library list.
Program &1 not found.
Program &1 not found.
Program &1 not found.
Communication entry &1 &2 has been updated.
Routing entry sequence number &1 already exists.
Routing entry with sequence number &1 does not exist.
Class &1 was found in temporary library.
Class &1 was not found in library &2.
Class &1 not found in library list.
Class &1 not found.
Class &1 not found.
Class &1 not found.
Compare value conflicts with routing entry &1.
Compare value or starting position not correct.
Routing entry with compare value of *ANY already exists.
Sequence number not correct.
Sequence number not correct.
Activity level cannot be specified for shared pool.
Pool identifier &1 specified more than once.
Cannot specify activity level with *NOSTG.
Cannot specify activity level with *BASE.
Activity level not specified with storage size.
Pool definition &1 was not removed.
Pool definition &1 does not exist.
Pool definition &1 not added.
Pool definition &1 not removed.
Job queue &1 found in temporary library.
Job queue &1 not found in library &2.
Job queue &1 not found in library list.
Job queue &1 not found.
Job queue &1 not found.
Job queue &1 not found.
Entry exists for job queue &1 in library &2.
Job queue entry for job queue &1 in &2 does not exist.
Job queue entry sequence number &1 already exists.
File &1 found in temporary library.
File &1 not found in library &2.
No authority to file &1 in library &2.
File &1 not found in library list.
File &1 not found.
File &1 not found.
File &1 not found.
File &1 in library &2 not device file.
Record format &3 not found.
File &1 in library &2 not accessible.
Pool identifier &1 not defined in subsystem description.
Text not changed because subsystem description active.
User profile &1 was not found.
No authority to user profile &1.
Value specified for DFTUSR parameter not correct.
Device type for device &1 was not correct.
Device &1 not found.
Not authorized to device &1.
Device &1 damaged.
Mode entry not found in device &1.
Communications entry already exists.
No communications entry exists.
Mode &2 not found in device &1.
Communications entry already exists.
Communications entry does not exist.
Communications entry already exists.
Communications entry does not exist.
Mode parameter must be *ANY.
Job description &1 not found in library &2.
Not authorized to job description &1 in library &2.
Job description &1 not found in library list.
Job description &1 not found.
Job description &1 not found.
Job description &1 not found.
Job description &1 in library &2 already exists.
Not able to allocate job description &1 in &2.
User profile storage limit exceeded.
User profile &1 not found.
Not authorized to user profile &1.
Value specified for USER parameter not correct.
Value specified for INLASPGRP parameter not correct.
Job queue &1 found in temporary library.
Job queue &1 not found in library &2.
Job queue &1 not found in library list.
Job queue &1 not found.
Job queue &1 not found.
Job queue &1 not found.
Initial search list library &1 not found.
Library name &1 appears more than once in INLLIBL.
Job description cannot be saved for &3.
Output queue &1 found in temporary library.
Output queue &1 not found in library &2.
Output queue &1 not found in library list.
Output queue &1 not found.
Output queue &1 not found.
Output queue &1 not found.
Authority verification to CHGACGCDE command failed.
Cannot use RTGDTA(*RQSDTA) and RQSDTA(*NONE) together.
Cannot use RTGDTA(*RQSDTA) and RQSDTA(*RTGDTA) together.
Job switches &1 not valid.
User not authorized to change system library list entry.
Authorization list &1 does not exist.
Value &3/&2/&1 not allowed for Submit For (SBMFOR) parameter.
Not authorized to use submit for (SBMFOR) parameter
Range of parameter PGMNBR does not include value entered.
Number of entries not in valid range
QCENTURY value conflicts with QYEAR value.
User not authorized to change system value &1.
Service processor unable to change IPL attribute.
User not authorized to change ASP group.
Service processor failed.
Must have *ALLOBJ authority to do requested operation.
Job changed successfully; however errors occurred.
Error occurred while changing home directory.
Network attribute DFTNETTYPE has been changed to &2.
Parameters not valid with SET specified.
&1 in &2 not found.
&1 in &2 found in an independent ASP.
Initial library list conflict.
ASP group &1 not correct.
&1 not primary ASP device.
ASP device &1 is full.
System value &1 not changed.
Change to system value &1 not done.
QTIMZON has been set to the default value QWCDFTTZ.
Local system time has been adjusted.
&1 in &2 not found in ASP group &7.
System value &1 not changed.
Segment indicator not valid.
User exit program &1 started.
User exit program &1 completed.
Change to system value &1 not done.
Change to system value &1 not done.
Combined number of commands and messages for job is greater than maximum allowed.
Cannot restore output queue &1 in library &2 because writer &3 active.
Cannot restore output queue &1 in library &2. Output queue in use.
Either an ASP number or ASP device must be specified.
Balance type must be specified.
An ASP number or an ASP device name must be specified.
No ASP number or ASP device or unit number may be specified.
Unit number must be specified.
A time limit must be specified.
Balance type must be specified.
No unit number may be specified.
No ASP number or ASP device may be specified.
Disk balancing detected an error for ASP &2 with name &3.
No ASP matches the ASP selection parameters.
ASP &1 is not a geographic mirror copy.
Vary status is not valid for ASP &1.
Variable contains invalid decimal data.
Pointer to be displayed not set to any address.
Floating-point value displayed is not exact.
Object not found for system pointer with initial value.
Variable not found for data pointer with initial value.
Variable to be displayed contained in deleted object.
Variable refers to object with freed storage.
Space addressing error for variable.
Pointer alignment error. Pointer not on 16-byte boundary.
Breakpoints, step, or statement traces changed.
High-level Language (HLL) pointer invalid.
START plus LEN values exceed length of string.
Current length of varying-length string invalid.
Space addressing error for variable.
Pointer addresses a deleted object.
Trace statement or instruction already run. No values recorded.
End request is not valid for this job.
Unmonitored exception occurred while running JAVA.
