Ansicht
Dokumentation

CPA57C9 - Station address from controller &24 not configured. (C G R) ( OS/400 )

General Data in Customer Master   BAL_S_LOG - Application Log: Log header data  
This documentation is copyright by IBM.


Message : CPA57C9
Station address from controller &24 not configured. (C G R)

Message Long Text :

Cause . . . . . : The probable causes are:
-- The local system is not configured correctly.
-- The remote system is not configured correctly.
Recovery . . . : Do one or more of the following:
-- Use the Work with Controller Description (WRKCTLD) command to verify the station address (STNADR parameter).
-- Ask the remote system operator to verify the configuration of the remote system.
If the problem continues, press F14 to run problem analysis.
Possible choices for replying to message . . . . . . . . . . . . . . . :
C -- Cancel recovery and inform any applications that are waiting for an operation that the recovery has been canceled.
G -- Start the automatic communications recovery again as defined by the communications recovery limit (CMNRCYLMT) of the controller description.
R -- Try again one more time.
Technical description . . . . . . . . : The error code is &40: The station address received from the remote system does not match the station identified by the node identifier in the XID received from the remote system. This error is applicable for T2.0 primary only.
For more information on XIDs, see Systems Network Architecture Formats, GA27-3136.

Message File : QCPFMSG
Library Message File : QSYS2924


BAL Application Log Documentation   PERFORM Short Reference  
This documentation is copyright by IBM.

Length: 3263 Date: 20240420 Time: 010147     sap01-206 ( 3 ms )