Kontakt

Ansicht
Dokumentation

12491 - 3.1I Installation doesn't get access to /QOPT

12491 - 3.1I Installation doesn't get access to /QOPT

Addresses (Business Address Services)   RFUMSV00 - Advance Return for Tax on Sales/Purchases  
This documentation is copyright by SAP AG.
SAP E-Book

3.1I Installation doesn't get access to /QOPT

Hi Max,

here is a small description how to do a "quick&dirty" system copy
very fast:
For all releases beginning up to 4.0B (All of this has to be done
(incl. CRTR3SYS) when a third tier is setup)
Log on as QSECOFR
Install an appropriate kernel-library
CALL FIXR3OWNS (<Kernel-Lib> *ALL)
ADDR3SYS SID(<SID>) TEXT('description') SYSTEM(<dbhost>) JRNRCVASP(1)
ADDR3INST SID(<SID>) INSTID(<INST>) TYPE(*CENTRAL) TEXT
('description')
At this point you should check the contents of the
file /usr/sap/trans/.sapconf. It may be errors for the new system in
there. So please compare these entries to the older systems and
adjust perhaps a little bit!
CRTR3SYS SID(<SID>)
Restore R3<sid>DATA (only required for test data copy)
If your Object-Owners or the journaling is not correct for the DB-
lib, you should issue the following command:
SBMJOB CMD(AS4FIXFILE DBLIB(R3<sid>DATA) CHGOWN(*YES)
ENDJRN(*YES) STRJRN(*YES) NEWOWN(*SIDOWNER))
JOB(AS4FIXFILE)
CRTR3INST SID(<SID>) SEQ(*CENTRAL or <INST>)
Now you should log on as <SID>OFR
APYR3KRN SID(<SID>) KRNLIB(<KRNLIB>)
Does R3<SID>JRN exist ?
Does the journal R3<SID>DATA/QSQJRN write to R3<SID>JRN ? (WRKJRNA
R3<SID>DATA/QSQJRN)
Start the system and do some checks, if it works fine
Attention: The profiles are now in the delivery-status and the all
already exported transports have to be exported again!

Regards

Volker
--- In DoNotReply@consolut.eu, "Schmid,Maximilian"
<maxel.schmidZz...> wrote:
> Hi Volker,
>
> thanks for your advice, but your hints don't work. I always get the
same messages as described further down.
>
> I use the 3.1I-SR1 Installation Kit. I like to make a copy of our
produktion system, but have to install a new SID, because there is no
old one. So I think I have to go till the copy of the database and
then cancel the installation process. Afterwards I would like to copy
the database as described in the homogenious system copy hint. I will
use the actual kernel of our production system as well, so I have to
do no extra patches.
>
> And well I use the old installation tools.
>
> So I'm still there where I was yesterday.
>
> Hope there is some other hint.
>
> Regards,
> Maxel :-))
>
> -----Ursprüngliche Nachricht-----
> Von: Volker Gueldenpfennig [mailto:volker.gueldenpfennigZs...]
> Gesendet am: Dienstag, 6. Januar 2004 16:30
> An: DoNotReply@consolut.eu
> Betreff: Re: 3.1I Installation doesn't get access
to /QOPT
> Hi,
>
> don't you have some older installation, what you can use with
> homogenious systemcopy and then deletion of clients ?
> Otherwise you have to install "millions" of Support Packs ...
>
> Are you using 3.1I or 3.1I-SR1 Installation Kit. SAP shipped about
3-
> 4 years ago the SR1 kit with 50-80 SPs included. This should work
> fine with the installation. What you are describing looks a bit
like
> the old installation tools. I'm not sure, if they will work on
todays
> OS versions.
> OPT01 is definetely wrong.
>
> But you could try the following:
> /qopt/<disk-label-name>
> or
> /qopt/<disk-label-name>/
> or
> /qopt in lowercase
>
> Hopefully one of these versions solves your issue. Do you see
> something useful in the joblog ?
>
> ... but, think on doing a copy instead of installation.
>
> Regards
>
> Volker
>
> --- In DoNotReply@consolut.eu, "Schmid,Maximilian"
> <maxel.schmidZz...> wrote:
> > Hi,
> >
> > I like to install a 3.1I-System on our 730. After executing the
> LODRUN-Command under User: QSECOFR I could not find the LIB:
> R3INSTALL (1 st problem). I run the command: GO R3MENU and
configured
> the System E03 and the Instance (22). According to the installation-
> book I signed on with User: E03OFR. I had to give this user extra
> priviliges to run the command: LODRUN (because there is no lib:
> R3INSTALL). After that I could enter the command: GO R3MENU to
> execute number 3 of it: INSTALL CONFIGURED R/3 SYSTEMS AND
INSTANCES.
> But this Command doesn't get access to our CD-Drive: /QOPT nor
OPT01.
> I always get the messages:
> >
> > Load Kernel CD in CD-drive, then select: (C or G)
> > ? G
> > Verbindung entfernt.
> > Verbindung hinzugefügt.
> > Load Kernel CD in CD-drive, then select: (C or G)
> > ......
> >
> > Every hint is appreciated
> >
> > Maxel :-))
> >
> >
> > Franz Zentis GmbH & Co. KG
> > Abt. EDV/ORG
> > Jülicherstr. 177
> >
> > D-52070 Aachen
> >
> > Tel.: 0049 (0) 241 / 4760-538
> > Fax: 0049 (0) 241 / 4760-77538
> > eMail: maxel.schmidZz...
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
>
>
>
> Have a look to our homepage at: http://www.consolut.net
> DoNotReply@consolut.eu
>
>
>
> consolut Sponsor
>
>
>
<http://rd.consolut.net/SIG=12cdd8u0g/M=267637.4116730.5333196.1261774/D=
egroupweb/S=1705123219:HM/EXP=1073489426/A=1853619/R=0/*http://www.net
flix.com/Default?mqso=60178356&partid=4116730> click here
> <http://us.adserver.consolut.net/l?
M=267637.4116730.5333196.1261774/D=egroupmail/S=:HM/A=1853619/rand=727
502969>
>
>
> _____
>
> consolut Links
>
>
> * To visit your group on the web, go to:
> http://groups.consolut.net/group/SAP on System i/
>
>
> * To unsubscribe from this group, send an email to:
> DoNotReply@consolut.eu <mailto:SAP on System i-
unsubscribeZconsolutgroups.com?subject=Unsubscribe>
>
>
> * Your use of consolut is subject to the consolut Terms of
Service <http://www.consolut.net> .
>
>
>
>
> [Non-text portions of this message have been removed]


 Durban Tours - Südafrika Safari

Vendor Master (General Section)   CL_GUI_FRONTEND_SERVICES - Frontend Services  
This documentation is copyright by SAP AG.

Length: 8132 Date: 20240427 Time: 010033     sap01-206 ( 3 ms )