CPD1920 TID &1 &7 - location stopped (event data)
CPD1921 TID &1 &6 - location stopped (MATSSPP) &5 - module stopped
Internal error accessing thread debug information. Return code: &3.
CPD1923 TID &1 &2 events stacked
STRDBG is not allowed because job is already in debug mode.
STMT(*) cannot be used with PGM parameter.
STMT parameter required if PGM parameter specified.
STMT parameter cannot be used with PGM(*ALL).
PTRTYPE(*SYP) not valid with ADR or OFFSET parameter.
Only one of the SYSOBJ, ADR, or OFFSET parameters is allowed.
OBJTYPE required if SYSOBJ value not (*NULL).
OBJTYPE parameter cannot be used with SYSOBJ(*NULL).
Only DTEPORT(A) is allowed for selected test.
Cannot specify address for RMTDCEADR with OPTION(*CALL).
RMTDCEADR requires an address.
DCERTY(*YES) not valid with OPTION(*CALL) or OPTION(*DSC).
CONTACT parameter required with OPTION(*CONTOPER).
SPEED parameter required with OPTION(*SETSPEED).
Unable to display module.
Specified module list not found.
First name of student is required.
Course ID required.
The specified module cannot be found in the course library.
Cannot remove bookmark for student &1.
Duplicate module ID specified.
Associated file does not exist.
Associated folder does not exist.
Module ID required.
Module title required.
PC indicator not correct.
Course ID cannot contain blanks.
Module ID cannot contain blanks.
Incorrect value.
More than 6 associated files selected.
Module &1 not added.
Course &1 not added.
Language ID not valid.
Display station does not support IGC data.
Unexpected error encountered while attempting to enroll in course
Unexpected error encountered while attempting to remove course
Module can only be displayed on a personal computer.
Module presentation ended abnormally.
Cursor position not valid for F10.
Sequence number must be between 1 and 9999.
Audience path cannot be used at this time.
At least one associated file must be specified.
Audience path ID reserved.
Sequence number used more than once.
Specified audience path ID already exists.
Course-supplied audience path cannot be changed or removed.
Audience path in use.
Audience path ID required.
Audience path title required.
Audience path ID cannot contain blanks.
Course ID required.
Alphabetic character found in sequence field.
The specified course ID cannot be found.
The specified audience path ID cannot be found.
Option not specified.
Course library &1 can not be found
Operation not completed.
Course title required.
Specified description member does not exist.
Type only one option one.
Specified course ID already exists.
Specified course library does not exist.
Course ID must be specified.
User &1 already enrolled in education.
No online education courses available.
Specified user ID not found.
At least one module must be selected.
Audience path ID required.
User ID required.
Error occurred while attempting to access folder.
User not authorized to access shared folders
A course must be selected to continue.
An audience path must be selected to continue.
Last name of student is required.
Course &1 currently not available.
Unexpected error occurred while attempting to convert course.
Translation table &1 in library &2 not found.
Language ID &3 not valid for file &2 in course &1.
Course &1 already converted using language ID &2.
Course library &1 does not exist.
Course &1 partially converted.
Course library &1 not converted.
Duplicate associate file name entered.
File &2 in course library &1 is not a package file.
&1 courses successfully converted. &2 courses unsuccessful.
Unable to display module.
Next power on or off may not be scheduled.
Press F16 to confirm or F12 to cancel.
Value must be 1 through 7.
Value must be a number 0 through 60.
DAYS parameter not allowed with OUTPUT(*).
MSGINTRVL is only allowed when DAY(*ALL) is specified.
*DFT cannot be specified as a power on or off time.
DAYDESC only allowed when changing a specific date.
Default for this day is no power on or power off.
Date must be today or a date in the future.
Your request has not completed yet.
Could not get next scheduled power on date and time.
Value must be 1 through 366 or *KEEP.
Cannot get information from controller &1.
&1 already available.
Not all devices displayed.
&1 already unavailable.
Not all devices displayed.
Job on device &6 not waiting for specific message.
&1 backup options changed, but messages issued.
No messages for printer &1.
No messages for printer output &1.
Printer &1 cannot be restarted now.
Printer &1 not found.
Not authorized to printer &1.
Printer &1 already stopped.
Printer output &1 already printed or deleted.
Printer &1 already started.
Printer output &1 already released.
Error occurred. Output &1 options not changed.
Not authorized to printer output &1.
Not authorized to printer &1.
First page greater than total pages.
Last page greater than total pages.
First page greater than last page.
Printer output &1 already released.
Printer output &1 already held.
Cannot release printer output &1, held by job.
Specify printer name.
Not authorized to move printer output.
Cannot move output ahead of other users' output.
Page to restart on not allowed.
Unable to display printer output &1.
Specify user name.
Printer &1 no longer exists.
User &1 not found.
Tape device &1 does not exist.
Tape volume name &1 is not valid.
Not able to use tape device &1.
Option 1 selected more than once.
Error while building list. List may be incomplete.
Tape not readable and not initialized.
Device &1 damaged.
Library backup list damaged. Use F5 to rebuild.
Folder backup list damaged. Use F5 to rebuild.
Cannot change Find field and select options.
Cannot change Find field and press certain function keys.
Number of first tape greater than number of last tape.
New tape volume not mounted in tape drive.
User &1 not authorized to backup options.
Not authorized to user profile &1.
User &1 not authorized to folder backup list.
Password for &1 and verify password do not match.
Could not access system values.
Value must be 1, 2, 3, or 4.
Value must be YMD, MDY, DMY, or JUL.
Value must be 10, 20, 30, 40, or 50.
Value must be 1, 2, or 3.
Some passwords for IBM-supplied users not changed.
Device is not a printer.
Could not change system options. Try again.
Value must be 1 or 2.
Value must be 2 or 3.
Value must be 1, 2, 3, 4, or 5.
No backup history information found.
Option 3 selected more than &1 times.
Cannot change Find user field and select options.
Cannot change Find display station field and select options.
Cannot Page up or Page down and change User field.
