Message : CPA9486
The address switch failed on tape device &25.
Message Long Text :
Cause . . . . . : The address switch failed on device &25. It may be possible to recover from this failure. The Error Log ID associated with this condition is &22. Recovery . . . : Do the following: 1. Power off the 9347. 2. Move each address switch position up and down two or more times. 3. Set the correct address in the switch (make sure the switches are all the way in the up or down position). 4. Power on the 9347. Try the operation again. If this error continues to occur, enter the command ANZPRB on the operator console and follow the instructions on the subsequent panels.