We are hiring and constantly growing! Have a look through our vacancies to find the right role for you!

CPA5737 - Controller &24 on line &23 not contacted. Probable configuration problem. (C R) ( OS/400 )

CPA5737 - Controller &24 on line &23 not contacted. Probable configuration problem. (C R) ( OS/400 )

SUBST_MERGE_LIST - merge external lists to one complete list with #if... logic for R3up   Fill RESBD Structure from EBP Component Structure  
This documentation is copyright by IBM.
SAP E-Book


Message : CPA5737
Controller &24 on line &23 not contacted. Probable configuration problem. (C R)

Message Long Text :

Cause . . . . . : The probable causes are:
-- A local communications configuration problem.
-- A remote communications configuration problem.
-- A remote system failure.
Recovery . . . : Do one or more of the following:
-- Use the Work With Controller Description (WRKCTLD) and the Work With Line Description (WRKLIND) commands to verify that the exchange identifier is configured correctly on the local system. If &24 is a HOST controller, the exchange identifier is configured in the controller description (LCLEXCHID parameter). Otherwise the exchange identifier is configured in line description &23 (EXCHID parameter).
-- Verify that the local control point name (LCLCPNAME parameter) of the network attributes is correct using the Display Network Attributes (DSPNETA) command.
-- Contact the remote system operator to verify that the exchange identifier (XID) and control point name are configured on the remote system correctly.
-- Contact the remote operator to determine if there is any problem at the remote system that could cause this failure.
Then reply to the message.
If the problem continues, report the problem (ANZPRB command).
Possible choices for replying to message . . . . . . . . . . . . . . . :
C -- Cancel recovery and inform any applications that are waiting for an operation that the recovery has been canceled.
R -- Try the operation one more time.
Technical description . . . . . . . . : The error log identifier is &22. The XID is &41.
The error code is &40: Control Vector X'22' was found in the XID that was received from the remote system.
For more information on XIDs, see Systems Network Architecture Formats, GA27-3136.

Message File : QCPFMSG
Library Message File : QSYS2924


CPI1466 during Backup   SUBST_MERGE_LIST - merge external lists to one complete list with #if... logic for R3up  
This documentation is copyright by IBM.

Length: 3291 Date: 20201025 Time: 091414     sap01-206 ( 2 ms )