Cannot change User field and select options.
User field cannot be blank.
User field cannot be blank.
Cannot change User field and press certain function keys.
Cannot change Find user field and press certain function keys.
Cannot change Find display station field and press certain function keys.
Display station field cannot be blank.
User &1 not found.
Display station &1 not found.
List of signed-on users is incomplete.
Values were not specified for Day and Time.
Values were not specified for Occurrence and Time.
Values were not specified for Day and Occurrence.
A value was not specified for Time.
A value was not specified for Day.
A value was not specified for Time.
Not authorized to change backup schedule.
Backup schedule will not be updated.
Object &1 cannot be inserted in &2 library.
Occurrence of day in month must be specified.
Occurrence of day in month cannot be specified.
Backup must be specified.
Backup Time must be specified.
Value must be 1, 2, 3, 4, or *LAST.
Value must be 1 through 24 or *NOMSG.
Value must be *DAILY, *WEEKLY, *MONTHLY, or *WEEKMONTH.
Value must be N if no times are entered for the schedule.
Load tape &1 into tape drive &2.
Value must be 1, 2, 3, 4, or 5.
Value must be 1 through 7.
A value was not specified for Date.
A value was not specified for Time.
A value was not specified for Day.
A value was not specified for Occurrence.
Report type *FLR only valid if *SYSBAS specified for ASP device.
LIB parameter can only be used with RPTTYPE(*LIB).
OWNER parameter can only be used with RPTTYPE(*OWN).
OBJ(*NONE) cannot be used with RPTTYPE(*OBJ).
FLR parameter can only be used with RPTTYPE(*FLR).
DOC parameter can only be used with RPTTYPE(*FLR).
OBJ parameter cannot be used with RPTTYPE(*FLR).
No other parameters can be used with RPTTYPE(*SYS).
OBJTYPE parameter cannot be used with OBJ(*NONE).
Sort value cannot be used with report type.
Number of files exceeds maximum allowed.
File &1 already exists in library &2.
Specified path name not valid.
No other parameters can be used with RPTTYPE(*DIR).
Sort value cannot be used with report type.
Sort value not valid.
You can only select one report type at a time.
Size cannot be negative.
Job CCSID is 65535.
User &1 not authorized to device &2.
Device &1 not used.
Value must be 1 through 99.
No folders selected for backup.
Exit program &2/&1 not available.
Exit program &2/&1 not available.
Unexpected error from exit program &2/&1.
Job description &2/&1 not available.
Not authorized to device &1.
User &1 not authorized to run backup.
Devices &1 and &2 not the same type.
Exit program &2/&1 not found.
Object type not valid.
Cannot specify *ALL with another object type.
Duplicate object type not allowed.
Object type not specified; defaulted to *ALL.
Not authorized to &1 command.
User &1 not authorized to &2 command.
User profile &1 not found.
Function parameter &1 not valid.
Program call parameter value &1 not valid.
Restore Library &1 or language ID &2 is not valid.
Error occurred during installation of product license keys.
Storage limit exceeded for user profile &4.
Option not allowed for QTEMP of another job.
Cannot clear system library.
Object &1 in &2 type *&3 already exists.
Specify OBJTYPE(*FILE) when specifying SYSTEM.
Not authorized to &1 type *&4 in &3.
Not authorized to authority holder &1 in &2.
File &1 in &2 not a program defined file.
Not authorized to &1 type *&3 in &2.
File &1 in library &2 cannot be duplicated to library &3.
Library QRCL and QRPLOBJ can only be created in system ASP.
Information lost for object &2 in &1 type *&3.
Information lost for all objects in &1.
Recovery of library &1 failed.
Library QTEMP already exists.
Cannot add new objects to library &1.
Object &1 type *&2 cannot be created into library QTEMP.
Object &1 in &2 type *&3 not deleted.
Cannot delete system library.
Object name cannot be used for rename.
Object *ALLUSR or *IBM allowed only if object type is *LIB.
Member (MBR) parameter allowed only with data base file.
Library cannot be reclaimed.
ASPDEV value not valid with FROMLIB value.
TOASPDEV value not allowed with TOLIB(*CURLIB).
Value for ASPDEV not valid with special value for LIB.
Entry &1 not in EPT.
System user profile cannot be changed.
Parameter cannot be changed for QSECOFR.
REFOBJTYPE(*OBJTYPE) and OBJTYPE(*ALL) cannot be used together.
Reporting of errors stopped; message limit reached.
User profile cannot be deleted.
Private authorities not restored.
Password value cannot be *NONE for security officer (QSECOFR) user profile.
Password cannot be set to expired.
Specify either USRPRF or OBJ.
Data authority value *AUTL only valid when *PUBLIC specified on the USER parameter.
Specify either AUTL or USER.
Object authority value must be *NONE.
DTAAUT and OBJAUT cannot be *NONE when USER is *PUBLIC.
DTAAUT and OBJAUT cannot be *SAME when USER is specified.
The REPLACE parameter cannot be specified with AUTL or REFOBJ.
OUTPUT(*OUTFILE) cannot be specified with AUTTYPE(*ALL).
AUTTYPE parameter value must be *OBJECT.
X.509 certificate for user &1 removed.
USREXPDATE or EXPDATE parameter not allowed for a system user profile.
OBJ must be specified with SUBTREE.
Parameter OUTFILE required.
USREXPITV parameter can only be specified with USREXPDATE(*USREXPITV).
User expiration interval (USREXPITV parameter) is required.
Authorities not revoked from user profile &4 for object &1 in &3 type *&2.
Authority not revoked from user profile &4 for object &1 in &3 type *&2.
Specify either AUTL, USER, or REFOBJ.
Input values REFOBJTYPE, USER, and AUTL cannot be used together.
Input values AUT, AUTL, and REFOBJ cannot be used together.
New owner required.
Only one type of user can be selected.
User profile name not allowed for this command.
User profile not allowed to be a group profile.
User profile not allowed to be a member of a group.
