Ansicht
Dokumentation
00224 - Problem using call 'SYSTEM' function to copy I FS files
RFUMSV00 - Advance Return for Tax on Sales/Purchases rdisp/max_wprun_time - Maximum work process run timeThis documentation is copyright by SAP AG.
Problem using call 'SYSTEM' function to copy I FS files
Hi Volker,Does the job AS4RDIREXE run with all same authority of the instance
user profile that is associated with the job. In our case the user
is PRD02. We already have some ABAP programs that use the
call 'system' function that work correctly. As I stated previously,
if I signon directly to the AS400 system as PRD02 then I can issue
the call to QCMDEXC with the same parameters and it works fine. It
is only when the call comes from the AS4RDIREXE job that it fails. I
have already entered this issue into OSS but I have not received any
response. They stated it was being turned over to programming and
then they lowered the priority which I do not know why.
Thanks,
Russ
--- In SAP on System iZegroups.com, "Volker Gueldenpfennig"
<volker.gueldenpfennigZs...> wrote:
> Hi Russ,
>
> I changed the ABAP of Klaus with a default for the WRKSYSSTS as
> follows:
>
> * Testprogram that can execute AS/400 commands.
> * Author: 981028 - Klaus Lindegaard RW-DK
> *
> * For result check as400 joblog under job(AS4DIREXE) user(SAPxx)
> *
> REPORT ZCALL_SYSTEM2.
> PARAMETERS:
> AS4CMD(200) DEFAULT 'WRKSYSSTS'.
> *
> DATA: BEGIN OF MSG OCCURS 0,
> FIELD-200,
> AS4CMD-200,
> END OF MSG.
> *
> CALL 'SYSTEM' ID 'COMMAND' FIELD AS4CMD
> ID 'TAB' FIELD MSG-*SYS*.
>
> Then I ran it in a 4.5B system as well. After this I found the
> spoolfile QPDSPSTS as expected. So this seems to work on my system
> with kernel-patch 572
>
> Regards
>
> Volker Gueldenpfennig
>
> --- In SAP on System iZegroups.com, russ.cookZg... wrote:
> > Hi Volker,
> >
> > I do not see the same error as Klaus in my job log. All I see is
a
> > message that QCMDEXC failed but no reason. We are on release 45B
> > with a kernel patch level of 573. We are on OS400 release V4R5
> with
> > all the required PTFs and cum packs.
> >
> > Kind regards,
> >
> > Russ Cook
> >
> >
> >
> > --- In SAP on System iZegroups.com, "Gueldenpfennig, Volker"
> > <volker.gueldenpfennigZs...> wrote:
> > > Hi Klaus,
> > >
> > > we checked the coding with 4.6D kernel 338. There it worked
fine
> as
> > well. In
> > > this area were made a lot changes in the past. So I would
please
> > ask you to
> > > install 338 and the latest SAPXPG patch. When it shouldn't work
> by
> > then,
> > > please let us know.
> > >
> > > Regards
> > >
> > > Volker Gueldenpfennig
> > >
> > > > -----Original Message-----
> > > > From: Klaus Lindegaard (RWDK) [mailto:klaus.lindegaardZr...]
> > > > Sent: Mittwoch, 3. Januar 2001 08:31
> > > > To: 'SAP on System iZegroups.com'; Gueldenpfennig, Volker;
> > > > 'russ.cookZg...'
> > > > Subject: SV: Problem using call 'SYSTEM'
> > > > function to copy
> > > > I FS files
> > > >
> > > >
> > > > Hi Russ and Volker.
> > > >
> > > > I found an old program that I made under 3.1H and there it
> > > > used to work (at
> > > > least in '98) I have entered a copy of the program for you,
> > > >
> > > > "Funny" thing is - it does not work any more.
> > > >
> > > > It is possible to enter any OS400 command at the prompt from
> the
> > abap
> > > > program.
> > > >
> > > > * Testprogram that can execute AS/400 commands.
> > > > * Author: 981028 - Klaus Lindegaard RW-DK
> > > > *
> > > > * For result check as400 joblog under job(AS4DIREXE) user
> (SAPxx)
> > > > *
> > > > REPORT ZKLI0001.
> > > > PARAMETERS:
> > > > AS4CMD(200) DEFAULT ' '.
