Ansicht
Dokumentation
05714 - V5R1 Problem - can't establish Opti Connect connection
CL_GUI_FRONTEND_SERVICES - Frontend Services Addresses (Business Address Services)This documentation is copyright by SAP AG.
V5R1 Problem - can't establish Opti Connect connection
Rich,'Just a thought', yeah, but a great thought!! We installed the full
Opticonnect (5722SS1, Opt. 23) and voila - we were able to start SOCMGR and
then we could establish all optical connections. We just tested one
connection with an application instance and it worked well, so tonight we
will restart all remaining R/3-sessions back to Opticonnect (as a work
around we have switched them to a pretty slow tcp connection last night). I
wonder, why the support team couldn't give us this important clue?!
More confusion caused by IBM's software support:
They told us this morning that Optimover is not running any longer under
v5r1 and it "was forgotten to publish this fact" in the installation
preparation information. 2 hrs later they called again and said that they
gave us a wrong information and that Optimover of course is still running
under v5r1....... - now we are waiting for a definite commitment on this
issue.
Anyway, thanks again a lot!!
Regards,
Franz
Franz Lehnardt
AS/400 & R/3 Basis Administration
EGG IT Services GmbH
Eschborn, Germany
Tel. ++49 (0) 6196 477-360
Fax ++49 (0) 6196 477-776
-----Ursprüngliche Nachricht-----
Von: Yoshimoto, Rich (Chicago) [mailto:yoshimotorZb...]
Gesendet am: Montag, 15. April 2002 00:04
An: 'DoNotReply@consolut.eu'
Betreff: RE: V5R1 Problem - can't establish
Opti Connect connection
Franz,
Are you using the full opticonnect version (5769ss1 option 23) or
the
trimmed down optimover software (5799fwq)? Many companies, like
ours, opted
for the cheaper optimover software than the much more expensive full
blown
opticonnect.
I heard that optimover is no longer supported V5R1, that you would
have to
upgrade to option 23 or if you are on an 8xx series machine, move to
a
gigabyte ethernet card. What "supported" actually means I'm not
sure. That
is whether it just won't work under V5R1 or whether it will work but
won't
be "supported" by IBM if problem occurs.
Just a thought,
Rich
-----Original Message-----
From: Lehnardt, Franz [mailto:franz.lehnardtZe...]
Sent: Sunday, April 14, 2002 4:10 PM
To: DoNotReply@consolut.eu
Subject: AW: V5R1 Problem - can't establish Opti
Connect
connection
Hi Bernd,
yes, we tried deleting and recreating the CTL + DEV describtions -
doesn't
help.
Meanwhile the problem appears to be caused because on all four
machines the
SOCMGR doesn't start when sbs QSOC is started. No idea why.
PTFs are all checked so far. Not sure if RCLSTG would help or would
make it
better. Even the cracks at IBM hotlines are not sure if we have a HW
or a SW
problem. Thanks again.
Regards,
Franz
-----Ursprüngliche Nachricht-----
Von: Bernd Schaefers [mailto:bschaefersZg...]
Gesendet am: Sonntag, 14. April 2002 21:38
An: DoNotReply@consolut.eu
Betreff: Re: V5R1 Problem - can't
establish
Opti Connect connection
Hi,
If you're currently just waiting and hoping for IBM Support
and
don't find
any APARs/Fixes you might try a RCLSTG in the meantime. The
defective
desciptions will hopefully be sent into bardo. I don't have
any
experience
with OptiConnect, but you probably did try deleting and
recreating
the
description?
Best
Bernd
----- Original Message -----
From: "Lehnardt, Franz" <franz.lehnardtZe...>
To: "'SAP on System i (E-Mail)'" <DoNotReply@consolut.eu>
Sent: Sunday, April 14, 2002 7:48 PM
Subject: V5R1 Problem - can't establish Opti
Connect
connection
> Hi Gang,
>
> big problem, installed V5R1 yesterday on PRD Servers.
Since then,
we can't
> start Opti Connect. Every try to vary the OC controllers
on ends
up in msg
> CPI5941 and the describtion is demaged.
> IBM has no idea, wheter this is a HW or a SW problem.
>
> PRD is not able to bring R/3 up. Any ideas????
>
> Thanks,
>
> Franz
>
> Franz Lehnardt
> AS/400 & R/3 Basis Administration
> EGG IT Services GmbH
> Eschborn, Germany
> Tel. ++49 (0) 6196 477-360
> Fax ++49 (0) 6196 477-776
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Have a look to our homepage at:
http://www.consolut.net
>
DoNotReply@consolut.eu
>
> Your use of consolut is subject to
http://www.consolut.net
>
>
------------------------ consolut Sponsor
Have a look to our homepage at: http://www.consolut.net
DoNotReply@consolut.eu
Your use of consolut is subject to
http://www.consolut.net
Have a look to our homepage at: http://www.consolut.net
DoNotReply@consolut.eu
Your use of consolut is subject to
http://www.consolut.net
------------------------ consolut Sponsor
Have a look to our homepage at: http://www.consolut.net
DoNotReply@consolut.eu
Your use of consolut is subject to
http://www.consolut.net
Durban Tours - Südafrika Safari
CPI1466 during Backup BAL_S_LOG - Application Log: Log header data
This documentation is copyright by SAP AG.
Length: 7679 Date: 20240510 Time: 153627 sap01-206 ( 3 ms )