Group profile &1 removed from user profile &2.
User profile name specified on both USRPRF and GRPPRF values.
Group information for user profile &1 not restored.
User profile &1 no longer member of group &2.
Object QTEMP is not allowed.
Group profile information for user profile &1 not restored. Reason Code &2.
Group information for user profile &1 not restored.
User profile not allowed to have a GID.
User profile name not allowed for this command.
*NOQTEMP cannot be specified by itself.
Profile &2 removed from group list.
Value for OWNER or GRPAUT parameters not correct.
Authority may not be changed for object &1 in &3 type *&2 for user &4.
User names QPSR and QCE cannot be used as user profile names.
&1 password attempts not valid.
USRCLS, SPCAUT, MAXSTG, PTYLMT, STATUS, and MSGQ parameters cannot be changed for QTCM.
Security active value &1 not valid.
User &2 already on list &1.
User &1 does not exist.
Function not performed for user &2 on list &1.
User &2 not changed.
User &2 has not been removed.
*AUTL authority was not revoked from *PUBLIC.
SPCAUT cannot be changed for QSRV user profile.
PASSWORD cannot be changed.
Duplicate password control of &1 not valid.
Expiration interval of &1 not valid.
List of restricted characters '&1' not allowed.
Minimum password length conflicts with maximum length.
Limited characters and required digit values conflict.
Journal QAUDJRN in library QSYS not found.
Journal QAUDJRN in library QSYS in error.
Not able to allocate journal QAUDJRN in QSYS.
Value specified for data authority field not permitted.
File &1 in library &2 cannot be used as the reference.
Password level of &1 is not valid.
Password level change from &1 to &2 is not valid.
Maximum password length is too large for password level.
Minimum password length is too large for password level.
Password level &1 conflicts with password validation program value.
QPWDLMTCHR system value is ignored at password level &1.
Password rejected by program &1 in library &2.
Other authority specified with *EXCLUDE not allowed.
Either the USER or AUTL parameter must be specified, but not both.
Value specified for object authority field not permitted.
Value specified for authority field not permitted.
Specific authorities used for user &1.
Specified value *GROUP not allowed.
*ADOPTED authority cannot be changed.
Authority for user &1 not changed.
User &1 not added; authority already exists.
User not authorized to change authorization list.
Ownership may not be changed for object &1 in &3 type *&2.
Authorization list securing &1 in &3 type *&2 not changed.
Value for exit sign-on request field not allowed.
TYPE and OUTPUT values not valid with USRPRF(*ALL).
User &1 not added; no authority specified.
The AUT and AUTL parameters cannot be specified together.
The OBJAUD and AUDLVL parameters cannot both specify *SAME.
Value for SUPGRPPRF parameter is not correct.
Cannot add field level authority for user profile &1.
Errors encountered while processing object.
The USER and USAGE parameters were not both specified.
Value &1 already included in value &2.
Values in QAUDLVL2 will be ignored.
Audit value &1 is a duplicate.
Usage setting not valid for user &1.
Usage setting not changed for user &1.
Attributes not reset for user profile &1, reason code &2.
Use of Java not allowed.
Check signature value must be *ALL.
System value &1 was not changed.
QPWDLVL value &1 conflicts with QPWDRULES value &2.
QPWDRULES requires *MAXLENnnn of at least &1.
QPWDRULES value &1 conflicts with value &2.
QPWDRULES value &1 conflicts with values &2 and &3.
QPWDRULES *DGTLMTFST value assumed.
Valid password cannot be formed with specified values.
ASPDEV parameter not allowed.
No authority to use system request functions.
DLTOPT(*DLT) required if EXITPGM(*NONE) specified.
Options 10, 11, 13, 14 and 15 are allowed only when pass-through or TELNET is active.
Options 10, 11, 13, and 14 are allowed on a pass-through or TELNET Intermediate or End system only.
Option 80 is not allowed on a pass-through or TELNET End system.
Option 15 is not allowed on a target or pass-through END system.
New password cannot be same as current password.
New password and verify password not the same.
Current password not correct.
*WRKSTN cannot be used for the MSGQ value in batch environment.
Options 1, 2, or 90 not allowed.
Option 20 not allowed.
Library QTEMP is not allowed.
Library &3 not found.
&2 is not a valid object type.
No items of type &2 in list.
No items of type &2 in library &3 in list
No position to performed previously
Object name required for this option
Cannot position empty list.
Cannot disconnect another job using System Request key.
Option 12 not allowed.
Option 50 not allowed.
More than one type was selected.
Size of message queue &1 in &2 is not correct.
Message queue &1 in library &2 is logically damaged.
Number &1 no longer references a valid reply list entry.
Unable to allocate reply list for number &1.
FMT required for variable specified in ALROPT parameter.
Reply to message not valid. Reply was &1.
No message identifiers exist in range (&1 &2).
A message queue name must be specified.
Specified message type not valid with specified program message queue.
If SENDERFMT is *LONG, MSGQ must be *PGMQ or blank.
SENDERFMT cannot be specified without SENDER parameter.
A delayed CCSID conversion has failed.
A CCSID conversion error occurred.
OUTPUT(*OUTFILE) can only be used for the job in which the command is used.
Null string not valid on RPY or CMPDTA parameters.
If MSGTYPE is *INFO, MSGRPY is not allowed.
If MSGRPY is not specified, DFT is not allowed.
If MSGRPY is not specified, VALUES is not allowed.
Creating system message queues not allowed.
Data queue &1 not restored. Data queue exists in library &2.
Reply to messages not allowed.
Not allowed to delete messages.
Not authorized to reply to messages.
Not authorized to delete messages.
Output file &1 member &3 moved or renamed.
Error occurred on file &1 member &3 in &2.
Job log file &1 member &3 in &2 has been deleted.
Job log file &1 member &3 in &2 is not available.
No records written to job log file &1 member &3 in &2..
Not all records written to job log file &1 member &3 in &2.
