Ansicht
Dokumentation
12222 - "Function not supported by file system" during R3SETUP
CL_GUI_FRONTEND_SERVICES - Frontend Services TXBHW - Original Tax Base Amount in Local CurrencyThis documentation is copyright by SAP AG.
"Function not supported by file system" during R3SETUP
Volker
Thanks - You solved that problem but I got one more in step Create SAP
license table.
[Thr 00000000:00000006] db_con_connect (con_name=R/3)
ERROR 2003-12-08 00:54:47 DBR3LICENSECREATE_IND_DB4 SlicCall:0
See logfile dev_slic for further information.
ERROR 2003-12-08 00:54:47 DBR3LICENSECREATE_IND_DB4 InstallationDo:0
Phase failed.
The logfile dev_slic told me:
---------------------------------------------------
trc file: "dev_slic", trc level: 2, release: "46D"
---------------------------------------------------
¬Thr 00000000:00000006| Mon Dec 8 00:54:47 2003
¬Thr 00000000:00000006| SlicSapInstall: sysname: >QN2< connect: >1<
rollback: >1<
¬Thr 00000000:00000006| DB connection handle = 1.
¬Thr 00000000:00000006| *** ERROR => CPF0006 occured. Refer to job log.
¬dbsldb4dbi.c 1108|
¬Thr 00000000:00000006| *** ERROR => Error: CALL PGM(CHGR3SYSLE) PARM('
*ADD') failed. ¬dbsldb4u
¬Thr 00000000:00000006|
*****************************************************************************
*
¬Thr 00000000:00000006| * LOCATION CPIC (TCP/IP) on local host
¬Thr 00000000:00000006| * ERROR Connect to database failed
¬Thr 00000000:00000006| *
* TIME Mon Dec 8 00:54:47 2003
¬Thr 00000000:00000006| * RELEASE 46D
¬Thr 00000000:00000006| * COMPONENT SLIC
Program CHGR3SYSLE is not in the system at all.....
As note 392165 describe for the error above in R3SETUP I download and patch
program DBINCONDB4 with DBINCON. OK APYR3FIX completed.
Same error then I restart R3SETUP. I also take a chance on apply a newer
R3SETUP but same error.... What to do???
Regards
**************************************************
Per-Lennart Andersson
Coca-Cola Drycker Sverige AB
Tel +46 8 5007 5057 Mobil +46 70 320 5743
"Volker
Gueldenpfennig" To:
DoNotReply@consolut.eu
<volker.gueldenpfenni cc:
gZsap.com> Subject: Re:
"Function not supported by
file system" during R3SETUP
2003-12-06 21:09
Please respond to
SAP on System i
Hi Per-Lennart,
as described in note 392165 in point 9 (it is wrong, that it only
happens in 3-tier appl-servers!), you have to install the following
both patches:
CRTR3SYS and CRTR3INST
As you are using the old Kernel CD and now the new is patched on the
SMP, you can't find these patches there.
I could suggest the following options to you:
- install the complete 1444 CD just now and proceed then
- get the CRTR3SYS and CRTR3INST *PGM from the new CD (e.g. from a
differrent kernel on another LPAR) and hope that they work together
with this old kernel - it may be an UPDPGM on these EXEs necessary,
with the program, you get a "Signature Violation".
- as the root cause of your problem is that the trans directory is
on a different host, you could change this to local as well.
(if you find crtr3sys or crtr3inst in the r3setup directory, you
have to update them as well, because they are then most likely used!)
As everything seems to be very complicated right now, we should
think how to optimize this for other customers. I think, these
problems will be fixed with the new EXT kernel, that will be
available in a few days, as these kernels replace the installation
sets as well.
For you I would suggest to make the trans dir locally for temporary.
You can do this similar as follows:
- rmvlnk '/usr/sap/trans'
- addlnk '/usr/sap/trans' '/sapmnt/trans'
(I don't know the order in the last command - you should check the
F4)
- restart r3setup - it should work fine
- after r3setup is finished do it back again
- rmvlnk '/usr/sap/trans'
- addlnk '/usr/sap/trans' '/qfilesvr.400/as400name/sapmnt/trans'
Hope, this helps
Regards
Volker
--- In DoNotReply@consolut.eu, "Per-Lennart Andersson"
<peranderssonZc...> wrote:
> Hi all
>
> Trying to move one R3 system from one LPAR to another. Using
R3SETUP and
> command file DBR3CP.R3S. It stop in fase CRTR3SYS saying:
> ERROR 2003-12-06 14:51:28 CRTR3SYS_IND_DB4 InternalInstallationDo:0
> Message ID . . : SAP0897
> Message text . : Could not execute CRTR3SYS SID(QN2)
>
> More information in in joblog saying:
>
> Message . . . . : Function not supported by file system.
> Cause . . . . . : An attempt was made to use a function which
was not
> supported by the file system for
path /usr/sap/trans/bin/TPPARAM. The
> path
> selected may not be valid for the function, or it may not be in
the same
> file system.
> Function not supported by file system.
> Could not execute CHGPGP OBJ('/usr/sap/trans/bin/TPPARAM')
> NEWPGP(R3GROUP)
> DTAAUT(*RWX) OBJAUT(*ALL).
> Command CHGPGP failed. See previously listed messages in the
job log.
>
> I guess the problem is in TPPARAM and there I just delete the old
entry for
> QN2 but the problem is still there after restart...
>
> Anybody any idea?? I'm on V5R2 (the old system V5R1) next latest
DB and
> Java pack. R3 on 46C SR2. On the new system there are already on
46C and
> one CRM 3.1.
>
> Regards
> **************************************************
> Per-Lennart Andersson
> Coca-Cola Drycker Sverige AB
>
> Tel +46 8 5007 5057 Mobil +46 70 320 5743
consolut Sponsor
click here
[IMAGE]
Have a look to our homepage at: http://www.consolut.net
DoNotReply@consolut.eu
Durban Tours - Südafrika Safari
ABAP Short Reference CL_GUI_FRONTEND_SERVICES - Frontend Services
This documentation is copyright by SAP AG.
Length: 7125 Date: 20240426 Time: 184324 sap01-206 ( 4 ms )
