Ansicht
Dokumentation
CPI0B34 - Communications I/O adapter removed or failed ( OS/400 )
General Data in Customer Master General Material DataThis documentation is copyright by IBM.
![SAP E-Book](https://www.consolut.com/fileadmin/consolut/general/e-books_banner.jpg)
Message : CPI0B34
Communications I/O adapter removed or failed
Message Long Text :
Cause . . . . . : The system did not detect a communications I/O adapter which was detected on previous IPLs. The I/O adapter has type &1, model &2, and serial number &3. The direct-select-address was &4. The unit address was &5. &6 is the resource name. The part number is &10.
Recovery . . . : Do one of the following:
-- If the resource has been removed, use the WRKHDWRSC command to remove the item with resource name &6. WRKHDWPRD will automatically remove the item, if a new resource appears in the same slot.
-- If the resource is in an expansion unit that is powered off, follow correct procedures to power it on.
-- If the resource is installed and powered on, either the communications I/O adapter or the communications I/O processor may not be working correctly. Print this screen, or copy on paper the Serial number, the Message ID for this message, the system Machine type of &13, the system serial number of &14, the resource name &12, part number &10, part number &15, and the failing item code FI00100. Part number &10 should be replaced before part number &15. Use the ANZPRB command to report this problem, using the system machine type and system serial number that you printed or copied from this message.
Message File : QCPFMSG
Library Message File : QSYS2924
RFUMSV00 - Advance Return for Tax on Sales/Purchases BAL Application Log Documentation
This documentation is copyright by IBM.
Length: 3232 Date: 20240426 Time: 193146 sap01-206 ( 2 ms )