Error occurred during problem analysis.
Message selected does not allow work with problem.
Problem analysis already done for the message.
Cannot change characteristics of message queue.
Cannot display messages in a multiple-requestor terminal job.
MSGKEY cannot be specified with MSGTYPE(*FIRST) or MSGTYPE(*LAST).
Value for exit field not allowed.
Problem record currently in use by another job.
Only one message queue allowed for *INQ and *NOTIFY type messages.
Message data start value not valid without compare data.
Error occurred during work with problems.
Message data truncated for message key &7.
Message list has changed. Press F5 to refresh.
Message no longer exists. Press F5 to refresh.
Allow alert parameter must be *YES for QHST.
When FMT parameter is *CCHAR the length must be *VARY.
If PGMQ(*ALLINACT) is specified, CLEAR(*ALL) must also be specified.
CLEAR(*BYKEY) and MSGKEY parameters are mutually dependent.
If MSGTYPE has *NEXT or *PRV specified, MSGKEY is required.
If RPYMSGQ parameter specified, MSGTYPE(*INQ) required
Too many messages of same type sent to message queue.
Too many messages of same type sent to program &2.
If MSGF or MSGID parameter specified, both required
Message has already been replied to by another user.
When MSG parameter used, MSGF, MSGID, MSGDTA not allowed.
Function can not be performed for both PGMQ and MSGQ.
Reply already typed for message by another job.
Message queue was extended.
Message queue could not be extended.
Reply typed for message not allowed.
Message queue is being used by another job.
Reply cannot be displayed for the message.
Cannot display additional message information.
If MSGKEY is *TOP or X'00000000', MSGTYPE must be *NEXT or *PRV.
Reply to message not allowed.
The requested information cannot be dumped.
Recursive CPF2524 loop detected in program &1.
CCSID parameter cannot be changed when only changing one of the text paramet ers.
Value for parameter &1 is incorrect.
RMVEXCP parameter cannot be specified with the MSGQ parameter.
Length of field not valid.
Message file not saved for release &3.
No messages in specified time period.
Message file not saved for release &3.
Not authorized to add or remove exit program.
Reply rejected by a reply handling exit program.
Reply replaced by an exit program is not valid.
Reply replaced by an exit program same as original reply.
Reply handling exit program requested to replace a reply value.
MSGID parameter is needed.
Reply marked '>' was replaced by exit program.
MSG parameter required if MSGTYPE(*RQS) specified.
Deleting message queue QSYSOPR with DLTMSGQ command not allowed.
If RANGE specified, MSGID(*RANGE) required.
OUTPUT(*APIDFN) can only be used for the job in which the command is used.
Status message can be sent only to program message queue.
If MSGID(*RANGE) is specified, RANGE required.
Either MSG or MSGID must be specified.
All messages have not been logged to the history log.
*INQ or *NOTIFY is needed for MSGTYPE parameter.
If *NONE specified for TYPE or LEN, *NONE required for both.
TOUSR parameter not allowed.
Inquiry or notify messages cannot be sent to *ALLACT.
Both user name and message queue were specified.
User name and message queue both are specified or missing.
Controller &1 already exists.
Device name &1 already exists.
Address duplicate of device &1.
Cannot attach this device to controller QCTL.
Controller QCTL can only be created by the system.
Multiple resource names not allowed for this line.
Duplicate resource names specified.
Address duplicate of controller &1.
Device &25 configuration not valid. Reason code &1.
Connection type must be multipoint for 3270 emulation.
Connection type must not be multipoint for RJE.
Switched not valid for type of physical interface.
Switched controllers not valid on nonswitched line.
Station address valid for multipoint line only.
Program name &1 not found in system library.
Parameter not valid.
Some device parameter values cannot be changed.
Device &25 vary request stopped.
Controller &24 vary configuration failed.
Device &25 vary failed. No recovery attempted.
Maximum length of request unit not valid.
Allow blinking cursor not valid for device type.
Controller &24 not varied on. Reason code &1.
Invalid station address for 3270 emulation line.
Line description not correct type for change command.
Direct connection not valid for this controller.
Only one mode name allowed for single session device.
Switch setting allowed only for local non-ASCII devices.
Location address allowed only for remote and SNA pass-through devices.
Line &23 Vary Configuration failed with reason code &1.
Controller &1 not compatible with its attachments.
Line &1 in test mode.
Controller &1 in test mode.
Device &1 in test mode.
Location password not valid.
Resource name &1 or &2 not found.
Controller &24 Vary Configuration failed.
Device &25 automatic vary on failed.
Modem data rate select is valid only for RS-232/V.24.
Switched connection type not valid for nonswitched line.
Autoanswer not valid for nonswitched line.
Autodial not valid for nonswitched line.
Dial command not valid for nonswitched line.
Must have autodial capability to specify dial command.
PAD emulation allowed only for X.25 switched virtual circuit out.
Station address must be specified.
Controller description &1 previously deleted.
Reset failure because line &2 varied on.
Host command processor emulation parameter not allowed.
Line &23 vary on stopped.
RJE application not valid for multipoint controllers.
Not authorized to object &1.
Unable to obtain lock on device &1.
Device &1 currently on-line.
Switched network backup not valid for switched line.
Must have autocall unit to specify autocall resource name.
Inactivity timer not valid for nonswitched line.
ASCII character code not valid for RJE.
Include STX character in LRC valid only for ASCII.
Nonproductive receive timer not valid for secondary line.
Device &1 already varied off.
Controller &24 class of resource conflict.
Controller &24 resource type conflict.
Device &1 not varied off. Error occurred.
Line description &1 previously deleted.
Line &1 already varied on.
Line &1 already varied off.
Line &1 cannot be varied on or off.
Controller description &1 previously deleted.
Controller &1 currently on-line.
Transmit TTD or WACK retry not valid for RJE.
Receive TTD or WACK retry is not valid for RJE or emulation.
Only one controller can be specified.
Station address must be specified for multipoint line.
