Ansicht
Dokumentation
12232 - "Function not supported by file system" during R3SETUP
Fill RESBD Structure from EBP Component Structure SUBST_MERGE_LIST - merge external lists to one complete list with #if... logic for R3upThis documentation is copyright by SAP AG.
"Function not supported by file system" during R3SETUP
Hi,you should have a look if the lib R3SYS is on your system. If not, I
would create it empty for a fast solution. It can be filled later on.
If ít is there, the next question would be:
Is this isn the user- or system-libl in your job already ?
Because this program does exactly this - but may fail if the LIB is
in the LIBL already.
BUT:
CPF0006 sounds like that it was not possible, that the program was
called correctly.
YES: That's your problem:
This PGM is a QSECOFR *OWNER Pgm and will be on *PUBLIC *EXCLUDE!
I would suggest to run FIXR3OWNS. If this still doesn't fix it, just
use *PUBLIC *ALL for this program and retry.
Regards
Volker
--- In DoNotReply@consolut.eu, "Per-Lennart Andersson"
<peranderssonZc...> wrote:
>
> Volker
>
> Wrong of me. CHGR3SYSLE is in the system in several libraries. The
problem
> is something else. Do you have any suggestion?
>
> Regards / PL
>
> **************************************************
> Per-Lennart Andersson
> Coca-Cola Drycker Sverige AB
>
> Tel +46 8 5007 5057 Mobil +46 70 320 5743
>
>
>
>
>
> "Volker
> Gueldenpfennig" To:
DoNotReply@consolut.eu
> <volker.gueldenpfenni
cc:
> gZsap.com> Subject:
Re: "Function not supported by
> file system"
during R3SETUP
> 2003-12-08
09:15
> Please respond
to
>
SAP on System i
>
>
>
>
>
>
> Hi Peer,
>
> CHGR3SYSLE needs to be in the kernel. I would suggest, to get is
from
> another box. Otherwise we could mail it to you.
>
> Regards
>
> Volker
>
> --- In DoNotReply@consolut.eu, "Per-Lennart Andersson"
> <peranderssonZc...> wrote:
> >
> > Volker
> >
> > Thanks - You solved that problem but I got one more in step Create
> SAP
> > license table.
> >
> > [Thr 00000000:00000006] db_con_connect (con_name=R/3)
> > ERROR 2003-12-08 00:54:47 DBR3LICENSECREATE_IND_DB4 SlicCall:0
> > See logfile dev_slic for further information.
> >
> > ERROR 2003-12-08 00:54:47 DBR3LICENSECREATE_IND_DB4
> InstallationDo:0
> > Phase failed.
> >
> > The logfile dev_slic told me:
> >
> > ---------------------------------------------------
> > trc file: "dev_slic", trc level: 2, release: "46D"
> > ---------------------------------------------------
> > ¬Thr 00000000:00000006| Mon Dec 8 00:54:47 2003
> > ¬Thr 00000000:00000006| SlicSapInstall: sysname: >QN2< connect:
>1<
> > rollback: >1<
> > ¬Thr 00000000:00000006| DB connection handle = 1.
> > ¬Thr 00000000:00000006| *** ERROR => CPF0006 occured. Refer to job
> log.
> > ¬dbsldb4dbi.c 1108|
> > ¬Thr 00000000:00000006| *** ERROR => Error: CALL PGM(CHGR3SYSLE)
> PARM('
> > *ADD') failed. ¬dbsldb4u
> > ¬Thr 00000000:00000006|
> >
>
**********************************************************************
> *******
> >
> >
> > *
> > ¬Thr 00000000:00000006| * LOCATION CPIC (TCP/IP) on local host
> > ¬Thr 00000000:00000006| * ERROR Connect to database failed
> > ¬Thr 00000000:00000006| *
> > * TIME Mon Dec 8 00:54:47 2003
> > ¬Thr 00000000:00000006| * RELEASE 46D
> > ¬Thr 00000000:00000006| * COMPONENT SLIC
> >
> > Program CHGR3SYSLE is not in the system at all.....
> >
> > As note 392165 describe for the error above in R3SETUP I download
> and patch
> > program DBINCONDB4 with DBINCON. OK APYR3FIX completed.
> > Same error then I restart R3SETUP. I also take a chance on apply
a
> newer
> > R3SETUP but same error.... What to do???
