Ansicht
Dokumentation

CPI59CF - Network interface &30 failed, channel error occurred. ( OS/400 )

ABAP Short Reference   General Material Data  
This documentation is copyright by IBM.


Message : CPI59CF
Network interface &30 failed, channel error occurred.

Message Long Text :

Cause . . . . . : A hardware error occurred for the ISDN D-channel on network interface &30.
Recovery . . . : Do one or more of the following:
-- Use the Vary Configuration (VRYCFG) command to vary network interface &30 off, then on.
-- Use the VRYCFG command to vary network interface &30 off. Then use the VRYCFG command with reset (RESET parameter) specified as yes (*YES) if allowed to reset the input/output processor (IOP) and to vary network interface &30 on.
If the system sends a diagnostic message because other network interfaces are varied on that IOP, vary them off. Then vary network interface &30 on with the RESET parameter specified as *YES if allowed.
-- If the network interface is used for both switched and permanent channels, you may still be able to use the permanent channel. If you wish to operate without the switched channel, use the CHGNWIISDN to temporarily change the Channel Entry (CHLENTRY parameter) of the switched channel to *NONSWT, and vary the network interface on again.
If the problem continues, press F14 to run problem analysis.
Technical description . . . . . . . . : The error log identifier is &22. The error code is &40: A hardware error has occurred on the D-channel.

Message File : QCPFMSG
Library Message File : QSYS2924


RFUMSV00 - Advance Return for Tax on Sales/Purchases   ABAP Short Reference  
This documentation is copyright by IBM.

Length: 3247 Date: 20240427 Time: 065447     sap01-206 ( 3 ms )