Autocall resource name must be specified.
Switched network backup valid only for RS-232/V.24.
Controller &1 already varied off.
Controller &1 can not be varied on or off.
Device &25 resource type conflict.
Device &25 model number conflict.
Need SNBU feature to activate or deactivate SNBU.
List of active lines not available.
Line &23 reset failed.
Controller &24 reset failed.
Device &25 reset failed.
Line &23 was not varied on.
Drop line at sign-off allowed only for remote devices.
Autocall unit valid only for RS-232/V.24.
Must specify manual dial for switched X.21 bis/V.24.
Role of negotiable not valid for multipoint line.
Maximum number of controllers too large.
Station address not valid for primary line.
Maximum line speed for X.21 bis/V.24 is 19200 bps.
Switched line list not allowed.
Attached nonswitched line not allowed.
Adapter address, DSAP, and SSAP duplicate of &1.
Requested changes not allowed for controller QCTL.
Resource name &1 not found.
Device must be single session when local address not 00.
Configuration object &1 not correct type for request.
XOFF character must be specified if flow control is on.
Station address not valid for this line.
Connect poll retry not valid for this line.
Connect poll retry not valid for secondary line.
Nonswitched controller name not allowed.
Specify whether to include STX character in LRC.
Object &1 previously deleted.
Activate SNBU not allowed. SNBU feature not installed.
Device &25 vary on failed. Reset required.
Device &1 vary on failed.
Controller &1 not varied off. Controller active.
Line &1 not varied off. Line is active.
Message &1 not monitored. Affected object name is &2.
Device &25 vary on failed.
Maximum outstanding frames specification not valid.
Attached controllers exceeds maximum allowed.
Device QCONSOLE can only be created by the system.
Dial command must be specified if autodial capable.
Mode not defined for device &25.
Device &25 vary configuration request stopped.
Autoanswer must be *YES for this line.
Autodial must be *YES for this line.
V.25 bis valid only for RS-232/V.24 interface.
APPNLCLE parameter allowed only for type *APPNLCL.
Half duplex not valid for this line.
Inactivity timer not valid for primary line.
Line &23 vary configuration failed. Reset required.
Controller &24 vary failed. Reset required.
Device &25 vary on failed. Reset required.
Device &25 vary processing stopped.
Switched controllers cannot have SNBU.
Temporary system conflict.
SHM node type valid only for short hold mode.
Printer font must be specified.
Physical attachment value not valid.
Form feed value not allowed for device type.
Poll response delay not valid for primary line.
Idle timer not valid for secondary line.
Connect poll timer not valid for secondary line.
Poll cycle pause not valid for secondary line.
Frame retry not valid for secondary line.
Controller specified can not be connected to this device.
Remote location name &1 is not unique.
Port number allowed only for local devices or LAN printers.
Keyboard type required.
Station address not allowed for specified link type.
Poll limit allowed only for SDLC secondary without short hold mode.
Poll priority allowed only for SDLC without short hold mode.
Poll limit allowed only for SDLC without short hold mode.
Connect poll retry allowed only for SDLC without short hold mode.
NDM poll timer allowed only for SDLC without short hold mode.
LAN remote adapter address not allowed.
LAN DSAP not allowed.
LAN SSAP not allowed.
X.25 network level allowed only for X.25 link type.
X.25 link protocol allowed only for X.25 link type.
X.25 default packet size allowed only for X.25 link type.
X.25 default window size allowed only for X.25 link type.
Mode description previously deleted.
Device &1 must be varied off for this change.
Device description &1 not correct type for operation.
DBCS feature not allowed for device &1.
Connect poll retry not allowed.
X.25 frame retry allowed only for X.25 link type.
X.25 connection retry allowed only for X.25 link type.
X.25 response timer allowed only for X.25 link type.
X.25 connection timer allowed only for X.25 link type.
Location address specified not valid.
Printer file &1 in library &2 not found.
Separator character not valid for blocking type.
Transmit in transparent mode not valid for blocking type.
Transmit in transparent mode not valid.
Truncate trailing blanks not valid with blocking type.
Record length can not be larger than block length.
Emulation parameters not valid for application type.
Contention resolution winner must be *SEC for emulation.
For RJE application type, connection type must be *PP.
For emulation the connection type must be *MPTRIB.
Local address is not valid for RJE application type.
Local address must be 00.
Local address not valid for connection type of *MPTRIB.
Keyboard type not valid.
Duplicate source service access points not allowed.
Line resource name &1 not found.
Controller resource name &1 not found.
Device resource name &1 not found.
Echo valid only for full duplex line.
Autocall unit not valid for nonswitched line.
Flow control must be on to specify XON character.
Flow control must be on to specify XOFF character.
XOFF character must be different than XON character.
Maximum line speed for RS-232/V.24 is 19200 bps.
NDM poll timer not allowed.
Trailing characters not valid when EOR character is 00.
Local identifier specified not allowed.
Remote identifier specified not allowed.
X.25 connection retry not allowed for primary role.
Data link role must be negotiable.
Mode description &1 already exists.
X.25 connection timer not allowed for primary role.
X.25 delayed connection timer not allowed for primary role.
Data base record for resource &1 damaged.
Short hold mode allowed only for X.21.
Logical channel identifier specified not allowed.
Receive default window size must be 1-7 for modulus 8.
Receive maximum packet size not valid.
Locally controlled session not allowed.
Pre-established session not allowed.
Maximum frame size not valid for specified link type.
XON character must be specified if flow control is on.
Remote location name *ANY not unique.
Cannot specify PVC controller for a SVC logical channel.
Duplicate PVC controllers specified.
Logical channel identifiers must be in hexadecimal form.
Only digits 0-9 allowed for local network address.
Duplicate logical channel identifiers specified.
Controller description &1 not correct type for change.
&1 not correct type of resource.
Resource &1 already has controller &2 as automatic configuration controller.
Database record for &1 not available for update.
CP session support allowed only for APPN.