> >
> > Regards
> >
> > **************************************************
> > Per-Lennart Andersson
> > Coca-Cola Drycker Sverige AB
> >
> > Tel +46 8 5007 5057 Mobil +46 70 320 5743
> >
> >
> >
> >
> >
>
> > "Volker
>
> > Gueldenpfennig" To:
> DoNotReply@consolut.eu
> > <volker.gueldenpfenni
> cc:
> > gZsap.com> Subject:
> Re: "Function not supported by
> > file system"
> during R3SETUP
> > 2003-12-06
> 21:09
>
> > Please respond
> to
>
> >
> SAP on System i
>
> >
>
> >
>
> >
> >
> >
> >
> > Hi Per-Lennart,
> >
> > as described in note 392165 in point 9 (it is wrong, that it only
> > happens in 3-tier appl-servers!), you have to install the
following
> > both patches:
> > CRTR3SYS and CRTR3INST
> >
> > As you are using the old Kernel CD and now the new is patched on
the
> > SMP, you can't find these patches there.
> > I could suggest the following options to you:
> > - install the complete 1444 CD just now and proceed then
> > - get the CRTR3SYS and CRTR3INST *PGM from the new CD (e.g. from a
> > differrent kernel on another LPAR) and hope that they work
together
> > with this old kernel - it may be an UPDPGM on these EXEs
necessary,
> > with the program, you get a "Signature Violation".
> > - as the root cause of your problem is that the trans directory is
> > on a different host, you could change this to local as well.
> >
> > (if you find crtr3sys or crtr3inst in the r3setup directory, you
> > have to update them as well, because they are then most likely
> used!)
> >
> > As everything seems to be very complicated right now, we should
> > think how to optimize this for other customers. I think, these
> > problems will be fixed with the new EXT kernel, that will be
> > available in a few days, as these kernels replace the installation
> > sets as well.
> >
> > For you I would suggest to make the trans dir locally for
temporary.
> >
> > You can do this similar as follows:
> > - rmvlnk '/usr/sap/trans'
> > - addlnk '/usr/sap/trans' '/sapmnt/trans'
> > (I don't know the order in the last command - you should check the
> > F4)
> > - restart r3setup - it should work fine
> > - after r3setup is finished do it back again
> > - rmvlnk '/usr/sap/trans'
> > - addlnk '/usr/sap/trans' '/qfilesvr.400/as400name/sapmnt/trans'
> >
> > Hope, this helps
> >
> > Regards
> >
> > Volker
> >
> > --- In DoNotReply@consolut.eu, "Per-Lennart Andersson"
> > <peranderssonZc...> wrote:
> > > Hi all
> > >
> > > Trying to move one R3 system from one LPAR to another. Using
> > R3SETUP and
> > > command file DBR3CP.R3S. It stop in fase CRTR3SYS saying:
> > > ERROR 2003-12-06 14:51:28 CRTR3SYS_IND_DB4
> InternalInstallationDo:0
> > > Message ID . . : SAP0897
> > > Message text . : Could not execute CRTR3SYS SID(QN2)
> > >
> > > More information in in joblog saying:
> > >
> > > Message . . . . : Function not supported by file system.
> > > Cause . . . . . : An attempt was made to use a function which
> > was not
> > > supported by the file system for
> > path /usr/sap/trans/bin/TPPARAM. The
> > > path
> > > selected may not be valid for the function, or it may not be
in
> > the same
> > > file system.
> > > Function not supported by file system.
> > > Could not execute CHGPGP OBJ('/usr/sap/trans/bin/TPPARAM')
> > > NEWPGP(R3GROUP)
> > > DTAAUT(*RWX) OBJAUT(*ALL).
> > > Command CHGPGP failed. See previously listed messages in the
> > job log.
> > >
> > > I guess the problem is in TPPARAM and there I just delete the
old
> > entry for
> > > QN2 but the problem is still there after restart...
> > >
> > > Anybody any idea?? I'm on V5R2 (the old system V5R1) next
latest
> > DB and
> > > Java pack. R3 on 46C SR2. On the new system there are already on
> > 46C and
> > > one CRM 3.1.
> > >
> > > Regards
> > > **************************************************
> > > Per-Lennart Andersson
> > > Coca-Cola Drycker Sverige AB
> > >
> > > Tel +46 8 5007 5057 Mobil +46 70 320 5743
> >
> >
> >
>
> > consolut
> Sponsor
> >
>
> >
>
> >
>
> >
>
> > click
> here
> >
>
> >
>
> >
> [IMAGE]
> >
>
> >
> >
> > Have a look to our homepage at: http://www.consolut.net
> > DoNotReply@consolut.eu
> >
> > Your use of consolut is subject to the consolut Terms of
Service.
>
>
>
> consolut
Sponsor
>
>
>
>
> click
here
>
>
>
[IMAGE]
>
>
>
> Have a look to our homepage at: http://www.consolut.net
> DoNotReply@consolut.eu
>
>
Durban Tours - Südafrika Safari
RFUMSV00 - Advance Return for Tax on Sales/Purchases RFUMSV00 - Advance Return for Tax on Sales/Purchases
This documentation is copyright by SAP AG.
Length: 14114 Date: 20240426 Time: 204150 sap01-206 ( 4 ms )