> > > > *
> > > > DATA: BEGIN OF MSG OCCURS 0,
> > > > FIELD-200,
> > > > AS4CMD-200,
> > > > END OF MSG.
> > > > *
> > > > CALL 'SYSTEM' ID 'COMMAND' FIELD AS4CMD
> > > > ID 'TAB' FIELD MSG-*SYS*.
> > > >
> > > > In the joblog I see that the execution gets cancelled, (sorry
> > > > for IBM's
> > > > Danish translation of OS400)
> > > >
> > > > 40 01-01-03 08:06:59 QLICKOBJ QSYS 0150
> > > > AS4CMDEXC
> > > >
> > > > Til modul . . . . . . . . . : AS4CMDEXC
> > > >
> > > > Til procedure . . . . . . . : main
> > > >
> > > > Udtryk . . . . . . . . . . : 4
> > > >
> > > > Meddelelse . . : Objekt XPG000325 i bibliotek R3400 er
> > > > ikke fundet.
> > > >
> > > > Årsag . . . . . : Objektet XPG000325 i biblioteket R3400
> > > > af typen *FILE
> > > >
> > > > findes ikke. Enten er navnet på objektet eller
biblioteket
> > ikke
> > > > rigtigt,
> > > >
> > > > In short it says object not found termination see is 40 msg
> > > > is CPF9801
> > > >
> > > > So Russ, might just have found a new error.
> > > >
> > > > Regards
> > > > Klaus Lindegaard
> > > >
> > > > PS.: Don't mind the user name this has changed since then. on
> > > > 4.6B it is
> > > > <sid><instance> ex. DEV01
> > > >
> > > > > -----Oprindelig meddelelse-----
> > > > > Fra: russ.cookZg...
> > > > [SMTP:russ.cookZg...]
> > > > > Sendt: 2. januar 2001 23:00
> > > > > Til: SAP on System iZegroups.com
> > > > > Emne: Problem using call 'SYSTEM'
> > > > function to copy IFS
> > > > > files
> > > > >
> > > > > Hi Group:
> > > > >
> > > > > I am trying to execute an AS400 command from an ABAP
program
> > using
> > > > > the call 'System' function. The command I am trying to
> execute
> > is a
> > > > > as400 cpy command to copy a file from one IFS directory to
> > another
> > > > > IFS directory. The IFS directories and the object in the
IFS
> > > > > directory have a primary group authorization
named 'IXOS1'.
> I
> > have
> > > > > modified the instance user id PRD02 to be a member of the
> IXOS1
> > > > > group. When I execute this abap program I see that an
> > > > AS4RDIREXE job
> > > > > is created on the AS400 and run. When I review the AS400
> spool
> > file
> > > > > for this job I see that the call to QCMDEXC command failed
> but
> > it
> > > > > does not list any reason. The command that is executed is:
> > > > >
> > > > > CALL QCMDEXC parm('cpy obj
> > (''/gdsap/IXOT/PRD/upload/D0A243388.rwc'')
> > > > > toobj(''/gdsap/IXOT/PRD/rwctest.txt'')' 84)
> > > > >
> > > > > It appears that this job is submitted under the instance
user
> > id
> > > > > PRD02. If I sign on to the AS400 as PRD02 and execute this
> > exact
> > > > > command from the command line then it works. I have spent
a
> > great
> > > > > deal of time trying to get this to work but I have not had
> > > > any luck.
> > > > > This program is needed for our IXOS document management
> system.
> > > > >
> > > > > Kind regards,
> > > > >
> > > > > Russ Cook
> > > > >
> > > > >
> > > > >
> > > > > eGroups Sponsor
> > > > > Click Here!
> > > > >
> > > > <http://rd.consolut.net/M=163100.1220844.2856387.2/D=egroupmail/S
> > > > =1700007389:
> > > > > N/A=524804/*http://www.classmates.com/index.tf?s=2629>
> > > > >
> > > > > To unsubscribe from this group, send an email to:
> > > > > SAP on System i-unsubscribeZegroups.com
> > > > >
> > > > >
> > > > >
> > > >
Durban Tours - Südafrika Safari
General Data in Customer Master rdisp/max_wprun_time - Maximum work process run time
This documentation is copyright by SAP AG.
Length: 10789 Date: 20240426 Time: 211344 sap01-206 ( 3 ms )