Node type allowed for APPN only.
Transmission group number allowed only for APPN.
Printer font cannot be specified.
Device &2 not compatible with controller &1.
Emulation application type valid only for multipoint controllers.
IOP reset ignored for line &1.
IOP reset not valid when varying on controller &1.
IOP reset not valid when varying on device &1.
Reserved mode name not allowed for user mode name.
Controller &1 not compatible with line &2.
Flow control valid only for full duplex line.
BSC control characters not valid for station address.
Class-of-service description name not correct.
*PROMPT not allowed in batch mode.
Local location name &2 not unique.
Remote location name or identifier &2 not correct.
Device &1 not in correct condition for this change.
Line &23 vary failed. No recovery attempted.
Controller &24 vary failed. No recovery attempted.
Device &1 must be varied off for this change.
DBCS font table &1 not found.
Line &23 in test mode.
Controller &24 in test mode.
Device &25 in test mode.
Line row &2 weight cannot be greater than line row &3.
Line row &2 link speed is not correct.
Line row &2 cost per connect time not correct.
Line row &2 cost per byte not correct.
Line row &2 security level not correct.
Line row &2 propagation delay not correct.
Auxiliary device not valid.
Local location name and local identifier not correct.
Device &1 not varied on.
Connection number of *ANY valid only for X.25 SVC in.
APPN required for TDLC or HPRIP link type.
Disconnect timer not valid for this controller.
Local name and identifier required for remote verification.
Local location name &2 not found.
Remote location entry &2 not found.
Line row &2 user-defined 1 not correct.
Line row &2 user-defined 2 not correct.
Line row &2 user-defined 3 not correct.
Node row &2 weight cannot be greater than node row &3.
Node row &2 route addition not correct.
Node row &2 congestion level not correct.
Specified location password not valid.
Line &23 vary on failed.
Network address &2 not found.
Remote location name &2 not found.
*PROMPT for logical channel entries not correct in batch.
Reset valid only when status is *ON.
Printer not allowed for device type.
Control point name &2 not valid.
Line &23 class of resource conflict.
Remote location entry &2 &3 &4 not valid.
Control point name must be specified for location name &2.
Location password &2 not correct.
Cursor position not correct for insert.
Space not available for insert.
Network address &2 not correct.
Device &25 vary processing stopped.
Controller &1 not compatible with attachments.
Device &1 not compatible with controller.
Line &1 vary processing stopped.
Printer font identifier &2 not valid.
Station address required for TDLC link type.
Device &25 class of resource conflict.
Remote location identifier required for location &2.
No configuration list name specified.
No entry for configuration list specified.
Remote network identifier &2 not correct.
Local location name &2 not correct.
Control point network identifier &2 not correct.
Auxiliary device address &4 used more than once.
Vary request not allowed for line &1.
Vary request not allowed for controller &1.
Either integer mask or fraction mask must be specified.
Combination of device type and device model not valid.
Local identifier required for switched or SNBU controllers.
Parameter allowed only for switched or SNBU controllers.
RJE host type and logon allowed only for RJE application type.
RJE host type and logon required for RJE application type.
Remote control point name not allowed.
Additional entries not available from this display.
Remote location name &2 not unique.
Logical channel identifier &1 entry cannot be removed.
Must have autocall unit to specify no dial command.
Remote BSCEL not valid with blocking type.
APPNRMTE parameter allowed only for type *APPNRMT.
Exchange identifier not valid for controller type.
Model not valid for controller type.
Switched network backup not allowed for specified link type.
Specified X.25 user group identifier not valid.
Exchange identifier required for this controller.
LAN remote adapter address required for link type.
Station address required for SDLC link type.
Connection number not allowed for link type.
Maximum outstanding frames must be less than modulus.
ASYNCADRE and CFGL parameters allowed only for type *ASYNCADR.
ASYNCLOCE parameter allowed only for type *ASYNCLOC.
Switched controller names must be unique.
Controller &2 vary on or vary off stopped.
Controller &1 vary processing stopped.
Line &1 vary configuration stopped.
User facilities not valid for specified link type.
Local identifier allowed only for switched or SNBU controllers.
SSCP identifier required for this controller.
X.25 network level required for X.25 link type.
X.25 acknowledgement timer not allowed.
X.25 inactivity timer not allowed.
Logical channel identifier required.
X.25 logical channel ID not allowed.
Switched connection not allowed for specified link type.
X.25 user group ID not allowed.
Controller &2 vary configuration stopped.
Line &1 vary processing stopped.
Controller &1 vary processing stopped.
Device &1 vary processing stopped.
DBCS feature not valid for device type and model.
Device type and model not valid for device class.
Reverse charging not allowed.
X.25 connection password not allowed.
User facilities allowed only for switched controllers.
SSCP identifier not valid for controller type.
&1 type &2 partially changed and may not be usable.
Switched disconnect not allowed.
Switched connection not allowed.
Too many devices attached for controller type.
SNBU not allowed for multipoint connection.
Line &23 vary on failed.
Controller &24 vary on failed.
Device &25 vary on failed.
Predial delay allowed only for switched or SNBU controllers.
Double byte character set (DBCS) feature required.
Double byte character set feature not valid.
Connection number is not allowed.
Remote identifiers are not allowed.
Specified user facilities value not valid.
Remote CP name required with remote network ID.
Data link role must be secondary for TDLC link type.
X.25 delayed connection timer not allowed.
Poll priority not valid.
Redial delay allowed only for switched or SNBU controllers.
Dial retry not allowed.
Predial delay not allowed for link type.
Redial delay not allowed for link type.
Dial retry not allowed for link type.
Value specified for line type or class not valid.
Value specified for controller type or class not valid.
Value specified for device type or class not valid.
No line descriptions selected
No controller descriptions selected
No device descriptions selected
No mode descriptions selected
No class-of-service descriptions selected
No configuration lists selected
No configuration objects selected
Remote location name not valid.
