Ansicht
Dokumentation
CPFC402 - Remote Server or enclosure not found. ( OS/400 )
BAL Application Log Documentation General Data in Customer MasterThis documentation is copyright by IBM.
Message : CPFC402
Remote Server or enclosure not found.
Message Long Text :
Cause . . . . . : The remote server or enclosure associated with the network server configuration (NWSCFG) &1 with IP address &2 was not found.
Possible causes:
-- The IP address in the NWSCFG(&1) does not match the IP address of the service processor of the remote server or enclosure.
-- The service processor in the remote server or enclosure is not connected to a network port that is accessible by an i5/OS LAN network connection.
-- The remote system is a blade server of a BladeCenter and the remote system identifier (RMTSYSID) from the remote system (*RMTSYS) network server configuration &3 is configured with a value of *SPNWSCFG. RMTSYSID must be set to the serial number of the blade server of a BladeCenter.
Recovery . . . :
-- Verify that the IP address is correct.
-- Verify that the service processor on the remote server or enclosure is connected to a LAN network port that is accessible by the i5/OS.
-- If the remote system is a blade server of a BladeCenter: use the Change NWS Configuration (CHGNWSCFG) command to change the RMTSYSID parameter of NWSCFG(&3) to the serial number of the blade server.
Message File : QCPFMSG
Library Message File : QSYS2924
RFUMSV00 - Advance Return for Tax on Sales/Purchases PERFORM Short Reference
This documentation is copyright by IBM.
Length: 3233 Date: 20240426 Time: 115929 sap01-206 ( 2 ms )