Ansicht
Dokumentation
CPI7F2B - Error on network interface &30 during get configuration request. ( OS/400 )
BAL_S_LOG - Application Log: Log header data TXBHW - Original Tax Base Amount in Local CurrencyThis documentation is copyright by IBM.
Message : CPI7F2B
Error on network interface &30 during get configuration request.
Message Long Text :
Cause . . . . . : The I/O card Licensed Internal Code was unable to complete activation successfully since the get configuration request failed. The problem may have been caused by the following:
-- There are too many other high speed lines running on the same I/O processor card.
-- There may be too many service functions, such as communications trace, active on the I/O processor card.
-- The I/O card Licensed Internal Code may not be working correctly.
Recovery . . . : You may choose to ignore this message because your network interface is operational. If you are not satisfied with the operation of your communications equipment, reduce your communications work load by varying off network interfaces or lines or by ending service functions that are not needed. To determine which network interfaces or lines are active and use the same communications controller, use the work with hardware resource (WRKHDWRSC) command and specify type (*CMN). If the problem persists, press F14 to report the problem.
Technical description . . . . . . . . : The I/O card Licensed Internal Code issues a get configuration request and expects the configuration record to be returned. If the response indicates an error, this message is issued.
- Problem Log ID ........: &35
- Error Log ID ..........: &22
- Processor Resource ....: &26
- Adapter Resource ......: &27
Message File : QCPFMSG
Library Message File : QSYS2924
Fill RESBD Structure from EBP Component Structure BAL Application Log Documentation
This documentation is copyright by IBM.
Length: 3264 Date: 20240426 Time: 062323 sap01-206 ( 3 ms )