Configuration description not valid.
Configuration description not valid.
Configuration description not valid.
Remote location name not valid.
Remote location name not valid.
Remote network identifier required for APPN.
Remote network identifier and CP name same as local system.
Blocking type parameter not allowed.
Separator character parameter not allowed.
Must be BSCEL to specify remote BSCEL.
Maximum record length parameter not allowed.
Maximum block length parameter not allowed.
Transmit in transparent mode parameter not allowed.
Data compression and decompression parameter not allowed.
Truncate trailing blanks parameter not allowed.
Group separator parameter not allowed.
Remote location name not valid.
Remote location name not valid.
Connect timer valid only for X.21 circuit switched line.
Short timer not valid for this line.
Long timer not valid for this line.
Short retry not valid for this line.
Long retry not valid for this line.
Truncate trailing blanks not valid with data compression.
Inactivity timer must be *NOMAX for delayed connection.
Inactivity timer parameter not allowed for RJE.
Continue timer not allowed for RJE.
Data link role not valid for node type.
Device address required for device class.
*SYSVAL not valid for language type.
Configuration list name not allowed for list type specified.
Auto-configuration value not valid for this controller.
Line &23 vary on failed.
Controller &24 vary on failed.
Device &25 vary on failed.
Line &23 vary on failed.
Controller &24 vary on failed.
Device &25 vary on failed.
Port number not valid
Physical attachment must be specified.
Physical attachment cannot be specified.
Keyboard language type value not valid.
Inactivity timer cannot be specified.
Line speed cannot be specified.
Word length cannot be specified.
Type of parity cannot be specified.
Stop bits cannot be specified.
Inactivity timer value not valid.
Line speed value not valid.
Word length value not valid.
Stop bits value not valid.
Type of parity value not valid.
Short hold mode call format not valid for this line.
Emulated twinaxial device must be specified.
Emulated twinaxial device cannot be specified.
Emulated twinaxial device value not valid.
Auxiliary printer must be specified.
Auxiliary printer cannot be specified.
Physical attachment value not valid.
Language type cannot be specified.
Print quality cannot be specified.
Number of drawers cannot be specified.
Number of drawers must be specified.
Number of drawers value not valid.
Physical attachment value not valid.
Controller &1 cannot be varied off at this time.
Vary Configuration error occurred during IPL.
Device &1 must be varied off for this change.
Changes not compatible with attached controller.
Maximum frame size not allowed for controller.
Vary on wait cannot be specified.
Vary on wait not allowed.
Remote location name and local location name cannot be the same.
Controller &1 vary on failed. Address duplication.
Device &25 vary processing stopped.
Device &25 vary processing stopped.
Calling number not valid for nonswitched line.
Emulating ASCII device cannot be specified.
Clocking not valid for this physical interface.
Line speed value not valid for this interface.
Default program required if program start request capable.
Modulus must be 8 for multipoint or short hold mode line.
Only dial out is allowed for delayed connection.
CPYF with PRINT parameter not allowed.
FMTOPT(*CVTFLOAT) or FMTOPT(*NULLFLAGS) not valid.
From-file record length less than expected length.
CPYF parameter value not allowed with FMTOPT value.
Unicode fields not allowed on FROMKEY or TOKEY with *BLDKEY.
Unicode field not allowed on INCCHAR parameter.
Unicode fields not allowed on INCREL parameter.
FLDDFNFILE parameter not allowed with DTAFMT(*DLM).
FLDDFNFILE parameter must be specified with DTAFMT(*FIXED).
Parameter FROMSTMF or FROMFILE required.
Parameter TOSTMF or TOFILE required.
File &1 in library &2 could not be created.
Field type not allowed on FROMKEY or TOKEY with *BLDKEY.
INCREL not valid for field &4.
Remove blanks only valid when string delimiter is *NONE (STRDLM(*NONE)).
TOCCSID not valid when output file is a stream file.
STMFCODPAG not valid when output file is a database file.
Error found in the from-file data at record number &3.
COMPRESS(*NO) not allowed with parameter values specified.
FROMRCD or TORCD value too large for COMPRESS(*NO).
SRCSEQ parameter requires SRCOPT parameter.
MBROPT(*UPDADD) is not allowed.
TEXT parameter requires MBROPT(*REPLACE) parameter.
SRCTYPE parameter requires MBROPT(*REPLACE) parameter.
FROMRCD value larger than TORCD value.
FROMRCD not allowed with FROMKEY or TOKEY.
TORCD not allowed with FROMKEY or TOKEY.
NBRRCDS not allowed with TORCD or TOKEY.
TOMBR name not allowed with TOFILE(*PRINT).
Resource name must be specified.
Resource name cannot be specified.
Switch setting must be specified.
Switch setting cannot be specified.
Attached controller is not allowed.
Switch setting value specified is not valid.
Must be nonswitched point-to-point for this interface.
Advanced Function Printing not allowed.
AFP attachment cannot be specified.
AFP attachment specified is not valid for device class.
Local location address not allowed.
Local location address must be specified.
Attached controller not allowed.
Maximum length of request unit not allowed.
FNCPASTHRE parameter allowed only for type *FNCPASTHR.
Maximum pending requests not allowed.
Print request timer not allowed.
Form definition not allowed.
Character identifier not allowed.
Remote location name not allowed.
Remote location name must be specified.
Line &23 vary on stopped.
Device &25 vary on stopped.
Controller &24 vary on stopped.
Controller &24 vary on stopped.
Maximum length request unit value not valid.
Short hold mode access code not valid for this line.
Call progress signal retry not valid for this line.
Retail device name &2 not unique on configuration list.
Short hold mode valid only for switched SDLC controllers.
SHM disconnect limit valid only for short hold mode.
SHM disconnect timer valid only for short hold mode.
Remote control point name required for short hold mode.

Length: 277524 Date: 20200925 Time: 214519

Count: 1433     sap01-206 ( 1596 ms ) This documentation is copyright by IBM.